GH Form is a Danish design and manufacturing company that collaborates with leading architects to develop urban furniture, while focusing on design, quality and sustainability.
We develop, produce, market and sell urban street furniture. Our new products are developed by our own production department in partnership with designers, architects and our own engineers and production staff.
We make products that can last for generations. Our use of sustainable materials, attention to detail and collaborations with the best designers help us to make a positive contribution to the urban spaces of the future. Design can be sustainable when it is appreciated.
We guide our customers all the way through the process by providing them with guidance, advice and documentation as well as by assisting with the installation of our products.
Recent years have seen GH Form focusing on the environment; both in terms of how our products are made and with their disposal and recycling when they reach the end of their service life. It is our ambition to minimise the direct and indirect environmental impact of our products and to continuously improve our environmental performance.
We only use FSC ® -certified species of wood that are not endangered. We are always on the lookout for any developments in the heat treatment of Nordic wood species.
Many of our benches are made to custom measurements and radius for individual projects.
We use only 100% recycled iron to make our cast iron products. This helps us to achieve sustainable management and an efficient utilisation of natural resources.
PRODUCT RANGE OF BENCHES, ROUND BENCHES AND PICNIC SETS
We develop customised benches for projects. These benches are made of Scandinavian solid timber, heat-treated timber or solid FSC®-certified mahogany.
Our product range for benches in urban spaces includes various series of benches, round benches and picnic sets We have been developing benches and plinths for urban spaces in numerous different designs and colours since 1995. Our bench legs and supports are made of cast iron or steel, which are supplied surfacetreated.
GH Form has created these products in collaborations with Henning Larsen Architects, Knud Holscher Design, Arkitema, Nanna Ditzel, Vilhelm Lauritzen A/S, Erik Brandt Dam, Jørgen Klinkby, Rud Thygesen, Frode Steinicke, Gorm Harkjær, Steen Bisgaard Jensen, Peter Becht, Karres + Brands, Polyform Arkitekter and 1:1 Landskab.
The product range features a wide range of solid materials such as cast iron, steel and FSC ® -certified timber. The benches are anchored in castings below ground or can be placed directly on paving, depending on the nature of the surroundings.
Cast iron products are robust and have a long service life. They retain their functionality for many years. Cast iron is a material that has been part of urban spaces for centuries.
The Copenhagen bench is most frequently chosen for public squares, parks, harbours and near listed buildings.
The bench is shown here with the wood bolted to the side panel and with table.
GH FORM
The Copenhagen Bench was first designed in 1888 and is still produced by GH Form. This is the original version where the wooden planks for the seat and back are slotted into the cast end sections. The rounded edges of the timber and the curved shapes of the backrest and front plank combine to ensure high seating comfort.
The Copenhagen Bench is produced in three different versions with the following features:
• With planks slotted into the end sections of the bench (original version)
• With two back sections slotted into the end sections
• With wood bolted to flanges moulded into the end section to facilitate the process of replacing a seat plank without the need to remove the end sections.
The quality and durability of all three versions is the same. They just cover different requirements. The end sections are made of cast iron. The timber used on the seat and back is FSC ® -certified mahogany. All benches are assembled with stainless steel screws and bolts. The bench is secured to solid ground or using a cast foundation. Bench seat height is 46 cm.
GH101001 Copenhagen Bench
GH101002 Copenhagen Bench
GH101003 Copenhagen Bench
GH101004 Copenhagen Bench
GH101005 Copenhagen Bench / two back pieces
GH101006 Copenhagen Bench / two back pieces
GH101007 Copenhagen Bench / two back pieces
GH101010 Copenhagen Bench / two back pieces
Wooden parts oiled / slotted into end section
Wooden parts oiled / bolted to end section
Wooden parts painted / slotted into end section
Wooden parts painted / bolted to end section
Wooden parts oiled / slotted into end section
Wooden parts oiled / bolted to end section
Wooden parts painted / slotted into end section
Wooden parts painted / bolted to end section
A new urban space has been created on the edge of Bispebjerg Cemetery in Copenhagen. The project is a collaboration between VEGA Landskab and Lightscapes. The Copenhagen Round Benches are placed along the beautiful cemetery walls.
GH FORM
The Copenhagen Round Bench is a supplement to the Copenhagen Bench. Round benches are most often used in public squares, parks, harbour areas, near listed buildings and along path systems with open spaces. The Round Bench comes in variants with either inward or outward curvature. When, for example, the bench curves outwards around a tree, the distance to other people seems further, which leads to the bench being used more often. When bench sections are arranged to form an inward curve along a curved wall, shrub, path or other object, all visitors to the bench can make eye contact, which makes the bench more socially inviting. Outward and inward curved sections can be freely combined to create the desired curved paths. The bench is available with armrests in the number and position you require.
