Issuu

Turning Challenge into Opportunity TimberLine Logging

Keep it Simple

Barnes and Sons Logging

Any Job is Possible Pulley Logging

Circle Reader Service Card 101

ON THE COVER

July/August 2014 Vol. 39 No. 07-08

Photo by Lindsay R. Mohlere at a TimberLine Logging operation. TimberLine is headquartered in Sweet Home, Ore.

Turning Challenge into Opportunity

Pacific Logging Congress Official Show Guide Information on the 7th Live in the Woods Show

Ted Hufford, owner of Timberline Logging always knew going in it wasn’t going to be easy.

Any Job is Possible Pulley Logging of Sedro Woolley takes on anything from thinning to helicopter logging.

Keep it Simple

Keep it Simple Barnes and Sons Logging in Lewis County, Wash., has that “Go for It” spirit

Turning Challenge into Opportunity

Time for Congress to Improve the Health of Forests

Any Job is Possible

Guest Column, Nick Smith, Executive Director of Healthy Forests, Healthy Communities.

DEPARTMENTS

Page 4 .............................................................In the News Page 44 ..................................................... Machinery Row Page 46 ......................................Wood Biomass Column Page 54 ...................... Tech review - portable grinders Page 60 ................................................. Association News Page 62 ........................................................ New Products Page 65 .................................................Advertiser’s Index Page 65 ............................................... Calendar of Events Page 65 ................................................. Classified Section Page 65 ............................Subscription/Reader Service

Time for Congress to Improve the Health of Forests

www.forestnet.com July/August 2014 TimberWest

Springfield Mill Burns

Although more than 100 firefighters battled the fire at the Springfield Plywood and Veneer mill in Springfield, Ore., they were unable to save it. The 33-acre mill is one of four wood products mills in Oregon owned by Swanson Group Mfg LLC, a family-owned business based in Glendale. The fire put 250 employees out of work. Some will find work within the Swanson Group Mfg. company. A week after the fire, Chuck Wert, the chief operating officer of Swanson Group, stated, “As I understand it, we spoke with around 60 employees today, and about 40 of them say they are interested in looking at the other job opportunities we have for them in Roseburg and Glendale.” Current reports estimate it will be approximately a year before the mill is back in operation.

Trees Save 850 Lives Per Year

The Daily Digest News reported that trees are saving lives. When researchers estimated the direct impact tress have on air pollution and human health in the U.S., the results were startling. Trees improved air quality in the states by one percent. According to the study, that one percent improvement prevents 850 premature deaths and 670,000 incidents of acute respiratory symptoms while saving $7 billion in health care spending. For more details on the study, visit http:// dailydigestnews.com/2014/07/trees-save850-lives-per-year-says-national-forest-service

New Idaho Forest Practices Rule

The new shade rule, approved by the Idaho House and Senate Natural Resource Committees in January 2014, was signed by

Scientific Report Reveals Causes of OSO Mudslide

the governor and went into effect on July 1, 2014. The new rule is based on actual Idaho riparian data and allows landowners and managers the flexibility to choose from two defined options. One option allows some harvesting throughout the 75-foot (each side) Stream Protection Zone (SPZ), while the other option allows greater harvests in the outer 25 feet of the SPZ if more trees are left next to the stream. The Idaho Reporter

USFS Awards Nearly $2.3 in Grants to Help Community Forests

The U.S. Forest Service announced nearly $2.3 million in grants to help communities in eight states secure community forests. The Community Forest Program (CFP) provides many benefits such as places to recreate and enjoy nature and environmental benefits such asprotectinghabitats and water quality. The CFP can also provide economic benefits through timber resources. The grants will be matched with an additional $4.9 million in funding from other partners on the projects. The projects funded in the West included: $400,000 to Humboldt Community Forest in California. Humboldt County will acquire a 400-acre redwood community forest in Northern California. $400,000 to Alvord Lake Community Forest in Montana. The Vital Ground Foundation will create a community forest that will protect 142 acres of forested land located approximately two miles from the City of Troy in Lincoln County, Mont. This project will build upon existing educational and recreational opportunities and will guarantee public access while providing demonstration projects for forest management. TW

The in-depth, scientific report on the causes of the OSO mudslide, which took place in March 2014, is now available. The report comes from a team of university and private-sector researchers as part of GEER (Geotechnical Extreme Events Reconnaissance), a National Science Foundation-funded initiative to quickly dispatch scientists to evaluate natural disasters. The report doesn’t provide a reason why the landslide happened that particular day, but it does describe the chain reaction that took place to create it. To learn more about the report, visit http://www.geerassociation.org/GEER_Post%20 EQ%20Reports/Oso_WA_2014/index.html 4

