One single procedure for your crown cementations Zirconia, Lithium Disilicate or Metal. No primers required. One single procedure regardless of the restorative material. Automix
Conditioning the crown.*
Apply the cement to the crown.
* Refer to “Conditioning the prosthetic restoration”.
5 min.
Light
2-5 sec. Chemical 2-4 min.
Place the crown.
Light-cure for 2 to 5 seconds or chemical-cure for 2 to 4 minutes, then remove the excess cement.
Conditioning the prosthetic restoration
Follow the instructions for use of the restoration material. In the absence of specific instructions. we recommend the following procedure:
Hydrofluoric acid
Lithium Disilicate
Maintain isolation for 5 minutes.* * For a translucent restoration, light-cure.
or
Apply hydrofluoric acid, then rinse with water and dry.
Metal oxide ceramic (e.g. Zirconia),
or
Composite resin
Metal
Blast 0.1 - 0.2 MPa Blast with alumina powder (30~50 µm), then ultrasonic clean and dry.
NO PRIMERS REQUIRED
Blast 0.1 - 0.4 MPa
Simple, Clean and Versatile
Blast with alumina powder (30~50 µm), then ultrasonic clean and dry.
PANAVIA™ SA Cement Universal Automix ・Universal (A2) ・White ・Translucent Content: 1 syringe: Paste A and B: 8.2 g (4.6 mL), Mixing Tip: 20 tips
1621 Sakazu, Kurashiki, Okayama 710-0801, Japan Website
www.kuraraynoritake.com
• Before using this product, be sure to read the Instructions for Use supplied with the product. • The specifications and appearance of the product are subject to change without notice. • Printed colour can be slightly different from actual colour. “PANAVIA”, “AVENCIA” and “CLEARFIL” are trademarks of KURARAY CO., LTD “KATANA” is a trademark of NORITAKE CO., LIMITED.
OST-027 IM19-01 07/2019
www. kuraraynoritake. com