International Research Journal of Engineering and Technology (IRJET) Volume: 09 Issue: 11 | Nov 2022
www.irjet.net
e-ISSN: 2395-0056 p-ISSN: 2395-0072
Simple Road Cleaning System Aryan Koshatwar1, Atharva Patil1, Atharva Paygude1, Atharva Chippa1, Atharva Bande1 1Department
of Mechanical Engineering, Vishwakarma institute of Technology, Pune ---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract - Cleaning is one of the most important necessities
to collect it in a container in the machine. The container can be cleaned by sliding it out of the machine from the back. They also consist of DC motors for the scrubbers and the brooms rotation is done with the help of gears connecting the axel and the broom shaft. Not just the vehicles, but the paper also consists of information on the technological development that has occurred in so many years.
for everyone and should be part of everyday life. The machine can be used for various cleaning applications such as cleaning roads, floors, bus stands, etc. Our projects aim to use low-cost, easy-to-manufacture, and easy-to-use processable materials. It is an alternative to conventional methods of cleaning roads which cause an increase in dust particles in the air which can be bad for respiratory systems, which can be prevented with the use of this machine.
3. Methodology In the literature review, we referred to four research papers, where we found out that there aren’t a lot of machines for small cleaning alleyways and small roads. The machine was designed in solid works and the materials were selected after the designing was done. The road cleaning machine is being made for workers to be able to clean the road easily and effortlessly. The machine is supposed to be used on smaller roads and alleys. It uses two scrubbers and one broom in total to clean the dust and garbage and, stores it in a container at the back of the machine, which can be emptied later.
Key Words: Road Cleaning, Dust Collection, Pollution Control, Environment Cleanliness.
1. INTRODUCTION Urban lifestyle has brought increase in garbage problem in city roads. Land pollution due to household refuses and plastic wastes are increasing and creating unhygienic environment. This results in contaminating water bodies like rivers and ponds and developing a preferable environment for mosquitoes, flies and other insects which are carriers of diseases like dengue, malaria, cholera, etc. Hence, it is important to control land pollution and deal with road garbage. The following paper proposes a solution to support this cause. The Road Cleaning Machine due to its compact size allows it to be used in narrow and cramped spaces. This machine comprises simple mechanical parts and is controlled by Node MCU based basic circuit, having a light weight and cost-efficient design.
3.1 Design
2. Literature Review M Ranjit Kumar and N Kapilan [1] createdFloor cleaning robots are active in various places. These devices require a power source to work and don't seem user friendly. India is experiencing a major power crisis, especially in the summer, and most floor cleaning machines are not being used effectively. A floor cleaning machine was modeled and analyzed using various components within the following projects. Prathmesh Joshi’s [2] report relies on the "Manual platform cleaning machine" that meets the essential needs of cleaning large floors. Heqing Xu [3] talks about different sorts of road cleaning vehicles that are developed to date and also the technological development done in this era. It also sheds light on the challenges while making any road cleaning mechanism. It also consists of the development history of the road cleaning vehicles and information about the present representative products on market. Kaushal Kapadne [4] talks about a road cleaning machine that uses two scrubbers and one broom to center the dust and garbage and a vacuum
© 2022, IRJET
|
Impact Factor value: 7.529
Fig 1. Final Assembly
|
ISO 9001:2008 Certified Journal
|
Page 744