Electronic Products and Technology May 2016

Publications Mail Agreement No. 40065710

electronic products and technology - MAY 2016 electronic products and technology

ELECTRONIC ENCLOSURES & THERMAL MANAGEMENT AN EP&T SPECIAL REPORT PAGE 6

TEST & MEASUREMENT Page 11

ACCULOGIC

IoT (INTERNET of THINGS) Page 18 GREENPEAK TECHNOLOGIES

EMBEDDED SYSTEMS & ENGINEERING SOFTWARE Page 20 MENTOR GRAPHICS

OFC_May16.indd 1

16-04-25 2:21 PM

00

http://ept.hotims.com/61397-1

160325_BOPS_EPT_CA.indd 1 EPT_DigiKey_May.indd 21 ROB_p2-5_May16.indd

3/25/16 10:10 AM 2016-04-14 16-04-25 2:37 2:01 PM PM

e d i t o r i a l electronic products andtechnology technology electronic products and Volume 38 Number 3

May 2016

Stephen Law Editor 416.510.5208 slaw@ept.ca

Sohail Kamal

West Coast Correspondent sohail@nextgear.ca

Joanna Malivoire

Peter Loney

Account Manager Direct: 866.868.7089 jmalivoire@ept.ca

Publisher 416.510.5207 pdloney@ept.ca

003

PE symposium creates networking, education opportunities Representing the single largest event of its kind in Canada, the Canadian Printed Electronics Industry Association (CPEIA) successfully held its second annual symposium this April, playing host to approximately 150 members of the international and local electronics industry. Serving as an optimum networking and educational event, CPES2016 attendees were exposed to intelligence relating to the mixing research and development, industry expertise, commercial effort and government support. Representatives engaged with printable, flexible, stretchable and wearable electronics converged for the two-day event at Sheridan College in Oakville, ON. Most of these organizations are already working at bringing to market new products and applications across industry verticals - such as intelligent packaging, smart buildings, automotive, aerospace, healthcare and smart fabrics. Keen ears sat in to listen to 30 in-depth presentations by field experts and leading Canadian researchers. Ten academic posters submitted by leading Canadian principal investigators and their teams, were also highlighted. This year’s symposium added a tradeshow area, featuring 12 tabletop exhibits representing product and service providers to the emerging fields. Among them were Ceradrop (MCI Group), providers of a modular-based materials deposition platform dedicated to hybrid process development. Also exhibiting its wares was Novacentrix, suppliers of photonic curing tools, materials

and expertise that enables the development and manufacturing of this next generation of printed electronics. CPEIA handed out its inaugural industry awards, with the Product Innovation prize being delivered to Myant & Co., for its breakthrough of integrating technology into textiles. The Toronto-based firm recently released Vagalume – a collection of stylish athletic apparel that enhances visibility for safety at night, using electroluminescent technology. The winner for CPES2016 Commercialization Award was Memtronik Innovations, for rapidly responding to a market need for an innovative new solution in the retail industry. In the space of a month, Montreal-based Memtronik implemented a novel concept in capacitive touch and illuminated displays for a top provider to the consumer market for global brand owners and retailers. “Printable electronics can add smart functions to ordinary objects – these are technologies and applications that will drive the Internet of Things and impact a wide range of end-user verticals, including those we explored during CPES,” says Peter Kallai, president and CEO of the CPEIA and Chair of the CPES organizing committee. Stephen Law, Editor slaw@ept.ca @EPTmagazine

Presents Hammond Manufacturing

Tracy Lelyk

Art Director Operations Coordinator 416.510.5120 tlelyk@ept.ca

Anita Madden

Bona Lao

Circulation Manager 416.442.5600 ext 3596 amadden@annexnewcom.ca

Subscription Inquiries 416.442.5600 ext 3552 blao@annexnewcom.ca

Tracey Hanson

Account Coordinator 416.510.6762 thanson@annexnewcom.ca

Tim Dimopoulos

Executive Publisher

EP&T (Electronic Products & Technology) is published nine times per year: Monthly in February, May, August, September, October, Bi-Monthly January/February, March/April, June/July, November/December by:

Annex Business Media 80 Valleybrook Drive, Toronto ON M3B 2S9 info@ept.ca Website: www.ept.ca Tel: 416.442.5600 Fax: 416.510.5134 Sales: 416.510.5207 • Editorial 416.510.5208

ISSN 0708-4366 (Print) • ISSN 1923-3701 (Online) Subscription Rates: Canada: $56.00 per year, US: $98.00 per year, International: USD$134.00 per year, Single copy: $15 (Canada); $20 (all others)

THERE'S A HAMMOND MANUFACTURING ENCLOSURE FOR EVERY MARKET!

Editorial Purpose: Electronic Products & Technology provides timely, comprehensive coverage of the latest worldwide developments and trends in electronic products, equipment and systems, and interprets their significance to manufacturers and end-users in the Canadian marketplace. Publications Mail Agreement No. 40065710 Canada Post: Return undeliverable Canadian addresses to: EP&T Circulation Dept., 80 Valleybrook Drive, Toronto, ON M3B 2S9, Subscription Inquiries: 416.442.5600 x3548 • circulation@ept.ca EP&T (Electronic Products & Technology) assumes no responsibility for the validity of claims in items reported. © 2016 This publication or any part of it may not be reproduced, stored or transmitted in any form whatsoever without the express written consent of the publisher. From time to time we make our subscription list available to companies and organizations whose products and services we believe may be of interest to you. If you do not want your name to be made available, please contact EP&T with your subscription number. Printed in Canada We acknowledge the [financial] support of the Government of Canada.

Industrial Enclosures Small Enclosures Diecast Aluminum EMI/RFI Plastic & the list continues!

SCAN HERE

for EP&T’s Digital Edition

FR E E SH I PP I N G FO R ONL I NE O RDE RS OVE R $ 2 5 0 ! * * Please visit www.e-sonic.com/policy/#Shipping for full details and exclusions.

e-sonic.com | 1-800-56-SONIC http://ept.hotims.com/61397-2 EPT_ElectroSonic_May.indd 1

ROB_p2-5_May16.indd 3

2016-04-14 2:07 PM

16-04-25 2:37 PM

400

representatives and distributors

NEWSWATCH N E W S WATC H NE WSWATCH electronic products and technology • may 2016

Hammond builds-on enclosure strengths with addition of new facility 119,000-sq-ft building in Guelph features new paint line, equipment Driven by growing demand for its standard and customized enclosure products, Hammond Manufacturing Company Ltd., has constructed a brand-new 119,000-squarefoot facility in Guelph ON, bringing its local footprint to approximately 450,000 squarefeet and 600 employees. The building (on Wilbert Street) features a state-of-theart powder paint line, along with new advanced equipment, process improvements and facility modifications. With construction commencing in June of 2015, the firm took official possession early this April. “We reached a point where it became necessary to expand our painting line at the original building (situated nearby Laser cutting area with Steve Menegotto, on Edinburgh Rd North), so general manager – datacom/electronic metal, we took this quantum leap,” holding cut metal enclosure materials says Steve Menegotto, general at Hammond’s Wilbert St. facility. manager – datacom/electronic metal (Wilbert facility). The freshly installed flexible manufacturing system includes a newly acquired punching and laser cutting system that are expected to double capacity for data/comm products, while also improving customer service and quality of product, according to Menegotto. The facility sports some modern environmentally conscious elements, such as a closedloop water system, reducing waste water. Equipped with a five-stage wash system, the enviro-friendly paint line also runs with a paint reclaim system, reducing waste and speeding the process. “The new building will employ close to 100 people,” says Menegotto, who has been with the firm for 20-years. Priding itself on its enclosure modification services, approximately 50% of Hammond’s 19” cabinet business in Canada involves a modified product. This can include 19” cabinet assembly with specific specs for a window or door, shelves or vented door in rear.

TüV SüD acquires Global EMC in Canada TüV SüD strengthened its service offering in the context of electromagnetic compatibility (EMC) measurements by acquiring Global EMC Inc. in Canada. The acquisition will reinforce TüV SüD’s market presence in North America and enable the company to meet the increasing demand for EMC services in numerous industries more efficiently and effectively.

J-Squared invests in repair lab targeting MIL-Aero sector J-Squared Technologies Inc., Mississauga ON, a 25-year-old Canadian owned and operated company with a business unit in the United States to support the North American electronics marketplace, has invested heavily in expanding its MRO services – initially targeted towards the MILAero based customers. In addition to its distribution business, J-Squared has been J-Squared Technologies’ MRO support services focused on supporting and supplying lab in Mississauga is initially targeted electronic products and services into towards MIL-Aero based customers. the military, aerospace, industrial, energy, transportation, medical and communications market sectors. Full MRO support services are customized to every client’s needs, including assembly, integration, prototyping, repair, rework and test. This provides ‘cradle to grave’ services and support for its customer’s end products utilizing J-Squared’s Integration and MRO facilities.

Value-added proposition supports customers to the ‘next level’ “This value-added proposition really helps us provide that next level of support for our customers,” says J-Squared VP marketing Maria Turavani. The move is highlighted by a significant investment in a state of the art repair lab, furnished with best-in-class diagnostic and rework equipment. This includes a fully ESD compliant work environment. To ensure that J-Squared enhances its capabilities to service the MIL-Aero market, the company has added senior staff members with a deep understanding of its inner workings. J-Squared is in the process of implementing AS9100C and Transport Canada AMO Certifications, while also being ISO 9001/2008 and A member of J-Squared’s technical staff Controlled Goods certified. A cominspects a pcb board inside the firm’s new mitted member of the aeronautics MRO services lab. sector, J-Squared is an active member with the Ontario Aerospace Council (OAC), Women in Aerospace (WIA), and National Business Aviation Association (NBAA). “We’re not coming in new to these sectors. We are adding the necessary resources and experienced staff to augment our support,” adds J-Squared president, Jeff Gibson. The enviro-controlled facility is completely secure, ensuring IP protection to each and every customer, says Gibson. The firm also employs a specific anti-counterfeit policy, which assures that only valid components are used. “It is very important that we can provide additional capabilities to enable our customers to receive complete solutions from J-Squared. Our goal is to support our customer’s products from inception to the end-of-life for each product,” Turavani says. With these additional capabilities new Mil-Aero customers are emerging from international markets, as well as increasing services to their existing customers within Canada. J-Squared provides complete product lifecycle management support for its customers. Typically customers require a standard warranty (typically one year), extended warranty dependent on customer requirements and support services for legacy sustainment.

Canadian printable, flexible electronics leaders recognized Myant & Co., Memtronik Innovations claim Canada’s first industry awards at CPES2016

http://ept.hotims.com/61397-3

The Canadian Printable Electronics Industry Association (CPEIA) delivered the inaugural Innovation and Commercialization Award winners during its annual symposium yesterday. The winner for the CPES2016 Product Innovation Award was Myant & Co., for its latest breakthrough of integrating technology into textiles. Just two weeks ago, Myant released Vagalume – a collection of stylish athletic apparel that enhances visibility for safety at night, using electroluminescent technology. Vagalume means ‘firefly’ in Portuguese. Conventional reflective technology relies on an external light source to be visible. Myant’s Vagalume emits its own light which is visible under any conditions and from any angle. Functional enough to light up when you want it to, Vagalume is as thin as paper, as flexible as fabric and machine washable. Active people have the ultimate combination of style and function to light up the night. The winner for CPES2016 Commercialization Award was Memtronik Innovations, for rapidly responding to a market need for an innovative new solution in the retail industry. In the space of a month, Memtronik implemented a novel concept in capacitive touch and illuminated displays for a

top provider to the consumer market for global brand owners and retailers. Memtronik used its unique expertise with human-machine interfaces, integrated electronics precision printing with DuPont materials, and surface mount assembly capabilities, to develop and ship its innovative prototypes within days.

“Our first award winners are representative of over 100 outstanding Canadian organizations” These integrated printed circuits combine multiple functions with capacitive sensors, conductive adhesive, and controlled LED lighting, for use in 3D demo displays. Memtronik is expecting, and will be able to fulfill, volume orders quickly and locally, creating an innovative new solution for a multi-million-dollar market. Canada’s Printable, Flexible and Wearable Electronics Symposium (CPES2016), held this week at Sheridan College in Oakville ON, showcased the convergence of research and development, industry expertise, commercial

effort and government activity that gives Canada a tremendous opportunity in the explosive global market for printable, flexible and wearable electronics (PE), according to Peter Kallai, president and CEO of the CPEIA and Chair of the CPES Organizing Committee. “This year’s Symposium was once again a smashing success,” Kallai says. Responding to the feedback received last year, CPES2016 broke new ground to focus on industrial applications in a host of market verticals, including health care, consumer products, intelligent buildings, connected homes, smart packaging, smart auto parts and aerospace. In fact, more than half of this year’s attendees were from industry. “Our first award winners are representative of over 100 outstanding Canadian organizations that are pioneering great innovations with printable, flexible and wearable electronics,” Kallai adds. “Printable electronics can add smart functions to ordinary objects – these are technologies and applications that will drive the Internet of Things and impact a wide range of end user verticals, including those we explored during CPES. I applaud Myant and Memtronik for their efforts to commercialize new products that will help put Canada on the map in this exciting emerging market.”

full online product listings at.ept.hotims.com ROB_p2-5_May16.indd 4

16-04-29 10:12 AM

SEPT15 Sensors NC Ad (EP&T) CANADIAN_EP&T 8/11/15 2:07 PM Page 1

Reliable Detection For Your Application

You can’t afford not to know. See it all at thinkallied.com/sensors

1.800.433.5700 © Allied Electronics, Inc 2015. ‘Allied Electronics’ and the Allied Electronics logo are trademarks of Allied Electronics, Inc.

An Electrocomponents Company.

http://ept.hotims.com/61397-4

ROB_p2-5_May16.indd 5

16-04-25 2:37 PM

6

electronic products and technology • may 2016

Electronic Enclosures & Thermal Management

How different enclosure air flow patterns affect

the choice of air-to-air heat exchangers By W. John Bilski, senior engineer; Gary Mumma, product line manager, heat exchangers; Gregg Baldassarre, vice-president, sales and marketing, Thermacore Inc.

Designers of enclosures for electronics continue to explore ways of increasing the density of boards and devices inside electronic enclosures while minimizing internal temperatures. Today’s enclosures, cabinet sizes and designs vary substantially in width and height up to seven feet tall. But they have one thing in common: The density of the electronics inside is increasing — and so is the heat load. Properly cooling the internal electronics requires thoughtful selection of heat exchangers in relation to air flow patterns inside the cabinet. Using natural convection in the enclosure works only if the cabinet contains just a few heat-generating components. If the cabinet doors are opened to improve air circulation — or if high-powered fans are used to move air through the cabinet — then contamination from dust, vermin and debris is likely to occur. To reduce internal temperature, using air-to-liquid heat exchangers or cold plates are not a viable alternative, because they may introduce unwelcome condensate in close proximity to the electronic components. Fortunately, alternatives exist that are ideally suited for modern enclosure designs. To optimize air flow and heat transfer inside electronics enclosures, two air flow paths are commonly used — a vertical flow pattern and a horizontal flow pattern (see illustrations). Either a heat-pipe core or an impingement core may be selected depending on the air flow pattern. Both technologies will maintain a NEMA 4/IP 66 (water tight) or NEMA 12/IP55 (dust tight) seal of the enclosure.

In an ‘HX-style’ heat exchanger, separate internal and external energy-efficient fans draw air through the interior and exterior portions of the heat exchanger, which are separated by a flange and closedcell neoprene gasket.

The condensed working fluid is pumped back to the evaporator side by gravity (or by capillary action if working against gravity). Heat pipes are a totally passive heat transfer system. There is no pump to wear out or that requires an additional energy source. In application, the heat pipes are arrayed as a parallel-plate, top- or side-mounted ‘HX-style’ heat exchanger. Separate internal and external energyefficient fans draw air through the interior and exterior portions of the heat exchanger, which are separated by a flange and closed-cell neoprene gasket. This arrangement prevents the introduction of potentially contaminated exterior air into the sealed NEMA (National Electrical Manufacturers Association) enclosure. Versatile mounting options allow for heat exchanger placement on doors, side,

top or back of the enclosure. The light weight and compact size of a heat-pipe heat exchanger make it ideal for spaceconstrained applications. The drawback is that, due to the heat-pipe heat exchanger’s compact and highly efficient design, it may be subject to fouling in dirty or oily industrial environments.

Impingement heat exchangers for horizontal air flow

In enclosures employing horizontal air circulation, double-sided impingement technology is used in front- or side-mounted ‘HXi-style’ low-profile heat exchangers. The double-sided impingement system utilizes a core that separates the interIn enclosures nal and external sides of the enclosure. employing horizontal Internal fans draw in the hotter, inside air air circulation, and blow it toward the fin core (see horidouble-sided zontal illustration). By impinging against impingement the fins, heat is transferred technology is used from the air to the fin core. in front- or sideLikewise, a set of outside mounted ‘HXi-style’ low-profile heat fans draws in the cooler, exchangers. ambient air and blows it toward the outer side of the fin core, removing the waste exchanger can be made using two-phase heat. heat-pipe technology. Heat pipes use The fin core is made of a unique capillary action that provides thin aluminum, a material extremely effective thermal conductivity. that reduces the thermal The shape of a heat pipe can be cylinresistance (due to conducdrical or planar. Inside the heat pipe, the tion) to negligible levels. surface is lined with a capillary wicking A double-sided impingement material. The heat pipe is evacuated and heat exchanger can dissiback-filled with a small quantity of a pate twice the heat load working fluid, such as water, acetone or compared to conventional methanol. The fluid absorbs heat in the counter-flow heat convecevaporator region by vaporization. Then tion in which air flows paralthe vapor carries the heat to the conIn enclosures employing horizontal air circulation, lel to the fins. Thanks to its Two-phase heat-pipe heat exchangers denser region where the vapor condenses, double-sided impingement technology utilizes a core design and efficiency characfor vertical air flow releasing heat to the cooling media — in that separates the internal and external sides of the teristics, an ‘HXi-style’ heat enclosure. Internal fans draw in the hotter, inside air and For tall cabinets that employ a verthis case, the ambient air surrounding the exchanger is comparatively blow it toward the fin core. tical air flow pattern, a suitable heat heat pipes projecting from the enclosure. 50 percent smaller. The size reduction allows more packaging flexibility for enclosure manufacturers. Double-sided impingement heat exchangers also maintain the NEMA 4 and NEMA 12 integrity of the enclosures and also may meet UL and Telcordia GR-487CORE standards. As a closed-loop system, a doublesided impingement system employs fewer J-Squared Has the Brands You Need! moving parts to reduce the chance of mechanical problems. Stock units are available as 2, 4, 6, or 8 fans with a low noise level of 64.5dBA for the two-fan version. Custom designs are available to handle high wattage heat dissipation requirements. Typical installations are performed using low-profile design and Hammond Manufacturing: Fujipoly: Orion Fans: modular dual-fan configuration. • Electrical enclosures, • High performance thermal Depending on the cabinet size, double• AC fans, DC fans, fan trays, sided impingement heat exchangers can small enclosures, interface materials fan accessories & blowers be deployed singly or in combination racks & rack cabinets to provide installation flexibility in any orientation. Integrated custom features such as alarms and temperature controls are also available as an option. Additional advantages of a double-sided impingement system include a shorter air flow path through the electronics. The shorter path means less resistance to air flow and the possibility of eliminating the fan tray(s). Furthermore, due to the wide air gap between the impingement plates in the core, air can flow freely, 1-855-365-2188 • Email us at inforequest@jsquared.com

Enclosures & Thermal Management

Electronic

JSQUARED.COM

with any questions or inquiries

continued on page 8

http://ept.hotims.com/61397-5

full online product listings at ept.hotims.com ENC_pg6-9_May16.indd 1

16-04-25 2:38 PM

electronic enclosures & thermal management

electronic products and technology • may 2016

Enclosure maker offers in-house modification solutions

Thin cooling fan delivers 0.60cfm

Firm provides extensive in-house modification capabilities that enable its standard product families to be customized to meet the requirements of specific applications. Recent examples are taller 90-inch versions of the two door, floor standing 1422 and HN4FM series and the single door freestanding 1418 and HN4FS series, all available in either painted mild steel or 304 or 316L stainless steel construction. The custom 90 inch high painted steel models are agency approved to UL/CSA Type 4 and the stainless steel versions to UL/CSA Type 4X. HAMMOND MANUFACTURING

Micro-Fan measures 17x17x4mm (at 15,000rpm) and provides static pressure of 2.413mm H2O. Product’s life expectancy is 50,000 hours, with operating voltages from 2.8 to 3.5Vdc. Device is suitable for space-limited applications, including UAVs (Unmanned-AerialVehicles), pocket projectors, PDA, MID, smartphones, GPS, masks and goggles, micro fuel cells, and air-sensing usages. JARO THERMAL

http://ept.hotims.com/61397-35

http://ept.hotims.com/61397-39

Black NEMA enclosures are UL-listed NBB series of black UL-listed weatherproof industrial NEMA enclosures are constructed from molded halogen-free and self-extinguishing fiberglass reinforced polyester (FRP), suitable for use in extreme temperature or corrosive environments. NBB121 series (12x10x5 inch), NBB100 series (10x8x5 inch), NBB141 series (14x12x7 inch) and NBB181 series (10x8x5 inch) are available with aluminum mounting plates, non-metallic mounting plates or without mounting plates. L-COM GLOBAL

High-performance cooling material dissipates large amounts of heat curamik CoolPerformance Plus high-performance cooling material is an advanced liquid-cooled material that dissipates large amounts of heat and provide reliable thermal management of high-power laser diodes and other heat-generating optical devices. Products provide several layers of pure copper, formed into hermetic, three-dimensional microchannel or macrochannel water-cooled structures capable dissipating large amounts of heat in small areas. The mounting surfaces of the coolers can be diamond-milled to meet the fine tolerances required for mounting of laser diode packages, for optimum flow of heat away from the diodes. ROGERS PES

http://ept.hotims.com/61397-40

NEW

P R O TO C A S E

http://ept.hotims.com/61397-36

7

Custom Cut

GASKETS

Built in 2-3 Days Professional Grade No Minimum Orders

CUSTOM BUILT GASKETS FOR ELECTRONIC ENCLOSURES AND OTHER APPLICATIONS Protocase's custom cut gaskets are perfect for enclosures requiring added protection from the elements. Whether placed indoors or outside, our gaskets provide your enclosure with an air tight seal and water resistence, in addition to dust and oil protection, for robust protection of your electrical components. We know the dif�iculty to precision cut gaskets by hand, so we've made the process easier to acquire by precision cutting your gasket through our CNC machining capabilites, in the same 2-3 day turnaround and with no minimum orders.

Thermally conductive solution transfers heat through encapsulating layer Technomelt thermally conductive material transfers heat through the encapsulating layer and delivers dual-function performance in a single material solution. Product serves as a streamlined alternative to multi-step, messy potting processes. Materials can be melted, molded and cooled quickly under low pressure, delivering an encapsulation technique that provides a high throughput solution for protection of delicate circuitry and pcb assemblies, while forming a selfenclosed housing. HENKEL ADHESIVE ELECTRONICS

Material Categories

Including: Polyurethane/Neoprene/Vinyl/Buna-N Foam • Neoprene Rubber • Rubberized Cork • Fibre Gasket • Styrene Butadiene Rubber Non-stocked material also available

http://ept.hotims.com/61397-37

Professional grade gaskets, made to your speci�ications, priced right & shipped in 2-3 days.

PROTOCASE DESIGNER ®

P

P

Double rail extrusions suit rugged subracks

Free Downloadable 3D Enclosure Design Software

Double rail extrusions with dual mounting provide the modular framework for electronics enclosures. Products provide mounting holes for a second screw, delivering more stability and strength for a modular enclosure. The rails have been tested and used in German railway applications for high resistance to shock/vibration and the ability to handle extreme loads. The extruded aluminum rails come in front and rear versions and with various interfaces. There are sets of 1HP pitch patterns of 2.5M tapped holes for snapping in card guides and mounting backplanes. PIXUS TECHNOLOGIES

Want to design a traditional sheet metal enclosure? Protocase Designer is the fastest and easiest way to design, price and build custom electronic enclosures.

• Free Downloadable 3D Enclosure Design Software • Instant Price Quotes • Buy Your Custom Enclosure Online, Ready In 2-3 Days www.protocasedesigner.com/ept Protocase allows you to buy custom electronic enclosures with a whole new level of speed and convenience Our friendly and knowledgable sales representatives will be happy to assist you in placing your order

www.protocase.com info@protocase.com 1.866.849.3911

http://ept.hotims.com/61397-38

http://ept.hotims.com/61397-6

w w w. e p t . c a ENC_pg6-9_May16.indd 2

EPT_Protocase_May.indd 1

2016-04-14 3:20 PM

16-04-25 2:38 PM

electronic enclosures & thermal management

8

electronic products and technology • may 2016

Monitoring kit measures airflow of ac, dc fans

Thermoelectric module simulation software shortens design cycles

Airflow monitoring system is simple to implement and use. The field retrofittable AFM Kit includes an AFM-01NC airflow module, mounting clip, three plastic guards (80mm, 92mm, and 120mm), buzzer, LED and holder, switch and wall mounted power supply. Kit comes completely assembled in a 10’ wire assembly, making installation even easier. Product operates an optical LED and/or audible alarm, which can be controlled with included switch, when airflow falls below 8.2ft/s due to fan filter clogs, foreign objects coming in contact with the fan blade, or fan failure. ORION FANS

AZTEC thermoelectric module (TEM) simulation software program algorithms to further reduce thermal design time. Product selection tool permits design engineers to specify a given set of input variables based on application attributes and the software analysis outputs optimal TEMs for examination. Program enables design engineers to quickly choose a suitable TEM based on a cross comparison of TEM datasheets. Further reducing a customer’s time-to-market, software contains an analysis worksheet that simulates how TEM devices will function under a specific set of operating conditions. LAIRD TECHNOLOGY

http://ept.hotims.com/61397-41

Enclosure family caters to evolving MDU marketplace Five new models join the MDU Enclosure Family for use in the ever evolving MDU marketplace. Products are suitable for subscriber densities of 12 to 192. A variety of options are available for indoor and outdoor installation. Firm’s Network Link Panels are available in rackmount or wallmount versions. Available stubbed or unstubbed and in a variety of connector styles and densities. PRIORITY ELECTRONICS

http://ept.hotims.com/61397-44

Redundant, dual redundant rack systems serve wayside & sub-station installations Redundant and Dual Redundant Rack Systems are suitable for mission critical applications where high-reliability is essential and loss of power difficult. Product’s output power package range from 250W to 5000W in one 19” chassis using firm’s C500 to C4500 Series units (higher power systems available upon request). Output voltages of 24, 48, 60, 100, 110, and 150Vdc (additional dc voltages are available) and input voltages 115/230Vac @ 50/60Hz single phase (3-phase ac and dc voltages available). SCHAEFER

http://ept.hotims.com/61397-42

Enclosures house Arduino, BeagleBone development boards HAMAR family of design-specific plastic enclosures house small form factor development boards, configured for the Arduino LEONARDO, M0 PRO, UNO or Y⁄N, and the HAMBB, optimized for the BeagleBone Green. All models are based on the popular general purpose 1593 Series and are supplied ready to use with machined or molded I/O, power and expansion ports to suit the layout of components on the various boards. All versions are available in translucent blue, grey or black general purpose ABS with a satin finish. HAMMOND MANUFACTURING

http://ept.hotims.com/61397-45

Cooling units conserve energy, boost cost efficiency

http://ept.hotims.com/61397-43

Blue e+ cooling units boosts energy conservation with its speed-regulated components and patented heat pipe technology. Delivering high energy efficiency, units provide extended component life, flexibility and ease of use. Product’s cooling process uses two parallel cooling circuits working together, depending on temperature difference. The integral heat pipe dissipates heat from the enclosure as soon as the ambient temperature falls below the set point, providing passive climatization. Active climatization is achieved via the compressor’s cooling circuit with speed-controlled components for demand-based cooling. Unit’s provide cooling capacities up to 6,000 watts (previously up to 4,000 watts) and can be used in environments ranging from -30°C to +60°C. RITTAL CANADA http://ept.hotims.com/61397-46

Enclosure coolers protect sensitive electronics

The only limit is the imagination ••

Modular enclosure solutions and components

• OpenVPX, MicroTCA, AdvancedTCA, and more

Enclosure coolers keep electrical and electronic enclosures cool, clean and dry, and are a low-cost alternative to expensive high-maintenance air conditioners. A small mounting footprint allows use in confined spaces, and require 1/10th the space of comparable air conditioner units. Various easy-toinstall models are available from 400 to 5,000 BTU with air consumption from 8 SCFM to 70 SCFM. NEMA 12, NEMA 4, NEMA 4X, Zone 2 & 22 and Class I, II, III, Div 2 ratings available. VORTEC http://ept.hotims.com/61397-47

Pixus offers virtually unlimited configurations for 19” rackmount, desktop, and rugged enclosures.

• Electronics Cases

From electronics instrumentation cases to embedded systems in the latest backplane architectures, Pixus has a solution for you.

continued from page 6

• Subrack and faceplate components • Rugged options for Mil/Aero, Railway

sales@pixustechnologies.com | pixustechnologies.com

ENC_pg6-9_May16.indd 3

reducing the risks of fouling in dirty or oily environments.

Ensuring the appropriate heat exchanger selection Making the proper heat exchanger selection will ensure that the electronics cabinet can control the heat generated from the components within the enclosure. Effective heat transfer lengthens equipment life and improves reliability. Two heat exchanger technologies have emerged that provide optimum performance for two common enclosure air flow patterns: two-phase heat-pipe heat exchangers for vertical air flow and impingement heat exchangers for horizontal air flow. With proper application of advanced heat-pipe or fin-core components within the given heat exchanger type, reliable and efficient thermal protection can be achieved in a wide range of cabinet sizes and profiles. For more information on heat exchangers from Thermacore Inc., go to http://ept.hotims.com/61397-48

http://ept.hotims.com/61397-7 EPT_Pixus_May.indd 1

The choice of air-to-air heat exchangers

full online product listings at ept.hotims.com

2016-04-14 2:55 PM

16-04-25 2:38 PM

electronic enclosures & thermal management

electronic products and technology • may 2016

Material streamlines substrate coating processes

Digital multimeter with thermal imager speeds troubleshooting

Technomelt AS 8998 materials are suitable for high-performance low pressure molding applications. The newly-formulated product provides a streamlined and economical alternative to conventional masking techniques for various coating requirements. Product provides simple and fast dispensability to mask ‘keep out zones’ for printed circuit assemblies that will undergo subsequent coating or chemical deposition processes. Product delivers a fast, highly-precise, automated, easy-to-remove approach to mask specific components or designated pcb areas that must remain free of any applied protective coatings. HENKEL ADHESIVE ELECTRONICS

279 FC TRMS Thermal Multimeter test tool integrates a full-featured true RMS (TRMS) digital multimeter (DMM) with a thermal camera in one device to speed troubleshooting. Unit allows technicians to quickly and safely check for hot spots in fuses, wires, insulators, connectors, splices; and switches with the imager and then troubleshoot and analyze issues with the DMM. Product provides 15 electrical measurement functions including ac/dc voltage, resistance, continuity, capacitance, diode test, min/max, and frequency. FLUKE

http://ept.hotims.com/61397-49

http://ept.hotims.com/61397-50

OpenVPX backplanes come in 3U and 6U configurations Firm provides several standard profile configurations for OpenVPX backplanes and the boards are compliant to the VITA 65 specification. Firm has new 3U backplanes in 5, 9 and 18 slots and new 6U versions in 2 and 5 slots. Backplanes come with or without rear I/O connectors and are designed to cable over to firm’s power boards for VITA 62 or PICMG 2.11 power supplies. Units have header options for VITA 46.11 for system management. PIXUS TECHNOLOGIES http://ept.hotims.com/61397-51

9

Dc fan and blower products offer wide range of package sizes, speeds, airflows DC fan and blower product listing expanded to provide a viable, long-term source for customers when their current source obsoletes a fan or blower product. Firm has introduced 52 new dc fans and 4 new dc blowers, which includes a wide range of package size, speed (RPM), airflow (CFM), and special function combinations. Firm has increased its 25mm (OD2510 Series), 30mm (OD3010 Series), 50mm (OD5010 Series and OD5015 Series), 80mm (OD8015 Series and OD8032 Series), 92mm (OD9238 Series), and 120mm (OD1232 Series) fan product offering. Firm has added two new fan sizes to its product offering with the introduction of 35mm (OD3510 Series) and 40mm (OD4015 Series) fans. ORION FANS http://ept.hotims.com/61397-52

Pre-configured industrial frame boosts cooling capacity Pre-Configured Industrial Distribution Frame (IDF) is specifically engineered to deploy and protect rack mount Ethernet switches in industrial applications. Product enables consistent equipment deployment with 25% faster installation times than a traditional IDF that is not pre-configured. Unit also reduces the risk of downtime due to switch overheating. Product extends the lifecycle of the equipment such as switches and UPS systems installed in the enclosure. Unit is UL 508A Listed and UL Type 4/12, IP66 Rated to ensure safety and reliability. The wall-mount, dual hinged device accommodates up to five switches with front and rear access for quick and easy maintenance. PANDUIT http://ept.hotims.com/61397-53

Modified Electronic

ENCLOSURES Hammond Manufacturing provides a full modification service for our extensive line of electronic enclosures. Our Waterloo, Ontario facility is equipped with 10 CNC machines to provide fast, accurate service. We offer:

• Machining to metal and plastic • Painting • Printing • Inserts and standoffs • Low minimum order

Make Hammond your first call for electronic enclosures!

Toll Free: 877-411-5911 ENCLOSURE QUESTIONS? Hammond enclosure experts will be at an EPTECH show near you!

www.hammondmfg.com • Email: modifieds@hammondmfg.com If the Hammond Manufacturing insert is missing from this issue, please go to http://ept.hotims.com/61397-8

w w w. e p t . c a ENC_pg6-9_May16.indd 4

16-04-25 2:38 PM

10

products on review

electronic products and technology • may 2016

100VA pure sine wave dc-ac inverters operate in harsh environments

Single pole spring type terminal blocks suit compact, low profile devices

CSI-100-D1-IP66 series of rugged, dc-ac inverters deliver up to 100VA pure sine wave output voltage. Microprocessor controlled high frequency PWM technology is used to convert 24Vdc, 36Vdc, 48Vdc or 125Vdc input to 115Vac at 60Hz or 400Hz, or 230Vac at 50Hz. Efficiency is typically 80% at full load. Filtering on the input and output contributes to low noise, which allows the unit to be used in EMI sensitive environments without additional filtering. The units have comprehensive electronic protection and comply with EN60950-1 and corresponding UL458 and CSA international safety standards. The rugged devices are installed in IP66-rated waterproof, die cast aluminum packages with sealed connectors. The internal module is conformal coated and ruggedized. ABSOPULSE ELECTRONICS

Metz Connect Series SM99 and SR99 single pole spring type terminal blocks provide a spring mechanism and aimed at compact and low profile devices. Available in SMT and THR designs, devices utilize a simple push-in technique for wire insertion and a large finger-operated pushbutton for wire release. Products provide a wire connection indicator and test point for added connection reliability. Device’s compact design allows for space optimization on printed circuit boards. Series SM99 and SR99 single pole spring type terminal blocks are rated up to 9A and accommodate a single wire cable range of 24-16 AWG. The terminal blocks are reflow-capable with a connection direction of 90°C. HEILIND ELECTRONICS

http://ept.hotims.com/61397-54

Wire cut and strip unit expands capabilities EcoStrip 9380 cut and strip machine provides a complete feature set at an economical price point. The flexible machine provides expanded capabilities and can be configured with rollers or belt feeding and the configuration can be quickly and easily changed by the operator. Product’s 3-position design of the optional belt feeding system further enhances the customer’s capabilities and can be set for normal mode, roller mode or short mode processing – depending upon the application. Unit is also compatible with a wide range of accessories, including prefeeding, marking, stacking and coiling, which turn the stand-alone machine into a fully automatic processing line. SCHLEUNIGER http://ept.hotims.com/61397-55

http://ept.hotims.com/61397-56

20mm coin cell battery retainers deliver ultra low profile SMT and THM series of ultra-low profile, 20mm coin cell battery retainers are suitable for high density pcb packaging. Engineered with high efficiency spring tension to assure low contact resistance, products firmly secure batteries within the retainers. Rugged, lightweight and bearing clearly-marked polarity, devices are manufactured of Phosphor Bronze, and accept 2016, 2020, 2025 and 2032 coin cells from all major manufacturers. Products are are nickel-plated for durability and high temperature soldering. KEYSTONE http://ept.hotims.com/61397-57

Heavy duty fuse clip withstands up to 1500Vac/Vdc CSO heavy duty fuse clip family comes with cost-effective tinplated version. Designed for 10.3mm diameter fuses, device is suitable for applications with voltages up to 1500Vac/Vdc and currents to 32A. Product is available in solder and screw/rivet versions. Solder version allows direct mounting on a printed circuit board by means of through-hole technology. Screw/ rivet version provides additional flexibility for basic designs. Due to the special copper alloy all versions are characterized by a strong clamping force resulting in minimal power loss. SCHURTER

G6DN SPST slim power relay provides low power consumption, long life and high switching capacity. High switching 5A relay provides small width of 5mm, low coil power consumption of 110mW, long electrical life of 80K ops and specially designed cross bar twin gold plated contacts ensuring high reliability. Product provides minimum permissible load characteristics of 1mA at 5Vdc (at 120 operations/minute) and higher ambient temperature -40 to +90Celsius. OMRON http://ept.hotims.com/61397-59

KWS-A board mount ac-dc power supplies are capable of starting up at 40C, as the convection cooled units will operate in ambient temperatures of up to 85°C and are rated for full load over a -10 to 45/55C range (model dependent). The encapsulated product series comprises of four power levels and four output voltages 5V, 12V, 15V and 24V. 5W and 10W models measure 38.1 x 25.4 x 21.5mm, 15W 50.8 x 25.4 x 24mm and the 25W models 63.5 x 25.4 x 29mm. Rated for Class II operation, units require no earth ground connection. TDK-LAMBDA AMERICAS http://ept.hotims.com/61397-61

west tech report

Coast Correspondent

Module 18plus power distribution system is a compact wiring solution for all dc 24V load cables and signal lines, no matter if it is for decentralized power distribution or for centralized plant concepts. Product comes with state-of-the-art push-in technology for DIN rail mounting and provides panel builders with modularity, flexibility and efficiency. Product consists of three basic 13mm wide components, including 18plus-EM supply module, 18plusAM connection module for accommodating single pole circuit breakers (ESS30, ESX10-, ESX10-S, 2210-S) and the 18plus-SM signaling module with a green LED for indicating the ‘OK’ condition of the aux. circuit. E-T-A CIRCUIT BREAKERS

SPST slim relay delivers 5A switching

Board mount ac-dc power supplies operate over wide temperature range

Reliability, passion, partnerships drive expansion for Shearwater By Sohail Kamal, West

Efficient power distribution system is modular, flexible

http://ept.hotims.com/61397-58

http://ept.hotims.com/61397-60

Bruce Partridge managed to combine his experience in computer systems design, embedded programming and advanced technical diving to form Shearwater Research Inc., a Vancouver-based manufacturer and developer of cutting-edge dive computers. The firm recently released its latest Shearwater Perdix dive computer in addition to moving into an expanded 17,000-square-foot-facility. I recently had the opportunity to connect with Shearwater president Steve Prescesky, to discuss his passion for the industry, along with his desire to build the most reliable products in its field. Prescesky underscores the importance of developing and nurturing partnerships with his customers, which has led to Shearwaters growth. Q: Great to see a West Coast company develop new products over the past decade. What was the impetus for the start of Shearwater? “Shearwater was founded by Bruce Partridge out of his love of scuba diving,”explains Prescesky. “Bruce was not satisfied with the ease of use and power of trimix technical dive computers available prior to creating the first Shearwater computer in 2005. Other divers soon discovered Shearwater resulting in steady strong growth.” This growth helped move Shearwater from a home based business, and in February, they expanded into a state of the art 17,000-square-foot facility in Richmond, BC. Q: What sets Shearwater’s products apart from other dive products? “Since the beginning, Shearwater has been focused on three attributes: Power, simplicity and reliability. The ‘powerful’ aspect lends itself the computers’ ability to handle all of the functions that technical divers require and do so with intelligent design.” Simple can be of incredible value to divers who have to deal with limited visibility and limited dexterity due to dive suits. By decreasing the number of button-pushes required to access a feature, and by creating an intuitive menu system, Shearwater can empower people to be better divers. When dealing with products that have the ability to save lives, Prescesky underscores the importance of reliability – which cannot be overstated: “(Product) reliability means

that our customers can really trust our quality and that our products will always work despite use in harsh environments.” Q: How does the Shearwater Perdix improve on the Shearwater Petrel and why should it matter to divers? “Shearwater is the leader in dive computers for technical and advanced divers. High production volumes and an engineering staff of eight people have allowed us to rool-out the Shearwater Perdix, which employs advanced manufacturing technologies and innovative engineered polymers to reduce the size by nearly 40%. This product retains a large and even easier to read screen,”adds Prescesky. “Better ergonomics, rugged durability and compelling pricing are expanding the market for Shearwater computers to a broader base of advanced scuba divers. We have also improved battery life by 30%, achieving 45-hours from an easily replaceable AA battery.”

Q: Can you share a challenge that Shearwater has had to overcome and how other tech companies can learn from your success? “It is a big challenge for a new start-up to provide a quality product. Shearwater was able to establish an early foundation by really understanding our customer’s requirements to build a viable product. Quality was built in through taking the time to refine and make good designs, along with an overriding desire to always build the most reliable product,”Prescesky explains. “Through a love of diving, we have built long lasting strategic partnerships. Some of our early dive buddies became our first customers and are now true development partners – assisting us with testing, safety certifications and actually selling the products.” For more information about Shearwater, technical diving computers or rebreather control systems, visit www.shearwater.com.

full online product listings at.ept.hotims.com ROB_pg10_May6.indd 1

16-04-25 3:33 PM

11

electronic products and technology • may 2016

Test & Measurement Averna acquires European T&M firm Acquisition of Test & Measurement Solutions makes Averna a truly global test-solution provider for clients in North America, Europe and Asia Averna, a Montreal-based developer of test solutions and services for communications and electronics devicemakers worldwide, has acquired 100% of Europe-based Test & Measurement Solutions for an undisclosed amount. Averna’s main shareholders, Tandem Expansion and Caisse de dépôt et placement du Québec (CDPQ), both participated in the financing of this acquisition. For CDPQ, this investment is consistent with its objective to further the international expansion of high-performing Quebec companies. T&M Solutions develops multidisciplinary solutions to test, measure, inspect, assemble and validate products in nearly all segments of the production industry. Headquartered in Belgium and with offices in the Netherlands and Poland, T&M Solutions is a National Instruments Gold Alliance Partner and has 100 employees, including 70 engineers with almost 50 NI certifications. This acquisition increases Averna’s global reach as well as provides a strong local presence in Europe, enabling Averna to enter this market with a well-established and respected solution provider while giving it a springboard for further European deployments. In addition, T&M Solutions brings unique

expertise in semiconductor testing, vision inspection systems and precision assembly to complement Averna’s existing solutions and industry strengths. “This major expansion into Europe signals Averna’s strategic positioning to accelerate growth and become a truly global Test Engineering powerhouse. Test & Measurement Solutions and Averna share complementary solution portfolios, clients and partners, so this is a real win-win arrangement for everyone,” says François Rainville, vice-president of sales & marketing for Averna. “We are proud to welcome T&M Solutions’ customers and employees while providing all our customers with additional expertise and increased worldwide presence.” André Gareau, Averna’s president and CEO, added “We’re building a strong track record of successful acquisitions and are motivated by our robust pipeline of opportunities in Europe and around the world.” These are exciting times for Averna and the industry as our leading test expertise, rapid processes and global support continue to demonstrate that we are a strategic-value partner for our clients’ ongoing product quality and market goals.”

techniCAL signs disty deal with Fluke techniCAL Systems 2002 Inc. has signed a distribution deal with Fluke Electronics Canada LP. Terms of the agreement include Fluke’s process calibration tools which include a full range of calibrators and troubleshooting tools for instrument technicians working in the process industries. The range of process calibrators include: documenting process calibrators, multifunction process calibrators, single function and multifunction temperature calibrators and a variety of mA loop calibrators. Also included are a full range of electrical and industrial test tools for every application. Additionally, Fluke provides a wide selection of probes, accessories, application and product expertise for issues you face every day. Finally, the agreement includes the Amprobe product line, which builds rugged, reliable test and measurement tools that have been trusted by professional electricians and HVAC technicians for over 65 years. The products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals.

12-Bit wideband digital receiver comes in PXIe format M9203A PXIe 12-bit high-speed digitizer/wideband digital receiver runs up to 3.2GS/s, with up to 2GHz instantaneous analog bandwidth. Unit is suitable for applications in wireless communication, emerging communication standards, radar and satellite communication and semiconductor automated test. Modular solutions allow microwave measurements and are highly adaptable, while integrating core signalanalysis capabilities with hardware speed and accuracy, allowing engineers to tailor the systems to fit their specific needs. KEYSIGHT TECHNOLOGIES http://ept.hotims.com/61397-62

REFURBISHED EQUIPMENT Refurbished pre-owned test equipment Fully-restored, tested and callibrated Industry-leading one-year warranty

TESTEQUITY ENVIRONMENTAL CHAMBERS Designed and manufactured in California Best performance and value 3-year parts and 1-year labor warranty

RENT/ LEASE EQUIPMENT

TestEquity is your value-added provider of premium electronic test and measurement solutions.

Solve your short-term equipment need Competitive rental rates Rent-to-buy option

We are the largest stocking distributor for new test and measurement equipment.

Flexible financing options

NOW SU

G MRO TOOLS & N I R E OFF

300 PARTNERS OM OVER R F S E PPLI

To learn how we can help your business grow Visit TestEquity.com/ept or Call 800.732.3457.

TestEquity Inc. Montreal, Quebec http://ept.hotims.com/61397-9 EPT_TestEquity_May.indd 1

w w w. e p t . c a TM_p11-15_May16.indd 1

2016-04-15 9:47 AM

16-04-27 11:20 AM

12

test & measurement

electronic products and technology • may 2016

Compact handheld meters supply test kits HHC200 Series of portable rugged environmental meters for temperature, pressure, RPM/light intensity, air flow, humidity, dew point and wet bulb measurement provide fast and accurate readings for environmental field monitoring needs. HHC201 and HHC210 digital thermometers come in two different models: infrared thermometer with laser sighting and dual thermocouple thermometer. HHC230 and HHC250 light meter and optical RPM meter measure light intensity and non-contact optical RPM with accuracy and reliability. HHC261 hygroanemometer for air flow and humidity measurement boosts accuracy with ambient measurement, wind chill indicator and integrated wet bulb flow vane. HHC280 and HHC281 manometers come in two different models: absolute pressure and precision differential. OMEGA http://ept.hotims.com/61397-63

Industrial handheld oscilloscope speeds electro-mechanical troubleshooting ScopeMeter 120B Series industrial handheld oscilloscope simplifies and speeds electro-mechanical troubleshooting. Device provides Connect-and-View technology that recognizes signal patterns and automatically sets up the scope’s triggering, amplitude and time base eliminating the typical trialand-error setup process. Once the waveform is captured, the IntellaSet intelligent measurement detection automatically selects key measurements based on the acquired waveform type and displays the most relevant measurement values (for example, Vrms and Hz for a line voltage signal, or Vpeak-peak and Hz for a square wave), helping technicians easily identify and characterize potential signal faults. FLUKE http://ept.hotims.com/61397-64

Protocol analysis system meets emerging Ethernet standards SierraNet T328 Protocol Analysis systems provides users the state of the art analysis platform for the emerging 25G, 50G and 100G Ethernet standard and for the new 32G/128G Fibre Channel interconnections. Utilizing firm’s T.A.P.3 probing technology, product provides users a completely transparent acquisition solution for all Ethernet and Fibre Channel SAN/NAS environments, ensuring the traffic captured is the traffic transiting the bus under observation. TELEDYNE LECROY http://ept.hotims.com/61397-65

USB-based real-time spectrum analyzers deliver up to 7.5GHz frequency RSA500 and RSA600 series USBbased real-time spectrum analyzers with 4 higher-performance models targets design, spectrum management and wireless transmitter installation and maintenance applications. Units provide frequency coverage from 9kHz up to 7.5GHz with 40MHz acquisition bandwidth, a measurement dynamic range from -161dBm/Hz displayed average noise level and up to +30dBm maximum input. Both models have an optional tracking generator with an integrated internal bridge for basic device, cable and antenna testing. Through a standard USB 3.0 connection, units are operated from a desktop PC, laptop or tablet using an updated version of the full-featured SignalVu-PC software suite. TEKTRONIX http://ept.hotims.com/61397-66

Temperature and humidity data logger is compact Senonics Bluefin 1.0TH compact temperature and humidity data logger provides Bluetooth to easily communicate with your logger at a distance in environments that you can’t access or do not want to disturb. Configure the included temperature and humidity sensor straight from your Apple iPhone, iPad or iPadMini. The APP is a free download with purchase from the Apple Store. Product operates in a temperature range of -20 to 60C and provides a temperature resolution of 0.04C. ITM INSTRUMENTS http://ept.hotims.com/61397-67

Electronic production test solution boosts throughput Flying Scorpion FLS980 Series III electronic production test solution comes with the Ultimate Accuracy Package Option along with high throughput features such as the latest version Flying Bed of Nails (FBON). Unit boosts accuracy and probing speeds and provides enhanced boundary scan, digital testing and device programming. Additional features include a heavy duty conveyor system to handle large and heavy boards, and high bandwidth HPM850 probe modules for functional testing (up-to 20GHz). ACCULOGIC

Programmable, digital attenuator operates at frequency up to 20GHz LDA-203 digital attenuator has an operating frequency of 1 to 20GHz and provides a 0 to 63dB attenuation range and a step size resolution of 0.5dB. Unit is powered and controlled by connection to a PC or self-powered USB hub and is programmable for fixed attenuation or swept attenuation ramps directly from the included graphical user interface (GUI) software. Easily programmable for ATE applications, device can also be used in WiMAX, 3G, 4G, LTE, DVB fading simulators and engineering and production test labs. VAUNIX http://ept.hotims.com/61397-69

http://ept.hotims.com/61397-68

http://ept.hotims.com/61397-10

full online product listings at ept.hotims.com TM_p11-15_May16.indd 2

16-04-27 11:49 AM

Become your company’s most valuable player. Elevate your status with Keysight’s InniiVision oscilloscopes. Get your projects on the fast track with features such as zone triggering, built-in analysis software and super-fast waveform update rates. Plus Keysight has a team of experts ready and available to help you overcome any test and measurement obstacles. You already have the talent, and with Keysight you have the tools you need to become your company’s MVP.

Keysight InniiVision oscilloscopes

2000 X-Series

3000T X-Series

4000 X-Series

6000 X-Series

Bandwidth

70 MHz –200 MHz

100 MHz–1 GHz

200 MHz–1.5 GHz

1 GHz– 6 GHz

Instrument integration

Arbitrary waveform generator, digital voltmeter, protocol analyzer, FFT, counter, MSO

Ready to achieve MVP status? Go to the Scopes Learning Center: www.keysight.com/find/ScopeMVP USA: 800 829 4444 CAN: 877 894 4414 © Keysight Technologies, Inc. 2016

EPT_Keysight_May.indd 31 TM_p11-15_May16.indd

http://ept.hotims.com/61397-11

2016-04-14 16-04-25 2:46 2:33 PM PM

14

test & measurement

electronic products and technology • may 2016

Addressing wireless system multi-antenna test challenge By Sheri DeTomasi, 5G solutions business lead, Keysight Technologies Inc.

More and more, people rely on their wireless devices to manage email, social media, banking, and downloading or streaming videos and movies. In order to support these activities, consumers are demanding higher data rates and better signal integrity from their mobile devices. LTE and LTE-Advanced are becoming more mainstream in many markets today and next generation standards in 5G are in the early research and definition phase. In cellular, LTE-Advanced is the next big technology growth area to keep up with consumer demand until we start to see roll outs of 5G. Today, many wireless providers are working to improve connectivity and peak data rates of their mobile communications systems through implementation of LTE-Advanced multi-antenna techniques. Multi-antenna techniques are also used in wireless LAN standards like 802.11n and 802.11ac. Multi-antenna techniques are a key technology used to add capacity to a system by increasing the number of antennas at the transmitter, receiver or both. Specifically, multi-antenna techniques are implemented to achieve better spectral efficiency and increased peak data rates. The techniques used today include: • Path diversity – uses multiple antennas at either the transmitter or the receiver to improve the robustness of the signal, or the ability of the receiver to correctly receive the transmitted data. Path diversity can be implemented as transmit diversity with multiple antennas at the transmitter, transmitting to a single receiver. Path diversity can also be implemented as receive diversity where a single transmitter transmits to multiple antennas on the receiver side. Both of these multiantenna configurations help to improve signal robustness when the channel suffers with poor signal to noise ratio. • Spatial multiplexing – is a technique used in MIMO (multiple input, multiple output), where two or more antennas are used on both the transmitter and the receiver. This multi-antenna technique is used to improve spatial efficiency. With MIMO, independent and separately encoded data signals (data streams) is transmitted from each of the multiple transmitter or receiver antennas. The data from individual antennas, at each end of the communications circuit, are combined to minimize errors and optimize data speed. MIMO is used in many of the higher data rate wireless technologies such as LTE, LTE-A, WiMAX and WLAN 802.11n/ac. The spatial multiplexing technique improves spatial efficiency and data throughput for a single user. Multi-user MIMO is a form of spatial multiplexing that can be used to send data to multiple users simultaneously in the same frequency spectrum. This technique increases system efficiency rather than increasing data throughput rate to a single user. • Beamsteering or beamforming (when channel feedback is used) uses multiple antennas for directional transmissions to steer a signal in the direction of a specific receiver. The same signal is transmitted from two or more spatially separated transmitters simultaneously. Magnitude

and phase adjustments are applied so that multiple transmissions can combine destructively or constructively. The constructive (or in phase, coherent) signals combine constructively and create a beam pattern. With the constructive combination, the combined signal provides much more energy at the receiving antenna, resulting in better signal robustness and improved signal to noise ratio at the receiver. Benefits of beamsteaming/ beamforming include selectivity, interference management with increased gain and better SNR. These multi-antenna techniques are used in today’s wireless communications. Multi-antenna techniques with multi-user beamforming is expected to be a critical technology for 5G, utilizing hundreds of antennas at the basestation, communicating with multiple devices at one time. This is also known as Massive MIMO. Design and development of communication systems using multi-antenna techniques presents a number of challenges. As the number of antennas increase, engineers are faced with system verification tests that are much more complicated than previous configurations.

Figure 2: Using a shared LO to achieve phase coherency with multi-channel analyzers

channels in a measurement system. all the clk signals. In the case shown in Without calibration, there is some Figure 1, the master reference signal uses degrading of measurement results. Using one PXI trigger line to send an initialcalibration to correct for the offsets will ization trigger to all the slave modules. ensure that any measured differences are Once all channels are armed, then, the due to the device under test and not the master unit signals a trigger event and all test equipment. Corrections are achieved modules will start on the next 10 MHz clk by measuring the channel-to-channel difedge. This method ensures that all start ferences and applying adjustments. This actions are aligned so that data capture can be done by generating a known referor playback is started simultaneously on Multi-channel synchronized all channels. test systems are helpful, providing A common clock reference provides time scalability and the ability to use alignment but not phase shared resources for triggering coherence. This can be a problem in beamforming and synchronization applications since magnitude and phase shifts are used to create the beam There are new challenges for validating pattern. Phase coherency multi-antenna configurations including between channels is typithe need to analyze the multiple transmit cally needed to simulate or receive chains simultaneously; and for the real world transmission MIMO configurations the need for a multior measurement. Two sigchannel synchronized test. nals are said to be phase In addition, in beamforming applicacoherent if they have a tions, it’s critical to have precise timing constant, relative phase and synchronization between channels; at all instances in time. and phase coherency to ensure proper If each signal generation inter-channel phase and magnitude meaor measurement channel surements. To address these test chalhas its own independentlenges, multi-channel synchronized test ly generated signal, then systems are helpful, providing scalability each channel would have and the ability to use shared resources for its own phase properties. triggering and synchronization. This makes it difficult to PXI test solutions are ideal because achieve a constant relative they can provide channel count scalabilFigure 3: Measuring beam patterns with out and phase between the mulwith time and phase corrections ity as well as time and phase synchronitiple channels. zation to support MIMO and beamforming A phase stable relationtests. ence signal on each source channel, one ship between generated signals or meaSynchronization between signals, or at a time, to each analyzer channel and surement channels can be achieved using channels can be quite difficult to achieve measuring the result. Figure 3 shows how modular instruments that provide phase when considering all the synchronization the calibration can impact the accuracy coherency between the channels. One that needs to take place in the mulof the beam pattern. method to achieve true phase coherency tiple instrument environment. Typically, To summarize, multi-antenna techis to use a shared local oscillator (LO) a master reference signal is used to align niques are becoming increasingly comwith each channel to ensure that all mon in today’s wireless communications channels have the same phase systems, and will be used even more in 5G properties. By sharing an LO, communication systems. Engineers will be each downconverter in the anachallenged to develop test and verificalyzer or each modulator in the tion system for complex multi-channel source share the same phase systems. Modular instrument platforms characteristics including phase help to address these challenges with error and the RF paths can be scalable channel count, channel-tofully characterized given the channel synchronization, and with phase constant phase and channel to coherency and other features providing channel skew (delay in paths the right tools for today’s and tomorrow’s for each instrument). See figure measurement system. 2. With this approach, the multiple signals can construct and destruct properly. For more information on addressing multi-channel synchronization for It is important to accomFigure 1: Using a master clk to synchronize data MIMO and beamforming test, go to modate for the magnitude and capture or playback http://ept.hotims.com/61397-70 phase differences between

full online product listings at ept.hotims.com TM_p11-15_May16.indd 4

16-04-25 2:46 PM

test & measurement

electronic products and technology • may 2016

Low inductance impulse winding tester targets power chokes

Optical transport tester supports encapsulation methods up to OTU4

19301A Impulse Winding Tester satisfies test requirements for a wide range of power inductance products from 0.1uH to 100uH including power chokes. Device provides a 1000V impulse voltage, 0.25V resolution and a 200MHz high speed sampling rate to satisfy test requirements. Product’s function is to discover potential defects as early as possible. Defects can be winding layer short, poor electrode welding, and poor internal coil or core insulation. CHROMA SYSTEMS SOLUTIONS

Network Master Flex MT1100A optical transport tester addresses the challenges associated with emerging technologies being integrated into Core and Metro networks, as well as in data centers. Field portable multi-100G transport tester can support native client payloads, including Ethernet, Fibre channel, SONET/SDH and CPRI, into various ODU encapsulation. A powerful, robust instrument for testing OTN signals, unit supports 10GbE client payload using GFP mapping into ODU2 and ODU2 extended payload. ANRITSU

http://ept.hotims.com/61397-71

15

http://ept.hotims.com/61397-75

newswatch

Data loggers communicate wirelessly via Bluetooth

Teledyne LeCroy to acquire Quantum Data

HOBO Data Loggers MX1101 temperature/relative humidity data logger provides Bluetooth to easily communicate with your logger at a distance in environments that you can’t access or do not want to disturb. Unit comes without cords and only requires a mobile device, saving considerable time recording data. Unit operates within a temperature sensor range of -20° to 70°C and a relative humidity sensor range of 1% to 90%. Temperature Accuracy is ±0.2°C. ITM INSTRUMENTS

Teledyne LeCroy Inc., Santa Clara CA, has entered into an agreement to acquire Quantum Data Inc., a market leader in HDMI and SDI signal generators and protocol analyzers, as well as test tools for other digital video technologies. Teledyne LeCroy is a market leader in protocol test tools for well known serial data standards like USB, PCI Express, SAS, and SATA. The firmís strategy is to continue to expand its protocol offerings into additional wired and wireless data communication standards with the goal to be the market leader in each protocol standard.

http://ept.hotims.com/61397-72

In-circuit tester comes in 5U rack-mount instrument form factor U9403A Mini ICT true in-circuit test unit comes 5U rack-mount instrument form factor that can be used standalone or integrated. Product features includes, VTEP vectorless test, Cover-Extend Technology, and digital library tests and boundary scan. The unmuxed per-pin programmable digital engine makes test development really flexible and easy, especially in a situation when device conditioning is needed in functional test. Standard instrument SCPI commands makes it easy to work with other instruments and external test sequencers under IVI VISA architecture. Built-in program scripting tool makes the overall test execution even more flexible for your needs. KEYSIGHT TECHNOLOGIES http://ept.hotims.com/61397-73

Performance oscilloscope probes tackle smaller, faster designs P7700 series of TriMode probes for use with firm’s performance oscilloscopes provides up to 20GHz bandwidth. Devices ease the challenges designers face when debugging circuits found in the latest mobile and enterprise designs by minimizing probe loading, improving access to smaller, more-densely packed test locations and lowering overall cost of ownership. Probe’s input amplifier is located <4mm from the connection point, minimizing signal loss, probe tip capacitance and noise. Product’s signal path is fully characterized and automatically de-embedded from measurement results. TEKTRONIX http://ept.hotims.com/61397-74

http://ept.hotims.com/61397-12

w w w. e p t . c a TM_p11-15_May16.indd 5

EPT_TDK_May.indd 1

2016-04-14 3:36 PM

16-04-25 2:46 PM

16

products on review

electronic products and technology • may 2016

Single fiber optic connectivity solution is smaller, smarter

Digitally controlled PoL converters come in high density packaging

FO1 FiberOptic single fiber optic connector is a miniature, lightweight, rugged connectivity solution that is easy to use and improves performance in harsh environments. Device is available either in pre-configured reels or integrated into custom assemblies meeting growing market needs for higher data transmission rates over long distances, while reducing space and guaranteeing performance by means of rugged miniature solutions. UPC & APC polishing reduces insertion and return losses, making devices more secure, while IP68 sealing provides highly valuable device protection. Product’s push-pull locking system allows quick and easy connections and disconnections, including removable sleeve holder (monobloc mate adapter) to ensure that end faces can be cleaned easily. FISCHER FIBEROPTIC

OKDL-T/6-W12, OKDL-T/12-W12, and OKDLT/18-W12 Okami series of non-isolated pointof-load (PoL) dc-dc converters deliver 6, 12, and 18A respectively, are capable of being monitored and configured via PMBus communications. Exhibiting versatility, products accept input voltages from 4.5V to 14V and have an adjustable output voltage range from 0.6V to 5V (1.8V max for 18A model). Designed for a minimal footprint, the high-power-density LGA modules measure 12.2 x 12.2 x 8.0mm. Devices provide a typical efficiency figure of 91.6% at 12Vin, and are able to operate in a temperature range of -30 to +95C. MURATA POWER SOLUTIONS

http://ept.hotims.com/61397-76

http://ept.hotims.com/61397-82

Metalized polypropylene interference suppression capacitors are RoHS compliant

Laser-based drilling, cutting unit handles flexible circuits MicroLine 5000 UV laser based flex drilling and cutting system is specifically tailored to the needs of the flexible circuit industry. Unit comes with a large working area of 21” x 24” and is available in two different laser power classes, depending on customer needs for various substrates and thicknesses. Product is equipped with precise process monitoring systems as well as intelligent vision systems for fiducial recognition and alignment. LPKF LASER & ELECTRONICS http://ept.hotims.com/61397-77

Dc-dc converter targets medical applications G/H Series 1-2W medical dc-dc converter targets medical applications that meet medical design standard EN60601-1 and ANSI/ AAMI ES60601-1 3rd Edition (1xMOPP/2xMOOP). Both creepage and air clearance of the transformer are 5mm, and 5.5mm for printed circuit board. The isolation voltage is as high as 4200Vac (6000Vdc), which is 40% higher than standard voltage (3000Vac) of 2xMOOP. Leakage current is less than 2µA, which ensures the patient’s safety. Devices operate high efficiency up to 84% to save energy effectively. They have a compact dimension of SIP7 (19.50*9.80*12.50mm) and provide an input voltage range of 5 to 24Vdc and 5, 12, 15, ±5, ±9, ±12, ±15Vdc output voltages. MORNSUN

Sung Ho Electronics CMPS line of Class ‘Y2’ metalized polypropylene interference suppression capacitors are fully RoHS compliant and Safety Agency approved. The 300Vac rated product series has a range of values from 0.001ufd through to 0.56ufd, with lead spacing from 10mm through to 27.5mm. SP INTERNATIONAL http://ept.hotims.com/61397-83

Medical power supply meets high safety standards OBS01 series power supplies for medical applications BF (Body Floating) complies with the latest EMI coexistence standard IEC 60601-1-2: 2014 (4th edition), keeping patient and operator safety in mind. Product delivers an output power of 1100W (1250W peak) and is available in seven different voltages from 24V to 48V with an efficiency up to 89%. Product meets, conducted and radiated EN55011 class B, without requiring any additional components. Unit has an input-to-output isolation of 4000Vac (2xMOPP), an input to ground of 1500Vac (1xMOPP) and a 1500Vac (1xMOPP) output-to-ground when many conventional products offer only 500Vdc isolation. POWERBOX http://ept.hotims.com/61397-84

http://ept.hotims.com/61397-78

Stainless steel cable gland resists micro-organisms, bacteria Skintop INOX stainless steel cable gland with special design features prevent micro-organisms and bacteria from sticking to the surface. Product has an IP68/69K rating and withstands high pressure and high temperature wash downs. Product has a smooth surface, with no edges and is highly corrosion-resistant. Device also provides a wide variable clamping rangeds. LAPP

take off

http://ept.hotims.com/61397-79

Wire, cable cutters quickly cut variety of materials Models HC10, FC10 and HCA20 wire and cable cutters quickly cut many types and sizes of materials. The HC10 is hand operated by use of a lever, while the FC10 utilizes a foot pedal to cut material. Both units can cut material up to 1” OD, depending on material construction. An optional conversion kit is available to change an HC10 to an FC10. Using the foot pedal allows the operator to have both hands free to hold material in place while cutting. Model HCA20 is air-operated and utilizes dual electrical finger switches to activate the blade. This cuts down on operator fatigue as no physical force is needed for cutting. This unit can cut wire or cable up to 1-1/4” in diameter. ERASER

NEW EcoStrip 9380

Welcome to the Future of Entry Level Cut & Strip The EcoStrip 9380 offers the most complete feature set at an economical price point. This flexible machine can be configured with rollers or belt feeding untit capable of short mode processing and is easily operated via the 5.7” color touchscreen and underlying Schleuniger S.ON software. Turn the EcoStrip 9380 into a fully automatic processing line with a wide range of accessories for prefeeding, marking, stacking, coiling and tying. schleuniger-na.com/es9380_ept

http://ept.hotims.com/61397-80

Remote spectrum monitor mitigates interference problems MS27101A Remote Spectrum Monitor interference detecting tools can be used with firm’s Vision software to create a highly accurate remote solution for government regulators and university lab researchers to identify interference patterns, record spectrum history and geo-locate the sources of problem signals to mitigate interference issues and identify illegal or unlicensed signal activity. Unit addresses the market need for an accurate remote solution for white space monitoring, harm claim threshold detection, in-building interference monitoring, positive train control system protection and locating illegal/unlicensed signal sources or similar interference. ANRITSU

“The displays and software are similar from machine to machine. This makes integrating a new piece of equipment into production a smooth transition.” JR Palumbo, Owner, Royce Electronic Sales

To Be Precise.

http://ept.hotims.com/61397-81

http://ept.hotims.com/61397-13

full online product listings at.ept.hotims.com ROB_pg16-17_May6.indd 1

16-04-25 3:37 PM

ENGINEERS START HERE Access 500,000 in-stock electronics products, custom services, tools and expertiseâ&#x20AC;&#x201D;all in one place. Plus, count on customer service that goes above & beyond to deliver your needs. Complete engineering solutions start at Newark element14.

1 800 463 9275 | newark.ca

http://ept.hotims.com/61397-14

ROB_pg16-17_May6.indd 2

16-04-25 3:37 PM

18

electronic products and technology • may 2016

IoT (Internet of Things)

Why pricing for IoT is so confusing

By Peter Thorne, director, Cambashi Ltd.

Brand:

There’s a pattern in technology pricing, and the signs are that this pattern is emerging again for many of the technologies associated with the Internet of Things (IoT). Cambashi calls the pattern the ‘Henshell Curve’ because it was a discussion with Cambashi associate Dr. Richard Henshell that crystallized our thinking into the price development trend curve shown in the diagram. There are four phases:

Risk: In this first phase, the technology might come from a university for free or it might cost a fortune if you commission a development team to create it for you. Each vendor in the market (and there are many) offers a different bundle of functions at a different price. We call this the risk phase, because the chosen provider may not stay the course; the technology may not develop in the way it was planned, and these changes could leave your investment stranded. There are no benchmarks to measure against. Throughout this phase the top priority for the buyers and users of the technology is to manage risk and make sure their vision of the potential benefits is a reasonable balance for this risk. This phase draws to a close as the market converges around one definition of price and function.

Function: Many, but, not all vendors survive into this second phase. The survivors make money, because the market grows fast and the price tends to rise, so quite a large population of vendors can prosper. The key competitive factor for the user is now function, and the leading vendors invest to deliver new functions to beat the competition. The signal for the end of this phase is the appearance of a new entrant offering 80% of the function at 20% of the price.

Price: In this phase, functional bundles are well-defined and well understood and price becomes the main competitive weapon. Part of the market discovers that the 80% offer is all it needs. Market leaders come under pressure and prices start to fall. This is a very challenging phase for larger companies, which have to find leaner business models in order to stay in the business.

IoT security requires a shift in mindset By Harbor Research Inc.

To best mitigate ever-expanding threats to security and privacy, organizations must change their ways of thinking about security. This shift in mindset is one that addresses security through a fundamentally broader scope at every level of the interaction. What organizations and consumers alike must realize is that, while hacking seemingly occurs at a single endpoint–a thermostat, for example– the inherent systemic architecture, i.e. the network, that supports any single device renders vulnerability far greater than any single device.

Examples of cyber intrusions and security breaches are everywhere. Single consumer devices–synonymous with ‘IoT’ for many people – are where we have seen the news headlines. But these are only the tip of the iceberg– and so are their security risks. Several security firms have found that many consumer devices are vulnerable to even the most basic hacking attempts. Some have made headlines, while others have quietly flown under the radar. • Strangers hacking into baby monitors, spying on little ones. • Security researchers hacked into a smart refrigerator by intercepting communications between the fridge and its user’s Google Calendar. • A hacker developed a $32 device to hack into cars and garage door openers. Then there are the larger examples; examples we have barely tasted in their potential scale. Security vulnerabilities in larger contexts, in or across [fleets of] cars, buildings, factories, or even the grid,

transcend ‘creepy,’ privacy, even security of proprietary information. They can have profound impacts on people’s safety and their lives. • Security researchers successfully took control of a Jeep Cherokee while it was on the road and were able to remotely control some functions. • Retailer Target’s infamous customer identity and financial breach was a result of hackers penetrating the company’s HVAC system service provider to gain access to Target’s network passwords. • Hackers revealed significant vulnerabilities across multiple brands of connected lightbulbs and lighting solutions. In each example, seemingly mundane components introduce new risk as they exist and transmit data across one or more networks in a system. In a world where objects and environments are digitally connected and placed onto networks, objects themselves become windows of data transmission and collectors of potential insight and utility– but also potential vulnerabilities.

After the price wars, the survivors have a technology which is accepted at a price point that leaves a small profit margin. The technology tends to be treated as a commodity item and the key competitive factor is brand. Vendors use strategies such as portfolio planning, and addon services to smooth out their revenue and profit curves as one or more technologies progress through these phases. Each phase attracts different types of customer, from the adventurous, experimenting with the new technologies during the risk phase, to the very cautious, who buy only from respectable brands, after the price battles are over. The specific piece of research that triggered this article was some work we had done to look at ‘cloud providers for IoT.’ This category fits into one of the six layers we use to segment IoT technology. There are of course some category gorillas, for example, Amazon Web Services for IoT; IBM Cloud (integrated into its Bluemix environment, which addresses IoT and other environments); PTC’s Axeda cloud offer alongside Thingworx; Microsoft’s Azure IoT Suite. But you don’t have to look at this category for very long to find there are many providers, all offering something special, all with their own local or industry focus points. The available editions and pricing plans fill the shaded area in the risk phase. Some, but not all of these providers are destined for greatness, there are too many to list here, so apologies to those I haven’t included, but if you look, in no particular order, at: http://sensorcloud.com; https://www.carriots.com; http://www.arrayent.com/platform/#features#jump2; http://www.zatar.com; https://grovestreams.com/index.html; https://www.aylanetworks.com/products/iotplatform; https://electricimp.com/platform; https://exosite.com/architecture/scalability I think you will get the right impression. Is this true across the whole of the technology and tool stacks you need for IoT? No, not entirely. For example, software development tools largely follow well-defined functionality bundles. But the picture is never static, there’s always room for a new entrant, whether it’s at the left hand side of the diagram (introducing a new technology), or as the disruptor, offering 80% of the results at 20% of the price and forcing the market into the price phase. That’s why this is a market that is fun to watch!

Wavefront’s connections help Parasol shine Greater Vancouver-based Parasol Advanced Systems Inc. has developed a line of high technology products that puts a whole new spin into the world of theatrical staging and lighting. Parasol’s technology allows lighting designers to add an entirely new dimension of movement to existing theatrical presentation devices, such as projectors, LDE walls and moving head lights. Parasol’s technology and products have been featured on American Idol, at Disneyland and in the Step Up 5: All In 3D movie, to name a few. The New Westminster BC firm experienced success since incorporating in 2006, but ran into a stumbling block a year ago when its first show in Japan saw opportunities for improvement. Company founder Hermann Fruhm sought out advice from the National Research Council of Canada Industrial Research Assistance Program (NRCIRAP) who recommended that the company work with Wavefront to source the appropriate expertise in their field. This introduction proved valuable, as Wavefront was able to connect Parasol with the help it needed and NRC-IRAP further supported this collaboration through its Business Innovation Access Program (BIAP).

Wavefront pulled in some extra help from its network “We suspected the problem was a wireless communication issue due to excessive path loss between the industrial wireless controllers – and the elevated noise floor that happens in the 2.4 and 5.8GHz ISM bands at concert events,”says Alan Swain, VP technology & operations. Wavefront pulled in some extra help from Karl Reardon, a senior engineer in Wavefront’s Trusted Partner network. Reardon resolved the issue using 5.8GHz wireless transmitters connected directly into a leaky coaxial cable antenna system installed along the lighting trackway; similar to technology used in automated transit systems such as Vancouver’s Canada Line. He combined this with quick connectors for easy assembly and disassembly. This implementation resulted in a robust solution that was virtually immune to interference from all other sources commonly found in concert venues. With the light display ready to go, Parasol Advanced Systems took it back to Japan for the Rizin Fighting Federation 2 mixed martial arts event at the Saitama Super Arena - which turned out to be a huge success.

full online product listings at ept.hotims.com IoT_pg18-19_May16.indd 1

16-04-25 2:54 PM

IoT (internet of things)

electronic products and technology • may 2016

19

Circuit building blocks reduce the size, power of IoT designs

What IoT, smart home device makers need to know in order to connect their devices to the web

Circuit Seed, a new family of circuit building blocks for processing analog signals using fully digital components and design flow, is now able to significantly reduce the size and power of circuits, helping companies provide new offerings that the Internet of Things (IoT) will require for future product development, especially those products that assist the health of people and planet, according to Greg Waite, CEO of InventionShare. Speaking from his Ottawa office, Waite says, “Circuit Seed is a significant game changer for the IoT and for the industry. What we have here is a major breakthrough for the IoT sensor markets. By integrating digital circuits which process analog signals – by their nature, small, low power, with higher accuracy, and which are inexpensive to design and manufacture - there is an opportunity to satisfy the consumer and business markets for sensors.” Medical device and smartphone healthcare monitoring and diagnostic technologies is a very large and burgeoning market. Medical device companies are recognizing that decentralized diagnostic and therapeutic technologies will dramatically outpace traditional lab services. “The likelihood of accurate point of care technologies being at a physician’s office, with lighter versions being mobile, in the near future is very high. We are not talking about simple heart beat and blood pressure apps; we are talking about very accurate vital measurements, but also breath and fluid analysis to detect levels of toxins, viruses, bacteria, diseases, drug levels and, yes, even cancers. Water quality, food quality, air quality all affect health and have a big impact on people and planet. You can’t talk health care and not talk about the planet, food and quality - and the environment in general,” adds Waite. The sensor market is growing at a record pace, partly because of the new applications as a result of Internet communications. Sensors can be field-programmable from an Internet connection, monitored in real time and, then, be collection points for big data that leads to better management decisions and increase reaction times. Traditional markets for sensors have been industrial, health sciences, infrastructure, energy, transportation, security and public safety, mining and consumer home. Sensors are typically phase or pulse technologies. Circuit Seed foundation inventions provide superior characteristics for both designs. Circuit Seed inventions are founded on a mixture of decades of experience and creativity, supported by a robust portfolio of IP. Circuit Seed introduces a dramatic shift in the existing way of designing analog circuits, effectively eliminating many of the known shortcomings. Benefits include: unprecedented precision without precision parts; ultra-linear operation over an extreme dynamic range (>106); low noise, ultrahigh speed (analog at logic speed) and extreme low voltage (down to ~0.1V power supply); process parameter independence; compact footprint (amplifiers about the size of a couple of NAND gates); low power (~100uW for multi-GHz-range operation down to 10pW for KHzrange operation); and portable designs between ultra-deep sub-µm CMOS technology process nodes. This paradigm shift has eliminated the use of current mirrors or differential matched pairs with traditional bulky analog transistors while being able to recover from sleep mode at logic speed. Simulation and silicon test results have demonstrated a dramatic reduction in power, better performance and higher accuracy, all with small integrated circuit footprints. The circuit designs are much simpler, reducing product costs with faster development, so less testing is required and there are fewer parts to assemble. These circuits are far more reliable in the newest CMOS processes, making Circuit Seed a real B OONfor sensors and IoT future products. “Due to the IoT, semiconductor companies are now looking for ways to support manufacturers” ever increasing demands to make products that are smaller, lighter, faster – products that consume less power, give off less heat and that are easier, quicker and less expensive to design, manufacture and test,” says Waite.

about recurring services and recurring Worldwide, thousands of technology revenue streams, not (only) about paying companies are viewing the Internet of for a product at the check-out register. Things and the Smart Home as the Holy Grail for their products and profits. Most 2. Customers are buying solutions for industry analysts and leaders are predictproblems, real or perceived. They are ing that hundreds of millions of homes looking very specifically for things like will want these new technologies. ‘security’, ‘energy control’, ‘assisted livHowever, before the device makers ing’, etc. And they want to be able begin to design and develop new soluto monitor and control these different tions, they need to understand that solutions from the same place – a single this market is rapidly changing and dashboard. They don’t want to have to evolving, especially when looking at the use a variety of different apps with differSmart Home and the consumer electronent user interfaces (UI) to manage their ics market. This is a moving target that homes and their family’s life. manufacturers need to understand. First off, the Internet of Things – especially for the Smart Home, is not about things, but instead, is about services that will make consumers’ lives more comfortable, more secure and more efficient. Energy control, security, improving the efficiency of daily life, etc. Unfortunately, the label of the IoT with the word ‘things’ puts many people on the wrong path of thinking. The Family Lifestyle system uses sensors, connected devices, cloud Things are the necintelligence, and social media to combine a variety of important essary enablers, but services into a simple to use app that enables service providers to the complete solution make their customer’s lives easier and more secure. includes data analytics, smart phone apps and billing/support systems as well. There Manufacturers and service providers is an entire ecosystem at play, in which need to work together – to bring all the things play a (minor) role. different home equipment and services Also, many people confuse IoT things together under a single umbrella with a with connected devices. It is not enough common UI – a single app (Smart Home to just web connect a device – it needs Butler) that lets the family members, to be able to speak to other devices and understand what is happening in their systems in the home, as well as to be home and enable them to manage it, if able to become smart – to utilize web not managing it for them. intelligence, so that is more than just a Device makers need to be very precise remotely operated sensor or actuator. in what problem they are solving for their If a manufacturer wants to be successcustomer, and evolve away from simply ful in the new and highly competitive marketing the ‘concept’ of connected Internet of Things market, it needs to devices. understand two important concepts: The end game is connected solutions that make our lives easier, safer and more 1. The Internet of Things and the efficient. Device makers and service proSmart Home is not about pushing prodviders need to look at the BIG picture, not ucts (‘things’) out of the door, but it is just the components and the individual about reinventing products into services. machines and devices. Internet of Things business models are

IoT comes to the factory Cost, efficiency and safety are driving the much-hyped Industrial Internet of Things (IIoT) as companies worldwide in a wide range of industries look for opportunities to connect nearly everything in the industrial workplace, according to a report from Lux Research. “In cases ranging from wearables to real-time location systems in large yards, vendors like Equivital and PINC Solutions are establishing a clear value proposition in the quest to find viable business cases,” says Isaac Brown, Lux research analyst and lead author of the report. “Goals range from employee safety to simple efficiency improvements in asset management - but users need to remain cautious about practical obstacles to proving this value in real operations,” he adds. According to the taxonomy developed by Lux Research, connected assets fall into four distinct categories: equipment, people, goods and environments. The IIoT systems that connected them have six discrete components, following the signal path from the sensors that measure the world around us through the actions taken by operators. Lux Research analysts identified several case studies that demonstrate distinct value propositions. Among the highlights: • Daimler ups operational efficiency. Using PINC Solutions’ RFID-based systems, Daimler achieved 99% trailer yard accuracy and 50% reduction in trailer move time in its 1.3-million-sq ft plant. • Equivital raises safety. Equivital demonstrated employee health and safety with a deployment of its IIoT systems at a chemical plant. At the heart of its EQ-02 LifeMonitor is a wearable that workers carry around their chests, which has led to a drop in injuries. • Sight Machine brings optimization. By collecting and analyzing real-time data at multiple factories, Sight Machine helped an apparel manufacturer identify underperforming factories, optimize processes, and recommend a more effective preventive maintenance schedule.

By Cees Links, CEO of GreenPeak Technologies

in support of

23rd Annual Electronics Industry The

GOLF TOURNAMENT

June 9, 2016 Shotgun start at 12 noon

sponsored by

Glen Eagle Golf Club Hwy 50, Bolton, Ontario

www.gleneagle.ca/toronto_golf_club.html

For more information contact EP&T at: • 416.510.5207 • pdloney@ept.ca

w w w. e p t . c a IoT_pg18-19_May16.indd 2

16-04-25 2:55 PM

20

electronic products and technology • may 2016

Embedded Systems & Engineering Software

The pcb design ecosystem

Access to design IP and collaboration is key to meeting the needs of engineers in electronics product design By John McMillan, Mentor Graphics Corp.

In printed circuit board (pcb) design, a product creation ecosystem enables engineers to address the nuances of design early and throughout the technology development cycle. From component selection to manufacturing output, a robust, scalable and unified pcb design tool is needed to meet critical performance, schedule deadlines and cost challenges. Yes, today’s high-tech products are faster, smaller, and smarter than ever and the time-to-market demands to deliver high-quality products that are competitive, cheaper and faster means that design tools must be able to consider every aspect of the design throughout a product’s creation, from functional specification to end-product performance. And with IoT, Bluetooth, WiFi, and RF technologies everywhere, design concerns related to mixed signals, power consumption and thermal analysis must be measured and addressed throughout every stage of the design, from the component level through to final assembly.

Unified tools

Managing the pcb design ecosystem from within a unified design tool enables engineers and pcb designers to leverage design IP with the final product in mind, analyzing and validating each aspect, effect, and impact encountered along the way. From part selection, design reuse, simulation, and early collaboration with MCAD, the design ecosystem can ensure end-product success.

Collaboration within the pcb design ecosystem From the earliest stages of component selection, each critical parameter must be considered. Access to qualified components and component and symbol management are key within the ecosystem. Library databases must be kept in sync

Collaboration within the pcb design ecosystem.

and up-to-date to ensure that availability, manufacturability and inconsistency issues are avoided. Having a single, integrated, centralized library, access to a qualified component portal for research and supply of qualified library symbols and a built-in synchronization mechanism that alerts you and makes necessary updates whenever a database mismatch occurs, are critical to creating and maintaining the component library in the ecosystem. Constraints drive component placement and routing. From differential pairs to clock signals to transmit-and-receive lines, trace spacing and length rules must be understood, applied and adhered to. A design ecosystem that ensures constraints are maintained and stay synchronized through each step of the pcb design flow is essential. Today, most pcbs have multiple FPGAs and more than 90% of nets have highspeed constraints. In the pcb ecosystem the importance of a unified constraint management system that spans both schematic and layout environments ensures

that design integrity is implemented, applied, and maintained throughout the design process. Engineers also need to quickly assess voltage-drop issues of power delivery networks (PDNs). The ability to analyze and simulate power rails for FPGAs, ASICs and other components with tight tolerances throughout the pcb layout phase and within the design ecosystem, ensures clean power and reference voltage to active devices and prevents malfunctions or failures due to excessive voltage loss. Thermal analysis is another important design element in the ecosystem. By exploring and accurately simulating the design space, pcb designers can consider the effects of all aspects of the design, including package selection, pcb layout, board structure, and the enclosure, to ensure that the most cost-effective cooling solution is chosen. To be a true ecosystem, there must be collaboration between ECAD and MCAD. Communicating design intent between electrical and mechanical CAD systems through true, real-time MCAD collabora-

tion enables designers and engineers to import and collaborate on exact 3D models of the board outline, mechanical enclosure, mechanical components and even other pcb mezzanine or daughter cards at any time throughout the design process. Though often thought of as a postdesign process, design checks are an important part of the pcb design ecosystem that should be considered throughout the design flow. Design rule checks (DRC) and design for fabrication checks not only ensure that product performance is optimized, but that design integrity is not compromised during fabrication. With built-in features like DFT (Design for Test), DFM (Design for Manufacturability) and DFA (Design for Assembly), you can ensure the lowest possible product cost, the fastest possible process cycle time, and the highest possible first-pass yield.

Putting it all together

Designing within the pcb design ecosystem on a single platform ensures that designs are robust, reliable and can achieve first-pass design success which results in meeting tight schedules by eliminating re-spins and keeping costs low. Pcb design tools that support an ecosystem approach also enable designers and engineers to address every aspect of product creation from beginning to end. From system simulation to design capture through to layout, DFM analysis, design archiving, and collaboration between and with each technology area of pcb design, PADS electronics product creation platform delivers a powerful and scalable ecosystem that enables individual engineers, designers, and small teams to design, lay out, and validate highquality products, from concept to reality.

For more information on pcb design from Mentor Graphics Corp go to http://ept.hotims.com/61397-85

Bluetooth simplifies embedded system development

Fanless mini PC comes with dual expansion slots

QNX SDK Bluetooth Connectivity software development kit simplifies the integration of Bluetooth connectivity into embedded devices for the medical, industrial and consumer appliance markets. The middleware solution is designed for flexibility and provides a dual-mode Bluetooth Smart Ready stack that supports classic Bluetooth connectivity, as well as connectivity to Bluetooth Low Energy devices. Product is also highly modular, allowing developers to create scalable, future-ready designs that can readily support new Bluetooth profiles. Developers can choose from a comprehensive set of pre-integrated profiles, including the classic PAN, SPP, HDP, HID, FTP, and OPP profiles, as well as the BAS, FMP, HRP, HOGP, and PXP Low Energy profiles. Product complies with the latest Bluetooth Core Specification, 4.2. QNX SOFTWARE SYSTEMS

Model LPC-720F fanless mini industrial rugged PC includes builtin dual expansion slot capability designed for a large variety of demanding applications. Product can be configured with two PCI slots or two PCIe x1 expansion slots. Ideal applications would be for data acquisition, specialized graphics cards and expanded I/O cards. Optionally dual solid state drives (SSD) can also be configured to give expanded internal storage capacity. The powerful mini-computer operates without noisy cooling fans that could draw in dirt and dust potentially causing catastrophic failures. Unit is encapsulated in a rugged extruded aluminum chassis performing as a heat sink to dissipate heat build-up and provides noise free operation. STEALTH

http://ept.hotims.com/61397-86

http://ept.hotims.com/61397-88

3U cPCI computing solution maximizes MIL-STD-1553B 75PPC1-FT3-AR1 Quad Core Power PC, 3U cPCI COTS Single Board Computer (SBC) solution is targeted at military and avionics platforms that require high density communications and performance in SWaPconstrained environments. Product is powered by NXP’s 1.2 GHz Quad QorIQ P2041 PowerPC processor, and is configured with quad channel, dual redundant, MIL-STD-1553B and 12-channel ARINC 429/575 Tx/Rx communications bus ports. The 3U cPCI rugged SBC leverages firm’s modular COTS products built on an open systems architecture (COSA) allowing technology insertion and conforms to all open standards. NORTH ATLANTIC INDUSTRIES http://ept.hotims.com/61397-87

Computing tablets are fully ruggedized Endurance Tablets are fully ruggedized computing tablets that go beyond the standard and fit into a variety of operations in rough environments. Products enhance the user experience with a brilliant display and a broad set of already integrated I/O and connectivity functions. Equipped for extreme environments, unit functions while submerged in water, covered in dust, high heat, frost, shock and even after dropping. Product features Intel Core i5 5350U 1.9GHz or Intel Atom E3827 1.75GHz, and is available with a long list of accessories and a broad range of peripherals. KONTRON http://ept.hotims.com/61397-89

full online product listings at ept.hotims.com ES_pg20_May16.indd 1

16-04-25 2:57 PM

ProductSource

21

electronic products and technology • may 2016

product source feature product source feature product source feature Amphenol Sine Systems A Series™

High Density, High Current Inductors

Amphenol Sine Connectors were designed as a highperformance, cost-effective solution within the Heavy Equipment, Agricultural, Automotive, Military, Alternative Energy and other demanding interconnect architectures.

MPS’s new HWI4427 and HWI4434 series of Helical Edge Wound (HEW) High Current Inductors offers the highest current density package size in the industry. These inductors offer a wide range of inductance values from 1.4µH to 83µH and rated current up to 122 amps or higher in a very compact package. Various mounting options are also available, including mounting clip and base for extra, added support and resistance against vibration and shock.

J-SQUARED TECHNOLOGIES INC www.jsquared.com

MPS INDUSTRIES

http://magnetic-components. mpsind.com/category/high-current-fixed-inductors

Tel: 855.365.2188 • inforequest@jsquared.com http://ept.hotims.com/61397-15

Contact email: sales@mpsind.com http://ept.hotims.com/61397-17

http://ept.hotims.com/61397-16

Let There Be More Light! OTTO’s LP9 momentary snapaction lighted pushbutton series has a new fully illuminated button option. Choose between six standard LED colors in either 2V or 12V DC with flush or raised dome style. Customize with lettering, a legend or your logo.

847-428-7171 info@ottoexcellence.com www.ottoexcellence.com http://ept.hotims.com/61397-18

So Affordable, Every Worker Can Carry One

−

The new three- and five-position power connectors in the PRC series enable you to reliably and conveniently connect AC cables to your equipment for current upto 35A/600V. The device connectors with crimp connection are supplied pre-assembled with stranded wire leads. Alternatively, they can be terminated with available tooling.

Tel: 800-890-2820 • cdinfo@phoenixcontact.ca http://ept.hotims.com/61397-21

Custom Graphic Overlays We design, prototype and manufacture the highest quality graphic overlays for your exacting standards, while adhering to ISO/ TS 16949 Quality Management System. Whether you require graphic overlays for a membrane switch or as a standalone object, we can provide a fully customized and high quality solution to your specifications. Contact us for a free quote or to learn more about this product. AMPCO MANUFACTURERS INC. www.ampcomfg.com Tel: 604-472-3800 • sales@ampcomfg.com http://ept.hotims.com/61397-24

http://ept.hotims.com/61397-20

http://ept.hotims.com/61397-19

IP67-protected circular connectors for power electronics

PHOENIX CONTACT www.phoenixcontact.ca

© Copyright 2016 OTTO Engineering, Inc. All rights reserved.

Thermal resistance, 75°F 5-7 x 10-6 K•m2/W Thermal conductivity, 75°F 3.17-3.61 W/(m•K)

+1.201.343.8983 ∙ main@masterbond.com

Designed for tower climbers, Gap Wireless offers the next generation in Personal RF Monitors. The FieldSENSE 2.0 is specifically designed for protecting personnel working near broadcast and telecommunications transmitting antennas from EMF overexposure. The frequency range of 50 MHz - 6 GHz and advanced data logging make this the only RF monitor you will ever need. GAP WIRELESS www.gapwireless.com Tel: 855.826.3781 • info@gapwireless.com

http://ept.hotims.com/61397-22

OrCAD Capture is FREE

http://ept.hotims.com/61397-23

Lens Assemblies For Any Application •

For the first time ever, OrCAD Capture is free! For a limited time only, you can purchase an unlimited number of seats of the OrCAD Capture perpetual license while only paying $390 (per seat) for the first year maintenance. Concerns about budget will no longer keep you from starting your next project! Learn more about this promotion and other special bonuses you’ll receive with this offer. go.ema-eda.com/Free-Capture1

• • • • • •

High-Res Lenses, UV Quartz Lenses Medical Imaging Lenses CCD/CMOS and CCTV Lenses Diode Laser & Image/Barcode Lenses Lens Mounts, Filters and Accessories Photographic Lenses, Microscope Objectives & Eyepieces Your Custom Lens, From Prototype to Production

PRODUCT SPECS NOW AVAILABLE ONLINE 1000s of Lens Sizes in Stock. Most Lenses Ship Same Day.

SINCE 1949

UniverseOptics.com

1-516-624-2444 info@UniverseOptics.com

© 2016 Universe Kogaku (America) Inc.

http://ept.hotims.com/61397-25

http://ept.hotims.com/61397-26

products on review

Medical external power supplies deliver Class II input, level VI efficiency DTM65-C8 series of medically certified external power supplies provides a class II input, thus does not require an earth ground connection and meets the stringent Level VI DoE standards for efficiency. Product is also certified to the IEC 60601-1 and 60601-1-11 medical standards, making it suitable for a variety of healthcare applications. Unit is housed in a rugged, vent-free IP21 rated enclosure, measuring 106 x 60 x 31mm. Ac is applied using a standard IEC60320-C8 cable and dc provided through a four pin Power-DIN connector. TDK-LAMBDA http://ept.hotims.com/61397-93

PrdtSrc_pg21_May16.indd 1

650W front-end power supply is packed in 1U format D1U54P-W-650-12-HBxC series of 650 Watt power supplies are packaged in an industry standard 1U format measuring 54.5 x 40mm, has a length of 228.6mm (9-inch) compared to the 12-inch length of other units. Delivering a power density of 21.4 Watts per cubic inch, the compact unit exceeds the 80 PLUS Platinum efficiency requirements. Featuring a single 12Vdc primary supply, product provides a standby 12Vdc/2A output. Hot pluggable units are capable of N+1 redundancy and feature an active current sharing (ORing FET) permitting connecting up to a maximum of eight in parallel. MURATA http://ept.hotims.com/61397-94

16-04-25 2:59 PM

22

products on review

electronic products and technology • may 2016

engineering TECHNICAL TECHNICAL && WHITE WHITE PAPERS PAPERS How to Choose the Appropriate Rack Size for a Chassis System n Select the appropriate number of slots for your system and plan for future additions n Choose the appropriate size system for your application n Expand on an existing chassis system using a daisy-chain system

Line of heat shrink tubing is available as thin wall in 6”, 48”, 25/50 and 100 foot spools; or dual wall with adhesive in 6” and 48-inch lengths; or medium wall with adhesive; or thick wall with adhesive. Products come in assorted sizes and color kits, including black, blue, red, green, yellow, white, clear, brown, grey, orange and violet. Custom cut sizes available. The UV resistant Thin Wall product has 2:1 shrink ratio and comes in diameters 3/64” through 2”. The Dual Wall product provides 3:1 shrink ratio and comes in diameters 1/8” through 1.5”. The Medium & Thick Wall product provides a 3:1 shrink ratio and is available in diameters .470” through 4.72”. NTE http://ept.hotims.com/61397-90

Download our whitepaper at HARTING.ca HARTING Canada Inc. http://ept.hotims.com/61397-27

Heat shrink tubing suits variety of applications

LIN controller ICs are fully integrated, universally-useable

Precision cleaners suit pcbs, production areas

MLX81107/MLX81109 LIN Controller ICs combine high degrees of built-in functionality and low unit costs. Freely-programmable, monolithic devices are able to address growing demands within the automobile industry for LIN-based switches, actuators, drivers, sensor interfaces and LED lighting systems. Both devices incorporate a physical layer LIN transceiver, LIN controller, voltage regulator, 16-bit RISC-based microcontroller, 32kBytes of Flash memory and 20-channel analog-to-digital converter (ADC), as well as possessing 16-bit pulse width modulation (PWM) capabilities. Product is compliant with LIN 2.0, LIN 2.1 and LIN 2.2, as well as SAE J2602. MELEXIS

Universal Flux Remover is a highly effective cleaner for the rosin-based, hightemperature, lead-free materials that are so difficult to clean. Product is formulated for cleaning electrical contacts, relays, switches and circuits. It is non-conductive, fast-drying, non-flammable with improved materials compatibility. Polar Flux Remover is an aggressive choice for cleaning heavy, aged fluxes and pastes found in pcb repairs.

http://ept.hotims.com/61397-91

EPTECH 2016 Series

of Regional High-Tech Electronics Shows LEARN more about products related to: • Wearable Technology • Printable Electronics • 3D Printing • Internet of Things • Test & Measurement • Product Development/Manufacturing

PLAN to attend if you are an: • Engineer • Designer • Technician • Purchaser • Technical & Senior Management ... or are involved with electronics

SEE thousands of leading-edge products & services on display: • Passives • Switches • Wire & Cable • ICs • Test Equipment • Relays • Tools • Electronic Components • Industrial Electronics • Peripherals • Hardware • Data Acquisition • RoHS Compliant Products • E-Commerce • CAE/CAD Systems • Semiconductors • Connectors • Batteries • Sensors • Chemicals ... and many more

CALGARY • March 1 • 10am-4pm The Coast Plaza Hotel & Conference Centre

MONTREAL/POINTE-CLAIRE • April 19 • 10am-4pm Holiday Inn & Suites Pointe-Claire

QUEBEC CITY •

Hotel Plaza Quebec FREE Registration! Free Parking! Seminar information at: www.ept.ca/eptech-seminars/ To exhibit, contact: eptech@ept.ca

Acculogic, Inc . . . . . . . . . . . . . . . . . . . . . 21 Blockmaster Electronics, Inc . . . . . . . . . 21

June 2 • 10am-5pm

September 27 • 10am-4pm

HALIFAX •

September 29 • 10am-4pm Dartmouth Sportsplex

MISSISSAUGA •

October 25 • 10am-4pm Mississauga Convention Centre

OTTAWA •

October 27 • 10am-4pm Brookstreet Hotel

Data Cable Co Inc . . . . . . . . . . . . . . . . . . 21 Digi-Key Electronics . . . . . . . . . . . . . . . . . . . 2 Electro Sonic Group Inc . . . . . . . . . . . . . . . 3 EMA Design Automation . . . . . . . . . . . . 21 GAP Wireless . . . . . . . . . . . . . . . . . . . . . 12, 21 Hammond Mfg. Co. . . . . . . . . . 9 (insert), 23 J-Squared Technologies . . . . . . . . . . . . 6, 21 Keysight Technologies . . . . . . . . . . . . . 13, 24 Master Bond . . . . . . . . . . . . . . . . . . . . . . 21 Mornsun Power . . . . . . . . . . . . . . . . . . . . . . . 4 MPS Industries . . . . . . . . . . . . . . . . . . . . . . 21 NEWARK . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Otto Engineering . . . . . . . . . . . . . . . . . . . . 19 Phoenix Contact . . . . . . . . . . . . . . . . . . . . 21 Pixus Technologies . . . . . . . . . . . . . . . . . . . . 8 Protocase . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Attendee Registration:

www.ept.ca/eptech/register/

ROB_pg22_May16.indd 1

Allied Electronics, Inc . . . . . . . . . . . . . . . . . . 5 Ampco Manufacturing . . . . . . . . . . . . . . 21

MARKHAM • April 21 • 10am-4pm Le Parc

Hard Rock Casino Vancouver

http://ept.hotims.com/61397-92

ADVERTISERS’ INDEX

EDMONTON • March 3 • 10am-4pm Doubletree by Hilton (formerly The Mayfield Inn)

VANCOUVER/COQUITLAM •

Tergo high performance flux remover is a non-flammable, low-temperature cleaning fluid for use in vapor degreasers. Product provides a non-volatile additive specifically engineered to clean challenging solder pastes and flux residues, stubborn white residues and even watersoluble (OA) fluxes. MICROCARE

Schleuniger . . . . . . . . . . . . . . . . . . . . . . . . . 16 TDK- Lambda Americas Inc. . . . . . . . . . . . 15 TestEquity . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Universe Kogaku . . . . . . . . . . . . . . . . . . . . 21

16-04-25 3:00 PM

http://ept.hotims.com/61397-30

http://ept.hotims.com/61397-28

http://ept.hotims.com/61397-31

http://ept.hotims.com/61397-29

http://ept.hotims.com/61397-32

http://ept.hotims.com/61397-33

IBC OBC_May16.indd 1

16-04-25 1:08 PM

They. Just. Work. Discover the versatility of Keysight Data Acquisition Units. The Keysight 34970A and the 34972A data acquisition (DAQ) units were designed with one goal in mind: simplicity. There’s no programming. All you have to do is select the measurements you need and your DAQ will do the rest. Also their built-in 6½ digit multimeter offers ultra-low reading noise. With unprecedented peace of mind and a competitive price, it’s easy to see why Keysight is the number one name in DAQs. Keysight Data Acquisition Units — 34970A and 34972A Built-in signal conditioning enables 11 measurement functions: temperature, voltage, frequency and more Measure up to 60 differential channels, up to 300 DC/AC volts BenchVue software-enabled to control, view and analyze data

Data log and visualize with Keysight’s BenchVue software.

Learn more with our test challenge measurement briefs and videos at www.keysight.com/find/daqpromoUS Buy from an Authorized Distributor: http://ept.hotims.com/61397-34

© Keysight Technologies, Inc. 2016

EPT_KeysightOBC_May.indd IBC OBC_May16.indd 2 1

2016-04-14 16-04-25 1:08 2:40 PM PM