Holzland Köster | Moso | Bamboo N-durance by HolzLand Köster

MOSO® Bamboo N-durance

Beautiful, sustainable and elegant outdoor decking

MOSO® Bamboo N-durance With Bamboo N-durance, MOSO® transforms the rapidly renewable resource bamboo into beautiful natural outdoor products with a warm caramel colour. The technical and ecological benefits make Bamboo N-durance the real outdoor ‘building material of the future’. MOSO® uses a unique Outdoor-Density® process that combines special crushing, steam-pressure treatment and compression with a special finish to enhance the durability, hardness, dimensional stability, fire resistance and look.

Bamboo: the fastest growing plant in the world

"With

MOSO® Bamboo N-durance we use the latest technologies to produce a product that doesn’t only perform in terms of stability and durability, but also has a warm, natural appearance which is appreciated by so many people” René Zaal, CEO MOSO International BV

table of contents from bamboo to MOSO® Bamboo N-durance benefits MOSO® MOSO® Bamboo N-durance Outdoor Decking accessories installation maintenance & cleaning user information

4 5 6 7 8 10 11

test results sustainable choice MOSO® Bamboo Outdoor about MOSO

14 16 18 19

 www.moso-bamboo.com/outdoor-density

from bamboo to Bamboo N-durance Thermally modified and engineered bamboo products are becoming more and more popular throughout the outdoor building industry. Kilometers of decking, numerous façades and various outdoor furniture projects have utilised ‘the building material of the future’. Bamboo is a rapidly renewable resource and the perfect material for MOSO®’s innovative outdoor product: MOSO® Bamboo N-durance. Allow us to explain exactly how it is made.

stem to strands After harvesting, the mature bamboo stems are split into strips in a longitudinal direction and the outer and inner skins are removed. The strips are then crushed using a number of incision rollers which create cross linked strands. The strands are light yellow in colour and have a rich caramel colour after a steam-heat process at a temperature of between 130OC and 140OC (carbonisation). By doing this, the material becomes more stable.

Made from bamboo the fastest growing plant on earth. Harvesting after only 4-5 years.

from strands to product To create outdoor products, bamboo raw material is converted into panels as follows: Bamboo strands are dipped into phenolic glue and after drying, the strands are put into a mould and compressed under high pressure and at high temperature. The output of the compression is a large panel, which is cut into smaller sections (boards). These are then further processed and profiled into the required shape (for example, for decking: a grooved surface and edge grooves to allow installation with fasteners). As a last step, the outdoor products are prefinished with a special finish and treatment that prevents fast weathering and limits surface fungi development.

Spliting the bamboo stems, removing the outer and inner skins and crushing the strips into strands.

Special crushing and carbonization at ca. 140°C .

Outdoor-Density® We call the combination of crushing, steam-pressure treatment and compression an Outdoor-Density® process. It increases the density from 650-700 kg/m3 to approx. 1200 kg/m3 and improves the hardness of this product significantly. After pressing, the material is stronger and harder than almost any other hardwood in the world. At the same time, the dimensional stability of bamboo is improved substantially. In addition, the Outdoor-Density® production process gives the material its beautiful natural appearance with a rich caramel colour. Besides stability and hardness improvements, the durability is improved to the best durability class possible, from Class 5 to Class 1 according to EN 350 / CEN/TS 15083-2, simulated graveyard test / Class 1 according to EN 350 / EN 113-2 (CEN/TS 15083-1). Bamboo N-durance achieves the use/risk Class 4 according to EN 335.

Compressing under very high pressure into Outdoor-Density® material.

Profiling and sanding.

Test results are available at the end of the document.

Applying a special finish.

MOSO® Bamboo N-durance benefits beautiful & elegant

hard & durable

high stability

fire resistant

• A warm caramel colour. • Natural, high quality look. • Choice between flat / grooved reversible board or the curved surface board. • Use of hidden fasteners avoids face screwing and plugging. • Yearly maintenance is required to retain the caramel colour and ensure a luxurious appearance.

• Exceptionally hard: Brinell >9.5 kg/mm2 (harder than any tropical hardwood available). • Very high density: +/1200 kg/m3. • Bamboo decking with Durability Class 1 according to EN 350 / CEN/TS 15083-2, simulated graveyard test / Class 1 according to EN 350 / EN 113-2 (CEN/ TS 15083-1). • Use Class 4 in accordance with EN 335. • Strong fungi resistance according to EN ISO 846, after superficial treatment (tested on new material). • MOSO® gives Bamboo N-durance Decking 25 years warranty.

