JOINERS Magazine March 2026

SLIDO. IDEAS IN MOTION.

Lighting Essentials.

High efficiency,

and flexible,

COLUMNS

Master Joiners 4

Nathan Moore reflects on a difficult past year but notes a growing resolve across the industry as members adapt and refine their operations to position themselves for the year ahead.

Laminex Update 10

Rachel Silcock expresses cautious optimism for 2026 as she discusses developments at their Taupo board site and improved functionality in their online ordering system.

NKBA news 74

Rachael Kwok profiles Angie Edgar as the NKBA BCITO most promising student of the year and her path to full time kitchen designer.

Steering a Course 76

Ian Featherstone reinforces the harsh reality that being busy doesn’t always equal being profitable and now is the time to pay attention to margins.

Safety Series ibc

Laminex provide some pointers to ensure that health and safety isn’t just a box to tick but a daily commitment to keeping people safe.

REGULAR

News & Info 4 - 14

State of the Industry 78

NZJMF membership 80

Classifieds 88

Advertiser index 88

CNC efficiency 16

When processing panel and timber the CNC router often represents the most efficient option in terms of speed, optimisation and accuracy. Ongoing innovations to machines, tooling and software increase these efficiencies year by year. We look at some.

Pantry fit-out 32

At the heart of a workable kitchen is the pantry set-up, where visibility, access and use of space are prime objectives. We look at a range of pull-outs, wire-ware and racking all built for purpose and ready to install to your design.

50 It’s in the DNA

In every region of New Zealand you’ll find joinery businesses that stand out not just for their workmanship, but for the values, innovation and leadership woven into their DNA. Montage Kitchens & Joinery in Hamilton is one of those.

Assembly devices 54

From jig and drill guides, to specialised drilling and insertion machines and hand held jointing systems, there are a range of assembly devices to aid in drill placement, hinge insertion and material connection. We look at some examples that make the job easier.

Specialised bins 64

Following continued demand for clean, concealed bathroom storage solutions, Hideaway Bins introduce the new Concelo Bathroom Bin, engineered specifically for today’s bathroom cabinetry.

from the president 19.02.2026

Preparing for what’s ahead

Aswe move further into the year, it’s a timely opportunity to pause, assess where we are, and refocus on what lies ahead. While the past twelve months have placed sustained pressure on many businesses, there is also a growing sense of resolve across the industry. Members continue to adapt, refine their operations, and look for ways to position themselves more strongly for the future.

Conditions remain variable across the country. Some regions are beginning to experience increased enquiry and renewed confidence, while others are still navigating subdued workloads. This uneven recovery reinforces the importance of remaining flexible, informed, and engaged with what is happening both locally and nationally.

A key area requiring attention at present is health and safety. WorkSafe is currently very active across the country, with a strong focus on dust control, machine guarding, and hazardous substances. These are not new obligations, but enforcement activity is increasing, and inspections are becoming more frequent. It is critical that members ensure their workshops, equipment, and processes meet current requirements.

Beyond compliance, maintaining safe and well-managed workplaces protects our people, our businesses, and the reputation of our industry.

Upholding quality and professionalism continues to sit at the core of what it means to be a Master Joiner. In challenging times, shortcuts can appear tempting, but they come at a cost. Our commitment to proper systems, skilled workmanship, and high standards is what differentiates our members and provides long-term value to clients and the wider construction sector.

One of the enduring strengths of our organisation is the way members support one another. Staying connected through regional engagement, sharing experience, and participating at a national level strengthens our collective voice and ensures we are better equipped to respond to industry pressures as they arise.

Looking ahead, planning for the May conference is well underway, with early interest already indicating strong attendance. This event will be an important opportunity to come together, exchange ideas, and reset our

focus as an industry. Members are encouraged to secure their place early, as numbers will be limited.

It is also important to acknowledge the passing of Paul Bowden, who made a significant contribution to Master Joiners over many years. Paul served as President of Auckland, National President from 1999–2000, and Senior Vice President in 1999 under Gary Turner, as well as spending time on the executive. His commitment to the organisation and the industry more broadly was considerable, and his service is sincerely appreciated.

While challenges remain, there is opportunity ahead. By staying engaged, maintaining high standards, and looking out for one another, we can continue to build confidence and momentum as the year progresses.

Together, by leading with integrity, safety, and craftsmanship, we shape a stronger future for our industry.

Nathan Moore National President, Master Joiners

Processing, fitting & assembling

Wellhere we are, another three months down the road. It will be a topsy turvy year what with the elections later in the year so we will all need to be on the ball. The signs of economic activity from late last year are still there. A big part of what joiners and cabbies do involves CNC and related software. We have a some of the latest in this issue. Being up to date and informed is going to be really important this year I think. That’s why seeing what is out there will be also important. In this issue we have features looking at CNC machinery, the latest in pantry pull outs in the kitchen and a look at a variety of assembly devices that make manufacturing and assembly a whole lot easier.

Of interest for those in the machinery world I note that the well known Holzher agency here in New Zealand has been assumed by Farnese NZ Ltd. This is important as it means this established brand is still available here. On a broader base we have the next Master Joiners Conference coming up in mid May in Queenstown at the famous Millbrook estate and golf course. If you are into golf this is right up your alley! A little shorter in length this time but still have the all important Master Joiners Awards being presented. Looking forward to it. Have a look at the MJ website for more details.

On a regional level it is good to see local chapters are being active with their memberships. Good example here in Auckland is the annual fishing trip run by the Auckland Association. Two boats again I hear. Lots of fish to be caught! A word about the Master Joiners team out of Wellington: a shout out for them as they do a good job in challenging times. Look forward to seeing some of them in Queenstown down the track

Time to read on

Bob Nordgren

Official Publication of the New Zealand Joinery Manufacturers Federation magazine

The magazine for the joinery, cabinetmaking & kitchen manufacturing industries

Editor Michael Goddard michael@joiners.net.nz

Publisher Bob Nordgren bob@joiners.net.nz

M42 Aldersgate Rd, Box 27-513, Mt. Roskill, Auckland, 1440. Ph: +64-9-624 4680

Subscriptions & Mailings bob@joiners.net.nz

JOINERS Magazine Online www.joiners.co.nz

ISSN 1173-6836

JOINERS Magazine is the official publication of the New Zealand Joinery Manufacturers Federation. It is distributed to members of the joinery, cabinetmaking and kitchen manufacturing industries and is published quarterly in March, June, September and December. Advertising statements or editorial opinion are not necessarily those of the publisher, its staff, the New Zealand Joinery Manufacturers Federation Inc., or their executives, unless expressly stated. All articles printed in JOINERS Magazine are subject to copyright and cannot be reproduced without the express consent of the Publisher or the authors therein. Advertisements and articles are accepted without liability as to the accuracy or otherwise of the factual matters represented.

Helping create inspired New Zealand interiors.

NZ Panels Group is the country’s leading manufacturer and distributor of interior products with a range that covers pressed decor panels, benchtop surfaces, sinks and taps, commercial washroom products and particleboard flooring.

Discover more at nzpanels.co.nz

Buy NZ Made Buy Master Joiners Made

There’s something satisfying about seeing MADE IN NEW ZEALAND on a product It’s more than a sticker - it’s a sign of local skill, local jobs, and quality that is inherently kiwi.

That’s why in December 2025 Master Joiners Inc. became officially licensed to use the Buy NZ Made trademark. And members can now be part of it too!

Registered Master Joiner members can now apply online to become licensed NZ Made users, and receive a 10% discount on the first year’s licence. Not bad for a mark that instantly tells customers their timber joinery and cabinetry is genuinely made here at home.

In a market full of imported options, the NZ Made trademark helps cut through the noise - highlighting New Zealand made products, including NZS 4211 compliant timber joinery.

This is a simple way to back local industry and help consumers choose Master Joiners made quality.

Buy NZ Made.

Buy Master Joiners Made.

What are you waiting for?

Contact marketing@masterjoiners.co.nz for more information

Crafting the future

22 - 23 May, Queenstown

An important industry event that helps you connect and grow. Be inspired by a variety of memberled business talks, keynote speaker, and interactive sessions, all about joinery business skills. Get involved - your experience helps shape industry talks, and builds our community. Share your knowledge , learn new things, and connect with other joinery professionals from around NZ.

The event is held at the beautiful Millbrook Resort and includes the prestigious Excellence Awards Dinner. Spaces are limited and will be given on a first-come, firstserved basis. Registration closes on 3rd May 2026 or once maximum numbers have been reached.

Visit conference.masterjoiners.nz to find out more information and register your spot!

Translucent architecture ‘AMC Kitchen Lab’ at Espacio Cocina SICI 2026

The designer and interior architect Francesc Rife presents a revolutionary exhibition project that will bring together both the exhibition area of ‘AMC Kitchen Lab’ and the conference and show cooking area of the next edition of Espacio Cocina SICI.

The specialized trade fair for kitchen furniture and equipment has already reserved more than 50% of the planned exhibition space and anticipates a successful event alongside Feria Hábitat València, Textilhogar, and the new initiative 360 by Cevisama.

Espacio Cocina SICI presents the new exhibition project for one of its most distinctive spaces the ‘AMC Kitchen Lab’, which returns after its debut in 2024 and which in this edition will be conceptualized by renowned designer and interior architect Francesc Rifé, who will opt for a dynamic and fluid concept through translucent spaces.

The kitchen as a dynamic and fluid element

The project for the ‘AMC Kitchen Lab’ 2026 space starts from a fundamental idea: the kitchen as a social threshold, a space that

The kitchen as a spatial resource capoable of opening, concealing and transforming its identity according to use.

has historically functioned as a place for meeting, exchange, and thought. Rifé’s project recovers this primary condition, but translates it into a contemporary language where the kitchen ceases to be an exhibited object and becomes a spatial system: capable of opening, concealing, and transforming its identity according to the use at any given moment.

From kitchen to patio, from gallery to studio, the space assumes the rhythm of the fair without losing clarity or coherence. In this sense, the constructive image is based on a translucent architecture, understood not as absolute

transparency, but as a filter that humanizes light and allows one to intuit what is happening inside without fully revealing it. The modular structure allows each exhibitor to maintain its identity, but under a common image recognizable at pavilion scale.

Francesc Rifé

Interior architect and industrial designer, Francesc Rifé (Sant Sadurní d’Anoia, 1969) founded his studio in Barcelona in 1994. Influenced by minimalism and shaped by a family history linked to craftsmanship, he structures all his work around spatial order and geometric proportion.

Feria Valencia will host from September 28 to October 1, 2026 the joint celebration of Feria Hábitat València, together with Textilhogar, Espacio Cocina SICI, and the new initiative 360 by Cevisama. This initiative is expected to exceed more than 110,000 m² of exhibition space with nearly 1,500 exhibiting companies and brands.

for more go to www. espaciococina.feriavalencia. com/

Investing in local

It’s great to be back. While the weather was unpredictable, I was fortunate to beable to spend time away from Auckland to step back and recharge in a beautiful part of New Zealand during the long weekends.

This year is a significant one for Laminex. In 2022, we announced our investment in a new wood panels production plant and finishing line at our Taupō site; we’re excited to see the first board come off the line in July! While Dieffenbacher machinery is used around the world, this project has been particularly complex, requiring extensive customisation to suit New Zealand conditions. We’re proud that this significant investment will allow us to produce products designed specifically for the needs of the local joinery and construction sectors, supporting both current and future demand

You may have seen in the news about the sale of the Fletcher Construction Division. This is an important step that enables our business to sharpen its focus on the manufacturing and distribution of building products, clearly aligned with our ongoing investment in the Taupō plant.

While I remain cautiously optimistic about the year ahead, the market outlook remains tough to read. Inflation is higher than expected, some major banks have taken steps against this increasing interest rates, and it is an election year. The South Island continues to see more positive activity, and while there are signs of improved confidence, this is coming off a low base.

With that in mind, our focus for 2026 is sticking to our core, reducing complexity and delivering a better experience for our customers. In the lead up to Christmas we had higher than expected demand from the South Island, leading to some service and delivery challenges. In response, we are increasing storage capacity and expanding our core range in the South Island to better support the building activity. More detail will be shared soon.

For customers using online ordering, we’re excited to launch in March search and filtering functionality. Orders can now be searched by your own purchase order or date range, with up to 12 months of sales history available. If you’re not already ordering online and would like to you can sign up via laminex.co.nz/ecommerce-registration.

We recently launched eight refreshed design styles along with guides, designed to support homeowners during the research phase of their journey. These tools will help homeowners define their style and set clearer expectations, particularly around budgets, and generate more informed leads for our customers on our ‘See and Buy’ platform.

We’re only three months into the year and already have plenty of positive updates to share. Over the next few publications, you’ll hear from other members of the Laminex Senior Leadership Team as they outline their priorities and the work underway across the business. I look forward to keeping you updated as we continue building momentum through 2026.

Rachel Silcock General Manager Laminex New Zealand

New BCITO

CEO appointed

The Building and Construction Industry Training Organisation (BCITO) has announced the appointment of Jason Hungerford as its new Chief Executive Officer. He joins BCITO at a pivotal time following its transition to a Private Training Establishment (PTE) in January.

BCITO Chair Phil Brosnan said Jason’s appointment reflects the organisation’s focus on stability, sector leadership and long-term impact for learners and industry.

“Jason is a highly respected leader with a strong understanding of skills development and the construction sector. He knows our organisation well, having previously led BCITO during the RoVE transition into Te Pūkenga.”

Jason Hungerford said he was pleased to be joining BCITO at a time of opportunity and change.

“Vocational education is critical to economic prosperity, and our sector accounts for around 10 per cent of New Zealand’s workforce. As our environment shifts and construction picks up again, demand for skilled workers will increase. I’m really motivated by the opportunity to reset and strengthen relationships, accelerate innovation, and strengthen BCITO’s position as a leader in vocational education. It’s exciting to be leading BCITO at this time, helping build a strong and resilient pipeline of construction talent when New Zealand really needs it.”

Kantek move premises

Auckland specialist edgebanding and kitchen componentary supplier Kantek has recently moved its office and warehouse facility from Cryers Rd in East Tamaki, to 6 Echelon Place, East Tamaki. All other contact details remain the same.

Product Release

660 COLOURWASH

To provide natural & decorative colours for interior timber products

• Application friendly

• Solvent based timber stain

• For interior use

• Designed tp prevent pooling or blotching

• Can be used with multiple clear coats

• Available in a wide range of the latest fashionable colours

USES

Designed as a high quality furniture stain for kitchens, shop fittings, cabinets, desks, panelling, partitions and most interior wood.

Information please

DISTRIBUTORS

Whangarei Paint Centre

Whangarei (09) 430 2414

Wairau Paint Centre

Auckland (09) 443 3430

PPG Industries NZ Ltd

Auckland (09) 573 1620

Auckland (09) 278 0685

Autolink Distributors Ltd

Hamilton (07) 846 1443

Linkup Paints (BOP) Ltd

Tauranga (07) 571 8921

Complete Paints Ltd

Napier (06) 843 1122

Total Paint Supplies Ltd

New Plymouth (06) 769 9415

Total Body Shop Ltd

Wellington (04) 586 6681

Paintco

Nelson (03) 546 6660

PPG Industries NZ Ltd

Christchurch (03) 384 0255

Rainbow Paints Ltd

Dunedin (03) 474 0659

Southern Paints

Invercargill (03) 218 4664 December 2024

Grayson Auto Colour Centre

Joiners are practical people

if they join an association, it’s because there’s a point

When a business becomes a Master Joiners member, it’s a statement ! It’s about backing the profession.

There are plenty of tangible benefits to membership that do exactly that. Clients may not know the difference between a CNC machine and an edge bander, but they do know what credibility looks like. Being part of a respected industry body signals that a joinery business takes its work seriously.

A joinery career includes ongoing learning opportunities. Access to courses enables members to continuously develop their workforce competencies. Materials change, expectations change, and no business wants to be doing things the hard way just because “that’s how it’s always been done ”.

Key events like the annual Conference, the Excellence Awards, and regular branch gatherings empower those peer discussions — part professional development, part celebration, it’s a chance to talk shop with others in the profession (without anyone’s eyes glazing over halfway through).

Membership connects businesses to support, resources, and creates a collective voice for the industry. Master Joiners provides access to a fair complaints process when things get tough. As much as everyone aims for perfection — issues and misunderstandings happen, and sometimes a good outcome just needs the right structure around it.

But the real value of membership is the connection. Joinery can be an eclectic mix of craft, business, problemsolving, and controlled chaos. One day it’s beautiful work leaving the workshop, the next it’s chasing suppliers, rewriting quotes, or shaking hands with a happy customer. It helps knowing it’s not being done in isolation.

Master Joiners creates a wider community of people who understand the pressures, the pride, and the constant balancing act of running a business while still caring deeply about quality.

It also helps lift standards across the profession. Membership is a quiet way of saying: this work matters, and it’s being done properly. No one’s pretending membership makes the deadlines shorter or the clients easier. But it does provide a steady ease in the background. It’s not about being flashy. It’s about backing the craft.

And in a profession built on precision, pride, and work that lasts, that’s worth more than another badge on the front door.

Misco Joinery

First to be certified

Rehau

NZ Ltd, well known for providing a range of window, building, furniture, industrial and automotive solutions recently introduced their Laser Welding Certification Service here in New Zealand. Already successfully introduced in Europe, by being certified as a Rehau LaserEdge partner it offers greater customer confidence with proven quality and a seamless edgebanding finish, what Rehau call the Zero Joint Standard.

Andrew Whisker, National Sales Manager Furniture for Rehau NZ was recently down in Kaiapoi to present the first such certificate issued in New Zealand to Misco Joinery based in Kaiapoi. Bob Nordgren from JOINERS Magazine spoke with Lauren Martin, General Manager about the certification programme.

“We’re delighted to receive this certification from Rehau. We design, manufacture and install kitchens across both the commercial and residential sectors throughout New Zealand, so continually upskilling our knowledge and deepening our understanding of processes like edge banding is incredibly valuable,” Lauren says. “It strengthens our team’s expertise and ultimately gives our customers even greater confidence in the quality of finish we deliver.”

Misco Joinery, a Master Joiners member, was established back in 1988 based from the 3500 square metre purpose-built factory site since 2015 with a state-of-the-art showroom. “As a bespoke, high-volume manufacturer operating four laser edge banders, maintaining absolute confidence in the quality of our product is

essential — which is why Certification was such an important step for us,” Lauren says. “The programme gives us a clear framework to test and validate our edging performance, ensuring we consistently achieve the ‘Zero Joint Standard’ — a benchmark that sits at the heart of our manufacturing process.”

For more information contact Misco Joinery, 62 Williams St, Kaiapoi, ph 03 383 4384 or visit their website www.misco.kiwi

Farnese expands its arsenal with HOLZ-HER

Farnese New Zealand is proud to announce a new partnership with HOLZHER, strengthening the local offering of premium woodworking technology and support for manufacturers across New Zealand.

As part of the Weinig Group, HOLZHER is internationally recognised for advanced solutions in CNC machining, drilling and panel processing—and is particularly well regarded in New Zealand for its high-performance edgebanding range. This cooperation unites a globally respected machine portfolio with the kind of on-theground service infrastructure that customers rely on when production schedules matter.

Local support, built for uptime Farnese will extend its strong reputation for service and support to all HOLZ-HER customers— both existing and new. With a substantial spare-parts inventory held in New Zealand and a nationwide team of six technicians, the partnership is designed to deliver what workshops value most: reliable machine availability, responsive technical help, and minimal downtime.

Faster access to the right edgebander

To further reduce lead times, Farnese will progressively hold stock of key HOLZ-HER edgebander models locally. This ensures customers can access the right machine faster—whether they are running a smaller shop focused on flexibility or a higheroutput environment where throughput and repeatability are critical.

Selected edgebanding models will also be available for demonstration at the Farnese showroom in Auckland, allowing customers to see finish quality, handling and automation options first-hand before making an investment decision.

Farnese will hold stock of key HOLZ-HER models locally giving customers improved viewing options and faster delivery.

A finish advantage: Glu Jet for seamless joints, PUR PRO for easier PUR operation

A standout USP of the HOLZHER edgebanding line is its Glu Jet glue application system— engineered for clean, consistent adhesive application that supports exceptionally tight, “seamless” joints and premium visual results. For customers who work with PUR, HOLZ-HER also offers the unique PUR PRO system, especially designed for the use of PUR adhesives while minimising cleaning effort. A vacuum-based sealing concept helps prevent PUR from reacting during standstill phases—reducing unnecessary curing inside the system and making day-to-day handling far more practical for real workshop conditions.

The result is a clear customer benefit: high-end edge quality with a process designed to support reliable operation and efficient maintenance—particularly important for businesses producing value-added products where finish quality directly influences selling price and customer satisfaction.

Nesting range now available under the HOLZ-HER brand

In addition to edgebanding solutions, the well-known and recently updated Farnese nesting machine range will now be available under the HOLZ-HER

brand name Panel Center. This creates a more unified portfolio for customers—covering nesting and panel processing requirements under one internationally recognised brand, supported locally by Farnese’s service structure.

Comments from Farnese Rob Hutchings, General Manager at Farnese, said the partnership is a strong strategic step for the New Zealand market:

“We’re genuinely excited to represent HOLZ-HER in 2026 and beyond. Combining our local experience, resources and technical capability with the strength of the HOLZ-HER brand puts us in a great position for the future—while continuing to deliver the personal service our customers value.”

Comments from Robert Terzer, Weinig Panel Division Robert Terzer, Managing Director of the Weinig Panel Division, added:

“We are excited about this new cooperation with Farnese and see strong potential in the New Zealand market for our machine range. In particular, the high-end finish quality of our edgebanders is something customers truly enjoy— because it adds measurable benefits and higher value to their

products. Whether it’s kitchen cabinetry, office furniture, or any other application where a perfect finish is essential, HOLZ-HER technology helps manufacturers achieve premium results with confidence. With Farnese’s local support and customer proximity, we believe this partnership is the right platform to grow together long-term.”

A partnership focused on performance and trust This cooperation is built on a shared goal: giving New Zealand manufacturers access to premium machinery with the local support needed to keep production running smoothly. With strong technical coverage, local parts availability, showroom demonstrations, and a broadened product offering— including nesting solutions now under the HOLZ-HER brand— Farnese and HOLZ-HER are ready to support workshops as they modernise, expand, and compete on quality.

For service, support, demonstrations, or sales advice, contact Farnese today.

NEW FOR 2026

Farnese is proud to partner with HOLZHER, bringing you industry-leading solutions backed by expert sales, service, and support.

Get in touch today to learn how Farnese and HOLZHER can support your business—every step of the way.

CNC routers efficient processing

When it comes to processing panel and timber the CNC router often represents the most efficient option in terms of speed, material optimisation and accuracy. Ongoing innovations to machines, tooling and software increase these efficiencies year by year, we canvased local suppliers on their latest editions.

Building living spaces.

From furniture to homes: The future is built with wood.

Together, HOMAG, WEINMANN, SYSTEM TM and KALLESOE provide comprehensive production solutions for manufacturers of optimized timber, engineered wood, timber construction, interior fittings, furniture and more. With over 500 years of combined experience in machinery engineering, automation systems, and software technology, our focus is on building strong partnerships that enhance your productivity, precision, and profitability. This is how we are building living spaces. Together, with you.

the seamless integration of handling, storage and distribution ensures continuous production, reduced waiting times and constant optimization of every process step.

The evolution of integrated production lines

Biesse, a multinational company based in Pesaro, manufactures lines, machines and components for the processing of wood, glass, stone, metal, plastic and composite materials, bringing a complete value proposition to increasingly dynamic and multidimensional markets.

Within this offering, Biesse Technic stands out as the most advanced part of the Group’s portfolio: the brand dedicated to integrated production lines, embodying the company’s maestria and technology, created to address the growing complexity of industrial processes involving wood, glass and stone.

Biesse Technic is the answer to evolving manufacturing, offering solutions that simplify complexity and support industrial growth.

Biesse Technic’s integrated production lines are designed to optimize processes and ensure full control over the production cycle for the creation of multi-material products. Thanks to the Start, Run and Art segmentation, it is possible to identify the solution best suited to each customer’s needs.

The official debut of the brand took place at Ligna 2025, the leading biennial international trade fair for the wood industry, where Biesse Technic presented a multimaterial production line: a concept designed to deliver a complete

and immersive experience, with live demonstrations, finished components, digital simulations and a dedicated launch video capturing the essence of the brand.

Biesse Technic’s product portfolio includes single-process and multiprocess lines with intralogistics and material-sorting solutions designed to simplify production flows for the wood, glass and stone sectors, effectively meeting the needs of the furniture, window and door, and construction industries.

Each line is engineered to streamline workflow, reduce downtime and enhance overall plant efficiency, thanks to a safe and intuitive technology layout that minimizes operator movement.

Intelligent material flow is a key element of Biesse Technic solutions: the seamless integration of handling, storage and distribution ensures continuous production, reduced waiting times and constant optimization of every process step. Materials are managed dynamically and intelligently, guaranteeing coordinated and high-performance workflows — from real-time feeding to optimized storage of semi-finished parts and outbound logistics.

SCM showcase world trends in wood & panel processing

Driving the future of woodworking through the integration of advanced technologies, proactive services and digital innovation is the goal of the SCM open house at SCM headquarters in Rimini, Italy in March. Visitors will be able to explore a wide range of machines, automated systems, software and services designed to support the production of every component of the home - from furniture to timber construction, from surface treatment to flooring, from wooden windows and doors to aluminium solutions.

A series of innovations will showcase a new era of woodworking innovation, where competitive advantage is defined by the ability to integrate processes into connected, flexible and sustainable production models. In addition particular interest will also be drawn to strategic partnerships with the Group’s newest companies, Tecno Logica who focus on integrated systems & robotics, and Mecal Machinery, specialists in aluminium, PVC and light-alloy processing.

Digital systems and services

The event will put the spotlight on an Integrated Service Ecosystem designed to provide companies with more efficient production, thanks to technologies that transform machine-generated data into actionable support. At the core of this is WinMES, SCM’s Manufacturing Execution System, the digital brain of the factory. By integrating and interpreting realtime data, it optimizes production flows, speeds up operational decision-making, and enhances overall plant reliability.

Integrated machining cell

An integrated sizing and nesting cell for Batch 1 production combining advanced automation, operational flexibility and reduced energy consumption, the cell is composed of:

• Flexstore HP, the automatic storage system managing all panel formats, retrieving offcuts and organising sorting in advance to support the cell’s logistics.

• Gabbiani GT 2 singleblade panel saw, fed by the automatic storage system and an anthropomorphic robot, performing single or book cuts with high productivity. Thanks to Maestro Stackwise software, it optimises panel arrangement, reducing waste and increasing yield.

• Morbidelli X200 CNC machining centre with integrated robot for automatic offloading into organised stacks and temporary parking, ensuring gentle, non-sliding handling and maximum flexibility from loading to the finished piece.

New CNC machining centres

Designed for processing both solid wood and panels, two new models will be unveiled:

• Accord 400 with the new “flexmatic pro” worktable featuring automatic positioning of pods and clamps, it is available in pre-set configurations depending on the application to provide a solution that suits the customer.

• Accord 500 edge which stands out from the rest of the range thanks to the H80C “Compact” edgebanding technology, which allows operations with various types of edges and glues and enables the automatic change of edge application type.

Panel processing

The new Gabbiani AF beam saw range introduces several key innovations: unrivalled production times thanks to new rapid work cycles, advanced motorization systems, an innovative saw blade carriage with power up to 27 kW, and operational units optimized

to reduce energy consumption while maintaining high-precision cutting results.

In edgebanding, flexibility will be the keyword across the showcased solutions such as the Stefani M, new edgebander equipped with servo-assisted operating units that ensure precision and ease of use. The “Multiedge” system enables extremely fast, error-free changeovers with a single click.

Also in evidence the Celaschi P20, new automatic double-end tenoner, the most compact in the range, it stands out for high productivity and precision, ideal for small and medium-sized enterprises producing wooden panels and alternative materials for construction, insulation, industry, doors and solid wood components.

Solid wood processing

For the first time the Windor NT1 angular machining centre will feature the new "Optima BR" drilling-routing unit, which allows the user to carry out all complementary machining, including horizontal milling, and features the innovative Maestro active windoor software interface. Also in the spotlight is the Superset NT automatic throughfeed moulder equipped with the new "eye-S" console

fitted with 10” colour touchscreen display and the Maestro active 4-side software, for the machining of profiles for windows, doors, stairs, beads, frames and furnishings.

Timber construction

SCM will present the new Area GL 5-axis CNC machining centre, engineered to ensure high performance, precision and reliability in the machining of straight and curved glulam elements intended for public building roofs, multi-storey buildings and infrastructure projects. Key features include a work area up to 5×50 metres and the possibility to perform pendulum machining thanks to exclusive mobile fences.

Finishing solutions

The focus of surface finishing will be the matt effect, a growing trend in the furniture world. Superfici will unveil Supermatt , a new physical matting system capable of achieving ultra-low-gloss finishes with a velvety tactile effect and outstanding durability. Physical matting becomes straightforward and expands the aesthetic possibilities of coated surfaces.

Aluminium machining

For the first time on display at Rimini, the MC 307 Falcon by Mecal Machinery. This 4-axis machining centre for aluminium, PVC, and steel profiles ensures high precision and productivity. It is the fastest in its class (up to 150 m/min) and stands out for its flexibility in machining aluminium profiles for both doors and windows, as well as furniture components.

Morbidell m200

where solid wood meets solid precision

This highly modular machining centre provides answers to all the problems associated with woodworking. Just a few clicks to design and manufacture pieces of any shape, the machine is run by the Suite Maestro which has specific modules for every production cycle. Unique on the market in having an unrivalled priceperformance ratio, it can be configured according to the customer’s needs and investment plan.

JQX 5-axis spindleTV FLEXMATIC work table

FREEDOM

360° access. Optimizing the space within your factory thanks to the Pro-Space solution. Maximum ergonomic load, the absence of perimetral protections allows access to the work table from all sides of the machine.

QUALITY

FAST 14 tool changer

SPEED

Unmatched finishing thanks to the JQX (Just Quality eXtreme) 5-axis directdrive spindle head which ensures the total absence of vibration even with huge material removal at high speed, and the high-performance drilling heads with RO.AX (Rotoaxial) spindles and rotation speed up to 8000 rpm.

60% time saving in drilling cycles thanks to the rapid machining/cycle time and devices that reduce the idle times. No downtimes for set-up operations with the TV FLEXMATIC work table and less than 15 seconds for a tool change with the FAST14 tool changer.

FLEXIBILITY

The machine can cope with every type of wood element: panels, single elements, kitchen doors, windows, the configured solution for all your needs and your investment plan.The unit can accommodate up to four machining units, including a device for inserting dowels using pearl glue.

For stairs, wooden joinery & furniture making

Boosting joinery production

Horizontal storage system STORETEQ F-100 feeding panel dividing saw SAWTEQ S-300 and CENTATEQ N-500.

Practical paths to smarter panel processing

Smalland medium-sized joineries often reach a point where they need to change how they work. Orders might be growing for kitchen fit-outs in Auckland, bespoke furniture in Wellington, or joinery packages for new builds across Canterbury. Yet lifting and shuffling heavy sheets is still part of the daily routine. That time spent on manual handling takes away from skilled work and slows production.

Hiring more people or adding extra hours is not always the best answer. Often, the smart move is to look closely at how panel processing is done and choose equipment that keeps material moving without exhausting the team or stretching the budget. For workshops where space is tight, skilled labour is valuable, and materials come from local mills or imported board suppliers, the right mix of CNC machining, automated storage, panel saw integration, and even robotassisted unloading can make a real difference.

CNC processing center CENTATEQ N-500

Understanding where delays begin

In many joineries, delays start before the first cut. MDF, or laminated panels often arrive stacked but not in job order. Someone has to rearrange them, then lift each sheet onto the saw or CNC bed. While cutting is in progress, the machine might pause between jobs while panels are loaded or cut parts are carried away. Those small delays, repeated across dozens of sheets in a week, add up to hours of lost production.

CNC + Automated Storage and Feeding

Installing a modern CNC machining centre such as the CENTATQ N 500 is a step toward continuous, precise production. With a work area around 4,300 mm by 2,200 mm, it handles fullsized panels common in cabinetry manufacturing. A maximum processing height close to 85 mm allows flexibility to work with thicker laminated timber tops or composite panels used in commercial interiors.

The N 500’s 12 to 15 kW spindle is suitable for all panels typically processed in a joinery, maintaining feed speeds of 60 to 80 m/min without losing quality. CAD/ CAM integration means projects designed in PaletteCAD can be optimised in Cut Rite and run directly on the machine, with no manual re-entry.

Pairing this with a STORETEQ F 100 turns panel handling into a parallel process. The F 100 uses a vacuum suction beam to lift and position panels from stacks directly onto the CNC processing machine. It copes easily with the common board thickness range of 8 mm to 50 mm and fullsheet sizes. While one panel is being CNC processed, the next is already being loaded, so there’s no delay as operators lift and align the following sheet.

(continued over page)

Control your material flow

From small to large: Horizontal storage systems for every requirement.

HOMAG horizontal storage systems optimise material flow to keep machines working at full capacity. Combined with woodStore, they manage every panel with accuracy – supporting faster production cycles, reducing manual handling, and freeing resources for higher value tasks.

Scan the qr code for more information.

Boosting joinery production (cont)

For a workshop handling a mix of kitchen panels, this combination means the CNC is never idle and operators spend less time lifting, more time on skilled assembly or finishing.

CNC + Storage + RobotAssisted Unloading

In busy joineries that run steady workloads extending automation beyond loading has clear appeal. Adding robot-assisted unloading transfers parts off the CNC bed immediately after cutting.

Robotic systems with suction cups lift pieces and set them onto self-lowering lifting tables. In a shop producing large kitchen batches from melamine-faced particleboard, this means the CNC runs without stop while unloading happens in parallel. Operators aren’t tied to lifting components off the CNC machine they can move straight into other highvalue tasks such as quality checks, finishing detailing, or preparing the next assembly stage.

Because the CENTATQ N-500 can maintain high feed speeds while routing or drilling, the removal bottleneck in many workshops shifts away from cutting and toward lifting. Robotassisted unloading removes that

bottleneck entirely, keeping workshops efficient across both continuous production runs and custom batches.

In practical terms, the orchestration between the CNC and robot is handled through the same CAD/ CAM pipeline used for cncprocessing. When the software sends tool paths to the CNC, it also compiles position data for part pickup by the unloading system. This ensures that regardless of whether the shop is processing laminated panels or engineered timber panels, each component leaves the machine sorted and ready for the next process.

Panel Dividing Saw

Integration: SAWTEQ S 300 + STORETEQ F 100

Not every small or medium joinery needs CNC capability. Many find greater value in optimising high volume straight cuts for modular furniture or cabinet carcasses. The SAWTEQ S 300 is designed for accurate, high speed cutting and can handle full sized panels up to approximately 4,300 mm in length, which matches the common sheet formats.

The machine clamps panels firmly, and the blade cuts cleanly through, producing chip free

Coupling the S 300 with a STORETEQ F 100 gives the same loading advantage as the CNC setup. Panels are vacuum lifted from stacks into correct position as the previous cut finishes. The sequence is predetermined, matching job requirements, so there is no need to reshuffle material mid process.

edges even on pre finished boards. The CADmatic control system accepts cut lists from optimisation software, eliminating paper lists and manual sizing.

Coupling the S300 with a STORETEQ F100 gives the same loading advantage as the CNC setup. Panels, whether they are melamine boards for a residential kitchen or MDF sheets for an interior fit out, are vacuum lifted from stacks into correct position as the previous cut finishes. The sequence is predetermined, matching job requirements, so there is no need to reshuffle material mid process. This combination is especially effective for shops delivering to clients on tight deadlines, where mistakes or mis cuts mean more than wasted material: they can cause costly delays on site.

Integrated Workflow with NZ Relevant Software Links

Integration between machine hardware and design software is what makes automation practical for smaller teams. In a New Zealand context, many workshops already use locally supported versions of CAD or work with joinery-focused software such as Cut Rite to plan, optimise, and schedule.

In the improved workflow, the job is drawn and detailed in CAD, producing exact dimensions for each piece. Cut Rite converts this into efficient cutting patterns, minimising waste across MDF, plywood, and solid wood panels. The plan is sent digitally to the CENTATQ or SAWTEQ, while the STORETEQ is instructed on panel order and origin.

For a joiner working with both laminates and plywood, this means less time crosschecking lists and more time producing accurate parts. The link between software and machinery removes human error from sequencing and positioning, a common cause of downtime in manual panel processing.

Safety, Ergonomics, and Workforce Wellbeing In the smaller joinery, the same tradesperson may design, cut, edge, assemble, and install. Repeated heavy lifts strain backs and shoulders, cutting careers short and reducing skill availability over time.

Automated feeding by the STORETEQ or robotic unloading after CNC eliminates most of those repetitive strains. Vacuum beams lift panels in a smooth arc,

(continued over page)

DRILLTEQ H-230

The perfect start in the 6-sides-processing technology

• The 4-fold linear changer offers an individual selection for different requirements and is positioned on the side of the machine to save space.

• 2 CNC-controlled clamping devices ensure permanently firm and precise positioning of the workpieces – regardless of the speed

• The DRILLTEQ H-230 offers a comprehensive safety concept with a safety fence that protects on three sides. A light barrier prevents intrusion into the work area. A guard above the movable collets additionally protects the travel area and ensures operator safety during machining.

Boosting joinery production (cont)

self-lowering lifting tables - always at the best height.

keeping surfaces intact and edges safe from knocks. With fewer lifts per day, operators can work more comfortably, staying sharper for precision tasks.

The result is a healthier workplace. Apprentices, too, benefit, learning safe handling habits alongside the latest CAM integration means they grow into a trade that values both physical safety and technical skill.

Sustainability in the NZ Setting

Improved panel processing dovetails naturally with sustainability goals. Many joineries often prefer to keep value local and importing only when certain products or finishes can’t be matched locally. The combination of efficient cutting patterns, careful waste separation, and integration of tracked stock through the STORETEQ makes it easier to prove chain-of-custody for every board or sheet.

Waste is reduced in two ways: optimised nesting of parts across full sheets and gentler handling, which prevents accidental damage leading to scrap. Offcuts from laminated particleboard can be stored neatly for later

small components, while surplus material can be repurposed into trim or specialist furniture pieces.

Achievability for Smaller Teams

The perception that integrated CNC, storage, and robotic systems are “factory only” investments is changing. Phased adoption allows smaller shops to implement automation without halting work to reconfigure the entire floor.

One common progression starts by installing the STORETEQ F 100 alongside existing saw or CNC, immediately relieving the loading bottleneck. When the shop is ready, upgrading the machinery equipment to a CENTATQ N 500 for flexible cnc-processing or a panel diving saw SAWTEQ S 300 adds capability without requiring extra operators. Robotic unloading then becomes the final stage, closing the loop so both sides of the machine run without manual handling.

Because HOMAG Australia provides local technical support and service coverage for New Zealand, downtime for installation, operator training, and maintenance can be kept to a minimum. Parts, expertise,

panel processing is both the beating heart of production and, all too often, the choke point. Addressing that with intelligent automation means more than faster machines. It means materials handled in the right sequence, cut cleanly, and passed to the next stage without pause or strain.

and help are accessible through their regional network, meaning workshops don’t have to rely on distant international channels for assistance an important reassurance for SME owners investing in new production technology.

Setting the Pace for Growth

For small and medium joineries, panel processing is both the beating heart of production and, all too often, the choke point. Addressing that with intelligent automation means more than faster machines. It means materials handled in the right sequence, cut cleanly, and passed to the next stage without pause or strain.

The CENTATQ N 500, with its large working envelope, high spindle power, and automatic tooling, gives precision for diverse work found in joinery shops from urban commercial interiors to rural homestead kitchens. The SAWTEQ S 300 provides straight cut reliability for high volume carcass and panel jobs, handling the common sheet sizes with exactness. The STORETEQ F 100 transforms both by ensuring a panel is always ready to go, lifted and aligned while processing continues.

Robot assisted unloading extends that gain, removing more strain from the team and feeding the next stage of production automatically, making consistent throughput possible even in small workshops.

By embedding these improvements into everyday practice, joineries can protect the well being of their people, retain more value in manufacturing, and stay competitive in markets that demand both quality and timely delivery. With the right choices, even modest sized shops can set a production pace that keeps them ahead while still honouring the craft and character that make New Zealand joinery unique.

www.homag.com

Leitz cnc tooling for Shaker Door precision

The enduring appeal of shaker-style cabinetry shows no sign of slowing in 2026. Defined by clean lines and understated detailing, shaker doors remain a favourite across both contemporary and classic kitchen designs. While the profile may appear simple, achieving consistent, highquality results relies heavily on precision CNC tooling.

From MDF and solid timber to coated panels, shaker door machining demands crisp edges, clean corners and chip-free finishes. This level of accuracy starts with tooling designed specifically for the task. Poor tool selection can quickly lead to tear-out, rework and inconsistent profiles, costing time and margin.

Leitz has developed a customisable shaker door tooling package to support cabinetmakers and kitchen manufacturers looking to streamline production without compromising finish quality. Rather than a one-size-fits-

all solution, each package is configured to suit the customer’s CNC machine, materials and workflow.

The tooling combination is designed to cover every step of shaker door machining. High-performance hogging tools efficiently remove bulk material, while V-groove and profiling cutters create precise, symmetrical detail. Downcut spiral routers ensure clean edges

on veneered or coated panels, and fine-diameter tools deliver sharp internal corners and refined radii. For manufacturers seeking distinctive styling, optional profile tooling can be tailored to specific door designs.

What sets Leitz apart is the balance between performance and longevity. Tooling is available in solid carbide or diamond-tipped options, delivering longer tool life, reduced downtime and consistent

results across large production runs. With German engineering backed by local support, Leitz tooling is trusted by manufacturers who demand reliability and repeatability.

Whether you’re refining an existing shaker door setup or scaling production, the right CNC tooling makes all the difference. Leitz works closely with customers to deliver fit-forpurpose solutions that improve efficiency, reduce rework and elevate finished product quality.

For more information or to discuss your shaker door tooling requirements, contact Leitz on 0800 578 665 or email sales@leitz.co.nz.

Harvey Woodcraft from passion to profession

Operating out of an unassuming workshop on the eastern edge of Christchurch’s CBD, Harvey Woodcraft is a recent fixture on the street. Owner Nic Harvey has been operating commercially for around 8 years, but only expanded into commercial premises just over a year ago.

Originally from the UK, Nic came to NZ around 20 years ago. An avid climber world-wide, after the Christchurch earthquakes he was one of the specialist team who reinstated road access from Sumner to Lyttleton – regularly spending 8 hours a day abseiling down cliffs and removing unstable boulders from above the road.

As well as climbing, Nic always had a passion for woodworking. He was attending night classes in Furniture making at ARA, Christchurch’s polytechnic. Eventually he moved from passion to profession, and struck out on his own. His first customers were friends or came via the hardware store he was working in at the time. Recommendations followed and the work started to flow in.

Over the next four years, Nic balanced his business and night classes at ARA’s woodworking courses. By the time he finished his studies, his garage was packed with machinery — including a basic CNC. Alongside this, he had developed strong software skills using SketchUp and the specialist joinery plug-in CabinetSense, and had built a solid reputation for creative, high-quality joinery across a wide range of projects. As demand grew, however, both the available space and the capacity of his machinery were stretched beyond their limits, making it clear that a change was needed.

Soon after moving into the premises Harvey Woodcraft operates from today, Nic significantly increased his production capacity. “I knew I needed a new CNC to make the numbers work,” he says. “I’d

With a 12 station tool magazine, a 9kW spindle and a 2850 x 1220mm table size, KDT’s KN-2409DL offered Nic Harvey the versatility and speed he was looking for.

been weighing up the options and reading plenty of online reviews, but I decided that local support was just as important as the quality of the machine. That’s why I chose a KDT from Jacks.”

That local support proved invaluable almost immediately.

On the day of delivery, Nic was unable to be on site due to family illness. “I was gutted — I had everything planned,” he recalls.

“But Mark, Ian, and Martin from Jacks stepped in, handled the unload, and positioned the machine exactly where I wanted it. It was spot on.”

That level of support has continued ever since. “Any issue or question I’ve had has been sorted quickly — whether that’s a technician on site or support provided online.”

With a 12 station tool magazine, a 9kW spindle and a 2850 x 1220mm table size, KDT’s KN2409DL offered Nic the versatility and speed that he needed to grow. “Being able to cut 2750mm sheets has been a huge advantage,” he says. “We promote the ‘bespoke’ nature of our work, and the flexibility of the KDT really fits our style.”

With the accuracy and speed of the KDT, Nic’s been able to take advantage of new opportunities. “As well as kitchens and wardrobes, we’ve worked on jewelry displays, specialist wardrobes, desks, vanities and bookcases. And whereas previously I was paying for contract cutting, now I’m doing the same for others.”

As well as his CNC, Nic knew he needed to upgrade his edgebanding capacity, so alongside his KDT is a new Felder G380, also from Jacks. The G380 fits nicely alongside the rest of his Felder machinery: a KF 700 saw/spindle, an A3 31 planer thicknesser, and extraction units.

A phrase that has stayed with Nic is, “Master your craft firstthen master the business.” Just over a year after expanding into new premises and upgrading his machinery, his focus has shifted beyond production alone. He understands that mastering the tools is only part of the equation. Building a well-run and sustainable business is equally important, and marketing, in particular, is a clear focus. The immaculately organised workshop radiates competence and

professionalism – key attributes of Harvey Woodcraft’s brand strategy. “We keep things smart and efficient–both in here and online,” Nic says.

A significant proportion of Nic’s work comes via his website, Facebook and Instagram work. “You’ve got to keep the content feeds up,” he explains. “I’m often taking photos or video during construction. I regularly get work from people who have seen our work online and get in touch. With the new machinery to back up our marketing, we’ll manufacture whatever they need.”

When he’s not out measuring up, quoting, or installing, Nic is happy overseeing the production in the workshop. “I love it when the KDT is cutting, we’re edging, and the workshop is humming. Not only is it what I enjoy doing, a busy workshop means we’re making money!” Harvey Woodcraft might have started small, but with the balance of passion, smart marketing and a focus on the business side, Nic has managed what many of us can only dream of: to turn a hobby into a living.

PCS Recognises potential accidents before contact with the sawblade, and defuses the hazardous situation within milliseconds

No damage to the sawblade

A premium level of safety with no need for new training PCS is ready to be used again at the push of a button

Felder’s PCS® Preventive Contact System is now available on the Felder 700 Seriestechnology previously exclusive to the premium Format4 range.

HBK for the personal touch

HBK Kitchens has a reputation as a kitchen manufacturer offering a genuine personalised design service. The business is owned and operated by husband and wife team Patrick and Rachel Fromont from their factory site in the Napier suburb of Greenmeadows. They have recently made some changes and bought some new machinery that has greatly improved their business. Bob Nordgren from JOINERS Magazine caught up with Patrick to find out more.

Patrick operates what is known these days as a nest based manufacturing operation for the making of kitchens. “Our focus has always been on delivering a truly personalised design service

to our customer base here in Napier,” he comments. “With some twenty years experience in the joinery and kitchen manufacturing business we have developed a business model that has worked well for us.” Running the business relies on having a good team and good machinery.

With this in mind Patrick and Rachel have always been on the lookout for ways to improve their business.”In more recent times we have been looking at ways to increase our productivity,” says Patrick. “in particular increasing our efficiency.” Central to nest based manufacturing is a sound

CNC router. About six months ago after a good look around they settled on a Farnese Apex 1228 Auto Labelling line from machinery supplier Farnese NZ.

“This system was ideal for our factory site which is a long narrow one. It offered us efficiencies we had not had before including really good optimisation software, a sixteen tool changer, 9 position drill head (a real time saver) and an auto labelling system with an auto load and off feed table. With a solid gantry based system this machine offered us a really efficient and safe production line with a forklift to load board on and off.” Patrick says. The PC control offered user friendly Windows 11 operating system so getting up to speed was an easy process as well. “When you are striving to always produce high quality product as we are, this setup matches our custom design service efficiently allowing for on

As installed at HK Kitchens - good optimisation software, a 16 tool changer, 9 position drill head and auto labelling system, with an auto load and off-feed table.

CNC

time production for our clientele.” The business now has three in the office involved in the design side and another six staff on the floor. “Rob and his team from Farnese NZ did their part as well with the quick install and back up service.”

And down the track? “Having made this investment we will be keeping our eye on new developments as they emerge. For the time being it is simply full steam ahead,” says Patrick.

For more information contact Patrick at HBK Kitchens 10 Gloucester St, Greenmeadows, Napier, mob 027 755 9529, email sales@hbkkitchens.co.nz or visit www.hbkkitchens.co.nz

TITAN 5 AXIS CNC

Discover precision and performance with the Farnese Apex CNC machine, featuring a 9kW router, versatile drilling, and automatic material handling for seamless efficiency. Elevate your production line today!

Experience unparalleled precision and versatility with the Titan 5-Axis CNC machine. Its advanced multi-axis capabilities streamline complex machining tasks, boosting productivity and efficiency for top-tier manufacturing.

Pantry fit-out

At the heart of a workable kitchen is the pantry set-up, where visibility, access and use of space are prime objectives. We look at a range of pull-outs, wire ware and racking all built for purpose and ready to install to your design.

ALUNAN T

DRAWER BASED PANTRY STORAGE

Flexibility

Simple and convenient Each side extension panel is designed with its own selecting the correct components is easy.

Simple System

Thoughtful modular design

3 standard drawer heights cover your bases with railing and side extension panels allowing versatile customisation

3 DIMENSIONAL ADJUSTMENT

Flexible and Easily Accessible

ALUNAN T offers easily accessed, effortless adjustment options in three dimensions – height, side and tilt –making it easy to keep cabinet fronts aligned.

Maximise the Value of Your Space with Pull-Out Storage.

Storage for easy access.

ENGINEERED BY

Utensio ST Plus. Excellent Value to Performance Ratio.

The new Utensio Plus range features thoughtful details that truly enhance the product experience. Engineered by Häfele, the range has been designed with the end user in mind — ensuring they enjoy their internal storage solutions for years to come.

Features

• Easy to clean trays with antibacterial coating.

• Simply adjust tray heights to suit your cupboard contents.

• Engineered by Häfele.

• Soft close action for smooth, quiet operation.

• Tool-free tray installation and removal.

• Universal handing.

Step into a world where your kitchen becomes more than just a place to cook — it becomes a centre of calm, clarity, and connection. The Utensio range transforms everyday routines into seamless experiences, offering smart, elegant solutions that bring order to chaos and beauty to function.

Whether you’re a homeowner seeking simplicity or a professional looking for performance, Utensio delivers an excellent value to performance ratio. From intuitive pull-out systems to space-maximising corner units, every product in this collection is engineered to last and crafted to inspire. With Utensio, every item has its place, every movement has purpose, and every kitchen becomes a true family centre.

Discover how good organisation leads to great living.

Trigon Corner.

Mondo Corner.

The Mondo is a space-efficient unit that looks small but can fit bigger items like mixers and large electric woks. Because the shelves rotate out to you it’s easy to pick them up and lift to the counter.

MONDO is a quality German made product that is designed to last the test of time and features premium quality anti-slip trays.

Features

• Doors pivot and rotate with the shelves - giving you uninterrupted access to the contents of the cupboard.

• Supplied as a fully assembled carcase without doors.

• High quality antislip trays in grey.

• Available in 800 or 900mm widths.

• 25kg load capacity per shelf.

The TRIGON corner unit from Ninka is smart and innovative –Adding over 40% new storage space compared to a standard corner.

The new corner cabinet solution uses almost every square centimetre behind the cabinet door and features an organic breath-taking silhoutte, high-quality finishes as well as extraordinary technical features. Available in traditional ‘Semicircle’ corner and now availabe in ‘Double Corner’ version.

Features

• Scratch-resistant surface with fine dimpled structure.

• Stepless and toolless installation and removal of the pull-out shelves.

• Simple height adjustment.

• 25kg load capacity per shelf.

• 100% recyclable material.

• Can be retrofitted in blind corner.

Practical storage thoughtfully designed

Ashousing density continues to increase across New Zealand, kitchens are being designed within ever-tighter footprints. Townhouses, apartments, and compact family homes now make up a growing share of residential projects, placing greater emphasis on how effectively internal storage is planned and fitted out. And this design practice carries through to our most luxury homes, where elegant function is highly prized.

Tall cabinets, in particular, play a critical role in achieving this balance. When fitted out thoughtfully, they can deliver substantial storage without expanding the kitchen footprint. When poorly planned, they risk becoming deep, hard-to-reach cavities where space is lost to poor visibility and awkward access. This is where pantry fit-out componentry becomes central to contemporary kitchen design.

Hettich’s Olona pull-out pantry has been developed with these realities in mind, offering a

component-based approach that prioritises visibility, accessibility, and the efficient use of narrow cabinet space.

Olona Design

Olona is designed specifically for 300 mm and 400 mm cabinet widths, allowing slim vertical spaces to be used effectively rather than left under-utilised. A height-adjustable centre upright forms the backbone of the system, enabling flexible shelf positioning and left- or right-hand configuration.

Clip-on shelves, adjustable uprights, and integrated runners allow the fit-out to be configured to suit both the cabinet and the user’s storage needs. Supplied as easy-to-order kits, the system simplifies specification.

Alongside its functional intent, Olona has been designed to contribute to the visual order of a pantry interior. The system is available with Design Line 200 and Design Line 400 shelf options,

The Olona Pull-Out Pantry by Hettich

allowing the fit-out to be tailored to both aesthetic preference and practical use. Design Line 200 features closed steel trays with integrated anti-slip mats, offering a more contained look and added security for stored items. Design Line 400, with its flat wire railing and HDF base, creates a lighter, more open appearance that reinforces visibility and makes pantry contents easy to read at a glance.

Finished in powder-coated anthracite, both design lines sit comfortably behind hinged doors, complementing contemporary cabinetry without drawing attention away from the furniture itself. The consistent material language, combined with adjustable shelf positioning, helps maintain a tidy, structured pantry interior supporting both the functional and visual expectations of modern kitchen design.

Compact Function

Pantry fit-out solutions now need to support compact footprints

without compromising usability, clarity, or everyday convenience. Hettich’s Olona pull-out pantry reflects this reality through visibility, accessibility, and the efficient use of narrow tall cabinets. By bringing contents forward, structuring storage vertically, and making slim spaces work harder, Olona offers a practical pantry solution suited to townhouses, apartments, and contemporary family homes alike.

For joiners and cabinetmakers working within these constraints, it provides a thoughtful approach to pantry design, one that responds directly to the demands of modern, space-efficient living.

For Sales enquiries

Our friendly customers service team 0800 438 842 | sales-nz@hettich. com or reach out to your Territory Manager for more information

Visit www.designwithhettich.co.nz

ALL NEW STORAGE SYSTEMS

Hettich’s Interior Fittings range is the result of German engineering precision and Italian design. Crafted for kitchens, living spaces, and wardrobes, these systems maximise storage potential while maintaining a clean, sophisticated aesthetic.

From pull-out shelves to tall-unit systems and innovative corner solutions, each product is designed to optimise access, improve ergonomics, and seamlessly integrate into diverse interior styles. Its order made easy.

Supported by and integrated with Hettich’s broader ecosystem of products, the Interior Fittings form part of a complete, harmonised approach to furniture functionality.

With an emphasis on quality, adaptability, and long-term performance, Hettich enables designers, manufacturers, and homeowners to create interiors that are as practical as they are beautiful.

For Sales enquiries

Our friendly Customer Service team 0800 438 842 | sales-nz@hettich.com Or reach out to your Territory Manager for more information

THE RANGE

PANTRY STORAGE

1. Olona pull-out pantry, full extension with integrated Silent System soft-closing and optional upgrade for soft-opening

BASE UNITS

2. Lario 2 tier pull-out

[Not pictured]

• Naro single internal drawer

CORNER CABINETS

3. Orta corner unit pull-out with individually extending rear shelves

4. Salso corner unit swivel pull-out with individually extending shelves

[Not pictured]

• Goro corner unit pull-out

• Senio corner unit swivel pull-out with individual fronts

www.designwithhettich.co.nz

Premium hardware for exceptional cabinetry. Because the details matter. designwithhettich.co.nz shop.hettich.com/nz_EN/

SPACE TOWER Smart Storage Sorted

The pantry is a staple part of every kitchen. Hungry? Check the pantry. Bored? Check the pantry. Shopping list? Check the pantry. The need for a functional, ergonomic, and easily accessible pantry is more important than you’d think.

Every home is different, so at Blum, we believe that no one pantry fits all - it should be customised for every home, whether for a couple or a large multi-generational family, a budget-friendly option or a highend designer build. EVERYONE deserves a pantry that suits their needs. Enter SPACE TOWER, the cabinet application of every snack lover's dream.

SPACE TOWER is the perfect pantry because it is completely customisable for every kitchen. From the joiner’s perspective, it’s essentially just a stack of Blum inner drawers behind a full-height door, which means you can match the other LEGRABOX, MERIVOBOX or TANDEMBOX drawers throughout the rest of the kitchen without needing to change your planning or machinery.

From the homeowner's point of view, it’s a pantry with ergonomic access to all three sides, clear visibility and can be tailored to fit their kitchen, no matter how wide or tall. There’s a good reason SPACE TOWER is Blum’s most googled product. Available in all Blum box systems, let's have a closer look at the benefits of each drawer system.

SPACE TOWER in LEGRABOX

Blum’s premium drawer offers extra space where it matters most, with the box system boasting an impressively slim 12.8 mm drawer side. LEGRABOX is available in classic silk white and orion grey, as well as carbon black and stainless steel finishes. The elegant

drawers can be installed with glass fronts and sides, offering even more visibility. Along with an impressive 70 kg weight-bearing capacity and smooth, stable motion, LEGRABOX drawers are arguably the finest on the market.

SPACE TOWER in MERIVOBOX

The latest Blum box system to hit New Zealand has become a popular staple in workshops. The box system has a range of design options: open-sided gallery rails, closed-in BOXCAP sides, or a sleek high-side, all with the same drilling positions. That makes planning, ordering and installing straightforward for the cabinetmaker, no matter which style the customer selects. Like all award-winning Blum box systems, MERIVOBOX features 3-dimensional adjustment for simple installation, full-extension opening for full use of storage and proven long-term quality. An allrounded crowd favourite.

SPACE TOWER in TANDEMBOX

The original Blum double-walled box system is a strong contender, loved by cabinetmakers and joiners throughout NZ. TANDEMBOX is our classic, tried-and-trusted value drawer option, and it's the perfect fit for your everyday kitchen. The no-frills drawer range offers all Kiwis the ergonomic and accessible benefits of SPACE TOWER with practical and highquality longevity.

Whether it’s for your high-end architectural kitchen or entry-level cheerful space, every kitchen deserves the benefits of a Blum SPACE TOWER. Visit shop.blum. nz to compare and order a SPACE TOWER for your next job.

www.blum.com

Storage Solutions where the finish matters

These days kitchen storage is front and centre — it’s what makes a space comfortable, efficient and stylish. Want a kitchen that looks great and actually keeps you organised? Kantek Ltd partners with Samet and Menage Confort to make that happen, turning everyday tasks into easier, more enjoyable moments.

Samet, a global specialist in furniture fittings, puts intelligent storage and advanced drawer systems at the heart of modern kitchen design.

Flowbox ultra slim drawers run on synchronized full extension runners with soft close action, gliding smoothly and closing quietly even when full. Slim side profiles, available in 4 height options, maximise internal capacity, and configurable interiors — from shallow cutlery trays to deep pan drawers with dividers and modular inserts — keep utensils and crockery items tidy and within reach.

Since 1987 Menage Confort has solved corner cupboard headaches with clever swivel baskets and pull-out corner systems that bring items to you, eliminating bending and stretching. Everything’s visible and accessible, right where you need it. From Dolphin Sliding to Magic Corner Pull-outs, we offer a range of reliable options. These systems increase usable storage, eliminate wasted space and optimise kitchen tasks for efficiency and convenience.

Vertical solutions are essential in compact homes: tall cabinets with pull-out pantries and multi level shelving or baskets use every inch so dry goods and bottles don’t get lost at the back-they stay organized and easy to reach.

Pull-out storage units are designed to fit under benches and often between appliances to enhance and improve your storage capacity and keep those oils and condiments handy.

Even awkward under sink areas are transformed with pull-out frames and adjustable trays that work around plumbing while keeping cleaning supplies neat and accessible.

The result is a kitchen that’s cleaner, more practical, and just better designed.

Partner with Kantek to create smart kitchen storage solutions that meet your customers’ needs — where function and finish come together.

of

For the last 40 years Kantek has been adding the finishing touches to joinery, cabinetry and furniture projects across New Zealand. We pride ourselves on sourcing premium products from Europe to compliment your project. We combine this with decades of meticulous experience to get results that stand the test of time.

REVEGO V3

Engineered

for how joiners actually work

Now available in NZ, REVEGO has become even simpler to install, with a wider range of options, thanks to a series of thoughtful refinements in a version 3 release. The optimisations have been made based on global industry feedback to support the workflows of joiners and cabinetmakers. Because when speed, accuracy, and consistency matter, every small refinement makes a big difference.

Half-height door options

The door front range has increased, offering on-bench height REVEGO with a new front height range of 1130–2980 mm. The expanded range enables REVEGO to be integrated into a broader range of projects.

Fewer screws, faster installation

REVEGO uno now requires just 19 screws per door front, saving 34% of screws, while REVEGO duo has been streamlined to need only 35 screws instead of 73that’s a reduction of 52%. Meaning less drilling and noticeably faster assembly, helping joiners move through installs with greater speed.

Lighter components

The REVEGO track weight has been reduced by around 30%, and the hinge bracket set is approximately 3 kgs lighter. Even the packaging has been optimised, with the hinge bracket set box size now almost half what it was.

Improved ergonomics

The height adjustment has been moved to face height, preventing the discomfort of working at floor level.

Simplified installation

REVEGO duo doors can now be installed in two parts, removing the need to hang both doors simultaneously. Easier and lighter for one person to do alone.

Standardised planning

Pocket profiles now feature a consistent drilling dimension, making layout and preparation more straightforward, so joiners can move through setup faster with fewer measurement checks and adjustments.

Effortless operation

Once installed, the door releases from the pocket with noticeably less resistance, enhancing the user experience for everyone, from the workshop to the kitchen.

With these refinements, REVEGO continues to deliver on Blum’s commitment to creating innovative, installer-friendly

solutions, helping joiners save time, reduce complexity, and achieve an exceptional finish.

The new REVEGO components and planning can be found using Blum’s online services, such as Product Configurator in E-SERVICES and online in Blum Shop. Touch base with your Blum Account Manager or visit www. blum.com/revego to find out more about the exciting enhancements we’ve made to REVEGO!

Domus Line D-Motion Dual Colour puts the power in your hands

Scan for Domus Line D-Motion Dual Colour time lapse video.

Always on the lookout for ways to make life easier for their trade partners, the team at FIT have recently added D-Motion Dual Colour and Freecut technological advances to their Domus Line LED lighting range.

What is D-Motion Dual Colour?

Domus Line's D-Motion Dual Colour range includes both Natural White and Warm White light colours in one LED strip module. FIT have made D-Motion Dual Colour available across four different LED strip options: AT6 Pro, SE H4-24 Pro, UHE6B CSP and SHE6B PW.

Why is D-Motion Dual Colour great for you and your clients? For kitchen makers, cabinet makers and joiners, you'll no longer need to stock two light colour variants, so if you hold LED stock, you'll have less funds tied up.

For your clients, they no longer need to agonise over which light tone will be best for their kitchen, laundry, bathroom or wardrobe. They can trial both Natural White and Warm White in situ after installation and choose the one they prefer, or they can alter it any time to suit their mood and vibe –maybe that’s crisp, clear Natural

White for making work and school lunches in the morning, and the golden glow of Warm White when entertaining.

All D-Motion Dual Colour strips are supplied with double power cords, meaning you can trim them and reuse the offcuts, saving both waste and money.

Whether you're a maker, specifier, designer or a homeowner, and whether you’re looking for LED strip for surface mounting, recessing or within a profile, D-Motion Dual Colour puts the power in your hands!

FREECUT? What’s that?

FREECUT innovation means you can cut LED modules at any point rather than at predetermined gradations, meaning there are no unlit sections after installation.

AT6 Pro and SE-H4-24 Pro are the D-Motion Dual Colour LED strips that offer FREECUT, plus they also have super slim end caps

ensuring the entire strip can be flush panel recessed and the power cord may exit axially or radially to the installation surface.

Sensors for D-Motion Dual Colour

Domus Line’s highly functional TOM Touch Sensor and GIRO Remote Control System are both now available as D-Motion versions, providing off/on, brightness control and colour temperature functionality for D-Motion Dual Colour lighting modules.

For more info about the Domus Line range, check the Lighting section of FIT’s website or contact your Fit rep, phone 09 431 0025 or email info@fit-nz.co.nz to discuss your requirements.

easyLINING

polytec expands its NZ range offer with pre-finished panels

With polytec now gaining traction in the New Zealand market, a raft of new products will be added over the course of this year.

First to launch is the easyLINING Boston Oak™ Collection – a highly versatile range of interlocking pre-finished panels that are quick and easy to install. Available in six signature woodgrain colours from the Boston Oak™ Collection, you can choose from the on-trend Convex profile or the classic Channel profile.

Crafted from high-quality, moisture resistant MDF, and finished in hard-wearing vinyl, each board features a concealed tongue and groove join for a clean, refined look.

Suitable for both residential and commercial interiors, easyLINING combines style and practicality in equal measure.

The ability to create a cohesive look across both wall paneling and joinery proved a huge attraction for specifiers when launched into the Australian market and it’s expected to do the same in New Zealand.

Use to create a high quality, seamless finish for feature walls, add impact under benchtops and bar areas, or for a host of retail and commercial applications.

Key specs:

• Both profiles are available in 2700mm lengths and sold in packs of 4.

• 15mm thickness

• Convex profile is 133mm wide with a coverage of 118mm

• Channel profile is 120mm wide with a coverage of 105mm

• Colours available include Boston Oak, Blonde Oak, Ecru Oak, Rubra Oak, Manor Oak and Blackened Oak

easyLINING is a versatile, designled solution that allows joiners to achieve interiors with a consistent material palette and high-quality finish. Now in stock at polytec’s Auckland warehouse making for prompt delivery.

Innovation in the blood

In every region of New Zealand you’ll find joinery businesses that stand out not just for their workmanship, but for the values, innovation and leadership woven into their DNA. Montage Kitchens & Joinery in Hamilton is one of those businesses - a company shaped by a remarkable founder and now carried forward by the next generation with the same drive and determination.

The late Ken Monk, founder and long time leader of Montage Kitchens & Joinery was well known throughout the NZ joinery sector. His influence reached far beyond the walls of the business he built. Ken held multiple leadership roles nationally, contributing to training standards, industry development and professionalisation of the trade. Although his passing eight years ago was sudden, the business he shaped didn’t lose momentum - because his passion and philosophy didn’t leave with him.

Today, Montage is led by Ken’s son Jared, a builder by trade who stepped up to run the company with the same commitment to quality, and forward-thinking attitude. Jared’s brother Michael also joined 18 months ago, strengthening the family leadership and helping carry the business into its next chapter.

Just like his father, Jared has a keen eye for any advantage that can improve quality or efficiency. That mindset traces back to Ken’s early adoption of CNC technology - including the purchase of an

ICAM CNC almost 30 years ago, long before CNC became the industry norm.

Laser edgebanding the next leap forward

That same drive for smarter technology led Jared to explore laser edgebanding. The result was an investment in a KDT KE 710BT Laser edgebander, supplied and supported by Jacks. The KE-710BT is a machine that replaces the traditional glue-pot with a laser unit that activates a 0.2 mm functional layer on the back of laser tape. When heated, the layer

melts and bonds the tape directly to the workpiece edge - creating a seamless, welded finish with outstanding strength.

The journey to the purchase began when Jacks Sales Consultant John Walton introduced Jared to KDT laser technology. One of the initial concerns was the supply of laser tape in New Zealand, but after some research - including calls to suppliers - Jared found that local supply was strong, and some suppliers can even coat any non stocked laser tape with a laser polymer.

The KE-710BT is a machine that replaces the traditional glue-pot with a laser unit that activates a 0.2 mm functional layer on the back of laser tape. When heated, the layer melts and bonds the tape directly to the workpiece edge - creating a seamless, welded finish with outstanding strength.

The next step was assessing the machines themselves. After comparing options across all the usual brands, KDT stood out.“KDT were the only brand offering a true laser. Others were using hot-air or other technologies that came with compromises.” Price, build quality, spare parts costs and performance all lined up. While there was some internal apprehension to buying a Chinesemade edgebander, Jared wasn’t concerned; “There’s good Chinese and bad Chinese — just like there’s good European and bad European.”

A visit to the Jacks Auckland showroom for a demo sealed the decision. The KDT’s finish quality, sturdy construction and the simplicity of running a true laser made the choice easy.

The KE 710BT Laser was installed and producing jobs within just a few days.The machine’s 10 servo motors allow quick, repeatable adjustment and the servo controlled scraper is especially valuable for acrylics with protective foil - ensuring no tape lip remains after the film is removed. With no warm up time required for the laser, productivity has increased noticeably.The notching feature has also been a game changer for shadow-handle cabinetry. Previously, gaps had to be blocked out or taped to “fool” a traditional edgebander. Now the notch dimensions are simply entered, and the KDT handles it automatically. Equally

as important, after 4–5 months of operation, the team at Montage has noticed how consistently the machine holds its settings.

While laser tape is roughly twice the cost of standard tape, Montage quickly discovered the maths still works in their favour. With no glue to clean off panels and the machine, no wait times for glue to heat-up - and then cool again when making a colour change, overall, the numbers stack-up in favour of using laser tape.

Under Jared and Michael’s leadership, Montage has continued to expand. They have recently added a pre-hung door and wardrobe division, with further development already in the pipeline. Their late father Ken would no doubt be proud - not only of the business his sons are running, but also of the values they’re carrying forward: craftsmanship, innovation and a commitment to doing things properly.

Assembly devices

from simple jigs and drill guides, to specialised drilling and insertion machines, to hand held jointing systems - there are a range of assembly devices to aid the cabinet and furniture maker in drill placement, hinge insertion and material connection. We look at some examples that make the job easier.

VIRTUOSITY IN ANGLES WITH TOTAL PRECISION

Extremely fast, time-saving, versatile joining method. Cut, connect, done. THANKS TO THE P-SYSTEM

ZETA P2

• Biscuit joiner for the production of the form-locking P-System groove

• The fastest joining method – Cut, connect, done.

• Wide range of connectors for different applications

Impossible angles made easy

Working with Lamello made Richard Langston and the team at RK Carpentry rethink their whole way of working and pushed their furniture designs to new levels of intricacy and complexity.

There aren’t too many workshops at the very top of their game whose owners would admit to completely changing the way they work because of a plastic fixing. Come to think of it, there aren’t too many manufacturers of plastic fixings that would inspire furniture-makers to push the boundaries of their designs to new levels of intricacy and complexity either. But one has. And for RK Carpentry, teaming up with them proved to be a game-changer.

Richard Langston, co-owner of RK Carpentry, encapsulated the reasons why he is so enthusiastic about Lamello’s range of fixings and biscuit joiners pretty neatly when he told me, “I wouldn’t go back to edgebanding by hand because I have an all singingall-dancing edgebanding machine. Why would I go back to manufacturing a cabinet like I did six or seven years ago?”

It has to be said, RK’s cabinets aren’t just regularly-shaped, mass-produced, made-to-a budget base and wall units that need to snap together once and stay put. Richard, his business partner Kieran Nelhams and their team of craftsmen have made a name for themselves designing and making kitchens and dressing rooms for the well-heeled and they’ve become especially well known among the cognoscenti of the interior design world for creating unusual designs that often involve seemingly impossible angles most cabinet-makers would shy away from.

“We started using Lamello in the summer of 2020,” Richard tells me. “I’d seen Lamello’s Zeta P2 Cordless being used on Instagram and I was intrigued. We’ve always worked with angles but when we saw how Clamex fittings worked, bisecting the angles, it was a real eye-opener. We realised we could design highly complex pieces from our CAD program and then put everything together in the workshop like a jigsaw puzzle without glue, disassemble it, then reassemble it on site just as quickly without damaging anything. For us it was a gamechanger: exactly what we had been looking for.”

Richard called Lamello’s Shaye Chatfield for a demonstration. “Instantly I was sold,” he recalls. “I could see the benefit immediately. I could imagine things we would be able to make, ways we could work. If we replaced the fixings

we were using with Clamex for our cabinets and utilised the clamping pressure of Tenso fixings to attach all our fillers we would be able to dry-fit in the workshop without having to use masking tape to hold joints together. And we could make more complex joints easily. Since then we have aligned our whole way of manufacturing to take advantage of the potential in Lamello’s fixings.

“Having such innovative fixings means we can be equally innovative in the furniture we design and make. We have been able to push boundaries in terms of what we manufacture and that’s propelled our client list. Having that self-clamping pressure has meant we have been able to incorporate some really intricate bisected compound angles into our designs – things we would never have thought to design, or even tried to approach.

There are no clamps that will clamp joints like this, so in the days before we teamed up with Lamello we’d end up strapping things and you can’t guarantee a perfect joint that way. With Clamex you can. Even the most intricate angles have self-clamping pressure. There is nothing else on the market you can do that with.”

To those who would bring up the cost element as a reason not to go down the Lamello route, Richard is adamant they haven’t explored all the advantages. “People who think investing in Lamello is not worth the cost are absolutely wrong,” he says.

“You’re not talking massive sums of money per project but what Lamello does is it streamlines your efficiency. You save time in assembly. All the marking out and lining up is taken away. All your fillers are perfectly straight with

no glue-ups. If you need to adapt things, there is flexibility beyond anything glue and clamps can offer. And there’s a massive timesaving on site – not to mention the peace of mind that comes with Lamello’s fixings.”

Since starting to work with Lamello, Richard has been a keen advocate of the Zeta P2 hand-held cutter. Every workbench in his workshop is equipped with a range of fixings and a Zeta P2 and each of the craftsmen has developed his own way of working:

“Before we started working with Lamello, we had a demonstration from Shaye. He gave us some pointers but there is no set way of working. There are different combinations and you work with what suits you. It still baffles me how one machine can change a whole cabinet shop but it has –and now Lamello has brought out a new cordless version, I can see that having a similar effect when we are working on site.

“The corded Zeta P2 has its place in the workshop environment and it’s got the constant power you need at a bench. If you are going to mass-repeat cuts, you may as well use the corded version but for anyone who works on site, the Zeta P2 Cordless is a real breath of fresh air.”

Richard had the opportunity to try the Zeta P2 Cordless during a Lamello Influencer day before it was officially launched in September 2022. “It’s well balanced, lighter in weight and sits comfortably in the hand,” he says, clearly thrilled with the new

addition to his workshop. “Being portable, it’s great for making fine adjustments. If you have a really intricately-angled shelving unit, for example, and you can only see the exact position of the shelf when the cabinet is in place, that’s where the cordless really comes into its own. Because you can rotate the battery – something you can’t do on the corded version – if the cabinet diminishes to a point you can get a lot tighter into the angle.

“The cordless does everything that the Zeta P2 does. You can cut all the different P14 fixings, the Divario fixings, Clamex and

Tenso. The body, the head and the guides are the same as the Zeta but it’s balanced in such a way that it feels lighter and easier to use. It also feels narrower in the handle. Lamello has made it a bit more user friendly for site work but where the corded Zeta P2 is workshop based, the cordless is a good all-rounder. The battery life is good anyway but with two or three batteries on rotation you’ll never run out of power. For us it was a logical progression to go cordless for site work.

“We believe in Lamello products so much that we’ve aligned our whole business to them,” Richard

concludes. “We couldn’t produce this standard of work without Lamello. It’s for people who want to take their joinery to the next level.”

To take your cabinetry to the next level, or for more information on the Lamello range of products visit www.lamello.com

Lamello products are exclusively available in NZ from Robertson & Sinclair

Rethinking CNC’s

Start with the with the hardware then choose the machinery

For most joinery workshops, CNC investment has traditionally focused on the ideal bed size for material optimisation, and improving cutting & drilling speeds. While these factors will always be important, perhaps the area with the biggest potential saving today isn’t at the CNC - but at assembly. This from Jacks sales & marketing specialist, Simon Hornby.

Assembly is often the most labour intensive and skill dependent stage of cabinet production. With the industry facing ongoing skill shortages and pressure to increase throughput, more workshops are re-evaluating their choice of cabinet connecting hardware and how this influences the machining required upstream.

Hardware First: The Key to Faster, Simpler Assembly

Modern cabinet connectors have evolved far beyond basic dowel and screw construction. This is particularly relevant in New Zealand, where screw construction and simple mortice and tenon joints remain widely used. Although familiar and flexible, these methods:

• Add significant assembly time

• Rely heavily on skilled labour

• Often require more clamping, measuring and adjustments

• Make flat pack transport more difficult

• Introduce cumulative errors across large batches

They work — but they aren’t optimised for modern labour realities.

In contrast, today’s connector systems provide:

• Faster, more intuitive assembly

• Reliable alignment without jigs

• Tool less / semi tool less joining

• Better consistency across batches

• Ease of flat pack and onsite assembly

Selecting the right connector can significantly reduce assembly time - often more than any improvement in CNC machining speed alone.

Let Hardware Choice Guide

CNC Requirements

Once a workshop chooses a connector system built for efficient assembly, the next step is ensuring the machining process supports it.

Many modern connectors require:

• Edge drilling

• Shallow face routing

• Accuracy so connectors align effortlessly

A nesting CNC remains ideal for optimising sheet usage and cutting shapes. However, drilling is slow and edge operations aren’t practical. This is why some workshops pair their nesting CNC with additional edge drilling & routing capability - through aggregates, drilling centres, or multi face 6-sided CNC machines.

The aim is not to replace nesting, but to ensure the machine mix supports the chosen hardware system without compromising throughput.

The Payoff: Faster Assembly with Less Skill Pressure

When the machining aligns with the chosen hardware system, assembly becomes:

• Faster and more consistent

• Easier for less experienced staff

• Less prone to rework and alignment issues

• More predictable in scheduling

Most importantly, it reduces dependence on skilled assemblers

- a significant benefit in an expensive labour market. In many cases, switching from screw construction or traditional mortice and tenon assembly to a modern connector system (properly machined) results in smoother workflows and fewer bottlenecks than any investment in a faster nesting CNC.

Onsite Assembly Advantages

Modern connector systems also enable new, flexible workflows:

• Large cabinets can be broken down for easier delivery

• Installers can assemble units reliably without advanced cabinetry skills

• Flat pack transport reduces shipping cost and damage

Some workshops overseas now cut and drill everything in house, but assemble onsite, freeing-up floor space and reducing labour costs.

Conclusion

The most effective production gains often start by rethinking the assembly strategy, not the cutting strategy. Choosing hardware that speeds up assembly and reduces labour provides a clear direction for what CNC’s are best suited - whether that’s nesting alone or adding dedicated 6-sided drilling & routing.

By starting with the desired assembly outcome and working backward, workshops can create a balanced, efficient production system that delivers more output with less labour pressure.

Assembly aids by Hettich

Engineered tools that support hardware performance right from the bench

AtHettich, every fitting is developed with a clear performance intention - and the installation process is an essential part of achieving it. That’s why our assembly aids are designed as practical, precision-focused tools that help ensure each component is installed in line with the engineering behind it. These aids support consistent positioning, correct installation forces, and long-term functional reliability, giving makers confidence that the hardware will perform exactly as designed.

Central to this approach is engineering alignment. Each assembly aid is developed to match the tolerances, performance parameters, and functional requirements built into Hettich hardware. This ensures the installation process supports the same precision we engineer into the fittings themselves.

Assembly Aids designed for precision-aligned installation

Drilling Templates & Jigs

Guided positioning for hinge cups, runners, and bore holes, helping installers follow the intended drilling pattern and maintain alignment across multiple cabinets.

Insertion Aids

Assist with controlled placement and insertion depth for hardware components that rely on exact positioning to function correctly.

Drilling & Insertion Equipment

A bench-mounted system that supports repeatable drilling accuracy and precise hardware positioning - ideal for joiners working across larger project runs or demanding material combinations.

Measuring & Marking Guides

Provide practical reference points for spacing, reveals, and offset alignment, supporting consistent visual and functional outcomes.

Runner & Drawer Mounting Supports

Stabilise components during installation to help maintain correct geometry, especially important for soft-close and synchronised runner systems.

These assembly aids are part of Hettich’s wider approach, ensuring that the engineering built into every hinge, runner, and interior system is supported from the very first step of installation. By helping maintain intended tolerances and functional parameters, they contribute to durable, reliable performance in everyday use.

For makers focused on quality, accuracy, and long-term function, Hettich’s assembly aids are practical tools designed to assist the workmanship that brings high-performing cabinetry to life.

For Sales enquiries

Our friendly customers service team 0800 438 842 | sales-nz@hettich.com or reach out to your Territory Manager for more information

Visit www.designwithhettich.co.nz

10C18 Airmix® System Xcite®+120 Spray Gun with tip, 7.5mtr hose set, 6mm suction rod, wall mounted, NO trolley

$4,980.00+GST

15C25 Airmix® System

Xcite®+120 Spray Gun with tip, 7.5mtr hose set, 16mm suction rod, wall mounted, NO trolley Pressure Ratio - 15/1

Output Pressure - 90 bar

$6,000.00+GST

30C25 Airmix® System

Xcite®+240 Spray Gun with tip, 7.5mtr hose set, 16mm suction rod, wall mounted, NO trolley Pressure Ratio - 30/1

Output Pressure - 180 bar

$7,000.00+GST

Xcite®+ Spray Gun

Xcite®+120 or 240 bar Spray Gun with tip, NO swivel, No hoses.

$1,980.00+GST

Please contact: Bruce Simmonds North Island Manager Mobile 022 155 1900 or Kim Stewart South Island Manager Mobile 022 514 7943

ECODRILL

Portable precision for blum hinges

delivers the exact layout required for Blum hinges.

Not every workshop has space for a large drilling machine, and not every job needs one. Sometimes what you need most is a compact, dependable tool you can take straight to the bench or use onsite. ECODRILL fills that gap by giving joiners and cabinetmakers a simple, portable way to drill Blum hinge cup and fixing screw positions with confidence.

Using only a standard hand drill, ECODRILL delivers the exact drilling layout required for Blum hinges without a complicated setup or dedicated machinery. The system guides the drill throughout the cut, helping the drillbit track straight and aligned. The result is neat, accurate hinge bores and clean positioning of the screw

holes, even when space is tight, or the job is being done outside the workshop.

The clamping and support features keep the fronts steady, enabling a controlled process. For many cabinetmakers, that reliability is why ECODRILL remains part of their everyday kit. It’s light to carry, quick to set up, and consistent enough to trust across different job sites and cabinet styles.

If you want precise Blum hinge drilling in a compact, affordable unit, contact your Blum Account Manager or place an order online through shop.blum.nz.

BOXFIX plus

One device for multiple box systems, thanks to BOXFIX plus

Many Kiwi workshops use multiple drawer systems to suit each project or job, and switching between LEGRABOX, MERIVOBOX, or TANDEMBOX drawers can slow the process if you need to switch out assembly devices each time. Different drilling positions, assembly steps, and jigs all add up to lost time and more room for error. BOXFIX plus simplifies this by providing one reliable assembly setup that works across all three Blum box systems.

BOXFIX plus provides a stable platform for squaring, drilling and assembling Blum drawers consistently. Instead of swapping between templates or compensating for small variations, you have a single assembly device that keeps panels aligned and drawers square. BOXFIX plus takes the pressure off by keeping an accurate output. It’s a practical way to streamline production and reduce fiddly adjustments to make sure every drawer hits the same standard.

If you’re looking to speed up your assembly workflow and make switching between drawer systems friction free, contact your Blum Account Manager or visit www.blum.com.

MINIPRESS top with EASYSTICK

For faster accuracy without the guesswork; MINIPRESS top

We all know time is the most precious resource, so when you’re switching between custom cabinets, repeat runs, and tight deadlines, every millimetre counts. That’s where Blum's MINIPRESS top drilling and insertion machine can change an entire job.

The next generation of assembly devices speeds up the complete assembly line of cabinets, from planning to assembly, and makes it easy to carry out central line and horizontal drilling. And with the preinstalled EASYSTICK, digitalisation is added to planning and assembly. Either plan the cabinet directly on your MINIPRESS machine or transfer plans and data from E-SERVICES.

EASYSTICK removes manual measuring. Enter your cabinet dimensions, and the system positions the stops automatically. No tape measure, no mathematics, no double checking. Combined with MINIPRESS top, you get consistent and accurate drilling patterns that ensure everything aligns, everything fits, and you don’t lose time correcting something that went slightly off

If you want to reduce setup time and get layout precision you can trust, contact your Blum Account Manager or email info.nz@blum.com.

www.blum.com

Paintco the team for all seasons (and places)

Spraypainting a commercial shop premises requires skill and precision, but while the shop is in full operation in a shopping mall even more so. Bob Nordgren from JOINERS Magazine caught up with Nick May who runs finishing specialists Paintco who just finished such a project in the Botany Town Centre in Auckland.

“We are able to provide for a variety of finishes be it through plastering, various decorative processes and paint be it by brush or spray. When you don’t have full control of the location as in this case – the environment in a busy shopping mall with

lots of foot traffic and no use of dehumidifiers – it creates some real world challenges to get the job done to everyone’s satisfaction” comments Nick. “This project was completed in late 2025 as part of a retail shopfitting scope, which required not only the interior decoration shopfitting scope but a high end visual spray finish in bright orange.”

To do this they had to work within strict time constraints and use a spray based coating solution that was water based, low VOC with little to no odour to ensure minimal disruption to both adjacent retailers and of course the public. Paint Co is an established painting operation with some twenty five years experience specialising is retail, commercial

and residential high end projects. They are geared to move into any location and most circumstances to meet their clientele’s needs. Being in a mall, planning, problem solving and execution was really needed on this project.

As in most jobs the key to the deal is choosing the right finish. “This project required a spray finish. We have been long term users of spraypaints from Resene: easy to use, reliable water based (and solvent) product. Application using US made Graco spray systems means we get the best finish possible. Working within tight time frames to allow the shop to open on schedule are part of the job for us.” Nick comments. “The job didn’t take long and the client was happy.”

they had to work within strict time constraints and use a spray based coating solution that was water based, low VOC with little to no odour to ensure minimal disruption to both adjacent retailers and of course the public

Paintco operate from their base in Portage Rd in the Auckland suburb of New Lynn. The business has grown to now have some eighteen staff. Over the years they have won numerous Awards for their work as well

For more information contact Nick May at Paintco Ltd, 44E Portage Rd, New Lynn, Auckland, 0800paintco (724 682) website www. paintco.co.nz

Waterborne low VOC coating system for cabinetry, joinery, shop fittings, kitchens and doors

designed for modern modern bathroom storage

Following continued demand for clean, concealed bathroom storage solutions, Hideaway Bins is pleased to introduce the new Concelo® Bathroom Bin, a purpose designed 1×13L unit engineered specifically for today’s bathroom cabinetry.

NEW SHALLOW DEPTH WASTE BIN FOR MODERN BATHROOMS

The Concelo® 1×13L Bathroom Bin is designed to fit spaces where traditional bins simply cannot.

Dealing

with waste in the bathroom has typically been an afterthought. While it’s not always obvious, bathrooms generate a surprising amount of everyday waste, yet the solutions have traditionally been limited. Small bins hung on the back of cabinet doors often lack capacity and practicality, which means they rarely do the job effectively.

As a result, many homeowners end up reverting to a bin that sits openly on the floor. These floor based solutions can quickly become an eyesore in an otherwise well designed space and often rely on flip top lids and foot pedals that are awkward to use and prone to failure over time.

The Concelo ® Bathroom Bin addresses these long standing issues by relocating waste management into the cabinetry itself, keeping bathroom floors clear and creating a more hygienic, streamlined space.

Built on the proven Concelo ® platform, the new Bathroom Bin incorporates many of the features that have made the Concelo ® system trusted across kitchens and laundries. At its core is the Clip’n’Clean tray, moulded from virgin polypropylene for maximum durability. Fully removable, fully recyclable, and rust proof, the tray eliminates the usual dirt trap between the bin frame and cabinet door, allowing the area to be wiped clean with ease. Supporting the bucket securely, it ensures simple day to day cleaning and long term protection for internal cabinetry.

The bucket also includes a liner holder. This plastic ring sits neatly on top of the bucket to hold the liner bag firmly in place, maintaining a tidy appearance and preventing the liner from slipping inside the bucket.

Performance and movement are delivered by the Häfele Matrix Premium Soft Close runner, made in Germany and rated to 35kg. The runner allows the 13L bucket to clear the cabinet fully for easy emptying, while the Aluminium Profile conceals and protects the runners, adding another layer of rust proof durability to withstand high moisture environments like bathrooms.

Installation is equally well considered. The unit features six way concealed door adjustment for precise alignment, along with

locking bolts designed to keep cabinetry aligned over time. Protective covers help shield moving parts from moisture and debris, supporting long term reliability.

With a shallow depth 350mm runner, the Concelo® Bathroom Bin has been designed to fit spaces where traditional bins simply cannot. It is ideal for bathroom vanities, wardrobes, or any environment where space is restricted, but clean integrated waste management is still essential.

The result is a bathroom bin that is easy to use, easy to clean, and built to last, a practical upgrade over conventional floor bins and a natural extension of the award winning Concelo® range.

To learn more, visit hideawaybins. co.nz or contact our national distribution partner Hafele, or regional distributors NZ Panels and Industry HQ.

Precision Meets Power

A masterclass in dust management at Haspert Joinery

In the world of high-performance joinery, the difference between a good finish and a flawless one often comes down to what you don’t see—the dust. For Haspert Joinery in Christchurch, maintaining a pristine workshop environment while running machinery required a solution that was both robust and intelligent.

We recently completed installation of the DD2150-30 system, a robust setup designed to meet the rigorous demands of a modern shop. At the heart of the system sits a highefficiency 11kW fan, providing the consistent static pressure needed to keep the air clear and the surfaces clean across multiple workstations simultaneously.

The Perfect Integrated Solution

A dust extraction system is only as good as its weakest link. This bespoke installation was engineered to provide seamless service to four critical areas:

• CNC Router: Handling high-volume chip removal without breaking a sweat.

• Edgebander: Ensuring delicate trimming processes remain free of debris.

• Tablesaw: Capturing fine particulate at the source.

• Floor Sweep: Providing a quick and easy way to maintain shop floor standards.

By unifying these machines into a single DD2150-30 extraction system, Haspert Joinery has achieved a streamlined workflow in which the machinery runs at peak capacity without the downtime associated with manual cleaning or airflow bottlenecks.

Professionalism in Practice

While the hardware is impressive, the success of any installation relies on the partnership between the client and the technicians. Despite the inevitable logistical "hiccups" that come with complex workshop retrofits, the focus remained on transparency and results.

Haspert Joinery shared their experience with the process: "Jamie's team is highly professional and well organised. They delivered an excellent

project for Haspert Joinery, with a strong focus on detail and clear, effective communication throughout the process. Although a few minor issues arose during installation, the team was always proactive, open to discussion, and quick to provide practical solutions. It was a real pleasure working with such a capable and professional team, and the overall outcome truly exceeded our expectations and felt well worth the investment."

The Bottom Line

For Christchurch joiners, the investment in high-end extraction isn't just about compliance; it’s about protecting your machinery, your staff’s health, and the quality of the final product. The DD2150-30 system at Haspert Joinery stands as a testament to what happens when local expertise meets cutting-edge technology.

We offer guaranteed competitive pricing & service that's second to none.

Guaranteed

We design and manufacture dust extraction systems right here in New

Dust Collectors

Extraction Fans

Modular Ducting Systems

Flexible Duct

Rotary Valves

Down-draught

Sanding Tables

Extraction Arms

Spray Booth & Drying Rooms

Shredders & Briquette Machines

Technical experience favours KDT in edgebander purchase

ForAnatolii Oleinikov, travel has always shaped his life. Growing up in Russia, his parents travelled frequently and often took him along, exposing him to new places and cultures from a young age. As he grew older, that early exposure developed into a clear ambition: he wanted to learn English and build a future in an English speaking country. Canada was the goal - but getting a visa proved difficult. Instead of giving up, Anatolii looked for another path. He applied for a New Zealand visa, originally thinking it would be a stepping stone to Canada.

But once he arrived, everything changed.Within months he realised New Zealand wasn’t a temporary stop - it was home. The relaxed lifestyle, friendly people and access to the outdoors suited him perfectly. Already holding an engineering degree, he fast tracked a diploma in Mechatronic Engineering and began his professional career.

His first role was in automatic doors - technically interesting but not fulfilling enough. That’s when he applied for a position at Jacks. During his interview, he was shown the wiring inside an edgebander. That single moment set his direction. The engineering complexity and automation lit a spark.

“He told us straight away he wanted the hardest machines we had,” says Service Manager Scott Villis. “So of course, we put him straight onto edgebanders.”

After nearly five years at Jacks, Anatolii gained deep experience across edgebanders, CNCs, and classical machinery. But eventually he wanted to build something of his own, and Kiwi Craft Kitchens Ltd was founded. Anatolii’s technical background gave him an immediate advantage. “I knew how to get maximum performance out of CNCs and

edgebanders - so why not apply that to my own workshop?

Choosing the best machinery for his business came easily. He had trained at the KDT factory in Guangzhou with the Jacks service team, seeing first hand the automation, consistency and build quality behind the machines.“The price to value ratio was miles ahead of anything else I’d seen,” he says. “And I knew how much support Jacks were putting behind KDT. That made a big difference.”

Anatolii purchased a KDT 2 Series CNC, edgebander, and panel saw. The CNC impressed immediately. “The accuracy and extra features at this level are unbeatable. The extraction system for example. With the air jets around the spindle, the gated ports and vacuum arm, there’s virtually no airborne dust,” he says. “Plus, I can add automatic loading and unloading later as my business grows.” More recently, he upgraded an

old German edgebander to a KDT KE 268JSA. Even with extensive experience servicing the older machine, it was taking too much time to keep running. “If I’m working on the machine, I’m not making money,” he says. The KDT solved that problem immediately. “At that price and quality, it was a no brainer.” The KE 268JSA includes features he says you wouldn’t normally find at this level: automatic beam height, pre milling, corner rounding, a gravity fed premelt glue system, and pneumatic adjustments across key units.“It’s been running for months now and we haven’t had to fine-tune the trimmers once. I’m not even doing the edgebanding anymore - I can hand it to staff and know the finish will be spot on.”

That consistency matters, because Kiwi Craft Kitchens offers a 15 year warranty on its cabinetry. The machinery must deliver without compromise - and it does.

Looking ahead, Anatolii and his wife and co founder Marina, are already planning their next step - a larger workspace and more automation.“When I was at the KDT factory, I saw the automated handling systems they build. That’s the direction I want to head - using affordable automation to stay ahead.”

From a childhood filled with travel to a journey that unexpectedly found the perfect landing place, Anatolii’s path has been anything but linear. Standing inside Kiwi Craft Kitchens today, growing and innovating - it’s clear he’s arrived exactly where he was meant to be.

THAT FIT WHAT YOU DO QUALIFICATIONS

WORK SMARTER

TRAIN AN APPRENTICE

ALREADY HAVE THE EXPERIENCE?

GROW YOUR BUSINESS THROUGH TRAINING

Have your team work smarter, learn up-to-date skills.

Help them learn the skills and become qualified.

Get skills recognised with a formal qualification.

Training an apprentice is an investment in your business and the industry.

Wellington joinery workshop upgrades to smart joinery dust extraction system

When you've spent over 30 years perfecting your craft, you know exactly what your workshop needs. That's precisely the approach David Ladd of Ladd Joinery took when installing his new joinery dust extraction system at his Tawa workshop—and the results speak for themselves.

David, a Certified Master Joiner and owner of one of Wellington's most respected custom joinery businesses, opted for Egmont Air's supply-only solution. With his mechanical expertise and hands-on approach, he installed the complete system himself— saving money while achieving professional-grade dust control.

A Wellington Workshop Built on Craftsmanship

Ladd Joinery has built a strong reputation across the Wellington region, Hutt Valley, and Kāpiti Coast. From their workshop in Tawa, David and his team manufacture custom kitchens, laundries, bespoke cabinetry, and commercial fit-outs—all crafted with the attention to detail that comes from three decades of experience.

As a member of the Master Joiners Association and the National Kitchen & Bathroom Association, David maintains the highest industry standards. That same commitment to quality extends to his workshop environment, where effective dust extraction protects both his team and the precision machinery that produces Ladd Joinery's renowned work.

Smart Technology for Efficient Joinery Dust Extraction

The system Egmont Air supplied includes eco-power technology with a variable speed drive (VSD) and pressure transducer setup. This intelligent combination automatically adjusts fan speed based on real-time ductwork pressure—when outlets are closed, the system detects the change and slows down accordingly.

The energy savings are significant.

A small reduction in airflow—say 20% of outlets closed—can deliver power savings of up to 50%. For busy joinery workshops running extraction systems throughout the working day, those savings add up quickly.

Key system features:

• Variable speed drive with pressure transducer for automatic speed control

• Eco-power technology to optimise suction and reduce running costs

• Comprehensive setup documentation for selfinstallation

• Plastic bag collection with future upgrade path to bin collection

The DIY Installation Approach

David is no stranger to hands-on projects—when he's not crafting custom kitchens, you'll find him rebuilding a chopped Ford coupe. So when Egmont Air offered a supply-only option with comprehensive documentation, he was keen to tackle the installation himself.

"I'd recommend self-installation to anyone who's mechanically minded and wants to save some money," says David. "If you can make the time, it's well worth doing."

The dust currently collects in plastic bags, though David is already looking ahead to upgrading to a bin collection method—a straightforward enhancement that can be added when convenient.

For workshop owners considering the same approach, selfinstallation works well if you want to save money, have mechanical aptitude, and can dedicate the time to do it properly. Egmont Air's technical support is always available if questions arise during the process.

Frequently

Asked Questions

What is a variable speed drive in dust extraction?

A variable speed drive (VSD) controls the extraction fan motor speed based on system demand. When fewer outlets are in use, the VSD automatically reduces fan speed, maintaining correct suction while significantly lowering energy consumption. This technology can reduce power costs by up to 50% compared to fixed-speed systems.

How does a pressure transducer work in dust extraction?

The pressure transducer measures live suction pressure in the ductwork. When outlets are closed off, ductwork pressure increases momentarily. The transducer detects this change and signals the

VSD to slow the fan, maintaining optimal suction at the remaining open outlets while reducing energy use.

What are the benefits of eco-power dust extraction for joinery workshops?

Eco-power dust extraction systems offer several advantages for joinery workshops: lower electricity bills through intelligent speed control, consistent suction at active outlets regardless of how many are in use, reduced wear on system components from gentler operation, and quieter workshop conditions when running at reduced speeds.

Ready to Upgrade Your Workshop's Dust Extraction?

Whether you're looking for a supply-only system for selfinstallation or a complete turnkey solution, Egmont Air can design a joinery dust extraction system that fits your workshop and your budget.

Get in touch today to discuss your requirements on 0800 781 200 or sales@egmontair.co.nz.

Visit www.egmontair.co.nz for more information.

SAICOS now available from Seearco Industrial Abrasives

Seearco is proud to announce that we are now the New Zealand stockist of the SAICOS range of premium timber finishing products. This partnership reflects our ongoing commitment to supplying professional tradespeople, manufacturers, and finishing specialists with products that deliver consistent, high-quality results.

SAICOS is a German manufacturer with a long-standing reputation for producing advanced wood coatings based on natural oils and waxes. Designed for both performance and sustainability, the SAICOS range offers outstanding durability, ease of application, and a natural finish that enhances the character of timber rather than masking it. From flooring and furniture to joinery, benchtops, and interior timber surfaces, SAICOS products are trusted by professionals worldwide.

A key strength of the SAICOS system is its practicality on the job. Products are engineered for efficient application, excellent coverage rates, and straight forward maintenance and repair. Many finishes can be spot repaired without sanding back entire surfaces, saving time and reducing downtime for both applicators and end users. In addition, SAICOS formulations are low odour, low VOC, and compliant with European safety and environmental standards, making them suitable for residential, commercial, and food-contact environments.

Seearco Industrial Abrasives has supplied the New Zealand market for almost 4 decades, supporting customers across woodworking, manufacturing, flooring, metal fabrication, decorative, and industrial finishing. While abrasives remain our core, we have increasingly focused on providing complete surface preparation and finishing solutions. The addition of SAICOS aligns perfectly with this approach, complementing our extensive range of abrasives and surface preparation products.

By bringing SAICOS into our portfolio, we aim to offer customers not just premium products, but also local stock availability, technical support, and practical advice backed by realworld experience. Whether you are a flooring contractor, furniture maker, joiner, or specialist finisher, SAICOS delivers a professional-grade solution—and Seearco is proud to support it.

For more information on the SAICOS range or to discuss the right system for your application, contact the Seearco team.

THE BURNS & FERRALL EVOLUTION

Twelve months on from the merger of Burns & Ferrall and Reward Hospitality New Zealand into Southern Hospitality, the business is entering 2026 with strong momentum and a clear focus on growth. The integration has brought together people, expertise, and infrastructure, creating a stronger platform to support customers nationwide.

As part of this ongoing investment, Southern Hospitality commissioned a new laser cutter, laser welder, and CNC machine in January 2026. This latest addition significantly expands the company’s stainless steel fabrication capability, delivering greater design flexibility, enhanced precision, and improved production efficiency—ensuring customers continue to benefit from high-quality, locally fabricated solutions.

The trusted Burns Ferrall brand of commercial and residential stainless steel products remain the same with the addition of two stainless steel fabrication plants. One located in Christchurch the other in Auckland enabling us to offer a true national service to our customers.

Zomodo: residential stainless steel and composite luxury sink ranges and tapware.

Chambord: porcelain sink collection.

Elleci: granite sink collection.

Britex: washroom and sanitary solutions.

T & S: commercial tapware range.

A Simplified Experience

Credit applications, invoices and purchase orders will now be streamlined under the Southern Hospitality brand for smoother transactions.

One-Stop-Shop

Our combined expertise in stainless steel products, residential sinks, taps, fabrication and commercial washroom solutions is now under one roof.

Enhanced Service

Our dedicated team remains committed to providing exceptional support every step of the way.

Luxury Residential & Commercial Stainless Steel

Burns & Ferrall have been the industry champions for residential & commercial stainless steel for over 78 years.

We can provide the expertise in residential household stainless steel benching.

Our flexibility starts with the finish that best suits your projects. Each finish offers a unique benefit that will enhance the aesthetic and provide a functional surface specific for your project.

Both the fascia and upstand profiles can be tailored to suit. The anti-spill will capture liquids and can be added to most stainless steel bench designs.

We offer a wide selection of stainless steel, composite and porcelain sinks to suit all applications. This includes single and double sinks with drainers.

Creating curves? We’ve got you covered!

Welove curves as much as the person around the corner (someone had to say it!). But, let’s be real - we know how challenging they can be for cabinetmakers. And so, we set out to make curves easier. That’s why we released our Optidoor FlexiPanel a few years ago – the first of its kind in New Zealand, flexible for curves – and a popular solution!

What sets them apart?

• Our FlexiPanel profiles are the same as our Optidoor & Opticoat linear door profiles, so you can order doors & FlexiPanel in matching profiles.

• Optidoor FlexiPanel is made with HDF (not MDF), and is painstakingly sanded prior to shipping to ensure the best results. HDF means the fibres are smaller and more dense, resulting in less sanding, and it will be easier to lacquer.

• Our profiles are fully customisable – want to increase the flat batten size? Reduce the width of the scallop? Our advanced ordering system gives you full control over your profiles!

• Our profiles are variable width, meaning the profile automatically adjusts to fit perfectly to the size of the panel every time, to avoid ugly flat bits. Each panel is custom made for your order.

Because, we believe that the small details matter.

And now, your FlexiPanel option just got even better with Opticoat, our thermoform product, made using the latest in automated coating technologies from Europe.

Picture this: You’re crafting a curved island. You’ve got a tight time frame so want to use a pre-finished material instead of lacquering a curve. Opticoat FlexiPanel is available in 9 customisable profiles, with a short lead time of only 6 days.

And then you have some options:

• It can either be supplied as a fully flexible panel (approx. 5-7mm thick, depending on the profile)

• Or, we can manufacture the panel with a 100mm return on the edge, and just a small section of the panel flexible, so that you can wrap the panel around the curve and fit it along the ‘finished end’ of the island, with the 100mm wrap creating a tidy finished end. No need for butting panels up to each other. No tacky joins. Just a perfect curve with a finished, wrapped end panel, all in one. Simple!

Simply build your island base with a curve shape. Cover the curved section with thin-line or flexi-ply to create a solid base to glue the FlexiPanel to when it arrives. When the FlexiPanel arrives, attach using PVA (do not use solvent-based glues for this!).

Normally we recommend a minimum radius of 200mm, but some of the profiles are suitable for tighter curves. Contact us & we can guide you through the process!

NKBA Executive Officer

Rachael Kwok

A designer on the rise

Kitchen design student Angie Edgar didn't see the 2024 NKBA BCITO Most Promising Student Award coming.

“I honestly thought they had the wrong person,” she says. “It was completely unexpected.” What followed became a turning point. “It was humbling. But more than anything, it gave me courage. It made me realise others could see my ability. It was a wonderful experience.”

Angie’s connection to joinery runs deep. Her father was a cabinet maker, and she grew up running around the factory environment before working in the family business. However, a showroom role eventually led her further into the industry. “I saw a job advertised, got into it, and absolutely loved it. That was 15 years ago. I started in the showroom working alongside account managers and realised there was a real career path here.”

Now working full time as a kitchen designer at Pacific Coast Kitchens, Angie has spent the past two years completing the New Zealand Diploma in Kitchen Design while balancing full-time work. “It’s been a great journey. Studying while working full time is no small thing, so finishing feels like a genuine accomplishment.”

For Angie, the value of the diploma has been practical and directly applicable to the trade. “The diploma has given me a strong technical foundation, and study definitely changes how you think. You start considering proportions, how elements work together, and most importantly how the end user will experience the space.”

Angie also sees study as a smart move for longterm career sustainability. “I’ve just turned 50, and design can be a fantastic pathway outside of the physical demands of the trade. The diploma is realistic and worthwhile, and it genuinely opens doors.”

In fact, she credits her studies with helping secure her current role. “It gave my employer confidence that I had the required knowledge and skills. It showed I had invested in understanding the technical side of the profession.”

Her advice to joiners considering study is straightforward. “Go for it. It opens up a whole world of opportunity and gives you another level of understanding. Whether that’s moving into design, strengthening your current role, or eventually running your own business, the value is huge.”

With her final diploma assignment now completed, Angie is already looking ahead. “My goals include competition work. In fact, entering the NKBA Excellence in Design Awards is definitely next on the list!”

The New Zealand Diploma in Kitchen Design is delivered by BCITO with support from NKBA experts. Combining block courses and on-the-job training, the diploma gives designers the knowledge and skills they need to create functional, beautiful kitchens.

Not quite ready to commit to the diploma? NKBA also offers a 2-day introductory workshop, the perfect taster for those considering a move into the world of kitchen design.

For more information, visit https://nkba.org.nz/education/

80% lower CO2 footprint

igus switches to recycled material for energy chain series E2.1

Following the successful development of the world's first energy chain made from recycled plastic, motion plastics specialist igus is taking the next step: the company is converting the entire catalogue range of its standard energy chain series E2.1 to the new recycled material igumid CG LW.

The European Union wants to establish a circular and climateneutral economy by 2050 at the latest. Instead of producing waste, a functioning circular economy relies on the "cradleto-cradle" concept. Consumables are returned to the natural and technical cycle so as to conserve valuable resources and raw materials. With the E2.1 energy chain series, completely converted to recycled material, igus shows that this is no longer a dream. The company is taking this step after introducing the first energy chain made from recycled material in 2022. The energy chain series is now manufactured from the recycled material igumid CG LW. It consists of post-consumer recyclate, e.g. old fishing nets, and discarded energy chains, which are recycled and processed into recyclate as part of the in-house "Chainge" programme.

(Source:

More sustainability without added costs or loss of quality

The energy chains made from the sustainable material not only have mechanical specifications that are comparable to those of standard chains, but are also available at the same price as the previous E2.1 series. Even in terms of wear behaviour, stability and continuous flexing cycles, the energy chains offer the same quality. The series is characterised by a long service life, particularly quiet operation and easy filling and installation.

"With this recycled chain series, we are enabling customers to make a contribution to the circular

economy for plastics together with us," says Jörg Ottersbach, Head of Business Unit e-chains at igus. "By switching to igumid CG LW, we are demonstrating that circular economy and costeffectiveness are by no means mutually exclusive."

80% lower CO2 footprint

By opting for the E2.1 series, customers are making an important contribution to the sustainable production of the future. Compared to the standard material, the recycled material has an 80% lower CO2 footprint. igus itself is also driving forward

its sustainability measures with the new products. The company is focussing on measures in all areas (Scopes 1 to 3), from using process heat and green electricity to adding more e-charging stations to modernising buildings.

Around 170t collected

As part of the "Chainge" programme, igus has been taking back end-of-life energy chains from all manufacturers since 2019. In 2022, an online platform was added to the recycling initiative, through which customers can also recycle other components made of technical plastics while purchasing processed material in the form of regrind and regranulate. In addition to taking back old energy chains, igus also takes back old material as part of assembly orders. Around 170t of plastic have already been recycled via the "Chainge" platform.

For its recycling programme, igus was awarded the Rhineland Business Prize in the sustainability category (2022) and took first place in the "Going Circular" recycling competition organised by the Cologne Chamber of Industry and Commerce (2023)

Effortless Lifting

Precision Holding

Ergonomic Vacuum Lifting and Secure Vacuum Clamping

Treotham Automation supplies the full range of Schmalz Vacuum Lifting devices, customizable and suitable for standard weights up to 750kg. Schmalz clamping solutions are used for a wide range of machining and assembly tasks. With vacuum power, components made from wood, metal, glass or plastic are fixed securely and without distortion.

Steering a

course

Ian Featherstone

Ian Featherstone is a cabinetmaker, business advisor, mentor and leadership coach.

Glass Half Full provides tailored solutions to lift performance and drive growth. Ian specialises in the joinery & cabinetry sector and other construction related industries. For more information or to find out how you can move your team forward, please visit www. glasshalffull.co.nz

Margin Recovery getting back to profitable ground

For many joinery businesses, 2025 has reinforced a harsh reality: being busy doesn't equal being profitable. Many firms’gross margins have dropped 5-10% or more. With tight margins and competitive pricing pressure, now is the time to take control of your profitability by understanding exactly where you make money— and where you don't.

Margin recovery isn't about working harder or taking on more work. It's about working smarter, understanding your true costs, and making deliberate decisions that protect and improve your bottom line. Stopping the margin leaking out.

Understanding the Value You Add, Not Just Price

Too many joinery businesses fall into the trap of competing on price alone. The result? A race to the bottom that erodes margins and devalues the craftsmanship and expertise you bring to every project. Start by listing everything you provide that creates value for your clients:

• Technical design expertise, appropriate specifications and shop drawings. Ensuring a fit for purpose design, that will last the test of time and fit the clients budget.

• Project management and coordination, managing timeline risk for your clients.

• Quality craftsmanship and attention to detail

• Problem-solving on site.

• Reliable delivery and installation.

• Warranty and after-sales service.

• Years of experience and reputation.

These are some of the elements that differentiate you from competitors who simply quote a number. When you understand and articulate this value clearly, you can justify appropriate pricing and protect your margins. Clients don't just buy kitchen cabinets or joinery—they buy peace of mind, quality, and your ability to deliver on complex projects. The products you produce are largely the same as your competitors.

Separate Out Your Costs to See Where You Make Margin

One of the most common mistakes in joinery businesses is treating all costs the same. To truly understand your profitability, you need to break down your pricing structure into clear components: labour, factory materials, outworks (such as stone or glass), and contractors (like installers, electricians or plumbers).

Each of these categories has different margin characteristics. For example; your labour might carry a 100% margin, while your materials might only carry 30-

50%, and outworks perhaps just 15-25%. If you don't separate these out in your job costings, you won't know which parts of your work are profitable. Create a pricing template that clearly shows:

• Direct labour hours and rate (including margin)

• Factory materials with your markup

• Outworks and subcontractors with their respective margins

• Your overhead recovery ( can be built into the labour rate)

• Total margin and margin per hour

This transparency doesn't just help you price accurately—it helps you identify where margin leakage occurs. You might discover you're making good margin on manufacturing but losing it on installation, or that your material markups aren't covering the hidden costs of procurement, storage, and handling.

Work Out the Margin Per Hour You Need

Here's where many businesses trip up: they price jobs based on what feels right or what the market will bear, without knowing what they actually need to earn per productive hour.

Start with your annual budget. Calculate your total overheads, desired profit, and divide this by the productive (chargeable) hours available (typically around 1,650-1,700 hours per person after

For example, if your total overheads are $400,000, you want $100,000 profit, and you have 8,000 productive hours available, you need $62.50 per hour in margin just to break even and hit your profit target. Once you know this number, check every quote against it. Are you achieving it? If not, either your pricing is wrong, or you need to reduce overheads or improve efficiency. You will find that you may need different hourly rates for different types of work to ensure every job contributes its fair share to covering overheads and generating profit.

Use Spare Labour Wisely or It Will Become Costly

 holidays, training, and downtime). This gives you the margin per hour you must achieve across all jobs to be profitable.

Downtime

When work is quiet, many businesses make the mistake of keeping staff on the tools with no productive work. This idle time expands the time on jobs and quietly destroys your margin per hour and turns potential profit into loss.

If you have spare labour capacity, redirect that energy into business improvement projects: refining your quoting system, improving workshop efficiency, developing new client relationships, or training staff in new skills and practising. Alternatively, encourage staff to take annual leave during quiet periods to reduce liability and maintain morale.

Whatever you do, don't let idle capacity simply burn cash. Labour is your most expensive resource— protect it by keeping it productive or removing it from the cost base temporarily.

Final Thought

Margin recovery starts with clarity. Know your value, understand your costs, work out your required margin per hour, and manage your capacity intelligently. Back cost every job and look for trends. These aren't complex concepts, but they require discipline and honesty about where your business really stands.

In tough economic times, the businesses that survive and thrive are those that control their margins rather than letting the market dictate them.

STATE OF THE INDUSTRY

AUCKLAND/NORTHLAND

It sounds like the beginning of 2026 has been different for companies, with some experiencing a quieter period and others still being busy. But overall, the volume of work is still way down on where it needs to be. As a result, we have seen a couple of companies close down at the end of last year and the beginning of this year. The quoting of larger projects is still down, and the long lead time between quoting and manufacturing indicates 2026 will be much the same as 2025.

The industry continues to experience rising costs in raw materials and hardware. In particular, Western Red Cedar has increased by 26.5%, putting significant pressure on manufacturers. As a result, many window and door manufacturers are being forced to raise their prices.

Absolutely, prioritizing health and safety is crucial in any business activity. Last year and the beginning of this, members have had Work Safe visits; to emphasize the importance of dust control, machinery lock out procedures and Health & Safety communication with employees.

Auckland’s Annual Fishing trip is set down for the end of February in the Hauraki Gulf which is renowned for its rich marine life and beautiful scenery. The turnout of members and associates is down on last year, which is a sign of the times, so we only have one boat this year instead of the usual two. However, I am still eagerly anticipating the adventure and the opportunity to catch some great fish and strengthen the sense of unity within our organization.

In mid-March, we proudly celebrated alongside BCITO at a graduation ceremony honouring our apprentices who successfully completed their Joinery Qualification.

Looking forward to our next Master Joiners Meeting, late February hosted by Biesse and catching up with current news and meeting our guest speaker from Clarity Insurance. Along with celebrating the lucky prize winners from our fishing trip. - Rob Pickup

CANTERBURY

With the pressure easing and the Christmas rush behind us, we’re saying goodbye to 2025! I hope you wrapped up your projects successfully, celebrated with a great Christmas function alongside your team, and most importantly, enjoyed some well-

earned time off with the people who matter most, your friends and family of course!!

