CAT + Caterpillar R1600G Load Haul Dump Service Repair Manual

Note: Use Bookmarks panel to navigate











This is the sample of the manual click on the download link for complete manual

DOWNLOAD LINK

For some reason if link does not work download this pdf and then click

Product: LOAD HAUL DUMP

Model: R1600G LOAD HAUL DUMP 9YZ

Configuration: R1600G Load Haul Dump 9YZ00001-UP (MACHINE) POWERED BY C11 Engine

Disassembly and Assembly

R1600G Load Haul Dump Power Train

Media Number -KENR6828-03

Axle Shaft - Install

Installation Procedure

Note:  Note:

 

Note:  

Product: LOAD HAUL DUMP

Model: R1600G LOAD HAUL DUMP 9YZ

Configuration: R1600G Load Haul Dump 9YZ00001-UP (MACHINE) POWERED BY C11 Engine

Disassembly and Assembly

R1600G Load Haul Dump Power Train

Media Number -KENR6828-03

Axle Shaft - Remove

Removal Procedure

Note: 

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.

Note:

Sat May 4 00:11:16 UTC+0530 2024

Product: LOAD HAUL DUMP

Model: R1600G LOAD HAUL DUMP 9YZ

Configuration: R1600G Load Haul Dump 9YZ00001-UP (MACHINE) POWERED BY C11 Engine

Disassembly and Assembly R1600G Load Haul Dump Power Train

Bucket Control Safety Pins - Remove and Install

Installation Procedure

No clearance for person in this area when bucket control group lowers. Severe injury or death from crushing could occur.

Install bucket control group safety pins before servicing machine in this area.

Remove safety pins and secure before resuming operation.

 

 

Removal Procedure

No clearance for person in this area when bucket control group lowers. Severe injury or death from crushing could occur.

Install bucket control group safety pins before servicing machine in this area.

Remove safety pins and secure before resuming operation.

 

 

Product: LOAD HAUL DUMP

Model: R1600G LOAD HAUL DUMP 9YZ

Configuration: R1600G Load Haul Dump 9YZ00001-UP (MACHINE) POWERED BY C11 Engine

Disassembly and Assembly

R1600G Load Haul Dump Power Train

Media Number -KENR6828-03

Differential - Assemble

Assembly Procedure

i02415212

      

A new differential group or a new case assembly will be equipped with bolts (1) and washers used for shipping, assembly, and

End By:

these bolts and washers after the bevel gear has been installed. These bolts and washers should not be used for final assembly.

Network For SIS Licensees.

Product: LOAD HAUL DUMP

Model: R1600G LOAD HAUL DUMP 9YZ

Configuration: R1600G Load Haul Dump 9YZ00001-UP (MACHINE) POWERED BY C11 Engine

Disassembly and Assembly R1600G Load Haul Dump Power Train

Media Number -KENR6828-03

Differential - Disassemble

Disassembly Procedure

Start By:

NOTICE

A new differential group or a new case assembly will be equipped with bolts (1) and washers used for shipping, assembly, and storage purposes only. Remove and discard

these bolts and washers after the bevel gear has been installed. These bolts and washers should not be used for final assembly.

Private Network For SIS Licensees. Sat May 4 00:17:12 UTC+0530 2024

Product: LOAD HAUL DUMP

Model: R1600G LOAD HAUL DUMP 9YZ

Configuration: R1600G Load Haul Dump 9YZ00001-UP (MACHINE) POWERED BY C11 Engine

Disassembly and Assembly

R1600G Load Haul Dump Power Train

Media Number -KENR6828-03

Differential and Bevel Gear - Install

SMCS

Installation Procedure

i02416781

 

 

NOTICE

A new differential group or a new case assembly will be equipped with bolts and washers used for shipping, assembly, and storage purposes only. Remove and discard these four bolts and washers after the bevel gear has been installed. These bolts and washers should not be used for final assembly.



Note: