DURASHEAR LM160 | LX205 FOR SILAGE Keeps your siliage cut surface perfectly clean and tidy throughout the feeding season. To achieve optimum feed quality, silage preservation is absolutely essential - this challenge starts at mowing/harvesting, but continues after the silage bunker has been opened, throughout the feeding season. The Hustler DuraShear provides a precise, firm and clean cut surface, preventing the development of yeast and mould in your silage. Replaceable cutting teeth
Excellent visibility
Wide opening
The cutting teeth are made of tool steel (carbon/alloy steels), an ideal material for sharpness. However, replacing teeth after several years of use is possible and quick.
The back grid located at the back has been cleverly placed to strengthen the frame without compromising the visibility of the load.
Thanks to the wide opening of the grab, you get an excellent cutting radius for a perfectly straight cut surface.
Sides with cutting edge For an absolutely perfect cut, the sides of the grabs are made of 8 mm-thin steel with a cutting edge.
Strong clamping The hydraulic rams were carefully placed to provide maximum clamping power while avoiding significant constraints on the gear. This means you get equipment that is guaranteed to last a long time! The LX series models are equipped with triple rams that can handle the most compacted and hardest silage, ensuring a clean, straight and consistent cut along the length of the silage pit.
4-year warranty
Greasable pins
High-quality tines
All our products are covered by a 4 year warranty for peace of mind - another proof of the durability of Hustler products!
Greasable pins protect the bushes from premature wear caused by dirt and grit ingress.
Our forged CONUS II stepped tines are designed to reduce wear on the rear frame by distributing the stress points evenly. This optimises load distribution and reduces the risk of material loss.
SPECIFICATIONS LM160 | LX205 APPLICATION : Silage Handling UNIT WEIGHT: 504KG | 666KG DIMENSIONS: 1600 mm | 2050 mm CAPACITY: 0.85 m³ | 1.06m3 HYDRAULIC REQUIRED: Approx 40L/min