We are off to a great start this year for most of the Canterbury Master Joiners having a very positive attitude to the up-and-coming workloads around Canterbury. It’s an excellent way to start the season off … especially after paying the tax man his share in January.

Material supply has been a bit hit and miss so do make sure you get your orders in to avoid the disappointment for your client. What we don’t want is another Covid rush were everyone buys up everything and there’s no stock left for others, that makes it very hard to turn profit when you can’t get supplies as I’m sure you are all aware of.

The start of the year has seen WorkSafe out and about doing the rounds in Christchurch with quite a number of factories being visited, they have been looking at high risk areas, dust control and the use of vacuums in the factories, management of hazardous substances and making sure staff understand the chemicals in their building, what they do and how to treat if harmed; along with safe use of machinery and guarding. WorkSafe are there to help and assist you as a business owner, please keep that in mind, work with them and not against them please.

Following recent discussions with Ara, it’s clear that apprentice sign-ups are currently very low. This is likely linked to lighter workloads throughout 2025, which would have impacted cash flow across the industry. As a result, more qualified personnel may be seeking employment, potentially due to companies reducing staff numbers because of insufficient confirmed work.

The conference last year saw an excellent display of workmanship by apprentices, these young (or not so young people) are the next generation of joiners coming through, which keeps our trade alive, the skill you pass onto them are the back bone of our trade and craftsmanship, these skills have been passed down from generation to generation, through your hands indeed. Please if you are in the market for a new staff member, taking on an apprentice could be your answer as you can teach them from the ground up.

Canterbury Master Joiners’ local area awards are coming up in the month of April to align with the NZ Master

Reports from Branch Presidents February 2026

Joiners conference in May in the beautiful surroundings of Millbrook Resort in Queenstown. Please ensure you get your award submissions in as the deadline is not too far away. Remember, if you’re not in it, you can’t win!! We are looking to change the format of the evening meetings so watch this space and we will let you know how it goes, if you haven’t been along before then please come on down and enjoy in the fun, excitement, entertainment and mix and mingle with fellow members alike.

I am proud to announce the social calendar has its first event, like a back to work Xmas party really, first one up this year its bowling at the Papanui Bowls Club, BBB: Beers, Bowls and BBQ on the 26th of February. Thanks to the organisers of the event, we are really look forward to a great evening with members and their partners showing off their skills on the green. Highlight of course will be NZ Master Joiners president Nathan Moore dressing up in his tight whites, sweat bands and tartan cheese cutter!! Anyway, till next time, welcome back and let’s hope for a great 2026 for us all. - Graham Woodham

CENTRAL

Welcome to 2026 from Central Master Joiners. Hopefully everyone managed to rest and reset over the Christmas break. A number of businesses extended their shutdown to three or even four weeks — not necessarily by choice, but in response to lighterthan-usual workloads heading into the new year.

After catching up with a few reps (always a reliable source of insight — and the occasional piece of industry gossip … we won’t name names), the consensus is that workload across the region is anything but consistent. Some workshops are flat out, while others are noticeably quiet. At the moment, it really is a mixed bag. Like other regions, we haven’t come through this prolonged downturn untouched. Unfortunately, we’ve seen another business close its doors. That’s never easy to report and serves as a reminder that the continued softness in the housing sector is still having a real impact locally.

On the upside, there are several significant commercial and infrastructure projects providing some backbone to the region. The Palmerston North Airport project

continues to move forward (their Facebook page has regular updates for those keeping an eye on progress).

PNCC has a number of community facility projects underway, with more signalled in the pipeline.

Healthcare facilities and retirement developments continue to expand in Palmerston North, with a couple currently under construction and several more expected to break ground soon. As previously mentioned, Woodville is seeing a steady level of development — although I’m reliably informed it’s a foggy spot?! Whanganui is progressing with a new courthouse development, and down in Horowhenua the Ōtaki to north of Levin highway project is very visible — hard to miss if you’ve driven through recently. These larger projects are helping keep parts of the sector ticking over and providing some longer-term confidence.

There is also the proposed introduction of a Battery-Electric rail service between Palmerston North and Wellington (projected rollout around 2029), with multiple daily return services planned. Improved connectivity up and down the coast has the potential to make regional living even more attractive for those working in the capital, supporting future growth — and eventually, more building activity. That’s the optimistic lens. In the short term, however, things remain reasonably sluggish. There’s plenty of enquiry floating around — plenty of conversations, pricing requests, and “we’re just working through funding” discussions — but what the industry really needs is for those enquiries to turn into signed contracts and confirmed start dates. Until then, pressure remains.

As always, resilience and adaptability continue to be the order of the day. Let’s hope 2026 brings a bit more certainty. - Vaughn Tongs

HAWKES BAY-POVERTY BAY

Overview - Our first branch meeting for the year is scheduled for 19 March. In preparation, we have spoken with a few local joiners, builders, and key suppliers to gain a broad understanding of current conditions across the Hawke’s Bay and Poverty Bay regions.

Current Sentiment - Overall sentiment is cautious but stable. There remains an underlying level of uncertainty around the wider economic environment

and how this may influence demand beyond the first quarter of the year. While activity levels are lower than previous years, the industry is not experiencing a sharp downturn, with many businesses adjusting to more moderate and shorter-term workflows.

Workload - Workloads across joinery and related building trades are mixed but generally steady, albeit at a more moderate pace than in previous years. Much of the current work is driven by renovations, insurance-related repairs, and replacement joinery, with fewer speculative new builds. Forward pipelines tend to be shorter, and clients are taking longer to commit to projects.

Market Conditions - There are encouraging signs through increased customer enquiries, design engagement, and quotation activity, particularly in the renovation and kitchen markets. However, conversion rates are more competitive, with clients seeking multiple quotes and closely managing budgets. Value, durability, and practical design continue to be key decision drivers.

Materials & Supply Chain - Material and hardware availability is generally good, with supply chains having largely stabilised. Lead times are more predictable than in recent years. New supplier pricing is expected to roll out over the coming months, and while pricing has levelled, costs remain elevated. Occasional delays still occur with specialised items and appliances, requiring careful coordination.

Outlook - The region is experiencing a quieter start to the year, but with healthy levels of enquiry and quoting activity. Work continues to be a mix of renovations, insurancerelated projects, and selective new builds. Several new subdivisions are progressing across the region, though some are experiencing delays that are pushing timelines out. Looking ahead, confidence remains measured, with resilience across well-established local businesses and cautious optimism as the year develops. - Brent Marshall

OTAGO-SOUTHLAND

Hello everyone, welcome back to 2026. I hope you all managed to get a decent break over the holidays, switch off where possible, and spend some quality time with family and friends. It was really nice to bump into a few familiar industry faces around Central Otago over the break too — even better getting to meet partners and families and have a proper catch up outside of work boots and hi-vis.

The year has started strongly across the Otago–Southland region, which is encouraging and hopefully a sign of a solid year ahead. There’s a definite

sense of momentum in workshops and on sites, and it’s great to hear positive chatter filtering through already.

We’ve also seen a bit of change on the supplier front, with some sales reps moving on. While it’s always a shift when familiar faces leave, we’re looking forward to meeting and building relationships with the new reps coming into our region and seeing what they bring to the table.

Looking ahead, our first regional meeting for the year is on 14 April in Dunedin, so please lock that date into your calendars now. A video link will also be available for those who can’t make it in person.

Before that, March is Members Month, and we’ve got a couple of great things happening. On 12 March, we’ll be holding a factory tour and networking session in Cromwell — a good chance to connect, share stories, and see what others are up to, so make sure that’s marked in your diary as well.

Our Apprentice Day Out is coming up on 20 March in Kingston, open to any joinery apprentice in our region. You should have already received further details, but it’s worth reiterating just how valuable days like this are. They’re a fantastic way to encourage our up-and-coming joiners to engage with the wider industry, build connections, and feel a real sense of belonging. Retaining numbers in our trade continues to be a focus, and getting apprentices along to initiatives like this genuinely makes a difference. The feedback from last year was overwhelmingly positive, and this year’s location and activity were actually chosen by the apprentices themselves — so let’s get in behind them and show our support by making sure they’re there.

If you have ideas for things you’d like to see happen in 2026 — either for our region or for Master Joiners as a whole — please don’t hesitate to reach out. We really do love hearing from you, and good ideas often start with a simple conversation.

A reminder too not to forget Conference, which is in Queenstown this year — nice and close for those of us down this end of the country. Registrations are now open, with capped numbers, and the shorter format means less time away from work while still delivering just as much value and education. Awards entries are also now open, so it’s time to get those photos taken and submissions underway.

That’s all from me for now. I’m really looking forward to the year ahead and catching up with many of you over the coming months. Warm regards, - Kate Rule-Munro

TARANAKI

With Christmas just a distant memory now, the weather has turned on the sun, and we are all enjoying warmer temperatures and longer days, with the occasional rain and windstorm in between the fine days.

The year has started better with most coming back to enough work, with inquiries steady as well. There seems to be a bit of renovation work around, with people upgrading what they already have. New builds are still slow, but there are people out there building. Looking around New Plymouth, there are a couple of developers building duplex for inner city living. Kainga Ora are building about 30 new builds in town at present, so that might be of benefit to those selected to work for them.

Staffing levels seem to be fine at movement with the odd member looking for staff. We have again lost couple of members to retirement, finally deciding to hang up the tool belts.

Generally, the commercial sector seems to be steady with several large projects in Taranaki about to start. The new hospital wing is probably the biggest due to open in a couple of months, they are on the last finishing touches.

I think we are in for more challenging times this year, and its election year as well. Let’s hope interest rates don’t move up too much, because what ever political party gets in, we need them to stimulate the economy to loosen peoples wallets and get them spending again.

Have fun and be safe out there enjoy the hot days! - Bryan Frank

WAITAKI

Waitaki master joiners are back to work after a deserved break. Forward work for everyone varies with some being very busy and some with a slower start to the year.

Generally the felling is that things are improving, with increased inquiry and new build numbers up. Some are still looking for more staff but getting the right qualified person for certain roles is proving to be a challenge. One local firm closed the doors at Christmas due to staffing problems. Material supplies generally not a problem but price increases over most products are happening. Taking on apprentices has been a topic discussed but all wanting to see how first half of the year goes before committing to this.

Let’s hope that 2026 is a good year for everyone. Regards - Mark Mitchell

WELLINGTON

Here we are again for another year crafting beautiful joinery throughout our Wellington region. Members reports are split, with some members reporting strong, monthsahead workloads, while others are experiencing a slow, anxious start to the year. There is a general sense of cautious optimism. While not fully out of the “doldrums”, there is a consensus that the industry is close to turning a corner. 2026 will still likely have some challenges for many of us, especially with the elections later in the year. Wellington always faces challenges around any election, and I think this year will be no different.

I heard recently from a Wellington architect that the NZ Institute of Architects has reported to its members that Wellington has gone through the worst slump than ever before over the last 80 years. If this is true, it certainly puts things into perspective for many of our members who have found recent times tough. Let’s hope this improves quickly.

Our suppliers seem to be well stocked, and I hear no reports of supply issues. There are some cool products being launched this year by a few of our suppliers, so we look forward to seeing these becoming available to us.

Staffing remains as it has been for some time. Not a lot of new employees available in the market, so any opportunities for new staff likely results in another member losing those employees. We have had a few joinery companies close in Wellington over the past 6 months, so this has resulted in some opportunities for those that remain busy to pick up some new employees. It’s never nice seeing a business close, but I am always happy when I hear that the people laid off have found jobs quickly. - Stephen Fairbrass

AUCKLAND

Advanced Timber Joinery

PO Box 132, Silverdale, 217 Spur Road, Silverdale, Ph 09 426 9785, contact Wade Saunderson. NZS4211 Affiliated.

All Timber Joinery (2017) Ltd

Unit A, 1058 Great South Road, Mt Wellington, Auckland. Ph 09 270 9605, contact Rory Johns. NZS4211 Affiliated.

Alpha Joinery Services (2010) Ltd

124D Felton Mathew Ave, St Johns, Auckland, Ph 09 578 0391, contact Juan Whippy. NZS4211 Affiliated.

Art Deco Interior Ltd

6 Grayson Avenue, Papatoetoe 2104, ph 09 218 8079, contact Sam Ju.

Auckland Joinery (2014) Ltd

2 Taylors Road, Morningside, Auckland, Ph 09 846 0346, contact Ross Webster. NZS4211 Affiliated.

Aurora Australis Interior

3/184 Mcleod Rd Te Atatu Sth, 0610. contact Amanda Yuan 021 688 901.

BML Builders Ltd

18 Shamrock Drive, Kumeu, Ph 09 412 2350, contact Kaye Butler. NZS4211 Affiliated.

Buildcraft Group

6 Ron Driver Place, East Tamaki, Auckland, 2013. ph 027 735 4646, contact Sean Soo.

Canam Joinery Ltd

196 Swanson Rd, Henderson, Auckland. Ph 09 836 0732, contact Angus Welton.

Carlielle Kitchens

138 Manukau Road, Pukekohe, Auckland 2120, Ph 09 238 5222, contact Doug McMiken.

Cedarlite Industries Ltd

4 Mahunga Dr, Mangere Bridge, Auckland, Ph 09 633 0410, contact John Harrison. NZS4211 Affiliated.

Continental Stairs Ltd

32 Waipareira Ave, Henderson, Auckland, ph 09 836 1935, contact John or Anthony van Erp.

Counties Joinery

36 Sedgebrook Rd, Patumahoe, RD 1, Pukekohe 2678. Ph 09 236 3271, contact Roy McKerras NZS4211 Affiliated.

Craft Kitchen Plus

65E Crooks Road, East Tamaki Auckland, 2013. Ph 09 272 8266, contact Terry Diao.

Craftsman Cabinets Ltd

140 Patumahoe Rd, Pukekohe, 2678. Ph 021 225 3460, contact Jason Michie.

CT Timber Joinery Ltd

42 View Rd, Wairau Valley, Auckland, Ph 09 444 9041, contact Geoff Knight. NZS4211 Affiliated.

Cutting Edge Cabinetry Ltd

189B Manukau Rd, Pukekohe, 2120. Ph 09 238 5090, contact William Haverland.

Cutting Innovations Ltd

70 The Concourse, Henderson, Auckland 0610, Ph 09 836 9050, contact Alec Stringer

Dando Doors and Windows Ltd

62 Stoddard Rd, Mt Roskill. Ph 09 629 0222, contact Peter Facoory. NZS4211 Affiliated.

Danska Cabinetmaking Unit 5, 56 Rewarewa Rd, Raumanga, Whangarei, ph 09 438 1100, contact Aaron & Carolyn Rawson.

Dentro Limited

8 Tironui Station Rd, West Takanini, Auckland. Ph 09 297 7830, contact Leonie Hamill.

Design Timber Doors & Windows

125 Markham Rd, Ararimu Dury, Auckland, 2579 Ph 021 0868 6770, contact Sailesh Prakash. NZS4211 Affiliated.

Divine Design Ltd (T/A JDC Cabinets) 14 Alfred St, Onehunga, Auckland 2012. ph 09 622 1912, contact Julie Todd.

Euro Timber Joinery Co Ltd

34 Waipareira Ave, Henderson, Auckland, ph 09 837 1833, contact Shane Paterson. NZS4211 Affiliated.

F&R Home Improvements

79 Ellice Rd, Wairau Valley, Auckland. Ph 09 944 4962, contact Frank Ren.

Fabulous Kitchens

52 Rangi Rd, Takanini, Auckland. Ph 09 268 2299, contact Ming Feng.

Fineline Joinery Limited

4 Corban Avenue, Henderson, Auckland, Ph 09 836 2212, contact Richard Schaefer. NZS4211 Affiliated.

Geoff Locke Cabinetmaker Ltd

67 Hodge Road, R D 6, Ruatangata, Whangarei 0176, Ph 09 433 5745, contact Geoff Locke.

Grandvue Joinery

42 Gregory Road, Waitakere. Ph 09 810 9398, contact Robert Piacun. NZS4211 Affiliated.

G & J Joinery (1997) Ltd

372 West Coast Rd, Glen Eden, Auckland. Ph 09 818 5585, contact Alan Parry. NZS4211 Affiliated.

Heritage Joinery Ltd

1007 Paerata Road, Paerata, Pukekohe. Ph 09 239 2794, contact Michael Oglesby.

Hewe Architectural Cabinetry

10 Triton Drive, Albany, Auckland 0632, Ph 09 479 6504, contacts Tony Hewetson or Craig Hewetson.

Haydn & Rollett Ltd

1 Warehouse Way, Northcote, Auckland 0627. Ph 09 443 8315, contact Christopher Hartley.

Inspire Design Limited

5B Volkner Place, Rosedale, Auckland 0632, ph 022 169 9136, contact Aaron Dykstra.

Kay Joinery

- Allison 12322, support

Chief Executive - Allison Delaney, PO Box 12322, Thorndon, Wellington 6011. p: 04 471 1133, e: support@masterjoiners.co.nz, accounts@masterjoiners.co.nz

1226 Oruru Road, R D 2, Peria, Kaitaia, Ph 09 408 5547, contact Daniel Kay. NZS4211 Affiliated.

Kitchen Dynamics Limited

17 Martyn St, Waiuku, Auckland, Ph 09 235 0252, contact Colin Drummond.

Kiwi Carpentry

131 Quarry Rd, Kaitaia, Northland 0482. Ph 021 0278 9544, contact Andrew Bennie.

Legacy Joinery

34a Leonard Rd, Mt Wellington, Auckland. Ph 09 953 1465, contact Graham O”Neill. NZS4211 Affiliated.

Leslie A J & Co Ltd

6/95 Ellice Rd, Wairau Valley, Auckland. Ph 09 479 4662, contact Steve Leslie. NZS4211 Affiliated.

Mahurangi Joinery Ltd

23a Glenmore Drive, Warkworth, Auckland 0910, Ph 09 425 9849, contacts Joel and Suzannah Hemus. NZS4211 Affiliated.

Matakana Kitchens & Joinery Ltd

50 Matakana Valley Road, Matakana, Ph 09 422 7804, contact Jeffrey Smith. NZS4211 Affiliated.

McNaughton Windows and Doors 42 Frost Rd, Mt Roskill, Auckland. Ph 09 620 9059, contact Andrew Riley or Dave Cunningham. NZS4211 Affiliated.

Neo Design Ltd

96 Hillside Road, Glenfield, Auckland. Ph 09 443 4461, contact Wayne Church or Paul Burgess.

Next Level Joinery Ltd

7 Goldfield, Wairau Valley, Auckland. Ph 09 600 2726, contact Brendon Sowerby. NZS4211 Affiliated.

Nicks Timber Joinery Ltd 56 Forge Road, Silverdale, Auckland. Ph 09 426 6862, contact Ken Caldwell. NZS4211 Affiliated.

Owairoa Joinery Ltd 9 Carpenter Rd, East Tamaki, Auckland. Ph 09 273 3699, contact Nigel Walker. NZS4211 Affiliated.

Papakura Joinery Ltd 45-51 Tironui Road, Papakura North, Auckland, Ph 09 298 7145, contact Glenn Haszard. NZS4211 Affiliated.

Smith & Parker Joiners

35 Waipanga Road, Kamo, Whangarei, Ph 09 435 5415, contact Albert Smith or Simon Parker. NZS4211 Affiliated.

Southey and Knight Group Ltd 258a Roscommon Rd, Wiri, Auckland. Ph 022 455 9975, contact Ryan Southey. NZS4211 Affiliated.

Timber Joinery Solutions Ltd

1007 Tauhoa Road, R D 4, Warkworth, Auckland, Ph 09 422 5873, Contact Dave Sattler. NZS4211 Affiliated.

Total Timba Joinery

227 Archers Rd, Glenfield, North Shore. Ph 09 444 7772 contact Rob Pickup. NZS4211 Affiliated.

VSP Interiors Limited

36 Parkway Drive, Mairangi Bay Auckland, Ph 021 183 9151, contact Vishal.

Westpine Joinery Ltd

7 Binstead Rd, New Lynn, Auckland. Ph 09 827 6488, contact Bill or Donny Rawlinson. www.westpine.co.nz. NZS4211 Affiliated.

Wendekreisen Travel Ltd

Unit 1, 197 Montgomerie Road, Mangere, Auckland, Ph 03 489 6507, contact Sascha Warnken; Dieter Schuetze

Woodland Shopfitting

91 Wairau Rd, Wairau Valley, Auckland. Ph 09 222 3113, contact Angela Sneddon.

Wood Works NZ Ltd

18 Selwyn St, Onehunga, Auckland, 1061.Ph 021 150 5710, contact Serge Landry.

WAIKATO

BAY OF PLENTY

Adapt Kitchens

52a Hewletts Rd, Mt Maunganui. Ph 021 156 9960, contact Andrew Dagger.

Advance Joinery 2015 Ltd

71 Higgins Road, Hamilton, Ph 07 846 0026, contact Kris Allen.

Artisan Carpentry Ltd

747 No2 Road, R D 2, Te Puke 3182, Ph 027 344 1918, contact Charles de Lapomarede

Autocrat Joinery

Popular Cabinets Ltd (T/A Popular Kitchens), 12 Rylock Plc, Papakura Heights, Auckland, 2140, ph 09 576 6358, contact Sherry Shi.

Regal Plus Joinery Ltd

35 Commerce Street, Whangarei, Ph 09 438 2989, contact Jason Hammond.

Rockfield Woodworkers (2003) Ltd

9 Parkwood Place, East Tamaki, Manukau, Ph 09 274 4698, contacts Bryan Hancock and Nick Jones. NZS4211 Affiliated.

31 Maru Street, Mount Maunganui, Ph 07 574 8162, contact Steve O’Donohoe. NZS4211 Affiliated.

Bakers Joinery

46 Johnston Street, Waihi, contact Mike Forsyth, mob 020 4092 9555.

Cabinet Queen Waikato

29 Norrie Street, Bader, Hamilton, contact Alisha Campbell mob 021 050 0104.

Classical Doors Ltd

Cnr Chadwick Rd & Sherson St, Tauranga, Ph 07 578 4908, contact Scott Wilkins. NZS4211 Affiliated.

Clearline Ltd

65 Hull Road, Mt Maunganui, Ph 07 572 4307, contact Barry Ririnui. NZS4211 Affiliated.

CM Joinery Ltd

201 Bowman Rd, RD 9, Hamilton. Contact Craig Mackie, 022 585 6788.

Concept Kitchens & Bathrooms Ltd

73 Riverlea Rd, Hamilton, Ph 07 856 4705, contact Ross Bones.

Cromptons Joinery & Laminates

PO Box 751, Taupo. Ph 07 378 7968, contact Allan Crompton. NZS4211 Affiliated.

Customtone Kitchens

33 Progress Drive, Otorohanga, Ph 07 873 8083, contact George van Boven.

Designline Limited

21 Gateway Drive, R D 4, Whakatane, Ph 07 307 0058, contacts Hayden and Rachel Boyd.

TS Industries Ltd

t/a Fernlea Cabinetry & Joinery Unit 3, 593 Te Rapa Road, Hamilton, Ph 027 505 3480, contact Stefan Brown. NZS4211 Affiliated.

