Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06038381
Air Cleaner - Remove and Install SMCS - 1051-010
Removal Procedure
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
1. Refer to Operation and Maintenance Manual, "Radiator Tilting".
Illustration 1
g03784700
Illustration 2
g03784719
2. Disconnect harness assembly (1) and (3). Disconnect hose (2). Remove fuse assembly (4) and set aside.
Illustration 3
g03784764
3. Disconnect hose (5) .
Illustration 4
g03784767
This is the sample of the manual Click on the download link for complete manual
Download Link
4. Remove bolts (7). Remove air cleaner assembly (6) .
Installation Procedure 1. Install air cleaner housing (6) in the reverse order of removal. a. Tighten bolts (7) to a torque of 25 ± 3 N·m (221 ± 27 lb in). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Fri Feb 14 10:17:32 UTC+0530 2020
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06048971
Alternator - Remove and Install SMCS - 1405-010
Removal Procedure 1. If equipped, turn the battery disconnect switch to the OFF position. If not equipped with battery disconnect switch, refer to Operation and Maintenance Manual, "Battery or Battery Cable Inspect/Replace".
Illustration 1
2. Remove cover (1) .
g03789638
Illustration 2
g03783305
3. Disconnect harness assembly (2) .
Illustration 3
g03783308
4. Remove belt (4). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace" to remove and install belt. 5. Loosen bolt (3). Remove bolt (6) and alternator (5) .
Installation Procedure 1. Install alternator (6) in the reverse order of removal. a. Tighten cable assembly (2) to a torque of 8 ± 2 N·m (71 ± 18 lb in). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Fri Feb 14 10:13:11 UTC+0530 2020
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06027029
Battery and Battery Cable - Separate and Connect SMCS - 1401-029-KA
Removal Procedure
Illustration 1
g03783194
1. Remove battery disconnect switch (1) if equipped.
Illustration 2
g03783229
Illustration 3
g03783235
2. Disconnect cable assemblies (2) and (3). Remove bracket (4). Remove battery (5). The weight of battery (5) is approximately 23 kg (50 lb).
Installation Procedure 1. Install battery (5) in the reverse order of removal. a. Tighten cable assemblies (2) and (3) to a torque of 7 ± 2 N·m (64 ± 14 lb in). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Fri Feb 14 10:12:43 UTC+0530 2020
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06040017
Cab - Tilt SMCS - 7301-084
Raising the Cab
Do not go beneath cab unless cab is empty and support lever is engaged. Failure to follow the instructions or heed the warnings could result in injury or death.
Do not tilt the cab using an open door. The door must be closed and latched when lifting the cab. The door may become dislodged from its hinges and may cause serious personal injury or death.
1. Park the machine on level ground. 2. If you tilt the cab upward with the loader lift arms in the RAISED position, engage the brace for the loader lift arms. Refer to Operation and Maintenance Manual, "Loader Lift Arm Brace Operation" for the process for engaging the brace for the loader lift arms. 3. Close the cab door and ensure that the door is latched.
Illustration 1
g03785489
4. Remove bolt (1). Remove washer (2), rubber mount (3), rubber mount (4), washer (5), plate (6), and nut (7) . Note: Note the location of the rubber mounts and the spacers for assembly purposes. 5. Raise cab (8) .
Illustration 2
g03785578
6. Raise the cab until the cab support lever (9) is in the ENGAGED position.
Lowering the Cab
Illustration 3
g03785578
1. Raise the cab. With the help of another person, release the cab support lever (9) .
Illustration 4
g03785489
2. Lower cab (8) . 3. Install nut (7), plate (6), washer (5), rubber mount (4), rubber mount (3), washer (2) and bolt (1). Tighten bolt (1) to a torque of 125 ± 10 N·m (92 ± 7 lb ft). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Fri Feb 14 10:19:32 UTC+0530 2020
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06049715
Coolant Tank - Remove and Install SMCS - 1354-010; 1377-010-TP; 1377-010; 1377
Removal Procedure
Illustration 1
g03790211
1. Disconnect hose assembly (3). Remove bolts (1) to remove coolant tank (2) .
Installation Procedure 1. Install coolant tank (2) in the reverse order of removal. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Fri Feb 14 10:15:42 UTC+0530 2020
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06180651
Crankcase Breather - Remove and Install SMCS - 1317-011; 1317-012; 1317-010
Removal Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
Illustration 1
1. Remove hose (1) .
g03839347
Illustration 2
g03839359
2. Remove hose (4). Remove bolts (2) and crankcase breather (3) .
Installation Procedure 1. Install crankcase breather (3) in the reverse order of removal. Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Fri Feb 14 10:14:46 UTC+0530 2020
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06042724
Crankshaft Pulley - Remove and Install SMCS - 1205-010
Removal Procedure Table 1 Required Tools Tool
Part Number
Description
Qty
8S-2264
Puller
1
-
Bolt
3
A
Illustration 1
1. Remove cover (1) .
g03783300
Illustration 2
g03786576
2. Remove the belts (2). Refer to Operation and Maintenance Manual, "Belts Inspect/Adjust/Replace" to remove and install belt.