TimberWest July/August 2014 www.forestnet.com

Editor: Diane Mettler, diane@forestnet.com Copy Editor: Beth Szyperski Contributing Editors: Lindsay R. Mohlere, Clayton Petree, Andrea Watts, Barbara Coyner ––––––––––––––––––––––––––––––––––––––– Sales Mgr: James Booth – jbooth@forestnet.com Director: Rob Stanhope – stanhope@forestnet.com Sales Contact Information: Toll Free: 1-866-405-6462 Phone: (604) 990-9970 • Fax: (604) 990-9971 ––––––––––––––––––––––––––––––––––––––– Publisher & Production Manager: Sheila Ringdahl – sringdahl@forestnet.com Office Manager: Betty Rosales – brosales@forestnet.com Corporate Office Information: Phone: (425) 778-3388 Fax: (425) 771-3623 timberwest@forestnet.com www.forestnet.com Send all materials - Insertion Orders, Contracts, Copy, Photos, Disks to: TimberWest Publications, LLC P.O. Box 610 (300 Admiral Way, Suite 105) Edmonds, WA 98020-0610 ––––––––––––––––––––––––––––––––––––––– Send both OLD and NEW Circulation information to: TimberWest Magazine Attn: George Aldridge P.O. Box 610, Edmonds, WA 98020 Fax: (425) 771-3623 • subscribetw@forestnet.com ––––––––––––––––––––––––––––––––––––––– Advertising created by TimberWest Publications, LLC is the sole property of TimberWest Publications, LLC and may not be copied or reproduced without the express written permission of the publisher. PUBLISHER’S EDITORIAL STATEMENT: TimberWest reports on the logging and lumber segment of the forest industry in the Western United States with emphasis on the states of AK, WA, OR, ID, MT and CA, providing current information on timber harvesting techniques, sawmill operations, news, legislation, events, people and products pertinent to this market. TIMBERWEST (USPS #024858) is published bi-monthly (Jan/Feb, Mar/Apr, May/Jun, Jul/Aug, Sept/Oct, Nov/Dec) by TimberWest Publications, LLC, 300 Admiral Way, Suite 105, Edmonds, WA, 98020. Periodicals postage paid at Edmonds, WA and at additional mailing offices. Copyright 2014. All rights reserved. Subscription rates to qualified subscribers are Free and all non-qualified subscriptions in U.S. are $22 per year payable in advance. Canada $35 (U.S.). Other $40 (U.S.). Single copies paid in advance $4. Company affiliation, title, date and signature must appear on subscription forms. Publisher reserves the right to refuse non-industry subscriptions and advertising. All other advertising is accepted at the discretion of the publisher. Publisher does not assume any responsibility for the contents of any advertisement and all representations or warranties made in such advertising are those of the advertiser and not of the publisher. Back issues, if available, $4 each. Directory and Calendar issue $10 each. Canadian Publication Mail Product Sales Agreement #40740074. Return Undeliverable Canadian Addresses to P.O. Box 86670 Stn. Main, North Vancouver, BC V7L 4L2 Printed in Canada at Rhino Print Solutions POSTMASTER: Please send address changes to TimberWest, P.O. Box 610, Edmonds, WA, 98020-0610

Out here, there’s no such thing 1 as downtime. Keep your operation going with genuine Cat® undercarriage, made specifically for your demanding forestry work. We’re built to help do your toughest jobs. Contact your Cat dealer today or visit http://www.cat.com/forestry

Join us Sept. 25-27 in Mollala, Oregon, for the PACIFIC LOGGING CONGRESS 7TH IN THE WOODS SHOW.

© 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Circle Reader Service Card 102

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Welcome to the

Pacific Logging Congress’ 7th In-the-Woods Show

Tell me and I will forget. Show me and I may remember. Involve me and I will understand.

(Chinese Proverb)

ewer and fewer Americans realize where the eggs for their omelets came from. The same is true for the lumber to build the tree house in the backyard. We need to get them involved in order for them to have a better

Duane Evans, photo by Mary Bullwinkel

TimberWest July/August 2014 www.forestnet.com

understanding of the forest products industry along with the men and women who work in it. With today’s social media sites, we can learn many things about the world around us. We can learn how to change the oil in our car or truck. We can research where to spend our next vacation. The problem is we don’t always know how the story may have been embellished to reinforce the author’s political position or personal beliefs. The “In the Woods Show” gives the forest products industry an opportunity to get individuals involved. Through involvement, we create possibilities for education and understanding. The industry needs a venue like this to tell our story along the guided interpretative trail. During our three-day event, visitors will have opportunities to gain a better understanding of new technologies and how they are applied throughout the forest products industry. Visitors will also witness these technologies in action, as a variety of forest management activities will be in progress. Our goal is to provide a safe, fun, and educational experience for the thousands of children, teachers, logging contractors, and land managers in attendance. With the arena style format, visitors will be able to view multiple manufacturers from a single viewpoint. The Pacific Logging Congress’ mandate of education will be on full display at this event. Our tour guides will cover several aspects of forest management including the protection of water, air, wildlife habitat, and

recreation enhancement. Logging contractors will also have an opportunity to earn professional logger credits by attending onsite seminars. I invite you to get involved by attending the Pacific Logging Congress’ In the Woods Show September 25-27, 2014, and develop a better understanding of how a healthy forest is managed for a variety of products. The show site will be at a new location on Port Blakely Tree Farms’ property near Molalla, Ore. Make plans today to bring a friend and embrace this sustainable, renewable resource that our forests provide. See you there! Duane Evans 2014 PLC President

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

2014 PLC Woods Show Sponsor List Platinum

GOLD Bearhaven Consulting Cascade Trader Don Ming Logging Joel Olson Trucking Inc. Peterson Pacific Corporation Ritchie Bros Auctioneers TimberWest Magazine Prinoth Corp / CMX Industries

SILVER Associated Oregon Loggers Inc. HM Inc Oregon OSHA Western Forest Products

BRONZE Advance Drainage System Interfor, Molalla,Oregon Molalla Fire Department Oregon Department of Forestry Oregon Department of Transportation Pape’ Machinery Troy’s Diesel Repair Walsh Trucking

