Issuu

SPECIAL INSERT: 2019 Industry Calendar

MANAGING THE UNMANAGEABLE

Lane Parry Forestry Consulting, Baker City, OR

IDAHO MILL GETS HIGH-TECH MAKEOVER LUMBERJACK CHAMPION

Northwest’s Erin LaVoie

TETHERED PERFORMANCE PONSSE EIGHT-WHEEL HARVESTERS can be used for harvesting wood from slopes where mechanized harvesting was previously unprofitable, even impossible. The agility and ease of use of the crane and the stability provided by the eight wheels increase productivity considerably. The machine’s center of gravity remains low when operating the longer reach of the crane, driving comfort is better, and there is no need to sacrifice the power of the machine. PONSSE SYNCHROWINCH enables harvesting on extreme steep slopes. The winch is synchronized with the machine’s driving speed, and does not require any special actions while operating. Tethered PONSSE harvesters and forwarders provide unbeatable productivity with minimal ground disturbance even in the most demanding conditions.

Jouni Viitikka

Sean Vann

Pacific Northwest Sales 541-554-6358

Rocky Mtn & US Southwest Sales 406-270-5139

A logger’s best friend www.ponsse.com

ON THE COVER

November/December 2018 Vol. 43 No. 11-12

This photo of a Tigercat LS855E Leveling Shovel Logger was taken this September during the Pacific Logging Congress 2018 Live In-Woods Show.

Idaho Mill Gets High-tech Makeover

Idaho Mill Gets High-Tech Makeover

The Idaho sawmill of Woodgrain Millwork is on the upswing

Managing the Unmanageable

A Look at a Lumberjack Champion

Redwood Region Resource Rally

Firebreak Column — Paradise Lost

Lane Parry consults with federal and private landowners Behind the scenes with Northwest champion Erin LaVoie

Rally recruits and engages the next generation of natural resource professionals The mega California fires and the fallout

Managing the Unmanageable

A Look at the Lumberjack Champion

Guest Column

Cutting edge technology defining tomorrow

Redwood Region Resource Rally

DEPARTMENTS

Page 4................................................................ In the News Page 30...................................................Association News Page 36.......................................................Machinery Row Page 42..........................................................New Products Page 45..............Advertiser’s Index/Classified Section Page 45......................Calendar of Events/Subscription

www.forestnet.com November/December 2018 TimberWest

Supreme Court Rules Critical Habitat to Be “Habitat”

AFRC reported that on November 27, in a unanimous 8-0 opinion authored by Chief Justice Roberts, the Supreme Court reversed a decision upholding the designation of timberland in Louisiana as unoccupied “critical habitat” for the dusky gopher frog. The economic impact of the designation was substantial, limiting the development options in a rapidly growing area of Louisiana and lowering the land value by over $30 million. This landmark decision will likely allow further challenges of critical habitat designations, particularly where the designation is in unoccupied area or would cause significant economic harm.

Fires and Farm Bill

On a sobering note, analysis from the U.S. Geological Survey states that forest fires in California this year released carbon emissions equivalent to the amount produced by powering the state’s electricity for one year.

“We know that wildfires can be deadly and cost billions of dollars, but this analysis from the U.S. Geological Survey also shows just how bad catastrophic fires are for the environment and for the public’s health,” said Interior Secretary Ryan Zinke. On November 29, Farm Bill negotiators announced that they had reached agreement, but the bill will not be released until it is scored by the Congressional Budget Office. The bill is not expected to include significant new forest management provisions.

Seeking SRS Funding

The Curry Coastal Pilot reported that both Oregon Sen. Ron Wyden and Idaho Sen. Mike Crappo have called for their colleagues to extend the Secure Rural Schools and Community Self-Determination Act for at least one year in its year-end funding measures. “Congress has an obligation to ensure that counties can adequately provide essential services for their residents,” the senators’ letter reads. “Without the certainty of these critical safety-net payments, schools, libraries, and jails are closing. Schools that remain open will see a reduction of teachers. Roads go unpaved and become unsafe. Mental and physical health services are scaled back or even ended. Fewer and fewer law enforcement officers are 4

forced to patrol larger and larger areas.” SRS funding, they said, has been critical for more than 775 counties in 40 states. The letter is also signed by senators from Idaho, Oregon, Wisconsin, Colorado, New Jersey, Arkansas, Washington, West Virginia, Montana, California, New Hampshire, New Mexico, Minnesota, Michigan, South Dakota, New Hampshire, Alaska, and Mississippi.

Humboldt State University Study Shows Promising Results for Biochar

After a years-long, $5.88 million biomass study entitled Waste to Wisdom, researchers at Humboldt State University (HSU) show that biochar production for use as a soil amendment provides more near-term promise than conversion of forest waste into biomass energy products. The team worked on developing three different products from forest residues: briquettes, torrefaction, and biochar. Schatz Energy Research Center Director and project co-lead Arne Jacobson said biochar seemed the most promising to become a marketable product. Jacobson said there is already interest in the results from Waste to Wisdom, including from Northern California timber companies, and the state of California is interested in biochar from the perspective of forest fire management. For more information on the project, visit www.wastetowisdom.com.

Freres Makes Final Shipment to OSU

Freres Lumber Company announced the final shipment of its new, patented Mass Plywood Panel (MPP) to Oregon State University (OSU) for use in the construction of the new A.A. “Red” Emmerson Advanced Wood Products Laboratory (AWP). MPP is being used for both interior and exterior walls of the AWP as well as roofing in the George W. Peavy Forest Science Center. The two buildings, which form the Oregon Forest Science Center, are incorporating innovative uses of advanced wood products made in Oregon. Freres Lumber’s MPP is a new entrant in the mass timber market. It is the first and only mass timber panel constructed entirely out of Structural Composite Lumber (SCL), which means it uses 20 to 30 percent less wood, costs less, and is as strong or stronger and lighter weight than lumber-based CrossLaminated Timbers (CLTs). MPP also supports ecofriendly building practices without compromising stability, produces fewer CO2 emissions than other building materials, and is renewable, unlike concrete and steel. TW

TimberWest November/December 2018 www.forestnet.com

Editor: Diane Mettler, diane@forestnet.com Copy Editor: Beth Szyperski Contributing Editors: Mary Bullwinkel, Barbara Coyner, Lindsay R. Mohlere, Jack Petree ––––––––––––––––––––––––––––––––––––––– Sales Mgr: James Booth – jbooth@forestnet.com Phone: (604) 506-8631 Director: Rob Stanhope – stanhope@forestnet.com Assoc. Publisher: Anthony Robinson –robinson@forestnet.com Sales Contact Information: Phone: (604) 990-9970 • Fax: (604) 990-9971 ––––––––––––––––––––––––––––––––––––––– Publisher & Production Manager: Sheila Ringdahl – sringdahl@forestnet.com Accounting Manager: Shelina Jessa – accounting@forestnet.com Corporate Office Information: Phone: (425) 778-3388 Fax: (425) 771-3623 timberwest@forestnet.com www.forestnet.com Send all materials - Insertion Orders, Contracts, Copy, Photos, Disks to: TImberWest Publications, LLC P.O. Box 610 (300 Admiral Way, Suite 105) Edmonds, WA 98020-0610 ––––––––––––––––––––––––––––––––––––––– Send both OLD and NEW Circulation information to: TimberWest Magazine Attn: Subscriptions P.O. Box 610, Edmonds, WA 98020 Fax: (425) 771-3623 • subscribetw@forestnet.com ––––––––––––––––––––––––––––––––––––––– Advertising created by TimberWest Publications, LLC is the sole property of TimberWest Publications, LLC and may not be copied or reproduced without the express written permission of the publisher. PUBLISHER’S EDITORIAL STATEMENT: TimberWest reports on the logging and lumber segment of the forest industry in the Western United States with emphasis on the states of AK, WA, OR, ID, MT and CA, providing current information on timber harvesting techniques, sawmill operations, news, legislation, events, people and products pertinent to this market. TIMBERWEST (USPS #024858) is published bi-monthly (Jan/Feb, Mar/Apr, May/Jun, Jul/Aug, Sept/Oct, Nov/Dec) by TimberWest Publications, LLC, 300 Admiral Way, Suite 105, Edmonds, WA, 98020. Periodicals postage paid at Edmonds, WA and at additional mailing offices. Copyright 2018. All rights reserved. Subscription rates to qualified subscribers are Free and all non-qualified subscriptions in U.S. are $22 per year payable in advance. Canada $35 (U.S.). Other $40 (U.S.). Single copies paid in advance $4. Company affiliation, title, date and signature must appear on subscription forms. Publisher reserves the right to refuse non-industry subscriptions and advertising. All other advertising is accepted at the discretion of the publisher. Publisher does not assume any responsibility for the contents of any advertisement and all representations or warranties made in such advertising are those of the advertiser and not of the publisher. Back issues, if available, $4 each. Directory and Calendar issue $10 each. Canadian Publication Mail Product Sales Agreement #40740074. Return Undeliverable Canadian Addresses to P.O. Box 86670 Stn. Main, North Vancouver, BC V7L 4L2 Printed in Canada at Horseshoe Press Inc. POSTMASTER: Please send address changes to TimberWest, P.O. Box 610, Edmonds, WA, 98020-0610

MillProfile

Idaho Mill Gets High-tech Makeover The Idaho sawmill of Woodgrain Millwork is definitely on the upswing

The new sawmill at Emmett, Idaho, stands out as Woodgrain Millwork’s first primary breakdown facility since its earlier days in Utah in the 1950s. 6

TimberWest November/December 2018 www.forestnet.com

MillProfile By Barbara Coyner

any thought the final ep-

itaph had been written for the historic sawmill site in Emmett, Idaho, when the Boise Cascade sawmill closed in 2011. A string of new owners came and went after that — but uncertainty seems to be in the rear-view mirror these days since Woodgrain Millwork purchased the site in 2016. Eager to outfit the dormant facility with a major high-tech makeover, the mill is now up and running the latest in sawmill equipment, indicating that the new owners see an optimistic future in southern Idaho. “It’s been quite a journey over the last couple of years,” says Emmett Woodgrain mill manager Bob Shaw, a hometown boy who began his wood products career at the old Boise Cascade mill. When Boise Cascade left town, Shaw moved over to Woodgrain, managing the company’s door plant at nearby Nampa, before being tapped for the manager slot at Emmett. The home office for Woodgrain Millworks is just miles away in Fruitland, with other manufacturing plants across the U.S. and in Chile. The company churns out doors, mouldings, and some 60 other secondary wood products, with Home Depot featuring Woodgrain as its largest moulding supplier.

between cost, efficiency, and reliability. They need usable technology that enhances their sawmill’s productivity without unnecessarily adding to its complexity.” For Delicaet, the Emmett facility is all about practical innovation, with HewSaw pulling together a tried-and-true group of equipment suppliers that has fine-tuned its team after years of working together. He touts the whole installation as a turnkey approach, reducing risks to the owners. “We tend to see ourselves more as partners than suppliers,” he adds.

