International Research Journal of Engineering and Technology (IRJET) Volume: 09 Issue: 05 | May 2022
www.irjet.net
e-ISSN: 2395-0056 p-ISSN: 2395-0072
AUTOMATED BLOOD BANK SYSTEM A.Poornima1, R.Vaishali2, M.Subhiksha3, S.Yalini4 1Assistant
Professor, Department of Electronics and Communication Engineering, Sri Ramakrishna Institute of Technology, Tamil Nadu, India 234UG Student, Department of Electronics and Communication Engineering, Sri Ramakrishna Institute of Technology, Tamil Nadu, India --------------------------------------------------------------------***--------------------------------------------------------------------2.1 System Architecture Abstract -Automated bank System is planned to bring direct communication between blood donors and co jointly the recipient. The aim of this method is to satisfy every blood request by exploitation Arduino UNO, GSM, inside the planned system, information about the donors are collected in nearby hospitals and different blood banks. These data are stored within the information. Persons who are in need of blood have to send their needs and the Arduino reads the necessities. It fetches data of the respected donors from the database and sends SMS to the recipients through GSM module. The main information of the donors will be displayed in digital display.
The basic block diagram indicates that power supply is given to the system to initialize. Arduino UNO contains the data of donors and it gives the donor details for the desired blood request. These details are sent and received by the GSM module.
Key Words: Message, Donor, Recipient, MicroSD card 1. INTRODUCTION Need of blood is drastically increasing. Per year we have a requirement of five million blood units. Even though the technology is developed still we have a tendency to fail to bring blood donors and recipients on the common platform. Accidents cannot t be expected. Now a days, entirely golem app is recruited for blood banks and it takes longer to fill details. It will be accessed only by people who have internet facility, the majority around village areas who don't use smartphones cannot access this and that we cannot fulfill their blood necessities. So, the projected system is designed in such a way to provide higher service to satisfy each request. Arduino UNO is employed to store the donor details like name and mobile number. GSM module is employed to send and receive messages to fulfill the blood needs. In the initial stage, Simulation is performed . Followed by the simulation , hardware is implemented .
Fig -1: Block Diagram
2.2 Working Initially , Simulation is performed . Simulation makes way to evaluate , compare and optimize alternative plans. Simulation plays a significant role when the consequences of the proposed plan cannot be directly and immediately discovered. Through this simulation the conditions can be varied and outcomes are investigated. The simulation for the automated blood bank system was done using Proteus Professional software. Figure 2 shows the simulation of the automated blood bank system.
2. METHODOLOGY The proposed blood bank system is relies on the GSM module and an Arduino micro controller. This system includes an Arduino UNO, GSM module, MicroSD card module, Power supply. Blood requirement is increasing drastically now a days and to meet higher demand service this system is designed and enforced. This system is created to meet each and every blood request to save many lives. By using this system ,donor and recipient gets direct communication through GSM. Arduino contains details of the donor’s name, mobile number and the blood groups. A 5V power supply is given to the proposed system. © 2022, IRJET
|
Impact Factor value: 7.529
|
Fig -2: Simulation of Automated blood bank system
ISO 9001:2008 Certified Journal
|
Page 759