Introducing Norgren PVGT Purge Valve
Rail Industry
Product Highlights:
Technical:
» Robust & compact design
» Valve function: 2/2 NC valve
» Wide operating temperature range
» Working pressure: 0 to 2 bar
» Excellent corrosion resistance
» Ambient temperature: -40 to 85°C
» Dry armature design to isolate water/moisture
» Medium temperature: -40 to 85°C,
» Minimized dead volume to minimize ice issue
» Supply voltage: 18 to 32 VDC
» Coil direction can be adjusted
» Nominal power at 20°C: 12 W, 24 VDC
» Customized sub-base version on request
» Ingress protection: IP6K9K
» Heater option to de-freeze ice in the valve during cold start
Rail Validation ISO 9227
Anti-corrosion (salt spray)
EN 61373, Category 1, class A and B
Shock and vibration
EN60068-2-1:2007
Environmental testing
Part 2-1: Tests
Test A: Cold
EN60068-2-2:2007
Environmental testing
Part 2-2: Tests
Test B: Dry heat
EN60068-2-30:2005
Environmental testing
Part 2-30: Tests
Test Db: Damp heat, cyclic (12 h + 12 h cycle)
PVGT20AG214-B00 PVGT20AG214-B10 PVGT20AG214-B20 PVGT25AG2R3-B00 PVGT25AG214-B00 PVGT25AG214-B10 PVGT25AG214-B20 PVGT30AG2R3-B00 PVGT30AG214-B00 PVGT30AG214-B10 PVGT30AG214-B20
2X M4x0.7 FOR GRUB SCREWS TO FIX PTC HEATER
Dimensions
DIN 72585-A3-2.1-Sn/K2 (ISO 15170-A3-2.1-Sn/K2) BLACK MATING PARTS: AMP 3-967325-3 (QTY.1) OR 3-1813099-3 (QTY. 1) SOCKET CONNECTOR 929974-1 (QTY.2) SOCKET CONTACT 281934-2 (QTY. 2) WIRE SEAL 965783-1 (QTY. 1) CAP.
2 mm 2 mm 2 mm 2.5 mm 2.5 mm 2.5 mm 2.5 mm 3 mm 3 mm 3 mm 3 mm
THIS SIDE DOWNWARD IS NOT RECOMMENDED
(78.3)
(26.1)
(48.3)
2x 5.3 0.15 THRU
Ø15.8 0.2
Ø14.00 0.15
OUTLET FITTING THREAD FORM: R 3/8
25.00
+0.15 2x 11.2 THRU 0 PTC HEATER MOUNTING HOLE
36.00 (14.0)
G 1/4-19 - 14.00 20.00 INLET PORT
33.00
46.00
19.00
5.00
17.00
15.00
24.00
46.00
FLOW ARROW (106.6)
DO NOT RESTRICT EXHAUST FLOW!!!
PTC HEATER （1：2）
NOTES:
1. VALVE FUNCTION: 2 / 2 NC VALVE 2. FLUID MEDIUM: H2O, H2, Air 3. SUPPLY VOLTAGE: 18 ~ 32 VDC, NORMINAL POWER AT 20°C: 12 W, 24 VDC 4. AMBIENT TEMPERATURE: -40 ~ 85 °C, MEDIUM TEMPERATURE: -40 ~ 85 °C, INLET PRESSURE: 0 ~ 2 BAR (MAX. BACK PRESSURE 0.4 BAR) 5. INGRESS PROTECTION: IP6K9K 6. MATERIAL: HOUSING: ALUMINUM WITH BLACK ANODIZING. GASKET: EPDM & HNBR. 7. COIL DIRECTION CAN BE ADJUSTED. 8. ADDON PTC HEATER ON REQUEST.
MATING: AMP 282104-1
BOM: No
Work in Progress
Prototype
LIFECYCLE STATE
PRODUCT PHASE
DESIGN CONTROL CN-Shanghai MATERIAL
1. RATED VOLTAGE: 24 VDC 2. WORKING VOLTAGE: 16 ~ 32 VDC 3. MAX CURRENT AT 24VDC: 12A 4. STEADY HEATING TEMPERATURE WITHOUT LOAD: 155±10 °C AFTER 5 MIN & 24 VDC
2
Find out more norgren.com
3
4
--
02
PPAP: No
COPY EXACT: NA
5
6
7
8
MASS (APPROX)
N/A
SURFACE TREATMENT
REV
ECN NUM
DESIGNED BY: DESIGNED DATE:
3RD ANGLE PRO
SPECIAL CHARACT
ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE
0 CC CRITICAL SIGN
UNLESS OTHERWISE STATED: DIMENSIONAL x. ±0.5MM, x.x ±0.25MM, x.xx ±0.15MM ANGULAR x. ±1°, x.x ±0.5°, x.xx ±0.25° SURFACE FINISH N8 (Ra 3.2µ) to ISO 1302:2002 REMOVE ALL BURRS, SHARP EDGES SHALL HAVE RADIUS OR CHAMFER 0.2/0.5 IF IN DOUBT ASK
NORGREN Co SH Tel:
ANY MODIFICATIONS ARE SUBJECT TO THE APPROVAL OF THE RESPONSIBLE
9
10