CAT + Caterpillar 982M Wheel Loader Service Repair Manual

Note: Use Bookmarks panel to navigate





This is the sample of the manual click on the download link for complete manual

DOWNLOAD LINK

For some reason if link does not work download this pdf and then click

Product: WHEEL LOADER

Model: 982M WHEEL LOADER K1Y

Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine

Disassembly and Assembly 980M and 982M Wheel Loaders

i05292929

Aftercooler - Remove and Install SMCS

Removal Procedure

Start By:

Installation Procedure

Private Network For SIS Licensees. Thu Apr 14 19:45:55 UTC+0530 2022

Product: WHEEL LOADER

Model: 982M WHEEL LOADER K1Y

Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine

Disassembly and Assembly 980M and 982M Wheel Loaders

Media Number -UENR3093-03

Air Cleaner - Remove and Install

Removal Procedure

Always service the air cleaner from the right fender only. DO NOT stand on the undercarriage, belt, or ground to service the air cleaner. Personal injury could result.

-10/10/2017

i06838061

Installation Procedure

Product: WHEEL LOADER

Model: 982M WHEEL LOADER K1Y

Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine

Disassembly and Assembly 980M and 982M Wheel Loaders

i05288038

Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module

Removal Procedure

Installation Procedure 



 

Product: WHEEL LOADER

Model: 982M WHEEL LOADER K1Y

Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine

Disassembly and Assembly

980M and 982M Wheel Loaders

Alternator - Remove and Install SMCS

Removal Procedure

Personal injury can result from failure to disconnect the battery.

First, disconnect the negative battery cable. Then, disconnect the positive battery cable.

A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.

i05283350

 

Installation Procedure

Product: WHEEL LOADER

Model: 982M WHEEL LOADER K1Y

Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine

Disassembly and Assembly 980M and 982M Wheel Loaders

Batteries - Remove and Install

Removal Procedure

Accidental machine starting can cause injury or death to personnel working on the machine.

To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.

Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.

i05299979

Product: WHEEL LOADER

Model: 982M WHEEL LOADER K1Y

Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine

Disassembly and Assembly 980M and 982M Wheel Loaders

i05283333

Belt Tensioner - Remove and Install

Removal Procedure

Note: 



 

Installation Procedure

Private Network For SIS Licensees.

Product: WHEEL LOADER

Model: 982M WHEEL LOADER K1Y

Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine

Disassembly and Assembly 980M and 982M Wheel Loaders

Clean Emissions Module - Remove and Install

Removal Procedure

Hot

Wear goggles, gloves, protective clothing, and a National Institute for Occupational Safety and Health (NIOSH) approved P95 or N95 half-face respirator when handling a used Diesel Particulate Filter or Catalytic Converter Muffler. Failure to do so could result in personal injury.



Installation Procedure



Product: WHEEL LOADER

Model: 982M WHEEL LOADER K1Y

Configuration: 982M Wheel Loader K1Y00001-UP (MACHINE) POWERED BY C13 Engine

Disassembly and Assembly 980M and 982M Wheel Loaders Media Number -UENR3093-03

i05285217

Combustion Head - Remove and Install - Clean Emissions Module

Removal Procedure

Start By:

Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

 



Note: