1/2” GEN2 6ksi Pressure Regulator-Hydraulic Pilot | Technical Marketing Sheet
Reliable regulator suited to provide hydraulic control systems with stable regulated system pressure. The 1/2” GEN2 Pressure Regulator designed with guided hydraulic damping seal technology reduces pressure oscillation, hunting, chattering, and overcorrection, lessening leaks and failure points. Tungsten Carbide seal trim is precision lapped to provide benchmark reliability and debris tolerance with wiping action that resists contamination and leaking. The improved deadband performance assures a precise response. FUNCTIONAL DESIGN SPECIFICATIONS
Figure 1. PN 29252, 1/2” GEN2 Pressure RegulatorHydraulic Pilot
Features and benefits •
Qualification exceeds API 16D requirements. Two endurance qualification tests at 5000 and 7500 cycles
•
Rated for supply pressures up to 6000 psi
•
Wider regulated set pressure ranges
•
Tungsten Carbide seal trim for debris tolerance
•
Dynamic Plunger T-Seal
•
Improved Corrosion Resistant Alloy Construction
•
Field serviceable
Maximum Inlet Pressure
6,000 PSI
Fully Open Flow Coefficient (Cv) Regulated
0.5
Fully Open Flow Coefficient (Cv) Vent
0.2
Set Point Range
1,000-5,000 PSI
Typical Deadband at 6,000 psi Supply
300+100 PSI
Fully Open Max Regulated Flow Rate
25 GPM
Predicted Cycle Life
7500 cycles
Operating Temperature Range
32 F to 150 F
Acceptable Operating Fluid Types
Water or mineral oil-based control fluid
Mounting Restrictions
No known restrictions
US Patent
10,739,796
Figure 2: PN 29252
0
0
Figure 3: PN 29252
Figure 2&3: PN 29252, 1/2” GEN2 Pressure Regulator-Hydraulic Pilot
INFO@Gilmore.com www.gilmore.com
1/2” GEN2 Pressure Regulator-Hydraulic Pilot 6.20.2025