Issuu

414E BACKHOE LOADER ELB00001-UP

Note: Use Bookmarks panel to navigate Printed by Heavy Equipment Manuals v2.20

Printed in U.S.A

Heavy Equipment Manuals

































 



 







 











































































































































































 



 















  Product: BACKHOE LOADER Model: 414E BACKHOE LOADER ELB Configuration: 414E Backhoe Loader ELB00001-UP (MACHINE) POWERED BY 3054 Engine

Disassembly and Assembly 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Media Number -RENR6475-13

Publication Date -01/07/2017

Date Updated -13/07/2017

i02989945

System Pressure - Release SMCS - 4250-553-PX; 4300-553-PX; 5050-553-PX

Release Procedure 1. Park on a level surface. If you must park on a grade, chock the machine. 2. Apply the service brake in order to stop the machine. Move the transmission control lever to the NEUTRAL position. 3. Move the speed control lever to the LOW IDLE position. 4. Engage the parking brake. 5. Engage the transmission neutral lock. 6. Lower all attachments to the ground. 7. Stop the engine. 8. Turn the engine start switch key to OFF position for 4 seconds. 9. Turn the engine start switch key back to ON position. 10. Press the hydraulic shutoff switch to the ON position. 11. Operate all hydraulic controls through all positions in order to relieve hydraulic pressure. Repeat this step until all hydraulic pressure is released. 12. Move the hydraulic control levers to the HOLD position. 13. Turn the engine start switch to OFF position and remove the key. Copyright 1993 - 2025 Caterpillar Inc. All Rights Reserved.

Sat Feb 8 01:23:40 UTC+0700 2025

This is the sample of the manual click on the download link for complete manual

Download Now For some reason if link does not work download this pdf and then click

Private Network For SIS Licensees.

Disassembly and Assembly 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Media Number -RENR6475-13

Publication Date -01/07/2017

Date Updated -13/07/2017

i06892787

Tire and Rim (Front) - Remove and Install SMCS - 4202-010-FR

Removal Procedure Table 1 Required Tools Tool

Part Number

Part Description

Qty

1U-9745

Air/Hydraulic Jack Gp

180-3033

Repair Stand Set

Illustration 1

g01237930

1. Raise the bucket. Install cylinder lock (1).

Illustration 2

g01116896

2. Remove nuts (3) and fender (2). Place suitable cribbing (4) between the front axle and the frame on each side of the machine. This will keep the front axle from oscillating.

Illustration 3

g01116902

3. Loosen lug nuts (5). Do not remove lug nuts (5) now. Repeat for the other side.

Illustration 4

g01116891

4. Use Tooling (A) to raise the machine. Position Tooling (B) under the frame of the machine. Use Tooling (A) to lower the machine onto Tooling (B).

Illustration 5

g01237945

5. Attach a suitable lifting device to the tire and rim (6). The combined weight of the tire and rim (6) is approximately 70 kg (155 lb). Remove lug nuts (5) and remove the tire and rim (6).

Installation Procedure Table 2 Required Tools Tool

Part Number

Part Description

Qty

1U-9745

Air/Hydraulic Jack Gp

180-3033

Repair Stand Set

Illustration 6

1. Use Tooling (A) to raise the machine.

g01116891

Illustration 7

g01237945

2. Attach a suitable lifting device to the tire and rim (6). The combined weight of the tire and rim (6) is approximately 70 kg (155 lb). Apply a drop of oil on lug nuts (5). Install the rear tire and rim (6) and install lug nuts (6). Do not tighten lug nuts (6) now.

Illustration 8

g01116896

3. Install fender (2) and nuts (3). Remove suitable cribbing (4).

Illustration 9

g01116902

4. Remove Tooling (B) from the frame of the machine. Use Tooling (A) to lower the machine onto the ground. Tighten lug nuts (5) to a torque of 190 ± 40 N·m (140 ± 30 lb ft). Then, turn lug nuts (5) by an extra 60° ± 5°.

Illustration 10

g01237930

Sat Feb 8 01:24:29 UTC+0700 2025

Disassembly and Assembly 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Media Number -RENR6475-13

Publication Date -01/07/2017

Date Updated -13/07/2017

i02307210

Tie Rod (Steering)(Front) - Remove and Install - Two-Wheel Drive SMCS - 4318-010-ZH; 4318-010 S/N - BXE1-UP S/N - CBD1-UP S/N - DDT1-UP S/N - DPH1-UP S/N - EAT1-UP S/N - ELB1-UP S/N - FSH1-UP S/N - GKZ1-UP S/N - HBE1-UP S/N - KMW1-UP S/N - LBE1-UP S/N - MFG1-UP S/N - PHC1-UP S/N - SHA1-UP S/N - TMS1-UP

Removal Procedure Table 1 Required Tools Tool

Part Number

Part Description

Qty

1P-2321

Combination Puller

Illustration 1

g01155584

Illustration 2

g01155586

1. Loosen nut (1). Loosen nut (2). 2. Use Tooling (A) in order to disconnect tie rod (3) from the steering knuckle. Remove nut (1). Remove tie rod (3).