Illustration 3
g03786504
Illustration 4
g03786507
3. Loosen nut (5) . Note: Do not remove the nut at this time. 4. Install Tooling (A) to crankshaft pulley (4). Use Tooling (A) in order to remove crankshaft pulley (4) from crankshaft (6) . 5. Remove Tooling (A) . 6. Remove nut (5) . 7. Remove pulley (4) from crankshaft (6) . 8. Remove woodruff key (3) from crankshaft (6) .
Installation Procedure 1. Install crankshaft pulley (4) in the reverse order of removal. a. Lubricate nut (5) with clean engine oil and install the nut. Tighten nut (5) to a torque of 304 N·m (224 lb ft). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved.
Fri Feb 14 10:16:11 UTC+0530 2020
Private Network For SIS Licensees.
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06051200
Diesel Oxidation Catalyst - Remove and Install SMCS - 1075-010; 1091-010
Removal Procedure Start By: A. Tilt cab.
Illustration 1
g03791186
1. Remove bolts (1). Remove nuts (2). Remove brackets (4). Remove DOC canister (3) .
Installation Procedure 1. Install DOC canister (3) in the reverse order of removal. Fri Feb 14 10:18:03 UTC+0530 2020
Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06049099
Electric Starting Motor - Remove and Install SMCS - 1453-010
Removal Procedure
Accidental engine starting can cause injury or death to personnel working on the equipment. To avoid accidental engine starting, disconnect the battery cable from the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system. Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
1. If equipped, turn the battery disconnect switch to the OFF position. If not equipped with battery disconnect switch, refer to Operation and Maintenance Manual, "Battery or Battery Cable Inspect/Replace".
Illustration 1
g03789829
2. Remove cable strap (4) . 3. Remove harness assemblies (2) . 4. Remove bolts (3) and electric starting motor (1) .
Installation Procedure 1. Install electric starting motor (1) in the reverse order of removal. a. Tighten the nut (Terminal B) for cable assembly (2) to a torque of 13 ± 2 N·m (115 ± 18 lb in). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Fri Feb 14 10:13:25 UTC+0530 2020
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06051498
Electronic Control Module (ECM) - Remove and Install SMCS - 1901-010; 7600; 7610-010-MCH
Removal Procedure 1. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Inspect/Replace" 2. Refer to Operation and Maintenance Manual, "Radiator Tilting".
Illustration 1
3. Remove bolts (1) and cover (2) .
g03791319
Illustration 2
g03791328
Illustration 3
g03828839
Note: Use locking tabs (6) to remove and install harness assemblies (5). Pull out locking tabs (6) to remove harness assemblies (5). Push in locking tabs (6) to install harness assemblies (5) . 4. Disconnect harness assembly (5). Remove bolts (3) and electronic control module (4) .
Installation Procedure 1. Install electronic control module (4) in the reverse order of removal. a. Tighten bolts (1) and (3) to a torque of 7.5 ± 0.5 N·m (66 ± 4 lb in). Copyright 1993 - 2020 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Fri Feb 14 10:19:48 UTC+0530 2020
Product: COMPACT TRACK LOADER Model: 239D COMPACT TRACK LOADER BL9 Configuration: 239D Compact Track Loader BL900001-UP (MACHINE) POWERED BY C2.2 Engi ne
Disassembly and Assembly 239D and 249D Compact Track Loaders and 226D and 232D Skid Steer Loaders Engine Supplement Media Number -UENR4243-00
Publication Date -01/05/2015
Date Updated -26/05/2015
i06059945
Engine - Install SMCS - 1000-012
Installation Procedure Table 1 Required Tools Tool
Part Number
Part Description
Qty
A
368-0005
Lift Assembly
1
B
387-9124
Wrench Adapter
1
Illustration 1
g03794384
1. Using a suitable lifting device and Tooling (A) install engine (25). The weight of engine (25) is approximate 278 kg (612 lb).
Illustration 2
g03828840
Illustration 3
g03794328
2. Install mounts (24), washer (23), and nut (22).
Illustration 4
g03794319
3. Install harness assembly (18). Connect harness assemblies (19) and (17) .
4. Use Tooling (B) to install bolts (16). Install bolts (16). Connect pump stack (15). Tighten bolts (16) to a torque of 160 ± 30 N·m (118 ± 22 lb ft).
Illustration 5
g03794302
Illustration 6
g03794299
5. Install p-clip (14) . 6. Connect harness assemblies (11) and (12). Install cable strap (13) .
This is the sample of the manual Click on the download link for complete manual
Download Link