HIGH AESTHETICS FOUR COLOUR-STABLE SHADES & MATCHING TRY-IN PASTES With a shade matching individual requirements, lifelike results are easily obtained. Additionally, PANAVIA™ V5 Try-In Paste match PANAVIA™ Veneer LC shades and allow for a simulation of the final appearance. PANAVIA™ Veneer LC Paste
Clear
Universal
PANAVIA™ V5 Try-in Paste
White
Brown
Clear
Universal
White
Brown
MINIMAL FILM THICKNESS Thanks to its flowability and low film thickness, PANAVIA™ Veneer LC produces a thin evenly distributed cement layer contributing to easy seating without interference and to highly aesthetic margins. GREAT POLISHABILITY AND GLOSS RETENTION Change in glossiness due to toothbrush abrasion test. High gloss durability (gloss retention) thanks to a high density of fine fillers. (%) 70 60 50 40 30 20 10 0
GLOSS RETENTION
0
10,000 20,000 40,000 Toothbrush wear
(%) 70 60 50 40 30 20 10 0
GLOSS RETENTION
0
10,000 20,000 30,000 Toothbrush wear
PANAVIA™ Veneer LC Competitor A Competitor B
40,000
The veneer specialist mastering highly aesthetic cementation
Test Conditions: Specimen ø10mm, thickness 2mm. After smoothing the surface with water-resistant abrasive paper of #1000 to #2500, final polishing with lapping film. Initial value (measure the gloss level after polishing*). Toothbrush wear (measured after 40,000 strokes with 250g load, 30 strokes/ minute, 10 wt% toothpaste*). Measured with a glossmeter VG 2000 (Nippon Denshoku Kogyo) at an angle of 60°. Note: Values may vary depending on measuring conditions.
Innovative curing technology Optimised handling High aesthetics
Source: Kuraray Noritake Dental Inc.
CLINICAL CASE Courtesy of Dr. Sato
Initial status before six veneers preparation (from #13 to #23).
PANAVIA™ Veneer LC excellent consistency and paste viscosity allowed for easier dispensing, seating and excess cement removal.
Light-cure of each area and margins.
Final result after cementation of six veneers of KATANA™ Zirconia STML. Please refer to the Instructions for Use for detailed instructions.
ORDER INFORMATION PANAVIA™ Veneer LC Standard Kit #4500-WD Standard Kit Universal (A2) #4501-WD Standard Kit Clear Standard Kit contains: • Paste 2.6 g (1.5 ml) x 1 • PANAVIA™ V5 Try-in Paste 2.4 g (1.8 ml) x 1 • PANAVIA™ V5 Tooth Primer 2 ml x 1 • CLEARFIL™ CERAMIC PRIMER PLUS 2 ml x 1 • K-ETCHANT Syringe 3 ml x 1 • Accessories Applicator tip (16G) 5 pcs, Applicator brushes (fine <silver>) 50 pcs Mixing dish (PN) 1 pc, Needle tip (E) 20 pcs
1621 Sakazu, Kurashiki, Okayama 710-0801, Japan Website
www.kuraraynoritake.com
PANAVIA™ Veneer LC Paste (2.6g/1.5ml)
PANAVIA™ V5 Try-In Paste (1.8ml)
#4505-WD Paste Universal (A2) #4506-WD Paste Clear #4507-WD Paste Brown (A4) #4508-WD Paste White
#3621-WD Universal (A2) #3622-WD Clear #3623-WD Brown (A4) #3624-WD White
PANAVIA™ Veneer LC Applicator tip (20 pcs)
Others
#4513-WD PANAVIA™ Veneer LC Applicator tip (16G)
#3637-WD CLEARFIL™ CERAMIC PRIMER PLUS (4ml) #3635-WD PANAVIA™ V5 Tooth Primer (4ml)
• Before using this product, be sure to read the Instructions for Use supplied with the product. • The specifications and appearance of the product are subject to change without notice. • Printed colour can be slightly different from actual colour. “KATANA” is a trademark or registered trademark of NORITAKE CO., LIMITED. “PANAVIA” and “CLEARFIL” are trademarks or registered trademarks of KURARAY CO., LTD.
CW15-01 10/2022
www.kuraraynoritake.com