Skip to main content

ITI Western Australia - Spec Frame 12.1 - Battens - Brochure v1.0

Page 1

ROOF BATTEN - N3 WIND <TITLE 1> H2-S TREATED <TITLE 2>

SPECFRAME 12.1 ITI Spec Frame® 12.1 is a versatile laminated veneer lumber (LVL) product used for high performace framing components used in residential timber framed construction applications. ITI Spec Frame® 12.1 framing makes for a straight and strong, roof batten. Manufactured from rotary peeled softwood logs, ITI Spec Frame® is carefully graded and arranged to disperse natural defects throughout the product, enhancing its overall strength. The veneers are then bonded using a marine-grade A-Bond adhesive. An insect repellent is incorporated into the glue line to protect against termite and borer attack south of the Tropic of Capricorn. Sizes (mm)

65x35 65x63

1.5 2.7

Weight (kg/m)

Lengths (m)

5.4 & 6.3 4.5

Pieces / Pack

90 50

Roof Beam Roof Batten Spacing (m) - Sheet Roof 250 (10kg/m2) - N3 Rafter Centres

Rafter

Batten Location

Roof Batten General Area 600 Within 1.2 of Corner / Edge

s

tre en C n

General Area

tte Ba

900

n

pa

S ten

t Ba of Ro Roof Batten Spacing (m) - Concrete Tile Roof 250 (40kg/m2) - N3

Rafter Centres

Batten Location General Area

600 Within 1.2 of Corner / Edge

Batten Overhang

35x65

63x65

0 300 450 600 0 300 450 600

1.2 1.2 0.5 1.2 1.2 0.5 -

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

Barge board or structural fascia fitted to ends of battens Minimum rafter width is 35mm Tables shown accommodate roof piches up to 250

Within 1.2 of Corner / Edge

General Area 1200 Within 1.2 of Corner / Edge

Batten Overhang

35x65

63x65

0 150 300 450 600 0 150 300 450 600 0 150 300 450 600 0 150 300 450 600 0 150 300 450 600 0 150 300 450 600

1.2 1.2 1.2 0.9 0.4 1.2 1.2 1.2 0.9 0.4 1.2 1.2 1.2 0.9 0.4 0.8 0.9 1.0 0.8 0.4 0.8 0.8 0.8 0.9 0.4 0.5 0.5 0.4 0.4 0.4

1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2

Roof batten fixing / tie-down per the requirements if AS1684 ITI Spec Frame® 12.1 framing has a joint group of JD3 Battens to be installed on thier face

For technical assistance and information on where to buy please call 08 9256 5701 or ewpwa@iti.net.au

itiaustralia.com.au


Turn static files into dynamic content formats.

Create a flipbook
ITI Western Australia - Spec Frame 12.1 - Battens - Brochure v1.0 by itiaustralia - Issuu