Circle Reader Service Card 103

www.forestnet.com July/August 2014 TimberWest

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

In Appreciation A thank you from PLC Executive Director Rikki Wellman

he list is long when it comes to thanking everyone who

participated in making the 7th annual In the Woods Show of the 105th Annual Pacific Logging Congress a resounding success. The teamwork involved in coordinating an event this large is monumental; it takes dedication, a profound interest in the industry, and backbreaking effort to reach fruition. As planning initiated for this event, we realized adjustments were needed to make this year’s show another success. Therefore, a new layout was formulated and presented to several manufacturers and distributers. They quickly expressed their support and eagerness to get started. We have great appreciation for all exhibitors involved in this process and know it would not be possible without their participation. We thank all our sponsors for your continued support! Without the woods, there is no In the Woods show. Many thanks to Port Blakely Tree Farms who donated the use of this site located just outside of Molalla, Ore. Their generosity has enabled us to expose thousands of youngsters, logging professionals, forestry managers, equipment providers, and the general public to the latest techniques and machinery the industry has to offer. This is a unique opportunity to experience the logging industry from the inside out. I extend a genuine “thank you” to Port Blakely Tree Farms, Oregon Forest Resource Institute, the many volunteers, and the PLC Board of Directors, members, and staff. Also, a special “thank you” goes out to the thousands of people who were interested in our profession and took the time to learn more about what we do and why. We are thankful to be part of this great profession! Thank you on behalf of the PLC officers and Board of Directors.

Circle Reader Service Card 104

TimberWest July/August 2014 www.forestnet.com

Circle Reader Service Card 105

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Professional Logger Credits

ighly skilled professionals are the backbone of the timber industry. They not only set the standard for excellence, but are looked to for their knowledge of the most current rules, regulations, and techniques. The 2014 the Pacific Logging Congress will provide attendees the opportunity to earn up to 8 Professional Logger credits. During the live in the woods show there will be several seminars presented by industry professionals. Two Extra Credits

You can also earn two extra credits just for attending the PLC Live in the Woods show.

TimberWest July/August 2014 www.forestnet.com

Planning Your Classes

For more information on the seminars, please turn to page 16. There you find out topic, instructors and the maximum credits you will be able to earn during the show. These credits are applicable toward Professional Logger’s Certification and fulfillment requirements as outlined in the Sustainable Forest Initiative. Individuals attending seminar will sign in at the end of each seminar.

Circle Reader Service Card 106

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

TENTATIVE PROGRAM AND AGENDA (DETAILS, LOCATION AND TIMES SUBJECT TO CHANGE)

TUESDAY, SEPTEMBER 23, 2014 6p.m

Oregon Garden Resort, Silverton, Oregon Pacific Logging Congress Board Meeting Directors Only

WEDNESDAY, SEPTEMBER 24, 2014 TRAVEL TO SHOW

THURSDAY, SEPTEMBER 25, 2014 DEMO SITE – LOGGER EDUCATION SEMINARS AND GENERAL ATTENDANCE DAY 7a.m.-4p.m. 8a.m.-4p.m. 8a.m.-3p.m. 9a.m.-2p.m. 4p.m. 5p.m. - 7p.m.

Off Site Parking and Shuttle Site In The Woods Show Open Onsite Registration Schools Education Day Tours SHOW CLOSED Oregon Garden Resort, Silverton, Oregon Orchid Room Seminar - Family Succession Planning Sponsored by Peterson Cat This session is designed to help family business owners understand the connections, and contrasts, between family and business. Owners will discover ways to build a strong foundation for growth and succession. In addition, we will present strategies to limit liability and tax impact to ensure a successful transition of ownership to the next generation. Moderator - Duane Doyle Jr, Peterson Cat, Portland, Oregon Sherri Noxel, PhD, Director, Austin Family Business Program, Corvallis, Oregon John M. Nygaard Jr., Lawyer, John M. Nygaard LLC, Portland, Oregon This Seminar qualifies for 2 Pro Logger Credits 7:30p.m. - 8:30p.m. Meet and Greet - Sponsored by Peterson Cat

FRIDAY, SEPTEMBER 26, 2014 DEMO SITE – LOGGER EDUCATION SEMINARS AND GENERAL ATTENDANCE DAY 7a.m.-4p.m. 8a.m.-4p.m.

Off Site Parking and Shuttle Site In The Woods Show Open

TimberWest July/August 2014 www.forestnet.com

8a.m.-3p.m. Onsite Registration 9a.m.-2p.m. Schools Education Day Tours Logger Education Seminars Earn 1 Pro Logger Credit Each 9:30a.m.-10:30a.m. Machine Maintenance & Inspection Seminar Sponsored by Pape’ Machinery Jimmy Carter, Equipment Failure Analysts Pape’ Machinery, Eugene, Oregon Lane Kling, Senior Technical Instructor Pape’ Machinery, Eugene, Oregon This Seminar qualifies for 1 Pro Logger Credit 11a.m. - 1p.m Sedimentation Control Seminar - Sponsored by PLC Jeff Hepler, Stewardship Forester Oregon Dept. of Forestry Dave Robert, Forest Engineer Port Blakely Tree Farms Mike Reardon, Geo Synthetic Expert Advanced Drainage Systems This Seminar qualifies for 2 Forest Practices Credits 1:30p.m. - 2:30p.m. Walk Around Loaded Log Truck Level 2 Inspection Brian Queen, MCTD Compliance Specialist Oregon Dept. of Transportation Todd Raska, MCTD Compliance Training Div. Oregon Dept. of Transportation This Seminar qualifies for 1 Pro Logger Credit 4p.m. SHOW CLOSED 6:30p.m. Oregon Garden Resort, Silverton, Oregon Orchid Room Logger’s Barbecue and Pacific Forest Foundation Education Auction Tickets required for this event See Registration form to order tickets

SAFETY FIRST! CLOSED TOE SHOES OR BOOTS ONLY - NO SANDALS OR FLIP FLOPS WILL BE ALLOWED ON SHOW GROUNDS!