Fine Woodworking

1536 Main North Road, R D 5, Te Kuiti, Ph 07 878 6194, David Higgins. NZS4211 Affiliated.

Gartshore Group

211 Taurikura Dr, Tauriko, Tauranga. Ph 07 578 4529, contact Bill Gartshore. NZS4211 Affiliated.

Got It Made Kitchens & Cabinetry

360 Rickit Road, Te Awamutu 3800. Ph 07 871 3998, contact Cherie van der Poel or Eric Prole.

Graft Joinery Ltd

32 Raywood Cres, Taupo 3033. Ph 07 378 8340, contact Craig van Velden.

Hamilton Laminates

58 Bryant Road, Te Rapa, Hamilton, Ph 07 849 7745, contact Steve Harker.

HK Kitchens Ltd

144 Taurikura Drive, Tauriko, Tauranga, Ph 07 578 6361, contact Matt Olsen.

Hopkins Joinery

126 Taupo St, Putaruru. Ph 07 883 7951, contact Ron or Hilary. NZS4211 Affiliated.

Hostess Joinery Ltd

17 Sunshine Ave, Te Rapa, Hamilton, Ph 07 847 3099, contact Peter Clarke.

Huntly Joinery 2000 Ltd

22-26 Glasgow St, Huntly, Ph 07 902 5250, contact Simon Curran. NZS4211 Affiliated.

Innovant Cabinetry Ltd

3 Allen St, Morrinsville, Waikato 3300. Ph 07 889 6178, contact, Tracy Maxwell.

Interior Fittings Ltd

23 White St, Rotorua 3010, Ph 07 348 1041, contact Josh Anderson.

Keith Paton Joinery

15 Carters Crescent, Cambridge, ph 07 827 3249, contact Keith Paton.

King & Co Joinery Limited

1370 Arthur Porter Drive, Hamilton 3200. Ph 0210 513 786.

King Country Kitchens

49 King St, Te Kuiti, Ph 07 878 8820, contact Richard Pethybridge. NZS4211 Affiliated.

Kitchen Fx Ltd

801 Arthur Porter Dr, Burbush, Hamilton. Ph 07 849 2801, contact Mark Davies.

Lee Brothers Cabinets & Joinery

120 View Rd, Rotorua, Ph 07 348 0620, contact Paul Ingram. NZS4211 Affiliated.

LPS Cabinetry Ltd

55 Miriama St, Taumarunui 3920. Ph 027 539 4702, contact Lewis or Deborah Stewart

MGK Kitchens

2 Lake Rd, Frankton, Hamilton, Ph 07 847 4563, contact Michael Kenyon.

Montage Kitchens & Joinery

PO Box 5266, Frankton, Hamilton. Ph 07 8479 174, contact Jared Monk. NZS4211 Affiliated.

Morrinsville Industries Ltd 11-13 bank St, Morrinsville. Ph 07 889 5199, contact Murray Foster. NZS4211 Affiliated.

Native Timber Joinery Ltd

92 Bruce Berquist Drive, Te Awamutu, Ph 07 871 6188, contact Stuart Walker. NZS4211 Affiliated.

Pacific Coast Kitchens NZ Ltd

471 Omokoroa Road, R D 2, Tauranga, Ph 07 548 0606, contact Eric Thompson.

SMJ Ltd

49A Matai Street, Taupo. Ph 07 378 8049, contact Stu Martin.

Treetown Kitchens Ltd

57 Albert Street, Cambridge, Ph 07 827 7309, contact Kevin Middlemiss.

Thames Joinery (1995) Ltd 913 Queen Street, Thames, Ph 07 868 6951, contact Bruce Fulton.

The Good Joiner 18 Killegray Close. Hamilton 3210. Contact Ian Megchelse 021 056 1487.

The Kitchen Tailor 58b Herbert Rd, Queenwood, Hamilton. Contact Adam McNeil 0274 481 879.

Torrington Stairways 24 Matos Segedin Drive, Cambridge, Ph 07 827 6323, contact Brian Courtney.

Wackrow’s Joinery Ltd

Gillies St, Box 150, Cambridge. Ph 07 827 5981, contact Carl Riley or Liam Wackrow. NZS4211 Affiliated.

Waikato Benchtops Ltd Glasgow Street, Huntly, Ph 07 902 5353, contact Simon Curran.

(Master Joiners membership continued overpage)

National Associate Members

Advanced Engineering Services www.aesparts.co.nz

AGB Stone www.agbstone.co.nz

Allegion (New Zealand) Ltd www.allegion.co.nz

Architectural Hardware

Supplies www.ahs.co.nz

Astro Pine NZ Ltd www.astropine.co.nz

Austaron Surfaces www.austaronsurfaces.com

Bates Surface Solutions www.batessurfaces.co.nz

BBS Timbers www.bbstimbers.co.nz

Biesse Group New Zealand www.biessenewzealand.co.nz

Blum NZ Ltd www.blum.com

Carters www.carters.co.nz

Daiken New Zealand Ltd www.daiken-nz.com

Drake & Wrigley Ltd www.drakeandwrigley.co.nz

Enko Group Ltd www.enkogroup.com

Farnese NZ Ltd www.proformnz.com

FIT NZ www.fit-nz.co.nz

Glass Half Full www.glasshalffull.co.nz

Häfele NZ Ltd www.hafele.co.nz

Halswell Timber Co Ltd www.halswelltimber.co.nz

Harvey Norman Commercial www.harveynorman.co.nz

Henkel NZ Ltd www.henkel.com

Hettich New Zealand www.hettich.co.nz

Homag www.homag.com

Innergy www.innergy.com

ITI NZ www.iti.net.nz

Joinery IT www.joineryit.co.nz

Kantek www.kantek.co.nz

Laminex New Zealand www.laminexnewzealand.co.nz

Leitz Tooling NZ Ltd www.leitz.co.nz

Machines ‘R’ Us Ltd www.machinesrus.co.nz

Miles Nelson MF Co Ltd www.milesnelson.co.nz

Mirotone NZ Ltd www.mirotone.com

Mulford NZ Delivering Solutions www.mulford.co.nz

Nelson Pine Industries Ltd www.nelsonpine.co.nz

New Zealand Panels Group www.nzpanels.co.nz

Panelform Ltd www.panelform.co.nz

polytec www.polytec.co.nz

Rehau Limited www.rehau.com/au-en

Resene Paints Ltd www.resene.co.nz

Seearco Industrial Abrasives www.seearco.co.nz

Southern Hospitality www.southernhospitality.co.nz

Steelfort Engineering Ltd www.steelfort.co.nz

Superior Doors Ltd www.superiordoors.co.nz

Thermawood www.thermawood.co.nz

Unique Hardware Solutions Ltd www.uniquehardware.co.nz

W & R Jack Ltd www.jacks.co.nz

Woodman Hardware www.woodmannz.co.nz

Wurth New Zealand Ltd www.wurth.co.nz

CENTRAL

Al-Wood Joinery (2019) Ltd

7 Arthur Street, Pahiatua, Ph 06 376 8692, contact Gus Shilvock.

Benchtop Surfaces Ltd

590 Tremaine Ave, P. North. Ph 06 356 9384, contact James Hurren.

Bespoke Joinery & KItchens

Limited

1 Sutton Plc, Kelvin Grove, Palmerston North. Ph 06 357 6429, contact Blake Simpson.

Careys Joinery (1989) Ltd

7 Bowen St, Marton. Ph 06 327 7949, contact Shaun McDowell.

Counter Concepts

16 Bisley St, Palmerston North, ph 06 355 5971, contact Graeme Andrews.

D-Mac Joinery Ltd

517 Lees Rd, RD5, Feilding, 4775, ph 027 457 0490, contact Drew McBride.

Hansens

55 Bennett Street, Cloverlea, Palmerston North, ph 06 354 4181, contact Kate Jetley.

Heritage Doors Ltd

3 Muhunua West Road, Ohau, Levin, Ph 0274 418 934, contact Tod Aitken. NZS4211 Affiliated.

H.R. Jones & Co. Ltd

60 Aorangi St, Feilding. Ph 06 323 4388, contact Mark Pickford. NZS4211 Affiliated.

Jeff Clayton Joinery

42c Bennett Rd, Palmerston North. Ph 06 357 1736, contact Jeff Clayton.

Mastercraft Kitchens By Healey

127 Keith St, Roslyn, Palmerston North, Ph 06 355 4646, contact Kristine Holmes.

Murray Judd Joinery Limited

25 Station Street, Woodville, Ph 06 376 5043, contact Murray & Tessa Judd. NZS4211 Affiliated.

Rob O’Keeffe Joinery Ltd

368 Heads Rd, Wanganui. Ph 06 344 5040, NZS4211 Affiliated.

Reilly Joinery

18A Parkview Ave, Feilding, Ph 06 323 3743, contact Andrew Reilly. NZS4211 Affiliated.

Sayer Industries Limited

123 Cuba Street, Palmerston North 4410 Ph 06 355 8242.

SB Joinery Ltd

2 Edward Street, Pahiatua 4910, Ph 027 979 0368, contact Scott Beales.

TBB Joinery Limited

51 Grey Street, Feilding 4702, Ph 022 633 2928, contact Bruce Birrell.

Townshends Joinery 2024 Limited

59 Makomako Rd, Palmerston North. Ph 06 354 6699, contact Livvy Kendrick. NZS4211 Affiliated.

The Joiner – Leighton Judd Ltd

50 Johnston Street, Foxton, Manawatu, Ph 06 363 5119, contact Leighton Judd

UCOL Princess St, Palmerston North. Ph 06 952 7001, contact Lindsay Tamblyn. NZS4211 Affiliated.

Unique Timber Joinery

143B Gillespies Line, RD 5, Palmerston North, Ph 06 355 2654, contact James Griffin. NZS4211 Affiliated.

WDA Installations

12 Serenity Cres, Kelvin Grove, Palmerston North, 4414. Ph 027 443 1541, contact Craig Buckley.

TARANAKI

Broadway Joinery

381 Broadway, Stratford, Ph 06 765 6829, contact Graham Podjursky.

Elite Kitchens 2004 Ltd

23 Oropuriri Road, New Plymouth 4312, Ph 06 759 8221, contact Sean Rice.

Hawera Kitchens and Furniture Ltd

24 Glover Road, Hawera 4610, Ph 06 278 7044, contacts Klinton Hunt / Lance Hunt.

In 2 Kitchens Limited

78 Portia Street, Stratford, Ph 06 765 4058, contacts Brent and Jo Russ. NZS4211 Affiliated.

Jones & Sandford Joinery Ltd

285 St Aubyn Street, New Plymouth, Ph 06 759 9251, contact Roger Jones.

KP Joinery Ltd

2 Dowding Place, Waitara. Ph 06 754 4726, contact Ken Parsons.

MacLeod Joinery

42 Beach St, New Plymouth. Ph 06 757 8172, Kieran MacLeod. NZS4211 Affiliated.

Mode Kitchens

77B Hurlstone Drive, Waiwhakaiho, New Plymouth 4312, ph 027 521 8527, contact Fraser Hall.

New Plymouth Joinery Ltd

10 Cody Place, New Plymouth. Ph 06 758 8580, contact Roger Paul or John Ancell. NZS4211 Affiliated.

Newton Gordge Joinery 2016 Ltd

67 Breakwater Rd, New Plymouth. Ph 06 751 5065, contact Scott Dudley. NZS4211 Affiliated.

Pace Modular 2021 Ltd

113 De Havilland Drive, Bell Block, New Plymouth. Ph 06 755 4012, contact Lew Dickie or Bryan Frank.

Rhys Powell Joinery

7A Euclid Street, New Plymouth. Ph 06 753 3822, contact Rhys Powell. NZS4211 Affiliated.

HAWKES BAY

POVERTY BAY BAY

Brittin Builders Ltd

T/A Parkhill Joinery

475 St Georges Road South, Havelock North, Ph 06 877 7623, contact Tom Robertson. NZS4211 Affiliated.

Burley Kitchens & Cabinetry Ltd 14 Lipton Pl, Onekawa, Napier. Ph 06 843 5588, contact Craig Burley.

Cherrywood Joinery Ltd 11 PotaeAve, Lytton West, Gisborne. Ph 06 868 0971, contact Richard Childs.

Christie Builders & Joiners 11 Husheer Place, Onekawa, Napier, Ph 06 843 6676, contact Peter Christie. NZS4211 Affiliated.

Classic Kitchens Napier Ltd 8 Lipton Place, Onekawa, Napier. Ph 06 843 6500, contact Stuart Bryson.

D Stevens Ltd

336 Childers Road, Gisborne, Ph 06 867 5700, contact Peter Claydon. NZS4211 Affiliated.

European Designer Kitchens 80 Taradale Rd, Napier. Ph 06 843 7319, contact Murray Nattrass.

Gallery Kitchens Ltd 4 Cadbury Rd, Napier. Email - admin@ gallerykitchens.co.nz, contact Sharon James.

Gemco Trades Ltd 13 Martin Pl, Havelock North. Ph 06 873 8756, contact Craig Russell. NZS4211 Affiliated.

Green Joinery Ltd

30 Morris St, Napier, 4110. Ph 027 750 8603, contact Jae Green.

Kakapo Joinery

2/19 Mersey Street, Pandora, Napier, Ph 021 0258 9617, contact Robin Holthusen

Molloy Joinery Ltd 14-16 Husheer Pl, Onekawa, Napier. Ph 06 843 5037, contact Simon Molloy. NZS4211 Affiliated.

MCL Joinery Ltd

1104 Kaipo Rd, Hastings, Ph 06 876 0252, contact John Bower. NZS4211 Affiliated.

McIndoe Kitchens 8 Carnegie Rd, Onekawa, Napier 4110. Ph 06 843 3880, contact Duane Todd.

Natural Edge Joinery 174 Brookvale Road, Havelock North 4130. Ph 027 232 8838, contact James Coutts.

Parkhill Joinery (Brittan Builders Ltd) 457 St Georges Rd Sth, Havelock North. Ph 06 877 7623, contact Tom Robertson.

Rabbitte Joinery Limited 807 Warren St, Hastings. Ph 06 870 8911, contacts Greg & Trudi Rabbitte. NZS4211 Affiliated.

Summerfield Joinery 4 Innes Street, Gisborne, Ph 06 868 4236, contact Dale Summerfield. NZS4211 Affiliated

Sunshine Joinery Ltd 44 Pandora Road, Ahuriri, Napier, Ph 06 844 6105, contact Rick Martin

WELLINGTON

Ace Kitchens & Laminates Ltd

50 Montgomery Crescent, Clouston Park, Upper Hutt 5018, Ph 04 526 9795, contact Ivan Johnson

Carroll’s Joinery Limited

148 Lincoln Road, Masterton. Ph 06 377 3160, contact Richard Carroll.

Commercial Joinery Wellington Ltd

232 Rongotai Road, Kilbirnie, Wellington. Ph 04 387 2050, contact Grant Smith

Craftbuilt

77 Hokio Beach Rd, Levin, 5510. Contact Simon Raikes

David Barker Custom Cabinets

52 Cooper St, Karori, Wellington, Ph 027 248 8140, contact David Barker. NZS 4211 Affiliated.

David Ladd Joinery Ltd 1a Rewa Tce, Tawa. Ph 04 237 9175.

Ferndale Furniture

67 Seaview Rd, Lower Hutt, Ph 04 568 7879, contact Grant MacDonald.

Goldmark Group Ltd

9-11 Jean Batten St, Kilbirnie, Wellington. Ph 04 387 8964, contact David Goldsack.

Gourmet Wood Inc. Ltd

64 Riverbank Rd, Otaki, Kapiti Coast. Ph 027 338 4790

Interbuild Commercial Interiors Ltd

115 George St, Stokes Valley, Lower Hutt 5019, Ph 04 939 8760, contact Neil Shackleton.

Jacobson Joinery Services

101 Brooklyn Rd, Carterton, Wairarapa 5713. Ph 06 379 8066, contact Vic Jacobson.

Joinery Productions Ltd

457 Jackson Street, Petone, Ph 04 569 8808, contact Wayne Wilmshurst. NZS4211 Affiliated.

Kapiti Kitchens Ltd

345 Kapiti Rd, Paraparaumu Beach, Kapiti. Ph 04 902 5551, contact Kristine Holmes.

L & P Crown Joinery (2002) Ltd

37 Burden Avenue Wainuiomata. Ph 04 564 8895, contact Jeremy Patmore. NZS4211 Affiliated.

Living Timber European Joinery & Furniture Ltd

64 Fisk Street, Naenae, Lower Hutt, Ph 04 567 2577, contact Horst Mundt. NZS4211 Affiliated.

Maycroft Construction Ltd

16 Gregory Street, Lower Hutt, Ph 04 567 0014, contact Chris Fayen

Maymorn Joiners Ltd

247 Parkes Line Rd, Upper Hutt, Ph 04 526 6657, contact Anthony Neustroski. NZS4211 Affiliated.

M B Brown Ltd

67 Ngaumutawa Rd, Masterton, Wairarapa. Ph 027 538 8154, contact Jamie Searle.

My Joiner Ltd

Tweakit Joinery Solutions

200 Tutaki Road, Kelvin Grove, Palmerston North. Ph 06 357 2897, contact Vaughn Tongs.

Awapuni Joinery Ltd

22 Parkinson Street, Gisborne, Ph 06 867 3301 contact Peter Webster.

Alexander Joinery Ltd

72 Thames St, Pandora, Napier 4110. Ph 06 843 2036, contact Jason Collins.

Waipukurau Joinery Limited 2322 Takapau Road, Waipukurau. Ph 06 858 9961, contact Greg O’Kane.

64 Ruskin Rd, Newlands, Wellington 6037. Ph 021 487 500, contact Ulrich Kohler.

NZ Cabinetmaker Ltd

39 Park St, Kingsley Heights, Upper Hutt, 5019, Ph 021 923 231, contact Benn Hamilton.

Orchard Joinery Ltd

14-18 Te Roto Drive, Paraparaumu, Ph 04 298 3380, contact Geoff Orchard. NZS4211 Affiliated.

Paraparaumu Doors & Joinery

14 Manchester St, Paraparaumu, Ph 04 297 2233, contact Tony Thomson. NZS4211 Affiliated.

Pete’s Joinery & Building Ltd

205 Main St, Greytown. Ph 06 304 9137, contact Peter Algie, Rhys Severn or Paul Coventry. NZS4211 Affiliated.

Prestige Joinery Limited

140 Perry Street, Masterton, Ph 06 377 1331, contact Gregory Morgan. NZS4211 Affiliated.

Redwood Kitchens

40a Main Rd, Tawa, Wellington. Ph 027 8855 441, contact Keith Hollow.

Renalls Joinery Limited

147 -155 High St Sth, Carterton. Ph 06 379 8008, contact Trevor Kenavan. NZS4211 Affiliated.

Samuel Martin Ltd

6 Woodman Drive, Tawa, Wellington. Contact Sam Lewis 022 024 4712

Stylish Interiors Ltd

29D Dragon St, Granada North, Wellington. Ph 04 473 1944, contact Mathew Gubb. NZS4211 Affiliated.

The English Craftsman

4 Mountbatten Grove, Upper Hutt 5018, contact Paul Winstanley 021 103 6683.

The French Door Factory

14A Kingsford Smith Street, Rongotai, Wellington. Ph 04 387 7822, contact Alan Chambers

The Joinery King Limited

73 Hutt Road, Thorndon, Wellington, Ph 04 473 6367, contact Tony King. NZS4211 Affiliated.

Upspec Joinery

72 Sydney St, Petone, Lower Hutt 5012. Ph 021 0279 2067, contact Rueben Hanns-Voyle.

Wainui Joinery (1977) Ltd

34 Burden Ave, Wainuiomata Lower Hutt. Ph 04 564 7011, contact Nikki Wynne. NZS4211 Affiliated.

Well Hung Joinery

21 Lower Tyers Road, Ngauranga, Wellington, Ph 04 494 7230, contact Stephen Fairbrass. NZS4211 Affiliated.

Wellington Joinery and Kitchens Ltd

8a Burgess Road, Johnsonville, Wellington. Ph 04 478 7652, contact Phil Schwartfeger. NZS4211 Affiliated.

NELSON MARLBOROUGH

A K Joinery Ltd

Units 3-5, 28 Dublin Street, Picton, Ph 03 573 6860, contact Andrew Kenny.

Bays Joinery Ltd

6 Tokomaru Place, Wakatu Industrial Estate, Stoke, Nelson, Ph 03 544 0087, contact George Molnar. NZS4211 Affiliated.

Brightwater Cabinetmaker & Joinery Ltd

8c Merton Place, Annesbrook, Nelson 7011, Ph 03 548 6400, contact James Palmer.

Building Connexion Ltd

ITM Joinery, 16-18 King Edward St, Motueka, Ph 03 528 7256, contact Paul Rusbatch. NZS4211 Affiliated.

Cantwell Joinery and Window Centre

15 Bristol Street, R D 4, Riverlands, Blenheim, Ph 03 578 3375, contact Ian Cantwell.

Complete Kitchens Ltd

415 Main Road, Spring Grove, Wakefield, Ph 03 539 0055, contact Hamish Drummond.

Cooper Webley (2006) Ltd

64 Beatty Street, Tahunanui, Nelson, Ph 03 547 0010, contacts Noel Tait / Michelle Hill.

James Neal Joinery

35 Fell Street, Grovetown, Marlborough, Ph 03 577 7872, contact James Neal.

Matai Joinery Nelson Ltd

26 Quarantine Road, Stoke, Nelson 7011, Ph 03 547 7990, contact Greg Couper. NZS4211 Affiliated.

Motueka Joinery Co 2001 Ltd

20 Old Wharf Road, Motueka, Ph 03 528 9012, contacts Phil or Barb Sharkie.

Nazareth Joinery 2017 Ltd

1 Warwick Street, Mayfield, Blenheim, 7201. Ph 03 578 8752, contact Leigh Jones.

Orange Building Group Joinery Ltd

16 Nayland Road, Stoke, Nelson. Ph 03 547 9784, contact John Andrew.

Re Space Limited

2 Kidson Place, Stoke, Nelson 7011, Ph 03 547 1636, contact Hamish Northcott.

Prestige Furniture & Joinery Ltd

38 Beach Road, Richmond, Nelson, Ph 03 544 1789, contact Richard Dohmen.

Quaystone Holdings Ltd

42 Batchelor Ford Rd, Motueka 7120. Ph 03 528 6140, contact Matt Hinton.

Ruby Bay Joinery Ltd

8 Warren Plc, Mapua, Nelson. ph 03 540 2123 contact Wayne Roberts. NZS4211 Affiliated.

The Sellers Room

9 Echodale Place, Stoke, Nelson, Ph 03 547 7144, contact Margarette Sellers

Viking Furniture & Joinery Ltd

88 Vanguard Street, Nelson, ph 03 548 0493, contact Barry Thomas. NZS4211 Affiliated.

Waimea West Joinery Ltd 111 Beach Road, Richmond, Nelson, Ph 03 544 0177, contacts Kathy & Alan Gibbs. NZS4211 Affiliated.

CANTERBURY

Adrian Harris Woodcraft Unit J, 3 Timothy Place, Wigram, Christchurch 8042, Ph 03 348 6996, contact Adrian Harris. NZS4211 Affiliated.

