International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 09 Issue: 07 | July 2022
p-ISSN: 2395-0072
www.irjet.net
“APPLICATION OF WATER-SOLUBLE POLYMER IN CEMENT CONCRETE MIXES ORDINARY TYPE” Miss. M. S. Kulkarni [1], Miss. A. S. Shinde[2] Miss. K. E. Thorat,[3] Miss. M. N. Khatake[4] Prof. P.R . Admile S B PATIL College of Engineering VANGALI, INDAPUR, Maharashtra [India] (Civil Engineering Department) ---------------------------------------------------------------------***--------------------------------------------------------------------occurrence of cement failure due to the availability of Abstract- The idea of a world without concrete is impossible. Concrete is needed to build strength in structures. Ordinary concrete, which is a mixture of cement, a good amount, a coarse amount of water, needs to be healed to gain strength.
As water becomes increasingly rare on a daily basis, there is an urgent need to conserve water for concrete and construction. Treatment is very necessary to get strength at the same time and the lack of proper treatment can adversely affect the strength and durability of the concrete. Self-adhesive concrete is one type of modern concrete, which cures itself by retaining water (moisture content) in it. The use of SUPER ABSORBENT POLYMER in conventional concrete as a mixture facilitates better water flow and thus the strength of the concrete. As water becomes increasingly rare on a daily basis, there is an urgent need to conduct research on water conservation in concrete and construction.
Key words : Concrete, SAP, Admixture 1. INTRODUCTION SAP absorbs water and converts it into a jelly, then releases it slowly over time. This structure was very useful when it came to watering the plants over time. This study has shown similarities between concrete and vegetation when it comes to the need for continuous water supply. Excess SAP value will leave the concrete with large numbers of voids, which reduces concrete strength and durability. A small amount of SAP, on the other hand, will have a negative impact on concrete performance. The amount of water added to the new concrete is one of the most important factors affecting concrete structures, including durability and strength. Concrete is the soul of the infrastructure. Concrete is needed to build strength in structures. Ordinary concrete, which is a mixture of cement, a good amount, a rough amount of water and water needed to gain the required strength. It is therefore necessary to treat at least 28 days to get the right flow of water and gain the intended energy. Over the past few years, the inner healing of concrete has gained popularity with your gradual development from the laboratory field of practice. Internal process guides The © 2022, IRJET
|
Impact Factor value: 7.529
|
additional internal water that is not part of the mixed water; “INTERNAL MEDICINE” is often referred to as self-healing. Internally treated concrete can be your own self-healing AGENTS. The idea of internally treated agents is to reduce evaporation from concrete, which increases the water retention capacity of concrete. The durability and performance of concrete depend mainly on the development of its microstructure and pore structure, for which curing plays a major role. With water resources becoming scarce in many countries, the use of self-curing admixtures is becoming more and more important. 1.1 OBJECTIVE Determining the compressive strength, flexibility and fragmentation by adding self-adhesive polymer-absorbing agents to varying percentages. Comparing power behavior with conventional concrete. Given the current situation, water conservation should be prioritized over money so with the same economic features of conventional and internally made concrete, we should start using a concrete method that is managed within the construction industry. cement materials (by products) by adding SAP i.e. adhesive concrete 1.2 Scope of Project: Water shortages will be resolved by the concrete you carry. Adhesive concrete that controls the rate and increase of moisture loss from concrete during water installation. Reduce excess water use. 1.3 Limitation It does not work well for standing members like piers, columns etc. It does not help in areas where there is no water where treatment is neglected due to unavailability. Improper treatment for childbirth causes crack growth in the structure. In various cases, fertility cannot cure the structure by hand and the structure remains untreated does not cause energy development.
ISO 9001:2008 Certified Journal
|
Page 626