CAR WASH DOSING PUMPS Pneumatic dosing pump Power supply: compressed air
82mm 56mm
Antivibration feet
115mm
Hose-barb with quick release
Product inlet Ø10-13mm
Product outlet Ø10-13mm
116mm
6,4mm
148mm
134mm
Pneumatic pump ideal for foam washing devices, detergent dosing, liquid transfer, spray applications, coolings, circulations, filtrations and dispensers. Air inlet Ø6mm
Air discharge with silencer
Code
Membrane
Air inlet pressure
Flow rate
Vacuum height
CDR.FJ001
Santoprene
1,4-6,9 bar
max 18,9l/min
dry 4,5m/primed 6m
Pneumatic dosing pump, self-priming with double membrane with air discharge with silencer. Propylene pump body resistant to chemical products with 4 anti-vibration feet, spring made of Hastelloy. The pump can run idle without being damaged. Maximum air inlet pressure must not exceed 8,3bar. For most applications, it is recommended not to exceed a height of 1,2 m above the liquid level. Product hose holder and air inlet equipped with quick release for easy assembly. ATTENTION!!! Pump not compatible with oils, solvents, products containing solvents, D-Limonene and aromatic hydrocarbons. At least a 40 mesh (350 micron) suction filter produced before the pump is recommended to retain coarse foreign particles.
Copyright© Idrobase Group. All rights reserved.