Compressed Gases Equipment 2022 EDITION
Solutions
LPG SOLUTIONS
COMPRESSED GASES SOLUTIONS
NATURAL GAS SOLUTIONS
ALTERNATIVE FUEL SYSTEMS
GAS METERING SOLUTIONS
IoT
IoT
IoT
INDUSTRIAL PROCESS MANAGEMENT
IoT
TABLE OF CONTENTS HIGH PRESSURE CYLINDER VALVES
7
REFRIGERANT GASES VALVES
44
CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type
8
Single Phase Diaphragm valve for inert Refrigerant gas
46
CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders
9
Double Port Diaphragm valve for inert Refrigerant gas
48
CBH/CBI series New Handwheel O-ring Seal B and MC Acetylene Cylinder Valves
10
Y valve for inert Refrigerant gas
49
CBB/CBC series Wrench Operated Acetylene Valves
11
Valve for inert Refrigerant gas
50
CBA series Brass High Pressure Cylinder Valve for Industrial Gases O-Ring seal type
12 Table of outlet connections for the most significant gases
51
Pressure Relief Device Selection Guide
15
P 2009 series Residual Pressure Valve for Industrial gases
16
P 2009-R series Residual Pressure Valve for Industrial gases
17
Filling Adapters for Residual Pressure valves
19
IVIPR series Valve with Integrated Pressure Regulator for Oxygen
20
IVIPR series Valve with Integrated Pressure Regulator for Ar / CO2 Mix and Inert Gases Mix
21
IVIPR series Valve with Integrated Pressure Regulator for Acetylene
22
IVIPR series Adapters & Shrouds
23
NOS series Chromium Plated Brass High Pressure Cylinder Valves for Nitrogen Dioxide
24
CORROSIVE, PURE AND ULTRAPURE GASES
25
DIASPEC B200 series Brass High Pressure Diaphragm Seal Valve for High Purity Gases
26
DIASPEC S200 series Stainless Steel High Pressure Diaphragm Seal Valve for High Purity Gases
27
DIASPEC TD S200 series Stainless Steel High Pressure Tied Diaphragm Seal Valve for High Purity Gases
28
MEDICAL EQUIPMENT
29
CDA series Chromium Plated Brass High Pressure Cylinder Valves for Medical Gases O-Ring seal type
30
P 2009 series Residual Pressure Valve for Medical gases
33
P 2009-R series Residual Pressure Valve for Medical gases
34
PDE series Post Medical Cylinder Valves Pin Index System O-Ring seal type
35
PDE series Post Medical Cylinder Valves Pin Index System O-Ring seal type - MRI Conditional
37
VIPROXY 1 Touch series Valve with Integrated Pressure Reducer for medical Oxygen
39
AirVIPR Valve with Integrated Pressure Reducer for Air
41
VIPROXY 1Touch NEOS Valve with Integrated Pressure Reducer for medical Oxygen
42
VIPROXY 1 Touch series Adapters
43
cavagnana.com
3
Quality Management and Quality Assurance Conforming to standard ISO 9001 Omeca and Pergola are UNI EN ISO 9001 certified. This standard has been achieved through the collective efforts of our customers, who have made it possible for us to obtain the goal of “TOTAL QUALITY”. Through our efforts and research we guarantee that Cavagna Group will provide the highest standard of service to ensure success. Today you can be assured that with Cavagna Group you will have a partner in quality and excellence.
International Standards Many products of the Group carry the approval of National and International Organizations. For example:
BELGIUM
CGA
CHLORINE INSTITUTE
CZECH REBUBLIC
FRANCE
GERMANY
GERMANY
POLAND
POLAND
ROMANIA
USA
Please be so kind to verify with us approvals, accessories (tubes, tubes Material components, tubes fixing, anti-filling devices, tools for anti-filling devices, caps, sealants and settings) and optional features. Approvals of any kind have to be expressly specified on orders or enquires. For orders please refer to:
50 Napoleon Court Somerset, NJ 08873 732-469-2100 • Fax 732-469-3344 info@cavagnana.com - cavagnana.com 4
cavagnana.com
Wherever gas is used, we are there Since 1949 the Cavagna Group has been a premier manufacturer of cylinder valves and related equipment. Recognized around the world, Cavagna meets or exceeds the highest industry and regional standards for quality. It was founded in 1949 with headquarters in Northern Italy, close to Brescia, which is historically renowned for its metal processing industry. Years of experience and devotion to highly automated and controlled production facilities enabled the group to move into many new market segments through its own research and development activities coupled with several key acquisitions. Today we offer our customers a complete solution for their gas handling needs. Our product offering includes LP gas valves, ASME, fork lift and motor fuel tank valves, medium and high pressure cylinder valves for industrial, medical and specialty gases and a range of high and low pressure LP and natural gas regulators. Cavagna is recognized by over 40 national and international standards agencies, including such Canadian and U.S. organizations as the AGA, ASME, CGA, IAS and UL. Most recently Cavagna has secured its approval by the European notified body Apragaz for its High Pressure Industrial and Specialty Gas and LP-Gas Cylinder valve line. The Group consists of nine vertically integrated production companies in Italy and seven others spread across the five continents. The Cavagna Group now sells in more than 145 countries worldwide through a distribution network consisting of fifteen fully owned additional distribution companies. It boasts good business relations with major oil/gas companies, industrial gas companies, automotive OEMs, compressed and liquefied gas container manufacturers and gas
appliance OEMs. Our North American Distribution Center was opened in 1997, located in Somerset New Jersey provides our customers with immediate on time shipments from our extensive inventories. This 25,000 square feet facility including a grey room light assembly area where the Group refurbishes and certifies its VIPROXY products for the medical market. The group’s commitment to local inventory has allowed our sales to both our Canadian and U.S. clients grow as they provide 24 hour order processing. Our commitment to customer service is paramount to our corporate philosophy of “Think Globally and Act Locally”. We are an dynamic company with a superb safety record. Our various market interests have allowed us to develop a product line unparalleled in our industry. Growth and service go hand in hand with Cavagna’s commitment to total quality. It is this commitment that drove the group’s achievement of ISO certification in the early 1990s. To further our goal in the area of quality and to significantly move ahead of our competition, Cavagna has recently embarked on a six-sigma program to pursue a higher level of overall corporated quality. This program is being supported by our top management and will involve every face of our firm’s resources. Quality and capabilities have certainly paid us dividends over the years. The objective of our R & D group, our quality department and our engineering group are obtained because of Cavagna’s corporate philosophy which bases its milestones on the quality of the human resources employed to guarantee the safety and reliability of its products world wide. We look forward to the privilege to serve your needs in the future. cavagnana.com
5
Valve Numbering Sequence Guide Part Number
C
B
A
1
540_
1 3360 B
1
Type
C
Industrial
Blanck
P
Pin Index
B
Valve Bagged for Medical Oxygen Service
M
MR 3-T Conditional (Suitable for Use in
2
Body Material
B
Brass
C
Chrome Plated Brass
D
Chrome Plated Brass except inlet
S
Stainless Steel AISI 303
T
Stainless Steel AISI 316
8
7 xxxx
6
3
Valve Model
A
Standard
B
B Acetylene Valve
C
MC Acetylene Valve
D
Diaspec Diaphragm Valve
E
Pin Index Wrench Operated
Optional Valve Not Bagged
MRI Applications)
Pressure Setting PRD Requirement, example: 3,000 3,360 3,775 4,000 Etc. PSI
6
Safety Type
0
Without Safety
1
Safety Disc
3
212^ Fuse Metal
5
165^ Fuse Metal With Safety Disc
6
212^ Fuse Metal With Safety Disc
F
Pin Index Toggle Operated
G
Standard Valve With Black Lexan Handwheel
H
B Acetylene Valve With Handwheel
I
MC Acetylene Valve With Handwheel
O
90° Acetylene Valve
V
Residual Pressure Valve
4
Inlet Thread Size
5
CGA Standard
1
3/4” NGT
xxx
=CGA Designation, example:
3
.750-16UF2A
5
3/8” NGT
xxxR
=CGA-R, example:
6
1” NGT
7
3/4” NGT 7 O.S.
8
1/2” NGT
9
1.125”-12UF2A
G
25E www.cavagnagroup.com
320 540 580 870 320R 540R 580R
High Pressure Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type
8
CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders
9
CBH/CBI series New Handwheel O-ring Seal B and MC Acetylene Cylinder Valves
10
CBB/CBC series Wrench Operated Acetylene Valves
11
CBA series Brass High Pressure Cylinder Valve for Industrial Gases O-Ring seal type
12
Pressure Relief Device Selection Guide
15
P 2009 series Residual Pressure Valve for Industrial gases
16
P 2009-R series Residual Pressure Valve for Industrial gases
17
Filling Adapters for Residual Pressure valves
19
IVIPR series Valve with Integrated Pressure Regulator for Oxygen
20
IVIPR series Valve with Integrated Pressure Regulator for Ar / CO2 Mix and Inert Gases Mix
21
IVIPR series Valve with Integrated Pressure Regulator for Acetylene
22
IVIPR series Adapters & Shrouds
23
NOS series Chromium Plated Brass High Pressure Cylinder Valves for Nitrogen Dioxide
24
cavagnana.com
7
High Pressure Cylinder Valves
CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type
List Features
• O-Ring technology provides superior leak integrity • Easy operation and long service life • 100% leak test to 1.2 times service pressure • All markings are located on the valve neck to protect them from damage • Large orifice size provides faster vacuum and filling rates • Durable forged brass body manufactured by Cavagna Group • Unique seat holder design • Available configurations include: Inlet threads (NGT, DIN477, BS, EN, EN ISO)
List Technical data Pressure Maximum Service Pressure Test Pressure
500 PSI 885 PSI
Temperature - Storage
-60° F ÷ 149° F
Temperature - Operating
-50° F ÷ 149° F
Life Cycle
2,000 minimum
Torque Values for PBA Acetylene valves Max Operating torque @ 0 PSIG inlet pressure Max Operating torque @ 240 PSIG inlet pressure Max Operating torque @ 2,900 PSIG inlet pressure
8.8 lbs / inch 8.8 lbs / inch 17.7 lbs / inch
Max Overtorque
221 lbs / inch
Standard carton quantities: 25 each
0.47
Flow Capacity (CV)
0.137 inch
Orifice Ø:
Material components Valve Body Forged Brass EN12165 alloy Back up ring PTFE Handwheel Aluminium Seat PA 612-Zytel O-rings EPDM Antifriction ring Delrin Bonnet Brass alloy conforming EN12164
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard
Ordering Information
8
Part Number
Type
CGA Outlet
Outlet Thread Size
CBA 8 300 0
Commercial
300
.825”-14 NGO RH Ext.
Inlet Thread Size 1/2” NGT
CBA 1 300 0
Commercial
300
.825”-14 NGO RH Ext.
3/4”-14 NGT
CBA 6 300 0
Commercial
300
.825”-14 NGO RH Ext.
1”-11 1/2 NGT 3/4”-14 NGT
CBA 1 410 0
Canadian Style
410
.850”-14 NGO LH Int.
CBA 8 510 0
P.O.L.
510
.885”-14 NGO LH Int.
1/2” NGT
CBA 1 510 0
P.O.L.
510
.885”-14 NGO LH Int.
3/4”-14 NGT
CBA 6 510 0
P.O.L.
510
.885”-14 NGO LH Int.
1”-11 1/2 NGT
cavagnana.com
High Pressure Cylinder Valves
CBO
series Vertical Outlet Acetylene Valve with Handwheel For Collar Style Cylinders List Features
• Rugged brass forged body manufactured by Cavagna Group • O-Ring design provides industries best leak tightness and easy operation • Compact Handwheel provides better access to the valve Handwheel and eliminates interference with cylinder collar • Inlet screen prevents filler mass or felts from entering the valve • Easy to read valve markings are roll stamped on the valve neck - not on the wrench flats • Soft seat design provides positive shut off
List Technical data Pressure Maximum Service Pressure Test Pressure
500 PSI 885 PSI
Temperature - Storage
-60° F ÷ 149° F
Temperature - Operating
-50° F ÷ 149° F
Life Cycle
2,000 minimum
Torque Values for PBA Acetylene valves Max Operating torque @ 0 PSIG inlet pressure Max Operating torque @ 240 PSIG inlet pressure Max Operating torque @ 2,900 PSIG inlet pressure
8.8 lbs / inch 8.8 lbs / inch 17.7 lbs / inch
Max Overtorque
221 lbs / inch
Standard carton quantities: 25 each
n/a
Flow Capacity (CV)
0.137 inch
Orifice Ø:
Material components Valve Body Forged Brass EN121645 Handwheel Aluminium Bonnet Brass EN12164 Seat PA 612 Zytel 158 O-Rings EPDM Back up Ring PTFE Antifriction ring Delrin Filter Stainless Steel
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard
Ordering Information Part Number
Type
CGA Outlet
Outlet Thread Size
CBO 1 510 0
P.O.L.