SATURDAY, SEPTEMBER 27, 2014 DEMO SITE – LOGGER EDUCATION SEMINARS AND GENERAL ATTENDANCE DAY 8a.m.-1p.m. 1p.m.

Circle Reader Service Card 107

All Exhibits Open FREE to the public SHOW CLOSED

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

What’s on the Menu

You won’t go hungry at this year’s PLC show. Three different vendors will be offering food around the clock. Smokey Bones BBQ

A mobile BBQ and smoker, Smokey Bones serves pulled pork sandwiches, smoked Kielbasa sausage, and beef brisket. The meal is finished off with the company’s homemade sauce as well as their delicious coleslaw and ranch style beans. Lemonade, sodas, and water are available.

Thelma’s Grub Tub

Thelma’s offers a breakfast selection and a variety of sandwiches made on a great pub bun for lunch. You get to pick the garnish

and type of cheese that goes on your sandwich. Ice cold drinks are also available. If you have a sweet tooth, they offer a small selection of “from-scratch” baked goods.

Coffee in Motion (Onsite Coffee Vendor)

Coffee in Motion is a full espresso and smoothie bar serving up hot, iced, and blended espresso drinks, coffee, Chai, Italian cream sodas, and Red Bull fruit smoothies. They use quality local products and organic wood-roasted coffee beans.

Circle Reader Service Card 108

Lupita’s Restaurant

We are a full service restaurant with a tacos stand right outside as you would see in Mexico. We been in business for 14 years and still going strong. We also offer a mobile service for any type of event from birthday parties to weddings.

Circle Reader Service Card 109

www.forestnet.com July/August 2014 TimberWest

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

PLC — Yesterday and Today

he 2014 Pacific

Logging Congress’ live In the Woods Show is just around the corner. While the demos are always captivating and entertaining, they are only one facet of the organization’s repertoire.

History

PLC was established in 1909 with a membership drawn from loggers, mill owners, manufacturers, and equipment dealers representing 250 companies throughout the western United States and British Columbia. Many non-members also participate in its programs showcasing both equipment displays and conventions where the newest machinery and supplies have been exhibited and demonstrated. Conference topics have historically covered subjects ranging from safety and political issues impacting today’s harvest, to the utilization of new methods, sound forest management, and the latest techniques for increased productivity.

Focus on Education

A major focus of today’s PLC is education, not only of our logging community but school children and instructors as well. It Takes a Tree. There has been resounding success with the introduction of the It Takes a Tree curriculum that includes a full-color, 32-page brochure about forestry and logging. Accompanied by a 17-minute video, this well rounded production is now in the hands of more than 15,000 science educators in the Northwest, with separate versions distributed in British Columbia and the U.S. Following close on the heels of the video, a DVD series was co-produced by PLC, Washington Contract Loggers, and Interactive Training Media, Inc. The DVD is customized for each venue of distribution.

Logger Credits

This year, loggers will have the opportunity to earn up to eight professional logging credits. Topics cover family succession planning, safety, sedimentation control, and more. 14

TimberWest July/August 2014 www.forestnet.com

This steam donkey was on display at the 2001 PLC. It was manufactured by Willamette Iron & Steel Works of Portland, Ore, serial number 1463, was sold to Dover Lumber Co. in 1917 and was designed for road building.

Educational Tours

PLC will host 2,500 Portland and Southwest Washington teachers, students, and parents on September 25 and 26. Since its first show in 1989, PLC has hosted 14,000 students. Teachers, students, and parents will once again have a first-hand opportunity to see the value of our industry.

Career DVD

The Pacific Forest Foundation (PLC’s education wing) produced a much needed “careers” DVD titled “This Is My Office.” The DVD was unveiled at the 100th Celebration of the PLC in November 2009. Not only has it been well received by colleges and high school career counselors, it recently received the Silver Telly, which is the highest level you can receive — an international competition that recognizes the work of media professionals in the Advertising, Broadcast, Online, and Multimedia fields.

PFF Scholarship Program

In 2012, PFF established a scholarship program. Scholarships are awarded to students who are studying in the forest products industry or related areas of study. To date, PFF has awarded $25,000 in scholarships.

The Ultimate Reality Show — Live Demo

In addition to regular conventions or congresses, the Pacific Logging Congress holds an In the Woods Show every four to five years. This provides an opportunity for equipment manufacturers and dealers to not only exhibit their machinery, but also present an on-the-ground, working retrospective on hand-selected sites (five to seven acres), allowing attendees to witness actual operations under real working conditions. In addition to the logging operations, there are also static displays and booths to view state-of-the-art technology throughout the industry. During this three-and-a-half-day event, Congress attendees will be transported by bus to the logging sites to view the safest, most effective, and environmentally advanced techniques available. Food and refreshments will be available, as will literature covering every aspect of this grand display. With over 100 years under our belts, PLC is confident that the In the Woods Show will be an unforgettable experience for everyone.

