Edition 2 | Winter 2012
Quarterly
See Inside: • Ground Thawing Basics - Pg 4-5 • Basic Concepts for Heating Enclosed Spaces - Pg 8-9 • Aerial Equipment Inspections - Pg 14-15 • Rent or Own? - Pg 20-21
Fargo, ND Permit No. 54
PAID
PRESORTED STANDARD US Postage
WINTER RENTAL EQUIPMENT HEADQUARTERS ve r e Res units r you W! NO
Blowers Generators Heaters Skid Steers Wheel Loaders
Great product selection is only part of the story. When the blizzard hits you need to have confidence your equipment is ready to run 24 hours a day. At Titan Rentals our rental fleet is full of late model machines that are maintained by our service professionals on a rigorous schedule to minimize downtime. While on rent, maintenance and repair support is handled quickly and efficiently thru our network of over 85 Titan Machinery locations across our footprint. You can count on Titan Rentals to have the right machines backed by the best product support in the market.
2
1-855-44-TITAN
The Titan Rentals business model is based on taking the strengths of a “rental house” and leveraging the parts and service support of a more traditional heavy equipment dealership to give you the best rental experience in the market. In 2011 we’ve added new staff at our Titan Rentals Stores experienced in the rent-to-rent business. They understand the rental business and are focused entirely on getting the equipment you need to your jobsite as quickly and efficiently as possible. One phone number – 1.855.44.Titan – connects you to the nearest Titan Rentals location. No matter where your jobsite is you will be routed to the nearest Titan Rentals location, staffed by professionals who understand the rental business and are there to get you the right equipment and keep it running.
Patrick Fisher
The Titan Rentals equipment fleet is monitored and maintained by our professionals in the service department. As a full-line dealer, Titan Machinery has the experienced support staff with Factory training, OEM parts, facilities and outboard service trucks to efficiently keep our fleet in peak operating condition. Machines are fully checked over before going to the field. Recommended maintenance schedules are followed and mechanical issues are dealt with proactively by professionals. VP Construction Division
The result is that you can expect to receive expert rental support backed by the most extensive dealer service/ parts network in the region with over 34 locations in 8 states – with parts, service professionals, service trucks and more. Our goal is to have the most well maintained rental fleet in our 8-state region, reducing your down-time and letting you get the job done on schedule. Give us a call for your rental needs for 2012. As always, thank you for your past business.
1-855-44-TITAN
3
Hydronic Heat
Problem: Ice in the soil!
THAWING Ice content of frozen soil
Frost facts:
Soil type
Gravel
Sand
Clay
Silt
Ice lbs / ft³
5 to 7
14 to 18
16 to 22
15 to 52
up to 1001
up to 2574
up to 3146
up to 7436
Soil does not freeze Water in soil freezes Ice binds soil Melting ice requires
143 Btu’s per pound!
Thaw time factors: Btu’s delivered per sq. ft. Hose spacing:
Btu's to melt ice
Thaw time in days* Frost Depth ft (m)
1 (0.3)
2 (0.6)
3 (0.9)
4 (1.2)
5 (1.5)
Closer = More Btu’s per sq. ft.
Hose Spacing in (cm)
18 12 (45) patterns (30)
18 (45)
12 (30)
18 (45)
12 (30)
18 (45)
12 (30)
18 (45)
12 (30)
More Btu’s = faster thaw
Sand
1.0
0.75
2.0
1.5
3.0
2.25
4.5
3.25
6.0
4.5
Gravel
1.0
0.75
2.5
2.0
4.0
3.0
6.0
4.5
8.0
6.0
Clay
1.75
1.25
3.5
2.5
5.5
4.0
8.0
6.0
11.0
8.5
Silt
2.0
1.5
4.5
3.5
7.0
5.5
10.5
7.5
14.0
10.0
Soil type & moisture content Insulation layers
*Performance will vary based on moisture level and insulation. Use IB 750 insulation blankets for optimum performance.
Ground Heater setup:
Heat transfer hoses
Vapor barrier
Insulating blankets
1. Prepare Site Scrape snow and ice from thaw site. 2. Position Heat Transfer Hose Place hose as directed by Ground Heaters’ thaw plan over thaw site area. A closed system, only heat goes into ground. 3. Lay Poly Vapor Barrier Containing water vapor improves thawing. • Prevents loss of heat • Keeps soil moist for better heat conduction • Keeps blankets clean 4. Place IB 750 Insulation Blankets Prevent heat loss and direct heat laterally and into ground. Requires 2 to 3 layers. IB 750 insulation blankets optimize thaw performance.
4
Hot soil Warm soil Frozen soil
Application determines hose spacing: Excavation
Hose spacing 18-24 in. (45-60 cm). Frost islands can be easily excavated.
Concrete
Hose spacing 12-18 in. (30-45 cm). Complete thaw without frost islands.
Accelerated Hose spacing 6-12 in. (15-30 cm). Fast, no frost islands between hoses.
1-855-44-TITAN
THAWING
Thaw method cost and time comparison
Cost: Traditional Method ft³ = $1.33 Time: 25 days
Cost: Ground Heater ft³ = $0.15 Time: 3 days
Only 15% of the heat is conducted into
94% of the heat is conducted into frozen ground!
frozen ground, 85% used to heat structure.
Cost to build enclosure Uneven curing, curling and chalking Noxious fumes with open flame hazzard Huge fuel bills
No enclosure to build with easy set up Uniform curing No open flame or noxious fumes Easy temperature control result in fuel cost less than $50 per day
Note: Figures above are based on average rates/costs. Actual rates/costs incurred may vary depending upon geographical location, soil conditions, etc. 6000 sq. ft. x 3' deep frost = 18,000 cu. ft.
Best thaw solution: Ground Heaters Speed
– Typically 1 foot deep/day – Delivers heat directly to thaw surface – Engineered for most Btu’s/square foot
Cost
– Uses fuel efficiently; fuel costs per cu. ft. thawed Ground Heater = $0.02 Traditional = $1.00
Ease
– No enclosures to build – Setup and operation are simple
Coverage – Up to 18,000 sq. ft./application Depth
– Up to 10 feet/application
Safety
– CSA certified in U.S. and Canada – US NHTSA and Transport Canada compliant
To ensure even heat distribution for thawing applications, use IB 750 insulation blankets, available from your Wacker Neuson distributor.
1-855-44-TITAN
5
Service Advantage The Titan Machinery network has the service and parts professionals to keep your fleet running in top shape. Our rental fleet is inspected and maintained on a strict schedule. When a problem does arise on the jobsite, our service department is trained and equipped to handle it quickly and get you running again. Trained, professional, local support backed by the largest network of construction locations in the Midwest – that’s the Titan Rentals service advantage.
34 Construction Locations Factory Trained Service Professionals
24-7 Support 6
1-855-44-TITAN
Titan Rentals has your Tundra
RT Series Heater In-Stock -- Reserve one before they are all gone!
3 Models Available
Re ser ON ve Tod E ay!
to Fit Your Needs: • Tundra RT 350 • Tundra RT 750 • Tundra RT 1400
350,000 BTU - 1,400,000 BTU 1750 - 5000 Cubic Feet/Minute
High-Output Flameless Heat
– The Next Generation of Mobile Heating Solutions Industrial mobile heating has never been so safe and efficient! Rotational Energy’s RT flame-free heater line offers a heating solution that is the safest, most efficient on the market today. Utilizing an engine load system, the RT heater provides high-output heating without the hassle of an open-flame. Only Rotational Energy offers heaters with a J1939 Can Bus electronics – which provides easy 3-touch start-up, fully automated operation, and complete safety system monitoring. With a full line of heaters ranging from 350k BTU to 1.4 million BTU, we have the right solution for your heating requirements. All RT heaters have a variety of options including ducting diameter and intake shut-down valves. In addition, all Rotational Energy RT units have 115% secondary fuel containment and are manufactured to both DOT and Transport Canada standards. No other heater on the market provides a safer, more fuel efficient portable industrial heating solution than the RT. Call or stop by your local Titan Rentals dealer today to reserve yours.
• High Heat Output • Efficient • Flameless Heat All models are made to withstand the most extreme arctic weather environments.
www.rotational-energy.com
1-855-44-TITAN
7
Basic Concepts for Heating Enclosed Spaces The winter season is a busy time of the year for Brent Majkrzak of Precision Equipment Manufacturing. “We take a lot of calls from customers and our dealers trying to size a heater for their specific project.” Precision manufactures a line of high-output flameless heating units that can put out between 350,000-1.4 million BTU/hour. The biggest factors in determining how much output is needed for a specific project include: • Volume of space needing to be heated • Amount of temperature rise needed • Leakage • How well insulated the space is • The time-frame needed to come up to the desired temperature “Generally speaking, a customer is going to need a lot more output on a job that requires a quick jump in temperature starting from a low base. Especially if the volume is large and the space is not well insulated. That’s just common sense. But other factors are involved including the relative humidity of the air and if the space includes a lot of “stuff” that is also cold. Take for example a heated shop. If you pull a 40,000lb dozer in that’s been sitting in -10 degree temperatures you are not only heating the air but you’ll need to heat the 40,000lbs of metal to room temperature. That takes a lot of energy,” explained Brent.
Energy Equations: Air: Ԛ = cfm * Cp * ΔT * ρ * 60 WATER: Ԛ = gpm * .1337 * Cp * ΔT * ρ * 60 Known’s Ԛ - Energy (Btu/hr) cfm - Fan Air Flow (cfm) Cp - Specific Heat (Btu/lb *F) = .24 for air / .87 for water glycol mix ΔT - Change in air temperature, Tout - Tin, (F) ρ - Density (lb/ft^3) = .072 for air / 66 for water/glycol mix 60 - Convert minutes to hours .1377 - Convert gpm to cfm AIR EXAMPLE: Air Flow = 2,000 cfm & ΔT = 100 F Ԛ = 2,000 * .24 * 100 * .072 * 60 = 207,360 Btu/hr Air Flow = 4,000 cfm & ΔT = 50 F Ԛ = 4,000 * .24 * 50 * .072 * 60 = 207,360 Btu/hr
8
Technically, a BTU (British Thermal Unit) is the energy it takes to heat one lb of water from 39 degrees F to 40 degrees F. It’s also equivalent to the energy it takes to heat 55 cubic ft of air by 1 degree F. You also have to account for heat loss thru the walls, windows, doors and the roof. A general rule of thumb is 75 BTUs/square foot just to maintain the desired temperature once it has been achieved but that can vary depending upon the height of the space and the amount of insulation and leakage, and the temperature of the outside air. “Normally we would suggest a heater in the 350,000 BTU range for 100,000 cubic feet of space, provided there are no “special” circumstances that would take extra draw,” said Brent. “But there again, it’s going to also depend on the temperature required, the temperature outside, how much heat loss is involved, and other variables.”