• Very stable as a result of a unique OutdoorDensity® process: crushing, carbonization under high pressure and compression. • Far more stable than tropical hardwoods enabling an end-match system (tongue & groove on ends). • Limited tendency to warp. • No gap between the ends of the boards necessary. • Only 5-6 mm space between the boards when MOSO® Fasteners are used.

• Achieves fire resistance Class Bfl-s1 following EN 13501-1 without use of fire retardants. • As a result, MOSO® Bamboo N-durance can be easily applied in public projects without additional protective measures.

easy to install

endless resource

economical

• Can be installed using hidden fasteners (edge grooved) or face screwed. • Both sides of the board grooved or flat - can be used. • Fixed board length 1850 mm, easy for 1 person to install, no complicated installation plans necessary. • MOSO® Fasteners make it easy to install and uninstall. • End-match system simplifies the installation by allowing the joint to float between the joists. • MOSO® Bamboo X-treme® Sub frame joists available.

• Made from bamboo; with a growing speed of up to 1 meter per day it is the fastest growing plant on earth. • Ready to harvest after 4-5 years (compared to up to 100 years for hardwood species) no deforestation. • Engineered product consisting of 85% natural bamboo strands.

• Simple and fast installation; up to 30% savings in installation costs! • Reduced waste because of the end-match system. • Cost effective transportation because of the fixed 1850 mm length. • Cost effective and space reducing stocking because of unique multi usable board.

product datasheet

 www.moso-bamboo.com/n-durance

MOSO® Bamboo N-durance Outdoor Decking MOSO® Bamboo N-durance Decking is a solid, Outdoor-Density® board, made from compressed bamboo strips. Bamboo N-durance has a warm caramel colour, resulting from a steam-pressure treatment on the bamboo material. A special crushing and compression technique increases the hardness and stability and provides MOSO® Bamboo N-durance with the highest durability class possible in the appropriate EU norms. MOSO® Bamboo N-durance‘s end-match system enables an unlimited number of boards to be connected creating a visually infinite length. The special symmetrical shape offers the possibility to choose between either the grooved or the flat surface and allows for quick installation with MOSO® Fasteners. When exposed to outdoor conditions, the caramel colour of MOSO® Bamboo N-durance will naturally fade.

Standard Groove / Flat (reversible board)

Curved

End-match system

Outdoor-Density®

EN-2022-01

P: Superficial preservative against surface fungi, Woca: Woca Exterior Wood Oil. Ends of the boards are protected with Sikkens Kodrin WV 456 sealer.

Product Code

Surface

Finish

Edge groove

End-matched

Length edges

End edges

Dimensions (mm)

BO-DTC171G

Grooved/Flat

P + Woca

2 sides

Yes

2 mm x 45°

1850x137x20

BO-DTC191G-C

Curved

P + Woca

2 sides

Yes

2 mm x 45°

1850x155x20

installation summary

technical characteristics and certifications

• Install a suitable, fixed, stable and durable sub frame. MOSO recommends the use of MOSO® Bamboo X-treme® Sub frame joists. • Determine which side of the board will be used: the grooved or flat side. • Fix the boards on the sub frame using fasteners (to be inserted in the edge grooves of the board) or alternatively with screws (through the surface). • Use a 1-2% slope and ensure good ventilation of the decking. The slope is not necessary for the curved boards. • After installation: make sure proper cleaning and maintenance is done. • When an outdoor finish is not regularly applied the typical bamboo wood grain structure will become more visible. • Bamboo N-durance is available pre-oiled with Woca Exterior Wood Oil. In order to maintain the rich caramel colour it is recommended to reapply Woca Exterior Wood Oil 3 to 4 months after installation. • Yearly maintenance with Woca Exterior Wood Oil is required to maintain the antisurface fungi resistance. • Yearly maintenance to retain the caramel colour and ensure the luxurious appearance. • Store in a cool and dry place away from direct sunlight, and protected from weather influences, dirt and dust. • For further info: please see the installation/maintenance instructions. • Full version available on  www.moso-bamboo.com/n-durance

• • • • • • •

WARRANTY

Class 1

Class 4

EPD

EN350

EN335

EN15804

•

• • • • • • •

Density: +/- 1200 kg/m3 Resistance to Indentation - Average Brinell Hardness: ≥ 9.5 kg/mm2 (EN 1534) Reaction to fire: Class Bfl-s1 (EN 13501-1) Slip resistance: R 10 (CEN/TS 16165 Annex B - DIN 51130) Modulus of Elasticity: 12610 N/mm2 (mean value - EN 408) Bending strength: 95.5 N/mm2 (characteristic value - EN 408) Biological durability: Class 1 according to EN 350 / CEN/TS 15083-2, simulated graveyard test / Class 1 according to EN 350 / EN 113-2 (CEN/TS 15083-1) Superficial preservatives and finish: comply with European biocide product regulation (BPR) and are not listed on the restrictions list of REACH Annex XVII/ candidate list. Effectiveness against surface fungi: Class 0, Strong fungi static (EN ISO 846), treatment only superficial. Use Class: Class 4 (EN 335) Environmental Product Declaration - EPD (EN 15804) (www.moso-bamboo.com/epd) FSC®: Products available with FSC® certification on request. Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®), EQ 2, SS 7 v2009: MR 6, IEQ 4.3, IEQ 4.4 Contribution BREEAM: MAT 1, MAT 3 (FSC®), MAT 5 Guarantee: 25 years

product datasheet

 www.moso-bamboo.com/n-durance

MOSO® Bamboo N-durance Outdoor Decking accessories MOSO® Fasteners With these fasteners MOSO® Bamboo N-durance Decking can be easily installed. When installed correctly there will be 5-6 mm gaps between the boards. The fasteners are supplied with matching stainless steel screws (square bit). For installation on aluminium sub frame joist (not provided by MOSO®), special screws are available. Product Code

Item

Material

Colour

Dimensions fastener (mm)

Dimensions screw (mm) 4.5x30

CLIP-SCREW-BX08

Fastener Asymmetric with screw (20 mm)

Stainless steel A2 (AISI304)

Brown

27x22.5x10.8

CLIP-BX08

Fastener Asymmetric without screw (20 mm)

Stainless steel A2 (AISI304)

Brown

27x22.5x10.8 29x25x11.2

CLIP-SCREW-BX801

Fastener Start/End Top with screw (20 mm)

Stainless steel A2 (AISI304)

Brown

SCREW-BX11-01

Screw for aluminium sub frame joist

Stainless steel SS410 (AISI410)

Black*

recommended number of fasteners/m2 decking

CLIP-SCREW-BX08 / CLIP-BX08

4.5x30 4x20

CLIP-SCREW-BX801

137 mm wide board ~20 pcs/m² 155 mm wide board ~17 pcs/m² SCREW-BX11-01 *) Only black screw head. Based on a centre to centre distance of 462.5 mm between the joists.

MOSO® Bamboo X-treme® Sub frame joists The MOSO® Bamboo X-treme® Sub frame joists are made of Thermo-Density® heat-treated bamboo. Product Code

Material

Finish

Dimensions (mm)

BO-SB155

Thermo-Density® bamboo

Unfinished

2440x60x40

cleaning & maintenance products Under the influence of wind, rain, sun and snow the decking will weather. MOSO® recommends to maintain MOSO® Bamboo N-durance Decking with Woca maintenance products, depending on the product installed. The silicon carbide broom and machine disk are perfectly suited to clean and smooth the decking surface of Bamboo N-durance and to remove splinters due to the capability to sand the surface in addition to cleaning it. Product Code

Material

DISK-01

16” Silicon carbide disk

BROOM-01

Silicon carbide broom

CLEANER-WOCA-01

Woca Exterior Wood Cleaner 2.5 ltr

OIL-WOCA-011

Woca Exterior Wood Oil Teak colour 2.5 ltr

SEALER-05

Sealer for ends of boards 250 ml

WOCA-APPLICATOR

Woca Applicator set for oil

EN-2022-01

 www.moso-bamboo.com/n-durance

MOSO® Bamboo N-durance Outdoor Decking installation instructions before installation

please note

• Waterlogging under the decking must be avoided by preparing a water permeable ground structure. This can be achieved by sand layers and gravel dispersion above. • Use cement/stone tiles 40-50 mm thick or pedestals, to support the sub frame (see drawing). • Place a root barrier under the tiles or pedestals to prevent weeds growing under the decking. • Install the decking boards with a slope of 1-2% to enable water to run off the surface. • The decking with the curved surface BO-DTC191G-C can be installed without a slope. Thanks to the curved surface, fast drainage from the boards is guaranteed. • Ensure good ventilation of the decking by keeping at least 20 mm gap from walls and objects and avoid closing the decking at the sides. The gap between the boards must be open to ensure unrestricted ventilation. • When the surface / soil underneath the decking is not fast drying, there should be at least 100 mm distance between the decking and the surface underneath.

• Use sub frame joists with the minimum size of 40x60 mm. MOSO® recommends the use of MOSO® Bamboo X-treme® Sub frame joists, which are specifically produced for use in combination with our decking products. Alternatively, suitable joists are those with the same durability class as the decking; aluminum sub frame joists, stable hardwood joists or pine joists. When using hardwood or pine as joists, make sure the moisture content of these joists is below 12%. Avoid direct contact with the soil. • MOSO® Sub frame joists can be installed without gaps, connecting the joists with screws and glue suited for outdoor use. Other sub frame joists should be installed according to the instructions of the supplier. • In order to create a stable deck frame, the outsides of the frame have to be connected at regular intervals to the ground/structure below. Alternatively cross bracing can be applied. • Install the boards on sub frame joists with 462.5 mm space between the joists (centreto-centre) so each board is supported by 5 joists. Always install the ends of the boards exactly on the joist. Distance between sub frame joist depends on category of use. For non-residential use, please contact MOSO®. • If a random installation pattern is preferred, make sure that the sub frame joists (centreto-centre) are no more than 300 mm apart. • Always install cut off boards on at least 3 sub frame joists.

• The MOSO® Bamboo N-durance Decking board is a natural product, which varies in colour, grain and appearance. Colour can quickly change from caramel to a lighter colour, depending on the maintenance schedule. • Small cracks and splinters on the surface and on the ends of the boards can arise from the different drying characteristics of the surface and cross cut ends. The surface will also get rougher over time. This phenomenon is normal for most wood species and is minimized for this product by its unique ‘Outdoor-Density®’ production method. Cracks on the board ends can be further minimized by applying sealer to the ends of the boards (see ‘the installation’). • Splinters and roughness can be removed by cleaning the surface of the decking with the silicon carbide broom or machine disk which MOSO® supplies. The surface will become smoother and splinters are removed. • Dimensional changes or cupping of the boards can occur after installation. This phenomenon is normal for most wood species and is minimized for this product by its unique Outdoor-Density® production process. • When using the flat side of the boards as surface please note that deformation under influence of climate will be significantly more visible. Some deformation and/or cupping of the material can occur. This phenomenon is normal for outdoor exposed wood and cannot be grounds for a claim.

40 mm

60 mm

60 mm 40 mm

option A

option B option with 2 fasteners

max. 600 mm

5-6 mm 5-6 mm

max. 600 mm 40 mm

max. 600 mm

60 mm

max. 800 mm 462.5 mm

462.5 mm

EN-2022-01

max. 800 mm

Distance between sub frame joists depends on category of use. For non-residential use, please contact MOSO®.

60mm

40mm

 www.moso-bamboo.com/n-durance

MOSO® Bamboo N-durance Outdoor Decking installation instructions the installation

cleaning and maintenance

storing

• Keep at least 5-6 mm gap between the boards (in width direction). With MOSO® Fastener installation this is automatically the case. • Because of the stability of the boards and the end-match system no expansion gap is needed on the ends of the boards. • Every cut end has to be treated with board end sealer, to prevent water penetration. A sealer is available from MOSO. • Yearly maintenance with Woca Exterior Wood Oil is required to maintain the warm caramel colour and the anti-surface fungi resistance. For decking oiled with Woca Exterior Wood Oil, it is recommended to perform the first maintenance after 3-4 months.

MOSO® Bamboo N-durance Decking is pre-oiled, double sided, with Woca Exterior Wood Oil. • Clean and maintain the decking at least one time per year with Woca Exterior Wood Cleaner and silicon carbide broom or -disk. Depending on climate and use it may be necessary to perform cleaning and maintenance more than once per year. • Remove the dirt water residue on the boards with clean water and let the surface dry. • Apply 1-2 new layers of Woca Exterior Wood Oil. When a new finish is not applied once a year, depending on the situation, the decking will change to a lighter colour. Superficial fungi may also develop. • It is advisable to keep the decking free from dust and dirt as much as possible (clean by broom regularly).

Store MOSO® Bamboo N-durance in a cool and dry place away from direct sunlight, and protected from weather influences, dirt and dust.

installation with fasteners

• Determine the surface side of the boards (grooved or flat surface). • Use the MOSO® Asymmetric Fasteners in the following sequence: • Press fastener with hooked side in the edge groove of one board. • Pre-drill the joist screw holes 30 mm deep. On bamboo joists: use a 3.5 mm wide drill bit 110 mm long. • Fully tighten the screw. Always screw vertically to the joist. Apply low torque with slow screwing speed on the screwing machine. Perform some tests for correct torque and speed adjustment before full installation. • Install every following board by sliding it under the waved side of the fasteners. • Use approx. 20 fasteners per m2 (137 mm) or 17 fasteners per m2 (155 mm). When the tongue and groove are connected on the joist, use 1, preferably 2 fasteners, 1 for every board (see drawing options A/B). • For bamboo or wood joists only use the included stainless steel decking screws (4.5 x 30 mm).

additional note Whilst all due care is taken to ensure the accuracy of the installation instructions, individual circumstances (location, sub floor and installation procedures) may vary and are beyond the manufacturer‘s control. In case of doubt, therefore, consult the distributor. Always follow the local building code. These instructions are subject to change. For the latest version visit www.moso-bamboo.com/n-durance Copyright © Nothing from this text may be reproduced without the prior permission in writing from MOSO International BV.

screw down installation

• Determine the surface side of the boards (grooved- or flat surface). • Pre-drill the screw holes 20 mm from the side of the board. Be sure to pre drill with a large enough drill (80% of screw diameter) to avoid cracking of the decking. • Always screw both sides (left and right in the width direction) of the board. • Use at least A2 stainless steel quality decking screws (approx. 5 x 50 mm).

EN-2022-01

 www.moso-bamboo.com/n-durance

MOSO® Bamboo N-durance Outdoor Decking cleaning & maintenance maintenance with Woca

application of oil

maintenance of flat surface

The surface of decking is weathered under influence of wind, rain, frost and sunshine (UV). As a result, the surface turns grey, dirty and cracks/splinters will appear. WoodCare Denmark (Woca) has developed different outdoor cleaning- and maintenance products. Woca Exterior Wood Cleaner loosens dirt and removes green growth from the surface, without damaging it. Woca Exterior Wood Oil protects the bamboo decking and bringing back the warm caramel colour.

• Apply in dry weather only. Avoid direct sunlight and high temperatures. • Always make sure the decking is clean, dry, free of dust and dirt. • Stir the oil thoroughly before use. Apply an even thin coat of oil with a brush. • The oil is cream-coloured when it is wet. • After a few minutes, the material has an oily appearance as the water is evaporating. • Wipe off any excess oil with clean cotton cloths after no more than 5-10 minutes. • Take particular care to remove excess oil from joints and grooves. • Repeat the above process. • When the material is dry, it may be polished with a polishing pad or polishing machine to ensure an extra hard-wearing surface. It takes 24 to 48 hours for the oil to harden thoroughly, depending on weather conditions and outdoor temperature. The material should not be exposed to water during this period. • Pay attention to the ends of the joists and cut ends of the boards, which tend to absorb more water, and finish well to prevent water penetration. A sealer is available from MOSO®.

Please be aware of the fact that on the flat surface, irregularities in the surface (e.g. cracks, splinters) are more visible than on the grooved surface. With regular maintenance with Woca Exterior Wood Oil, this will be reduced.

cleaning

Due to the risk of self-ignition it is important that oil-wetted cloths are soaked in water and are disposed in a tightly closed container after use. For more details, check the instructions of the finish supplier.

theoretical consumption

• Mix Woca Exterior Wood Cleaner with water in the ratio 1:2 and apply it. If the decking is extremely dirty, exterior cleaner may be used undiluted. • Woca Exterior Wood Oil: 12 - 15 m2 / litre.