THE NEW 625C

It’s everything you had in mind. When we set out to build the most innovative head on the market, we turned to the real experts: you. Input from real-world loggers drove the creation of this high-performance 625C harvesting and processing head that delivers the ultimate in productivity, durability, and serviceability. When it comes to feed performance it easily handles 35” wood and has exceptional tree control and delimbing with twin bottom delimb arms. It’s complemented by a continuous 360-degree rotation option making wasted motion a thing of the past. Other features include a 3/4” main saw with auto tension, a 3/4” top saw, and smart maintenance features that reduce downtime and improve serviceability. This head will help maximize your productivity. So much like you, this Waratah is built to work.

www.waratah.net Waratah USA, Kelso, Washington US 866-636-2650

Waratah USA, Peachtree City, Georgia US 770-692-0380

Circle Reader Service Card 110

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Four Unique Seminars Thursday & Friday

ttendees who want to take advantage of the other educational credits offered can attend the seminars listed below (one on Thursday evening, Sept. 25, at the Oregon Garden Resort and three on Friday, Sept. 26, at the PLC show site). If you attend all the seminars, you can earn a total of eight credits. Family Succession Planning Where:

Held at Oregon Garden Resort Orchid Room When: Thursday, Sept. 25 5:00 p.m.-7:00 p.m. Hosted by: Peterson Cat and Caterpillar This seminar will be presented by Sherri Noxel, PhD, Director of the Auction Family Business Program at Oregon State University, and John Nygaard Jr., Estate Planning Lawyer in Portland, Ore. Attendees of this seminar will receive two Professional Logger Credits. Please sign the attendance sheet at the end of the seminar.

Operator Walk-around Demonstration Where:

John Deere/Papé Exhibitor Tent Full Tree Active Site Area When: Friday, Sept. 26 9:30 a.m. to 10:30 a.m. Hosted by: Papé Technical Center This seminar will be presented by Jim Carter, New Products Engineer and Manager of Papé’s Technical Center, and Lane Kling, Senior Technical Instructor, Papé Machinery. Attendees will receive one Professional Logger Credit. Please sign the attendance sheet at the end of the seminar.

Sedimentation Control Where: When:

Static Site (See map) Friday, Sept. 26 11:00 a.m. to 1:00 p.m. Hosted by: Advance Drainage Systems, PLC, Port Blakely, and ODF This seminar will be presented by Jeff Hepler, Stewardship Forester, Oregon Dept. of Forestry; Dave Robert, Forest Engineer,

TimberWest July/August 2014 www.forestnet.com

Port Blakely Tree Farms; and Mike Reardon, Geo Synthetic Expert, Advance Drainage Systems. Attendees will receive two Forest Practices Seminars or two Professional Logger Credits. Please sign the attendance sheet at the end of the seminar.

Level 2 Walk-around Loaded Log Truck Inspection Where: When:

Static Site (See map) Friday, Sept. 26 1:30 p.m. to 2:30 p.m.

Hosted by: Oregon Dept. of Transportation (ODOT) and Weyerhaeuser Co. This seminar will be presented by Brian Queen, MCTD Compliance Specialist, ODOT; Todd Raska, MCTD Compliance Training Div., ODOT; and a representative from the Weyerhaeuser Company. Attendees will receive one Professional Logger Credit. Please sign the attendance sheet at the end of the seminar.

Circle Reader Service Card 111

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

PLC Auction and Loggers´Barbeque Get ready for a big barbeque with all the fixings

fter a long day in the woods, the PLC will hold its Auction and Loggers’ Barbeque at the Oregon Garden Resort on Friday, September 26. Enjoy hosted beer and wine while visiting with friends. It’s just $50.00 a head for this “come as you are” shindig. PLC President Duane Evans says the PLC’s goal is for everyone to feel comfortable, at home, and be able to relax after a hard day’s work. Auction Items

After you’ve had your fill of BBQ, browse the display of auction items available for the silent and live auctions managed by Ritchie Brothers Auctioneers, in support of the Pacific Forest Foundation education programs. Auction proceeds will help fund In the Woods Show Tours’ It Takes a Tree curriculum, “This Is My Office” DVD, the PFF Scholarship program, and other nonprofit programs. Items donated for the auction this year

TimberWest July/August 2014 www.forestnet.com

include 2015 NASCAR racing tickets, seven nights on Maui (up to $1,000 for airfare), 2015 Seahawk tickets, Le Vieux Pin Equinoxe Merlot 2008 Magnum (1.5 liter) Plus a private guided tour and tasting of the Vieux Pin Winery in Oliver, British Columbia, an overnight stay at the Oregon Garden Resort, a hand-crafted wooden rocking cradle, a carved toothpick holder, an authentic Coach handbag, a beautiful Fire & Light glass bowl, autographed chrome blade axe signed by Mike Pihl . . . and that’s just a taste. There’s much, much more! Come on over to the Oregon Garden Resort, relax, and pull up a stump. For only $50 per person, you can’t beat an evening of entertainment like this. We look forward to seeing you! To order your tickets for this fun and laid back evening, visit www.pacificloggingcongress.com or call the PLC for more details at (425) 413-2808. Here’s just a few of the items that will be at the 2014 Auction:

• Caterpillar - 2015 NASCAR Season; two tickets and other special amenities (Race to be determined by Caterpillar and lucky bidder.) • Todd Gordon - Hand-crafted rocker cradle • WD Moore Logging - Le Vieux Pin Equinoxe Merlot 2008 Magnum (1.5 liter) Plus a private guided tour and tasting of the Vieux Pin Winery in Oliver, British Columbia • Murray Pacific Corp - Seven nights at the Wailea Resort on Maui, Hawaii (includes up to $1,000 in airfare) • Murray Pacific Corp - Four Seattle Seahawks football tickets for the 2015 Season • Mary Gordon - Tea basket • Todd Gordon - One-of-a-kind toothpick holder • Oregon Garden Resort - One room for one night • Mike Pihl Logging - Autographed ax signed by the Ax Men • Doris and Jim Wark - Authentic Coach Handbag • Joel Olson Trucking and DSU Peterbilt Hostess Gift Basket • “Fire & Light” Glass Bowl

Circle Reader Service Card 112

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

In the Woods Education Day

tudents in grades four through 12 will have the experience of a lifetime when they attend the educational In the Woods field trip, September 25 and 26, at the Port Blakely Tree Farms’ site in Molalla, Ore. A volunteer tour guide will lead classes of students along the trail through the education stations. These stations include: • The Wildlife Station. Will allow students to see how managed forests benefit wildlife and protect habitat. • The STEM (Science, Technology, Engineering, and Math) Station. Focuses on the skills used to actively manage a forest before harvesting occurs. Class groups will be seeing an active harvest operation. This station will give students insight into the choices and careers that are part of the growing and planning that takes place before a harvest. • The Trees 101 & Oregon Wood Products Station. Will help connect students with Oregon tree species and products. Handson manipulation activities featuring forest products and wood species/tree identification will help students establish a relationship between the trees in the forest and the products they use in their daily lives. • The Logging Sports Station. Will provide an opportunity for high school

forestry programs and College of Forestry students to be an active part of PLC and showcase these sports to a wide variety of audiences. • The Forest Recreation & Fire Safety station. Will promote stewardship and fire safety when students are in Oregon’s forests. A mock campsite will be set up featuring a variety of recreational activities that take place in the woods. • The Tree Planting & Protecting Oregon Forests Station. Provides exposure to Oregon Forest Protection Laws and the people who enforce them. Reforestation is a key message, and the primary activity will be for each class to plant one tree. • The Bus Loading Area. Will be staged with equipment to give the students an up close look and a final hands-on experience. Please plan to join the tour and experience an education in the woods! Call Julie Woodward at OFRI, (503) 807-1614.

TimberWest July/August 2014 www.forestnet.com

Feed and Continuous Production

EXTERNALLY ADJUSTABLE

BREAKAWAY TORQUE LIMITER

We’ve designed the Morbark® 3800XL Wood Hog to be the best horizontal grinder on the market. It will dramatically increase your production capacity and operating efficiency, so you can fill your pockets as fast as it fills your trucks. • More Productive – A larger, more aggressive hammermill and independent drive motors on the feed-wheel and belt-chain result in a continuous feed with higher production, greater fuel efficiency, and a more consistent end product. • More Convenient – The Morbark Integrated Control System allows you to maximize production and keep the belt full with just an occasional tweak of your thumb. And you can conveniently service the grates and hammers while standing up, with plenty of headroom and space to work. • More Reliable – The 3800XL is protected from foreign objects by the best solution available: an externally adjustable breakaway torque limiter that releases instantly when overloaded without stalling the engine; this significantly reduces potential damage and decreases downtime. The Morbark® 3800XL Wood Hog is part of a full line of heavy-duty industrial grinders from the leader in the industry. Learn more about our machines and our extensive product support network at www.morbark.com.

SEE THE FULL LINE AT WWW.MORBARK.COM

AVAILABLE 7 MODELS

BUILDING EQUIPMENT THAT CREATES OPPORTUNITIES

Circle Reader Service Card 113

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Port Blakely Celebrates 150th Anniversary

his is a big year for Port Blakely.

It’s the company’s 150th anniversary. The company got its start in 1864, the same year Abraham Lincoln was re-elected President. That year Captain William Renton purchased land on Bainbridge Island, Wash., and founded the Port Blakely Mill Company. Over the next several decades the company experienced both booms and busts. Captain Renton took on new partners,

upgraded the mill and added a railroad to haul the huge logs from Mason County. The early years were not without a fair number of setbacks, too. The mill was burned and rebuilt several times and the company weathered sharp downturns in the economy. However, with perseverance, an entrepreneurial spirit, and a bit of luck, the company adapted and survived. In 1903, Port Blakely was purchased by two partners, Ned Skinner and John W. Eddy. Skinner and Eddy saw the need for ships during WWI and expanded the company into manufacturing steel-hulled ships. Eventually, the partnership dissolved with Skinner taking over the ship building business and Eddy, along with his brothers,

James G. and Robert B. Eddy taking over the timber business. Today Port Blakely Companies is a family-owned, diversified forest products company. While the company is no longer in the mill business, the fourth-generation of Eddys are committed to exceptional stewardship of their forestlands and businesses: Port Blakely Tree Farms, Pacific Lumber & Shipping and Blakely Pacific Limited. Congratulations, Port Blakely Companies, on achieving this milestone!

November 8-11, 2015

PLC in Hawaii

t’s time to start thinking about PLC 2015. The convention will be held on the Big Island of Hawaii at the Hilton Waikoloa Village Resort. Save the dates November 8–11, 2015, and mark your calendar. The theme of the 2015 event will be “The Future Is Here - Catch the Wave” and it will be led by 2015 president Todd Gordon, Caterpillar Forest Products. For more information on the upcoming event, you can log on to www.pacificloggingcongress.org, call (425) 413-2808, or visit PLC’s booth in the Main Tent display area at the In the Woods Show.

Circle Reader Service Card 114

TimberWest July/August 2014 www.forestnet.com

Circle Reader Service Card 115

Circle Reader Service Card 116

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Exhibitor Listings Advanced Drainage Systems 18812 NE 403rd St Amboy, Washington 98601 360-247-7434 www.ads-pipe.com Sponsors: Bronze Static Site: Friday Seminar

ADS is the largest, most experienced manufacturer of corrugated polyethylene pipe products in the world. Today, the engineered plastic system is a reality, providing better hydraulic performance, extended service life, and reductions in installation as well as maintenance costs.

