Strong SPC Structure product sheets EN

STRUCTURE

Rigid design flooring

TENNESSEE OAK

◊ Embossed in register (EIR)

◊ Dimensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ Only 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Suitable for electric underfloor heating

◊ Patented I4F click connection

◊ Low Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- Amount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness.

Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- Linoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- Provide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints

STRUCTURE

Rigid design flooring

VIRGINIA OAK

◊ Embossed in register (EIR)

◊ Dimensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ Only 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Suitable for electric underfloor heating

◊ Patented I4F click connection

◊ Low Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- Amount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness.

Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- Linoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- Provide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints

STRUCTURE

Rigid design flooring

GEORGIA OAK

◊ Embossed in register (EIR)

◊ D imensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ O nly 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Su itable for electric underfloor heating

◊ Patented I4F click connection

◊ L ow Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- A mount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness. Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- L inoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- P rovide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints The pictures may differ in color from the original product.

STRUCTURE

Rigid design flooring

OKLAHOMA OAK

◊ Embossed in register (EIR)

◊ D imensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ O nly 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Su itable for electric underfloor heating

◊ Patented I4F click connection

◊ L ow Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- A mount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness. Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- L inoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- P rovide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints The

STRUCTURE

Rigid design flooring

LOUISIANA OAK

◊ Embossed in register (EIR)

◊ D imensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ O nly 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Su itable for electric underfloor heating

◊ Patented I4F click connection

◊ L ow Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- A mount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness.

Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- L inoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- P rovide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints

STRUCTURE

Rigid design flooring

KEY WEST OAK

◊ Embossed in register (EIR)

◊ D imensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ O nly 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Su itable for electric underfloor heating

◊ Patented I4F click connection

◊ L ow Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- A mount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness. Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- L inoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- P rovide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints The pictures may differ in color from the original product.

STRUCTURE

Rigid design flooring

CAROLINA OAK

◊ Embossed in register (EIR)

◊ D imensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ O nly 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Su itable for electric underfloor heating

◊ Patented I4F click connection

◊ L ow Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- A mount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness. Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- L inoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- P rovide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints The pictures may differ in color from the original product.

STRUCTURE

Rigid design flooring

ALABAMA OAK

◊ Embossed in register (EIR)

◊ D imensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ O nly 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Su itable for electric underfloor heating

◊ Patented I4F click connection

◊ L ow Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- A mount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness.

Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- L inoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- P rovide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints

STRUCTURE

Rigid design flooring

MISSISSIPPI OAK

◊ Embossed in register (EIR)

◊ D imensionally stable

◊ Endless decor variation

◊ Can be laid on large areas (400 m2)

◊ Water resistant

◊ O nly 3,8 mm mounting height

◊ Format 1220 x 228 mm

◊ Wear layer 0,5 mm

◊ Carton content 10 planks = 2,782 m2

◊ Su itable for electric underfloor heating

◊ Patented I4F click connection

◊ L ow Emission (Certified A +)

◊ Utilization class 23/33

◊ Phthalate and plasticizer free

Note before laying:

- A mount needed + 10% of the area

- Subfloor clean, hard, flat, stable and firm

- Uneven surface = max 3 mm per 1,2 m

- Acclimatize the planks horizontally in the room for at least 24h!

- Important: Room temperature = floor temperature during installation

- Use temperature 15°C to 60°C

- The underlay mat need to have a pressure resistance of at least 500 kPa, maximum 1,5 mm thickness and maximum 0,5 mm unevenness. Recommendation: dB Cover LVT/SPC 1.5

Note during laying:

- L inoleum and wood-based subfloors require decoupling with 0,2 mm PE foil!

- The planks must be properly clicked in!

- P rovide expansion joints to walls and fixed objects of > 8 mm

- Max 20 x 20 m (400 m 2) without expencion joints