510
.885”-14 NGO LH Int.
Inlet Thread Size 3/4” NGT
CBO 1 300 0
Commercial
300
.825”-14 NGO RH Ext.
3/4” NGT cavagnana.com
9
High Pressure Cylinder Valves
CBH/CBI
series New Handwheel O-ring Seal B and MC Acetylene Cylinder Valves List Features
• Handwheel design permits easy access to the valve stem and bonnet to perform leak checks in compliance with DOT requirements • Positive spindle nut seal with the valve body eliminates the need for constant tightening of packing nuts • Robust brass Handwheel prevents breakage and corrosion associated with aluminium versions • Self locking zinc coated steel nut affixes Handwheel to the Sturdy Brass Stem • Proven double O-Ring technology assures positive leak tight operation extending service life • Easy low torque operation eliminates the need for wrenches or keys • Soft seat extends service life and reduces leakage • Handwheel design eliminates costly valve repairs reducing overall “Cost of Ownership”
B
List Technical data Pressure Proof Test
1,465 PSI min 885 PSI
Temperature - Storage
-60° F ÷ 149° F
Temperature - Operating
-50° F ÷ 149° F
Life Cycle Torque Values for PBH/PBI Acetylene valves
2,000 minimum
Operating torque @ 500 PSIG
3 lbs/inch (CGA 520) 221 lbs / inch
Max Overtorque
(520) .133 inch
Orifice Ø:
MC
Material components
Valve Body Forged Brass EN12165 Handwheel Brass EN12164 Bonnet Nut Brass EN12164 Seat PA 612 Zytel 158 O-Rings EPDM Back up Ring PTFE Fusible plug 212° F Integral Fusible metal Strainer AISI 304 100 mesh
Standard carton quantities: B Acetylene Series: 40 MC Acetylene Series: 50
Conforms to all requirements of: CGA S-1.1 CGA V-1 CGAV9
Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections Standard for Gas Cylinder valves
Ordering Information
10
Part Number
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
CBH 5 520 3
Acetylene
520
.895-18 NGO RH Ext.
3/8-18 NGT
CBI 5 200 3
Acetylene
200
.625-20 NGO RH Ext.
3/8-18 NGT
cavagnana.com
High Pressure Cylinder Valves
CBB/CBC
series Wrench Operated Acetylene Valves
List Features
• Valve body made of rugged forged brass produced by Cavagna Group • Fusible metal pressure relief device • Large wrench flats for easy installation • Teflon packing and anti extrusion rings prevent packing leakage • Plated steel stem resists damage from wrenches and corrosion
B
List Technical data Pressure Proof Test
1,465 PSI min 885 PSI
Temperature - Storage
-60° F ÷ 149° F
Temperature - Operating
-50° F ÷ 149° F
Life Cycle
2,000 minimum
Torque Values for CBB/PBC Acetylene valves: See Ordering information below.
Material components Valve Body Pressure Relief Packing Nut Packing Packing Gland Packing Washer Stem Strainer
Forged Brass EN12165 alloy 212° F Integral Fusible Metal Brass EN12164 Teflon (PTFE) Brass EN12164 alloy Brass EN12165 alloy Steel UNI4838 AISI 304 100 mesh
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1
MC
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections
Standard carton quantities: B Acetylene Series: 40 MC Acetylene Series: 50
Ordering Information Part Number
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
CBB 5 520 3
Acetylene
520
.895-18 NGO RH Ext.
3/8-18 NGT
CBC 5 200 3
Acetylene
200
.625-20 NGO RH Ext.
3/8-18 NGT
Torque Values Description
Torque
Operating Torque @ 0 psig Inlet Pressure
6 - 10 in lbs
Closing Torque @ 500 psig Inlet Pressure
6 - 10 in lbs
Packing Nut Installation Torque
80 - 100 in lbs
Stem Installation Torque
45 ± 5 in lbs
Flow Data CGA Outlet Number
200
520
Orifice Ø: Diameter (inches)
.133
.133
Flow Constant: Cv - Full Open
n/a
n/a
Flow CFM @ 240 PSIG Inlet
n/a
n/a cavagnana.com
11
High Pressure Cylinder Valves
CBA
series Brass High Pressure Cylinder Valve for Industrial Gases O-Ring seal type List Features
• O-Ring technology provides superior leak integrity • Easy operation under high pressure • 100% leak test to 1.2 times cylinder service pressure • All markings are located on the valve neck to protect them from damage • Large Orifice Ø: provides faster vacuum and filling rates • Available bursting discs for all DOT cylinders • Durable forged brass body manufactured by Cavagna Group • Passes stringent oxygen adiabatic compression test • Unique seat holder design • Available configurations include: Inlet threads (NGT, UNF, DIN477, BS, EN, EN ISO) All CGA outlets available • Available with inlet threaded for DT • Unitized “plug style” pressure relief device
List Technical data Pressure Maximum Service Pressure
4,000 PSI
Temperature - Storage
-60° F ÷ 149° F
Temperature - Operating
-50° F ÷ 149° F
Life Cycle
2,000 minimum
Torque Values for PBA Acetylene valves Max Operating torque @ 0 PSIG inlet pressure Max Operating torque @ 240 PSIG inlet pressure Max Operating torque @ 2900 PSIG inlet pressure
8.8 lbs / inch 8.8 lbs / inch 17.7 lbs / inch
Max Overtorque
221 lbs / inch
Flow Capacity CV / Full open
0.47 .160 inch
Orifice Ø:
Material components
Valve Body Forged Brass EN12165 alloy Bursting disc Nickel alloy or Stainless Steel Bursting disc body Brass (also available with 212°F fusible metal) Back up Ring Nylon or PTFE Bonnet Brass Handwheel Aluminium Seat Polyamide O-rings EPDM Antifriction Delrin Stem Brass according to EN 12164 alloy
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246
12
cavagnana.com
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard
Standard carton quantities: 25 each
High Pressure Cylinder Valves
CBA
series Brass High Pressure Cylinder Valve for Industrial Gases O-Ring seal type Ordering Information Part Number CBA 8 350 6 xxxx CBA 1 350 6 xxxx CBA 6 350 6 xxxx CBA 3 350 6 xxxx CBA 9 350 6 xxxx CBA 1 695 6 xxxx CBA 1 703 6 xxxx CBA 8 580 1 xxxx CBA 1 580 1 xxxx CBA 6 580 1 xxxx CBA 3 580 1 xxxx CBG 9 580 1 xxxx CBA 1 680 1 xxxx CBA 1 677 1 xxxx CBA 8 350 6 xxxx CBA 1 350 6 xxxx CBA 6 350 6 xxxx CBA 3 350 6 xxxx CBA 9 350 6 xxxx CBA 1 695 6 xxxx CBA 1 703 6 xxxx CBA 8 350 6 xxxx CBA 1 350 6 xxxx CBA 6 350 6 xxxx CBA 3 350 6 xxxx CBA 9 350 6 xxxx CBA 1 695 6 xxxx CBA 1 703 6 xxxx CBA 8 580 1 xxxx CBA 1 580 1 xxxx CBA 6 580 1 xxxx CBA 3 580 1 xxxx CBA 9 580 1 xxxx CBA 1 680 1 xxxx CBA 1 677 1 xxxx CBA 580 1 xxxx CBA 1 580 1 xxxx CBA 6 580 1 xxxx CBA 3 580 1 xxxx CBA 9 580 1 xxxx CBA 1 680 1 xxxx CBA 1 677 1 xxxx CBA 8 346 1 xxxx CBA 1 346 1 xxxx CBA 6 346 1 xxxx CBA 3 346 1 xxxx CBA 9 346 1 xxxx CBA 1 347 1 xxxx CBA 1 702 1 xxxx CBA 8 580 1 xxxx CBA 1 580 1 xxxx CBA 6 580 1 xxxx CBA 3 580 1 xxxx CBA 9 580 1 xxxx CBA 1 680 1 xxxx CBA 1 677 1 xxxx CBA 8 555 1 xxxx CBA 1 555 1 xxxx CBA 6 555 1 xxxx CBA 3 555 1 xxxx CBA 9 555 1 xxxx CBA 8 320 1 xxxx CBA 1 320 1 xxxx CBA 6 320 1 xxxx CBA 3 320 1 xxxx CBG 9 320 1 xxxx
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
Hydrogen 0 to 3,000 psi
350
.825-14 NGO LH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
695 703
1.045-14 NGO RH Int. 1.125-14 NGO LH Int.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
Krypton 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
Methane (R50) 0 to 3,000 psi
350
.825-14 NGO LH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
695 703
1.045-14 NGO RH Int. 1.125-14 NGO LH Int.
Natural Gas 0 to 3,000 psi
350
.825-14 NGO LH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
695 703
1.045-14 NGO RH Int. 1.125-14 NGO LH Int.
Neon 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
Nitrogen 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
Air (R729) 0 psi to 3,000 psi
346
.825”- 14 NGO RH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
347 702
.825-14 NGO RH Ext. 1.125”-14 NGO RH Ext.
Argon 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
Butane/Propane Liquid Withdrawal
555
.903-14 NGO LH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
320
.825-14 NGO RH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
Carbon Dioxide (R744)
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
cavagnana.com
13
High Pressure Cylinder Valves
CBA series
Brass High Pressure Cylinder Valves for Industrial Gases Ordering Information Part Number
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
Carbon Monoxide 0 to 3,000 psi
350
.825-14 NGO LH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
695 703
1.045-14 NGO LH Int. 1.125-14 NGO LH Int.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
CBA 8 660 CBA 1 660 CBA 6 660 CBA 3 660 CBA 9 660
1,2 Dichloroethylene (R1130)
660
1.030-14 NGO RH Ext. (Face Washer Seal)
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
CBA 8 580 1 xxxx CBA 1 580 1 xxxx CBA 6 580 1 xxxx CBA 3 580 1 xxxx CBG 9 580 1 xxxx CBA 1 680 1 xxxx CBA 1 677 1 xxxx
Helium 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
Nitrous Oxide (R744a)
326
.825-14 NGO RH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
Oxygen 0 to 3,000 psi
540
.903-14 NGO RH Ext.
3,000 to 4,000 psi 4,000 to 5,500 psi
577 701
.960-14 NGO RH Ext. 1.103-14 NGO RH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
Sulfur Dioxide
660
1.030-14 NGO RH Int.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
Xenon 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
CBA 8 350 6 xxxx CBA 1 350 6 xxxx CBA 6 350 6 xxxx CBA 3 350 6 xxxx CBA 9 350 6 xxxx CBA 1 695 6 xxxx CBA 1 703 6 xxxx
CBA 8 326 1 xxxx CBA 1 326 1 xxxx CBA 6 326 1 xxxx CBA 3 326 1 xxxx CBA 9 326 1 xxxx CBA 8 540 1 xxxx CBA 1 540 1 xxxx CBA 6 540 1 xxxx CBA 3 540 1 xxxx CBA 9 540 1 xxxx CBA 1 577 1 xxxx CBA 1 701 1 xxxx CBA 8 660 1 xxxx CBA 1 660 1 xxxx CBA 6 660 1 xxxx CBA 3 660 1 xxxx CBA 9 660 1 xxxx CBA 8 580 1 xxxx CBA 1 580 1 xxxx CBA 6 580 1 xxxx CBA 3 580 1 xxxx CBA 9 580 1 xxxx CBA 1 680 1 xxxx CBA 1 677 1 xxxx
xxxx Denotes Pressure Relief Device burst disc rupture pressure. Available with: 4 and 7 thread oversize inlets: To order change the first number ”1” in the part number to ”4” or ”7” example: CBA 1 320 1 xxxx becomes CBA 4 320 1 xxxx Chromium plating: To order, change the letter ”B” in the part number to letter ”D” example: CBA 1 540 1 xxxx becomes CDA 1 540 1 xxxx Fusible backed pressure relief devices in 165° F and 212° F nominal melting temperatures: To order, change the eigth position in the part number to “5” for 165° F and “6” for 212° F example: CBA 1350 1 xxxx becomes CBA 1 350 5 xxxx for 165° F or CBA 1 350 6 xxxx for 212° F
14
cavagnana.com
High Pressure Cylinder Valves
Pressure Relief Device Selection Guide
Pressure Relief Device A Valve Assembly used for liquid gases, such as carbon dioxide and nitrous oxide, will not have fusible metal in the Pressure Relief Device as this is not allowed by the Compressed Gas Association (Publication S- 1.1). Refer to CGA S - 1.1 to select correct Pressure Relief Device type for the cylinder gas cotents of the cylinder. Note: A properly calibrated Torque Wrench MUST be used to tighten the Pressure Relief Device. Never EXCEED TORQUE OF 33 ft. lbs. Over tightening will damage the Pressure Relief Device Disc.
TABLE 2.0 PRESSURE RELIEF DEVICE SELECTION CHART FOR CBA/CBO/CDA CYLINDER VALVES SERIES Disc Rupture Range Psig @ 165° F
Cylinder Service Pressure D.O.T. Spec. 3A, 3AA, 3AL Cylinders In Psig
D.O.T. Spec. Exemption Cylinders In Psig
Pressure Relief Device Cap Stamping
Pressure Relief Device Replacement Part Number CG-1 Style Frangible Disc Only
CG-4 Style Frangible Disc & 165° F Fuse Metal
CG-5 Style Frangible Disc & 212° F Fuse Metal
2775
CS1 2775
CS4 2775
CS5 2775
3000
3000
CS1 3000
CS4 3000
CS5 3000
3025
3360
3360
CS1 3360
CS4 3360
CS5 3360
3400
3775
3775
CS1 3775
CS4 3775
CS5 3775
3600
4000
4000
CS1 4000
CS4 4000
CS5 4000
3915
4350
4350
CS1 4350
CS4 4350
CS5 4350
2670
4005
4450
4450
CS1 4450
CS4 4450
CS5 4450
2900
4350
4833
4833
CS1 4833
CS4 4833
CS5 4833
2950
4425
4917
4917
CS1 4917
CS4 4917
CS5 4917
3000
4500
5000
5000
CS1 5000
CS4 5000
CS5 5000
4860
5400
5400
CS1 5600
CS4 5600
CS5 5600
3500/3600
5250
5833
5833
CS1 5833
CS4 5833
CS5 5833
4000
6000
6665
6665
CS1 6665
CS4 6665
CS5 6665
6075
6750
6750
CS1 6750
CS4 6750
CS5 6750
7500
8333
8333
CS1 8333
CS4 8333
CS5 8333
8100
9000
9000
CS1 9000
CS4 9000
CS5 9000
9000
10000
10000
CS1 10000
CS410000
CS510000
230
4500
5000
5000
CS1 5000
CS4 5000
CS5 5000
300
5875
6525
6525
CS1 6750
CS4 6750
CS5 6750
6750
7500
7500
CS1 7500
CS4 7500
CS5 7500
ISO/UN Cylinders
Minimum
Maximum
1665
2500
2775
1800
2700
2015 2265 2400 200
3600
4500 5000 6000 6000
5000
To order chromium plated device caps CG-1 style please order CS2 + (xxxx) (Setting pressure of the rupture disc). cavagnana.com
15
High Pressure Cylinder Valves
P 2009 series
Residual High Pressure Cylinder Valves for Industrial Gases List Features
• Residual pressure valve, o-ring seal type for various gases including CO2 • Filling connector available separately, see section on page 18 for filling adapters. • Inlet threaded for DT
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
2,000 minimum
Guaranteed External Tightness Guaranteed Internal Tightness
0.788 scfm 0.788 scfm
Residual pressure device
35 to 58 PSI (according to customer‘s specifications)
Material components
Handwheel Aluminium Valve Body Brass alloy according to EN12165 O-ring EPDM Seat pad Polyamide Bursting disc Nickel alloy or Stainless Steel Spring Stainless steel or copper beryllium Seal Plastic Bursting disc body Brass Spindle Brass Spring retainer Brass
Options
Customized Handwheel logo cap Dip tube Bursting disc safety available in various settings Chromium plating Plastic Handwheel Filter Parallel thread
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246 ISO 15996
16
cavagnana.com
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard International Standard
Standard carton quantities: 25 each
High Pressure Cylinder Valves
P 2009-R series
Residual High Pressure Cylinder Valves for Industrial Gases List Features
• Residual pressure valve, o-ring seal type for various gases including CO2. • CGA R series valves are marked with an R designation. • CGA R filling connector availabe separately, see section on page 18 for filling adapters. • CGA R valves are universal and can be filled by using any manufactured R style adapter. • Inlet threaded for DT
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
2,000 minimum
Guaranteed External Tightness Guaranteed Internal Tightness
0.788 scfm 0.788 scfm
Residual pressure device
35 to 58 PSI (according to customer‘s specifications)
Material components
Handwheel Aluminium Valve Body Brass alloy according to EN12165 O-ring EPDM Seat pad Polyamide Bursting disc Nickel alloy or Stainless Steel Spring Stainless steel or copper beryllium Seal Plastic Bursting disc body Brass Spindle Brass Spring retainer Brass
Standard carton quantities: 25 each
Conforms to all requirements of:
CGA V 9 Standard for Gas Cylinder Valves CGA S-1.1 Standard for Pressure Relief Devices CGA V-1 Compressed Gas Cylinder Valve Outlet and Inlet Connections ISO 10297 International Standard ISO 14246 International Standard ISO 15996 International Standard
Options
Customized Handwheel logo cap Dip tube Bursting disc safety available in various settings Chromium plating Plastic Handwheel Filter Parallel thread
Ordering Information Part Number
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
CBV 1 320 1 xxxx CBV 1 540 1 xxxx CBV 1 580 1 xxxx CBV 1 590 1 xxxx CBV 1 555 1 xxxx CBV 1 680 1 xxxx CBV 1 350 1 xxxx CBV 1 346 1 xxxx CBV 1 347 1 xxxx CBV 7 320 1 xxxx
CO2 0 to 3,000 psi Oxygen 0 to 3,000 psi Inert 0 to 3,000 psi Air (Non-Breathing) 0 to 3,000 psi Liquid Butane/Propane 0 to 3,000 psi Inert 3,001 to 5,000 psi Hydrogen 0 to 3,000 psi Air 0 to 3,000 psi Air 3,001 to 5,000 psi CO2 0 to 3,000 psi
320 540 580 590 555 680 350 346 347 320
.825-14 NGO RH Ext. .903-14 NGO RH Ext. .965-14 NGO RH Int. .965-14 NGO LH Int. .903-14 NGO LH Ext. 1.045-14 NGO RH Int. .825-14 NGO LH Ext. .825-14 NGO RH Ext. .825-14 NGO RH Ext. .825-14 NGO RH Ext.
3/4” NGT 3/4” NGT 3/4” NGT 3/4” NGT 3/4” NGT 3/4” NGT 3/4” NGT 3/4” NGT 3/4” NGT 3/4” NGT Oversize
cavagnana.com
17
High Pressure Cylinder Valves
FILLING ADAPTERS for Residual Pressure valves
List Features
• The filling adapters are available in brass, in accordance with all Standard CGA and CGA R cylinder valve outlets • Standard CGA adapters cannot be user to fill R series valves. • CGA R adapters are universal and can be used to fill any manufactures Standard CGA R style valve • CGA R adapters cannot be used to fill Standard CGA series valves • The design with a special retractable pin is also available, to allow the adapters to be used with the standard valves series.
Options
Chromium plating
Fixed Pin
Hand wheel
Retractable Pin
Filling Adapters CGA
CGA280 CGA296 CGA320 CGA320 R CGA 346 CGA350 CGA540 CGA540R CGA580 CGA580R CGA590
18
Adapter Part Number
Description
Can Be Used With
PBX02800
CGA280 x CGA280, Fixed Pin, Hand wheel
Cavagna CGA280 RPV Outlets
PBX12800
CGA280 x 1/4”NPT, Fixed Pin, Hand wheel
Cavagna CGA280 RPV Outlets
PBX12960
CGA296 x CGA296, Retractable Pin
Cavagna CGA296 RPV Outlets
PBX03200
CGA320 x CGA320, Fixed Pin
Cavagna CGA320 RPV Outlets
PBX53200
CGA320 x 1/4”NPT, Fixed Pin, Hand wheel
Cavagna CGA320 RPV Outlets
PBX23200
CGA320 x CGA320, Retractable Pin
Any Cavagna CGA320 Outlets
PBX63200
CGA320R x CGA320R, Fixed Pin
All CGA320R Outlets
PBX73200
CGA320R x 1/4”NPT, Fixed Pin, Hand wheel
All CGA320R Outlets
PBX23460
CGA346 x CGA346, Fixed Pin
Cavagna CGA346 RPV Outlets
PBX03460
CGA346 x CGA346, Retractable Pin
Any Cavagna CGA346 Outlets
PBX03500
CGA350 x CGA350, Fixed Pin
Cavagna CGA350 RPV Outlets
PBX23500
CGA350 x CGA350, Retractable Pin
Any Cavagna CGA280 Outlets
PBX15400
CGA540 x CGA540, Fixed Pin
Cavagna CGA540 RPV Outlets
PBX05400
CGA540 x CGA540, Retractable
Any Cavagna CGA540 Outlets
PBX105400
CGA540R x 1/4”NPT, Fixed Pin, Hand wheel
All CGA540R RPV Outlets
PBX05800
CGA580 x CGA580, Fixed Pin
Any CGA580 RPV Outlets
PBX25800
CGA580 x CGA580, Retractable Pin
Any CGA580 RPV Outlets
PBX05900
CGA590 x CGA590, Retractable Pin
Any Cavagna CGA590 Outlets
cavagnana.com
High Pressure Cylinder Valves
IVIPR
series Valve with Integrated Pressure Regulator for Oxygen List Features
• Residual pressure valve with integrated Pressure Regulator • Ergonomically designed with a compact, user friendly casing • All of the user’s primary functions are visible and accessible from one side without turning the cylinder • Suitable for Oxygen • Meets all the requirements of ISO 22435, EN-ISO 15996
List Technical data Pressure Service Pressure up to
4,350 PSI
Test Pressure
7,250 PSI
Outlet pressure
adjustable 0 to 145 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
2,000 minimum
Guaranteed External Tightness Guaranteed Internal Tightness
0.788 scfm 0.788 scfm
Residual pressure range
35 to 58 PSI (according to customer‘s specifications) Q1 30 m3/h
CV Factor
0.1 Cv
Flow Coefficient
Material components
Handwheel Aluminium Valve Body Brass alloy according to EN12165 O-ring EPDM Main shut off seat pad PA66 Spring Stainless steel AlSI 302 Sealing cap Acetal resin Spring regulator Cu Be, AISI Filter Sintered Bronze Diaphragms pressure reducer seat HYTREL 5526 Toroidal ring EPDM
Options
Threaded connection and quick connection available according to EN 561
Shroud Available Part Number
3079500125
Color Dark Grey
cavagnana.com
19
High Pressure Cylinder Valves
IVIPR
series Valve with Integrated Pressure Regulator for Ar/CO2 Mix and Inert Gases Mix List Features
• Residual pressure valve with integrated Pressure Regulator • Ergonomically designed with a compact, user friendly casing • All of the user’s primary functions are visible and accessible from one side without turning the cylinder • Suitable for Ar/CO2 mix and Inert Gases Mix • Meets all the requirements of ISO 22435, EN-ISO 15996
List Technical data Pressure Service Pressure up to Test Pressure
4,350 PSI 7,250 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
2,000 minimum
Guaranteed External Tightness Guaranteed Internal Tightness
0.788 scfm 0.788 scfm
Residual pressure range
35 to 58 PSI (according to customer‘s specifications) Q1 0-40 L/min
CV Factor
0.1 Cv
Flow Coefficient
Material components
Handwheel Aluminium Valve Body Brass alloy according to EN12165 O-ring EPDM Main shut off seat pad PA66 Spring Stainless steel AlSI 302 Sealing cap Acetal resin Spring regulator Cu Be, AISI Filter Sintered Bronze Diaphragms pressure reducer seat HYTREL 5526 Toroidal ring EPDM
Options
Threaded connection and quick connection available according to EN 561
Shroud Available Part Number
3079500125
20
cavagnana.com
Color Dark Grey
High Pressure Cylinder Valves
IVIPR
series Valve with Integrated Pressure Regulator for Acetylene List Features
• Valve with integrated Pressure Regulator • Ergonomically designed with a compact, user friendly casing • All of the user’s primary functions are visible and accessible from one side without turning the cylinder • Suitable for Acetylene • Meets all the requirements of ISO 22435 (except acetylene decomposition test)
List Technical data Pressure Service Pressure up to Test Pressure Outlet Pressure
363 PSI 435 PSI adjustable 0 to 17.4 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
2,000 minimum
Guaranteed External Tightness Guaranteed Internal Tightness
0.788 scfm 0.788 scfm
CV Factor
Q1 1 m3/h 0.1 Cv
Flow Coefficient
Material components
Handwheel Aluminium Valve Body Brass alloy according to EN12165 O-ring EPDM Main shut off seat pad PEEK Spring Stainless steel AlSI 302 Sealing cap Acetal resin Spring regulator AISI Filter Sintered Bronze Diaphragms pressure reducer seat HYTREL 5526 Toroidal Ring EPDM
Options
Threaded connection and quick connection available according to EN 561
Shroud Available Part Number
3079500141
Color
Code
3079500141
Dark Grey
cavagnana.com
21
High Pressure Cylinder Valves
IVIPR
series Valve with Integrated Pressure Regulator Adapters & Shrouds
FILLING ADAPTERS
Code
Code
PBX25800
Retractable Pin Hand wheel
Code
Code
PBX25400
Fixed Pin
PBX25100
Fixed Pin Hand wheel
Code
3079500125
High Pressure Cylinders with 3 1/8” Neck Ring
3079500141
Acetylene Cylinders with 3 1/2” Spud
Filling Adapters Valve Part Number
Description
Adapter Part Number
Description
MRA3SAD017
Acetylene I-VIPR
PBX25100
CGA510 x 1/4”NPT Fixed Pin, Hand wheel
MRA1SOS001
Oxygen I-VIPR
PBX45400
CGA540 x 1/4”NPT, Retractable Pin, Hand wheel
MRA2SMX001
Inert Gases I-VIPR
PBX05800
VGA580 x CGA580, Fixed Pin
Protective Shrouds Valve Part Number
MRA1SOS001 MRA2SMX001 MRA3SAD017
22
cavagnana.com
Description Ivipr series CGA 540 Oxygen Ivipr series CGA 580 Inert Gases Ivipr series CGA 510 Acetylene
Shroud Part Number
3079500125 3079500125 3079500141
Description Ivipr Shroud CGA 540 Dark Grey Ivipr Shroud CGA 580 Dark Grey Ivipr Shroud CGA 510 Dark Grey
High Pressure Cylinder Valves
NOS
series Chromium Plated Brass High Pressure Cylinder Valves for Nitrous Oxide - O-Ring seal type
List Features
• O-Ring technology provides superior leak integrity • Easy operation under high pressure • 100% leak test to 1.2 times cylinder service pressure • Available bursting discs for all DOT cylinders • Different inlet threads available upon request
List Technical data Part Number
VOA9APA001
CCS300013000
Maximum Service Pressure Test
3,000 PSI 3,597 PSI
1,800 PSI 2,161 PSI
Temperature - Storage
-60° F ÷ 149° F
-60° F ÷ 149° F
Temperature - Operating
-50° F ÷ 149° F
-50° F ÷ 149° F
Pressure
2,000 minimum
Life Cycle
221 lbs / inch
Max Overtorque
79 lbs / inch n/a
CV Factor / Full open .315”
Orifice Ø:
CCS300013000
.260”
Standard carton quantities: 72 each
Material components CCS300013000
Valve Body Brass according to EN12164 alloy Bursting disc Nickel alloy Bursting disc body Brass Back up Ring PTFE Bonnet Brass Handwheel Plastic Seat Polyamide O-rings EPDM Stem Brass according to EN 12164 alloy
Material components
Valve Body Forged Brass according to EN12165 alloy Bursting disc Nickel alloy Bursting disc body Brass (also available with 212°F fusible metal) Back up Ring Polyamide Bonnet Brass Handwheel Aluminium Seat Polyamide O-rings EPDM Antifriction Polyamide Stem Brass according to EN 12164 alloy
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections
VOA9APA001 Standard carton quantities: 72 each
Ordering Information Part Number
Gas Service
Outlet Thread Size
CCS300013000
Nitrous Oxide
1/4-27 NPT
VOA9APA001
Nitrous Oxide
CGA 660
Inlet Thread Size .625-18 UNF 2A .750-16 UNF 2A 1.125-12 UNF 2A cavagnana.com
23
Corrosive, Pure and Ultrapure Gases DIASPEC B200 series Brass High Pressure Diaphragm Seal Valve for High Purity Gases
26
DIASPEC S200 series Stainless Steel High Pressure Diaphragm Seal Valve for High Purity Gases
27
DIASPEC TD S200 series Stainless Steel High Pressure Tied Diaphragm Seal Valve for High Purity Gases
28
cavagnana.com
25
Corrosive, Pure, Ultrapure Gases
DIASPEC B200
series Brass High Pressure Diaphragm Seal Valve for High Purity Gases List Features
• Low operating torque guaranteed due to soft sealing • Valve seat secured against extrusion • Extreme leak tightness achieved by diaphragm sealing • High Flow Capacity to allow a fast filling and vacuum • Clean room assembly • 100% helium leak test • All markings on the valve neck protected against damage • Durable forged brass bodies manufactured by Cavagna Group • All inlets and outlets standards available • Inlet threaded for DT
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature - Storage
-40°F ÷ +149°F
Temperature - Operating
-40°F ÷ +149°F
Life Cycle
2,000 minimum Internal External Safety
Helium leak rate
10E-7 atm cc/s 10E-7 atm cc/s 10E-8 atm cc/s
0.4
CV Factor
4 mm
Seat orifice dimension
Material components
Body Material: Brass Diaphragm: Stainless steel Hastelloy Spindle: Brass Seat Disc: PA 6,6 PCTFE Bursting Disc: Nickel AISI 316 L
Options
Chrome or Nickel plated treatment Different diptube connections available Customized Handwheel logocap Various bursting disc settings available Cleaned for UHP/ECD applications Prepared for flow restrictor attachment
Ordering information V= valve D= diaphragm A1= brass body Seat disc: Diaphragm: Hastelloy N= Family
PCTFE Stainless steel
Gas Identification Progressive number: Example: VDA1NOS001
26
cavagnana.com
to identify customer personalization, different inlet and outlet threads, bursting disc setting pressure.
Standard carton quantities: 25 each
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard
Corrosive, Pure, Ultrapure Gases
DIASPEC S200
series Stainless Steel High Pressure Diaphragm Seal Valve for High Purity Gases List Features
• Low operating torque guaranteed due to soft sealing • Valve seat secured against extrusion • Extreme leak tightness achieved by diaphragm sealing • High Flow Capacity to allow a fast filling and vacuum • Clean room assembly • 100% helium leak test • All markings on the valve neck protected against damage • All inlets and outlets standards available • Inlet threaded for DT
List Technical data Pressure Maximum Service Pressure Test
2,900 PSI 3,480 PSI
Temperature - Storage
-40°F ÷ +149°F
Temperature - Operating
-40°F ÷ +149°F
Life Cycle
2,000 minimum Internal External Safety
Helium leak rate
10E-7 atm cc/s 10E-7 atm cc/s 10E-8 atm cc/s
0.4
CV Factor
4 mm
Seat orifice dimension
Material components
Body Material: AISI 316 L Diaphragm: Hastelloy Stainless Steel Spindle: AISI 316 L Seat Disc: PA 6,6 PCTFE Bursting disc: Nickel AISI 316 L
Options
Different diptube threads connections available Customized Handwheel logocap Various bursting disc settings available All components in contact with the gas are electrochemically polished. Cleaned for UHP/ECD applications Prepared for flow restrictor attachment
Standard carton quantities: 25 each
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard
Ordering information V= valve D= diaphragm A1= AISI 316 L body Seat disc: Diaphragm: N= Family
PCTFE AISI 316 L Hastelloy or Stainless steel
Gas Identification Progressive number: Example: VDA2NOS001
to identify customer personalization, different inlet and outlet threads, bursting disc setting pressure.
cavagnana.com
27
Corrosive, Pure, Ultrapure Gases
DIASPEC TD S200
series Steel High Pressure Tied Diaphragm Seal Valve for High Purity Gases
List Features
• Low operating torque guaranteed thanks to the teflon coating upper stem • Valve seat pad secured against extrusion • Extreme leak tightness achieved by back-up welded diaphragm sealing • High Flow Capacity to allow a fast filling and vacuum purging • Clean room assembly • 100% helium leak test • All markings on the valve neck protected against damage • All inlets and outlets standards available • Easy purging process allowed by reduced dead spaces and gas wetted volumes • Lock of threads and springs in the wet area ensures minimum particulate generation • Gas doesn’t contact with the valve operating mechanism
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature - Storage
-40°F ÷ +149°F
Temperature - Operating
-40°F ÷ +149°F
Life Cycle
2,000 minimum Internal External Safety
Helium leak rate
0.4
CV Factor
Material components Body Material: Diaphragm: Spindle: Seat Disc: Bursting disc:
Options
10E-8 atm cc/s 10E-8 atm cc/s 10E-8 atm cc/s
AISI 316 L Hastelloy Stainless Steel AISI 430F AISI 316 L PCTFE Nickel - AISI 316L AISI 316 L
Different dip tube thread connections available Customized Handwheel logocap Various bursting disc settings available Gas tight outlet cap & chain Cleaned for UHP/ECD applications Prepared for flow restrictor attachment (DISS)
Ordering information V= valve D= diaphragm A1= brass body Seat disc: Diaphragm: Hastelloy N= Family
PCTFE Stainless steel
Gas Identification Progressive number: Example: VDA1NOS001
28
cavagnana.com
to identify customer personalization, different inlet and outlet threads, bursting disc setting pressure.
Standard carton quantities: 25 each
Medical Equipment CDA series Chromium Plated Brass High Pressure Cylinder Valves for Medical Gases O-Ring seal type
30
P 2009 series Residual Pressure Valve for Medical gases
33
P 2009-R series Residual Pressure Valve for Medical gases
34
PDE series Post Medical Cylinder Valves Pin Index System O-Ring seal type
35
PDE series Post Medical Cylinder Valves Pin Index System O-Ring seal type - MRI Conditional
37
VIPROXY 1 Touch series Valve with Integrated Pressure Reducer for medical Oxygen
39
AirVIPR Valve with Integrated Pressure Reducer for Air
41
VIPROXY 1Touch NEOS Valve with Integrated Pressure Reducer for medical Oxygen
42
VIPROXY 1Touch series Adapters
43
cavagnana.com
29
Medical Equipment
CDA
series Chromium Plated Brass High Pressure Cylinder Valves for Medical Gases - O-Ring seal type
List Features
• O-Ring technology provides superior leak integrity • Easy operation under high pressure • 100% leak test to 1.2 times cylinder service pressure • All marking on the valve neck, protects against damage • Large Orifice Ø: provides faster vacuum and filling rates • Available bursting discs for all DOT cylinders • Durable forged brass body manufactured by Cavagna Group • Passes stringent oxygen adiabatic compression test • Available configurations include: Inlet threads (NGT, UNF, DIN477, BS, EN, EN ISO) • All CGA outlets available • Unitized “plug style” bursting disc
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature - Storage
-60° F ÷ 149° F
Temperature - Operating
-50° F ÷ 149° F
Life Cycle
2,000 minimum 221 lbs / inch
Max Overtorque CV Factor / Full open
4 mm
Orifice Ø:
Standard carton quantities: 25 each
n/a .160”
Material components
Valve Body Forged Brass according to EN12165 alloy Bursting disc Nickel alloy Bursting disc body Brass (also available with 212°F fusible metal) Back up Ring PTFE Bonnet Brass Handwheel Aluminium Seat Polyamide O-rings EPDM Antifriction Delrin Stem Brass according to EN 12164 alloy
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246
30
cavagnana.com
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard
CDA
Medical Equipment
series Chromium Plated Brass High Pressure Cylinder Valves Ordering Information Part Number CDA 8 350 6 xxxx CDA 1 350 6 xxxx CDA 6 350 6 xxxx CDA 3 350 6 xxxx CDA 9 350 6 xxxx CDA 1 695 6 xxxx CDA 1 703 6 xxxx CDA 8 580 1 xxxx CDA 1 580 1 xxxx CDA 6 580 1 xxxx CDA 3 580 1 xxxx CDG 9 580 1 xxxx CDA 1 680 1 xxxx CDA 1 677 1 xxxx CDA 8 350 6 xxxx CDA 1 350 6 xxxx CDA 6 350 6 xxxx CDA 3 350 6 xxxx CDA 9 350 6 xxxx CDA 1 695 6 xxxx CDA 1 703 6 xxxx CDA 8 350 6 xxxx CDA 1 350 6 xxxx CDA 6 350 6 xxxx CDA 3 350 6 xxxx CDA 9 350 6 xxxx CDA 1 695 6 xxxx CDA 1 703 6 xxxx CDA 8 580 1 xxxx CDA 1 580 1 xxxx CDA 6 580 1 xxxx CDA 3 580 1 xxxx CDA 9 580 1 xxxx CDA 1 680 1 xxxx CDA 1 677 1 xxxx CDA 8 580 1 xxxx CDA 1 580 1 xxxx CDA 6 580 1 xxxx CDA 3 580 1 xxxx CDA 9 580 1 xxxx CDA 1 680 1 xxxx CDA 1 677 1 xxxx CDA 8 346 1 xxxx CDA 1 346 1 xxxx CDA 6 346 1 xxxx CDA 3 346 1 xxxx CDA 9 346 1 xxxx CDA 1 347 1 xxxx CDA 1 702 1 xxxx CDA 8 580 1 xxxx CDA 1 580 1 xxxx CDA 6 580 1 xxxx CDA 3 580 1 xxxx CDA 9 580 1 xxxx CDA 1 680 1 xxxx CDA 1 677 1 xxxx CDA 8 555 1 xxxx CDA 1 555 1 xxxx CDA 6 555 1 xxxx CDA 3 555 1 xxxx CDA 9 555 1 xxxx CDA 8 320 1 xxxx CDA 1 320 1 xxxx CDA 6 320 1 xxxx CDA 3 320 1 xxxx CDG 9 320 1 xxxx
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
Hydrogen 0 to 3,000 psi
350
.825-14 NGO LH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
695 703
1.045-14 NGO RH Int. 1.125-14 NGO LH Int.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
Krypton 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
Methane (R50) 0 to 3,000 psi
350
.825-14 NGO LH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
695 703
1.045-14 NGO RH Int. 1.125-14 NGO LH Int.
Natural Gas 0 to 3,000 psi
350
.825-14 NGO LH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
695 703
1.045-14 NGO RH Int. 1.125-14 NGO LH Int.
Neon 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
Nitrogen 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
Air (R729) 0 psi to 3,000 psi
346
.825”- 14 NGO RH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
347 702
.825-14 NGO RH Ext. 1.125”-14 NGO RH Ext.
Argon 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi ,501 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
Butane/Propane Liquid Withdrawal
555
.903-14 NGO LH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
320
.825-14 NGO RH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
Carbon Dioxide (R744)
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT 1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
cavagnana.com
31
Medical Equipment
CDA series
O-ring Industrial Gas Cylinder Valve Ordering Information Part Number
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
Carbon Monoxide 0 to 3,000 psi
350
.825-14 NGO LH Ext.
3,000 to 5,500 psi 5,500 to 7,500 psi
695 703
1.045-14 NGO LH Int. 1.125-14 NGO LH Int.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
CDA 8 660 CDA 1 660 CDA 6 660 CDA 3 660 CDA 9 660
1,2 Dichloroethylene (R1130)
660
1.030-14 NGO RH Ext. (Face Washer Seal)
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
CDA 8 580 1 xxxx CDA 1 580 1 xxxx CDA 6 580 1 xxxx CDA 3 580 1 xxxx CDG 9 580 1 xxxx CDA 1 680 1 xxxx CDA 1 677 1 xxxx
Helium 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
Nitrous Oxide (R744a)
326
.825-14 NGO RH Ext.
1/2”-14 NGT” 3/4”-14 NGT” 1-11 1/2 NGT .750”-16 UNF” 1.125” -12 UNF”
Oxygen 0 to 3,000 psi
540
.903-14 NGO RH Ext.
3,000 to 4,000 psi 4,000 to 5,500 psi
577 701
.960-14 NGO RH Ext. 1.103-14 NGO RH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
Sulfur Dioxide
660
1.030-14 NGO RH Int.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF
Xenon 0 to 3,000 psi
580
.965-14 NGO RH Int.
3,000 to 5,500 psi 5,500 to 7,500 psi
680 677
1.045-14 NGO RH Int. 1.030-14 NGO LH Ext.
1/2”-14 NGT 3/4”-14 NGT 1-11 1/2 NGT .750”-16 UNF 1.125” -12 UNF 3/4”-14 NGT 3/4”-14 NGT
CDA 8 350 6 xxxx CDA 1 350 6 xxxx CDA 6 350 6 xxxx CDA 3 350 6 xxxx CDA 9 350 6 xxxx CDA 1 695 6 xxxx CDA 1 703 6 xxxx
CDA 8 326 1 xxxx CDA 1 326 1 xxxx CDA 6 326 1 xxxx CDA 3 326 1 xxxx CDA 9 326 1 xxxx CDA 8 540 1 xxxx CDA 1 540 1 xxxx CDA 6 540 1 xxxx CDA 3 540 1 xxxx CDA 9 540 1 xxxx CDA 1 577 1 xxxx CDA 1 701 1 xxxx CDA 8 660 1 xxxx CDA 1 660 1 xxxx CDA 6 660 1 xxxx CDA 3 660 1 xxxx CDA 9 660 1 xxxx CDA 8 580 1 xxxx CDA 1 580 1 xxxx CDA 6 580 1 xxxx CDA 3 580 1 xxxx CDA 9 580 1 xxxx CDA 1 680 1 xxxx CDA 1 677 1 xxxx
xxxx Denotes Pressure Relief Device burst disc rupture pressure. Available with: “4 and 7 thread oversize inlets: To order change the first number ”1” in the part number to ”4” or ”7” example: CBA 1 320 1 xxxx becomes CBA 4 320 1 xxxx Chromium plating: To order, change the letter ”B” in the part number to letter ”D” example: CBA 1 540 1 xxxx becomes CDA 1 540 1 xxxx Fusible backed pressure relief devices in 165 °F and 212 °F nominal melting temperatures: To order, change the eigth position in the part number to ”5” for 165 °F and “6” for 212 °F example: CBA 1350 1 xxxx becomes CBA 1 350 5 xxxx for 165 °F or CBA 1 350 6 xxxx for 212 °F
32
cavagnana.com
Medical Equipment
P2009 series
Residual Pressure Valve for Medical gases
List Features
• Residual pressure valve, o-ring seal type for various gases including Oxygen. • Filling connector available separately see section on page 18 for filling adapters. • Inlet threaded for DT
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
2,000 minimum
Guaranteed External Tightness Guaranteed Internal Tightness
0.788 scfm 0.788 scfm
Residual pressure device
35 to 58 PSI (according to customer‘s specifications)
Material components
Handwheel Aluminium Valve Body Brass alloy according to EN12165 O-ring EPDM Seat pad Polyamide Bursting disc Nickel alloy or Stainless Steel Spring Stainless steel or copper beryllium Seal Plastic Bursting disc body Brass Spindle Brass Spring retainer Brass
Standard carton quantities: 25 each
Options
Customized Handwheel logo cap Dip tube Bursting disc safety available in various settings Chromium plating Plastic Handwheel Filter Parallel thread
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246 ISO 15996
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard International Standard
cavagnana.com
33
Medical Equipment
P2009-R series
Residual Pressure Valve for Medical gases
List Features
• Residual pressure valve, o-ring seal type for various gases including Oxygen. • CGA R series valves are marked with an R designation. • CGA R filling connector availabe separately see section on page 18 for filling adapters. • CGA R valves are universal and can be filled by using any manufactured R style adapter. • Inlet threaded for DT
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
2,000 minimum
Guaranteed External Tightness Guaranteed Internal Tightness
0.788 scfm 0.788 scfm
Residual pressure device
35 to 58 PSI (according to customer‘s specifications)
Material components
Handwheel Aluminium Valve Body Brass alloy according to EN12165 O-ring EPDM Seat pad Polyamide Bursting disc Nickel alloy or Stainless Steel Spring Stainless steel or copper beryllium Seal Plastic Bursting disc body Brass Spindle Brass Spring retainer Brass
Options
Customized Handwheel logo cap Dip tube Bursting disc safety available in various settings Chromium plating Plastic Handwheel Filter Parallel thread
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246 ISO 15996
34
cavagnana.com
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard International Standard
Standard carton quantities: 25 each
PDE
Medical Equipment
series Post Medical Cylinder Valves Pin Index System O-Ring seal type List Features
• O-Ring technology provides superior leak integrity • Easy operation under high pressure • High quality Nickel Chromium plating protects against harmful chemicals • 100% leak test to full cylinder service pressure • Body made from extruded brass rod - Fits all CGA specified yokes • Passes stringent oxygen adiabatic compression test • Unique stem design meets CGA performance criteria, designed shear point allows stem to break above the spindle nut if over torqued or shocked due to careless handling • Aluminum cylinder valve supplied with Teflon O-Ring for fast and easy installation • Oxygen cleaned to meet CGA G4.1 specifications • Clean room assembly
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature range - Storage
-60° F ÷ 149° F
Temperature range - Operating
-50° F ÷ 149° F
Life Cycle
2,000 minimum
Torque Values for PDE series valve Wrench operated Operating torque @ 0 PSIG inlet pressure Closing torque @ 3000 PSIG inlet pressure
3 lbs/inch 8 - 12 lbs/inc
Toggle Operating torque @ 0 PSIG inlet pressure Closing torque @ 2000 PSIG inlet pressure
2 lbs/inch 8 - 10 lbs/inch
Material components
Valve Body Chromium plated Brass Bursting disc Nickel alloy 201 Handwheel Aluminium Seat Polyamide O-Rings EPDM Anti Friction Ring PEEK Stem Chromium plated Brass Inlet O-ring PTFE Back up ring Nylon Toggle Chromium Plated Brass
Standard carton quantities: Post Valves 50 each
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard
cavagnana.com
35
PDE
Medical Equipment
series Post Medical Cylinder Valves Pin Index System O-Ring seal type Ordering Information Part Number
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
PDE 8 950 5 3360 PDE 3 950 5 3360
Air
950
Pins #1 and #5
1/2-14 NGT .750-16 UNF-2A
PDE 8 940 1 3360 PDE 3 940 1 3360
Carbon Dioxide
940
Pins #1 and #6
1/2-14 NGT .750-16 UNF-2A
PDE 8 920 1 3360 PDE 3 920 1 3360
Cyclopropane
920
Pins #3 and #6
1/2-14 NGT .750-16 UNF-2A
PDE 8 900 5 3360 PDE 3 900 5 3360
Ethylene
900
Pins #1 and #3
1/2-14 NGT .750-16 UNF-2A
PDE 8 930 5 3360 PDE 3 930 5 3360
Helium
930
Pins #4 and #6
1/2-14 NGT .750-16 UNF-2A
PDE 8 973 5 3360 PDE 3 973 5 3360
Medical Gas Mixtures
973
Pins #11 and #24
1/2-14 NGT .750-16 UNF-2A
PDE 8 960 5 3360 PDE 3 960 5 3360
Nitrogen
960
Pins # 1 and #4
1/2-14 NGT .750-16 UNF-2A
PDE 8 910 1 3360 PDE 3 910 1 3360
Nitrous Oxide
910
Pins # 3 and #5
1/2-14 NGT .750-16 UNF-2A
PDE 8 965 5 3360 PDE 3 965 5 3360
Nitrous Oxide & Oxygen Mixtures
965
Pin #7
1/2-14 NGT .750-16 UNF-2A
PDE 8 870 5 3360 PDE 3 870 5 3360
Oxygen
870
Pins #2 and #5
1/2-14 NGT .750-16 UNF-2A
PDE 8 880 5 3360 PDE 3 880 5 3360
Oxygen & Carbon Dioxide Mixtures
880
Pins # 2 and #6
1/2-14 NGT .750-16 UNF-2A
PDE 8 890 5 3360 PDE 3 890 5 3360
Oxygen & Helium Mixtures
890
Pins # 2 and #4
1/2-14 NGT .750-16 UNF-2A
All valves are supplied with safety relief devices as specified by the Compressed Gas Association Standard S1.1. Safety relief devices are flush style CG-4 devices backed by 165 F fuse metal, except valves specified for Carbon Dioxide (CGA 940), Cyclopropane (CGA 920) and Nitrous Oxide (CGA 940), where a CG-1 hex style pressure relief device without fuse metal is required. All valves are supplied with rupture discs rated for cylinders with a service pressure of 2,015 psig. Rupture discs rated for other cylinder service pressures are available upon request.
Optional Features:
Handwheel - example: PDE 8 890 5 3360 changes to PDU 8 890 5 3360 Chromium Plated Toggle- example: PDE 8 890 5 3360 changes to PDF 8 890 5 3360 1/8”-27 NPT gauge port - example: PDE 8 890 5 3360 changes to PDP 8 890 5 3360 (only available with toggle)
36
cavagnana.com
PDE M
Medical Equipment
series Post Medical Cylinder Valves Pin Index System O-Ring seal type - MRI Conditional List Features
• O-Ring technology provides superior leak integrity • Meets MRI-conditional Level 3 Tesla requirements • Easy operation under high pressure • High quality Nickel Chromium plating protects against harmful chemicals • 100% leak test to full cylinder service pressure • Body made from extruded brass rod - Fits all CGA specified yokes • Passes stringent oxygen adiabatic compression test • Unique stem design meets CGA performance criteria, designed shear point allows stem to break above the spindle nut if over torqued or shocked due to careless handling • Aluminum cylinder valve supplied with Teflon O-Ring for fast and easy installation • Oxygen cleaned to meet CGA G4.1 specifications • Clean room assembly
List Technical data Pressure Maximum Service Pressure Test
3,336 PSI 4,000 PSI
Temperature range - Storage
-60° F ÷ 149° F
Temperature range - Operating
-50° F ÷ 149° F
Life Cycle
2,000 minimum
Torque Values for PDE series valve Wrench operated Operating torque @ 0 PSIG inlet pressure Closing torque @ 3000 PSIG inlet pressure
3 lbs/inch 8 - 12 lbs/inc
Toggle Operating torque @ 0 PSIG inlet pressure Closing torque @ 2000 PSIG inlet pressure
2 lbs/inch 8 - 10 lbs/inch
Material components
Valve Body Chromium plated Brass Bursting disc Nickel alloy 201 Handwheel Aluminium Seat Polyamide O-Rings EPDM Anti Friction Ring PEEK Stem Chromium plated Brass Inlet O-ring PTFE Back up ring Nylon Toggle Chromium Plated Brass
Standard carton quantities: Post Valves 50 each
Conforms to all requirements of: CGA V 9 CGA S-1.1 CGA V-1 ISO 10297 ISO 14246
Standard for Gas Cylinder Valves Standard for Pressure Relief Devices Compressed Gas Cylinder Valve Outlet and Inlet Connections International Standard International Standard
cavagnana.com
37
PDE M
Medical Equipment
series Post Medical Cylinder Valves Pin Index System O-Ring seal type - MRI Conditional Ordering Information Part Number
Gas Service
CGA Outlet
Outlet Thread Size
Inlet Thread Size
PDE 3 950 5 3360 M
Air
950
Pins #1 and #5
.750-16 UNF-2A
PDE 3 930 5 3360 M
Helium
930
Pins #4 and #6
.750-16 UNF-2A
PDE 3 870 5 3360 M
Oxygen
870
Pins #2 and #5
.750-16 UNF-2A
PDE 3 910 5 3360 M
Nitrous Oxide
910
Pins #3 and #5
.750-16 UNF-2A
All valves are supplied with safety relief devices as specified by the Compressed Gas Association Standard S1.1. Safety relief devices are flush style CG-4 devices backed by 165 F fuse metal, except valves specified for Carbon Dioxide (CGA 940), Cyclopropane (CGA 920) and Nitrous Oxide (CGA 940), where a CG-1 hex style pressure relief device without fuse metal is required. All valves are supplied with rupture discs rated for cylinders with a service pressure of 2,015 psig. Rupture discs rated for other cylinder service pressures are available upon request.
Optional Features:
Aluminum Toggle- example: PDE 3 870 5 3360 changes to PDF 3 870 5 3360
38
cavagnana.com
VIPROXY
Medical Equipment
1 Touch series Valve with Integrated Pressure Reducer for medical Oxygen
Features
• 1 Touch incorporates a low torque non rotating spindle shut off valve with an integrated ten position flow selector device • Valve with integrated pressure regulator for Medical Oxygen, MRI conditional certified up to 3 Tesla • Non-return valve with sinterized bronze filter integrated in the filling port • Piston regulator • Sinterized bronze smart filter in the cylinder connection • Tested and approved in accordance with the International Standards EN ISO 10524-3, CGA E-18 • Residual pressure device incorporated • Active gauge with fluorescent screen
Technical data Pressure Maximum Service Pressure Outlet Pressure Residual Pressure Range
3,360 PSI 50 PSI 43 - 72 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
4,000 minimum
Flow Rate
2,400 Nl/m
Part Number
MVA2UOS010
1/4”
Hose-barb Ø
0.5, 1, 1.5, 2, 3, 4, 6, 8, 10, 15, 25 l/m
Flow Rates
~166 mm (6.54”)
Material components
Body in forged brass Valve Main Sealing in Nylon Regulator Sealing in Nylon Elastomer in EPDM The valve is not made of any ferrous material or steel
Ordering Information Part Number
Inlet
Fill Connection
MVA2UOS010
.750 UNF
CGA 540
3360 PSI
ME
~102 mm (4.02”)
Protective Shroud for MVA2UOS010
~114 mm (4.49”)
3079500050
Bursting Disc Cylinder Type
cavagnana.com
39
Features
• 1 Touch incorporates a low torque non rotating spindle shut off valve with an integrated ten position flow selector device • Valve with integrated pressure regulator for Medical Oxygen, MRI compatible certified up to 3 Tesla • Non-return valve with sinterized bronze filter integrated in the filling port • Piston regulator • Sinterized bronze smart filter in the cylinder connection • Tested and approved in accordance with the International Standards EN ISO 10524-3, CGA E-18 • Residual pressure device incorporated • Active gauge with fluorescent screen
Technical data Pressure Maximum Service Pressure Outlet Pressure Residual Positive Pressure
3,360 PSI 50 PSI 43 - 72 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
4,000 minimum
Flow Rate
2,400 Nl/m
Part Number
MVA2UOS002
1/4”
Hose-barb Ø Flow Rates
184 mm (7.24”)
0.5, 1, 1.5, 2, 3, 4, 6, 8, 10, 15, 25 l/m
Material components
Body in forged brass Valve Main Sealing in Nylon Regulator Sealing in Nylon Elastomer in EPDM The valve is not made of any ferrous material or steel
Ordering Information Part Number
Inlet
Fill Connection
MVA2UOS002
.750 UNF
CGA 540
3079500112
Bursting Disc Cylinder Type
Protective Shroud
3360 PSI
ME 112 mm (4.41”)
120 mm (4.72”)
Medical Equipment
VIPROXY
1 Touch series Valve with Integrated Pressure Reducer for medical Oxygen
40
cavagnana.com
AirVIPR
Medical Equipment
series Valve with Integrated Pressure Reducer for Air
Features
• AirVIPR incorporates a low torque non rotating spindle shut off valve with an integrated ten position flow selector device • Valve with integrated pressure regulator for Air, MRI compatible certified up to 3 Tesla • Non-return valve with sinterized bronze filter integrated in the filling port • Piston regulator • Sinterized bronze smart filter in the cylinder connection • Tested and approved in accordance with the International Standards EN ISO 10524-3, CGA E-18 • Residual pressure device incorporated • Active gauge with fluorescent screen
Technical data Pressure Maximum Service Pressure Outlet Pressure Residual Positive Pressure
3,360 PSI 50 PSI 43 - 72 PSI
Temperature Range
-40°F ÷ +149°F
Life Cycle
4,000 minimum
Flow Rate
2,400 Nl/m
Part Number
MVA2UAI001
1/4”
Hose-barb Ø
184 mm (7.24”)
1, 2, 3, 4, 6, 8, 10, 12, 15,20, 25 l/m
Flow Rates
Material components
Body in forged brass Valve Main Sealing in Nylon Regulator Sealing in Nylon Elastomer in EPDM The valve is not made of any ferrous material or steel
Ordering Information Part Number
Inlet
Fill Connection
MVA2UAI001
.750 UNF
CGA 346
3079500166
Bursting Disc Cylinder Type 3360 PSI
Protective Shroud for MVA2UAI001
ME 112 mm (4.41”)
CGA
Adapter Part Number
Description
CGA 346
PBX23460
CGA346 x CGA346, Fixed Pin
120 mm (4.72”)
Filling Adapters:
cavagnana.com
41
Features
• NEOS incorporates a low torque non rotating spindle shut off valve with an
integrated ten position flow selector • Valve with integrated pressure regulator for Medical Oxygen, MRI conditional certified up to 3 Tesla • Non-return valve with sintered bronze filter integrated in the filling port • Piston regulator • Sintered bronze smart filter in the cylinder connection • Tested and approved in accordance with the International Standards EN ISO 10524-3, CGA E-18 • Residual pressure device incorporated • Digital gauge with backlight display
Technical data Pressure Maximum Service Pressure Outlet Pressure Residual Pressure Range
3,360 PSI 50 PSI 43 - 72 PSI
Operative Temperature Range
-32°F ÷ +122°F
Shut Off Valve Life Cycle
4,000 minimum
Part Number
MVA2EOS037
2,400 Nl/min
Flow Rate
1/4”
Hose-barb Ø
0.5, 1, 1.5, 2, 3, 4, 6, 8, 10, 15, 25 l/min
Flow Rates
Material components
Chromium plated brass body Valve Main Sealing in Nylon Regulator Sealing in Nylon Elastomer in EPDM The valve is not made of any ferrous material or steel
195.5mm (7.70”)
Ordering Information Part Number
Inlet
MVA2EOS037
.750-16 UNF2A
Fill Connection
Bursting Disc Cylinder Type
CGA 540
3,360 PSI
3079500153
Protective Shroud for MVA2UOS037
3071100380
Display Cover
3079500123
Control Group
ME 122.7mm (4.83”)
132.3mm (5.21”)
Medical Equipment
VIPROXY
1 Touch NEOS series Valve with Integrated Pressure Reducer for medical Oxygen
42
cavagnana.com
VIPROXY
Medical Equipment
1 Touch series Valve with Integrated Pressure Reducer for medical Oxygen Adapters FILL ADAPTERS
Code
Code
PBX55400
Short Fixed Pin
PBX85400
Short Fixed Pin, Handtight
SHROUDS
Code
Code
3079500050
Code
3079500112
3079500153
Filling Adapters CGA
CGA 540
Adapter Part Number
PBX55400 PBX85400
Description CGA 540 x CGA 540 Short Fixed Pin, wrench style CGA 540 x 1/4” NPT Short Fixed Pin, hand wheel style
Protective Shrouds Valve Part Number
Description
Shroud Part Number
Viproxy 1touch Analog CGA 540 MVA2UOS002 3079500112 Viproxy 1touch Analog CGA 540 MVA2UOS010 3079500050 Viproxy 1touch NEOS Digital CGA 540(*) 3079500153 MVA2EOS037 (*) Additional components and assembly tooling may be required.
Description Viproxy CGA 540 Green Top Handle Viproxy CGA 540 Green Dual Port Viproxy NEOS 540 Green
cavagnana.com
43
Factory Repair Center in Somerset, NJ
Cavagna offers complete service and repair for VIPROXY and IVIPR valves with integrated regulators. • • • •
Factory trained and certified technicians Complete diagnostic capabilities All repairs made using OEM component parts Warranty and non-warranty repairs offered to include: o o o o o o o o o o o o
• • •
Replacing protective guard Gauge replacement (analog or digital) Battery replacement Hose barb replacement Outlet cap replacement Inlet O-ring replacement Inner hand wheel replacement Hand wheel kit Control group replacement (digital VIPOXY only) Circuit board replacement (digital VIPROXY only) All factory repairs performed in an ISO class clean room Installation of new valves in customer owned cylinders
212 square foot cleanroom Two 24-hour HEPA filters Meets ISO 14644-1 requirements for ISO class 8 cleanroom
Contact our New Jersey office to arrange the return of items in need of repair. Parts and Labor pricing available upon request.
50 Napoleon Court Somerset, NJ 08873 732-469-2100 • Fax 732-469-3344 info@cavagna.com - www.cavagnana.com
44
cavagnana.com
Refrigerant Gases Valves Single Phase Diaphragm valve for inert Refrigerant Gas Dual Port Diaphragm valve for inert Refrigerant Gas Y valve for inert Refrigerant Gas Valve for inert Refrigerant Gas
46 47 48 50
cavagnana.com
45
Refrigerant Gases Valves
Single Phase Diaphragm valve for inert Refrigerant Gas Key Features: • Brass cylinder valve for refrigerant and cooling applications using halocarbons • Permanent gas tight seal • Spring Loaded PRV • Tube quick connection • Inlet thread dry sealant
7601900481
Options: • • • • • •
Liquid withdrawal tubes quick connection Anti-Filling – Rubber or Metal seal: - Removable - Unremovable - Breakable Colored plastic handwheel: red, blue Plastic inlet/outlet thread protection PRV plastic red cap Cartridge Spring Loaded PRV
Specifications: Test pressure
800 psi
Service temperatures
-40°F up to + 149°F
Seat orifice size
5/16”
Helium leak rate at Pmax
internal 4.3 10-3 atm.cc/s external 4.3 10-3 atm.cc/s
Material
Body: brass Handwheel: plastic Seat Pad: PA66 Diaphragm : stainless steel Withdrawal tube: PA
Inlet and outlet connections
Conforms to all requirements of : CGA V9 / CGA S - 1.1 / CGA V-1 / ISO 10297
7601900481
Example product details*: Valves
Inlet
Outlet
Colored Plastic Handwheel
Quick Tube Connection
7601900454
3/4”-14 NGT
CGA 660
Blue Vapor
Yes
7601900455
3/4”-14 NGT
CGA660
Red Liquid
Yes
* Here are some example codes that are intended for reference only, you may contact our sales department for further details.
46
cavagnana.com
Refrigerant Gases Valves
Double Port Diaphragm valve for inert Refrigerant Gas Key Features: • Brass cylinder valve for refrigerant and cooling applications using halocarbons • Permanent gas tight seal Listed according UL 1769 • • Spring Loaded PRV • Single or Double outlet • Tube quick connection • Inlet thread dry sealant
7601900187
Options: • • • • • •
Liquid withdrawal tubes quick connection Anti-Filling – Rubber or Metal seal: - Removable - Unremovable - Breakable Colored plastic handwheel: red, blue Plastic inlet/outlet thread protection PRV plastic red cap Cartridge Spring Loaded PRV
Specifications: Test pressure
800 psi
Service temperatures
-4°F up to +149°F
Seat orifice size
5/16”
Helium leak rate at Pmax
internal 4.3 10-3 atm.cc/s external 4.3 10-3 atm.cc/s
Material
Body: brass Handwheel: plastic Seat Pad: PA66 Diaphragm : stainless steel Withdrawal tube: PA
Inlet and outlet connections
Conforms to all requirements of : CGA V9 / CGA S - 1.1 / CGA V-1 / ISO 10297
7601900187
Example product details*: Valves
Inlet
Outlet 1
Outlet 2
Safety Devices
7601900169
3/4-14 NGT
CGA 660
CGA 660
PRV 600 PSI
7601900240
3/4”-14 NGT
CGA 660
CGA 660
PRV 600 PSI
7601900242
3/4”-14 NGT
CGA 660
CGA 660
PRV 600 PSI
7601900453
3/4”-14 NGT 7 Oversize
CGA 660
CGA 660
PRV 600 PSI
Colored Plastic Handwheel
Quick Tube Connection
Homologation
Yes
π
Yes Blue Vapor Red Liquid
Yes
Yes
* Here are some example codes that are intended for reference only, you may contact our sales department for further details.
cavagnana.com
47
Refrigerant Gases Valves
Y valve for inert Refrigerant Gas Key Features: • Brass cylinder valve for refrigerant and cooling applications using halocarbons • Double O-Ring valve operating mechanism • Permanent gas tight seal • Listed according UL 1769 • Spring Loaded PRV • Single or Double outlet • Tube quick connection • Inlet thread dry sealant
Options: • • • • • • • •
Liquid withdrawal tubes quick connection Anti-Filling – Rubber or metal seal : - Removable - Unremovable - Breakable Colored plastic handwheel: red, blue Plastic inlet/outlet thread protection PRV plastic red cap
Specifications: Test pressure
800 psi
Service temperatures
-40°F up to +149°F
Seat orifice size
5/32”
Helium leak rate at Pmax
internal 4.3 10-3 atm.cc/s external 4.3 10-3 atm.cc/s
Material
Body: brass Handwheel: plastic Seat: PA66 O-ring : CR Rubber Withdrawal tube: PA
Inlet and outlet connections
Conforms to all requirements of : CGA V9 / CGA S - 1.1 / CGA V-1 / ISO 10297
Example product details*: Valves
Inlet
Outlet 1
Outlet 2
Safety Devices
7601900224
3/4”-14 NGT
CGA 165
CGA 165
PRV 600 PSI
7601900257
3/4”-14 NGT
CGA 165
CGA 165
PRV 600 PSI
7601900445
3/4”-14 NGT
CGA 166
CGA 166
PRV 600 PSI
7601900446
3/4”-14 NGT
CGA 166
CGA 166
PRV 375 PSI
7601900467
3/4”-14 NGT (long thread)
CGA 165
CGA 165
PRV 600 PSI
Colored Plastic Handwheel Blue Liquid Red Vapor Red Liquid Blue Vapor Blue Liquid Red Vapor Blue Liquid Red Vapor Red Liquid Blue Vapor
Quick Tube Connection
Homologation
Yes Yes Yes Yes Yes
* Here are some example codes that are intended for reference only, you may contact our sales department for further details.
48
cavagnana.com
Refrigerant Gases Valves
Valve for inert Refrigerant Gas Key Features: • Brass cylinder valve for refrigerant and cooling applications using halocarbons • Permanent gas tight seal • Listed according UL 1769 • Cartridge Spring Loaded PRV • Single outlet • Tube quick connection • Pneumatic activated Anti-Filling rubber seal
7601900479
Options: • • • • • • • •
Cap nuts Liquid withdrawal tubes quick connection Colored plastic handwheel: red, blue Plastic inlet/outlet thread protection PRV plastic red cap Inlet thread dry sealant Inlet thread PTFE tape 7601900469 has CGA 165 outlet and for applications using HFO 1234YF
Specifications: Test pressure
800 psi
Service temperatures
-40°F up to +149°F
Seat orifice size
5/16”
Helium leak rate at Pmax
internal 4.3 10-3 atm.cc/s external 4.3 10-3 atm.cc/s
Material
Body: brass Handwheel: plastic Seat Pad: PA66 Diaphragm : stainless steel Withdrawal tube: PA
Inlet and outlet connections
Conforms to all requirements of : CGA V9 / CGA S - 1.1 / CGA V-1 / ISO 10297
Flow Capacity (CV)
0.54
7601900479
Example product details*: Outlet
Safety Devices
Colored Plastic Handwheel
7601900469 ¾ - 14 NGT
CGA 165
PRV 600 PSI
Blue Liquid - Red Vapor
Yes
and π
7601900470 ¾ - 14 NGT
CGA 166
PRV 600 PSI
Blue Liquid - Red Vapor
Yes
and π
7601900480 ¾ - 14 NGT
CGA 167
PRV 600 PSI
Blue Liquid - Red Vapor
Yes
and π
Valves
Inlet
Quick Tube Homologation Connection
* Here are some example codes that are intended for reference only, you may contact our sales department for further details.
cavagnana.com
49
Refrigerant Gases Valves
Connection for Outlet Valve CavagnaGroup® offers adapters for CGA 660 outlet connection.
Outlet Conncetion Valve
Connection Code Inlet Thread
Outlet Thread
Connection Material
1609500027 1.035-14 NGO-RH-INT
.4375-20 UNF-2A-RH-EXT
White Plastic + Rubber
CGA 165 1601100618 1.035-14 NGO-RH-INT 1.030-14 NGO RH EXT (CGA 660)
.4375-20 UNF-2A-RH-EXT
White Plastic
CGA 165 1609500036 1.035-14 NGO-RH-INT
1/2” 16 ACME-2G-RH-EXT
Blue Plastic + Rubber
CGA 167 1601100619 1.035-14 NGO-RH-INT
1/2” 16 ACME-2G-RH-EXT CGA 167
50
cavagnana.com
Blue Plastic
Refrigerant Gases Valves
Liquid Withdrawal tubes Quick Connection CavagnaGroup® offers a wide range of tubes and tools to complement its line of valves for refrigerant gas cylinders.
