Issuu

906K WHEEL LOADER

Printed by Heavy Equipment Manuals v2.20

Printed in U.S.A

Heavy Equipment Manuals













 



















































































































































































  Product: WHEEL LOADER Model: 906K WHEEL LOADER L66 Configuration: 906K Compact Wheel Loader L6600001-UP (MACHINE) POWERED BY C3.3B Engine

Disassembly and Assembly 906, 907 and 908 Compact Wheel Loaders Power Train Media Number -KENR5211-04

Publication Date -01/06/2012

Date Updated -26/04/2017

i02954908

Wheel and Brake Group (Front) (High Speed Axle) Disassemble SMCS - 4006-015-FR

Disassembly Procedure Table 1 Required Tools Tool

Part Number

Part Description

Qty

1P-0074

Slide Hammer

5F-7244

Puller Group

Start By: a. Remove the final drive planetary. Refer to Disassembly and Assembly Manual, "Final Drive Planetary".

Illustration 1

g01471752

1. Remove bolts (1).

Illustration 2

g01471773

2. Install two bolts (2), as shown above. Turn bolts (2) evenly in order to remove gear assembly (3).

This is the sample of the manual click on the download link for complete manual

DOWNLOAD LINK For some reason if link does not work download this pdf and then click

Illustration 3

3. Remove retaining ring (5). 4. Remove bushings (6). 5. Remove carrier wheel (7) from gear (4).

g01471774

Illustration 4

g01471776

6. Separate flange assembly (9) from brake shaft group (10). 7. Remove bearing cone (8).

Illustration 5

8. Remove bearing cone (11) from flange assembly (9).

g01472112

Illustration 6

g01471777

9. Remove seal (14). 10. Use Tooling (A) and (B) in order to remove bearing cups (12) and (13) from the flange assembly (9). Note: The springs are under pressure.

Illustration 7

g01507939

11. Remove six brake adjust kits (15). Remove brake piston (16).

Illustration 8

g01507962

12. Remove three pins (17) from the brake housing (18).

Illustration 9

g01507987

13. Remove seal (19) and (20) from the brake piston (16). 14. Repeat Step 1 through 13 for the other side. Copyright 1993 - 2021 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.

Mon Jun 7 12:24:39 UTC+0530 2021

Disassembly and Assembly 906, 907 and 908 Compact Wheel Loaders Power Train Media Number -KENR5211-04

Publication Date -01/06/2012

Date Updated -26/04/2017

i06904640

Transfer Drive Group (Hydrostatic) (High Speed) - Assemble SMCS - 3159-016-H7; 4350-016-HZ

Assembly Procedure Table 1 Required Tools Tools

Part Number

Part Description

Qty

439-3940

Bracket As

154-9731

Thread Lock Compound

4C-9506

Retaining Compound

Loctite 401 Bonder Adhesive

6V-2012

Depth Micrometer

6V-6640

Sealant

1P-0510

Driver Gp

Loctite 567

Illustration 1

g06159976

1. Raise the temperature of bearing (50) and install bearing (50) on shaft assembly (47).

Illustration 2

2. Install gear (49) and retaining ring (48).

g01662932

Illustration 3

g06159993

3. Install shaft assembly (47) through the top of the housing and position the bearing end through the correct opening.

Illustration 4

g06159323

4. Install bearing (45B) in cover (45).

Illustration 5

g06159305

5. Use Tooling (K) to install seal (45A) in cover (45).

Illustration 6

g01662927

6. Apply Tooling (J) to cover (45). Apply Tooling (M) to bolts (46). Position cover (45). Install bolts (46). Tighten bolts (46) to a torque of 50 N·m (37 lb ft).

Illustration 7

g06160431

7. Install plug (44A). Tighten plug (44A) to a torque of 60 N·m (44 lb ft).

Illustration 8

g06160420

8. Raise the temperature of bearing (43) and install bearing (43) on shaft assembly (43A).

Illustration 9

g01662923

9. As you install shaft assembly (43), install gear (42), spacer (41), gear (40) onto shaft assembly (43).

Illustration 10

g06160489

10. Raise the temperature of bearing (44) and install bearing (44). Install race (33). Apply Tooling (E) to bolt (31). Install washer (32) and bolt (31) . Tighten bolt (31) to a torque of 139 N·m (103 lb ft).

Illustration 11

g01662917

11. Apply Tooling (J) to cover (28). Apply Tooling (M) to bolts (27). Position cover (28) and install bolts (27). Tighten bolts (27) to a torque of 50 N·m (37 lb ft). Install yoke (29). Install the O-ring seals that are on the centering ring. Install the centering ring and ring nut (30). Tighten ring nut (30) to a torque of 190 N·m (140 lb ft).

Illustration 12

g06160765

Illustration 13

g02364559

Illustration 14

g02364636

Cutaway view showing Distance (G).

12. Install race (37A). Install bolt (37) and washer (38). Tighten bolt (37) to a torque of 139 N·m (103 lb ft). 13. Remove bolt (37) and washer (38). 14. This step determines the correct shaft preload adjustment for shaft assembly (43). Use Tooling (H) to measure Distance (G). Distance (G) is the measurement from the face of the inner bearing race (44) to the face of shaft assembly (43). The correct shim thickness is determined by subtracting 0.1 mm (0.004 inch) from Distance (G). 15. Apply Tooling (E) to bolt (37). Position shims (39) (not shown), washer (38), and install bolt (37). Tighten bolt (37) to a torque of 139 N·m (103 lb ft).

Illustration 15

g02366796

16. Install shims (36) as required to achieve an end play of 0.0508 mm (0.002 inch) on the shaft assembly. 17. Apply Tooling (J) to cover (35). Apply Tooling (M) to bolts (34). Install bolts (34). Tighten bolts (34) to a torque of 23 N·m (16 lb ft).

Illustration 16

18. Install bearing (26).

g01662916

Illustration 17

g01662915

19. Install bearing (25). Install retaining rings (20). Install gear (21). Install washer (22). Install bearing race (23). Install needle bearing (24).

Illustration 18

20. Install gear (18) and spacer (19). Install shaft assembly (17).

g01662914

Illustration 19

Illustration 20

g02367338

g02367137

Illustration 21

g01662873

21. Install washer (15) and bolt (16). Tighten bolt (16) to a torque of 139 N·m (103 lb ft). Remove washer (15) and bolt (16). 22. This step determines the correct preload adjustment for shaft assembly (17). Use Tooling (H) to measure Distance (X). Distance (X) is the measurement from the face of the inner bearing race to the face of shaft assembly (17). The correct shim thickness is determined by subtracting 0.1 mm (0.004 inch) from Distance (X). 23. Install shims (14) and washer (15). Apply Tooling (E) to bolt (16). Install bolt (16). Tighten bolt (16) to a torque of 139 N·m (103 lb ft).

Illustration 22

g01662913

24. Apply Tooling (J) to cover (13). Apply Tooling (M) to bolts (12). Position cover (13). Install bolts (12). Tighten bolt (12) to a torque of 23 N·m (17 lb ft).

Illustration 23

g01620653

Note: Install shift cylinder (8) with the three detent grooves facing upward. 25. Position fork (11). Apply Tooling (J) to shift cylinder (8). Install shift cylinder (8). Apply Tooling (E) to bolt (10). Install bolt (10). Tighten bolt (10) to a torque of 32 N·m (24 lb ft). Install Tooling (E) to bolt (9). Install the bushing and bolt (9). Tighten bolt (9) to a torque of 5.0 N·m (44.25 lb in).

Illustration 24

g01662853

26. Apply Tooling (J) to flange (7). Apply Tooling (M) to bolts (6). Position flange (7). Install bolts (6). Tighten bolt (37) to a torque of 50 N·m (37 lb ft).

Illustration 25

g06158367

27. Apply Tooling (J) to cover (5). Install cover (5). Install bolts (4). Apply Tooling (M) to switch assembly (3). Install switch assembly (3).

Illustration 26

g01620410

28. Install Tooling (A) to hydrostatic transfer drive (1).

Illustration 27

g01620418

Mon Jun 7 12:27:45 UTC+0530 2021

Disassembly and Assembly 906, 907 and 908 Compact Wheel Loaders Power Train Media Number -KENR5211-04

Publication Date -01/06/2012

Date Updated -26/04/2017

i06893674

Transfer Drive Group (Hydrostatic) (High Speed) Disassemble SMCS - 3159-015-H7; 4350-015-HZ

Disassembly Procedure Table 1 Required Tools Tool

Part Number

Part Description

Qty

439-3940

Bracket As

8B-7554

Puller Gp

6V-1819

Bolt

8T-0292

Bolt

1P-0469

Drive Plate

1P-0471

Drive Plate

Start By: a. Remove the Drive Shaft. Refer to Disassembly and Assembly Manual, "Drive Shaft - Remove and Install". b. Remove the Piston Motor. Refer to Disassembly and Assembly Manual, "Piston Motor (Hydrostatic) - Remove".

NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates.

Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.

1. Drain the transfer drive oil into a suitable container. The capacity of the transfer drive is 1.3 L (0.3 US gal).

Illustration 1

g01620410

2. Install Tooling (A) to transfer drive group (1).

Illustration 2

g01620418

3. Remove bolts (2) to remove transfer drive group (1).

Illustration 3

g06158367

4. Remove switch assembly (3). Remove bolts (4). Use bolts (4) in pusher holes to remove cover (5).

Illustration 4

g01662853

5. Remove bolts (6). Remove flange (7).

Illustration 5

g06158377

6. Remove bolt (9) and the bushing. Remove bolt (10). Remove shift cylinder (8). Remove fork (11).

Illustration 6

g01662913

7. Remove bolts (12). Remove cover (13).

Illustration 7

8. Remove bolt (16). Remove washer (15). Remove shims (14).

g01662873

Illustration 8

g01621043

9. Install Tooling (C) and Tooling (B).

Illustration 9

10. Remove shaft assembly (17). Remove gear (18) and spacer (19).

g01662914

This is the sample of the manual click on the download link for complete manual

DOWNLOAD LINK For some reason if link does not work download this pdf and then click

CAT Caterpillar 906K Service Repair Manual PDF Download