The standard variant of our Round Bench has an internal open diameter of 1800 mm and an outer diameter of 3000 mm. The back of the bench is made of steam curved wood that is bent into individual radii according to the requirements of the specific project.
The bench is available with either one or two back sections. The end sections are made of cast iron. The two pieces of wood that comprise the seat are bolted to the bench ends with board bolts. The back is screwed on from the rear. All wooden parts and end sections are assembled with stainless steel bolts. The bench is anchored to solid ground or bolted to a foundation. Bench seat height is 46 cm.
GH101011
GH101012
GH101015
GH101016
The quality and durability of the children's bench is identical to that of the Classic Copenhagen Bench and uses the same FSC®-certified mahogany and cast iron end section construction.
GH FORM
The Copenhagen Children's Bench is designed on the same basis as the original 1888 version of the Copenhagen Bench. The timber sections used for the seat and back are slotted into the end sections. The bench can be used in locations such as parks, libraries, public institutions, schools and outdoor theatres which are often frequented by children. It is also great for theatres that simply need to introduce child seating in front of the stage. The bench is just as comfortable as the original. This comfort comes from the curvature of the backrest and front seat and the rounded edges of the timber. Bench seat height is 32 cm.
The design of the Copenhagen Chair is based on the original 1888 version of the Copenhagen Bench. The chair is a narrower version of the original bench, with the two wooden seat and back sections slotted into the cast end sections. The chair offers the same comfortable seating as the original bench. This comfort comes from the curvature of the backrest and front seat and the rounded edges of the timber. Seat height is 46 cm.
Quality and durability are identical to that of the Copenhagen Bench. The chair uses the same cast iron end sections and FSC ® -certified mahogany timbers. The ends are held together structurally by the timber sections and by a shaft that runs along the length of the chair under the seat.
GH FORM
The Aarhus Bench is one of Denmark's best selling benches for urban spaces, with high seating comfort and a classic and simple expression. The bench ends and armrests are made of galvanised steel, while the wooden slats are FSC ® certified mahogany. The bench can be bolted to the pavement or mounted with ground spikes or foundation.
We have chosen to offer a package solution for the Aarhus Bench, which is one of our most popular benches. Purchase of a set of five benches. The materials are delivered on a single pallet to reduce transport costs and storage space. Bench seat height is 45 cm.
Den A.P. Møllerske Støttefond, architect
Erik Brandt Dam and landscape architect
Charlotte Skibsted were behind the "Healing Gardens” project at Bispebjerg Hospital.
ERIK BRANDT DAM ARKITEKTER & CHARLOTTE SKIBSTED LANDSKABSARKITEKTER
The Bispebjerg Bench was designed for Bispebjerg Hospital's listed park gardens. The bench is compliant with all accessibility guidelines and is suitable for the elderly. It is made of FSC ® -certified timber and is available in oiled wood or painted.
All wooden components are solid and the seat is supported along its entire length to prevent sagging. The bench can be mounted on an anchor point that is attached to the bench before being cast in moist concrete. Bench seat height is 41 cm.
EBD101077 Bispebjerg Bench
EBD101076 Bispebjerg Bench
Painted wood
Oiled mahogany
The iconic appearance of our City Bench is based on the ideas of Nanna Ditzel, according to whom "the bench was conceived as an enclosed space in the public space that is intended to serve as a framework for the people who choose to sit on it."
The City Bench was developed in 1997. This bench features a high backrest that supports the back for the entire height of the backrest. This bench provides great seating comfort and accessibility thanks to its armrests and relatively high seat height. The bench is a cast iron and timber construction. The threedimensional “fan” shape of the bench sides perfectly utilises the properties of cast iron. This bench is available in two and threeperson variants.
The bench features two end sections, four supports, back and seat. The end sections and supports are made of cast iron. The supports are bolted into the end sections. Specially manufactured wooden slats are longitudinally mounted across the length of the seat and backrest. The slats are available in oiled or lacquered finishes. The wooden pieces are individually replaceable. Replacement does not require the bench to be uprooted from its anchor points. The bench can be freestanding or fitted with special anchors for casting into foundations. Bench seat height is 46 cm.
ND101001 City Bench for 2 persons
City Bench for 2 persons
ND101011 City Bench for 3 persons
and back in painted wood
The Dan Turèll Bench was designed as part of the art installation at Dan Turèlls Plads in Gentofte near Copenhagen.
1:1 LANDSCAPE
With its high back, deep seat and rounded shapes, the Dan Turèll Bench is a bench that invites you to sit on it. The wide body support of the bench makes for a comfortable sitting position. The bench is available in both straight lengths and curved arcs. It can also be assembled in any desired geometry and length.
The end sections of this bench are made of cast iron. The back and seat are made of wood. The Dan Turèll Bench is a painted cast iron construction, with all the wooden slats bolted to each end section with board bolts. This makes for a strong structure while also easing the process of replacing individual wooden parts. The wooden slats of the bench are mounted in halfjoints on the straight sections. The bench end sections can be delivered painted according to project requirements. The wooden components are available in either painted or oiled finishes. The bench can be set up to stand freely on the ground or bolted to an anchor point. Bench seat height is 44 cm.
KAS101080 Dan Turèll Bench
KAS101081 Dan Turèll Bench, curved section
KAS101082 Dan Turèll Bench
KAS101083 Dan Turèll Bench, curved section
Untreated cast iron, wooden parts oiled
Untreated cast iron, wooden parts oiled
Cast iron, wooden parts painted
Cast iron, wooden parts painted
The DockLine Plinth is a simple and robust design to withstand the workload of an urban space. The plinth can be ordered with both armrests and backrest. These can be retrofitted should the need arise at some point in the future.
The plinth is usually produced in a 2.4 metre length. It can be supplied in shorter lengths on request. The plinth consists of two cast iron end sections, with exposed timber along the length of the bench. The three wooden component parts are solid wood and are onepiece constructions. The wood is overlaid with neoprene between the cast iron and wood, ensuring that the joints are durable, while allowing the wood and screws to work freely as the weather changes. The plinth can be placed directly on paving or secured to foundations below ground level. Bench seat height is 46 cm or can vary depending on how it is anchored.
The curved shape and deep seat of our Lazy Days Bench makes it a bench that is perfect for just sitting down to relax. The wide body support offered by this bench provides a comfortable sitting position. It is produced in variants with or without armrests. The bench comes with a builtin table made of treated steel. The bench is also available with a footrest made of the same materials. Lazy Days also comes in a curved variant so the bench can flow.
The seat and backrest used for the Lazy Days Bench are made of FSC ® -certified mahogany. The loadbearing elements are a hot galvanised steel structure. Each wooden section is bolted to each bench end with board bolts. This ensures a strong structure and simplifies the process of replacing individual planks. The wooden parts used in the long benches are mounted in half joints. The bench ends can be delivered in the colours you need for your project. The wood can be painted or left natural with an oiled finish. The bench can be set up to stand freely on the ground or bolted to an anchor point. Bench seat height is 41 cm.
GH101051 Lazy Days
GH101052 Lazy Days with armrests
GH101053 Lazy Days
Wooden parts oiled
Wooden parts oiled
Wooden parts painted
GH101054 Lazy Days with armrests Wooden parts painted
GH101058 Lazy Days curved section
GH101059 Lazy Days curved section
GH101055 Lazy Days Footrest
GH101057 Lazy Days Footrest
GH101056 Lazy Days Table
Wooden parts oiled
Wooden parts painted
Wooden parts oiled
Wooden parts painted
6 mm painted steel
The central position of the bench legs and the high front and back seat edges make this bench look as if it is “floating”.
LED lighting can be mounted on the underside of the seating surface to create a luminous glow on the ground below the bench. Bench seat height is 46 cm or can vary according to project requirements and how the bench is anchored.
KARRES + BRANDS AND POLYFORM ARKITEKTER
The Circular Bench makes for an extremely strong and robust feature of a public space. The deep seating surface and large circumference of the bench provides seating for many people at a time. The bench is available in two sizes: Ø4000 mm and Ø6000 mm. The circumference of both bench variants is sufficiently large that a bench can encircle one or more trees. The Circular Bench is available as a partial arc component or as a full circle.
The bench can also be produced to alternative dimensions according to your project requirements. The seating surface is made of FSC ®certified mahogany. The wooden components come in two widths (70 and 150 mm respectively) set in a pattern that follows the curvature of the bench. The front and rear edges are finished with a vertical, steambent piece of timber that measures 70 x 180 mm. The wooden parts are available with paint finishes and in the type of wood that suits your project. The loadbearing components of the bench (legs and profiles) are made of steel. The bench is anchored below ground level.
KBP101070 Circular Bench Ø4000 mm
KBP101071 Circular Bench Ø4000 mm
KBP101072 Circular Bench Ø6000 mm
KBP101073 Circular Bench Ø6000 mm
steel / oiled wooden seat
steel / painted wooden seat
steel / oiled wooden seat
steel / painted wooden seat
All benches can be supplied with Wi-Fi as an access point, a power outlet in the base, lighting under the bench and a tree cavity in the seating surface.