Installation Procedure

Illustration 3

g01155609

1. Install tie rod (3). 2. Tighten nut (2). Install nut (1). Tighten nut (1) to a torque of 250 N·m (184 lb ft). Tighten nut (2) to a torque of 220 N·m (162 lb ft). Copyright 1993 - 2025 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.

Sat Feb 8 01:24:48 UTC+0700 2025

Disassembly and Assembly 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Media Number -RENR6475-13

Publication Date -01/07/2017

Date Updated -13/07/2017

i05415863

Tie Rod (Steering)(Front) - Remove and Install SMCS - 4318-010-ZH; 4318-010

Removal Procedure Table 1 Required Tools Tool

Part Number

Part Description

Qty

1P-2320

Combination Puller

Start By: a. Remove the front tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) -Remove and Install".

Illustration 1

g01117258

Illustration 2

g01117260

1. Loosen nut (1) from tie rod (2). 2. Use Tooling (A) in order to disconnect tie rod (2). Remove nut (1) and remove tie rod (2).

Installation Procedure

Illustration 3

g01117258

1. Install tie rod (2). 2. Install nut (1). Tighten nut (1) to a torque of 220 N·m (162 lb ft). 3. Tighten the end of tie rod (2) that fastens into the steering cylinder to a torque of 300 + 15 - 45 N·m (220 + 11 -33 lb ft) End By: a. Install the front tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) Remove and Install". Copyright 1993 - 2025 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.

Sat Feb 8 01:25:09 UTC+0700 2025

Disassembly and Assembly 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Media Number -RENR6475-13

Publication Date -01/07/2017

Date Updated -13/07/2017

i03664881

Steering Cylinder (Front) - Remove and Install SMCS - 4303-010-FR

Removal Procedure Table 1 Required Tools Tool

Part Number

Part Description

Qty

1P-2320

Combination Puller

155-0695

Thread Lock Compound

Start By: A. Remove the front axle. Refer to Disassembly and Assembly, "Drive and Steering Axle (Front) - Remove".

Illustration 1

g01117223

Illustration 2

g01117229

1. Place front axle assembly (2) onto suitable cribbing. Loosen nut (1) from each side. 2. Use Tooling (A) in order to disconnect tie rod (3) . Remove nut (1) and remove tie rod (3) . Repeat for the other side.

Illustration 3

3. Remove bolts (4) and remove steering cylinder (5) .

Installation Procedure

g01117236

Illustration 4

g01117236

1. Install steering cylinder (5) . Apply Tooling (B) to bolts (4) and install bolts (4) . Tighten bolts (4) to a torque of 460 N·m (340 lb ft).

Illustration 5

2. Install tie rod (3) . Repeat for the other side.

g01117229

Illustration 6

g01117223

3. Install nut (1) to each side of front axle assembly (2) . Tighten nut (1) to a torque of 220 N·m (162 lb ft). End By: Install the front axle. Refer to Disassembly and Assembly, "Drive and Steering Axle (Front) - Install". Copyright 1993 - 2025 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.

Sat Feb 8 01:25:25 UTC+0700 2025

Disassembly and Assembly 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Media Number -RENR6475-13

Publication Date -01/07/2017

Date Updated -13/07/2017

i03664901

Steering Cylinder (Front) - Remove and Install - Two-Wheel Drive SMCS - 4303-010-FR

Removal Procedure Table 1 Required Tools Tool

Part Number

155-0695

Part Description

Qty

Thread Lock Compound

Start By: A. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release". B. Remove the tie rods. Refer to Disassembly and Assembly, "Tie Rod (Steering) (Front) Remove". Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.

Illustration 1

g01238002

1. Disconnect hose assemblies (1) and (2) . Remove bolts (4) and steering cylinder (3) .

Installation Procedure

Illustration 2

g01238002

1. Install steering cylinder (3) and bolts (4) . Apply Tooling (A) to bolts (4) and install bolts (4) . Tighten bolts (4) to a torque of 460 N·m (340 lb ft). Connect hose assemblies (1) and (2) . End By: Install the tie rods. Refer to Disassembly and Assembly, "Tie Rod (Steering) (Front) Install". Copyright 1993 - 2025 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.

Sat Feb 8 01:25:39 UTC+0700 2025

Disassembly and Assembly 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Media Number -RENR6475-13

Publication Date -01/07/2017

Date Updated -13/07/2017

i02106590

Final Drive Planetary - Remove SMCS - 4050-011; 4084-011

Removal Procedure Start By: a. Remove the wheel and tire. Refer to Disassembly and Assembly, "Wheel and Tire - Remove and Install".

NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates.

1. Drain the oil from the final drive planetary into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Final Drive Planetary (Axle) Oil - Change".

Illustration 1

g01072848

Sat Feb 8 01:25:52 UTC+0700 2025

This is the sample of the manual click on the download link for complete manual

Download Now For some reason if link does not work download this pdf and then click

CAT Caterpillar 414E Service Repair Manual PDF Download