Service Repair Manual 140M 2 MOTOR GRADER
Printed by : quality-service-repair-manual.com
Product: MOTOR GRADER Model: 140M 2 MOTOR GRADER R9M Configuration: 140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement Media Number -KENR8898-05
Publication Date -01/10/2018
Date Updated -30/10/2018
i04121609
Engine - Remove and Install SMCS -
Removal Procedure Required Tools Tool
Part Number
Part Description
Qty
Start By:
NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
At operating temperature, the engine coolant is hot and under pressure. Steam can cause personal injury. Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand. Remove the fill cap slowly to relieve pressure. Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
NOTICE
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
Note:
This is the sample of the manual Click on the download link for complete Manual
Download Link
Installation Procedure Copyright 1993 - 2022 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Wed Oct 5 22:31:45 UTC+0530 2022
Product: MOTOR GRADER Model: 140M 2 MOTOR GRADER R9M Configuration: 140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement Media Number -KENR8898-05
Publication Date -01/10/2018
Date Updated -30/10/2018
i04177652
Clean Emissions Module - Remove and Install SMCS -
Removal Procedure Start By:
Installation Procedure Copyright 1993 - 2022 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Wed Oct 5 22:30:35 UTC+0530 2022
Product: MOTOR GRADER Model: 140M 2 MOTOR GRADER R9M Configuration: 140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement Media Number -KENR8898-05
Publication Date -01/10/2018
Date Updated -30/10/2018
i05534526
Rear Gear Group - Remove and Install SMCS -
Removal Procedure Required Tools Tool
Part Number
Part Description
Qty
Start By:
NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
Installation Procedure NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
End By: Copyright 1993 - 2022 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Wed Oct 5 22:30:16 UTC+0530 2022
Product: MOTOR GRADER Model: 140M 2 MOTOR GRADER R9M Configuration: 140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement Media Number -KENR8898-05
Publication Date -01/10/2018
Date Updated -30/10/2018
i07568984
Flywheel and Rear Gear Group - Remove and Install - Drive Gear SMCS -
Removal Procedure Required Tools Tool
Part Number
Part Description
Qty
Start By:
NOTICE Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
This is the sample of the manual Click on the download link for complete Manual
Download Link
NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates.