SEBM034604
Shop Manual
WHEEL LOADER SERIAL NUMBERS
WA320-5 WA320L-5
60001 and up 60001 and up
This material is proprietary to Komatsu America Corp. and is not to be reproduced, used, or disclosed except in accordance with written authorization from Komatsu America Corp.. It is our policy to improve our products whenever it is possible and practical to do so. We reserve the right to make changes or improvements at any time without incurring any obligation to install such changes on products sold previously. Due to this continuous program of research and development, revisions may be made to this publication. It is recommended that customers contact their distributor for information on the latest revision.
Copyright 2005Komatsu Printed in U.S.A. Komatsu America Corp. April 2005
CONTENTS No. of page
01
GENERAL ......................................................................................... 01-1
10
STRUCTURE, FUNCTION AND MAINTENANCE STANDARD ...... 10-1
20
TESTING AND ADJUSTING ..............................................................20-1
30
DISASSEMBLY AND ASSEMBLY .....................................................30-1
90
OTHERS ............................................................................................ 90-1
00-2 (4)
WA320-5
The affected pages are indicated by the use of the following marks. It is requested that necessary actions must be taken to these pages according to the list below.
Mark
Indication
Action required
Q
Page to be newly added
Add
q
Page to be replaced
Replace
Page to be deleted
Discard
(
)
Pages having no marks are not revised at this time.
LIST OF REVISED PAGES Revision number
Mark
Pages
q q q q q q q q q q q q q q q q q q q q q q q q q
00- 1 00- 2 00- 2-1 00- 2-2 00- 2-3 00- 3 00- 4 00- 5 00- 6 00- 7 00- 8 00- 9 00- 10 00- 11 00- 12 00- 13 00- 14 00- 15 00- 16 00- 17 00- 18 00- 19 00- 20 00- 21 00- 22
q
q
01- 1 01- 2 01- 3 01- 4 01- 5 01- 6 01- 7 01- 8 01- 9 (01-10) (01-11) 1010101010-
WA320-5
1 2 3 4 5
(4) (4) (4) (4) (4)
(3) (3) (4)
(3) (4)
(3)
Mark
Pages
10- 6 10- 7 10- 8 10- 9 10- 10 10- 11 10- 12 10- 13 10- 14 10- 15 10- 16 10- 17 10- 18 10- 19 10- 20 10- 21 10- 22 10- 23 10- 24 10- 25 10- 26 10- 27 10- 28 10- 29 10- 30 10- 31 10- 32 10- 33 10- 34 10- 35 10- 36 10- 37 10- 38 10- 40 10- 41 10- 42 10- 43 10- 44 10- 46 10- 47 10- 48 10- 49 10- 50
Revision number
(3)
(3) (3)
Mark
Pages
10- 51 10- 52 10- 53 10- 54 10- 55 10- 56 10- 57 10- 58 10- 59 10- 60 10- 61 10- 62 10- 63 10- 64 10- 65 10- 66 10- 67 10- 68 10- 69 10- 70 10- 71 10- 72 10- 73 10- 74 10- 75 10- 76 10- 77 10- 78 10- 79 10- 80 10- 81 10- 82 10- 84 10- 85 10- 86 10- 87 10- 88 10- 90 10- 91 10- 92 10- 93 10- 94 10- 95
Revision number
Mark
q
Pages
10- 96 10- 97 10- 98 10-100 10-101 10-102 10-103 10-104 10-105 10-106 10-107 10-108 10-109 10- 110 10- 111 10- 113 10- 114 10- 115 10- 117 10- 118 10- 119 10-120 10-121 10-122 10-124 10-125 10-126 10-127 10-128 10-129 10-130 10-131 10-132 10-133 10-134 10-135 10-136 10-137 10-138 10-139 10-140 10-141 10-142
Revision number
(4)
Mark
Revision number
Pages
10-143 10-144 10-145 10-146 10-147 10-148 10-149 10-150 10-151 10-152 10-154 10-155 10-156 10-157 10-158 10-159 10-160 10-161 10-162 10-163 10-164 10-165 10-166 10-167 10-168 10-169 10-170 10-172 10-173 10-174 10-175 10-176 10-177 10-178 10-179 10-180 10-181 10-182 10-183 10-184 10-185 10-186 10-187
(3)
(3) (3)
(3) (3) (3)
(3)
00-2-1 (4)
Mark
Pages
10-188 10-189 10-190 10-191 10-192 10-193 10-194 10-195 10-196 10-197 10-198 10-199 10-200 10-201 10-202 10-203 10-204 10-205 10-206 10-207 10-208 10-209 10-210 10- 211 10-212 10-213 10-214 10-215 10-216 10-217 10-218 10-219
(3)
20- 1 20- 2 20- 3 20- 4 20- 5 20- 6 20-101 20-102 20-103 20-104 20-105 20-106 20-107 20-108 20-109 20- 110 20- 111 20- 112 20- 113 20- 114 20- 115 20- 116 20- 117 20- 118 20- 119 20-120 20-121
(1) (1) (3) (3) (2) (1) (2) (3) (3) (3) (3) (3) (3) (3) (3) (1) (3) (1) (1) (1) (1) (1) (1) (2) (2) (1) (3)
00-2-2 (4)
Revision number
(3) (3) (3)
Mark
q
Pages
Revision number
20-122 20-123 20-124 20-125 20-126 20-127 20-128 20-129 20-130 20-131 20-132 20-133 20-134 20-135 20-136 20-137 20-138 20-139 20-140 20-141 20-142 20-143 20-144 20-145 20-146 20-147 20-148 20-149 20-150 20-151 20-152 20-153 20-154 20-155 20-156 20-157 20-158 20-159 20-160 20-161 20-162 20-163 20-164 20-165 20-166 20-167 20-201 20-202 20-203 20-204 20-205 20-206 20-207 20-208 20-209 20-210 20- 211 20-212 20-213 20-214
(3) (3) (1) (3) (3) (1) (1) (3) (3) (1) (4) (1) (1) (1) (1) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (3) (1) (1) (1) (3) (1) (1) (2) (3) (3) (1) (3) (3) (3) (1) (3) (3) (3) (3) (3) (1) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (3)
Mark
Pages
Revision number
20-215 20-216 20-217 20-218 20-219 20-220 20-221 20-222 20-223 20-224 20-225 20-226 20-227 20-228 20-229 20-230 20-231 20-232 20-233 20-234 20-235 20-236 20-237 20-237-1 20-238 20-239 20-240 20-241 20-242 20-243 20-244 20-245 20-246 20-247 20-248 20-249 20-250 20-251 20-252 20-301 20-302 20-303 20-304 20-305 20-306 20-307 20-308 20-309 20-310 20-312 20-313 20-314 20-315 20-316 20-317 20-318 20-319 20-320 20-321 20-322
(2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (1) (1) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (1) (1) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2)
Mark
Pages
Revision number
q q q
20-324 20-325 20-326 20-327 20-328 20-329 20-351 20-352 20-353 20-354 20-355 20-356 20-357 20-401 20-402 20-404 20-405 20-406 20-407 20-408 20-409 20-410 20- 411 20-412 20-414 20-415 20-416 20-417 20-418 20-419 20-420 20-421 20-422 20-423 20-424 20-425 20-426 20-428 20-429 20-430 20-431 20-432 20-433 20-434 20-435 20-436 20-437 20-438 20-439 20-440 20-441 20-442 20-444 20-445 20-446 20-447 20-448 20-449 20-450 20-451
(2) (2) (2) (2) (2) (2) (2) (3) (2) (2) (2) (2) (2) (3) (1) (2) (2) (2) (1) (1) (1) (1) (3) (1) (1) (1) (1) (1) (1) (1) (3) (1) (1) (1) (1) (1) (1) (3) (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (2) (4) (4) (4)
Mark
Pages
Revision number
q
20-452 20-453 20-454 20-455 20-456 20-457 20-458 20-460 20-461 20-462 20-464 20-465 20-466 20-501 20-502 20-503 20-504 20-506 20-507 20-508 20-509 20-510 20- 511 20-512 20-513 20-514 20-515 20-516 20-517 20-518 20-520 20-521 20-522 20-523 20-524 20-525 20-526 20-528 20-529 20-530 20-531 20-532 20-533 20-534 20-535 20-536 20-537 20-538 20-539 20-540 20-542 20-543 20-544 20-545 20-546 20-548 20-549 20-550 20-551 20-552
(4) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2)
WA320-5
Mark
Pages
Revision number
20-554 20-555 20-556 20-557 20-558 20-559 20-560 20-561 20-562 20-563 20-564 20-565 20-566 20-567 20-568 20-569 20-570 20-571 20-572 20-573 20-601 20-602 20-603 20-604 20-605 20-606 20-607 20-608 20-609 20-610 20- 611 20-612 20-613 20-614 20-615 20-616 20-617 20-618 20-619 20-620 20-621 20-622 20-623 20-624 20-701 20-702 20-703 20-704 20-705 20-706 20-707 20-708 20-709 20-710 20- 711 20-712 20-713 20-714 20-715 20-716 20-717
(2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (1) (1) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (1) (1) (2) (2) (1) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1)
WA320-5
Mark
Pages
Revision number
20-718 20-719 20-720 20-721 20-722 20-723 20-724
(1) (1) (1) (1) (3) (1) (1)
30- 1 30- 2 30- 3 30- 4 30- 5 30- 6 30- 7 30- 8 30- 9 30- 10 30- 11 30- 12 30- 13 30-13-1 30- 14 30- 15 30- 16 30- 17 30- 18 30- 19 30- 20 30- 21 30- 22 30- 23 30- 24 30- 25 30- 26 30- 27 30- 28 30- 29 30- 30 30- 31 30- 32 30- 33 30- 34 30- 35 30- 36 30- 37 30- 38 30- 39 30- 40 30- 41 30- 42 30- 43 30- 44 30- 45 30- 46 30- 47 30- 48 30- 49 30- 50 30- 51 30- 52
(2) (1) (1) (1) (1) (1) (2) (2) (1) (1) (1) (1) (1) (2) (1) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1)
Mark
Pages
Revision number
30- 53 30- 54 30- 55 30- 56 30- 57 30- 58 30- 59 30- 60 30- 61 30- 62 30- 63 30- 64 30- 65 30- 66 30- 67 30- 68 30- 69 30- 70 30- 71 30- 72 30- 73 30- 74 30- 75 30- 76 30- 77 30- 78 30- 79 30- 80 30- 81 30- 82 30- 83 30- 84 30- 85 30- 86 30- 87 30- 88 30- 89 30- 90 30- 91 30- 92 30- 93 30- 94 30- 95 30- 96 30- 97 30- 98 30- 99 30-100 30-101 30-102 30-103 30-104 30-105 30-106 30-107 30-108 30-109 30- 110 30- 111 30- 112 30- 113
(1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (1) (1) (2) (1) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2)
Mark
Pages
Revision number
30- 114 30- 115 30- 116 30- 117 30- 118 30- 119 30-120 30-121 30-122 30-123 30-124 30-125 30-126 30-127 30-128 30-129 30-130 30-131 30-132 30-133 30-134 30-135 30-136 30-137 30-138 30-139 30-140 30-141 30-142 30-143 30-144 30-145 30-146 30-147 30-148 30-149 30-150 30-151 30-152 30-153 30-154 30-155 30-156 30-157 30-158 30-159 30-160 30-161 30-162 30-163 30-164 30-165 30-166 30-167 30-168 30-169 30-170 30-171 30-172 30-173 30-174
(2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (1) (1) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (1) (1)
Mark
q
Q Q
Pages
Revision number
30-175 30-176 30-177 30-178 30-179 30-180 30-181 30-182 30-183 30-184 30-185 30-186 30-187 30-188 30-189 30-190 30-191 30-192 30-193 30-194 30-195 30-196 30-197 30-198 30-199 30-200 30-201 30-202 30-203 30-204 30-205 30-206 30-207 30-208 30-209 30-210 30- 211 30-212 30-213 30-214 30-215 30-216 30-217 30-218 30-219 30-220
(1) (1) (2) (1) (1) (1) (1) (1) (1) (1) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (3) (3) (1) (1) (3) (1) (2) (2) (2) (2)
90- 1 90- 3 90- 5 90- 7 90- 9 90- 11 90- 13 90- 15 90- 17 90- 19 90- 21
(4) (3)
(4) (4)
00-2-3 (4)
This is the sample of the manual Click on the download link for complete manual
Download Link
SAFETY
SAFETY NOTICE
SAFETY
SAFETY NOTICE IMPORTANT SAFETY NOTICE Proper service and repair is extremely important for safe machine operation. The service and repair techniques recommended by Komatsu and described in this manual are both effective and safe. Some of these techniques require the use of tools specially designed by Komatsu for the specific purpose. To prevent injury to workers, the symbol k is used to mark safety precautions in this manual. The cautions accompanying these symbols should always be followed carefully. If any dangerous situation arises or may possibly arise, first consider safety, and take the necessary actions to deal with the situation.
GENERAL PRECAUTIONS Mistakes in operation are extremely dangerous. Read the Operation and Maintenance Manual carefully BEFORE operating the machine. 1. Before carrying out any greasing or repairs, read all the precautions given on the decals which are fixed to the machine. 2. When carrying out any operation, always wear safety shoes and helmet. Do not wear loose work clothes, or clothes with buttons missing.
Always wear safety glasses when hitting parts with a hammer. Always wear safety glasses when grinding parts with a grinder, etc.
3. If welding repairs are needed, always have a trained, experienced welder carry out the work. When carrying out welding work, always wear welding gloves, apron, hand shield, cap and other clothes suited for welding work. 4. When carrying out any operation with two or more workers, always agree on the operating procedure before starting. Always inform your fellow workers before starting any step of the operation. Before starting work, hang UNDER REPAIR signs on the controls in the operator's compartment. 5. Keep all tools in good condition and learn the correct way to use them.
6. Decide a place in the repair workshop to keep tools and removed parts. Always keep the tools and parts in their correct places. Always keep the work area clean and make sure that there is no dirt or oil on the floor. Smoke only in the areas provided for smoking. Never smoke while working. PREPARATIONS FOR WORK 7. Before adding oil or making any repairs, park the machine on hard, level ground, and block the wheels or tracks to prevent the machine from moving. 8. Before starting work, lower blade, ripper, bucket or any other work equipment to the ground. If this is not possible, insert the safety pin or use blocks to prevent the work equipment from falling. In addition, be sure to lock all the control levers and hang warning signs on them. 9. When disassembling or assembling, support the machine with blocks, jacks or stands before starting work. 10.Remove all mud and oil from the steps or other places used to get on and off the machine. Always use the handrails, ladders or steps when getting on or off the machine. Never jump on or off the machine. If it is impossible to use the handrails, ladders or steps, use a stand to provide safe footing.
00-3
SAFETY PRECAUTIONS DURING WORK 11. When removing the oil filler cap, drain plug or hydraulic pressure measuring plugs, loosen them slowly to prevent the oil from spurting out. Before disconnecting or removing components of the oil, water or air circuits, first remove the pressure completely from the circuit. 12.The water and oil in the circuits are hot when the engine is stopped, so be careful not to get burned. Wait for the oil and water to cool before carrying out any work on the oil or water circuits. 13.Before starting work, remove the leads from the battery. Always remove the lead from the negative ( ) terminal first. 14.When raising heavy components, use a hoist or crane. Check that the wire rope, chains and hooks are free from damage. Always use lifting equipment which has ample capacity. Install the lifting equipment at the correct places. Use a hoist or crane and operate slowly to prevent the component from hitting any other part. Do not work with any part still raised by the hoist or crane. 15.When removing covers which are under internal pressure or under pressure from a spring, always leave two bolts in position on opposite sides. Slowly release the pressure, then slowly loosen the bolts to remove. 16.When removing components, be careful not to break or damage the wiring. Damaged wiring may cause electrical fires. 17.When removing piping, stop the fuel or oil from spilling out. If any fuel or oil drips onto the floor, wipe it up immediately. Fuel or oil on the floor can cause you to slip, or can even start fires. 18.As a general rule, do not use gasoline to wash parts. In particular, use only the minimum of gasoline when washing electrical parts.
00-4
SAFETY NOTICE 19.Be sure to assemble all parts again in their original places. Replace any damaged parts with new parts. When installing hoses and wires, be sure that they will not be damaged by contact with other parts when the machine is being operated. 20.When installing high pressure hoses, make sure that they are not twisted. Damaged tubes are dangerous, so be extremely careful when installing tubes for high pressure circuits. Also, check that connecting parts are correctly installed. 21.When assembling or installing parts, always use the specified tightening torques. When installing protective parts such as guards, or parts which vibrate violently or rotate at high speed, be particularly careful to check that they are installed correctly. 22.When aligning two holes, never insert your fingers or hand. Be careful not to get your fingers caught in a hole. 23.When measuring hydraulic pressure, check that the measuring tool is correctly assembled before taking any measurements. 24.Take care when removing or installing the tracks of track-type machines. When removing the track, the track separates suddenly, so never let anyone stand at either end of the track.
FOREWORD
GENERAL
FOREWORD
GENERAL
This shop manual has been prepared as an aid to improve the quality of repairs by giving the serviceman an accurate understanding of the product and by showing him the correct way to perform repairs and make judgements. Make sure you understand the contents of this manual and use it to full effect at every opportunity.
This shop manual mainly contains the necessary technical information for operations performed in a service workshop. For ease of understanding, the manual is divided into the following chapters; these chapters are further divided into the each main group of components.
STRUCTURE AND FUNCTION This section explains the structure and function of each component. It serves not only to give an understanding of the structure, but also serves as reference material for troubleshooting. In addition, this section may contain hydraulic circuit diagrams, electric circuit diagrams, and maintenance standards. TESTING AND ADJUSTING This section explains checks to be made before and after performing repairs, as well as adjustments to be made at completion of the checks and repairs. Troubleshooting charts correlating "Problems" with "Causes" are also included in this section. DISASSEMBLY AND ASSEMBLY This section explains the procedures for removing, installing, disassembling and assembling each component, as well as precautions for them. MAINTENANCE STANDARD This section gives the judgment standards for inspection of disassembled parts. The contents of this section may be described in STRUCTURE AND FUNCTION. OTHERS This section mainly gives hydraulic circuit diagrams and electric circuit diagrams. In addition, this section may give the specifications of attachments and options together.
NOTICE The specifications contained in this shop manual are subject to change at any time and without any advance notice. Use the specifications given in the book with the latest date.
00-5
FOREWORD
HOW TO READ THE SHOP MANUAL
HOW TO READ THE SHOP MANUAL
REVISED EDITION MARK
VOLUMES Shop manuals are issued as a guide to carrying out repairs. They are divided as follows:
When a manual is re vised , a n edition mark ((1)(2)(3)....) is recorded on the bottom of the pages.
Chassis volume: Issued for every machine model Engine volume: Issued for each engine series Each issued as one Electrical volume: Attachments volume: · volume to cover all models
REVISIONS
}
These various volumes are designed to avoid duplicating the same information. Therefore, to deal with all repairs for any model , it is necessary that chassis, engine, electrical and attachment volumes be available. DISTRIBUTION AND UPDATING Any additions, amendments or other changes will be sent to KOMATSU distributors. Get the most up-todate information before you start any work. FILING METHOD 1. See the page number on the bottom of the page. File the pages in correct order. 2. Following examples show how to read the page number. Example 1 (Chassis volume): 10 - 3 Item number (10. Structure and Function) Consecutive page number for each item. Example 2 (Engine volume): 12 - 5 Unit number (1. Engine) Item number (2. Testing and Adjusting) Consecutive page number for each item. 3. Additional pages: Additional pages are indicated by a hyphen (-) and number after the page number. File as in the example. Example: 12-203 10-4 12-203-1 10-4-1 Added pages 12-203-2 10-4-2 12-204 10-5
00-6
Revised pages are shown in the LIST OF REVISED PAGES next to the CONTENTS page. SYMBOLS So that the shop manual can be of ample practical use, important safety and quality portions are marked with the following symbols.
Symbol
Item
Remarks
k
Safety
Special safety precautions are necessary when performing the work.
Caution
Special technical precautions or other precautions for preserving standards are necessary when performing the work.
4
Weight
Weight of parts of systems. Caution necessary when selecting hoisting wire, or when working posture is important, etc.
3
Tightening torque
Places that require special attention for the tightening torque during assembly.
2
Coat
Places to be coated with adhesives and lubricants, etc.
5
Oil, water
Places where oil, water or fuel must be added, and the capacity.
6
Drain
Places where oil or water m us t b e d r a in e d , a n d quantity to be drained.
a
FOREWORD
HOISTING INSTRUCTIONS
HOISTING INSTRUCTIONS HOISTING k Heavy parts (25 kg or more) must be lifted with a hoist, etc. In the DISASSEMBLY AND ASSEMBLY section, every part weighing 25 kg or more is indicated clearly with the symbol 4
If a part cannot be smoothly removed from the machine by hoisting, the following checks should be made: 1) Check for removal of all bolts fastening the part to the relative parts. 2) Check for existence of another part causing interference with the part to be removed.
WIRE ROPES 1) Use adequate ropes depending on the weight of parts to be hoisted, referring to the table below: Wire ropes (Standard "Z" or "S" twist ropes without galvanizing) Rope diameter
Allowable load
mm
kN
tons
10 11.5 12.5 14 16 18 20 22.4 30 40 50 60
9.8 13.7 15.7 21.6 27.5 35.3 43.1 54.9 98.1 176.5 274.6 392.2
1.0 1.4 1.6 2.2 2.8 3.6 4.4 5.6 10.0 18.0 28.0 40.0
Slinging near the edge of the hook may cause the rope to slip off the hook during hoisting, and a serious accident can result. Hooks have maximum strength at the middle portion.
3) Do not sling a heavy load with one rope alone, but sling with two or more ropes symmetrically wound onto the load. k Slinging with one rope may cause turning of the load during hoisting, untwisting of the rope, or slipping of the rope from its original winding position on the load, which can result in a dangerous accident. 4) Do not sling a heavy load with ropes forming a wide hanging angle from the hook. When hoisting a load with two or more ropes, the force subjected to each rope will increase with the hanging angles. The table below shows the variation of allowable load kN {kg} when hoisting is made with two ropes, each of which is allowed to sling up to 9.8 kN {1000 kg} vertically, at various hanging angles. When two ropes sling a load vertically, up to 19.6 kN {2000 kg} of total weight can be suspended. This weight becomes 9.8 kN {1000 kg} when two ropes make a 120° hanging angle. On the other hand, two ropes are subjected to an excessive force as large as 39.2 kN {4000 kg} if they sling a 19.6 kN {2000 kg} load at a lifting angle of 150°.
The allowable load value is estimated to be onesixth or one-seventh of the breaking strength of the rope used. 2) Sling wire ropes from the middle portion of the hook.
00-7
FOREWORD
METHOD OF DISASSEMBLING, CONNECTING PUSH-PULL TYPE COUPLER
METHOD OF DISASSEMBLING, CONNECTING PUSH-PULL TYPE COUPLER k Before carrying out the following work, release the residual pressure from the hydraulic tank. For details, see TESTING AND ADJUSTING, Releasing residual pressure from hydraulic tank.
k Even if the residual pressure is released from the hydraulic tank, some hydraulic oil flows out when the hose is disconnected. Accordingly, prepare an oil receiving container.
Disconnection 1) Release the residual pressure from the hydraulic tank. For details, see TESTI NG AND ADJUSTING, Releasing residual pressure from hydraulic tank. 2) Hold adapter (1) and push hose joint (2) into mating adapter (3). (See Fig. 1) The adapter can be pushed in about 3.5 mm. Do not hold rubber cap portion (4). 3) After hose joint (2) is pushed into adapter (3), press rubber cap portion (4) against (3) until it clicks. (See Fig. 2) 4) Hold hose adapter (1) or hose (5) and pull it out. (See Fig. 3) Since some hydraulic oil flows out, prepare an oil receiving container. Connection 1) Hold hose adapter (1) or hose (5) and insert it in mating adapter (3), aligning them with each other. (See Fig. 4) Do not hold rubber cap portion (4). 2) After inserting the hose in the mating adapter perfectly, pull it back to check its connecting condition. (See Fig. 5) When the hose is pulled back, the rubber cap portion moves toward the hose about 3.5 mm. This does not indicate abnormality, however.
00-8
Type 1
FOREWORD
METHOD OF DISASSEMBLING, CONNECTING PUSH-PULL TYPE COUPLER
Type 3
1) Hold the mouthpiece of the tightening portion and push body (2) in straight until sliding prevention ring (1) contacts contact surface a of the hexagonal portion at the male end.
1) Hold the mouthpiece of the tightening portion and push body (2) in straight until sliding prevention ring (1) contacts contact surface a of the hexagonal portion at the male end.
2) Hold in the condition in Step 1), and turn lever (4) to the right (clockwise).
2) Hold in the condition in Step 1), and push until cover (3) contacts contact surface a of the hexagonal portion at the male end.
3) Hold in the condition in Steps 1) and 2), and pull out whole body (2) to disconnect it.
3) Hold in the condition in Steps 1) and 2), and pull out whole body (2) to disconnect it.
Disassembly
Type 2
Hold the mouthpiece of the tightening portion and push body (2) in straight until sliding prevention ring (1) contacts contact surface a of the hexagonal portion at the male end to connect it.
Connection
Hold the mouthpiece of the tightening portion and push body (2) in straight until sliding prevention ring (1) contacts contact surface a of the hexagonal portion at the male end to connect it.
00-9
FOREWORD
COATING MATERIALS
COATING MATERIALS The recommended coating materials such as adhesives, gasket sealants and greases used for disassembly and assembly are listed below. For coating materials not listed below, use the equivalent of products shown in this list. Category
Komatsu code
Part No.
LT-1A
790-129-9030
LT-1B
790-129-9050
LT-2
09940-00030
LT-3
790-129-9060 (Set of adhesive and hardening agent)
LT-4
790-129-9040
Holtz MH 705
790-126-9120
Three bond 1735
790-129-9140
Aron-alpha 201
790-129-9130
Loctite 648-50
79A-129-9110
LG-1
790-129-9010
LG-5
790-129-9080
LG-6
790-129-9020
LG-7
790-129-9070
Three bond 1211
790-129-9090
Three bond 1207B
419-15-18131
Adhesives
Gasket sealant
00-10
Q ty
Container
Main applications, features
Used to prevent rubber gaskets, rubber cushions, and cock plug from coming out. Used in places requiring an immediately effective, strong adhesive. 20 g Polyethylene Used for plastics (except polyethylene, (2 pcs.) container polyprophylene, tetrafluoroethlene and vinyl chloride), rubber, metal and nonmetal. Features: Polyethylene Resistance to heat and chemicals 50 g container Used for anti-loosening and sealant purpose for bolts and plugs. Adhesive: Used as adhesive or sealant for metal, 1 kg glass and plastic. Hardening Can agent: 500 g Polyethylene Used as sealant for machined holes. 250 g container Used as heat-resisting sealant for 75 g Tube repairing engine. Quick hardening type adhesive Polyethylene Cure time: within 5 sec. to 3 min. 50 g container Used mainly for adhesion of metals, rubbers, plastics and woods. Quick hardening type adhesive Quick cure type Polyethylene 2g (max. strength after 30 minutes) container Used mainly for adhesion of rubbers, plastics and metals. Resistance to heat, chemicals Polyethylene 50 cc Used at joint portions subject to high container temperatures. Used as adhesive or sealant for gaskets 200 g Tube and packing of power train case, etc. Used as sealant for various threads, pipe joints, flanges. 1 kg Can Used as sealant for tapered plugs, elbows, nipples of hydraulic piping. Features: Silicon based, resistance to heat, cold 200 g Tube Used as sealant for flange surface, tread. Used as sealant for oil pan, final drive case, etc. Features: Silicon based, quick hardening type 1 kg Tube Used as sealant for flywheel housing, intake manifold, oil pan, thermostat housing, etc. Used as heat-resisting sealant for 100 g Tube repairing engine. Features: Silicone type, heat resistant, vibration resistant, and impact resistant 100 g Tube sealing material Used as sealing material for transfer case 150 g
Tube
FOREWORD
Molybdenum disulphide lubricant
Komatsu code
Part No.
Q ty
Container
LM-G
09940-00051
60 g
Can
LM-P
09940-00040
200 g
Tube
Various
Various
G2-LI
G2-CA
Grease
Primer
Molybdenum disulphide grease LM-G (G2-M) Hyper White Grease G2-T G0-T (*) *: For use in cold district Biogrease G2B G2-BT (*) *: For high temperature and large load SUNSTAR PAINT PRIMER 580 SUPER SUNSTAR GLASS PRIMER 580 SUPER SUNSTAR PAINT PRIMER 435-95 SUNSTAR GLASS PRIMER 435-41
Adhesive
Caulking material
SUNSTAR SASH PRIMER GP-402 SUNSTAR PENGUINE SUPER 560 SUNSTAR PENGUINE SEAL 580 SUPER S or W Sika Japan, Sikaflex 256HV SUNSTAR PENGUINE SEAL No. 2505 SEKISUI SILICONE SEALANT GE TOSHIBA SILICONES TOSSEAL 381
SYG2-400LI SYG2-350LI SYG2-400LI-A SYG2-160LI SYGA-160CNLI SYG2-400CA SYG2-350CA SYG2-400CA-A SYG2-160CA SYGA-160CNCA SYG2-400M SYG2-400M-A SYGA-16CNM
Various
Various
400 g × 10 Bellows type 400 g × 20 Bellows type 16 kg Can
Used as lubricant for sliding portion (to prevent from squeaking). Used to prevent seizure or scuffling of the thread when press fitting or shrink fitting. Used as lubricant for linkage, bearings, etc. General purpose type
Used for normal temperature, light load bearing at places in contact with water or steam. Used for heavy load portion
Seizure resistance and heat resistance higher than molybdenum disulfide grease Bellows type Since this grease is white, it does not Can stand out against machine body.
SYG2-400T-A SYG2-16CNT SYG0-400T-A (*) SYG0-16CNT (*)
400 g 16 kg
SYG2-400B SYGA-16CNB SYG2-400BT (*) SYGA-16CNBT (*)
400 g 16 kg
Bellows type Can
20 ml
Glass container
20 ml
Glass container
22M-54-27230
20 ml
Glass container
22M-54-27240
150 ml
Can
22M-54-27250
20 ml
Glass container
22M-54-27210
320 ml
Ecocart (Special container)
417-926-3910
320 ml
Polyethylene container
20Y-54-39850
310 ml
Polyethylene container
417-926-3920
320 ml
Polyethylene container
20Y-54-55130
333 ml
Polyethylene container
22M-54-27220
333 ml
Cartridge
417-926-3910
Main applications, features
Since this grease is decomposed by bacteria in short period, it has less effects on microorganisms, animals, and plants. Used as primer for cab side (Using limit: 4 months) Used as primer for glass side (Using limit: 4 months)
Adhesive for cab glass
Category
COATING MATERIALS
Used as primer for painted surface on cab side (Using limit: 4 months) Used as primer for black ceramiccoated surface on glass side and for hard polycarbonate-coated surface (Using limit: 4 months) Used as primer for sash (Alumite). (Using limit: 4 months) Used as adhesive for glass. (Using limit: 6 months) S is used for high-temperature season (April - October) and W for low-temperature season (November April) as adhesive for glass. (Using limit: 4 months) Used as adhesive for glass. (Using limit: 6 months) Used to seal joints of glass parts. (Using limit: 4 months) Used to seal front window. (Using limit: 6 months) Used to seal joint of glasses. Translucent white seal. (Using limit: 12 months)
00-11