Specifications: • Ø available: Ø6, Ø8 and Ø10 • Length available: on request • Material available: PDVF
Quick connection
L
cavagnana.com
51
Tubes for Refrigerant Valves
Refrigerant Gases Valves
Quick Connection - External Diameter 10mm
De Di
18,5
A
B
Code
Material
Internal External Diameter Diameter Length “A” (“Di”) in mm in mm mm in
“De”
1201101719 1201101702 1201101581 1201101703 1201101745 1201101770 1201101788 1201101789 1201101816
52
PA6 PA6 PA6 PA6 PA6 PA11 PA6 PA6 PA66
cavagnana.com
10
0.39
8
10
0.39
8
10 10 10 10
0.39 0.39 0.39 0.39
10
10
10
0.39
0.39
0.39
8
8 8
8 8 8 8
0.31
280
0.31 0.31
363.5
0.31
1116
0.31
0.31 0.31 0.31 0.31
433.5
463.5
988.5 1212.3 410 1187
11 14.3 17.1 18.2 44 38.9 47.7 16.1 46.7
Assembled Length “B” mm in
261.5±2 345±2 415±2 445±2 1097.5±2 970±2 1193.8±3 391.5±3 1168.5±3
10.3 13.6 16.3 17.5 43.2 38.2 47 15.4 46
Refrigerant Gases Valves
Tubes for Refrigerant Valves
Quick Connection - External Diameter 8mm
De Di
18,5
A B
Code
Material
External Diameter “De” mm in
Internal Diameter (“Di”) mm in
1201101571 1201101669 1201101690 1201101680 1201101700 1201101658 1201101682 1201101659 1201101652 1201101657 1201101679 1201101660 1201101701 1201101689 1201101655 1201101724 1201101653 1201101646 1201101654 1201101587 1201101671 1201101656 1201101780 1201101781
PA6 RILSAN 11 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31 0.31
Length “A” mm
in
0.24 274.3 10.8 0.24 348.5 13.7 0.24 373.5 14.7 0.24 439 17.3 0.24 463.5 18.2 0.24 478.5 18.8 0.24 598.5 23.6 0.24 708.5 27.9 0.24 853.5 33.6 0.24 868.5 34.2 0.24 918.5 36.2 0.24 948.5 37.3 0.24 978.5 38.5 0.24 993.5 39.1 0.24 998.5 39.3 0.24 1078.5 42.5 0.24 1188.5 46.8 0.24 1218.5 48 1228.5 0.24 48.4 0.24 1258.5 49.5 0.24 1318.5 51.9 0.24 1378.5 54.3 0.24 388.5 15.3 0.24 488.5 19.2
Assembled Length “B” mm in 255±2 10 330±2 13 355±2 14 420.5±2 16.6 445±2 17.5 460±2 18.1 580±2 22.8 690±2 27.2 835±2 32.9 850±2 33.5 900±2 35.4 930±2 36.6 960±2 37.8 975±2 38.4 980±2 38.6 1060±2 41.7 1170±2 46.1 1200±2 47.2 1210±2 47.6 1240±2 48.8 1300±2 51.2 1360±2 53.5 370±3 14.6 470±3 18.5
cavagnana.com
53
Refrigerant Gases Valves
Tubes for Refrigerant Valves
Quick Connection - External Diameter 6mm
De Di 18,5
18,5
A
B
Code
Material
1201101570 1201101573 1201101564 1201101598 1201101562 1201101560 1201101672 1201101568 1201101563 1201101572 1201101596 1201101597 1201101565 1201101566 1201101661 1201101561 1201101640 1201101645 1201101704 1201101593 1201101665 1201101606 1201101567 1201101569 1201101664 1201101604 1201101668 1201101683 1209500237 1209500238 1209500239
54
PVDF (Kynar) PA6 PA6 PA6 PVDF (Kynar) PA6 PA6 PVDF (Kynar) PA6 PVDF (Kynar) PA6 PVDF (Kynar) PA6 PVDF (Kynar) PA6 PA6 PA6 PA6 PA6 PA6 PA6 PA6 PVDF (Kynar) PVDF (Kynar) PA6 PA6 PA6 PA6 PA12 PA12 PA12
cavagnana.com
B
External Diameter “De” mm in
Internal Diameter (“Di”) mm in
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24
Length “A” mm
in
Assembled Length “B” mm in
0.16 222 8.7 203±2 0.16 262 10.3 243±2 0.16 309 12.2 290±2 0.16 335 13.2 316±2 0.16 335 13.2 316±2 0.16 339 13.3 320±2 0.16 350 13.8 331±2 0.16 352 13.9 333±2 0.16 358 14.1 339±2 0.16 358 14.1 339±2 0.16 362 14.3 343±2 0.16 362 14.3 343±2 0.16 369 14.5 350±2 0.16 369 14.5 350±2 0.16 374 14.7 355±2 0.16 384 15.1 365±2 0.16 396 15.6 377±2 0.16 439 17.3 420±2 0.16 464 18.3 445±2 0.16 484 19.1 465±2 0.16 499 19.6 480±3 0.16 634 25 615±2 0.16 634 25 615±2 0.16 641 25.2 622±2 0.16 919 36.2 900±3 0.16 994 39.1 975±2 0.16 1084 42.7 1065±3 0.16 1229 48.4 1210±3 0.16 376.5 14.8 370±3 0.16 476.5 18.8 470±3 1.7 35.5±3 0.16 42
8 9.6 11.4 12.44 12.44 12.6 13.03 13.110 13.35 13.35 13.5 13.5 13.8 13.8 14 14.4 14.84 16.54 17.5 18.3 18.9 24.2 24.2 24.5 35.43 38.4 41.93 47.64 14.6 18.5 1.4
Table Of Outlet Connections For The Most Significant Gases
cavagnana.com
55
Outlet Connections Table
Table of outlet connections for the most significant gases UNITED STATES
Connection Type A
GAS
B
Chemical Symbol
COMPRESSED AIR
Dimensions
Standard
Type
.825” - 14 NGO TH EXT
CGA 346
B
NITROGEN
N2
.965” - 14 NGO RH INT
CGA 580
A
ARGON
Ar
.965” - 14 NGO RH INT
CGA 580
A
HELIUM
He
.965” - 14 NGO RH INT
CGA 580
A
HYDROGEN
H2
.825” - 14 NGO LH EXT
CGA 350
B
METHANE
CH4
.825” - 14 NGO LH EXT
CGA 350
B
CARBON MONOXIDE
CO
.825” - 14 NGO LH EXT
CGA 350
B
OXYGEN
O2
.903” - 14 NGO RH EXT
CGA 540
B
CARBON DIOXIDE
CO2
.825” - 14 NGO LH EXT
CGA 320
B
NITROUS OXIDE
N2O
.825” - 14 NGO LH EXT
CGA 326
B
ACETYLENE
C2H2
.885” - 14 NGO LH INT
CGA 510
A
AMMONIA
NH3
3/8” - 18 NGT RH INT
CGA 240
A
SULPHUR DIOXIDE
SO2
1.030” - 14 NGO RH EXT
CGA 660
B
PROPANE
C3H8
.885” - 14 NGO LH INT
CGA 510
A
BUTANE
C4H10
.885” - 14 NGO LH INT
CGA 510
A
CHLORINE
CI2
1.030” - 14 NGO RH EXT
CGA 660
B
ETHYLENE OXIDE
C2H4O
.885” - 14 NGO LH INT
CGA 510
A
PHOSGENE
COCI2
1/8” - 27 NGT RH INT
CGA 160
A
1.030” - 14 NGO RH EXT
CGA 660
B
REFRIGERANT
56
C
cavagnana.com
WARRANTY AND LIABILITY CONDITIONS (Valid for USA and Canada) 1 - Compliance of the brand new products The original seller of the brand new product (hereinafter referred to as Product) hereby warrants that the Product corresponds in quantity, quality, and type as specified in the sales contract (or, if missing, in the order’s confirmation) for the Product and that the Product is without defects that could render it unfit for the use to which it is intended. The original seller of the Product is identified on the invoice for the Product and is referred to herein as the “Warrantor.”
to apportion the costs. b) Communicate in writing the cancellation of the contract, and offering a refund of the amount paid for the replaced product No other cost (such as disassembling and/or reassembling of the products, transportation from/to the premises of buyer’s customers, etc.) shall be charged to or paid by the Warrantor, unless previously expressly agreed in writing by the Warrantor.
2 - Extent of the guarantee The warranty is limited only to defects in the design of, materials in or construction of the Product that can be attributed to the Warrantor. The warranty and does not apply in the case where the buyer is unable to prove correct storage and maintenance of the brand new products, or in the case the buyer has modified the Product without the prior written agreement of the Warrantor. Furthermore, the Warrantor is not liable for defects in the brand new product due to the normal wear and deterioration of those parts of the Product, which by their nature, are subject to rapid and continuous wear and tear (e.g.: lining, etc.). In general, in no case shall the Warrantor be liable for defects in compliance that arise after the transfer of risk or possession of the Product to the buyer has taken place. The warranty is valid only when the brand new product is are installed, used and maintained in conformity with the warnings and instructions provided by the Warrantor in the instruction manual or other Product literature and in conformity with the applicable laws, standards or regulations existing in the location where the brand new products are used or, in the absence of any applicable laws, standards or regulations, in conformity with the best practices in the applicable industry or trade.
In no event shall Warrantor be liable to buyer for any direct, incidental, indirect, consequential or exemplary damages, including without limitation any claim for damages based on lost revenues or profits, however caused.
3 - Claims The buyer is required to check the compliance of the brand new Products and confirm the absence of flaws. The buyer should report any flaws or defects in brand new Products, in the following ways and time. Failure to properly and timely report a defect will void the warranty: a) Claims for shortage or damages that could have been apparent from an examination of the exterior of the Product’s packaging contents must be reported as soon as the brand new Products arrives at their place of destination or, in any event, , no more than 5 days after that time. b) Claims relevant to quantity, colour, quality flaws or defects or non-compliance that the buyer should have been able to identify as soon as it took possession of the Product, must be made shortly after the time when the brand new Product arrives at its place of destination or, in any event, no more than 15 days after that time; c) Hidden flaws, defects or non-compliance (that is, those not identifiable according to the inspection imposed by law and by the preceding subparagraphs) must be reported within 30 days after the discovery or in any event, no more than 2 years from the delivery date. Claims must be sent by registered letter, addressed to the head office of the Warrantor and must describe in detail the alleged defect, flaw or non-compliance. In order to preserve this warranty, the buyer must not attempt any disassembly repairs or modifications on the brand new product without the Warrantor’s prior written agreement. The buyer forfeits and waives its rights under this warranty if the buyer does not consent to every reasonable request of the Warrantor, or if after the Warrantor has requested the return of the defective brand new products at buyer’s own expenses, the buyer fails to return the Product within 5 working days from the request. In the event that the warranty claim is ultimately determined, in the sole discretion of Warrantor, to be unfounded, the buyer will reimburse the Warrantor all expenses incurred by Warrantor in evaluating the warranty claim (travel, expert valuations, transport expenses etc.). 4 - Remedies Following a report by the buyer duly made in accordance with the previous point 3, the Warrantor, within a reasonable period depending on the type of claim, may, at Warrantor’s sole reasonable discretion: a) Supply EXW to the buyer products of the same kind and quantity as those that have been proved to be defective or not in compliance with the contract; in such a case the Warrantor can require the return of the defective product, which become property of the Warrantor. In case of additional costs related to the replacement of a product proved to be defective or not in compliance, Warrantor and buyer shall jointly and previously agree how
5 - Limit of seller’s liability The Warranty provided herein supersedes all legal warranty for defects and compliance, and excludes any other possible liability of the Warrantor, however originating, from the brand new products supplied by Warrantor. In particular, the buyer cannot put forward another claim for compensation in respect of any further damages, request any reduction of the contract price or cancellation of the contract. Once the period of the Warranty has expired no claim can be made against the Warrantor.
No exceptions to or modification of this Warranty will be permitted unless expressly and specifically defined and accepted by the parties in writing. 6 - Technical regulations As far as the brand new product characteristics and specifications are concerned, the Warrantor complies with the legislation and the technical regulations prevailing in Italy and the European Directives, unless otherwise specified in the contractual documentation (i.e. contract, order’s confirmation, or invoice); , The buyer assumes the risk of any difference between the European Directives plus the Italian regulations and those of the country of destination, use or installation of the Products, and indemnifies the Warrantor for any such differences it. The Warrantor guarantees the performance of brand new products of manufactured by Warrantor only and exclusively in relation to uses, destinations, applications, tolerances, capacities, etc… that have been expressly indicated by Warrantor and that are incorporated in the contractual 2documentation (i.e. contract, order’s confirmation, invoice). The buyer is not authorised to dispose of the brand new Products supplied to him by the Warrantor in a way which does not conform to the indications described in the previous sub-paragraph and in the instructions given by Warrantor. Where the buyer intends the said products to be resold, it shall be buyer’s responsibility: a) to inform the purchasers of the Product from buyer of the correct specifications and uses of the Product; b) to grant any further periods or extended terms of any warranty provided by buyer only to buyer’s purchasers that exceed the warranty granted to buyer by Warrantor according to paragraph c) the buyer shall not grant or extend any warranty on behalf of Warrantor to any third party. 7 - Personal injuries and property damages Warrantor shall indemnify buyer from and against any and all claims, demands, losses, liabilities alleged by third parties relating to personal injuries and property damages suffered as a result of a defective product. In such event, Warrantor will exclusively be responsible within the limits, terms and conditions of the product liability insurance policy held by it (a copy of the current policy is available upon request). In case of potential damages to third parties that may arise from a defective brand new product, the buyer and Warrantor shall work together in good faith to determine the nature and extent of the appropriate measures to be taken, including recall operations. It is understood that the costs and expenses associated with the recall or other measures shall be paid by Warrantor within the limits, the terms and the conditions set forth in Warrantor’s liability insurance policy, with the exclusion of the costs connected to the locating and retrieving the Products in the market, which will be paid by the Buyer.
Notes
58
www.cavagnagroup.com
Manufacturing Facilities ITALY
ITALY
ITALY
ITALY
ITALY
ITALY
ITALY
ITALY
METERING
ITALY
PORTUGAL
CHINA
Gazprom Gas Engine Systems LLC RUSSIA
VENEZUELA FRANCE INDIA
THAILAND
CHILE
Cavagna Group’s HP stocking locations Cavagna North America, Inc 50 Napoleon Court Somerset, NJ 08873 Phone: 001-732-4692100 Fax: 001-732-4693344 Email: info@cavagna.com
Distribution Center: Cavagna North America, Inc 5910 W By Northwest Blvd. Houston, TX 77040 Email: info@cavagna.com
Cavagna North America Distribution Center
50 Napoleon Court Somerset, NJ 08873 732-469-2100 • Fax 732-469-3344 5CA1429N - Rev. 6.5 ENG - 10/21
info@cavagna.com - www.cavagnana.com