Installing ProLogic+

The basic needs of the new small log side were met with the flexibility of the HewSaw itself, allowing Woodgrain to mill Ponderosa pine, Douglas fir, and white fir, always being nimble to changing markets and manufacturing needs. For example, the saw’s chipper canter can maneuver to take five boards off the cant, then turn 90 degrees to re-scan, sending the products on to the bull edger, again maximizing every log for full value. (continued on page 8)

New HewSaw

The new sawmill at Emmett stands out as the company’s first primary breakdown facility since its earlier days in Utah in the 1950s. Rattling off a long list of mill upgrades and improvements, Shaw notes that the new HewSaw SL250 2.2 multi-side breakdown line is the star of the show, now handling up to 16-foot logs compared to the past 12-foot log length. The mill’s older large log side has seen some upgrades, as well, but the small log side is all new. “We’ve changed the layout of the mill drastically and improved the flow,” he points out. “We looked over where we could change things for better efficiency. It’s not up to full production yet, but we’re getting close.” The choice of HewSaw evolved after Woodgrain researched equipment and booked a trip to Finland. “We liked the logsto-lumber line,” Shaw says of the HewSaw. “One pass and you’re done. We’re still not up to full volume and are at 1,500 logs per shift. But we hope to be up to 2,000 logs per shift before too long.” “Independent sawmillers are our main customers,” explains Bruce Delicaet, general manager of HewSaw U.S. “These customers rely on us to find the right balance

The new HewSaw SL250 2.2 multi-side breakdown line is the star of the show, now handling up to 16-foot logs compared to the past 12-foot log length.

www.forestnet.com November/December 2018 TimberWest

MillProfile (continued from page 7) The high-tech wizardry is augmented by ProLogic+, using LMI scanner heads, to fine tune the scanning and optimizing capabilities. In this instance, Woodgrain opted to install two scanning zones, one at primary breakdown and one prior to the bull edger.

Choosing Bosch Rexroth

Bosch Rexroth came in with sophisticated Sytronix hydraulic drives, and as Bosch’s Rodney Trail notes, “It’s the most advanced system we’ve done to date for HewSaw.”

PROLOGIC+ is providing solutions to sawmill industry

Our new ProLogScanner ® 9550, 10 th Avenue, Saint-Georges (QC) G5Y 8J8, Canada

T. +1 418 227-4303 F. +1 418 227-4400

soon to be approved and certified by Measurement Canada

sales@prologicplus.com

prologicplus.com

Bosch Rexroth came in with sophisticated Sytronix hydraulic drives, and as Bosch’s Rodney Trail notes, “It’s the most advanced system we’ve done to date for HewSaw. This machine is so advanced that it has a mind of its own, so the information going back and forth is really mind blowing. The HPU can actually tell the operator what’s wrong with itself. It is very intelligent.” Trail defines the hydraulics as the heartbeat of the system. “Hydraulics get the tools in position fast, and they have to be reliable. It’s all done with hydraulics and if the hydraulics stop, it all stops. Motioning pulls it all together. It’s how a machine motions. That’s where it all starts.” While Trail can give a good primer on the importance of hydraulics, he’s more enthused to talk about the forward thinking that has come into the field. He’s especially impressed with the freedom he and others had in designing the system for Woodgrain. “The owners were open to all forward thinking, and they really took advantage of that forward thinking, which will save them buckets full of energy,” says Trail. “That HPU is so smart in terms of positioning of tools, and positioning of controls and flow. It is excellent because of pressure control and the whole positioning loop. There is more velocity and more gap control. There is so much accuracy. It’s just a finely tuned ballet.” And that ballet, it turns out, is designed to operate with far less power being pulled from the power grid. The savings in energy costs for Woodgrain will be substantial. “The Emmett system is the most advanced Smart System we’ve produced,” Trail says. “It was a joy to build, and it’s the crown jewel for us.”

High Marks in Technology

With “Industry 4.0” the new measuring stick for manufacturing perfection these days, Trail feels the Emmett facility definitely earns high marks. Citing the fact that humans, machines, sensors, and devices all connect and communicate with one another, Trail notes that the automated systems also create a data history, putting that data in context. There is the symbiotic relationship (continued on page 10)

TimberWest November/December 2018 www.forestnet.com

GROUND UP

PURPOSE-BUILT FROM THE

GET THE DETAILS ON WHY YOUR NEXT LOG HANDLING MACHINE SHOULD BE A SENNEBOGEN

Only SENNEBOGEN

log loaders are purpose-built one machine at a time to meet your goals.

Stack higher • Move faster • Work safer Think of the possibilities! See how SENNEBOGEN can purpose-build the right machine for you at

www.sennebogen-na.com/forestry www.sennebogen-na.com | +1-704-347-4910

• Diesel and electric-drive machines from 44,000 to 750,000 lbs. • Full range of rubber tired, tracked and stationary models with customized boom & stick configurations.

MillProfile (continued from page 8)

between machines and people, as well, with machines taking on tasks too difficult or unsafe for humans. Ultimately, the machines are also capable of functioning in an autonomous manner in more routine situations. Another advantage of this technology is that it allows mill staff to call upon the expertise of off-site specialists for technical assistance any time of the day. Here Delicaet weighs in on the importance of having smart technology that allows troubleshooting from afar. An equipment expert from Canada might be working in collaboration with a European specialist to help identify and correct an issue with a system located in Idaho, thanks to the commonality of supply and the worldwide cyber highways. “We deliver an integrated package that is tried and true,” says Delicaet. “Our belief is this level of technology is not only functional but helps to mitigate the customer’s overall risk during the life of the sawline. Our customers don’t need added risk — they have enough without their suppliers adding to it,” Delicaet emphasizes.

Signode Industrial Group Strapping System

Placing the new Emmett mill in the bigger context for Woodgrain, there’s much to be said for having the primary breakdown facility just miles from other processing plants at Nampa and Fruitland. Because the boards from Emmett are destined to become appearance-based products, they need careful handling and packaging. Here Woodgrain looked to the Signode Industrial Group. “The company’s BPX strapping system really caught Woodgrain’s eye, with its top edge protectors, independent side compression units, and other features promising efficient and protective packaging and shipping,” says Dave Rentz, Signode Equipment Project Manager. Additionally, the strapping equipment features easy-to-use modules, making the changing of strapping heads much simpler and eliminating the need for fork trucks or cranes. Signode furnished training for the fully automatic system, including equipment maintenance training.

Human Safety Vital

Meanwhile, as technology fine tunes in the sawmill, it definitely has its strong points for Bob Shaw, who cut his teeth on sawmilling in an entirely different era. He has seen the human labor associated with the old green chain and other manual chores, and the eventual upgrades to scanners and computerization. In the new Emmett system, he really sees the advantages in speed, accuracy, and 10

TimberWest November/December 2018 www.forestnet.com

MillProfile efficiency, but human safety is one of the biggest selling points to the new technology. “Woodgrain doesn’t just look at safety as a priority, it’s a corporate value,” he says. “Priorities change, values do not. We want to make this mill as much hands-off as possible. For example, we have fences around the mill, and if a gate opens, the mill shuts off.”

Economic Driver

Beyond the safety of his current 50 employees, Shaw is tasked with finding the new wave of mill workers, the ones who embrace technology and are tech savvy. “It’s one of my biggest challenges, finding the right people. We held over some of the old employees, but this is knowledge work, not the old style labor work. We have to have some training for the new ways of doing things.” For Shaw, the look backward to the old heyday of sawmilling in the region has been replaced with an excitement about Emmett’s and Woodgrain’s future. “The owners, I believe, have built something special here. It’s good for the employees, it’s good for the customers, and it’s good for the community. The equipment and technology are so amazing. “For a while, I have been focused on the

The new technology brings not only speed, accuracy and efficiency, but also — and mostly importantly — a new level of safety. short term, but now in the long term, I’d like to see us become the preferred employer and an economic driver around here. It’s been said that in the wood products industry, every dollar turns over seven times. The grocery store, the drug store, the hair dressers,

and gas stations, everybody gets a piece of that dollar. I’d like to think this will help with a community revival as new businesses come in and there is new life in town.” TW

BAR WORKS LTD.

“The Best Bar - Bar None!” MANUFACTURING A FULL LINE OF 3/4” AND .404” PITCH HARVESTER BARS

Congratulations, Woodgrain Millwork, on your start-up!

INDIVIDUALLY MADE | TRUSTED QUALITY | LARGE SELECTION

GUIDE BARS FOR PROFESSIONALS Mechanical Harvesting Bundle Cutting Falling and Bucking

made in canada for the toughest conditions

Chainsaw Milling Tree Service Carving and Sculpting

1-888-604-9990

www.cannonbar.com | info@cannonbar.com

www.forestnet.com November/December 2018 TimberWest

MADE FOR MORE

You begin each day before dawn with a drive and determination to do more than the day before. When you move at this pace, you know to do more you need equipment that is made for more. That’s why our forestry equipment, like our 50/48X Whole Tree Drum Chipper, is built from the ground up to meet your needs, delivering: More Power and Production Consistent, Quality End Product Lower Operating Costs Ease of Maintenance Greater Longevity and Resale Value

If you’re ready to operate equipment that’s made to keep pace with you, then we invite you to contact the authorized dealer in your area listed to the right or go to morbarkdealers.com to find your local authorized dealer. Your Morbark dealer will work with you to assess your needs now and in the future, as well as offer equipment recommendations, financing options, wear parts and service if you should ever need it.

Ponsse B Martin Tim

TO KEEP PACE WITH YOU

Morbark Authorized Dealer Network DDI Equipment 1 Location serving AZ www.ddiequip.com Equipment Sales & Service Ltd. 1 Location serving Alberta, Canada www.essltd.com Great West

Locations serving Buffalo 11 forwarder does doubleBritish duty for Columbia, Canada mber Harvesting loading logging truck. www.gwequipment.com

Papé Machinery 27 Locations serving CA, ID, OR, WA and Western NV www.papemachinery.com

Power Motive Corporation 5 Locations serving CO and Southeast WY www.powermotivecorp.com

ConsultantProfile

Managing the Unmanageable Lane Parry Forestry Consulting, Baker City, Oregon By Lindsay R. Mohlere

n the afternoon of August 10, 2015, Lane Parry, president of Lane Parry Forestry Consulting of Baker City, Oregon, was visiting one of his contracted logging crews working a thinning project on the north side of Little Baldy Mountain, when he noticed smoke on the south side of the mountain. At first, he didn’t think too much of it. A dry lightning storm had moved through overnight, and there had been several lightning strikes in the area — he knew fire crews were nearby.

Part of the 20-man crew reforesting the Cornet/Windy Ridge fire. Crews plant an average of 1,200 trees per day. 14

TimberWest November/December 2018 www.forestnet.com

Planter bag loaded with Larch saplings.

ConsultantProfile

“I putted around for a while looking at their job, checking the job, and the smoke was looking bigger,” Lane said. “I ended up going up on the ridge for a better look, thinking that it wasn’t that bad. About ten minutes later, the wind kicked up. I was like, ‘Oh! Yeah! It’s coming fast.’” Lane then alerted the logging crew, and the race was on to get men and machines to a safe place as the fire devoured acres at about 20 miles per hour. What Lane had observed was the beginning of the Cornet Fire, which eventually joined with the Windy Ridge Fire to become what is known as the Cornet/ Windy Ridge Fire. It devastated over 100,000 acres of private and public range and forest land in eastern Oregon, until it was contained in October of that year. Little did he know that he would soon be contracted to manage the salvage and reforestation operation after the fire was out. It was a difficult undertaking, with many moving parts, including the fact that Lane had never done a salvage job of this The hoedad — an essential tool for planting seedlings during the reforestation process.

scale before and had little reforestation work under his belt. However, he was able to put all the pieces together. For his efforts and management of the project, Lane was awarded the Eastern Oregon Operator of the Year Award for 2017.

Tackling a Unique Challenge

Along with federal lands, the fire impacted 14 different landowners, including several of Lane’s consulting clients. One of the biggest challenges to salvage logging in Oregon is the fact that if you salvage log, you are also responsible for reforestation. Large, corporate landowners know this and are accustomed to it. In the case of smaller, private landowners, it’s a whole other story. Most of the private landowners had no experience with salvage logging or reforestation, nor contracting with logging outfits or tree selection. Before one tree was cut, Lane took the extra effort and educated the landowners about the reforestation issue. Another challenge was mitigating the financial risk involved with the project. “We were a depressed timber market salvage logging low-value pine. So you’re (continued on page 16)

www.forestnet.com November/December 2018 TimberWest

ConsultantProfile

Left to right: Lane Parry, Geoff Phillips and Dustin Hull. (continued from page 15) looking at landowners netting about $250 per acre. Reforestation costs $300 an acre,” Lane said. The first thing Lane did was contact the Farm Services Agency to see if they had any disaster recovery grants. Fortunately, they did. The grants are designed to cover 75 percent of disaster recovery costs. “We got 75 percent of the planting costs covered, and then we started to salvage log. Didn’t take very long to get an answer. The fire was

still smoking by the time we heard from them,” Lane explained.

Securing Seedlings

The final hurdle was securing the seedlings necessary to reforest the burn, but because clear cutting is rare in eastern Oregon, an adequate supply of seedlings was not available. Lane sought the help of Private Lands Forest Network, nonprofit group in La Grande, Oregon. “They’re usually here for non-industrial private ground with, maybe, 20,000 trees.

TimberWest November/December 2018 www.forestnet.com

All of a sudden, we had a need for 400,000 seedlings,” Lane said. “Luckily, they knew what to do. The first year, spring of 2016, we could only round up 24,000 trees. But thanks to the efforts of Jamie Knight at Private Lands Forest Network, who got to working with nurseries, got them sowing a lot of seeds, last year we had 210,000. This year, to finish it up, we got over 110,000 seedlings,” Lane added. Prior to taking on the Cornet/Windy (continued on page 18)

OUTRUNª L O G G I N G I S F U L L O F O B S TA C L E S . R E M O V E A S M A N Y A S YO U C A N . Simplify your day with the complete set of solutions that only John Deere provides. Get machines, technology, support and financing to move your operation forward. So no matter if you’re staring down steep terrain or market headwinds, you’re ready to OUTRUN. Learn more about our latest 900M-Series tracked machines at: JohnDeere.com/FellerBunchers

ConsultantProfile (continued from page 16) Ridge project, Lane had done some tree planting inspection and over-administered tree planting for Hancock Forest Management, where he worked with C&H Reforesters from Dalles, Oregon. Lane contracted C&H to do the planting, who brought 17 tree planters and three supervisors to the job. On average, each planter will do about 1200 trees per day.

A Small Company Multi-tasking

“We do a lot of the same things that a

private industry forester or even a government forester would do, but as a small company we do it all instead of being compartmentalized like the forest service or state would be,” Lane said, describing the scope of his company. Typically, Lane will sit down with a timber landowner and tour their ground with them to identify goals and objectives. Then he will explain what he sees from a silviculture standpoint. At that point, if the landowner decides to go forward, Lane will write a management plan.

READY FOR WORK.

Part of the management plan is a timber cruise to inventory the volume the landowner has. It also serves to separate the healthy from the unhealthy trees, so they have an idea of where each tree stands in terms of health and vigor. “The cruise helps us make our management decisions,” Lane added. “We’ll do regeneration surveys at that time too. It helps us get a picture together of what needs to be done.” If the client then wants to commercial log, Lane will lay out the units and mark the timber accordingly for forest health and the landowner’s objectives. Lane will also contract loggers, negotiate, and sell the logs. “We used to have five or six mills we could shop around, but now we’ve got one or two. I still try to get the best price I can for the landowner,” Lane said. In addition, Lane said he deals with the state as far as permits and any other issues or challenges that come with the project. “If we have a tricky creek crossing or logging near a waterway or fish stream, I deal with those issues and get permits.”

When Opportunity Knocks

SKID-STEER

FORESTRY DISC MULCHER • Cuts up to 14” diameter trees or brush • Mulches up to 6” trees or brush • Available in 60” cutting width • Comes equipped with hoses and couplers

Diamond Mowers builds heavy-duty equipment that is the toughest, safest, and most reliable in the business.

DEMAND BETTER. DEMAND DIAMOND.

800.658.5561

Info@DiamondMowers.com

TimberWest November/December 2018 www.forestnet.com

www.DiamondMowers.com

Currently, Lane Parry Forestry Consulting employs two full-time employees during the slow seasons of winter and spring. During the summer, Lane employs six total and contracts operators to handle the other various parts of his projects. Lane’s two sons also work for the company during college breaks. Coming out of Oregon State University in 1988 with a degree in Forestry, Lane went to work for Rogge Forest Products in the fall of that year. A few years later, the mill was bought out and new owners came aboard. Shortly afterward, Lane and Dick Tienhaara, his boss at the time, left to start their own consulting business. “A lot of private ground wasn’t managed like the big companies manage,” Lane said. “It was logger’s choice, but were they making the best subcultural forestry decisions? We felt that there was a need for consulting.” “It was right in the early 90s,” Lane recalled. “The log markets were going sky high crazy, and mills were buying everything they could find. As a result, good timber cruisers were in extremely high demand. We mainly just cruised timber.” After five years of working together, Lane and Dick split the business up, with Dick moving to Roseburg and Lane staying in Baker and Union counties. The skills acquired over those 30 years allowed him to tackle big projects and earn the Eastern Oregon Operator of the Year Award. TW

548/548 LL FOREST MACHINE

ROCK SOLID PERFORMANCE WITH LOWER OPERATING COSTS

POWERFUL LOGGING SOLUTIONS

KNUCKLEBOOM LOADERS

SKIDDERS

FOREST MACHINES

WHEEL FELLER BUNCHERS

TRACK HARVESTERS

TRACK FELLER BUNCHERS

The new 548/548 LL Forest Machines set a new standard with enhanced performance coupled with ultimate machine efficiency. Cat® proven components, purpose-built upper and lower frames, and application specific linkage configurations increase machine up time. Key features include: • Increased swing torque and lift capacity provides additional power to move trees

• 336 size, grease lubricated tracks, provide excellent life in variable working conditions

• Larger hydraulic pumps allow increased performance and maximum efficiency

• New premium rear entry cab and side entry cab enhancements improve operator experience

Look to your Cat dealer for financing and all the machines you need for sustainable harvesting and land management, forestry road construction, hauling and millyard. Total support from one source. www.cat.com/forestry

© 2018 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. www.cat.com www.caterpillar.com

THE NEW 572 XP CONQUERS ALL CONDITIONS ®

LOCATION: CANADA, BC, KOOTENAY RIVER ALTITUDE: 1100 AMSL TREE SPECIES: DOUGLAS FIR

PROVEN ENDURANCE FOR HIGHER PRODUCTIVITY.

COMING SOON

572 XP FEATURES: ®

• 12% higher cutting capacity for peak performance even under heavy loads.* • 10 times quicker air/fuel mix adjustment with AutoTune.™

The 572 XP® comes with the NEW X-Cut chain.

• Better power to weight ratio than any Husqvarna saw with similar displacement. • New state-of-the-art filtration system for longer and better filtration. • Excellent cooling capacity for a longer engine life. *Compared to previous models in the same cc range.

Connect with HusqvarnaUSA

LumberjackCompetition

A Look at a Lumberjack Champion

Northwest native Erin LaVoie excels at 2018 Lumberjack World Championships

By Ken Boness

Start in Forestry

ome say champions are

born. Others say champions are made. In the case of Erin LaVoie, it would seem both are true. A competitive spirit became evident during her formative years, but it was the combination of “will to win” and “ability to win” that has defined her exceptional career.

Born in Spokane, Washington, LaVoie’s outdoor inclinations led her to enroll in the forestry programs at Spokane Community College and Eastern Washington University. Schools that have forestry programs often field interscholastic teams in lumberjack sports. Just one year of competing as an amateur was all that was needed to convince Erin she wanted to expand her

involvement — to compete as a professional. She wanted to explore the world, not just the world of sawing and chopping but the planet, as well. Mission accomplished. Foreign competitions and demonstrations have taken LaVoie to Canada, Australia, New Zealand, China, and Germany. Travel-related expenses are a significant obstacle for competitors so securing sponsors is a must. LaVoie’s foremost sponsor is Kill Cliff, a brand of beverages relied upon by athletes in a wide variety of intense endeavors for a quick recovery.

Training

Erin being interviewed after an event. (Above) Erin LaVoie on left during the Lumberjack World Championship. 22

TimberWest November/December 2018 www.forestnet.com

Lumberjack competitors train with varying intensities, with some stepping up physical conditioning as the season approaches. LaVoie, on the other hand, has made maintaining body tone her career. Opening Predation Crossfit in Spokane, Erin established an all-encompassing training facility. Working with clients naturally keeps Erin fit but ‘fit’ isn’t sufficient. The details of a competitive endeavor must be attended to. Honed. Perfected. Practiced. For Erin, training with axe and saw in hand (continued on page 24)

Make Chains Obsolete ECO-Wheel Tracks are an affordable alternative to tire chains. They provide superior traction and eliminate unnecessary maintenance compared to conventional chains. As the largest manufacturer of tracks for rubber tired forest equipment, our wheel tracks are engineered to lower costs and increase productivity. Numerous benefits over chains include: • • • • •

Improved traction - NO MORE SPIN AND GRAB Less maintenance, easy adjustments Extended tire life, ﬁts new or used tires Less spinning means less rutting Self-cleaning

Unchain the POWER WHERE THE ROAD ENDS, ECOWHEEL TRACKS TAKE OVER. Think Up, Forward and Over and Choose the Right Tracks.

A PROVEN TRACK RECORD FOR PERFORMANCE & DURABILITY

Visit www.eco-tracks.com for more product details.

Contact: Olofsfors Inc. Tel: (519) 754-2190 Fax: (519) 757-1100 Email: info@olofsfors.com

LumberjackCompetition (continued from page 22) requires wood, and for that commodity she relies on Robert Groce, a friend and supporter. As in logging, planning the work and working the plan are very important — the location, angle, and order of the axe blows, as well as placement of the feet on the logs and hands on the axe handle. The position of the head and the feet in crosscut sawing, movement of the arms, angles of the thrust, and withdrawal are all reviewed over and over in Erin’s head with the intensity of the review increasing as the moment of competition approaches. LaVoie’s favorite event is the Underhand Chop. Standing atop a horizontal log, Erin is its master in the truest sense, for the log is totally at her mercy. And ‘mercy’ is in short supply when the timer says, “GO!” The axe head whistles through its arc. The log groans. Chips the size of saucers fly. Erin’s feet swap positions. The backside of the log is attacked. The two ends of the log move independently. And LaVoie steps down. Smiling. Sweating. Evaluating the skill of her work. (It took me longer to write this paragraph than Erin consumes in subduing a log with one of her axes.)

Erin LaVoie

TimberWest November/December 2018 www.forestnet.com

2018 Results

All of that work, that planning, that conditioning came together this summer at the 2018 Lumberjack World Championships held in Hayward, Wisconsin. LaVoie won the Underhand Chop championship but finished seventh in the Women’s Single Buck, a second and a quarter behind Kate Witkowski (WI). Those two women teamed up in the Jill & Jill Double Buck and took top honors. As did Matt Cogar (WV) and Jason Lentz (WV) in the Men’s Double Buck. That pairing is of significance as Lentz is LaVoie’s Jack & Jill partner, while Cogar matches up with Witkowski. Although neither woman was part of the winning Jack & Jill team LaVoie/Lentz took second place and, less than one second behind, Witkowski/Cogar placed third. When the last chip had fallen, LaVoie was declared All Around Lady Jill with Witkowski holding second place. Lentz took the equivalent honors for the men with Cogar close behind. With a spring in her step, Erin mounted the chopping/sawing deck one more time to accept her award. Smiling. Appreciative. Gracious. And knowing that all the work was worth it. TW

ConferenceReview

Third Annual Redwood Region Resource Rally Students and teachers enjoy a tour of the Humboldt Redwood Company (HRC) Scotia sawmill.

TimberWest November/December 2018 www.forestnet.com

ConferenceReview

By Mary Bullwinkel

n an attempt to recruit and

engage the next generation of natural resource professionals, more than 200 high school students, teachers, and chaperones attended the Third Annual Redwood Region Resource Rally held in late September in northern California. Students from six California counties (Humboldt, Del Norte, Mendocino, Trinity, Lake, and Sonoma) attended the day-long gathering to learn about forestry and natural resources, as well as agriculture and related career opportunities.

Students and teachers lean about potential careers in the industry.

Visiting Various Stations

The forestry and natural resource students were divided into groups of approximately 30 students and rotated through six stations in the small town of Scotia. Students met with industry professionals and observed live demonstrations while learning about forestry and logging, fish and wildlife, operating heavy equipment, diesel mechanics, and sawmill operations. At the forestry and logging station located in Humboldt Redwood Company’s (HRC) Scotia Tree Farm, students heard from professional foresters and loggers, and they observed a tree felled, bucked, and skidded. The timber faller was David Walters, and HRC employee Scotty Fowler was the operator of the Caterpillar D7HXR grapple machine. Both talked to the students about their jobs and how much they enjoy their work. The Scotia Tree Farm was planted in the early 1980s and supports a healthy growing redwood forest with trees more than 35 years old.

Motivating for Future Careers

When students visited the heavy equipment shop in Scotia, they learned about diesel mechanics and how to become an equipment operator. To demonstrate the value of the Redwood Region Resources Rally and to highlight current employment opportunities in the industry, the students were told that two participants in a previous year’s Rally are now employed at the shop in Scotia. To encourage students to become involved in the industry, CAT representatives were on hand at the shop to talk to the students about training programs offered by the construction, logging, and mining equipment manufacturer. Cat offers both online and in-classroom training. Sandy Dale, a high school agriculture teacher and one of the coordinators of the Resource Rally said, “Making industry (continued on page 28)

www.forestnet.com November/December 2018 TimberWest

ConferenceReview (continued from page 27)

Tour at HRC Scotia mill.

connections is key to career success, and this event gives students that opportunity and so much more. Students are getting to have real conversations with industry professionals in small group settings,” she added, “and it is very rewarding to see students excited about their career goals and making plans to achieve them.” A guided tour of HRC’s Scotia sawmill showed students the many components of the milling operations. And wildlife and fisheries biologists educated students about career opportunities in those career fields.

New Technology and Education

Educational outreach continued when all participating students, tour guides, presenters, and volunteers gathered for lunch at Fireman’s Park in Scotia. College of the Redwoods (CR) Forestry Department presented a drone demonstration and the latest application of the technology in the logging and forestry industries. A representative of the Humboldt State University forestry program also gave a presentation, the Humboldt County Office of Education’s Building Trades Trailer was on site, and students talked oneon-one with a logging truck driver.

“We could not be more proud of the opportunities that this day offered our students,” Dale said. “The commitment and enthusiasm shown by the industry folks are a testament to the industry as a whole,” she added. The agricultural branch of the Redwood Region Resource Rally was added to the focus of the annual gathering, to give local students information about local career opportunities in that industry. The students visited three Humboldt County businesses during their day of study: the Alexandre Eco Dairy in Ferndale, the Humboldt Auction

Yard in Fortuna, and Sarvinski Organic Farm in Pepperwood. There was also information presented about the College of the Redwoods agriculture program and the school’s Shively Sustainable Farm. The rally was successful due in part to the sponsors of the annual in-the-field, career day event: Redwood Region Logging Conference, North Coast Ag Partners, Humboldt County Farm Bureau, Humboldt Redwood Company, and Green Diamond Resource Company. TW

Introducing

www.NorthAmericaSupply.com Your new link to www.tirechainsrequired.com and www.harvesterbars.com. These two sites are coming together to offer you all the same high quality brands you’ve come to know and trust in one convenient online location. Tire chains, saw bars, saw chain and hot saw teeth delivered straight to your door. Visit or call toll free to speak with a rep at

1-855-255-0871 sales@northamericasupply.com Logging and industrial supplies, wire rope, chain and accessories coming soon!

The successful event introduced hundreds of students to the woods. 28

TimberWest November/December 2018 www.forestnet.com

AFRC Intervenes in Northwest Litigation

Region 1 Salvage Success

AFRC recently held its fall Region 1 monitoring meetings. Topics covered included updates from the regional office regarding direction from the Washington Office, budgets, long-term timber targets, staffing, and litigation. In FY18, the region’s timber target was 390 mmbf. Region 1 sold 355 mmbf or 91% of its target, the shortfall was due to some sales that were sold in FY18 but cannot be recorded until FY19. The FY19 target is 420 mmbf, and the region will ramp up yearly until it hits a long-term goal of 500 mmbf. The region currently has 246 mmbf tied up in litigation. The forests are attempting to ramp up their timber sale programs from FY18. The Kootenai and Lolo sold larger volumes of salvage timber in FY18 and will ramp up from where they were in recent years. Current FY19-FY21 targets for each Forest are as follows: FY19 FY20 FY21 Kootenai .............................. 71 mmbf ......... 69 mmbf........ 67 mmbf Lolo...................................... 39 mmbf.......... 45 mmbf........ 51 mmbf Idaho Panhandle................... 59 mmbf ......... 86 mmbf ....... 86 mmbf B-D ..................................... 38 mmbf ......... 43 mmbf ....... 41 mmbf Custer-Gallatin .................... 23 mmbf ......... 22 mmbf ....... 21 mmbf Helena-Lewis and Clark ...... 40 mmbf ......... 48 mmbf........ 55 mmbf

TimberWest November/December 2018 www.forestnet.com

On October 30, Judge Christensen of the United States District Court, District of Montana, granted AFRC’s motion to intervene on behalf of AFRC member Sun Mountain Inc. in the North Hebgen Project litigation. The North Hebgen Project is located on the Gallatin portion of the Custer-Gallatin National Forest and abuts the western edge of Yellowstone National Park. The project allows for 5,670 acres of commercial and non-commercial harvest and has three sales associated with the project: Teepee Stewardship, Whits Red, and Hebgen Flats. On November 15, Judge Mosman, of the United States District Court, District of Oregon, also granted AFRC’s motion to intervene on behalf of AFRC member High Cascade Inc., in the Crystal Clear Restoration Project (CCR Project) litigation. High Cascade is the purchaser of the Ahoy Stewardship Contract, the first sale from the CCR Project. The CCR Project is located on the Barlow and Hood River Ranger Districts of the Mt. Hood National Forest. The project’s purpose and need is to provide a sustainable supply of forest products, as directed by the Northwest Forest Plan, and address concerns related to high-intensity wildfires, specifically in the dry mixed-conifer ecosystem next to the Juniper Flats Wildland Urban Interface.

Restoring Forest Health, One Neighbor at a Time

Washington State’s healthy forests are vital to clean water and air, the economy, carbon sequestration, fish and wildlife habitat, and recreational opportunities. However, insects, disease, invasive plants, etc., continue to expand. To restore health to our forests, DNR has developed a 20-year Strategic Forest Health Plan committed to treat 1.25 million acres of unhealthy forestland in Central and Eastern Washington by 2037. The plan is unprecedented in its scope and application. It embraces an all-lands, allhands approach, recognizing that solutions for improving forest health must span property lines and government jurisdictions. Coordinating forest health treatment efforts with all willing forest landowners in high-priority watersheds is a key part of the forest health plan. DNR worked on the plan with more than 30 agencies, interest groups, and organizations, representing private, state, and federal forest landowners, state agencies, tribes, the forest industry, universities, and conservation groups. One of DNR’s key landowner groups is the small private forest landowner. The agency has foresters on staff to provide forest health evaluations, technical assistance, and cost-share programs to help offset the expense of forest health treatments. The DNR asks that you please call (509) 925-8510 if you own forestland in Adams, Asotin, Benton, Chelan, Columbia, Douglas, Franklin, Garfield, Grant, Kittitas, Klickitat, Lincoln, Walla Walla, Whitman, and Yakima counties; or (509) 684-7474 if your forestland is in Okanogan, Ferry, Stevens, Pend Oreille, and Spokane counties, or the northern portion of Lincoln County. When you call, ask to speak to someone from the Landowner Assistance Program. For more information, about the 20-year Forest Health Strategic Plan, visit www.dnr.wa.gov/ForestHealthPlan. TW

FireColumn

By Lindsay R. Mohlere

Paradise Lost

he rains finally arrived in Northern California, with enough precipitation to help 1,000 firefighters battling the Camp Fire bring the blaze under control. Now the once-raging vortex that wiped Paradise, California, off the map, displaced nearly 15,000 inhabitants, and killed more than 88 people has left nothing but a slurry of ash and broken dreams. The Camp Fire started on November 8 at 6:29 a.m. Critical fire weather conditions pushed the blaze to over 100,000 acres in two days. As of November 25, the fire had destroyed more than 153,000 acres. As of December 1, 25 people remain missing and unaccounted for, which really means presumed dead. Recovery crews of coroners, forensic anthropologists, and others use simple tea

screens to sift through the grit and ash for miniscule human remains. DNA matching will take months to accomplish. It is California’s deadliest fire. A nightmare tragedy. The Camp Fire was contained shortly after Thanksgiving Day, but the blathering, divisive dialog from county, state, and national leaders continues, whipped by windbags more concerned about the next election cycle than doing something positive and necessary. President Trump has criticized California for poor forest management. Governor Jerry Brown countered with climate change. Zinke blamed “environmental terrorists.” And so on. The incredible thing is both sides agree on the problems. Too much fuel in the forests. Unfortunately, they can’t get close to a mutual agreement without drawing blood.