The Scenaria Round Bench is a sturdy piece of furniture that is designed to withstand the workload that is par for the course when used in urban spaces. The bench is designed to have many functions; bench, lamp and tree grate while also being able to serve as a small stage if you want to get the attention of a small crowd. There are LED lights all around the base of the bench. The circular hole in the seating surface is designed for trees and can be produced in different sizes and positions according to project requirements.
The seating surface of the bench consists of solid wood planks with an oiled finish. The loadbearing structure is made of hotdip galvanised steel. The standard variant of the bench is designed for ground anchoring in concrete but can be manufactured with flanges than can be bolted into a surface instead. The bench comes with a painted base and can be supplied in a wood variety that suits your particular project. Seat height is 45 cm, depending on the project/casting.
SLA109090 Scenaria Round Bench
SLA109096 Scenaria Round Bench
Hotdip galvanized steel / oiled wood
Painted steel / Oiled wood
GH FORM
GH Form made the Platea Round Bench for Købkes Plads in Copenhagen’s Carlsberg District. The bench is a sturdy piece of furniture that is designed to withstand the workload that is par for the course when used in urban spaces. The bench is made to order by radius, either as complete circles or by arc measurements/degrees. The backrest is produced in the desired arc size. The backrest can be positioned independently of the bench seat and seat sections.
The bench is manufactured in hotdip galvanised steel. The wood is cut at an angle according to project requirements (see photos). The bench comes with a painted base and can be supplied in a wood variety that suits your particular project. The front part of the bench has no visible bolt joints or screw heads. The stated inner diameter of the bench does not take the backrest into account. In general, the backrest occupies 12 cm towards the centre from the back of the seating surface. The standard variant of the bench is designed for ground anchoring in concrete but can be manufactured with flanges than can be bolted into a surface instead. Seat height is 45 cm, depending on the project/casting.
GH101071 Platea Round Bench, Ø3400 / 2400 mm Galvanised / painted steel
GH101072 Platea Round Bench, arch 180°, Ø4800 / 3800 mm Galvanised / painted steel
GH101073 Backrest, L1200 mm, arc radii Galvanised / painted steel
GH101074 Mitre cut timber Oiled
PLATEA ROUND BENCH
The Platea Round Bench with Planter has a standard Ø2200 dimension. The round bench can also be made as a special order to the radius of your choice. The bench and planter are made of treated steel and painted in your chosen RAL colour. The bench is supplied in FSC ®certified mahogany. The mahogany is oiled and mitre cut.
The standard variant of the bench is designed for ground anchoring in concrete but can be manufactured with flanges than can be bolted into a surface instead. Seat height is 45 cm, depending on the project/ casting.
The Mobilia Bench is part of the Mobilia series, which includes a table, a grill, a waste container, a urinal, straight and curved benches and an information board.
The bench can be used alone or in combination with the Mobilia Round Bench to create lines and curves in urban spaces. This allows the bench to become an integral part of the city space. Mobilia Bench 80 can be used both indoors and outdoors. The bench is sturdy and has proven its robustness after years of ordinary and tough use in public spaces. The bench has been used at high schools, institutions and other locations. A backrest and an armrest are available for Mobilia Bench 80. These can be retrofitted to already installed benches.
The standard variant of the bench is produced in two metre long modules, but can also be delivered in lengths to order. The 40 x 80 x 600 mm wooden slats are laid perpendicular to the length of the bench. The loadbearing structure consists of cast iron or steel legs. Neoprene spacers ensure air between the wood and the iron. They also give the timber the freedom to work in changing weather conditions. The Mobilia Bench 80 is secured to foundations below ground level, making it possible to lay paving stones and tiles all the way up to the end sections. The bench can be supplied with shortened legs for surface installation. There is also the option of securing the foundations into the ground before asphalt is laid, with the bench being installed afterwards. At the bottom of the bench legs, which is in the ground, is a relief surface for downward pressure. Seat height is 45 cm, depending on the project/casting.
EBD101061 Mobilia Bench 80
Treated steel with wooden seat
EBD101062 Mobilia Bench 80 Treated cast iron with wooden seat
EBD101063 Mobilia Wristband 80
EBD101064 Mobilia Backrest 80
Treated steel
Treated steel and wood
A complete Mobilia picnic set, consisting of a table with cast iron tabletop and two benches, mounted on concrete foundations, weighs approximately two tonnes, making it particularly suitable for applications that require a very robust product.
This Mobilia set has been installed at the park in Odense’s Vollsmose district.
Together with the Mobilia Bench, the table is intended for urban spaces, schools and institutions; Places that are used by large numbers of people, resulting in heavy wear and tear. It is produced with different tabletop options: two in wood and one in cast iron. These tabletops have proven their robustness in urban spaces over many years. A cast iron tabletop provides a strong and solid construction that will last for many years, even when used more than would often be considered reasonable. A wooden tabletop provides a natural appearance and a temperatureneutral surface. The Mobilia Table is also produced in a variant with a wooden tabletop with a steel plate embedded in the centre. The steel plate makes for a surface that is suitable for use under a disposable grill.
The Mobilia Table consists of two cast iron or steel end sections. The selected tabletop is supported with neoprene between the ribs and worktop, ensuring the durability of the joints as any wood and screws can work freely. As standard, the table is secured below ground level, allowing paving to be laid right up to the table leg. A foundation can also be secured before asphalt is laid, to which the table can be mounted afterwards. Below ground level, at the bottom of the table legs, is a relief surface for downward pressure. The table can also be supplied with shortened legs if it is to be placed on paving.
EBD107001 Mobilia Table Frame and table top in treated cast iron
EBD107002 Mobilia Table Frame in treated steel, Table top in wood with recessed steel plate
EBD107003 Mobilia Table Treated cast iron frame, wooden table top with recessed steel plate
EBD107004 Mobilia Table Treated cast iron frame, wooden table top
EBD107005 Mobilia Table Treated steel frame, wooden table top
The Mobilia Round Bench is available with backrest and armrest. The backrest and armrest can also be retrofitted to existing benches.
ERIK BRANDT DAM
The round bench is a curved bench module that can be combined according to project requirements, both in length and radius. The Mobilia Round Bench makes for an extremely strong and robust feature of a public space. The individual elements can be customised so that the assembled modules form circular or S shaped bench sequences. It offers wide geometric possibilities that make it possible to create different shapes.
The bench is produced as standard in two metre long modules and radius according to the project. The curved bench comes with wooden parts measuring 40 x 80 x 600 mm laid out radially. For diameters under 4 metres measured on the outside of the bench, wooden parts are cut at an angle after curvature. The bench legs are produced in steel or cast iron. The wood is covered with neoprene, which provides a cushioning effect that ensures wood and screws can work freely in changing weather conditions. The bench is normally secured in castings below ground level. Seat height is 45 cm, depending on the project/casting. The bench is available with shortened bench legs and can be set up directly on the ground.
EBD101065 Mobilia Round Bench Treated steel with wooden seat
EBD101066 Mobilia Round Bench Treated cast iron with wooden seat
The seat can be used on different types of surfaces and materials both indoors and outdoors. It can therefore be installed regardless of whether the surface is angular or has large level variations. The seat is available with granite block, steel legs or wall brackets.
The seat has many applications. It is specially designed for use on the quayside with a low height that does not obstruct the view of the water. The seat can be used on its own or together as a stepped seating option, on a quayside or on the edge of a planting bed.
The seat consists of wooden slats mounted on a steel frame. The wood used on the seat is FSC ® -certified mahogany. On the underside of the seat's steel frame, there are four rubber mounts that allow the seat to be levelled independently of the ground surface. The rubber suspension also has a cushioning effect that increases seating comfort. The rubber mounts can be attached to a foundation suitable for a given project or to the standard solutions mentioned above. Seat height depends on project/foundation.
HLA101001 Seat with frame
Oiled mahogany and steel
HLA101002 Seat with legs Oiled mahogany and steel
HLA101005 Seat with concrete legs Oiled mahogany and coloured concrete
HLA101003 Seat with steel hooks for wall mounting Oiled mahogany and steel
HLA101004 Seat on granite plinth
Oiled mahogany and granite
THOMAS E. ALKEN MDD/ FORMAT DESIGN
The Pocket Park series is made from 100% recycled wood collected during renovation work on our Copenhagen Benches. The dimensions of these pieces of wood served as the point of departure for how we designed our Pocket Park range. They can be delivered with raw sanded wood or sanded and painted in your chosen colour.
The series is created to divide the day into three phases: the morning when the elderly and parents on maternity leave use the city, afternoons when city dwellers come home and evenings when the city's younger denizens gather outside to hang out.
Pocket Park chair comes in three variants.
• Pocket Park Solo
• Pocket Park Easy
• Pocket Park Family
The chair is available with a swivel base.
TEA101013 Pocket Park / Solo
TEA101015 Pocket Park / Easy
TEA101014 Pocket Park / Family
Treated cast iron, width 710 mm
Treated cast iron, width 710 mm
Treated cast iron, width 1180 mm
You
GH Form developed the Umeå Bench series in collaboration with architect Peter Becht.
ARCHITECT PETER BECHT, MAA MDL MSA
The Umeå Bench series includes our Rest Bench, Angle Bench, Back Bench and Kissing Bench. The benches are heavyduty items of furniture that have been designed for installation in urban spaces. The different models offer variety, both in use and visually. The benches are available in various lengths and configurations.
The bench is made in FSC ® -certified mahogany and can be supplied in painted or oiled finishes. It can be made using alternative wood varieties if you so prefer. The 125 x 45 mm wooden planks run lengthwise for the Rest Bench and Angle Bench and crosswise on the Back Bench and Kissing Bench. The legs are painted 40 x 40 mm RHS profiles. Neoprene spacer blocks ensure the presence of air between the wood and the metal frame and also provide a shockabsorbing effect, which gives the wood the freedom to work in changing weather conditions. The bench is cast into foundations underground. We offer a wide range of foundation options for projects where excavation is not possible. All benches can be supplied with WiFi as an access point, power outlets on the side or base and with underseat lighting. Seat height is 40 cm, depending on the project.
PB101011
PB101013
PB101014
KRAGH & BERGLUND LANDSCAPE ARCHITECTS
The Block Bench is intended to be used as an element that can stand in isolation as an independent feature of a space. It can be set up in large indoor spaces or as an outdoor piece of furniture.
The Block Bench can be mounted in most places where there is an edge. We can supply a granite or concrete plinth to match the bench setup. The wide backrest used on this bench can create a sense of calm and space.
The Block Bench comes in a standard length of 1800 mm, but can be customised to specific projects. The timber components of the bench come as standard in FSC ® -certified mahogany but can also be supplied in heattreated pine. The 50 x 32 mm wooden sections are mounted on a onepiece galvanised flat steel 50 x 10 mm construction. The wooden parts are mounted from the rear with countersunk rust and acidresistant wood screws. The seat is bolted to the concrete element with glued anchors in predrilled holes. Neoprene spacers ensure air between steel and plinth while providing a shock absorbing effect between screws and wood, allowing them to work freely in changing weather conditions. Bench seat height is 46 cm or can vary by project.
JØRGEN KLINKBY
The JK18 Bench is produced with cast iron end sections. It is suitable for both urban spaces and parks. The JK18 Bench is made in two variants: one for installation atop paving and another for wall installation.
The bench has a wooden seat and back. The upper backboard and front seat board have a 25 mm rounding radius on the edge to increase seating comfort. The bench can be placed on the ground, secured to a buried foundation or mounted on a wall. The JK18 Bench has a seat height of 43 cm. The JK18 Bench for wall mounting can be installed at a seat height to suit the needs of your project.
JK101022 JK18 Bench
The bench is designed for very comfortable seating while ensuring extra accessibility for people with knee and hip problems.
The height, angles, deep armrests and back support of our Nordic Bench make it compliant with Sweden’s accessibility guidelines. The bench is available with and without armrests. These can be retrofitted should the need arise at some point in the future.
Nordic Bench characteristics
• Danish design
• Swedish standards
• Norwegian wood
The bench uses cast iron for its end sections. Scandinavian heattreated wood is used for the seat and backrest. The wood can be changed to suit the requirements of the specific project. The wooden parts can be replaced separately without the need to remove the bench from its anchors. The bench is available in variants for concrete casting or for installation onto paving / foundations. All versions of the Nordic Bench can also be manufactured with narrow slats instead of wider planks. Bench seat height is 46 cm or can vary depending on how it is anchored.
KH101013 Nordic Bench
Treated cast iron / Oiled wood
KH101002 Nordic Bench with narrow slats Treated cast iron / Oiled wood
KH101011 Nordic Bench for casting in concrete Treated cast iron / Oiled wood
KH101012 Nordic Bench with narrow slats for casting in concrete Treated cast iron / Oiled wood
KH101051 Right armrest
KH101052 Left armrest
Treated steel
Treated steel
DESIGNED BY THOMAS E. ALKEN MDD/ FORM DESIGN
GH Form har i samarbejde med Thomas E. Alken, udviklet en ny bænk Avenue, bænken er designet til at skabe et mere intimt rum for dem som sidder på den. Bænkens ramme er fremstillet af stål og det omkringsiddende skørt og sideflader er lavet af træ efter projekt.
GH Form har i samarbejde med Thomas E. Alken, udviklet en ny
bænk Avenue, bænken er designet til at skabe et mere intimt rum for dem som sidder på den. Bænkens ramme er fremstillet af stål og det omkringsiddende skørt og sideflader er lavet af træ efter projekt.
The Avenue Bench was designed by Tomas E. Alken MDd/ Form Design as an item of furniture that can embrace and create a space for its users.
The Avenue Bench is made of FSC ® -certified mahogany and heattreated pine and can be painted in the colour of your choice. The bench can be cast in place, mounted on a foundation or placed directly on the paving. Bench seat height is 45 cm.
STEEN BISGAARD JENSEN
The Clips Bench is available in single or doublesided variants, with or without backrest. It can be set up in large indoor spaces or as an outdoor piece of furniture. The Clips Bench is intended to be used as an element that can stand in isolation as an independent feature of a space. The single variant of the bench can be installed in most places where there is an edge. With its wide double backrest, this bench can bring peace and calm on both sides.
The Clips Bench comes in standard lengths of 600 and 2000 mm and can be customised for specific projects. The Clips Bench with backrest is made of a bent steel profile and has a slightly springy effect. The standard wooden slats are made of FSC ® -certified mahogany and follow the edge to which the bench is installed, which provides a gently rounded profile. To mount the Clips Bench, drill holes according to a template. The bench can then be secured to the ground with bolts.
GH Form can supply a granite or concrete plinth suitable for setting up the bench with predrilled holes for assembly. Bench seat height is 46 cm or can vary depending on project requirements.
SB101061 Clips
SB101062 Clips Bench
SB101063 Clips
SB101064 Clips
SB101065 Clips
SB101066 Clips
with backrest 600 mm
with backrest 2000 mm
parts oiled
parts oiled
parts oiled
parts oiled
Cast iron can be surface treated. Find out more about this surface treatment. Untreated cast iron is a material familiar in streetscapes in the form of paving elements such as manhole covers and grates. The quality castings used for our benches provide the same characteristics in terms of both strength properties and patinas.
Steel must be surface treated. If it is not, the corrosion process will work its way into the product and cause fracturing over time. GH Form supplies a range of different surface treatments. See the section below on surface treatment.
Corten is a corrosion and weatherresistant grade of steel. When Corten steel is exposed to wind and weather, it forms a rust layer on the surface relatively quickly. This layer of rust is what makes it so hardwearing. Corten steel therefore requires no surface treatment. The beautiful red colour transforms gradually over the years and therefore products can change colour as time goes by.
Rustresistant steel products are built to A4 grade, which makes them acidresistant and very durable. The surface has a high degree of uniformity but small variations may occur. This will become less noticeable after a short period of wear and tear and will eventually disappear altogether.
Our chosen wood is generally FSC ® -certified mahogany Products can be supplied with alternative wood species such as pine, oak, ash; all with certificates upon request. GH Form collaborates with subcontractors who research and develop heat treatment methods for Nordic wood species. Such woods patinate to a silver grey colour after years of use, depending on the installation location. All wood species used are suitable for surface treatment if the wood is to be painted in a single colour. Our natural finish wood products come with a wood oil treatment.
GH Form works with different surface treatments: oiling, hot dip galvanisation, metallisation, powder coating and wet painting.
For our oil treatment, we use an environmentallyfriendly oil with added pigment, which is applied to the cast iron. The oil takes four days to harden.
GH Form works with colour systems such as RAL and NCS (Nordic Color System). All products are painted in colour and corrosion class according to order. GH Form processes products to at least corrosion class 4.
GH Form offers a wide range of foundation options. This makes it possible to find the right type of foundation to suit any type of project. The various different foundation options are listed below. We also list foundation types that can be used where underground installation is not possible. The most common foundation type is a cast concrete foundation as illustrated in the line drawing below. The various foundation options further depend on the chosen product and its associated installation requirements:
• For installation directly on the ground / pavement
• Bolts to a foundation
• Foundation below ground level
• Excavated foundation
• Embedded in foundation
• Wallmounted
• Bolts for load-bearing structures / floors
• Bolts for use in granite block
• Bolts for use in concrete block
• Ground spike
GH Form ensures that detailed installation, maintenance and safety instructions are included with the delivered product upon delivery.
It is important that wooden furniture is properly maintained and cared for if it is to be longlasting and retain an attractive surface. When treating furniture, we recommend that you first treat a small area that is not visible. Once you are able to determine that the treatment has no adverse effects, you can then treat the rest of the furniture.
Wood is a living material that changes throughout the life of the furniture. The colours and textures of the wood change depending on the amount of sunlight to which it is exposed. You should therefore not place vases, lamps and the like on the furniture during the first few months as these will leave visible stains. The more sunlight the furniture is exposed to, the faster this process goes. It is also a good idea to keep the furniture clean to prevent dirt and leaves from leaving rub marks on the furniture. All furniture can be washed with a cloth and mild soap and water. Small particles of 'loose wood' on the surface provide a breeding ground for algae and mould. We therefore recommend that the wood is brushed once a year with a stiff brush to remove any small particles of loose wood on the surface.
The purpose of maintenance is to preserve:
• a beautiful appearance
• durability
• weather resistance
• low susceptibility to dirt
• good cleaning options
• water repellency
• protection against mould
• simple and safe repair option
Maintenance also allows you to change the colour of the woodwork.
Oiled wood is fairly resistant to dust and water. Oiling also makes small scratches and marks harder to see. The oil penetrates the wood and creates a surface that is smooth to the touch.
Oiled wood surfaces should be maintained approximately a couple of times a year by applying a thin layer of new oil. Maintenance should only be carried out when the wood appears dry on the surface, or if it is faded or stained. We recommend that you only apply new oil when the surface
requires it. Applying new oil once or twice a year is usually enough to maintain the colour and glow of the wood. Before applying oil, wash the entire piece of furniture with a soft cloth wrung out in lukewarm water. If the wood grain starts to rise, the surface can be gently sanded with 120 grit sandpaper. The wood should then be wiped with a clean, dry cloth, after which a light layer of oil should be evenly applied to the entire surface of the wood. Finally, wipe the surface with a clean, dry cloth along the length of the wood structure and allow the furniture to dry.
Cloths soaked in oil can spontaneously combust and should be disposed of with care. We recommend that cloths that have been soaked in oil are stored in a closed plastic or metal container with a little water added.
We use full coverage paint that leaves only the wood structure visible. Paint has the advantage of requiring less frequent wood maintenance. Maintenance should be expected every 4 8 years, depending on how exposed the wood surface is to the elements.
When maintaining painted surfaces, clean the wood first. Drops of primer oil should be added to any parts of the cleaned surface that reveal bare wood. Dab on acrylic alkyd or plastic alkyd paint in the same places. Then fill any gaps and cracks with acrylic putty or acrylic sealant for outdoor use. Then add two coats of paint. The first coat of paint must be completely dry before adding the second coat.
We have a vision of safe and green urban spaces, focusing on quality, design and sustainability. We are a familyowned company from Denmark that started out in the town of Holbæk on Zealand, which was our first iron casting facility. We now have our own factory in Borup (also on Zealand) where we manufacture all our products for urban spaces.
Sustainability is a shared responsibility, so GH Form spends every day trying to make our urban environment greener. Our cast iron products are all made at our own iron casting facility on Zealand. We only use 100% recycled iron to make our products.
Productspecific EPD certifications are our way of helping our customers by providing them with appropriate environmental documentation. Our EPD certifications can be looked up in the database of EPD Denmark epddanmark.dk.
The GH Form range of furniture for urban spaces has been developed in close collaboration with various architects. Our extensive range of products is made of solid materials like cast iron, steel and wood. Cast iron products are tough and have a long service life. The material has been a feature of urban spaces for centuries.
Do you need our advice?
Contact us by phone on (+45) 59 44 09 90 or by email at mail@ghform.dk
AQUAFORM RAINWATER DRAINAGE
BENCHES FOR URBAN SPACES
BENCHES, ROUND BENCHES, PICNIC SETS
FLORAFORM
TREE GRATES AND PLANTERS
PICTOFORM
TACTILE GUIDED PATHWAYS FOR THE SIGHT-IMPAIRED
LIGHT IN URBAN SPACES ILLUMINATION
FACADE AND ROOF WINDOWS HISTORICAL CASTINGS
Carlsberg District, Copenhagen Christiansbro, Copenhagen
Dan Turrélls Plads, Copenhagen
The Healing Gardens, Bispebjerg Hospital
Fisketorvet Shopping Centre, Copenhagen Frederiksberg, Copenhagen
Hedehusene Stationsplads
Herning City Centre
Hørsholm Pedestrian Street
Karens Minde Cultural Centre
Kastrup Airport, Copenhagen
Kongens Nytorv, Copenhagen
Købmagergade & Hauserplads
Køge Stationsplads
Malmö, Sweden
Nakskov Town Centre
Nordhavn Docklands, Copenhagen Nyborg Square
Rosenhaven, Odense City Centre
Roskilde Harbour
Copenhagen City Hall Square
Sluseholmen, Copenhagen
Stænder Torvet, Roskilde
Søborg Hovedgade
Tivoli Gardens, Copenhagen
Umeå, Sweden
Vollsmose, Odense
GH FORM A/S
BÆKGÅRDSVEJ 64
DK 4140 BORUP
T +45 59 44 09 90
MAIL@GHFORM.DK
GHFORM.COM