EN-2022-01

• Soak MOSO® Bamboo N-durance with plenty of water. If possible use a garden hose. Do not use high-pressure cleaners. • Mix Woca Exterior Wood Cleaner with water in the ratio 1:2 and apply it. If the decking is extremely dirty, exterior cleaner may be used undiluted. Clean the decking with a silicon carbide broom or machine disk (see accessories). • Scrub the soaked material lengthwise following the bamboo grain until the material appears clean. • If the decking has been installed flat side up, first scrub under an angle of 45 degrees before scrubbing in the length direction. When using a machine disk this is not necessary. • Repeat the cleaning if necessary. Clean the surface carefully with water. • Leave MOSO® Bamboo N-durance to dry for approx. 24 hours. The material must be completely dry before oil treatment can be done.

risk of self-ignition

Check out the maintenance and cleaning movie at: www.moso-bamboo.com/youtube/n-durance

 www.moso-bamboo.com/n-durance

MOSO® Bamboo N-durance Outdoor Decking user information appearance and colour

swimming pool

normal phenomena

MOSO® Bamboo N-durance is a natural product, which can vary in colour, grain and appearance. Colour will change over time depending on the maintenance schedule. The boards have a warm caramel colour when installed, which turns into a lighter colour several weeks after installation.

If MOSO® Bamboo N-durance Outdoor Decking is to be used around swimming pool areas, the following has to be taken into account: MOSO® Bamboo N-durance is a natural (wood like) product. As with any wooden product used outdoors, there is always a risk of formation of splinters, however splinters from MOSO® Bamboo N-durance are normally smaller than (tropical) hard wood splinters. A regular application of a finish (more frequently necessary around swimming pools) is required to reduce the formation of splinters. Furthermore, regular maintenance with the silicon carbide broom or –disk is required to effectively remove splinters and smoothen the surface. The boards must be installed in such a way that the surface water cannot flow directly into the pool. Also bear in mind that treated swimming pool water contains salt and chlorine which can cause the boards around the pool to “weather” and become bleached faster than the boards in areas not exposed to the swimming pool water.

Cracks on the surface and on the ends of the boards can occur due to the different drying characteristics of the surface and board ends. This does not affect the stability or durability of the board.

If a warm caramel colour is preferred, maintenance should be done with Woca Exterior Wood Oil or a similar waterbased finish. See for further details the installation and maintenance instructions: www.moso-bamboo.com/n-durance Yearly maintenance with Woca Exterior Wood Oil will be required to maintain the warm caramel colour and the anti-surface fungi resistance. For decking oiled with Woca Exterior Wood Oil it is recommended to perform the first maintenance after 3-4 months. MOSO® Bamboo N-durance shows similarity to other hardwoods in grain and structure. The characteristic bamboo nodes however can still be recognized and give the product a special and lively look.

The surface side of the boards will become rougher over time and can form (small) splinters as a result of continuous water absorption and desorption due to dry and wet weather periods. Dimensional change or cupping of the boards can occur after installation. These phenomena are normal for most hardwood species and MOSO® Bamboo N-durance. After installation, there might be some bleeding or leaching of colour from the bamboo material when it gets wet, e.g. when it rains. This possible bleeding is typical for wood and will disappear over time. The brownish liquid can easily be cleaned from the Bamboo N-durance material, however controlled water drainage and prevention of splash water is required to prevent any discoloration of surrounding or underlying building components.

maintenance of flat surface When using the flat side of the boards as top surface please note that deformation under influence of climate may be more visible. Some deformation and/or cupping of the material can occur. This phenomenon is normal for outdoor exposed wood and cannot be grounds for a claim.

dry condition

wet condition

EN-2022-01

Commercial Center Israel ????? MOSO®

Private Residence The Netherlands

Private Residence Israel ????? MOSO®

Showroom Maia Distiplas Madrid, Spain

test results of MOSO® Bamboo N-durance The excellent performance of MOSO® Bamboo N-durance has been extensively tested by acknowledged research institutes. Find a summary of the most important test results below. Full reports are available upon request. Only MOSO® can ensure you have the original, unique Bamboo N-durance product. Other products that copy the original do not offer the same quality and level of durability, dimensional stability and ecology. With a look-alike product, there is a large risk of claims after installation. Always ask for the original MOSO® Bamboo N-durance products!

durability EN 350 / CEN/TS 15083-2

Classification Durability Class Use Class

2. durable

3. moderately durable

4. slightly durable

5. not durable

2 moist interior

(o)

3 exterior, above ground

(o)

(o)-(x)

4 ground contact / fresh water

(o)

(x)

5 salt water



(x)

interior

o (o) (o)–(x) (x) x 

durability class class 1

average brinell hardness 9.5 kg/mm2

EN 350 (CEN/TS 15083-2) and EN 350 / EN 113-2 (CEN/TS 15083-1)