Associated Oregon Loggers Inc. PO Box 12339, Salem, Oregon 97309 800-452-6023 • Fax: 503-364-0836 Sponsors: Silver Tent Booth: 5 Bandit Chippers 6750 Millbrook Rd Remus, Michigan 49340 989-561-2270 • Fax: 989-561-2273 www.banditindustries.com Active Site: Grinding

Bandit Industries, Inc. is the leading manufacturer of equipment for the wood waste recycling, tree care and biomass/biofuel production industries. Their line of whole tree chippers and horizontal grinders quickly and efficiently reduce the toughest wood waste into high-value end products.

Bearhaven Consulting 20816 SE 222nd St. Maple Valley, Washington 98038 425-413-1250 • Fax: 425-413-1359 Sponsors: Gold Brake Systems Inc 2221 NE Hoyt St Portland, Oregon 97232 503-236-2116 • Fax: 503-239-5005 www.brakesystemsinc.com Tent Booth: 4

Brake Systems Inc. “BSI” has been a manufacturer, remanufacturer and warehouse distributor of pneumatic, electronic and hydraulic brake products for the trucking and logging industry in Oregon for over 35 years. They will display a wide range of products, including a working model of its Blue Ox exhaust brake.

TimberWest July/August 2014 www.forestnet.com

Carco Industries Inc. 20803 SW 105th Av Tualatin, Oregon 97062 503-612-6557 • Fax: 503-612-6527 www.carcoindustries.com Static Site

Truck bodies, trailers and skids. Carco manufactures a wide range of fuel/lube bodies, mechanic crane and service vehicle bodies as well as crew carrier bodies.

Cascade Trader Inc 1380 NW State Ave Chehalis, Washington 98531 360-748-1182 • Fax: 360-748-1198 www.cascadetrader.net Sponsors: Gold Static Site

Cascade Trader, Inc. offers parts, sales and service for the complete line of Doosan Construction and Forestry equipment, including wheel loaders, excavators, “purpose built” log loaders, including models DX225LL and the DX300LL.

Caterpillar Forest Products 100 SL White Blvd LaGrange, Georgia 30241 309-675-1487 • Fax: 309-494-1765 www.caterpillar.com Active Site: Full Tree Sponsors: Platinum

Watch a whole tree harvesting demo of the Cat 568 FM shovel logger, Cat 522B Track Feller Buncher and Cat 324D FM equipped with a SATCO 323T processor head. See the Cat 525D, the new wheel skidder that out pulls the others. Visit Caterpillar’s tent and try your hand at the Cat track feller buncher simulator and talk about the advantages of genuine Cat undercarriage. Peterson Cat representatives will be available to talk to you about financing, services and all the machines, attachments and parts you need for road construction, logging, millyard and forest management. Total support from one source.

CMX Industries 13183 S. Hwy 211, Molalla, Oregon 97038 503-475-4116 www.cmxind.com Active Site: Grinding Sponsors: Gold

Construction and forestry equipment sales, service and support

Coast Truck Centers 955 NW Frontage Rd Troutdale, Oregon 97060 503-737-0110 • Fax: 503-737-0795 www.coasttr.com Static Site Western Star Class 8 trucks

Doosan Infracore Construction Eq. 2905 Shawnee Industrial Way Suwanee, Georgia 30024 281-351-5594 • Fax: 281-351-5695 www.doosan.com Active Site: Full Tree

Doosan Infracore’s Construction Equipment Division is undeniably a renowned global construction equipment supplier that boasts a broad lineup ranging from mid-large excavators to refractive dump trucks and small machinery, and an extensive global manufacturing, distribution and sales network.

DSU Peterbilt 4810 N Basin Portland, Oregon 97417 503-285-7771 www.dsutrucks.com Static Site Class 8 trucks

Dunlap Enterprises Box 221 Soulsbyville, California 93372 209-532-4974 dyna-products.com Static Site

Hydraulic firewood processors by Dyna Products

Feenaughty Mach Co Box 13279 Portland, Oregon 97218 (503) 282-2566 • Fax: (503) 282-1755 www.feenaughty.com Active Site: Full Tree

Feenaughty has always been a family owned business that believes in hard work and loyalty to our customers as well as employees. We maintain a dedication to supporting our customers’ needs with honesty and integrity. Going forward we will continue to support our customers with the equipment and service they have come to expect since 1901.

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

GB Australia 142 Chdu Passage Trois Riviers, Quebec G8T 2M3 CAN www.gbbar.com.au Tent Booth: 6

.404 and ¾ pitch harvester bars, drive sprockets, sprocket nose kits and special bars made to order.

HM INC PO BOX 1050, Eagle Point, Oregon 97524 541-826-2596 Sponsors: Silver Interfor 15555 S. Hwy. 211, Molalla, OR 97038 Tel: (503) 829-9131 • Fax: (503) 829-5481 Sponsors: Bronze Jewell Attachments LLC 18135 SW Boones Ferry Rd Portland, Oregon 97224 503-352-8200 • Fax: 503-352-8201 www.jewellattachments.com Static Site

Forestry excavator conversion packages, guarding, custom forestry booms, sticks and

cabs, tong throwers, forestry rakes and grapples, winch installations, shovel logger extreme conversions and Timber Mast’r dual winch yarders.

Joel Olson Trucking Inc. P O Box 69540 Vancouver, Washington 98665 360-694-8610 • Fax: 360-694-8579 www.joelolsontrucking.net Sponsors: Gold

Our off road equipment consists of wellmaintained Kenworth and Peterbilt tractors. We run chip vans, end dumps, box trucks, log trucks, short loggers, hay racks and lowboys. Our heavy equipment includes log loaders, excavators and bulldozers.

