SEALEY Intercars Winter 2025 ENGLISH INTERACTIVE

• Lifting range from a minimum saddle height of just 98mm for low chassis vehicles, to a maximum saddle height of 770mm suitable for SUVs and for extreme off-road vehicles.

• Rocket lift cast iron pump with twin pistons bring the lifting arm into contact with the jacking point in minimal pumps.

• Long 2-piece handle, to reduce operator effort, supplied with foam bumper to protect bodywork.

• Rubber pads fitted to both saddles to prevent damage to the underside of the vehicle’s jacking point.

• Heavy-duty 360° castors and large saddle design for easy positioning under vehicle.

Deep Groove Bearing Puller Set

• Suitable for gearboxes, electric motors, agricultural machinery and general machinery.

• Features reversible jaws allowing internal and external pulling operations.

• Adjustable shims for precise fit into the deep grove bearing.

• Ideal for use with a ratchet or spanner.

• Manufactured from high-grade steel for added strength and durability.

• Min./Max. Spread: 20-120mm, Min./Max. Reach: 30-250mm, Min./Max. Claw Thickness: 9-14mm.

• Supplied in a storage case.

Truck Cabin Shock Absorber Spring Compressor

Allows removal and installation of the cabin spring shock absorber. Many applications including Volvo Trucks FM, FH 500P and 540P. Safety yokes carefully shaped to stop the spring bowing while under compression.

• Spring size: Internal diameter Ø65mm, External diameter Ø89mm.

• Not suitable for use with power tools.

• 1/2"Sq Drive, do not exceed 80Nm torque.

• Always ensure the weight of the cab is correctly supported.

• Compatible with Sealey Model No. RE252 shock absorber wrench, for easy removal of the shock absorber top nut.

Leak Detector Smoke Diagnostic Tool

• Allows the technician to pinpoint all manner of system leaks, including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems.

• High smoke delivery for effective fault diagnosis.

• Fast and easy-to-use, maximising earning potential.

• Features single-button operation and auto-power-off.

• 12V Battery connection.

• Accessories include: Blanking Cone, Fixing Hook, Hose Adaptor, Hose, Filling Bottle.

• Uses mineral oil (not included).

Hydraulic Coil Spring Compressing Station 1500kg Capacity

• 1500kg Capacity foot-operated hydraulic unit.

• Quicker and easier than using ratchet driven spring compressor.

• Plastic coated yokes reduce the risk of spring slippage/damage.

• Suitable for springs from Ø80mm to Ø175mm.

HAND TOOLS

TRX-Star*/Hex/Spline Bit Set 3/8" & 1/2"Sq Drive

• Manufactured from Chrome Vanadium steel.

• Long and short TRX-Star*, spline and hex bits.

• Includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.

• Convenient high-impact storage case presents bits at an angle for easy selection.

• Contents: TRX-Star* Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 and 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 and 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 and 75mm), Drive Adaptors; 3/8"Sq x 10mm Hex, 1/2"Sq x 10mm Hex.

• Spring loaded jaw sets manufactured from hardened and tempered steel.

• Internal and external, in both straight and bent configuration.

• Pliers are fully polished and fitted with non-slip polyfoam grips.

• Min./Max. Circlip Capacity: 19-60mm.

Breaker Bar 1/2"Sq Drive 750mm

• Length: 750mm.

Model No. SEA AK8440

Hammer-Thru Screwdriver, Hex Key & Bit Set 44pc

• Selection of popular sized hammer-thru screwdrivers, hex keys, bit driver and bits.

• Chrome Vanadium steel satin finish hexagonal shafts with shot blasted and magnetized tips.

• Contoured soft grip handles with colour-coding for fast identification.

• Contents: Screwdrivers; Slotted - 3 x 75, 4 x 100, 5 x 100, 6 x 125, 8 x 150mm, Phillips - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, Pozi - #0 x 75, #1 x 75, #2 x 100, #3 x 150mm, TRX-Star* - T25 x 100, T27 x 100, T30 x 125, T40 x 125mm, Bit Driver, 1/4"Hex Bits; TRX-Star* - T7, T8, T9, T10, T15, T20, Hex - 3, 4, 5, 6mm, Hex Keys; Metric - 1.5, 2, 2.5, 3, 4, 5, 5.5, 6mm, Imperial - 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4".

Bi-Hex Deep Impact Socket 1/2"Sq Drive 36mm

• Forged and heat treated Chrome Vanadium steel impact grade bi-hex deep socket, chemically blackened for corrosion resistance.

• Malleable steel material makes the socket suitable for use with either hand ratchet wrenches or air impact wrenches.

Knuckle for AK730 & AK7302 1/2"Sq Drive

*Note: Knuckle joints are not covered by the lifetime guarantee and are treated as consumable items.

• Hardened and tempered Chrome Vanadium steel bar with high chrome finish.

• Long, slim style handle and spring loaded socket retention.

• Fully replaceable knuckle joint*.

Soldering Iron 100W/230V

• Class 1 electrically insulated soldering iron with cool grip handle which stays comfortable during prolonged use.

• Fitted with replaceable soldering tip.

• Includes 1.5m cable with 3-pin plug.