(EN 1534)

Strand Woven Bamboo Bangkirai

Merbau Beech Oak

Oak

Iroko

Scots Pine

Walnut

range of durability results

MOSO® Bamboo N-durance Ipé

Ipé

EN-2022-01

(CEN/TS 15083-1)

class 1 use/risk class EN 335

class 4

Natural durability sufficient. Natural durability normally sufficient, but for certain end uses treatment may be advisable. Natural durability may be sufficient, but depending on end use, preservative treatment may be necessary. Preservative treatment is normally advisable. Preservative treatment necessary. Natural durability of Bamboo N-durance not tested in salt water.

MOSO® Bamboo N-durance

EN 350 / EN 113-2

1. very durable

Birch Pine

durability EN 350 / CEN/TS 15083-2 EN 350 / EN 113-2 (CEN/TS 15083-1)

class 1

resistance against surface fungi EN ISO 846:2019 resistant to wooddiscolouring moulds

class 0

fire resistance EN 13501-1 decking

class Bfl-s1

EN-2022-01

Test results from EPH (Entwicklungs- und Prüflabor Holztechnologie GmbH) and Efectis.

Bamboo N-durance: the sustainable choice MOSO® Bamboo N-durance offers sustainable advantages. The inclusion of Bamboo N-durance contributes to a higher LEED, BREEAM, Green Star, HQE and DGNB certification score for green building projects. That’s one of the reasons why you can find MOSO® Bamboo N-durance and other MOSO® products in many sustainable reference projects all over the world.

unsurpassed growing speed bamboo: the fastest growing plant in the world Because of the fast growth, Moso bamboo is managed as an agricultural crop: the annual harvest of the 4 to 5-year-old stems – compared to 60-80 years for tropical hardwood! - provides a steady annual income to farmers and stimulates the bamboo plant to reproduce even faster. Therefore, by default, no deforestation occurs with production of MOSO® Bamboo N-durance, while large amounts of CO2 are captured in the bamboo forests and products (www.inbar.int/understandingbamboos-climate-change-potential).

Moso bamboo Eucalyptus Beech Teak Oak

harvesting age (years)

 www.moso-bamboo.com/sustainability

carbon storage in bamboo biobased materials act as CO2 sinks Through photosynthesis, plants absorb carbon dioxide (CO2) and convert it into glucose (building block for biomass) and oxygen. The CO2 is stored in the material for the lifetime of the product, and even longer if the product is recycled into new, durable products. Due to the fast growth – and related high yields - Moso bamboo locks far more CO2 in durable products compared to wood species. The locked amount of CO2 can be calculated rather simply by looking at the density of the material and taking into account the biobased content. For example, Bamboo N-durance locks 1.635 kg CO2 per m3 of bamboo, which is the equivalent to the CO2 emitted by a mid-range car after 13.750 km driven.

Check out how bamboo can save the world at: www.mosobamboo.com/ sustainability

Discover the full range of

MOSO® Bamboo Outdoor

Ron Turner Studios

Private Residence Candlewood Lake - Bamboo X-treme® Decking installed next to the water and just above the ground requires a very stable decking material - (55 m2) Mount Gilead, Ohio, United States of America

BRT Architecten

Oxygen La Défense Paris - Bamboo X-treme® Outdoor Beams installed on a façade with different lengths and thicknesses (5500 m) Paris, France

Awood Ronnie Zeemering

Stéphane Malka

Notiz Hotel NHL Stenden - Bamboo X-treme® Cladding installed to reflect the “dressing” of a chocolate cake - (1200 m2) Leeuwarden, The Netherlands

David Ducastel (Philéas Fotos)

 www.moso-bamboo.com/moso

about MOSO Endless possibilities with MOSO® Bamboo Products: MOSO® develops and creates bamboo products for interior and exterior applications that meet the highest technical requirements and quality standards, enhance the beauty of applications and are made from the sustainable, renewable resource: Moso bamboo. MOSO® Products can be divided into four product groups:

MOSO® Bamboo Outdoor

MOSO® Bamboo Flooring

By using unique production processes the material is made suitable for many exterior applications, such as decking, cladding, fencing, and furniture.

A complete range of flooring types with multiple variations in size, colour and style, thus providing dozens of different bamboo flooring possibilities for each application (ranging from residential to commercial).

