311F LRR EXCAVATOR KCW00001-UP
Note: Use Bookmarks panel to navigate Printed by Heavy Equipment Manuals v2.20
Printed in U.S.A
Heavy Equipment Manuals
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05555875
Air Cleaner - Remove and Install SMCS - 1051-010; 1054-010
Removal Procedure
Illustration 1
g03520196
1. Open access door (1) on the left side of the machine.
Illustration 2
g03520338
2. Remove clamp (2). Disconnect harness assembly (3).
Illustration 3
g03520265
3. Remove bolts (4) .
Illustration 4
4. Remove air cleaner assembly (5) .
g03520979
This is the sample of the manual click on the download link for complete manual
DOWNLOAD LINK For some reason if link does not work download this pdf and then click
Installation Procedure 1. Install air cleaner assembly (5) in the reverse order of removal. Copyright 1993 - 2024 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Thu Aug 29 00:05:39 UTC+0530 2024
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05710888
Alternator - Remove and Install SMCS - 1405-010
Removal Procedure 1. Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch". 2. Open hood.
Illustration 1
3. Remove platform (1).
g03628757
Illustration 2
g03628826
4. Remove cable straps (2). Remove fire wall (3).
Illustration 3
g03628842
5. Loosen adjuster bolt (4) in order to remove belt (5). 6. Remove the belt from the alternator. Refer to Operation and Maintenance Manual, "Belts Inspect/Adjust/Replace".
Illustration 4
g03628856
7. Disconnect wire assemblies (6). Disconnect cable assembly (7). Remove bottom bolt (9) and alternator (8).
Installation Procedure 1. Install alternator (8) in the reverse order of removal. Copyright 1993 - 2024 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Thu Aug 29 00:01:11 UTC+0530 2024
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05537306
Battery - Remove and Install SMCS - 1401-010
Removal Procedure
Illustration 1
g03507102
Illustration 2
g03519481
1. Open access door (1) on the left side of the machine. 2. Turn the battery disconnect switch (2) to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".
Illustration 3
g03507124
3. Remove cover (3) .
Illustration 4
g03507131
4. Remove nut (4), the washer, and cover (5) .
Illustration 5
g03519516
5. Disconnect ground cable assembly (7). Remove cable assemblies (6). Disconnect positive cable assembly (8). Remove batteries (9).
Installation Procedure 1. Install batteries (9) in the reverse order of removal. 2. Turn the battery disconnect switch to the ON position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch" Copyright 1993 - 2024 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Thu Aug 29 00:00:44 UTC+0530 2024
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05726401
Belt Tightener - Remove and Install SMCS - 1358-010
Removal Procedure 1. Open hood to the engine compartment.
Illustration 1
g03641819
Illustration 2
g03641820
2. Remove platforms (1) and (2). Cut cable straps (3). Remove fire wall (4).
Illustration 3
g03641840
3. Release tension on adjuster bolt (5). Remove belt (6). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace".
Illustration 4
g03641906
4. Remove bolts (7) and (8). Remove belt tightener (9).
Installation Procedure 1. Install belt tightener (9) in the reverse order of removal. Copyright 1993 - 2024 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Thu Aug 29 00:08:49 UTC+0530 2024
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05719195
Clean Emissions Module - Remove and Install SMCS - 1050-010; 7279-010
Removal Procedure
Illustration 1
1. Open hood and remove platform (1).
g03635470
Illustration 2
g03635598
2. Remove brace (2) .
Illustration 3
g03635637
3. Disconnect harness assemblies (3). Remove the bolts and clamps (4).
Illustration 4
g03635684
4. Remove V- band clamp (5) and clean emissions module (6).
Installation Procedure 1. Install clean emissions module (6) in reverse order of removal. a. Install new V- band clamp (5). Loosely align with the exhaust manifold. b. Install clamps (4) and the bolts. Tighten the bolts evenly in three stages. c. Tighten the bolts to an initial torque of 8 N·m (71 lb in). d. Tighten the bolts to a second torque of 16 N·m (142 lb in). e. Tighten the bolts to a final torque of 25 N·m (221 lb in). f. Tighten V- band clamp to a torque of 12 N·m (106 lb in). Copyright 1993 - 2024 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Thu Aug 29 00:03:23 UTC+0530 2024
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05730235
Cooling System Package (Radiator, Hydraulic Oil Cooler) Remove and Install SMCS - 1353-010; 1353; 1374-010
Removal Procedure Table 1 Required Tools Tool
Part Number
Part Description
Qty
A
189-0408
Shackle As
1
B
439-3940
Bracket As
1
Start By: A. Remove the hood. B. Remove the counterweight. C. Remove the fan.
NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Drain the fluid from the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper draining procedure. 2. Drain the coolant. Refer to Operation and Maintenance Manual, "Coolant System Coolant (ELC) - Change" for the proper draining procedure
Illustration 1
g01447357
3. Remove bolts (2). Repeat for the other side of refrigerant condenser (1). Place refrigerant condenser (1) to one side.
Illustration 2
g01447385
4. Cut cable strap (3). Remove bolts (5) and bracket (4). Repeat for the other side.
Illustration 3
g03642677
5. Disconnect hose (6) and (8). Remove tank assembly (7).
Illustration 4
g03642699
Illustration 5
g03642689
6. Remove clamps (9). Disconnect tube assembly (10).
Illustration 6
g03642721
7. Remove the clamps and harness assembly (11). Remove bolts (12) and the brackets.
Illustration 7
g03642777
8. Remove bottom guard (13).
Illustration 8
9. Disconnect hose (14).
g03642779
Illustration 9
g03642787
Illustration 10
g03642791
Typical example of.
10. Remove bolts (15) and (16). 11. Attach Tooling (A), Tooling (B), and a suitable lifting device to radiator and hydraulic oil cooler (17). The weight of radiator and hydraulic oil cooler (17) is approximately 91 kg (200 lb).
Installation Procedure 1. Install radiator and hydraulic oil cooler (17) in the reverse order of removal. Copyright 1993 - 2024 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Thu Aug 29 00:09:06 UTC+0530 2024
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05732193
Crankshaft Pulley - Remove and Install SMCS - 1205-010
Removal Procedure Start By: A. Remove fan belt.
Illustration 1
1. Remove guard (1).
g03643381
Illustration 2
g03643391
2. Remove bolts (2).
Illustration 3
g03643387
3. Remove crankshaft pulley (3).
Installation Procedure 1. Install crankshaft pulley (3) in the reverse order of removal. a. Tighten bolts (2) to a torque of 45 N·m (33 lb ft). Copyright 1993 - 2024 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Thu Aug 29 00:09:53 UTC+0530 2024
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05711889
Electric Starting Motor - Remove and Install SMCS - 1453-010
Removal Procedure 1. Turn the battery disconnect switch to the OFF position. 2. Open hood.
Illustration 1
3. Remove platform (1).
g03629576
Illustration 2
g03629577
4. Remove cable straps (2). Remove fire wall (3).
Illustration 3
g03629598
5. Disconnect cable assemblies (4). Disconnect wire harness (6). Remove bolts (5) and electric starter motor (7).
Installation Procedure 1. Install electric starter motor (7) in the reverse order of removal. Copyright 1993 - 2024 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Thu Aug 29 00:02:35 UTC+0530 2024
Product: EXCAVATOR Model: 311F LRR EXCAVATOR KCW Configuration: 311F LRR Excavator KCW00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly 311F LRR Excavator C3.4B Engine Supplement Media Number -KENR9855-00
Publication Date -01/03/2014
Date Updated -05/03/2014
i05733393
Engine - Remove and Install SMCS - 1000-010
Removal Procedure Table 1 Required Tools Tool
Part Number
Part Description
Qty
A
1U-9754
Hydraulic Jack
1
B
138-7573
Link Bracket
2
Start By: A. Release the hydraulic system pressure. B. Remove hood. C. Remove counterweight.
Personal injury can result from contact with refrigerant. Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury. Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant. Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.
This is the sample of the manual click on the download link for complete manual
DOWNLOAD LINK For some reason if link does not work download this pdf and then click