TimberWest November/December 2018 www.forestnet.com

Last year, the major fires in Oregon and Washington seemed to wake up and prod the respective legislative gangs into action. Hopefully, California doesn’t throw away its “don’t waste a crisis” moment. If not, it will truly be Paradise Lost.

The Farm Bill. Maybe?

As of this writing, the House-approved 2018 Farm Bill is still being bounced around the Senate. New forestry provisions in the bill feature significant forest management reforms that would protect communities and help reduce the risks of catastrophic wildfires like Oregon’s Chetco Bar fire, Washington’s Range 12 fire, and California’s Carr and Camp fires. The bill would expedite logging, thinning, and burning (as appropriate) on forests and watersheds at immediate risk; remove “hazard (continued on page 34)

A WORKHORSE FROM DAWN TO DUSK. MANY MODELS, ENDLESS APPLICATIONS High volume wood waste recyclers know that when it comes to creating the highest volume products at the lowest cost per ton, Peterson horizontal grinders offer better fracturing, more accurate product sizing, and more throughput than any horizontal grinder on the market.

Since 1981, Peterson’s attention to detail and drive to build the highest quality, highest volume producing machines make a Peterson a sure investment. Want to see what a Peterson Horizontal Grinder can do?

Give us a call at 800.269.6520 or visit us at www.petersoncorp.com

Blower Trucks

•

Chippers

•

Grinders

•

Screens

•

Stacking Conveyors

FireColumn (continued from page 32) trees” from fire that pose public safety risks; salvage dead and dying timber after fire; and manage and contain insect and disease infestations on federal forests. Sounds all fine and dandy, doesn’t it? Makes sense too. Should be bipartisan. Ha! Don’t kid yourself. When you have the opposition believing that any attempt to change how we approach managing our forests with thinning and fuels reduction is just another way of filling the timber industry’s coffers, you’ve got a problem. I hope the Senate gets off the dime and the 2018 Farm Bill gets inked before our esteemed senators and representatives take a month off to press the flesh. If it doesn’t happen, I doubt anything close will pass muster once the new legislative bodies return to work in January.

Some Good News

As we come to the end of 2018, the devastation of this year’s 7,778 wildfires has been estimated to be more than 1.8 million acres, and the bickering and frivolous lawsuits continue. However, there is good news. In March, Congress passed the $1.3 trillion omnibus budget. It stopped a government shutdown and funded our military. In addition, it solved the “fire borrowing” conundrum that has plagued the Forest Service for years. The bill funds a contingency account for wildfire fighting with up to $2 billion a year for a decade. It will prop up the Forest Service’s management budget when suppression costs exceed the regular fire budget, and wildfire fighting costs will be paid for much like other disasters. The spending bill also increases to 20

years the top-end length of wildland stewardship contracts for areas of high fire risk and reduces some environmental review requirements, including a 3,000-acre categorical exclusion provision that streamlines approval for logging and fuels reduction efforts on federal land parcels under 3,000 acres. This provision of the bill has lawsuithappy environmental groups whining. The takeaway is the bill doesn’t get fully active until 2020. This year, the feds forked over $500 million for wildfire fighting and another $40 million for management costs. The reason the big bill didn’t come into play is that the Republican majority wanted to stay within 2018-2019 discretionary spending caps. Even with all its flaws, the bill has the

TimberWest November/December 2018 www.forestnet.com

potential to make a huge difference in how the Forest Service manages the forests.

That’s a Wrap

In 2019, we are transitioning the Firebreak column to the sidelines, but coming back with exceptional information and news of new technologies in the timber industry. The column, Emergent Technologies, will appear in the January/ February 2019 issue of TimberWest. The new column will explore some of the many new technological advances designed to increase efficiency, safety, and productivity in our industry. Best of the New Year to all. And, as always, stay safe out there. TW Photo Credit: U.S. Department of Agriculture/USFS

Fuchs Celebrates 130 Years

More than 300 customers, distributors, and team members from around the world joined Fuchs in Bad Schönborn, Germany, October 18–20, 2018 for a three-day celebration to mark their incredible 130th anniversary. Founded by Johannes Fuchs in 1888 as an agricultural machinery and stable equipment manufacturing business, Fuchs has evolved into a specialist material handling company. First established in Germany, Fuchs today has a truly global presence. Dominik Vierkotten, Fuchs managing director, said, “We are increasing our market penetration through investments in service, support, and sales specialists. Since 2016, we have 10 newly appointed distributors in the United States, and we have recently sold seven material handlers into Lumut Port—Malaysia’s biggest dry bulk jetty.”

Waratah Celebrates 45th Anniversary

Waratah Forestry Equipment is proudly celebrating 45 years of innovation and serving customers in the forestry industry. Established in Tokoroa, New Zealand, in 1973, the company transitioned to meet local loggers’ heavy-duty delimbing needs creating a delimber-feller buncher featuring a four-roller fixed head. Following that innovation, a red grapple processor for the Canadian markets marked the beginning of the 600 Series and solidified its place as the original red head in the industry.

MAXIMIZE YOUR RUNTIME Advanced Technology Extensive Field Testing Cutting-Edge Materials Unmatched Durability

Harvester Bars - Harvester Sprockets - Chain Measuring Wheels - Bar Repair - Replacement Tips

www.gemchainbar.com 800-455-8471 36

TimberWest November/December 2018 www.forestnet.com

Today, Waratah heads are found in all logging applications from felling on steep slopes, to cut-to-length hardwood harvesting at the stump, to processing on a landing or debarking on endless plantations. “We’re dedicated to serving loggers across the globe,” said Heather Robinson, general manager of worldwide distribution, Waratah. “As an industry leader and the manufacturer of the original red head, we’re in a unique position to offer customers experience, expertise, and innovation. We’re excited to celebrate the past 45 years and look forward to the next 45.”

Diamond Mowers Acquires AborWolf

Diamond Mowers, LLC has purchased the ArborWolf brand skid-steer and tractor-mounted stump grinding product assets from the Minnesota-based manufacturer, WolfDesign. Diamond Mowers will leverage its dealer network, comprised of more than 350 locations throughout the United States, Canada, Brazil, and Australia, to distribute the stump grinding products. Diamond Mowers will rebrand the ArborWolf stump grinders and is expected to release products under the Diamond brand beginning in 2019. Diamond Mowers will immediately support existing ArborWolf customers. Terms of the agreement were not disclosed. www.diamondmowers.com

New Regional Forester for Alaska Region

USDA Forest Service Chief Vicki Christiansen announced the appointment of David Schmid as regional forester for the Forest Service’s Alaska Region. As regional forester, Schmid will oversee management of more than 22 million acres of National Forest System lands in Southcentral and Southeast Alaska. Schmid has been acting regional forester in Alaska for the last eight months filling in behind Beth Pendleton who retired in April. “David’s more than 30 years of experience and his commitment to maintaining strong relationships with people, stakeholders, and communities make him exceptionally well qualified for this job,” Christiansen said. “I’m also pleased that he’s bringing both his leadership skills and 23 years of experience on the Chugach and Tongass National Forests to this role.”

Safe Fleet Acquires Roll-Rite

Safe Fleet, a provider of safety and productivity solutions for fleet vehicles, is pleased to announce that it has acquired the RollRite group of companies. Roll-Rite is a provider of innovative OEM and aftermarket safety products that protect cargo, reduce risks to drivers and roadways, and improve fleet efficiencies. Under the Roll-Rite and Pulltarps brands, Roll-Rite manufactures a complete line of application-specific automated and semi-automated tarping systems, motors, controls, and tarps for body dump trucks, open top trailers, and detachable containers. It is estimated that there are over 150,000 trucks and trailers on the road equipped with Roll-Rite or Pulltarps systems. www.safefleet.net TW

JOIN US AT THE OREGON LOGGING CONFERENCE - FEBRUARY 21, 22 & 23, 2019 REGISTRATION APPLICATION – LANE COUNTY FAIRGROUNDS, EUGENE, OREGON P.O. Box 10669 ∙ Eugene, OR 97440 ∙ Tel 541.686.9191 ∙ Fax 855.866.0572

COMPANY ADDRESS TELEPHONE

FAX

CITY

ST/PROV

POSTAL CODE

Please List Names Of Individuals Attending Conference: (attach sheet for additional names)

PLEASE COMPLETE INFORMATION BELOW

Price

$95 x $50 x

Registration - Fee includes Thurs. & Fri. Breakfast Tickets Spouse Registration - Fee includes Thurs. & Fri. breakfast tickets

Number

=$ =$

(Spouse must pay registration to qualify for Professional Logger Credits) Additional Meal Tickets: Desserts for Dreams Tickets: Friday, Feb. 22, 2019 Friday Celebration Party Tickets: Friday, Feb. 22, 2019 Breakfast Tickets – [ ] Thursday Payment: Check [ ]

[ ] Friday @ $25 per person each day

Visa [ ] MC [ ]

American Express [ ]

Provide mailing address if different from above: Name on Card: 38

Signature:

TimberWest TimberWest November/December November/December 2018 2018 www.forestnet.com www.forestnet.com

$30 x $55 x $25 x

=$ =$ =$

Total

Oregon and Washington Forest Practices Seminar Topics

This year’s Oregon and Washington Forest Practices Seminars, held at the Wheeler Pavilion and SE Meeting Room Exhibit Hall respectively, include a wide range of topics.

Oregon

• How to Identify HLHL, and Explain the Risk of Owning HLHL Identified Lands • Oregon Forest Practices Act Enforcement — Purpose and Process — Things to Know and Avoid • Reforestation Rules • Written Plans: When Are They Needed, and How to Write Them • Full Bench Road Construction, Techniques and Rules • Locating Suitable Waste Areas for Road Construction Material

Washington

• Washington Forest Practices Permitting: Applying for Permit/Communication with State and County • Temporary Crossings Over Typed Water and Long Term Harvest Permits Make sure to register today to take part!

Events Not to Miss

81st Oregon Logging Conference Announces Keynote Speaker

• Ladies Dessert for Dreams, Friday, Feb. 22, 12:30 pm to 3pm, in the Composers Hall main level, at the Hotel Eugene (formerly Eugene Hilton). This year’s charity is the STEAM program.

Secretary Ryan Zinke, U.S. Secretary of Interior, has been invited to deliver the keynote address at the 81st Oregon Logging Conference, on Thursday, February 21st, 2019, in the Wheeler Pavilion, Lane Events Center and Fairgrounds, Eugene, Oregon. Zinke was sworn in as the 52nd Secretary of the Interior on March 1, 2017. He is a fifth-generation Montanan and former U.S. Navy SEAL Ryan Zinke Commander and built one of the strongest track records in the 114th Congress on championing sportsmen’s access, conservation, regulatory relief, forest management, responsible energy development, and smart management of federal lands. Growing up in a logging and rail town near Glacier National Park, Ryan has had a lifelong appreciation for conserving America’s natural beauty while honoring Teddy Roosevelt’s vision of multiple-use on our public lands. He has consistently led the efforts to renew the Land and Water Conservation Fund in Congress, and has also been a firm advocate for our nation’s sportsmen to gain access to our public lands with the SCORE Act and SHARE Act. Zinke also coauthored the Resilient Federal Forest Act, which initiated new reforms for revitalizing America’s timber towns and preventing wildfires by emphasizing the collaborative process. For more information visit www.oregonloggingconference.com or call 541.686.9191

Don’t miss these events taking place during the three-day conference.

• OLC Log Loader Competition, Friday and Saturday, Feb. 22 and 23. The exciting event is sponsored by Triad Machinery and Link-Belt out on the display area. • Sawdust Bowl, Thurs and Friday, Feb. 21 and 22, held in the Performance Hall of the Convention Center at 4:30 pm to 6 pm after a long day at the conference. • OLC Buffet Dinner and Dance, Friday, Feb. 22, 7 pm to 12 midnight. Come celebrate OLC’s 81st anniversary at the Playwrights Hall at the Hotel Eugene (formerly Eugene Hilton). • Family Fun and Education, Wood Carvers, all taking place Saturday, Feb. 23, in the Wheeler Pavilion and out in the display area.

Hands-On Seminars

Don’t miss out on these 2019 Hands-On Seminars

Thursday

• Cedar Logs and Their Habits, Mike Keller of Keller Lumber Co. • Hardwood Log Roll-Out, NW Hardwoods

Friday

• Changes in DOT Truck Regulations You Need to Know About, David Gray, Glostone Trucking Solutions • Feller Buncher Best Practices: Operation, Safety and Maintenance, Rodney Hunter, Komatsu America Corp.

www.forestnet.com November/December November/December 2018 2018 TimberWest TimberWest www.forestnet.com

39 39

“Building Products for Building Futures” LANE COUNTY EVENTS CENTER & FAIRGROUNDS - EUGENE, OREGON TENTATIVE PROGRAM AND SCHEDULE OF ENTERTAINMENT

WEDNESDAY, FEBRUARY 20, 2019 - Activities Held At The Hotel Eugene 4p.m. – 6:30p.m. Pre-Registration – Meet & Greet - “Hosted Beer & Wine – Sponsor: Wilcox & Flegel 4p.m. - 10p.m. Doors Open for Silent Auction benefiting “Talk About Trees” 6:30p.m. OWIT Dinner and Live Annual Auction – Call OWIT at 503.831.1593 to order tickets. “Hosted Beer & Wine” – Playwrights Hall, Hotel Eugene (formerly Eugene Hilton)

For Information Call: 541-686-9191 www.oregonloggingconference.com

THURSDAY, FEBRUARY 21, 2019 - Program Sessions Held At Lane County Fairgrounds 7a.m. - 4p.m. Registration - Main Convention Center Lobby – Yellow Area on Map – Sponsor: Rotobec 8a.m. - 5p.m. Equipment Displays Open 7a.m. - 8a.m. Opening Session Breakfast - Wheeler Pavilion Ticket included with paid registration – Orange Area on Map – Sponsor: Peterson CAT and Caterpillar 8:00a.m. – 11:00a.m. Opening Prayer: Kirk Luoto, Cross and Crown, Carlton, Oregon Oregon Logging Conference Foundation Auction: Auctioneer Jaime Yraguen, Basco Logging Call to Order: Wheeler Pavilion - 2 PL Credit Welcome: Eugene Convention & Visitors Bureau Greetings: Don Banasky, 2019 President, Pacific Logging Congress Program Update: Greg Stratton, 1st Vice President, Oregon Logging Conference President's Address: Jim Dudley, 2019 President, Oregon Logging Conference Oregon State University Forestry Program Update: Keynote Speaker: Secretary Ryan Zinke, United States Secretary of Interior - Invited 9a.m. - 4p.m. Chainsaw Wood Carver – Outside Demonstration Area 10a.m. - 1p.m. Elementary School Education Tours, Sponsors: Oregon Logging Conference, Oregon Women in Timber and Forests Today and Forever 11a.m. – 12p.m. Hands On Seminar 1 – 1 PL Credit - Outside Display - Red Area on Map “Cedar Logs and Their Habits” presented by Mike Keller, Keller Lumber Co, Roseburg, OR “Hardwood Log Roll-Out”, presented by a Representative from NW Hardwoods Moderator: TJ Hammerschmith, Swanson Group 12p.m. - 1p.m. Free Time to View Equipment Displays 1:00p.m. Meeting Called To Order - Wheeler Pavilion 1:15p.m. Operators of the Year Presentation – Oregon Department of Forestry 2:00p.m. - 3:00p.m. Better Ideas / New Technology - 1 OPF Credit - Orange Area on Map Moderator: Frank Chandler Jr., Technical Forest Solutions, Kelso, WA This panel will cover the topic of grapple logging, which not only is a safer way to harvest timber it is done usually with 2 or 3 less employees. Employees are so difficult to find this makes it highly attractive to employers. There is much work to be done here both on the application side as well as the manufacturing side. • Eric Krume, Summit Equipment, Kelso, WA – This presentation will cover the following; what the future holds for automation; tower logging at night and how using new concepts within existing infrastructure is challenging. • Vince Wilbur, Technical Forest Solutions, Kelso, WA – Presentation will cover advantages to Grapple logging- safety, less manpower and technological advances in the equipment. • Curtis Inman, Weyerhaeuser Co., Castle Rock, WA – Presentation will cover the land owner’s perspective on new technology. • Tyson Lambert, T-MAR Industries LTD, Campbell River, BC, Canada – Presentation will discuss the many innovations that make cable logging more efficient and easier. What’s required of the yarder itself to take advantage of these developments and use the newly available equipment. 4:30p.m. - 6:30p.m. Sawdust Bowl "Hosted Beer & Wine – Performance Hall, Convention Center Co-Sponsors: Kerr Construction and Ritchie Bros. Auctioneers FRIDAY, FEBRUARY 22, 2019 - Program Sessions Held At Lane County Fairgrounds 7a.m. - 4p.m. Registration - Main Convention Center Lobby – Yellow Area on Map – Sponsor: Rotobec 8a.m. - 5p.m. Equipment Displays Open 7a.m. - 8a.m Hosted Breakfast – Wheeler Pavilion – Ticket included with paid registration - Orange Area on Map – Sponsor: Pape’ Group 8a.m. Oregon Logging Conference Foundation Auction: Auctioneer Jaime Yraguen, Basco Logging 9a.m. - 4p.m. Chain Saw Wood Carver –- Outside Demonstration Area 9a.m. - 3p.m. High School Student Event “Future Forestry Workers Career Day”, Private Event – Livestock Arena Sponsors: Oregon Logging Conference Foundation and the Oregon Logging Conference 9a.m. – 3p.m. High School Forestry Skills Exhibition – Private Event - Livestock Arena Sponsor: Nygaard Logging and Warrenton Fiber 8:30a.m. - 11:30a.m. Oregon Forest Practices Seminar - 3 FP Credits - Wheeler Pavilion – Orange Area on Map Moderator: Brian Tenbush, Rosboro  • How To Identify HLHL, and Explain the Risk Of Owning HLHL Identified Lands, presented by Mike Buren, ODF, Geotechnical Specialist  • Oregon Forest Practices Act Enforcement – Purpose and Process - Things to Know and Things to Avoid, presented by Paul Clements, ODF, Compliance & Training Coordinator, Private Forests Division  • Reforestation Rules, presented by Rodney Jacobs, Forester Stimson Lumber Company Written Plans: When Are They Needed, and How To Write Them, presented by Bill Mahr, ODF, Stewardship Forester  • Full Bench Road Construction, Techniques and Rules Surrounding This Type of Construction, presented by Kevin Boston, Registered a PE in Oregon and RPF in California • Locating Suitable Waste Areas for Road Construction Material, presented by Mike Dewey, ODF, Stewardship 8:30a.m. - 10:30a.m. Washington Forest Practices Seminars - SE Meeting Room Exhibit Hall, 2 WAFP or 2 PL Credit – Blue Area on Map Moderator: Paul Hadaller, Pacific Fiber Co. Byron Hinners, Forester, Hadaller Logging Washington Forest Practices Permitting: Applying for Permit / Communication with State or County. – This presentation will cover the following topics: 1) When is a Forest Practice Permit Required For Harvest of Timber in Washington? 2) Steps and procedures when applying for Washington or county Forest Practices permit. 3) Procedures when communicating with Washington State or county for ingress from public roads. John Schmit, Log buyer, RSG Forest Products Temporary Crossings Over Typed Waters and Long Term Harvest Permits. – This presentation will cover temporary Crossings; log bridges design and construction. Long term harvest permits advantages of LTA and process of obtaining a LTA. 10a.m. – 11a.m. Business Seminar 1 - 1 PL Credit - SW Meeting Room – Exhibit Hall - Green area on Map, Sponsor: Pape’ Machinery Moderator: Quincy Powers, Powers Ranch Co., Powers, OR “Final Tier 4 Engines in Forestry Equipment – Operation and Maintenance”, presented by Rob Topel, New Products Engineer and Technical Communicator Pape’ Machinery, Eugene, Oregon – Discussion will cover the general operating and maintenance practices for Final Tier 4 engines, after-treatment system overview, the use of correct fluids and proper storage and handling of DEF 40 TimberWest | November/December 2018 | www.forestnet.com

"OLC" Log Loader Competition – Sponsors: Triad Machinery and Linkbelt - Outside Display Brown Area on Map Visit www.oregonloggingconference.com or call 541-686-9191 1:00p.m. – 2:p.m. Business Seminar 2 – 1 PL Credit - Wheeler Pavilion, Orange Area on Map Moderator: Steve Henson, Potlatch “Agile in The Woods ~ New for 2019”, presented by Wendy Farrand, Consultant From this presentation logging contractors will learn about Agile and the Agile Revolution, and how they can apply some of those tools and concepts to the business of logging. 1:00p.m. – 2:00p.m. Hands On Seminar 2 – 1 PL Credit – Freightliner NW, Auditorium, Teal Area on Map “Changes In DOT Truck Regulations You Need to Know About” presented by a David Gray, Glostone Trucking Solutions This topic will address Department of Transportation Rules and Regulations. 1:30p.m. - 3:30p.m. Life Flight - SE Meeting Rm, Exhibit Hall – 2 PL Credit - Green Area on Map Moderator: Bodie Dowding, Oregon Dept. of Forestry “Life Flight: LZ, Loading, and Capabilities”, Presented by Troy Speziale, Life Flight Network, Customer Service Manager, Flight Paramedic – This course will cover when to call for a Life Flight Transport, how to set up the Landing Zone, our loading procedures, and treatments you can provide to the injured. Classroom portion features a short PowerPoint presentation followed by an interactive round table discussion. Focus will be on caring for the injured prior to our arrival, setting up a landing zone, preparing patient for transport, and on scene loading responsibilities. 300p.m. -4:00p.m. Business Seminar 3 – 1 PL Credit - Wheeler Pavilion, Orange Area on Map Moderator: Eric Gehrke, Weyerhaeuser Co. “Loggers! Don’t Leave Culture to Chance!”, presented by Wendy Farrard, Consultant – Leaders in the woods should not leave culture to chance. Company culture is more important now than ever. Focusing on culture can improve business relations inside and outside of your business. Leave this presentation with a better understanding of how to reinforce the culture your company, and our industry deserves. 2:30p.m. - 3:30p.m. Exhibitor Hands On Seminar 3 - 1 PL Credit – Sponsor: Modern Machinery Outside Exhibit area. Moderator: Jason Vaughn, Modern Machinery “Feller Buncher Best Practices: Operation, Safety and Maintenance”, presented by Rodney Hunter, Customer Support Manager, US West & Western Canada, Komatsu America Corp. – This seminar will cover the general operational tactics, major safety concerns and routine maintenance and inspection for feller bunchers the general operations and maintenance of harvesting equipment. 4:30p.m. - 6:00p.m. Sawdust Bowl "Hosted Beer & Wine" Performance Hall, Convention Center, Sponsor: J Stout Auctions EVENTS HELD AT THE HOTEL EUGENE (Formerly EUGENE HILTON) 12:30p.m. - 3p.m. LADIES' DESSERTS FOR DREAMS – Charity Event for Oregon STEAM a Douglas County Partners for Student Studies Program. Enjoy Decadent Desserts Donated from area Restaurants and Bakeries Visit http://www.oregonloggingconference.com or call 541-686-9191 to order tickets. 7p.m. – 11p.m. 81st OLC Celebration Buffet Dinner & Dance – Playwrights Hall, Hotel Eugene formerly Hilton – Sponsor: Swanson Group 7p.m. – 8p.m. Doors Open - Hosted Beer & Wine Tasting 7p.m. – 8:30p.m. Buffet 7:30p.m. – 12p.m. Dancing to Redneck Mother – Sponsor: General Trailer and Peerless Parts 11:30a.m. – 3:30p.m.

SATURDAY, FEBRUARY 23, 2019 - All Activities Held At Lane County Fairgrounds 9a.m. - 2p.m. All Exhibits Open To Public – Convention Center & Parking Area Family Fun and Education Activities – Wheeler Pavilion –Sponsor: KEZI TV Wood Carvers – Outside Demonstration Area 10a.m. - 12p.m. “OLC” Log Loader Competition – Sponsored by Triad Machinery and Linkbelt - Outside Display - Brown Area on Map

Panels and Seminars at a Glance The OLC will offer a wide range of panels and seminars to choose from. Earn professional logger credits while you stay current on these topics.

THURSDAY

Hands-On Seminar 1 – 1 OPF Credit Cedar Logs and Their Habits Presenter: Mike Keller, Keller Lumber Co. Hardwood Log Roll-Out Presenter: NW Hardwoods Better Ideas/New Technology in Logging Panel – 1 OPL Credits Moderator: Frank Chandler Jr., Technical Forest Solutions Grapple Logging – panel • Eric Krume, Summit Equipment • Vince Wilbur, Technical Forest Solutions • Curtis Inman, Weyerhaeuser Co. • Tyson Lambert, T-MAR

FRIDAY

Oregon Forest Practices Seminar – 3 FP Credits Moderator: Brian Tenbush • How to Identify HLHL, and the Risk of

Owning HLHL Identified Lands • Oregon Forest Practices Act Enforcement – Purpose and Process – Things to Know and Things to Avoid • Reforestation Rules • Written Plans: When Are they Needed, and How to Write Them • Full Bench Road Construction, Techniques and Rules • Locating Suitable Waste Ares for Road Construction Material Washington Forest Practices Seminars - 1 WAFP or 2 PL Credits Moderator: Paul Hadaller, Pacific Fiber Co. • Washington Forest Practices Permitting: Applying for Permit/Communication with State or County • Temporary crossing over Typed Waters and Long Term Harvest Permits Business Seminar 1 - 1 PL Credit • Final Tier 4 Engines in Forestry Equipment – Operation and Maintenance Moderator: Quincy Powers, Powers Ranch Co. Presenter: Rob Topel, Pape Machinery

Business Seminar 2 – 1 PL Credit • Agile in the Woods – New for 2019 Moderator: Steven Henson, Potlatch Presenter: Wendy Farrand, Consultant Hands-On Seminar 2 – 1 PL Credit • Changes in DOT Truck Regulations You Need to Know About Presenter: David Gray, Glostone Trucking Solutions Open Seminar – 1 PL Credit • Life Flight: LZ, Loading and Capabilities Moderator: Bodie Dowding, ODF Presenter: Troy Speziale, Life Flight Network Business Seminar 3 – 1 PL Credit • Loggers! Don’t Leave Culture to Chance! Moderator: Eric Gehrke, Weyerhaeuser Co. Presenter: Wendy Farrand, Consultant Hands-On Seminar 3 - 1 PL Credit • Feller Buncher Best Practices: Operation, Safety and Maintenance Moderator: Jason Vaughn, Modern Machinery Presenter: Rodney Hunter, Komatsu America Corp.

www.forestnet.com November/December 2018 TimberWest

Updated John Deere E-Series Knuckleboom Loaders

John Deere has introduced its updated E-Series Knuckleboom Loaders. Already known for superior torque and durability, the updated 2019 337E and 437E models feature up to an eight percent boost in fuel economy, ensuring output is maximized and power is not sacrificed. “This update to our E-Series machines allows us to provide an even better solution to our customers, combining power with fuel economy, positively impacting their bottom lines,” said Brandon O’Neal, product marketing manager, John Deere Construction and Forestry.

additional equipment brought to the jobsite. When not in use, the Kelsa loader folds up on the front of the chipper where it’s out of the way, never impeding the discharge chute or limiting access to common maintenance items. www.banditchippers.com

New ASV RT-25 CTL

attachment from engaging too much material at one time. The Battle Ax rotor is optimized for use with all cutting tooth styles. Customers can choose from Quadco planer blades, hard-surface Quadco blades, and carbide teeth. The Battle Ax also features a twostage cutting chamber, which allows material to be cut twice by the rotor and helps produce some of the smallest particle sizes in the industry. The primary shear bar is adjustable for customizing particle size. www.loftness.com

Bandit Offers Remote Controlled Kesla Loaders

The updated 337E and 437E Knuckleboom Loaders still retain all of the features from the original product launch. Each E-Series machine is equipped with a powerful and proven Final Tier 4 engine. Additionally, the E-Series models offer increased swing torque and boom lift compared to the previous series. Other features improve serviceability, including a groundlevel oil drain and filter change, optional electric refill pump and a smaller, 35-gallon hydraulic oil reservoir. All John Deere knuckleboom loaders come standard with JDLink telematics five years in base, offering owners and operators remote diagnostics and streamlined connectivity. www.johndeere.com

Loftness Introduces Battle Ax Mulching Attachment

Loftness has introduced new models of its Battle Ax horizontal drum mulcher designed specifically for skid steers. Featuring a new rotor, tooth design, and exclusive two-stage cutting chamber, the heavy-duty Battle Ax is designed for highly efficient vegetation management, including rightof-way maintenance, land clearing, forestry applications, and more. The Battle Ax is available with 61and 71-inch cutting widths for skid steers with 50 to 120 hydraulic horsepower. Its 17-inch-diameter rotor features built-in depth gauges, which function similarly to raker teeth on chain saws to prevent the 42

ASV Holdings Inc., an industry-leading manufacturer of all-purpose and all-season compact track loaders and skid steers, has introduced the new RT-25 Posi-Track compact track loader. Featuring similar dimensions as its more powerful cousin, the RT-40, the RT-25, at 48 inches wide, serves as an economical alternative for con-

Bandit now offers extending Kesla loaders with radio remote controls on its Intimidator 21XP hand-fed chippers, giving land-clearing professionals, tree care companies, and right-of-way contractors a powerful all-in-one tool to dispose of limbs and even whole trees.

tractors, rental centers, and homeowners working in tight spaces. Its size makes the loader the industry’s smallest sit-in CTL. The RT-25 is also a safer, more productive alternative to walk-behind and stand-on mini loaders in applications such as landscaping, construction, and snow removal. “Despite its small size, the RT-25 is no toy. It includes many of the features that define ASV CTLs and make them productivity-boosting powerhouses, all in an incredibly compact package,” said Justin Rupar, ASV Holdings Inc. vice president of sales and marketing. “We made the machine economical so small- to mid-sized contractors and rental centers can take advantage of its versatility, lightweight qualities, and the ability to get otherwise difficult jobs done quickly.” www.asvi.com

“Rated as a 21” capacity chipper, the 21XP is the largest hand-fed chipper in Bandit’s fleet, so it’s built to chip heavy, large-diameter trees,” said Bandit Sales Manager Jason Morey. “The Kesla loader option increases the productivity of this machine in virtually any application.” The Kesla loader can extend to 21 feet and grab large bundles of limbs, large individual limbs, and even downed whole trees. Using intuitive controls, the operator can guide the material quickly into the chipper to be processed in a fraction of the time it would take operators to winch. This option can eliminate the need for additional workers on the ground or

B-66 L-Series Grinder Unveiled at Rotochopper Demo Day

TimberWest November/December 2018 www.forestnet.com

Rotochopper unveiled the NEW B-66 L-Series horizontal grinder, the latest addition to their line of horizonal grinders, at its annual Demo Day event in September. The B-66 L-Series horizontal grinder is designed to meet the needs of grinding larger, more abrasive feedstock materials and engineered to increase overall production rates with unmatched efficiency. Rotochopper continues to focus on innovation and growth, especially where their customers need additional solutions and (continued on page 44)

March 12-13, 2019 Conference, Richmond, BC, CANADA March 14, 2019, Post-Conference Workshop, UBC Malcolm Knapp Research Forest

DON’T MISS OUT!

There is huge interest in innovative harvesting technology in the Pacific Northwest. This conference offers the opportunity to enable loggers to increase both safety and productivity.

Tuesday March 12th, 2019 Pre-conference Icebreaker

tes d a R e

on count i t ra is s.

ist on d Rate s g Re ngs up nd

Presented by

Thursday March 14th, 2019 Optional post-conference workshop UBC Malcolm Knapp Research Forest

IAL nt sav and G ffer ber C PE ca ird ,o m i

Wednesday March 13th, 2019 One-day Conference and Post-conference Networking

y ece 8 ! nifi ly-b r g r i r S Ea Hu D 1

Information & online registration

www.harvesttechx.events

(continued from page 42) flexibility – and this aggressive, robust, and heavy-duty grinder hits the mark. The lower, longer, and less drag infeed hopper tackles the toughest grinding jobs with ease. A newly designed aggressive powerfeed pulls materials into the grinding chamber effortlessly and the 38” throat opening accommodates some of the toughest material including large logs, whole trees,

ensure consistent efficiency, predict maintenance needs, and reduce downtime. www. rotochopper.com

Wood-Mizer Introduces New Tooth Spacing

and brushy feedstocks. Remote monitoring, through Rotochopper’s RotoLink system, provides reporting and tracking data to

Wood-Mizer introduces two new bandsaw blade options with 1” and 1 ¼” tooth spacing to satisfy the needs of high production, high horsepower resaw and sawmill operations. Available in SilverTip carbon material, 1” tooth spacing blades are offered in a 10degree all-purpose profile to saw any type of wood species. These blades are designed for high production resaw and sawmill operations that prefer 1” tooth spacing or for filing rooms that have blade maintenance equipment currently set up for 1” tooth spacing. Available in SilverTip carbon material, the 1 ¼” tooth spacing blades are offered in a Turbo 7-degree high-performance profile. With increased air flow and higher tooth penetration while sawing mixed species, Wood-Mizer’s exclusive Turbo 7-degree profile is tried, tested, and proven by high production, high horsepower, and high feed rate operations throughout the world. Combine this exclusive Turbo 7 profile with a wider 1 ¼” gullet to provide an ideal blade for high throughput grade resaw and sawmill operations. www.woodmizer.com

Solesbee’s Excavator Stump Puller Features Replaceable Wear Tips

Solebee's, offers its excavator stump puller for efficient stump removal and land clearing. Solesbee’s manufactures the attachment with high-strength alloy steel

and replaceable wear tips for extended service life. The powerful attachment, known as the “Stumper,” fits 15- to 40-ton excavators and the company says can increase production by as much as 30 percent compared to other land-clearing methods, such as bucket attachments, bulldozing and forestry mowing. www.solesbees.com TW 44

TimberWest November/December 2018 www.forestnet.com

CALENDAR January 15-17 Associated California Loggers 46th Annual Meeting, Reno NV 916-441-7940, www.californialoggers.com January 16-18 76th Annual Truck Loggers Association Convention, Vancouver, BC 604-684-4291, www.tla.ca January 17-19 Associated Oregon Loggers’ 49th Annual Convention, Eugene, OR 503-364-1330, www.oregonloggers.org February 4-7 Association of Equipment Distributors (AED) Summit, Orlando, FL 800-388-0650, www.aednet.org February 6-8 18th Ann. Forestry Forum, Coeur d’Alene, ID 208-883-4488, www.forestersforum.com February 6-8 Lumber & Building Materials Expo 2019, Boston, MA 518-880-6360, www.lbmexpo.com

AD INDEX COMPANY PG# CANNON BAR WORKS.................................... 11 CATERPILLAR................................................. 19 DIAMOND MOWERS....................................... 18 GEM CHAIN.................................................... 36 HARVESTTECHX............................................. 43 HUSQVARNA.............................................20-21 JOHN DEERE.................................................. 17 JORAL LLC.................................................... 30 KETO HARVESTERS........................................ 27 LBX / TRIAD / BEJAC...................................... 31 LOG MAX....................................................... 37 MORBARK.............................................. 13-DEC OLOFSFORS................................................... 23 PAPE MACHINERY.......................................... 25 PETERSON..................................................... 33 PONSSE........................................................... 2 PROLOGIC+..................................................... 8 QUADCO TEETH............................................. 34 SENNEBOGEN.................................................. 9 SIERRA CASCADE CONFERENCE.................... 44 SIGNODE INDUSTRIAL GROUP........................ 11 SOUTHSTAR..................................................... 5 TIGERCAT / TRIAD MACHINERY....................... 47 TIMBERPRO / MODERN MACHINERY............... 35 US FORESTRY DISTRIBUTORS........................ 29 WALLINGFORD'S............................................ 28 WARATAH...................................................... 48 WAY MACHINE............................................... 24 WHITE MOUNTAIN CHAIN............................... 10 CALENDAR JANUARY.............................KOMATSU AMERICA FEBRUARY.................................... CATERPILLAR MARCH............................................. PETERSON APRIL..................................... LBX/TRIAD/BEJAC MAY......................................................QUADCO JUNE.............................FEENAUGHTY/KOBELCO JULY.............................................SENNEBOGEN AUGUST................................NELSON PAINT CO. SEPTEMBER................................... SOUTHSTAR OCTOBER........................................HUSQVARNA NOVEMBER........................................... PONSSE DECEMBER..........................................LOG MAX

SUBSCRIPTION CARD New, Renewal & Change of Address Name: ___________________________________________________________ Title:_____________________________________________________________ NOVEMBER/DECEMBER 2018

Company:_________________________________________________________

READER VERIFICATION

Address:__________________________________________________________

The U.S. Postal Service requires readership verification at specified intervals. Please assist us by providing the information below.

City, State, Zip:______________________________________________________

Circle your Primary Business (enter one number) 1A Logging firm or contractor 1B Trucking company 1C Cutting contractor 1D Road builder/materials producer 1E Combined logging/processing forestry 2A Forest mgmt/government 2B Broker/consultant 3A Sawmill/chip mill 3B Veneer/plywood/panel mills 3C Pulp/paper mill 3D Specialty wood products 3E Biomass/Wood Energy Plant 4A Equipment manufacturer 4B Equipment distributor/dealer 6A Associations 6B Ad agency 6C Other 7 Forestry consultants 8 Education/Student/Library 9 Tree farming

Phone:____________________________________________________________ Fax:______________________________________________________________ Email:____________________________________________________________ Website:__________________________________________________________

Change of Address & Renewal Subscriptions Please send BOTH old information and new changes to: TimberWest Magazine, P.O. Box 610, Edmonds, WA 98020 Fax: (425) 771-3623 • subscribetw@forestnet.com • www.forestnet.com ____________________________________________________________ signature date A signature and date is required on all renewals and new subscriptions.

NEW Subscriptions If you’re in the Western U.S. timber industry your subscription is FREE. All others... see below. Send payment or request to: TimberWest Publications, P.O. Box 610, Edmonds, WA 98020 Subscription is for: m One Year $22.00 m Two Years $38.00 Washington Residents add 9.5% sales tax

Payments can also be processed by PayPal. Contact timberwest@ forestnet.com for instructions.

m Canada $35.00 m All Other $40.00 per year in U.S. funds

www.forestnet.com November/December 2018 TimberWest

guest columnist

Cutting Edge Technology Defining Tomorrow By Jack Petree

ccording to Matthew Flood,

John Deere’s ForestSight product manager, “Successful businesses in the future will truly be defined by how well technology and telematics capabilities are leveraged by customers and integrated into day-to-day decisions in the business.” Flood works at the cutting edge of what he calls, “a new era” in machine operations in the forest, an era enabled by telematics. Telematics involves the gathering of machine information, data, and metrics and the sharing of that information to a central location for viewing and analysis. Flood points out that analysis, when leveraged and followed by appropriate action, can result in significantly reduced machine downtime, reductions in non-productive run time on the machine, diminished fuel burn, decreased maintenance costs, and more efficiently accomplished harvests; in general, an enhanced ability for machine owners to fine tune an entire operation with a view towards the optimization of the potential for profitability. In the recent past, Flood puts forward, “A person might have perceived machine telematics as simply providing critical feedback about machine locations, working hours, and fuel burn.” Today, he continues, “Our machines are doing more than just sending information to a remote server, they are truly becoming ‘connected’ to our world. A customer can view information about the machines available at his or her fingertips from a location on the opposite side of the world. Dealers and technicians can remotely monitor and connect to machines and initiate data collection on demand, based on triggers such as machine alerts or fault codes.” Analysis of the data can then be utilized to reduce costs by avoiding unnecessary expensive repairs, multiple trips by a service technician who can remotely diagnose machines before leaving for an on-site visit, or any one of a variety of other problems capable of eating up cash.

The Key Is Leveraging

Telematics is not just for the large-scale

operator according to Flood. “All contractor sizes can benefit from the information provided through telematics whether that business has two or three machines or 30plus machines,” he contends. “The key is leveraging telematics’ capabilities to increase your bottom dollar.” By way of example, Flood mentions, “One of the best ways to leverage telematics is to increase your bottom dollar through managing or limiting idle time on the machines. Traditionally, a machine could idle between 10-20 percent of the hours that it’s utilized through a given week/month/year. Now one could argue that the savings in fuel alone is quite minimal. However, look at the larger picture: a machine that idles 20 percent of an annual accumulation of 1,000 hours just spent 200 hours sitting at idle rather than being productive. Those 200 hours not only resulted in a loss of production but also contributed to a faster degradation of both warranty and, potentially, resale value. Tracking

of fuel burn and machine utilization metrics could also point to training requirements, improper operation by an operator, or potential machine maintenance requirements.”

Minimal Training

Telematics does not, Flood says, generally require much in the way of operator training. “From the telematics standpoint,” he comments, “an operator is basically hands-off, and the data flow is autonomous. I would say, however, it is important for an operator to understand that some of the metrics about the machine could be monitored by a business owner or job site foreman.” Machine operators can also benefit from the use of telematics. According to Flood,

TimberWest November/December 2018 www.forestnet.com

Matthew Flood telematics has the potential to lessen the stress placed on an operator over the course of a work day. He explains, “As we team [with owners and operators] and gather more information from our machines, we are developing and finding new ways to help operators be more productive through the long days.”

Communication Is Key

Flood contends that the most important factor in successfully utilizing telematics to best benefit an operation is the building of a strong relationship between the contractor and the dealership. “The strategic part, and really the key [of introducing telematics to an operation] is to leverage and discuss the machine information after a demo of an appropriate duration,” Flood comments. Working with the dealership’s experts, the contractor can directly relate to the information provided through telematics that is appropriate to his or her specific application; the dealership and the contractor thus learn together how telematics can best be utilized to the fullest extent in the contractor’s own specific operation. Flood’s best piece of advice to a contractor either using, or considering the use of, telematics? Build those strong partnerships with your dealership around telematicsenabled features. “Experts at dealers are on staff and are trained to monitor machine information and trends necessary for troubleshooting long before a customer knows there could be an issue with the machine. This leads to preventative maintenance potential and the reduction of machine downtime through proactive decision making.” TW

X870D/LX870D

CONFIDENCE BY DESIGN. Fuel efficient and powerful, the 870D series feller bunchers provide skilled operators with the machine performance required to tackle the most challenging terrain. Tigercat’s ER technology and closed loop drive system delivers unmatched speed and response. The rock solid leveling base and longer track frames provide excellent stability on steep slopes. An upgraded cab offers better visibility with expanded sight lines. The optimally positioned skyVIEW and rearVIEW camera systems allow for maximum visibility and productivity. Contact your closest Triad Machinery location to learn more.

WWW.TRIADMACHINERY.COM

PORTLAND, OR 503.254.5100

SEATTLE/TACOMA, WA 253.722.5560

EUGENE, OR 541.342.7700

SPOKANE, WA 509.534.1900

BEND/PRINEVILLE, OR 541.447.5293

MT VERNON, WA 360.488.3948

Circle Reader Service Card 131

www.tigercat.com

Circle Reader Service Card 132