1-855-44-TITAN
Another thing you have to look out for is water vapor that is released with “direct fired units” such as propane or natural gas heaters. “Every 100,000 BTU of heat produced by a direct flame burning propane releases 8.21lbs of water vapor. With natural gas it’s 3.5lbs. This can be a big issue as many construction or oil field applications use millions of BTU/hour. If we use the example of a single RT1400 flameless heater, the equivalent propane direct flame heater would input 115lbs of water vapor into the project per hour. This causes all sorts of issues, including slow dry downs of drywall, spill cleanups, wash bays, etc. It can cause non-insulated buildings to freeze up as the water condenses,” explained Brent. Several useful websites for detailed explanations of heating concepts included in this article: http://www.tombling.com/heaters/heatloss.htm (calculating heat loss on structures) http://www.ehow.com/way_6148246_many-btus-heat-square-foot_.html (calculating the BTUs needed to heat a given volume of space) Electricity
BTU’s
1W
3.412
OIL
BTU’s
1 Gal #1 Fuel
136,000
1 Gal. #2 Fuel
138,500
1 Gal #3 Fuel
141,000
1 Gal. #5 Fuel
148,500
1 Gal. #6 Fuel
152,000
GAS
BTU’s
1 lb. of Butane
21,300
1 Gal. of Butane
102,600
1 Cu. Ft. of Butane
3,260
1 Cu. Ft. of Manufactured Gas
530
1 Cu. Ft. of Mixed Gas
850
1 Cu. Ft. of Natural Gas
1,075
1 lb. of Propane
21,600
1 Gal. of Propane
91,000
1 Cu. Ft. of Propane
2,570
1-855-44-TITAN
9
LET JLG DO THE HEAVY LIFTING
THROW SOME MUSCLE AROUND THE JOB SITE. Your day starts the minute you get in your telehandler cab. Which means your productivity is on the line. Lifting and accurately placing loads is your number one priority. JLG knows that. We live it. And with our telehandlers — providing capacities ranging from 5,000 to 12,000 lb and reach heights up to 55 ft — your day won’t seem so tough. Or your loads so heavy.
877-JLG-LIFT | www.jlg.com/jlg1
10
1-855-44-TITAN
Looking for a LIFT? Look NO Further Than Titan - The Midwest’s Largest JLG Dealer. Titan Rentals has a complete line of aerial equipment in stock.
Service | Parts | Rental | Sales
1-855-44-TITAN
11
BETTER RENTAL SOLUTIONS. From the Region’s Largest Construction Equipment Dealer Network.
Williston
MONTANA
15
Minot
Grand Forks Crookston
NORTH DAKOTA
Great Falls Missoula
Dickinson
MINNESOTA Duluth
Fargo Tractor Fargo
Bismarck
Mandan (Twin City Imp) Bozeman 90
Big Sky
Billings Titan Rentals Billings
Aberdeen (HC Clark Imp)
Aberdeen
Rogers
29
WISCONSIN Twin Cities 9
Gillette
WYOMING
Rapid City
Shakopee Rosemount Marshall
Pierre
SOUTH DAKOTA
Sioux Falls
Albert Lea
90
LaCrosse 9
Clear Lake
Casper 25
NEBRASKA
Sioux City Des Moines
80
Cheyenne
Kearney Lexington
Grand Island Lincoln
39
Center Point 80
Omaha
North Platte
39
Davenport
IOWA
Equipment Solutions: • • • • • • • • • • • • •
12
Aerial Air Compressors Attachments Concrete Equipment Cranes Earthmoving Equipment Generators Heaters Light Industrial Material Handling Mulchers Pumps Trucks
1-855-44-TITAN
RENTAL AREA MANAGERS
Nebraska
Omaha / Lincoln Steve Gosch
Office: 402.733.3700 Cell: 402.690.1191 steve.gosch@titanmachinery.com
North dakota Bismarck Dave Miller
Office: 701.250.7925 dave.miller@titanmachinery.com
Dickinson
Tyler Reisenauer Office: 701.227.5309 Cell: 701.590.3236 tyler.reisenauer@titanmachinery.com
Fargo
Chad Mulfinger Cell: 701.793.1128 Office: 701.237.3333 chad.mulfinger@titanmachinery.com
Fargo
Roger Nelson Cell: 701.388.4993 Office: 701.237.3333 roger.nelson@titanmachinery.com
Williston Bryan Ayers
Office: 701.577.0024 bryan.ayers@titanmachinery.com
South Dakota Sioux Falls / Sioux City Pat Hoffman
Office: 605.336.3434 Cell: 605.838.9295 pat.hoffman@titanmachinery.com
WYOMING Cheyenne Joe Taylor
Office: 307.638.4400 Cell: 307.275.0020 joe.taylor@titanmachinery.com
IOWA Center Point / Davenport Jim Thompson
Office: 319.849.3889 Cell: 319.213.3986 jim.thompson@titanmachinery.com
Davenport Ryan Wheeler
Office: 563.386.0400 Cell: 563.209.1490 ryan.wheeler@titanmachinery.com
Des Moines Adam Krichau
Office: 515.974.5100 Cell: 515.681.2114 adam.krichau@titanmachinery.com
minnesota Twin Cities Chad Johnson
Office: 763.428.5099 Cell: 763.276.8335 chad.johnson@titanmachinery.com
Montana Big Sky
Justin Carroll Office: 406.995.2229 Cell: 406.370.7740 justin.carroll@titanmachinery.com
Billings Rental Bob Blackford
Office: 406.656.7368 Cell: 406.671.0702 bob.blackford@titanmachinery.com
Bozeman
Ricy Anderson Office: 406.587.0728 Cell: 406.581.0932 ricy.anderson@titanmachinery.com
Missoula
Donald Hinricher Office: 406.543.7782 Cell: 406.327.6633 donald.hinricher@titanmachinery.com
Great Falls Jason Wright
Office: 406.453.1405. Cell: 406.750.4596 jason.wright@titanmachinery.com
1-855-44-TITAN
13
Aerial Equipment Inspections Staying Safe on the Jobsite
Aerial lifts can be found on a wide variety of jobsites and are very popular rental items. Whether owning or renting, it’s important that these units are properly maintained and inspected. The ANSI requirements are for a complete annual inspection of the lift “no later than 13 months from the date of the prior annual inspection”. “We treat the annual aerial inspections like we do an annual crane inspection,” says Jeff Feickert, Crane Customer Support Specialist. “We look at the whole machine, both visually and functionally. That includes everything from the frame welds to the warning decals and limit switches and alarms.” Jeff has been with Titan Machinery for nearly 20 years and has had a lot of experience with what to look for when inspecting aerial units. “We’ve done a lot of these over the years, along with our crane inspections. You see a lot of the same things yearin and year-out,” Jeff continued. The most common problems found on inspections are: •
Missing operators manual
•
Safety/warning stickers missing or illegible
•
Tilt alarm not working properly
ANSI requirements are for annual inspections to be made by a person qualified as a mechanic for that make or model thru either class work or experience. Some companies do their own inspections and others choose to use an outside vendor like Titan Machinery to do the inspections. The critical factor is having a knowledgeable person do the inspections. Once Jeff or one of his colleagues finishes an inspection he places a sticker on the machine certifying that it has been inspected along with the date and submits a written report to the owner of the lift detailing the findings from the inspection and what needs to be repaired, if anything, to safely function on the jobsite.
14
1-855-44-TITAN
“The sticker and the inspection report do not indicate that the machine passed inpsection,” warns Jeff. “It only indicates that an inspectin was performed and when it was done. It is the owner’s responsibility to see that defects are brought into compliance.” Annual inspections provide piece-of-mind that the machines are in good working order and are safe to operate. They are a great way of spotting problems before they lead to downtime or, even worse, an avoidable accident on the jobsite. Plus they are required by law. And in the event of an OSHA inspection or an accident, a good record of consistent, thorough inspections by a competent person gives you piece of mind that everything is being done to maintain a safe working environment and keep your downtime to a minimum.
Key Aerial Inspection Points • • • • • • • • • • •
Operators manual Frame/chassis welds Engine Electrical harnesses/functions Hydraulic hoses/motors/pumps Controls Pins Guards Safety/warning decals Steering Boom lifts: * Boom wear pads * Swing bearing * Swing brake • Cut-out switches • Aux power • Emergency lowering system
1-855-44-TITAN
15
concrete project
HEADQUARTERS • • • • • • • • •
Compact Track Loaders Concrete Buggies Ground Heaters Hammer Drills Lasers Plate Compactors Power Trowels Skid Steers Screeds
Co Eq ncre uip te for me n E Se very t aso n!
The concrete business is all about deadlines. You don’t have time for equipment that isn’t dependable. The rental professionals at Titan Rentals understand you are on a tight schedule. You’ll get prompt service and well-maintained equipment that you can count on to meet your deadlines. Whether you need a compact track loader or mini-wheel loader for site prep, or a concrete saw, screed or ground heater for finish work, Titan Rentals has the equipment you need to get the job done on-time.
16
1-855-44-TITAN
Better Rental Solutions from Wacker and Titan Rentals.
Wide Selection In-Stock • Concrete Vibrators
• Light Plants
• Generators
• Mini-Wheel Loaders
• Ground Heaters/ Thawers
• Power Trowels • Pumps
• Heaters
with Service & Parts support from the LARGEST Wacker dealer in North America.
Service | Parts | Rental | Sales
1-855-44-TITAN
17
Have Material to Move? Call Titan Rentals! • Backhoes
, e c i v er S k in c t i e u e Q t Fl s e New e Area, th ass l C ld Wor port! Sup
• Dozers • Excavators • Graders • Loaders • Scrapers • Skid Steers • Trucks
Titan Rentals has all your earthwork equipment needs covered. Our fleet of late model equipment is backed by the best parts and service support in the industry. Whether you need 1 unit for a weekend or 40 units for 2 seasons, our trained rental fleet experts will get you set-up with the solution that works best for your operation. Our rental support staff is trained to act quickly to find and supply the machines you need on your job site. Once it’s on site, Titan Rentals is there to keep you up and running with scheduled maintenance and emergency parts and service support.
18
1-855-44-TITAN
ATTACHMENTS FOR ANY JOB
•
Un Fit ivers -Up al • La te• M In Sto odel ck
GREAT SELECTION IN STOCK
1-855-44-TITAN
19
Rent or Own? There are several factors to consider when deciding whether to add a new machine to your fleet or to rent it. Often contractors find that from an economic standpoint, it’s more profitable to rent a piece of equipment than to own it. “One of the reasons that Titan has expanded the rental part of our business is because we recognize that in many cases it makes more sense for our customers to rent a piece of equipment than to purchase it,” explains Patrick Fisher, VP of Construction for Titan Machinery. “Our goal is to provide our customers with complete equipment solutions and part of that equation is having a strong rental presence. Combined with our regional footprint of fullservice construction equipment locations we can offer our customers a wide range of solutions including short-term or long-term rentals.”
When Can It Make More Sense to Rent?
Some of the factors that play a role in making a rental versus purchase decision are: • Availability – Sometimes it’s difficult to find the right machine in the time-frame needed in order to keep things moving at the jobsite. Rather than committing to purchasing a machine that’s not really what you want (but it’s the only one you can find in the time you have to look) it may be better to rent a unit to get thru the job and take the time to do a thorough analysis of what you may want to purchase long-term. • Utilization – Short-term equipment needs are often best met with rental equipment. A unit that is only needed for a short-term project isn’t likely to offer a very good pay-back of the capital that’s invested in it. This is especially true if it’s a special-application unit that rarely is needed for most of your jobs. • Variable Costs vs. Fixed Costs – Rental units are a variable cost that can be adjusted for demand. Once you’ve committed to a purchase, that equipment is either tying up capital or is costing you a monthly payment until it is paid-off. Those costs are fixed and remain whether you have a job or not. In the current economic climate it’s often beneficial to keep fixed costs as low as possible and conserve capital. • Cost of Maintenance – Owning equipment costs money, even when the unit is “paid for” by a job. As equipment ages repairs must be made. • Tax Considerations – Rental payments are typically expensed. Equipment purchases are depreciated over a period of time. Lately, with accelerated depreciation rules in effect, the tax implications of rental versus purchasing have been distorted towards purchases. Historically, equipment rental costs have been a legitimate tax management tool used to manage taxable income. Consult your tax professional for further clarification. • Balance Sheet – A strong balance sheet can have huge implications to bonding and the cost of borrowing capital. In most cases rentals do not appear on the balance sheet. In “slow” times, rentals can be returned. Reducing your “owned” fleet of equipment, especially in a soft market, can lead to substansial losses of capital. • Obsolescence – Machine technology is rapidly advancing. A unit that is 10 years old can be several generations behind in technology and may be far less efficient than a newer model even if it has low hours.
20
1-855-44-TITAN
Ownership Rewards?
There are many reasons to own the equipment you operate. Many contractors own a core fleet of equipment which is normally enough to meet their typical work-load. When the workload increases they can either run the equipment they own even harder, purchase more equipment or rent. Often contractors will choose to own equipment that they believe will be well utilized. The tax rules allowing accelerated depreciation in effect over the last few years has made it more economically feasible to purchase equipment for contractors with a strong balance sheet and a steady pipeline of work. You also have 100% control of the availability of your own fleet, although that’s subject to the constraints of break-downs, competing needs, and transportation. And some owners just prefer to own most of the equipment they run. In climates where the work typically slows up during the winter, some owners prefer to keep key employees on the payroll doing maintenance for their fleet and/or snow removal during the “off season”.
Do What’s Right For Your Situation In the end, there are trade-offs to be made whether you rent or own a machine. The trend over the last few years has been a stronger reliance on rental equipment due to the challenging economic situation in the construction field. Many customers are placing a larger emphasis on maintaining a strong Balance Sheet and liquidity to combat the economic uncertainty. “Titan Machinery is committed to being a 1-stop shop for our construction equipment customers,” said Fisher. “Our customers need flexibility in today’s demanding economic environment. We’re geared-up to provide the best new, used and rental equipment solutions on the market. We believe that Titan Rentals offers unique value to our customers by combining an experienced rental staff with the service and parts support of a full-line construction equipment dealership network.”
1-855-44-TITAN
21
SPECIALTY EQUIPMENT
• Aggregate Equipment • Cranes • Haul Trucks
• Long Reach Excavators • Machine Control - Lasers • Mulchers
22
1-855-44-TITAN
The Rental Market Source
The Rental Market Source
With world-leading products for the rental market, Atlas Copco Construction Equipment is the equipment of choice for: Portable compressors – oil-injected rotary screw technology Portable generators – 500-hour service intervals, no-spill sealed frame • Handheld construction and demolition tools - pneumatic and hydraulic powered • Hydraulic attachments – for carriers ranging from 1 ton to 120 ton • •
With world-leading products for thefor rental market,customer Atlas Copco Construction Equipment Delivering sustainable solutions increased productivity is the equipment of choice for: through innovative products and services. Portable compressors – oil-injected rotary screw technology Portable generators – 500-hour service intervals, no-spill sealed frame Handheld construction and demolition tools - pneumatic and hydraulic powered • Hydraulic attachments – for carriers ranging from 1 ton to 120 ton • • •
Atlas Copco Construction Equipment Delivering sustainable solutions for increased customer productivity Tel. 800-732-6762 through innovative products and services. www.atlascopco.us
Atlas Copco Construction Equipment Tel. 800-732-6762 www.atlascopco.us
your exclusive source for
1-855-44-TITAN
23
Delivering Better Rental Solutions. Experienced Rental Professionals Your calls will be handled by trained, experienced rental professionals.
One Number to Call Just call 1.855.44.Titan and your call will be routed to the nearest Titan Rentals location.
Professional, Local Service/Parts Support Our fleet is managed by a professional service and parts team. Scheduled preventative maintenance keeps our units in top working condition. In field service and emergency repairs are handled by fully equipped Factory-trained technicians.
1.855.44TITAN