International Research Journal of Engineering and Technology (IRJET) Volume: 09 Issue: 06 | Jun 2022
www.irjet.net
e-ISSN: 2395-0056 p-ISSN: 2395-0072
VIBRATION ANALYSIS OF BLOCK MAKING MACHINE S Dhanasekar 1, G Deepak 2, K Jeenath Kumar 3, Mr.G.Chandramohan 4 1,2,3UG
Scholar,4Associate Professor of Mechanical Engineering, Sengunthar Engineering College(Autonomous), Tiruchengode, Namakkal, India. --------------------------------------------------------------------***-------------------------------------------------------------------adjusting the mould and tamper assembly to the required Abstract: There have been a succession of building 1,2,3,4 Department
collapses in this country for some time now. The cause for this is due to the poor quality of the construction materials used. The adoption of a block-making machine will aid in the production of more solid, high-quality blocks in a shorter period of time, hence reducing the problem of collapsed buildings in our country. Blocks can usually be moulded by hand, but the importance of using a machine cannot be overstated because it allows for a simpler, faster, and less expensive method of making blocks. Block making machines are available in a variety of designs, styles, shapes, and sizes. No other concept or device has had as much of an impact on production as compute. Computers are used in all engineering fields for calculation, analysis, design, and analysis. Product producers must consider making two products during the Manufacturing phase of the product's lifecycle: the physical products that they have always created and the virtual product, which is information about the physical product. This virtual product has the potential to supply producers with a new source of revenue. The goal of this project was to design, develop, and analyse a block forming machine frame in order to create a more efficient and versatile machine.
1.INTRODUCTION The goal of the proposed project is to create a product that benefits society through its use, reduced energy consumption, and the development of small-scale companies and agriculture.
2.LITERATURE REVIEW Paving block moulding equipment has been designed and produced to match the production parameters, according to Ella Sundari et al. (2020). The maximum number of paving blocks that may be manufactured per day using a paving block moulding tool is 640. Prasad et al. (2017) assist in the development of a product that uses less electricity and labour. The use of coir pith product can prevent plant development during the summer season, in arid terrain, and when there is a mineral deficit in the soil.
size. In addition to the compacting vibrating mechanism, the weight of the machine is taken into account while designing it, as well as the staff required to move it and the convenience of operation. The enhanced machine can produce hollow blocks both inside and outside of halls; all that is required is a levelled concrete floor. It can be made locally and with readily available materials.
Yakubu and Umar (2015) devised a multipurpose brick/block producing machine based on standard design calculations, which they subsequently built using simple fabrication techniques. The equipment was then utilised to manufacture inexpensive and high-quality bricks and blocks in accordance with the African Regional Standard for compressed earth blocks and the Nigerian Building and Road Research Institute (NBRRI) standard. The mould must be converted to a moveable mould that can hold pallets in order to make hollow masonry units. The machine, particularly the feeding and evacuation components, might be automated (mechanism). This will improve its performance as well as the operator's safety. Rufus ogbuka Chime at el. (2016),recommend that the movable parts of this machine like the lifting arm be oiled properly before usage for easy movement since they carry heavy load. That the machine must be properly Installed, balanced before usage to withstand the vibration involved. The pulley, lifting arm and the vibrator should be inspected before usage The machine must be properly cleaned after the normal daily work to be free from sand and cement which can attack the parts and destroy them or the sand also causing friction in the machine. The combination of human creativity with computer technology provides the design efficiency that has made CAD such as popular designtool. CAD has allowed the designer to bypass much of the normal drafting and analysis that was previously required, making the design process flow more smoothly. In fact, software design should be encouraged in our institution of higher learning base on the following facts, long product development, countless trial and error and accountability and limited profitability.
The concrete block producing machine was designed by Yemane Zemicheal and Qi Houjun (2020) to produce four blocks at once. It may also make five blocks at once by © 2022, IRJET
|
Impact Factor value: 7.529
|
ISO 9001:2008 Certified Journal
|
Page 493