Note: Use Bookmarks panel to navigate
Product: SKID STEER LOADER
Model: 226 SKID STEER LOADER 5FZ
Configuration: 216 226 232 242 Skid Steer Loader 5FZ06700-UP (MACHINE) POWERED BY 3024C, 3034 Engine
Disassembly and Assembly
216, 226 and 228 Skid Steer Loaders Engine Supplement
Media Number -RENR2853-02
Engine - Install
Installation Procedure
Date Updated -16/11/2001
B
NOTICE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note:
Product: SKID STEER LOADER
Model: 226 SKID STEER LOADER 5FZ
Configuration: 216 226 232 242 Skid Steer Loader 5FZ06700-UP (MACHINE) POWERED BY 3024C, 3034 Engine
Disassembly and Assembly
216, 226 and 228 Skid Steer Loaders Engine Supplement
Media Number -RENR2853-02
Publication Date -01/08/2001
Pump Mounting - Remove and Install
Removal Procedure
Start By:
Date Updated -16/11/2001
i02169184
Installation Procedure
End By:
Product: SKID STEER LOADER
Model: 226 SKID STEER LOADER 5FZ
Configuration: 216 226 232 242 Skid Steer Loader 5FZ06700-UP (MACHINE) POWERED BY 3024C, 3034 Engine
Disassembly and Assembly
216, 226 and 228 Skid Steer Loaders Engine Supplement
Media
Engine - Remove
Removal Procedure
B
Start By:
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.
Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Personal injury or death can result without releasing all of the hydraulic pressure.
Release all the pressure from the hydraulic system before any lines are disconnected.
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury,
Note:
turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
