OWNER: JOB NO:
CHECK
INSPECT LOG BOOK, STABILITYCERTIFICATE (LOG BOOK ENTRIES, FAULT LOG COMPLETED, SERVICING UPTO DATE, INSPECT MACHINE FOR NON STANDARD MODIFICATIONS THAT AFFECT STABILITY)
CHECKOPERATION OF MACHINE CONTROLS (INCLUDING BASE CONTROLS)
CHECKOPERATION OF HILL SIDERESTRAINT
CHECKOPERATION OF EMERGENCYLOWER
CHECKOPERATION OF INCLINOMETER
CHECKOPERATION OF DROP GATE
CHECKOPERATION OF HOUR METER
CHECKFOR ENGINEFAULT CODES (EFI ONLY)
INSPECT FUEL SYSTEMFOR LEAKS
INSPECT ELECTRICAL WIRING
INSPECT BATTERYELECTROLYTE LEVEL
CHECKTORQUE ENGINE MOUNT BOLTS
INSPECT HYDRAULIC OIL LEVEL / TYPE - BOOMLOWERED
INSPECT HYDRAULIC HOSES AND FITTINGS FOR DAMAGE
INSPECT PUMP COUPLING
INSPECT LANYARD ANCHOR POINT ON CAGE
CABLE GUARD FITTED TO BASE OF CAGE
INSPECT CONTROL CABLES
INSPECT ALL SAFETYDECALS ARECLEAN AND READABLE –INSPECT FLOOR MAT CONDITION GREASE MACHINE
INSPECT PIVOT PINSFOR MOVEMENT AND FIT REPAIR COLLARS AS NECESSARY.
INSPECT ALL PIVOT PINS RETAINING BOLTS AND CIRCLIPS
INSPECT KINGPIN RETAINING BOLTS – CHECK TORQUE
INSPECT CASTOR WHEEL HUBBEARINGS / FWH BEARINGS
INSPECT PARK BRAKE RINGS AND BRAKE PIN OPERATING
INSPECT ALL STRUCTURAL WELDS– CHASSIS LEGS/BOOM/STAYBAR
INSPECT FOR CORROSION ON STRUCTURAL COMPONENTS AND FUEL TANK
CHECK TORQUE STAYBAR NUT ON ROUND TYPE LEVELING BAR (Pre 2012 models)
CHECK STARTER MOTOR FOR NOISY OPERATION – LUBE PINION IF REQUIRED (Single cylinder engines M10 / CH15)
INSPECT TYRES FOR PERISHING AND RIMS FOR CORROSION AND CRACKING
CHECKTYRE PRESSURES
CHECKWHEEL NUT TENSIONS
CHECKHUB NUT TENSIONS
ATTACH CERTIFICATION DECAL TO MACHINE, WRITTEN REPORT TO CUSTOMER FILL IN LOGBOOK
DECLARATION:
I herebycertifythat the Mobile Elevating Work Platform identified above has been inspected in accordance with the requirements of AS 2550.10 and has been found to be in a safe and serviceable condition at the time of inspection.
TECHNICIAN NAME: SIGNED :