Sheryl Leysner Peter Tijhuis

MOSO® Bamboo Beam, Panel & Veneer

MOSO® Bamboo Unlimited

A very broad assortment in various sizes, colours and styles, offering solutions for indoor decoration (walls, ceilings, furniture, doors, etc) and (semi-) structural applications (window frames, curtain walls, etc).

Unique solutions to meet exceptionally high requirements from project partners and customised solutions for industrial clients like MOSO® Veneer for BMW car interiors, MOSO® Outdoor Beams for Erlau outdoor furniture, MOSO® Panels for HR Groep traffic signs and MOSO® Jacking Beams for Mammoet.

Hufton+Crow Hufton+Crow

There is no other company worldwide with an equal – and still expanding broad assortment in high quality bamboo products, permanently available from stock either in Barcelona (office MOSO Europe), Milan (office MOSO Italy), Cape Town / Johannesburg (office MOSO Africa), Worcester (office MOSO USA), Dubai (office MOSO Middle East), Hangzhou (office MOSO China) or at the main office near Amsterdam (MOSO International). Furthermore, MOSO® works with several partner companies and leading distributors worldwide to guarantee the availability of MOSO® products in each region. Furthermore, because of its expertise, MOSO® is able to develop unique, customized bamboo solutions for industrial clients meeting exceptionally stringent requirements. Through its experience, innovative attitude and world-wide network, MOSO® is recognised as the global A-brand in bamboo products. The proof is the impressive list of references and clients such as Madrid Airport, BMW, AkzoNobel, Texaco, Guggenheim Museum, Rabobank, United Nations (FAO), Iberostar and CitizenM Hotels. For an overview of our references and clients please refer to our website: www.moso-bamboo.com/ bamboo-inspiration

Rogers Stirk Harbour + Partners – Estudio Lamela Arquitectos

Unsere Modelle sind mit 860 mm Normbreite | 2110 mm Normhöhe abgebildet. Bitte beachten Sie mögliche optische Veränderungen bei anderen gewünschten Türmaßen. Farb- und Strukturabweichungen sind durch die drucktechnische Wiedergabe möglich. Bilder: GRAUTHOFF Türengruppe GmbH, AdobeStock.com Irrtümer und technische Änderungen vorbehalten. Die smart2kante ist ein innovatives Lizenzprodukt.

Ihr Fachhändler Holzland Köster Industriestraße 3 31138 Emmerke Telefon: 05121 9302-0 info@holzland-koester.de www.holzland-koester.de Öffnungszeiten Mo – Fr 7 – 18 Uhr Sa 8 – 14 Uhr

Headquarters:

ist eine Produktmarke der

Moso International B.V. GRAUTHOFF Türengruppe Adam Smithweg 2 Standort Mastholte 1689 ZW Zwaag The Netherlands Brandstraße 71-79 T: +31 (0)229 265 732 33397 Rietberg info@moso.eu

Spain, France, Portugal, North Africa, Latin America and Middle East:

Moso Europe S.L.U. GRAUTHOFF Türengruppe GmbH GmbH C/ Pau Claris, 83 - Principal 2ª 08010 Barcelona Standort Güsten Spain Astra Straße 1–8 T: +34 (0)93 574 9610 39439 Güsten contact@moso.eu

fon +49 (0) 39262 . 84-0 fax +49 (0) 39262 . 219

fon +49 (0) 2944 . 803-0 fax +49 (0) 2944 . 803-29 info@grauthoff.com North America:

info@grauthoff.com Sub-Saharan Africa:

Moso North America Inc. PO Box 793, 1741 Valley Forge Road Worcester, PA 19490 United States of America T: +1 855 343 8444 info@moso-bamboo.com

Moso Africa Pty. Ltd.

Gulf Cooperation Council (GCC) Countries:

Italy:

Moso Middle East LLC Al Jafla-B, Ras Al Khor Industrial 1 P.O. Box: 384421, Dubai United Arab Emirates T: +971 4 258 9337 contact@moso.ae

Moso Italia S.R.L Via Antonio Locatelli 86 20853 Biassono (MB) Italy T: +39 (0)39 900 5440 mosoitalia@moso.eu

Glosderry Road Kenilworth www.grauthoff.com 77708 Cape Town

South Africa T: +27 2167 11214 contact@moso-bamboo.co.za

MOSO®

EN-2022