• Complies with Low Voltage Directive and Electromagnetic Compatibility Directives.

Model No.

Model No.

• Knuckle joint for Model No’s AK730 and AK7302 1/2"Sq Drive Breaker Bars.

Coil Spring Compressor 1000kg 2pc

• Hardened carbon steel lead screws and cast jaws.

• Wrapover coil claws for extra safety.

• Suitable for use where space under wheel arch is limited.

• Use with 1/2"Sq drive wrench.

• Maximum Jaw Opening: 244mm.

• Maximum Capacity Per Pair: 1000kg.

4-Way Wheel Brace

• Forged construction with hot forged sockets and baked finish.

• Socket Sizes: 17, 19, 21, 22mm.

Ratchet Crimping Tool Insulated Terminals

Circuit Tester 6-24V

• All steel construction with large comfort grip handles and plate stamped jaws.

• Ratchet action ensures consistent crimping.

• Terminal Suitability: 0.5-1mm², 1.5-2.5mm², 4-6mm².

Disc Type Ethylene Glycol Antifreeze Tester

4-Way Wheel Brace 1/2"Sq

Drive

• Forged construction with polished mirror finish.

• Features three popular size wheel nut sockets and 1/2"Sq drive adaptor for standard sockets.

• Socket Sizes: 17, 19, 21mm.

• Probe tip is covered with protective brass screw cap.

• Tester illuminates when voltage is present.

• Supplied with cable and alligator earth clip.

Mini Hook & Pick Set 4pc

• Checks condition of coolant antifreeze, hot or cold.

• Protection level is indicated by the number of discs floating in the sample.

• Easy-to-read temperature table.

• Tough, virtually unbreakable, plastic body.

• Chrome finish shafts with knurling for fingertip precision.

• Ergonomically styled handles for comfort, grip and accuracy.

• Suitable for removal of bushings, cotter pins, O-rings and seals.

• Contents: Straight, Right Angle, Half-round, Swan Neck.

• Length: 165mm.

Dial Type Ethylene Glycol Antifreeze Tester

• Tests ethylene glycol strength with engine hot or cold.

• Composite body and rubber bulb for workshop durability.

Oil Filter Strap Wrench 3/8" & 1/2"Sq Drive 300mm Capacity

drive.

• May also be used with a 21mm(13/16") spanner.

• Extra-wide Nylon webbing strap suitable for filters up to Ø300mm.

• Use with ratchet wrench.

VEHICLE SERVICE TOOLS

• Suitable for removing oil drain plugs from engines, gearboxes and back axles.

• Features T-handle oil drain plug key for quick operation.

• Manufactured from heat treated and hardened steel.

• Contents: 3/8"Sq Drive Extension Bars; 75, 150mm, 3/8"Sq Drive 200mm Sliding T-Bar, 3/8"Sq Drive Square; 7, 8, 10, 11, 12, 13, 14, 5/16", 3/8", 3/8"Sq Drive Hex; 8, 9, 10, 12, 13, 14, 17mm, Triangle; 10mm (PSA) Security Spline; M16, Square Female; 10mm, TRX-Star*; T45, T-Handle Oil Drain Plug Key, 3-piece Special parts for Ford/Land Rover/BMW/VW/Audi, 1-piece Special Socket for Japanese Cars.

Spark Plug Socket with Magnetic Retainer 3/8"Sq Drive 12-Point 14mm

• Designed for use where plug clearance is tight.

• Standard depth, thin wall, 12-point 3/8"Sq drive 14mm socket with magnetic insert to retain spark plug.

• Magnetic insert to retain spark plug.

• Application: BMW.

Crankshaft Rotator for DAF Euro 5 & 6

• Manufactured from Chrome Vanadium steel with black phosphate finish.

• Designed to rotate crankshaft via flywheel ring gear on DAF Euro 5 and 6 commercial vehicles.

• For lorries equipped with a 6-cylinder (Euro 5 & 6) engine. DAF XF 105 (Euro 5). Engine codes: MX 300, MX 340, MX 375.

Model No. SEA CV041

Axle Nut Socket for Mercedes 3/4"Sq Drive 95-115mm

• Drop-forged Chrome Molybdenum steel, 6-stud impact socket.

• Designed for the removal of rear and trailer axle nuts on MAN/Mercedes commercial vehicles.

• Black phosphate finish for added corrosion resistance.

• 3/4"Sq drive.

Model No. SEA CV057

Flexi-Head Flare Nut Diesel Injection Wrench Set 3/8"Sq Drive 6pc

• 3/8"Sq Drive 6-point socket wrenches suitable for fuel injector lines on most diesel engines.

• Flare nut spanner heads manufactured from heat treated Chrome Molybdenum steel, with Chrome Vanadium steel shafts.

• Blackened finish for corrosion resistance.

• 180° Flexible head is ideal for space limited applications.

• Flare type spanner head suitable for fuel injector connections.

• Large size marking for clear identification of sizes.

• Contents: 12 x 120, 14 x 130, 16 x 140, 17 x 140, 18 x 140, 19 x 140mm.

• Radiator coupler designed for the draining and coolant system fitted to Scania Euro trucks.

• Knurled connector for secure grip.

• Applications: Scania (Euro 6).

• OEM Tool: 2437252/99301

Axle Nut Socket BPW 3/4"Sq 110mm

• Black phosphate finish for added corrosion resistance.

• Drop-forged Chrome Molybdenum steel for strength and durability.

• 6-Point, high impact socket designed for the removal of BPW axle nuts. 3/4"Sq Drive, 110mm.

Model No.

Scania Transmission Shaft Retaining Nut Socket 3/4"Sq Drive 72mm

• Manufactured from hardened and tempered Chrome Molybdenum steel for strength and durability.

• Black phosphate finish for added corrosion resistance.

• 4-Stud transmission socket designed for use on retaining nut on Scania transmission main shaft.

• Applications: Scania L-, P-, G-, R-, and S-T Series.

• To remove or fit OEM nuts: 2094066, 1461414, 1114622.

• 3/4"Sq Drive 72mm.

Rear Wheel ROR Meritor Axle Socket 1"Sq Drive 83mm

• Drop-forged Chrome Molybdenum steel 8 point impact socket.

• Designed for the removal of ROR trailer rear wheel nut with Meritor axle.

• Black Phosphate finish for added corrosion resistance. 1"Sq Drive.

Groove Axle Nut Socket for MAN/Mercedes 3/4"Sq Drive 6-Stud 101-110mm

• Manufactured from drop-forged Chrome Molybdenum steel.

• 6-Stud impact socket.

• Designed for the removal and refitting of axle nut found on MAN TGA and Mercedes trucks.

• Size: 101-110mm.

Heavy-Duty Tyre Inflator/Mini Air Compressor 12V

• Installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.

• Composite body with simple control valve, works from standard workshop air supply.

• While fitting boot the tool can be removed from the air line when pressurized (arms open) and will maintain pressure until the release button is pressed.

• Suitable for cars and light commercial vans.

• Stainless steel, single ear, low profile CVJ boot clamps. Manufactured to DIN 1.4301.

Truck Cabin Shock Absorber Wrench

• Allows removal and installation of the cabin spring shock absorber.

• The inner socket holds the shock absorber piston, while the outer socket undoes the shock absorber top nut.

• Many applications including Volvo Trucks FM, FH 500P and 540P.

• Size: Outer socket 18mm. Inner slotted socket 10 x 7.5mm.

• Always ensure the weight of the cab is correctly supported.

• Compatible with Sealey Model No. RE251 Shock Absorber Spring Compressor, for easy removal of the shock absorber top nut.

• Air Delivery: 25L/min.

• Typical Inflation Time: 0-30psi in 139sec (175/70/R13).

• 1.5m Air hose with quick release coupling and 3m power cord with accessory plug.

• Suitable for inflating tyres on cars.

• Supplied in a storage bag with accessory kit including ball needle and adaptors for inflatables.

• High power, steel framed foot pump with two Ø50 x 120mm steel barrels.

• Dial type pressure gauge with rotating bezel.

• Gauge calibrated in psi and bar and ranging from 0-100psi(0-7bar).

• Fitted with 610mm flexible pressure hose with locking connector.

• Supplied with accessory for inflating items such as boats, air beds and balls etc.

CVJ Installation Kit

VS705 Composite cone with steel core which enables the CV boot to be easily pushed over the CV joint in situ using VS701 without splitting the drive train.

• CV96 Universal CVJ boot is manufactured from high quality neoprene material.

• Supplied with fitting kit including clips, grease sachet and cutting guide.

• VS701 Length: 442mm.

• Maximum CVJ Diameter: Ø122mm.

8-Function Digital Multimeter with Thermocouple

• Heavy-duty general-purpose multimeter with clear and easy-to-read LCD display.

• Features data-hold function, temperature probe and diode test facility.

• Supplied with full set of leads and probes.

• Measures: AC and DC Voltage, DC Current, Resistance, Temperature, Audible Continuity, Diode/Transistor Verification Mode.

Universal Stretch CVJ Boot EU 56-116mm

• Universal CVJ boot made from high quality neoprene material suitable for use with air operated boot installation tools.

• Supplied with fitting kit including clips and cutting guide.

• Suitable for most car and car-derived van applications.

• Fitted with 4.8m cable allowing access to the rear of the vehicle.

• Just some of the tests, which can be done quickly and efficiently on systems from 6V up to 24V:

- Cooling fan motors

- Fuel pumps

- Window/Sunroof motors

- Relays and Lamps

- Wiper motors Auto Probe

VEHICLE SERVICE TOOLS

Trim & Upholstery Tool Set 5pc

Feeler Gauge 13 Blade

• Tools designed to simplify trim and trim stud removal.

• Manufactured from resilient plastic to minimize panel damage and marking.

Tyre Inflator with Clip-On Connector

• Die-cast body and dial type gauge with rubber protector.

• Fitted with single clip-on connector.

• Range: 0-10bar(0-145psi).

• 1/4"BSP Air inlet.

External TRX-P* Socket Set 19pc

• External TRX-P* sockets for added torque, found on many specialist vehicle applications including automatic gearboxes and head bolts.

• Set includes 1/2"Sq drive 5-point EP8.8 socket, specially designed for battery pack removal on Tesla.

• Drop-forged and heat treated Chrome Vanadium steel impact-grade steel.

• Chemically blackened phosphate finish for corrosion resistance.

• Contents: 1/4"Sq Drive; EP4, 5, 6, 7, 8, 3/8"Sq Drive; EP10, 11, 12, 14, 16, 1/2"Sq Drive; EP18, 20, 22, 24, 26, 28, 30, 32.

Thread Inserts

• Metric graduated 13 blade feeler gauge.

• Sizes: 0.05 to 1mm.

• Blade dimensions 95 x 10mm.

• Anodized Chrome Molybdenum 1/2"Sq drive sockets.

• Suitable for use with impact tools.

• Features nylon sleeve and insert to prevent damage to alloy wheels.

• Colour-coded sockets for easier size selection.

• Comprises standard 17, 19, 21mm sockets.

Xenon Timing Light

• Xenon timing light with inductive impulse pick-up, ensuring accurate ignition timing.

• Impact-resistant composite case housing.

• 8000rpm Maximum.

• Pistol grip with trigger control for easy operation.

• Supplied with 1.2m coiled 12V power lead and inductive coupler.

• For 12V ignition systems only.

Tyre Valve Core Tool

• Used for removal and installation of the core from a wheel valve.

• Features easy grip handle and ideal for the busy workshop.

• Suitable for motorcycles, cars and commercial vehicles.

Digital Tyre Pressure & Tread Depth Gauge

• Tyre pressure gauge with integral tread depth gauge and worklight.

• Push-button operation with backlit LED display for tyre pressure.

• Read-out available in bar, psi, kg/cm² or kPa.

• Integral tread depth gauge reads up to 20mm.

• Auto-power-off.

2-in-1 Tyre Pressure Gauge & Pen Light

Twin Connector Tyre Pressure Gauge

• Dial type pressure gauge that can read up to 15bar(220psi).

• Metal body, long reach twin connector and high range scale.

• Arm Length: 120mm.

• Compatible with both cars and commercial vehicles.

• Digital tyre pressure gauge displayed in bar, psi, kPa and kg/cm².

• Bright LCD backlit display, ideal for reading the screen in low light conditions.

Main side light has 2W COB LED producing180 lumens (worklight)/90 lumens (low light).

Top Light 1W SMD LED producing 80 lumens.

3.7V Rechargeable 500mAh Lithium-ion battery with a USB Type-C charging cable (supplied).

Base and side magnets for easy hands-free use.

Universal Clutch Alignment Tool

• Nylon components with steel main shaft.

• Fits 90% of cars and light vans up to 5 Tonne gross (not suitable for vehicles with double plate clutches).

• Supplied with three different sized expanding collets.

Brake & Clutch Bleeder Vacuum Type 1L

• The simple way to bleed hydraulic brakes.

• One-person operation.

• No special reservoir caps required.

Model No.

VS010

• Uses regular 90psi air supply.

• Supplied with complete operating instructions.

Model No.

Combustion Leak Detector Fluid 250ml

• Suitable for use with Model No’s VS0061 and VS0062 Combustion Leak Detectors and other leading brands of detector. Fluid changes colour on detection of CO2 gas.

M12 Wheel Bearing Hub Spline Socket Bits for VAG 2pc

• Designed to remove and install the front wheel bearing hub assembly whilst leaving the drive shaft in situ.

• Size: M12 1/2"Sq Drive 120 and 78mm.

• Application: VW, Audi, SEAT and Skoda.

• Manufactured from hard-wearing Chrome Molybdenum steel.

• Black phosphate finish for added corrosion resistance.

Brake Bleeder Set with Container

• Composite collection bottle with magnetic locating pad.

• Capacity: 150ml.

• Supplied with tube and connectors.

VEHICLE SERVICE TOOLS

Automatic Brake & Clutch Bleeder

• Fast and easy bleeding of brakes including ABS systems and clutch using air from the tyre.

• Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage.

Adaptors included: Ø25mm Cap and Seal for Lockheed Systems, Ø27mm Cap and Seal for VAG, Ø44/45mm Cap and 2 Seals(Ø44mm thin/Ø45mm Thick) for Metal Girling and ATE Systems, Ø46mm Cap and Seal for some Girling Systems.

Capacity 500ml.

Metal Spring Type Hose Pinch Tool for Brake/Fuel

Hoses

• Completely or partially seals flexible brake, fuel and vacuum lines.

• Smooth rounded jaw edges prevent damage to internal hose reinforcement.

• Quick and simple-to-use.

• All steel construction with sliding lock collar.

Air Conditioning & Fuel Line Disconnection Set 7pc

• Automotive fuel line and air conditioning hose disconnection set.

• Suitable for a wide variety of vehicles with quick disconnect couplings.

• Compatible with low profile fuel lines on a range of Ford, Vauxhall/Opel, Mazda and Chrysler.

• Designed for automotive fuel, A/C and transmission cooler lines. Made from a tough durable plastic that is resistant to fuel and solvents.

Offset handles are ideal to access fittings in tight spaces.

75mm Triple Leg Cylinder Hone 50-175mm Medium Stones

• For removal of heat glaze and carbon deposits on cylinder walls.

• Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm.

• Range collar adjusts arm travel between Ø50 and Ø100mm or Ø100 and Ø175mm.

• Adjustable spring tension gives finish control.

• Suitable for push-back and wind-back brake pistons.

• Includes left and right-handed thrust bolt assemblies, reaction plate, hex bits and adaptors and includes the 3-pin VAG adaptor.

Model No.

VS162

• Designed for use on hydraulic braking systems.

• Adjusts the clearance between the brake drum and shoe.

• May be used to lever the brake shoe to adjust the mechanical adjuster or through slots in the backing plate to turn the star wheel type adjuster.

• Suitable for cars and light commercials.

Vehicle Health Check Kit

• Contains essential tools for carrying out vehicle health checks.

• Suitable for checking brake pad and disc wear, brake fluid quality, tyre tread depth, antifreeze quality, air con temperature.

• Consists of Sealey Model No’s AK410, AK4123, VS0274, VS0560, VS0561, VS059, VS058, VS906, refer to individual model numbers for full specification.

• Supplied in storage case with removable EVA foam insert.

Remote Action Hose Clip Tool

• Long reach tool designed for awkwardly positioned tag-type hose clips.

• Flexible cable and compact head help operation in confined spaces.

• Features ratchet action and vinyl dipped handles for comfort and close control.

• Length: 630mm.

Real-time readings.

Units feature a 2.8" backlit display and auto-power-off

Reads pressure units in psi, bar, kg/cm”.

Range: 0-435psi(0-30 bar).

Diesel Injector Puller for Ford EcoBlue 2.0L

• Suitable for Ford EcoBlue 2.0L engines.

• Designed for the extraction of seized injectors. This method of extraction will damage the injector beyond repair and will require replacement.

• Equivalent to OEM 303-1690, 303-1690-01.

Suspension Split Hub Spreader

• Easy removal and fitting of suspension struts whilst leaving the hub in situ on the vehicle.

• 14mm Maximum spread reduces the risk of damage to hubs when removing the suspension strut.

• 17mm Nut, to be used with hand tools only.

• Can be used on most makes of passenger and light commercial vehicles.

Fuel Injector Puller & Service Kit for VAG 24pc

• Applications: VAG Group, Volkswagen, Audi, Skoda, Seat.

• For petrol and diesel injectors and injector seals on 1.4SDi /TDi, 1.9D/SF/TDi/TDi(PD), 2.0TDi/TDi(PD), 2.8TDi(PD) and FSi injectors found on VAG engines.

• Contents: Large Injector Remover, 2-Leg Injector Remover, Injector Remover Adaptor (x3), Slide Hammer, 300mm Slide Hammer Extension Bar, 110mm Slide Hammer Extension Bar, Cleaning Brush, Teflon® Ring Assembly Cone, Teflon® Ring Assembly Sleeve, Teflon® Ring Calibration Sleeve (x2), Injector Installer, Teflon® Ring Spacer Sleeve, Support Ring Locking Plate, Support Ring Assembly Cone, Support Ring Calibration Sleeve, Injector Remover Bridge, Support Ring Calibration Sleeve, Offset Adaptor, Hook Adaptor, Adaptors; 17, 22mm.

• Equivalent OEM No’s: T10133, T10163.

Suspension Split Hub & Ball Joint Spreader

• Designed for the removal and fitting of suspension struts whilst leaving the hub in the vehicle.

• Keeps suspension hubs separate and open.

• Allows for use on both larger upper split hubs and lower ball joint split joints without risk of damage.

• Manufactured from high quality steel for strength and durability.

• Max. Torque: 13Nm (for use with hand tools only).

• Suitable for use on VW, Audi, Ford and BMW.

• Maximum Outer Spread: 15mm, Maximum Cut-Out Spread: 12mm.

VEHICLE SERVICE TOOLS

Electrical Disconnect Pliers

• Easily removes electrical connectors found on mass air flow sensors, fuel injectors, ignition coils and other applications.

• Hooked end squeezes together to remove the connector from the sensor without damage.

• Double dipped non-slip foam handle for comfort and grip.

• Low profile design for increased access in space restricted applications.

• Fully polished steel jaw for increased strength and durability.

• Allows for one-handed operation.

Slide Hammer & G-Hook Set 3pc

• Designed to release the control arms from the hub assemblies. It can also carry out straightening work on vehicle bodywork.

• Provides ample pulling force on seized joints.

• 460mm Extension bar.

• Manufactured from C45 carbon steel, which is heat treated for strength and durability.

• G-Hook Internal Size: 110 x 90mm.

• Compatible with Sealey Model No. PS983 Slide Hammer Puller Set.

• Ideal for repairing sump, gearbox and differential drain plug threads.

Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer.

Tap Size: M15 x 1.5mm.

• For use on VAG vehicles fitted with 7-speed DSG gearboxes.

Electrical Disconnect Pliers

Model No. SEA VS3817

• Easily removes electrical connectors found on mass air flow sensors, fuel injectors, ignition coils and other applications.

• Hooked-end design compresses for easy, damage-free removal of push tab electrical connectors.

• Non-slip handle for comfort and grip.

• Allows for increased access in space restricted applications.

• Overall length: 260mm.