Advanced Joinery Ltd

27 Watts Road, Sockburn, Christchurch, Ph 03 348 7700, contact Greg Ayers. NZS4211 Affiliated.

Alsop Joinery Ltd

18 Alloy Street, Sockburn, Christchurch, Ph 03 348 4666, contact Paul Baker. NZS4211 Affiliated.

Anderson Joinery Ltd

247 Alford Forest Rd, Ashburton. Ph 03 308 2988, email: anderson.joinery@xtra.co.nz, contact Dougal Anderson.

Architectural Joinery Ltd

82 Buchan Street, Sydenham, Christchurch. Ph 03 377 6760, contact Andrew Clark

Ashburton Joinery Limited 8 John Street, Ashburton, Ph 03 308 5059, contact James Donaldson. NZS4211 Affiliated.

Bates Joinery (2008) Ltd

101 Shortland Street, Christchurch 8061, Ph 03 388 8111, contact Mark Allworthy. NZS4211 Affiliated.

Bower Joinery

12a Bower Ave, Christchurch. Ph 03 388 2924, contact John Mudgway.

Brent Johnson Joinery Ltd

306 Flaxton Road, Rangiora, North Canterbury. Ph 03 313 6256, contact Brent Johnson. NZS4211 Affiliated.

Busch Joinery Limited

1737 Boundary Road, R D 3, Ashburton, Ph 027 563 4537, contact Nathan Busch

Creative Joinery Ltd

Unit 1/ 7 Homersham Pl., Burnside. Ph 03 358 4900, contact Wayne Brown.

Don’s Joinery Ltd

43 Sandown Cres, Christchurch. Ph 03 382 0828, contact Don McClintock.

Douglas Furniture Ltd

80 Hay Rd, Wigram, Christchurch, 8240. Ph 03 377 3597, contact: Howard Nossiter.

Dynamic Joinery & Kitchens Ltd

6b Maces Road, Bromley, Christchurch, Ph 022 087 9918, contact Ben Vyas.

East Joinery Ltd

Unit 3, 56 Wickham St, Bromley Christchurch. Ph 021 138 3119.

Elite Joinery Ltd

Unit 1, 97A Sawyers Arms Road, Papanui, Christchurch, Ph 03 354 8311, contact Hayden & Sarah Illingworth.

Evolution Interiors Limited

19 Stanmore Road, Phillipstown, Christchurch, Ph 03 381 1633, contact Karl Kitchingham.

Finesse Joinery

423 Main North Road, Christchurch. Ph 03 352 3457, contact David Street.

Hagley Kitchens

6 Nazareth Ave, Addington, Christchurch. Ph 03 961 0703, contact Nathan Moore.

Haspert Joinery

95B Main South Rd, Sockburn, Christchurch. Ph 021 031 2666, contact Allan Zhu.

Homeview Building Products Ltd

772 Halswell Junction Rd, Hornby, Christchurch. Ph 03 343 9949, contact Howard Stone. NZS4211 Affiliated.

House of Joinery

168 Voss Rd, Ladbrooks RD2, Canterbury 7672, Ph 021 955 959, contact Johnny Alsop.

Joinery by Design 15 King Edward Tce, Woolston, Christchurch. Ph 03 384 8461, contact Evan McLachlan & David Phillips. NZS4211 Affiliated.

Joinery Concepts 2006 Ltd

25 Osbourne Street, Phillipstown, Christchurch, Ph 03 381 1066, contact Peter Robertson.

Joinery Scene Ltd

43 Sonter Rd, Wigram, Christchurch. Contact Richard Hill 021 623 446.

Kitchen Maker Christchurch Ltd

39 Ballarat Way, Wigram, Christchurch, 8025. Ph 021 988 868, contact David Li.

LX Joinery

39A Buchanans Road, Sockburn 8042, Christchurch, Ph 03 342 9605, contact Steve Mangan. NZS4211 Affiliated.

Mackay Kitchens Ltd

345 Brougham Street, Sydenham, Christchurch 8023, Ph 03 365 3988, contact Chris Moore.

MCM Furniture

102 Pacific Drive, RD 3, Leeston, 7683, contact Robert Kulesza mob 027 334 4077.

Misco Joinery

62 Williams St, Kaiapoi, Canterbury 7630, Ph 03 383 4384, contact Penny Abell.

Modern Age Kitchens & Joinery Ltd

127 Montreal St, Sydenham, Christchurch 8023. Ph 03 365 1675 contact Grant Woodham.

Modulink Screen Partitions 2012 Ltd

35 Lunns Rd, Middleton, Christchurch, Ph 03 338 6464, contact Sam Bain.

Murray Hewitt Joinery Ltd

25A Lunns Rd, Christchurch, Ph 03 343 0360, contact Murray Hewitt. NZS4211 Affiliated.

Murray Milne Ltd

231 Cameron St, Netherby, Ashburton. Ph 03 308 8018, contact Murray Milne.

MWF Manufacturing Ltd

Unit 3, 11 March Plc, Belfast, Christchurch. Ph 03 365 6218, contact Gary Altenburg. NZS4211 Affiliated.

Nordzco Joinery

652 Halswell Junction Rd, Hornby, Christchurch. Ph 03 348 4890, contact Wayne Melrose.

NZ Doors (2004) Ltd

41 Anchorage Road, Hornby, Christchurch, Ph 03 344 2516, contacts Ron and Lisa Zwarst. NZS4211 Affiliated.

(Master Joiners membership continued overpage)

Paul Renwick Joinery Ltd

PO Box 11 047, Sockburn, Christchurch, 8443. Ph 03 349 7049, contact Paul Renwick.

R A Hale Ltd

126 Hazeldean Rd, Addington, Christchurch. Ph 03 3666 909, contact Donald Bisphan. NZS4211 Affiliated.

Ruben’s Joinery Limited

402 Bethels Road, 4 R D, Christchurch, Ph 03 329 5458, contact Ruben Patchett. NZS4211 Affiliated.

Ryan’s Kitchens and Joinery

9 Kilronan Plc, Wigram, Christchurch 8041, Ph 03 348 7921, contact Ryan Butler.

Sockburn Joinery

33 West Coast Rd, Yaldhurst, Christchurch. Ph 03 342 6044, contact Tony Lemmens.

Silver Fern KItchens

12 Princess St, Addington Christchurch. Ph 021 288 8373, contact Gary Lin.

Sydenham Joinery Ltd

6 Dalziel Pl, Woolston, Christchurch, Ph 03 379 6840, contact Grant Weston. NZS4211 Affiliated.

The Joiner Shop 2024 Ltd

19 Beach Road, Kaikoura 7300, Ph 03 319 5562, contact Ash or Tania Hastelow.

Timber Doors & Windows 2007 Ltd

194 Wordsworth Street, Sydenham, Christchurch 8023, Ph 03 379 1725, contact Martyn Neville. NZS4211 Affiliated.

Timber Tru Ltd

411 Tuan St, Linwood, Christchurch, Ph 03

389 2986, contact Tony van der Plas. NZS4211 Affiliated.

Trends Kitchens Ltd

34A Parkhouse Road, Sockburn, Christchurch, Ph 03 343 5242, contact James McKeown

Woodshack Kitchens

113 Izone Drive, Rolleston, Canterbury 7675, Ph: 03 347 9790, contact Mark Davis.

WAITAKI

Alpine Joinery

480 Fairview Road, No 2 RD, Timaru, ph 03 688 5748, contact Paul Butchers.

Barrett Joinery Ltd

204 Hilton Highway, PO Box 2115 Timaru. Ph 03 688 4738, contact Mark Mitchell. NZS4211 Affiliated.

Duncan Joinery Limited

20 King Street, Temuka, South Canterbury, Ph 03 615 7327, contact Craig Duncan.

Firman Joinery Ltd

10 Endeavour Cres, Nth Oamaru Business Park, Oamaru. Ph 03 434 1561, contact Gary Firman. NZS4211 Affiliated.

Geraldine Timber Products

27 High Street, Geraldine, Ph 03 693 9598, contact Paul Autridge. NZS4211 Affiliated.

J E Dennison Ltd

5 Redruth St, Timaru. Ph 03 688 0029, contact Gary Dennison. NZS4211 Affiliated.

JMAC Joinery Ltd

7 Laughton Street, Washdyke, Timaru, Ph 03 688 2725, contact Craig Mason. NZS4211 Affiliated.

Joinery Zone 2012 Ltd

27 Redruth St, Timaru. Ph 03 688 8223, contact Warren Atwill. NZS4211 Affiliated.

Lunds Joinery Ltd

33a Grants Rd, PO Box 128, Timaru. Ph 03 688 9149, contact Mark Albert. NZS4211 Affiliated.

Millennium Joinery Ltd

2 Regina Lane, Oamaru. Ph 03 437 0227, contact Michael Sandri. NZS4211 Affiliated.

Paterson Joinery

307 Rosewill Valley Road, Timaru. Contact Matthew Valentine, info@patersonjoinery.co.nz, ph 027 432 1422.

Rycole Joinery

44 Homestead Road, 1 DRD, Oamaru, Ph 03 434 5012, contacts Darryl and Adrienne Whitburn NZS4211 Affiliated.

OTAGO SOUTHLAND

Abernethy Joinery

18 Melbourne Street, Dunedin, Ph 03 456 1654, contact Ian Abernethy. NZS4211 Affiliated.

B & M Joinery Ltd

4 Ree Crescent, Cromwell, Ph 03 265 2077, contact Brendon Munro. NZS4211 Affiliated.

Coronet Woodware (2017) Ltd

99 Glenda Drive, Queenstown, Ph 03 442 3700, contact Colin Strang. NZS4211 Affiliated.

Mearns and Leckie 2024 Limited

7 Gow St, Mosgiel 9024. Contact Michael Lyon 027 489 20207. NZS4211 Affiliated.

Mojo Modern Joinery Ltd 96 Gair Ave, Cromwell, Ph 03 445 0128, contact Craig Harrison.

Nasko Factory Ltd

22A Margaret Place, Frankton Industrial, Queenstown, Ph 03 442 3206, contacts Stephen Walak, Amanda Trainor. NZS4211 Affiliated.

Nigel Molloy Joinery Limited

300 Great North Road, Winton, Ph 03 236 0399, contact Nigel Molloy. NZS4211 Affiliated.

O’Brien Group 2012

8 Gow Street, Mosgiel, Ph 03 489 3849, contact Peter O’Brien.

PDL Kitchens

113B North Rd, Invercargill, Southland 9810, Ph 027 424 5578, contact Paul Lindsay.

Queenstown Joinery

53 Industrial Place, Queenstown, Ph 03 442 7555, contact Kevin Harradine. NZS4211 Affiliated.

Riversdale Joinery Ltd

105 Liverpool Street, Riversdale, Southland 9744, Ph 03 202 5527, Barry O’Connor. NZS4211 Affiliated.

Ron Kirk Joinery Ltd

403 Kaikorai Valley Road, Dunedin, Ph 03 453 5718, contact Hayden Kirk. NZS4211 Affiliated.

Steadfast Joinery Limited

41 Ward St, CBD, Dunedin 9016, Ph 03 470 1990, contact Leroy Cunningham.

Stevenson & Williams Ltd Joinery

Elite Joinery Solutions

104 Middle Street, Pukerau, ph 03 208 5819, contact Regan Hughes.

Fiordland Joinery

10 Caswell Rd, Te Anau, Southland 9600, Ph 03 249 4339, contact Simon Irwin.

Form Joinery

132 Ballantyne Rd, Wanaka, Otago 9305. Ph 021 483 676, contact Nick Elliott.

G L Stevenson Builders Ltd

53 Stone St, Dunedin 9010, Ph 027 7146 523, contact Michael Stevenson

Howley Joinery Ltd

224 Mersey Street, Invercargill, Ph 03 214 1055, contact Glen Howley. NZS4211 Affiliated.

JP Quality Kitchens Limited

66 Vogel Street, Dunedin, Ph 021 474 300, contact John Peddie.

Joinery Specialists 1997 Ltd

PO Box 502 Dunedin, Ph 03 488 2371, contact Graeme Emmerson.

Leading Edge Joinery Specialists Ltd

13 Surrey Street, Gore, Ph 027 6774 729, contact Donald McGuigan. NZS4211 Affiliated.

Leith Joinery

2 Roberts St, Dunedin. Ph 03 477 0115, contact Peter Leith. NZS4211 Affiliated.

Masterwood Joinery 2008

28 McNulty Road, Cromwell, Ph 03 445 0313, contact Dave Wilson. NZS4211 Affiliated.

64 Prince Albert Rd, St Kilda, Dunedin. Ph 03 455 4034, contact Andrew Duncan. NZS4211 Affiliated.

Stewart Construction Ltd PO Box 2125, St Kilda. Ph 03 455 2057, contact Barry Taylor. NZS4211 Affiliated.

Urban Woodwork LTD

10A Gow St, Mosgiel, Dunedin 9024. Ph 027 284 7030, contact Ben King.

Wanaka Joinery & Glass Ltd 52 Ballantyne Road, Wanaka, Ph 03 443 7890, contact Kent McIntyre. NZS4211 Affiliated.

Wedgerwood Joinery Ltd 11 Ngapara St, Alexandra. Ph 03 448 8832, contact Russell Mair. NZS4211 Affiliated.

Wood Solutions

5 Orari St, Sth Dunedin, Dunedin. Ph 03 479 2323, contact Daniel Sampson. NZS4211 Affiliated.

Blum shop Click. Order. Install. ordering made easy

Whether you’re planning ahead for upcoming projects or simply keeping an eye on new solutions entering the market, having confidence in the ordering process makes integrating new products faster and easier from day one.

To help with that, we’ve continued refining the Blum Shop experience based on your feedback. Our most recent updates have made the platform easier to navigate and use. You’ll now find assembly and technical instructions directly on product pages, a streamlined order history view that makes reordering effortless, and a comparison tool that allows you to evaluate up to three products side-by-side. These improvements

Blum frisbees

are designed to support smoother planning, clearer decision-making, and more efficient ordering — without disrupting your workflow.

Blum Shop will continue to evolve, and your insights play a key role in shaping what comes next. If you have suggestions, ideas, or features you’d like to see, we’re always open to hearing them. Please reach out to your Blum Account Manager, because we genuinely value your input.

With the recent updates to REVEGO, now’s a great time to explore the Blum Shop and discover our platform designed to suit you, the cabinetmaker.

Visit shop.blum.nz to get started!

Cut. Build.Throw. Catch summer with Blum

Blum is continuing to enjoy summer with a bit of fun — we’re giving away 100 flying discs to the industry! Be one of the first 100 to scan the QR code and fill in your company delivery details, and a flying disc will be on its way to you. No strings attached — we won’t save or use your details for anything other than getting your flying disc to your door. www.blum.com

Blum automation

Expanding capacity to support a growing industry and support industry demand more effectively during busy periods. As the industry continues to pick up momentum, with strong order growth throughout the end of 2025, Blum appreciates the patience and support shown by customers throughout this improvement phase.

Blum is in the midst of a significant upgrade to its Automatic Warehouse in Auckland, marking an important step in strengthening supply performance and ensuring future growth across the joinery and cabinetry industry. The upgrade, which is now well underway, will more than double current storage capacity once completed, increasing efficiency, improving responsiveness, and helping minimise delivery delays during peak seasonal periods.

To maintain service throughout the upgrade, the warehouse team has been operating two shifts, up to six days a week, and the investment being made now in system expansion and automation will support a faster, more agile supply chain for years to come. Once complete, the upgraded warehouse will allow Blum to react quickly to urgent orders

The company looks forward to sharing the benefits of the new system and celebrating its new showroom and warehouse facilities in the coming months.

To find out more about our latest upgrades and improvements, touch base with your Blum Account Manager and make a time to pop into your nearest Blum branch, or follow us on Facebook or Instagram @ blumnewzealand

CIFF Guangzhou 2026

CIFM / interzum guangzhou: Connecting the Global Supply Chain

As the global home-furnishing supply chain undergoes rapid transformation, the industry is shifting from scale expansion to value enhancement, driven by digital reconstruction, sustainability goals and global industrial integration. Manufacturing technologies, materials innovation and hardware systems are becoming central to the competitiveness of the furniture sector worldwide.

In this context, CIFM / interzum guangzhou, held during phase 2 of the 57th CIFF Guangzhou (March 28–31, 2026) at the Canton Fair Complex, confirms its position as a leading international platform for furniture production technologies and upstream supply-chain innovation.

The exhibition integrates global innovation resources with the industrial chain, presenting a comprehensive vision of the future home-furnishing supply ecosystem. The 2026 edition

strengthens its role as an innovation engine through three major platforms dedicated to intelligent manufacturing, materials innovation and hardware technology.

The Platform for Intelligent Production Equipment brings together global leaders in woodworking machinery, upholstery machinery, laser technologies and digital production systems. Companies such as HOMAG, BIESSE, WEINIG, WEMHÖNER, LEITZ, LEUCO, FREUD, Nanxing, Excitech, QUICK, Fortran and KUKA will showcase advanced solutions including digital production lines, flexible intelligent processing centers and laser edge-banding technologies, demonstrating the transition toward intelligent, flexible and low-carbon manufacturing.

A new initiative, the Global Debut Gala, will spotlight strategic product launches from leading equipment manufacturers, reinforcing the exhibition’s role as a global stage for innovation in furniture production technologies.

The Platform for Home Design Material Selection focuses on CMF innovation, sustainable materials and functional surface solutions. International brands such as Schattdecor, LamiGraf, Interprint, REHAU, RENOLIT, Pfleiderer, SwissKrono, AHEC, HENKEL, BOSTIK and LINAK will present new material technologies supporting customization, upholstery and whole-house design solutions, emphasizing recyclability, environmental performance and aesthetic innovation.

The Platform for Home Hardware Innovation Experience explores intelligent hardware systems and IoT integration. Brands including OVVO, Ferrari, L&S Lighting, SACA, TUTTI, Topstrong, GARIS, MEATON and ADAMS will present solutions such as intelligent hinges, hidden slide systems, electric lifting mechanisms and adaptive locking technologies, demonstrating the fusion of functionality, durability and design.

Strengthening its global dimension, CIFM / interzum guangzhou connects upstream supply-chain companies with international markets. With buyers from 187 countries and regions attending previous editions, the exhibition continues to foster collaboration through year-round matchmaking initiatives, industry forums, roadshows and global promotion activities spanning Europe, North America and the Middle East. By integrating intelligent manufacturing, materials innovation and global cooperation, the exhibition demonstrates how the upstream supply chain is becoming a strategic driver of the furniture industry’s future development.

57th CIFF Guangzhou 2026 phase 1 - 18-21 March 2026

home furniture, homedecor & hometextile, outdoor & leisure furniture phase 2 - 28-31 March 2026

office furniture, commercial furniture, hotel furniture and furniture machinery & raw materials

PRODUCT focus

Fastmount acoustic clip nominated for DAME award at METSTRADE 2025

New Zealand based Fastmount, a global leader in panel mounting systems, is proud to announce the launch of the VL-PF3 Female Recessed Mount Acoustic Clip, a purpose-designed solution for mounting PET acoustic panels. The innovation has earned a nomination for the prestigious DAME Design Award, recognizing excellence in marine equipment design.

As acoustic panels made from recycled PET bottles become increasingly popular in commercial interiors, the VLPF3 offers a sustainable, glue-free mounting system that supports full panel recyclability. Designed for fast, flush installation, the VL-PF3 is ideal for modular wall and ceiling applications in retail, hospitality, healthcare, and education environments. Crafted from durable acetal, the VL-PF3 provides a flush, secure fit with a 2mm gap between panel and substrate. It supports panels with a minimum density of 144kg/m³, and can handle up to 6kg per m², making it suitable for both wall and ceiling applications.

The clip is reusable and recyclable, and can be reground at the end of its life for use in new products— supporting circular design principles. Installation is fast and precise, reducing labour time and rework. The VL-PF3 is part of Fastmount’s Very Low Profile (VL) Range, which includes the VL-M3 male clip and VLCP3 center point for accurate alignment.

The VL-PF3 is ideal for wall and ceiling applications in retail, hospitality, healthcare, and education environments.

Key features of the VL-PF3 include:

• Glue-free push-fit system for easy installation and recyclability

• Durable acetal construction, reusable and recyclable

• Flush fit with 2mm gap, supporting panels up to 6kg/ m²

• Efficient installation for speed and precision

• Part of Fastmount’s VL Range, compatible with VLM3 and VL-CP3 clips

The VL-PF3’s nomination for the DAME Award highlights Fastmount’s commitment to sustainable innovation and precision engineering.

The product will be showcased at METSTRADE 2025 in Amsterdam from 18-20 November, where Fastmount will once again be showcasing its full range of products at stand 01.404.

Human judgement, dexterity, creativity and real-time decisionmaking — capabilities that AI cannot meaningfully replicate.

The jobs AI can’t touch

As artificial intelligence reshapes workplaces globally, a different story is emerging from New Zealand’s trades and service industries. While many professions face uncertainty, several career paths remain firmly future-proof - and urgently need more people.

Skills Group is New Zealand’s largest private training organisation and its Director of People, Jane Kennelly, says careers in hairdressing, plumbing, gasfitting and drainlaying, roofing, electrical and culinary arts stand out for their longterm resilience. These professions rely on human judgement, dexterity, creativity and real-time decision-making — capabilities that AI cannot meaningfully replicate.

“Whether you’re shaping hair, diagnosing a fault under pressure, adjusting the taste of a dish, working at height or reading a client’s needs - the real skill comes from interpreting the moment. These careers depend on people, not algorithms.”

At the same time, the trades themselves are evolving, driven by a wave of new digital tools. Across the sector, smart sensors, drone footage, digital plans and AR/VR simulations are increasingly standard in training and on-the-job learning.

New Zealand’s workforce data underscores the scale of opportunity. Industry estimates show the country is currently short around 6,000 electricians, while economics agency Infometrics forecasts more than 5,000 plumbing, gasfitting and drainlaying job openings through to 2030. “This imbalance between need and supply is one of the biggest opportunities for young people and career-changers,” Kennelly says. “If we don’t address it, New Zealand risks slowing down essential housing and infrastructure projects. These are not optional skills — they’re critical to how the country functions.”

Kennelly says families need a clearer understanding of the strength and future-proof nature of these careers.“Many parents still default to university as the safest pathway, unaware that some of the most secure, technology-proof careers sit within the trades,” she says. “These are specialist, future-focused professions that blend digital skill with realworld craftsmanship.”

Kennelly says the message for school leavers is clear: “Technology will change how we work, but these careers remain rooted in human skill. The future isn’t replacing tradespeople — it’s upgrading them.”

www.skills-group.org

The total CAD/CAM solution for all your manufacturing of Wood Metal Stone Plastic info@alphacam.co.nz www.alphacam.co.nz

P: 09 947 - 4288

MACHINERY

Wide range of used machines available Prowood Machinery Ltd

It’s the perfect design & machining software for people producing:

Kitchens Office fit-outs

Phone 09 442 5699 www.prowood.co.nz

NZ’s largest range of new & secondhand equipment

0800 522 577 www.jacks.co.nz

Machines that mean business

New Zealand SCM Agents

Phone 09 820 9486 www.machinesrus.co.nz

Checkmate

Enko

Farnese

Finishing

Hafele (NZ) Ltd

Halswell Timber

Hettich

Hideaway Bins

Homag IES

Jacks Kantek

Laminex

Leitz

Built-in Wardrobes Interior Joinery info@polyboard.co.nz www.polyboard.co.nz

P: 09 947 - 4288

NEST TECH

KDT 2 SERIES

Heavy duty, fast entry-level CNCs with performance and features not usually found at this level.

KDT 3 SERIES

Premium series delivering high precision, efficiency and reliability for demanding production.

KDT 3 SERIES CELL

Up to 50% more productivity with KDT’s affordable label, load and unload automation