Note: Use Bookmarks panel to navigate
Product: EXCAVATOR
Model: 345B L EXCAVATOR 5WS
Configuration: 345B 345BL TRACK-TYPE EXCAVATORS 5WS00001-UP (MACHINE) POWERED BY 3176C ENGINE
Disassembly and Assembly
345B, 345B Series II and W345B Series II Excavators Engine Supplement
Air Cleaner - Remove and Install
SMCS
Removal Procedure
Installation Procedure
Copyright 1993 - 2022 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees. Thu Mar 17 23:04:40 UTC+0530 2022
Product: EXCAVATOR
Model: 345B L EXCAVATOR 5WS
Configuration: 345B 345BL TRACK-TYPE EXCAVATORS 5WS00001-UP (MACHINE) POWERED BY 3176C ENGINE
Disassembly and Assembly
345B, 345B Series II and W345B Series II Excavators Engine Supplement
Alternator - Remove and Install
SMCS
Removal Procedure
i01240039
Installation Procedure
Product: EXCAVATOR
Model: 345B L EXCAVATOR 5WS
Configuration: 345B 345BL TRACK-TYPE EXCAVATORS 5WS00001-UP (MACHINE) POWERED BY 3176C ENGINE
Disassembly and Assembly
345B, 345B Series II and W345B Series II Excavators Engine Supplement
Electric Starting Motor - Remove and Install
SMCS
Removal Procedure
Note:
Installation Procedure
Product: EXCAVATOR
Model: 345B L EXCAVATOR 5WS
Configuration: 345B 345BL TRACK-TYPE EXCAVATORS 5WS00001-UP (MACHINE) POWERED BY 3176C ENGINE
Disassembly and Assembly
345B, 345B Series II and W345B Series II Excavators Engine Supplement
Engine and Main Hydraulic Pump - Install
SMCS
Installation Procedure
Note:
End By:
Product: EXCAVATOR
Model: 345B L EXCAVATOR 5WS
Configuration: 345B 345BL TRACK-TYPE EXCAVATORS 5WS00001-UP (MACHINE) POWERED BY 3176C ENGINE
Disassembly and Assembly
345B, 345B Series II and W345B Series II Excavators Engine Supplement
Engine and Main Hydraulic Pump - Remove
SMCS
Removal Procedure
Start By:
NOTICE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.
Steam can cause personal injury.
Check the coolant level only after the engine has been stopped and the filler cap is cool enough to touch with the bare hand.
Remove the filler cap slowly to relieve pressure.
Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
