C L A M P R I T E
Belleville springs provide the only force that holds tools in the spindle while cutting, and they are often the first to wear out on a CNC Machining Center.
Drawbars can have over 140 Belleville springs in the stack. Just the slightest wear, or one broken spring will have a huge effect on clamping force, causing chatter, bad finishes, reduced cutter life, and scrapped parts.
Left unchecked, a tool may eventually pull out of th spindle during a cut and damage the spindle, cutter, arbor, and fixture.
Machines are never the same after a crash.
Problems with repeatability, bad finishes, and short cutter life can be frustrating and difficult to diagnose. Up in the spindle and out of sight, drawbars seldom get the attention they deserve. To check it requires a special tool designed just for that purpose. Previously these tools cost many thousands of dollars, but now you can check your spindle for a fraction of that cost.
The Clamprite Gage simulates a tool in the spindle, and checks the drawbar in less than a minute. It has no batteries, clumsy cables, or delicate electronics to burn out. The pressure gauge reads directly in pounds/force, so there are no conversions or calculations to perform.
Thousands of shops in the U.S. and around the world use the Clamprite Gage. Customers often say it paid for itself the first time they used it.
Find out if
Clamprite Gage Kits provide the most economical method of checking the drawbar force of your machine. Kits are furnished in a foam fitted metal tool box and includes the gage head, a spindle adapter, and an internal transfer screw coupling (not shown) that accepts all pull studs.
The universal gage head accepts all sizes and types of spindle adapters, incl. CAT, BT, ISO, HSK, CAPTO, and others. Select your kit by spindle type and maximum drawbar force you will be testing. Additional adapters sold separately.
CG3K
Clamprite Gage Kits
FRIDAY, DECEMBER 12TH AT 10 AM Located at 11320 Baco Rd. • Meadville, PA 16335 2/10 miles west of Walmart off of Rt. 322
Cnc Equipment:
Viewing: Thursday December 11th • 3:00 PM - 5:00 PM
• 2005 FADAL VMC 15 VERTICAL MILL w/ 21 Tool Changer & 7,500 RPM Spindle In Good Condition
• 1996 FADAL 4020 HT VERTICAL MILL w/21 Tool Changer & 10,000 RPM Spindle In Good Condition
• 1996 FADAL 906 WMC HT VERTICAL MILL w/ 4th Axis, 21 Tool Changer & 10,000 Rpm Spindle In Good Condition
• 2005 MAZAK NEXUS 510C VERTICAL MILL w/ 30 Tool Changer & 41” X 28” Table In Good Condition
• 1999 MAZAK FJV-200 VERTICAL MILL w/ 30 Tool Changer, 10,000 Rpm Spindle & 41”X28” Table In Good Condition
• MORI-SEIKI AL-2 LATHE w/ 8 Tool Changer & 6” 3 Jaw Chuck In Good Condition
• 2008 MAZAK QUICK TURN NEXUS QTN 200 LATHE w/12 Tool Changer, Tailstock, Tool Spotter, 8” 3 Jaw Chuck & 5,000 RPM Spindle In Good Condition
• 2011 ROMI C-420 LATHE 8 Tool Changer, Tailstock, 17” Swing, 40” Between Centers & 10” 3 Jaw Chuck In Good Condition
• 1997 CHARMILLES ROBOFIL 290 Wire EDM In Good Condition. Manual Mills:
TRAK DPM w/ 50” Table, 4,200 RPM Spindle, New Z Axis Installed & Digital Display In Good Condition
• TRAK DPM w/ 44” Table, Dual Power Table Feeds, New Digital Control & Recently Rebuilt Head In Good Condition
• LAGUN MILLMATIC 2 w/ 44” Table, Dual Power Table Feeds & Digital Display In Good Condition
SUPER MAX YC23S MILL w/ 52” Table, 1,300 RPM & Coolant System In Good Condition
• (6) SHARP VERTICAL MILLS w/ Power Feeds, 580 Rpm Spindles, 44” Tables And Dros
985 BRIDGEPORT MILL w/ 40” Table, Power Feed And DRO
HARDINGE TRUETT MILL
Manual Lathes:
• WEBB 11GX40 ENGINE LATHE w/ 15” Swing, 36” Between Centers, 1,800 RPM And Dro In Good Condition
WEBB TAKISAWA TSL-1000 ENGINE LATHE w/ 14” Swing, 40” Between Centers & DRO In Good Condition
Grinders:
2021 MHT 200MH w/ Radius Attachment & Imperial Newbould Digital Display In Very Good Condition!
• MOORE #2 JIG GRINDER w/ 12”X20” Table & DRO
• SHARP SH-1124 WET GRINDER w/ 12” Wheel And DRO
• HARIG 614 GRINDER (2) HARIG 612 GRINDERS
POPE JY42 GRINDER w/Dedtru Attachment
Fork Lift:
• CLARK 4000# PROPANE FORK TRUCK
Shop Truck:
2002 CHEVY S-10 2WD PICKUP In Good Shape w/ Cap & 114,750 Miles Inspected Until 6/26
Misc. Equipment:
J & L CLASSIC 14T COMPARATOR
MICROVIEW VIDEO INSPECTION MACHINE w/ Pc Controls
INGERSOLL RAND UP6-50PE-125 50HP, 215 CFM, 90 PSI
Rotary Screw Compressor w/ 27,000+/- Hrs.
