WALL
Installation instruction Smart Required additional material: • Cleaning utensils, to clean the wall • Spirit level • Mounting aid (included with the product) 1. Prepare the wall First clean the wall and remove all foreign objects.
2. Pull off the adhesive foil Pull off the foil of the slats. Make sure that the adhesive surface is not soiled. 3. Attach the slats Press the slats firmly onto the wall. Always use a spirit level and the enclosed attachment aid for an equal distance of 16,5 mm.
Smart Plus / Prime Additional material required when screwing acous to the wall/ceiling:
Required additional material, if you choose the adhesive variant:
• Cleaning utensils to clean the wall
• Cleaning utensils to clean the wall
• Spirit level
• Spirit level
• Sandpaper
• Installation glue
• Cordless screwdriver/drill, depending on surface
• Two wallpaper trestles
• Screws / Dowels 1. Prepare the wall 1. Prepare the wall
First, clean the wall and remove all foreign objects.
First clean the wall and remove all foreign objects. 2. Prepare the panels 2. Prepare the panels Pre-drill the panel and substrate for a clean and stable result. 3. Attach the panels Screw the screws through the HDF/felt into the wall. Use a spirit level for both options.
Spread the glue on the back or directly on the wall. Tip: Take two wallpapering trestles to help. 3. Attach the panels Press the panels firmly against the wall.
Wood is a fascinating product of nature. Differences in color and structure are possible and to be tolerated.