Heavy-Duty G-Hook for Slide Hammer

Designed to release the control arms from the hub assemblies. It can also carry out straightening work on vehicle bodywork. Manufactured from C45 carbon steel, which is heat treated for strength and durability.

• G-Hook internal size: 110 x 90mm.

• Compatible with Sealey Model No. PS983 Slide Hammer Puller Set.

Model No. SEA VS3818

Drain Plug Thread Repair Set

and

• Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied).

Set is suitable for the most popular threads used on cars and light commercial vehicles.

Tap Sizes: M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5mm.

DSG Transmission Oil Filler Adaptor for VAG

• Oil filling pipe for VAG DSG transmission that allows simple filling of the gearbox.

• Aluminium connectors that are hard-wearing and robust.

DSG Gearbox ATF Adaptor for VAG 7-Speed Model No.

• M24 x 1.5mm Male thread with a 1.5m durable plastic hose and an M37.5 x 3mm female thread adaptor which attaches to the oil container.

• OEM equivalent tool VAS6617/12.

• Designed to work with Sealey VS7009 gear oil dispensing tool.

Model No.

• Knurled edges for superior grip when attaching to the gearbox even with oily hands.

• OEM Tool: VAS6262A.

• Comprehensive set of oil filter cap wrenches covering a range of vehicle applications.

• Crowned tops provide extra leverage points for removing stubborn oil filter housing caps.

• Aluminium alloy material minimises risk of damage to filter housing.

Extended Reach Ratchet Action Auxiliary Belt Tension Tool Kit

• Designed for removing and installing auxiliary belts, releasing and positioning tension for idler pulleys and belts.

• Includes 150mm multi-positional extension handle for improved access. Suitable for a wide range of spring-loaded tensioner applications.

Slim design ratchet for access in space limited applications.

Contents: 440mm Ratchet Wrench, 150mm Extension Handle, Crows Foot Spanners; 13, 14, 15mm, 6-Point Sockets; 13, 14, 15, 16, 18, 19mm, Adaptors; 3/8"Sq, 1/2"Sq Drive.

Brake & Clutch Bleeding System 2.5L

• One-person brake and clutch bleeding the professional way. Bleeding requires no external power source - simply fill and pump.

• Reservoir holds 2.5L of hydraulic fluid - flush the entire system with one fill, without the risk of running the reservoir dry.

• Pressure range makes unit suitable for use with ABS systems.

• Fitted with Ø45mm cap with 90° angled connector which is suitable for most European models.

• For alternative Brake & Clutch Bleeder Caps, order Model No’s VS820SA, VS820UA, VS0204B, VS0204T, VS0204C4 and VS0204C.

•

•

•

• Ideal for testing automotive air conditioning output.

• Powered by 1.5V battery (supplied).

• Crowned top provides extra leverage points for removing stubborn oil filter housing caps.

• Aluminium alloy material minimizes risk of damage to filter housing.

Dial Bore Gauge 50-160mm

• Precision mechanism with Ø55mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality.

Measuring Range: 50-160mm.

Will indicate the deviation from set size by up to 3mm with an accuracy of 0.01mm.

Probe body, dial indicator, anvils and spacer rings are also included.

• Quality 28mm EVA mats ideal for the busy mechanic.

• Oil and water-resistant.

• Set comprises full length and kneeler mats.

• For use on workshop floors when working on wheels, brakes, tyres and exhausts.

• Also ideal for roadside repairs.

• Sizes (L x W x D): Kneeler; 450 x 215 x 28mm, Full-length; 980 x 380 x 28mm.

VEHICLE SERVICE TOOLS/LUBRICATION

Windscreen Cutting Wire

• Braided and square stainless steel wire suitable for use with wire grips.

• Use a sawing action to cut through the urethane bond.

• The square profile has four cutting edges enabling a fast and easy cut, even in cold conditions.

• Length: 22.5m.

• Designed for cleaning carbon deposits found on intake ports, valves and intake manifold, to ensure engine efficiency.

• Natural properties of walnut media provide thorough clean of engine inlet components without causing damage.

• Allows for walnut media to be sprayed and recovered simultaneously.

• Built-in filter to separate recovered walnut media and carbon deposits.

• Back-mounted storage box for compact storage of adaptors and accessories.

• Supplied with 23 adaptors to suit most vehicles applications and 5kg of walnut media.

Tyre Lever Set 4pc

• Carbon steel with hardened and tempered ends.

• Hook and taper ends.

• Lengths: 300, 400, 500, 600mm.

Self-Priming Lever Pump

12V & 230V Electric Drum

• Steel barrelled, self-priming lever pump.

• Supplied with 2"BSP adaptor and dip tube suitable for 25-205L drums.

• Suitable for oils, antifreeze, degreasants and other non-corrosive fluids.

• Delivers approximately 500ml per stroke.

• Polyethylene funnels resistant to oil, fuel and some acids.

Fitted with built-in fuse for protection, with a silenced motor keeping noise to a minimum. Telescopic suction tube features a stainless steel filter at the base of the tube.

• Convenient holder for storing the dispensing nozzle.

• Includes 230V mains adaptor and 12V battery clips allowing user to operate unit with whichever supply is available.

• Supplied with a 2"BSP adaptor, 2m hose and manual dispensing nozzle with spout.

• Suitable for diesel, water, AdBlue®, antifreeze, windscreen fluid, mild detergents, agricultural chemicals and light oils.

• Single action composite bodied suction tube with T-bar type plunger.

• Ideal for use on vehicles and machinery for removing oil from gearboxes and differentials.

• Supplied with 300mm transparent flexible suction hose with Ø10mm bore.

Low Profile Oil Drip Trays

• Manufactured from hard-wearing recycled polypropylene.

• These have a broad appeal to both the classic car user and general mechanic.

• Purpose-made for the recovery of oil and fluids, these drip trays can be left under most vehicles due to the low profile design.

• Ideal for use over prolonged periods of time, catching any drips that may occur whilst in storage or in the workshop.

Oil Container with Flexible Spout 5L Black Lid

Tough polyethylene jug resistant to oil and most acids.

• Ideal for tight spaces where a funnel is not practical.

• Removable flexible spout.

• Screw cap and lid enables jug to be used as a container, to ensure safer handling of liquid, preventing spillages

Oil Can 180ml

• Metal can with flexible spout for directional control.

• Trigger operated action for high pressure oil spray.

• Capacity: 180ml.

• Square design and tapered spout fits into most engine filling holes.

• Manufactured from durable polypropylene material.

• Rectangular aperture (180 x 100 x 145mm) to accommodate up-ended containers.

Metal Oil Can with Flexible Spout 500ml

• Metal construction with flexible spout and thumb operation lever action.

• 500ml Capacity.

• Spring loaded pressure release.

• Ideal for lubricating bearings, locks, chains, and other moving parts.

• Includes a set of five chisels and a spare chisel retaining spring.

•

• Air Inlet Size: 1/4"BSP.

• Air Supply: 90psi - 4cfm.

• Weight: 1.2kg.

Quick Release Positive-Negative Battery Clamps - Pair

• Copper-zinc plated steel and brass.

• RoHS Compliant.

• Cable Size: 25mm².

• Post Size (Positive/Negative): Ø19mm/Ø17.5mm.

• Blue and red.

• Enables quick release.

• Die-cast metal body with moulded handle and hanging point.

• Palm type gun with thumb trigger control.

• Supplied with jet and safety nozzle.

• Maximum Operating Pressure: 110psi.

POWER TOOLS/CONSUMABLES

Headlight Restoration Kit

• 3-Stage headlight restoration kit designed to eliminate the worst cases of headlight degradation, yellowing, oxidation and scratches.

• Includes everything needed to restore the cloudiest lenses.

• Get great results on most plastic lenses, such as tail lights, trailers, boat windows, helmet visors, motorcycle windscreens, snowmobiles and more.

• Improves visibility and safety.

• One kit is intended to restore two headlight lenses.

• Contents: Sanding Discs; P800 (x2), P1200 (x2), P2000 (x2), M10 Male to Female Adaptor, 40g Polishing Paste (x2), 3ml Protection Liquid (x2), 3m x 20mm Masking Tape, Backing Pad M10 Female Thread, Orange Sponge Disc, Cleaning Cloth.

Windscreen Repair Kit

• Simple step-by-step process and a 30 minute curing time.

• Tough resin formula fills chips and cracks to prevent the damage from spreading.

• Suitable for screen chips up to Ø25mm diameter and cracks up to 300mm long.

• Improves visibility and safety.

• Contents: Push Pin, Clean Cloth, Adhesive Seal (x3), Black O-Ring (x2), Pedestal, Razor Blade, Repair Resin, Injector, Curing Film (x5).

PVC Insulating Tape 19mm x 20m, Black - Pack of 10

• RoHS Compliant insulating tape.

• Thickness: 0.15mm.

• Elongation: 125%.

• Tensile Strength: 22N/100mm. Temperature Rating: -18°C to 150°C. Self-extinguishing.

Automotive Blade Fuse Assortments

Leak Detector Oil 500ml

Cylindrical Front End Cut Tungsten Carbide Rotary Burr 10mm

• Ø10mm Burr made from Tungsten Carbide.

• Cylindrical front end No. 6 cut (universal).

• For use on soft and hard metals, including welded seams.

• Supplied in a plastic storage case.

75mm Crimped Wire Cup Brush with 6mm Shaft

• Suitable for use with power drills.

• Ø6mm Shaft.

• Crimped brassed steel filaments add extra rigidity and cleaning power.

65mm Twist Knot Wire Cup Brush M14 x 2mm

THEUK

THEUK MADE IN ITALY MADE IN ITALY

• Using leak detection oil allows the technician to pinpoint all manner of system leaks including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems.

• Does not damage vehicle components during use. Leak detector oil can be poured directly into the smoke diagnostic tool.

• Suitable for use with power tools up to the maximum rated rpm. Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.

Snap-Off Blade - Pack of 10

• Suitable for use with Sealey and other brands of retractable snap-off knives.

• Compatible with Model No. AK86R.

Bonded Seal (Dowty Seal) Assortment 88pc

• Bonded seals (Dowty Seals) assortment.

• Contents (Approximate Quantity): M18 (x8), M20 (x5), M22 (x5), M24 (x5), M10 (x20), M12 (x15), M14 (x15), M16 (x15).

• Diesel injector copper washers assortment.

Model No.

SEA AB010DS

Lead-Free Soldering Wire Dispenser Tube

• Tube of flux-cored lead-free wire for general-purpose soldering.

• Size: 10g.

Diesel Engine Timing Tool Kit for VAG, Ford, Dodge, Mitsubishi 1.2D/1.4D/1.6D/1.9D/2.0D

TDi Common Rail - Belt Drive

• For VAG 1.4D, 1.9D, 2.0D TDi PD (Pumpe Duse) and 1.2D, 1.6D, 1.9D, 2.0D CR (Common Rail) engines with Mechanical (Friction Dampened) Belt Tensioner.

• Kit includes crankshaft locking tools (oval and round gears), plus camshaft and tensioner locking pins.

Model No. SEA VSE2358

• Composite stocked brush set with hanging holes.

• Steel, nylon and brass filled heads.

• Suitable for cleaning spark plugs and smaller engineering components.

Rubber O-Ring Air Conditioning Assortment 225pc

Diesel Injector Copper Washer Assortment 250pc Model No.

• Contents: (Approximate Quantity): ID x OD x Thickness; Ø6 x Ø10 x 1 (x20), 10 x 13.5 x 1 (x20), 10 x 20 x 1 (x20), 12 x 16 x 1.5 (x20), 14 x 18 x 1.5 (x20), 16 x 20 x 1.5 (x15), 21 x 25 x 1 (x10), 8 x 11.5 x 1 (x20), 10 x 14 x 1 (x20), 10 x 20 x 2 (x20), 12 x 18 x 1.5 (x20), 14 x 20 x 1.5 (x20), 17 x 21 x 1.5 (x15), 22 x 27 x 1mm (x10).

Model No.

SEA AB027CW

Safety Spectacles with Adjustable Arms

• BS EN 166/F - Wraparound, clear, anti-scratch, polycarbonate lenses.

• Adjustable length nylon arms for a snug fit.

Diesel Engine Timing Tool Kit for Dacia dCi, Nissan 1.5dC, Renault, Suzuki DDiS Belt Drive

Essential Tools for timing belt replacement on Renault/Nissan 1.5D dCi diesels.

• Covers engine codes K9K.

• These engines are also fitted in Suzuki and Dacia models.

• Made from HNBR.

• Designed for use with Freon R134a and R1234YF gas making them suitable for automotive air conditioning units and many other applications. Contents: (Approximate Quantity) ID x Thickness; Ø3 x 1, 4 x 1, 4.5 x 2, 5 x 2, 6 x 2, 6 x 2.5, 6 x 3, 7 x 2, 8 x

Digital Vernier Caliper 0-150mm(0-6")

• 11mm LCD display.

• Hardened and tempered stainless steel with satin finish. Metric and Imperial readings with conversion between the two. Zero setting control for comparative measurement. Supplied in storage case.

Petrol Engine Timing Tool Kit for Ford, Mazda, Volvo 1.25/1.4/1.6/1.8/2.0/2.3 16v Duratec - Belt/Chain Drive

• Composite stocked brush set with contoured soft grip handles and hanging holes.

• Stainless steel, nylon and brass filled heads suitable for cleaning spark plugs and smaller engineering components.

• Covers the complete range of Ford Duratec engines 1.25, 1.4, 1.6, 1.8, 2.0, 2.3 16v in both belt and chain drive variants.

Wire Brush Brassed Steel with Plastic Handle

• Brassed steel filaments.

• Curved, folded, alloy stock with composite handle.

Short Chassis Trolley Jack 2 Tonne

• Min./Max. Saddle Height: 130/330mm.

• Chassis Length: 450mm.

• Steel chassis with welded castor supports and one-piece hydraulic unit.

• Fitted with overload valve and finger cover for extra safety.

• Suitable for the hobby user or as an emergency mobile jack.

• Includes one-piece pumping handle and carry handle.

Petrol Engine Belt Replacement & Chain in Head Service Set for VAG 1.8/1.8T - Belt Drive

• Suitable for belt tensioning 1.8 and 1.8 Turbo twin camshaft engines.

• These belt drive engines also have a chain connecting the two camshafts.

• Includes a belt tensioner bolt, belt tensioner pin and chain tensioner retainer.

Tablet Video Borescope 3.9mm Camera

• Large 110mm LCD screen with a resolution up to 1080p full HD for video recording, playback and still images.

• Tablet design makes the image incredibly clear but also very portable.

• Features controls for light intensity, digital zoom and image rotation.

• Waterproof probe pod with IP67 rating.

• Powered by 2600mAh rechargeable battery with 5hrs working time (USB Charging cable supplied).

• SD card can be installed to achieve file storage (not included).

• Kit includes 45° mirror, hook and magnetic pick-up.

• Cable Length: 2m.

• These units easily fit in a glove box or backpack and benefits from being compact and lightweight. Powered by lithium-ion technology and fully protected against short circuit, overload and reverse polarity. Integral LED flashlight.

Waterproof to IP66 or IP67 rating, depending on models. Supplied in a sturdy hard-shell zip-up case.