10
IV
https://doi.org/10.22214/ijraset.2022.41127
April 2022
International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538 Volume 10 Issue IV Apr 2022- Available at www.ijraset.com
Design and Fabrication of Emergency Braking System in Four-Wheeler Dr. S. K. Choudhary1, Himanshu Ramteke2, Ayush Kuryawanshi3, Rupam Sonbarse4, Pawan Khangar5, Mrunali Sawarkar6, Aman Gawande7, Amit Kumar8 Abstract: Automatic Emergency braking system could also be braking system which helps to use brakes automatically under the condition of emergency and helps to mitigate the severity of a cash. This paper deals with the study of designing and dealing of automatic emergency braking system using the various fundamental of mechanical and electronic engineering popularly mentioned to as ‘Mechatronics’ during this technique ultrasonic sensor with combine use of stereo cameras will detect the obstacle before of the vehicle and it’ll use relative distance between the obstacle and also the vehicle. The ECU will then judge if an accident is perhaps visiting happen or not and also the brakes are going to be applied automatically under this technique. I. INTRODUCTION Thanks to advancement in automobile industry there is new technology available in market and Automatic braking system is one in all them. The automated braking system that automatically activates brakes when it necessary. By this method we are able to avoid accident. Volvo is that the 1st who introduced emergency braking system in 2009. The automated emergency braking system carries with it sensor such video infrared, ultrasonic sensor to scan for possible obstacle ahead of auto then use brake control to forestall accident. A. 1) 2) 3) 4) 5) 6)
Components MS frame Spring Wheels Brake shoe Ultrasonic sensor DC motor Integrated circuit
©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 |
363
International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538 Volume 10 Issue IV Apr 2022- Available at www.ijraset.com B. 1) 2) 3)
Advantages This system can prevent collision of the vehicle with pedestrians Reduce the injuries occurring An ultrasonic sensor, cheaper and fewer of hardware than other forms of sensors presently Used.
C. 1) 2) 3)
Disadvantages Drivers being lulled into a false sense of security if they become over- reliant on such System. False alarms resulting in the system suddenly jamming on the brakes and shocking the Driving force. As ideal would be when you’re easing the car into a parking zone that has shrubs ahead of it. No driver wants to suddenly be shocked by such manoeuvres.
II. CONCLUSION This project work has provide us an excellent opportunity and experience to use limited knowledge. We gained a lot of practical knowledge regarding planning, purchasing, assembling and machining while doing the project work. In conclusion remark of our project work, let us add a few more line about our project work. Thus we have developed an ‘ Design and Fabrication of Emergency Braking System in Four-Wheeler’ which helps to know how to achieve low cost automation. REFERENCES [1] [2] [3]
G.B.S. Narang, “Automobile Engineering”, Khanna Publisher, Delhi pp671. William H. Crowse, “Automobile Engineering”. Donald L Anglin, “Automobile Engineering”.
Page 1 of 2 Web-site www.profe.udec.cV-gabriel/tutorials.com www.hwysatety.org
©IJRASET: All Rights are Reserved | SJ Impact Factor 7.538 | ISRA Journal Impact Factor 7.894 |
364