• HANKISON HPRP200460 200 CFM Air Dryer
• ROLAIR 10hp, 120 Gal, 2 Stage Air Compressor
LASER MARKETING TECHNOLOGIES DOMINATOR CNC LASER ENGRAVER With PC Controls
• 5,000#, 5’X5’ FLOOR SCALE w/Digital Display
• KYSOR JOHNSON HA-250 HORIZONTAL AUTOMATIC BAND SAW w/ Coolant (Counter Not Working) ROLL-IN 16” SAW
• BAXTER 115B VERTICAL BAND SAW
• LINCOLN SQUARE WAVE TIG-355 WELDER w/ Magnum Feeder, Cart & Tanks
LINCOLN IDEALARC DC-250 TIG WELDER w/ LN-7 Feeder And Tank
• TEPCO WELDING FUME EXTRACTOR
• MECCA STAMPER
• Hydraulic Sheer
• Cyclone Blast Cabinet
• Ultra Matic Vibratory Tumbler
• Hardness Tester
• Arbor Presses
• Manual & Automatic Hydraulic Presses
• Cutting Torch Set
• Powermatic M66 8” Table Saw
• Belt Sanders
• Bench Grinders
• Tapping Machines
• Dump Hoppers
• Carts
• Work Benches
• Pallet Racks
• Material Shelves
• Pallet Jack
• Banding Machines
Tools/Tooling:
• Lista Style Heavy Duty 12 Drawer Cabinets
• Imperial Newbould Grindit
• New & Reground Drills, Endmills, Reamers
• Collets
• Tool Holders
• Gage Blocks & Pins
• Thread Gages
• Micrometers
• Height Gages
• Calipers & Other Inspection Items
• Magnetics
• Chuck Jaws
• Lots Of Mill Vises, Kurt & Others
• Material Stock (Steel, Aluminum, Etc.) Office Items:
• Desk Sets
• File Cabinets
• Office Supplies
• Shipping Supplies
• Lobby Furniture, Display Cabinet And Much More
Bunch Brothers Auctioneers are proud to return to Louisville, KY for the Fall Louisville Auction. The Auction will be conducted for Area Contractors, Dealers, Rental Houses & Individuals. THIS IS ONLY A PRELIMINARY LISTING!!!! EXPECT 100’S MORE ITEMS!!! VISIT www.bunchbrothers.com for daily updated listing!!! Or to consign your equipment call Steven Bunch (270) 748-8080 or Joe Bunch (270) 356-0360. Equipment will be added up to December 2nd.
• HYDRAULIC EXCAVATORS
• CRAWLER TRACTORS
• CRANE
• CRAWLER LOADERS
• HAUL TRUCKS
• MOTOR SCRAPERS
• LOADER BACKHOES
• COMPACT TRACK LOADERS, SKID STEER LOADER
• TELEHANDLERS
• MAN LIFT, FORKLIFTS
• UTILITY LOADERS
• ASPHALT & COMPACTION, etc.
• TRANSIT MIXERS
• TRUCK TRACTORS
• DUMP TRUCKS
• OTHER TRUCKS, etc.
• TRAILERS
ENDS:
TUESDAY, DEC. 2, 2025 @ 9AM
6851 MADISON AVE, INDIANAPOLIS, INDIANA 46227
Preview will be the Monday before the auction closes from 1-2pm
This auction will feature items from local estates and consignments of Vehicles, Equipment, Lawn And Garden, And More.
15% Buyer Premium Added to the Final Bid Price Plus 7% IN Sales Tax
Any invoice total exceeding $2,500 or titled vehicles MUST be paid via cash, wire transfer, or prior arrangements with Christy’s.
All payments are final. NO REFUNDS ALLOWED
All items sold AS-IS.
All must be paid for and picked up by Noon, The Thursday Following the auction.
There will be no loading help on the containers. Transporters info is located under the “Removal Times” button
Christy’s only has a small forklift onsite. We cannot move or load any large equipment over 5klbs, or storage PODS. CHRISTYS OF INDIANA, INC. 6851 S. Madison Avenue Indianapolis, IN 46227 317-784-0000 • info@christys.com www.christys.com