John Deere 1515 - 5th Ave., Moline, Ilinois 61265 563-340-2471 www.johndeereforestry.com Active Site: Full Tree

John Deere, a world leader in forestry equipment manufacturing, knows the rugged conditions where loggers work. John Deere manufactures equipment to handle the toughest challenges. Deere will feature a 2954D processor,

2454D, and a 959K leveling feller buncher at the active ground logging site, and a 160GLC at the Wood Grinding site.

Keep Oregon Green P.O. Box 12365, Salem, Oregon 97309 503-949-8166 • Fax: 503-945-7319 www.keeporegongreen.org Static Site Koller North America 33969 Highway 99 East Tangent, OR 97389 541-740-8669 www.kollerna.com Active Site: Cable Logging

Koller North America’s productive K602 yarder will be in action at the PLC. Koller makes 6 yarder models. Sales, service and support for Koller North America is through Timber Mechanized Solutions, Inc., or T-Mech.

Les Schwab Tire Center Box 5350, Bend, Oregon 97708 541-416-7815 www.lesschwab.com Static Site

Circle Reader Service Card 117

www.forestnet.com July/August 2014 TimberWest

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Linn Benton Tractor 33597 Hwy 99E, Tangent, OR 97309 541-926-1811 • Fax: 541-926-4306 www.linnbentontractor.com Static Site

Kubota Tractor dealer. Sales, service and parts

Logging & Sawmilling Journal Box 86670 North Vancouver, BC V7L 4L2 604-990-9970 www.forestnet.com Static Site

Logging & Sawmilling Journal is a national forest industry trade publication serving the information needs of harvesting and milling personnel across Canada. With the highest circulation and largest number of editorial and advertising pages in the industry, LSJ is the industry leader north of the border. Please visit us on line at www.forestnet.com.

McCoy Western Star 9622 NE Vancouver Way Portland, Oregon 97211 503-283-0345 • Fax: 503-283-2011 www.mccoyftl.com Static Site

TimberWest July/August 2014 www.forestnet.com

McCoy Western Star is a full service Western Star, Freightliner, and Sprinter Van Dealership with 3 locations in the Pacific Northwest. We offer a large selection of new and used trucks, full parts warehouse, service, and body shop. At McCoy Western Star we know logging, and make the process of building your log truck effortless. Western Star trucks are handmade and will perform in any terrain, climate, or application you require. Here at McCoy Western Star we put you and your truck first!

Meng Logging Box 13, Molalla, Oregon 97038 Sponsors: Gold Millner Haufen Tool Co. Box 121085 Nashville, Tennessee 37212 888-365-3301 www.millnertools.com Tent Booth: 1 Molalla Fire Department Main St, Molalla, Oregon www.molallafire.org Sponsors: Bronze Tent Booth: First Aid

Circle Reader Service Card 118

Morbark Sales Corp. P.O. Box 1000, Winn, Michigan 48896 800-831-0042 • Fax: 989-866-2881 www.morbark.com Active Site: Grinding

Morbark, a leader in the biomass industry, builds a full line of drum chippers, flail chippers, horizontal grinders and contaminated wood waste reduction equipment. At the PLC grinding site, Morbark will be demoing the 3800XL Wood Hog horizontal grinder. The 3800XL incorporates a proven driveline protection system designed to protect against catastrophic damage from contaminants. Standard features include the Morbark Integrated Control System which allows the operator to adjust feed systems for increased output while maximizing fuel efficiency.

Nelson Paint One Nelson Drive Kingsford, Michigan 49802 906-774-5566 • Fax: 906-774-4264 www.nelsonpaint.com Static Site

Nelson Paint’s paint and equipment for the Forest Industry is manufactured to provide the highest quality and best value for our customers.

(continued on page 30)

Circle Reader Service Card 119

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

BACK

IN THE

(continued from page 28)

MOUS THE WORLD FA

AUSSIE ORANG

E BAR IS BACK!

ODOT - MCTD Motor Carrier Ent. Box 245, Woodburn, Oregon 97071 503-982-0804 • Fax: 503-982-7201 Sponsors: Bronze

OREGON® | Blount International 4909 SE International Way Portland, Oregon 97222 503-653-4692 • Fax: 503-353-3214 www.oregonchain.com

BACK

IN THE

MOUS THE WORLD FA

AUSSIE ORANG

M SPEND $200 OR ORDER. OFF YOUR FIRST 00 AND SAVE $50. BOOTH ) INFO SHEET AT GB ( PICK UP YOUR

Today, Oregon/Blount Inc. is the world’s leading manufacturer and marketer of cutting chain, guide bars, and chain drive sprockets for chain saws, and a leading manufacturer and supplier of outdoor equipment parts. The OREGON® brand continues to be the choice of the trade in more than 100 countries around the world. Known for its innovative spirit, the company focuses on manufacturing products that offer a superior competitive advantage and hold leading market share positions.

Oregon Dept of Forestry 14995 S Hwy 211, Molalla, Oregon 97038 www.oregon.gov/ODF Sponsors: Bronze Static Site: Friday Seminar

E BAR IS BACK!

SPECIAL... PRODUCTS HUGE SHOW ESTER ORE ON GB HARV

Static Site

*FILL SHEET IN

Oregon Forest Resources Institute 317 SW Sixth Ave #400 Portland, Oregon 97204 971-673-2951 • Fax: 971-673-2946 www.oregonforests.org Sponsors: Platinum Tent Booth: 10

TO APPLY

$50 OFF. conditions apply

OR-OSHA will have a booth at the show to help make those attending aware of the free, norisk services offered by OR-OSHA. They will also provide site safety advice as requested.

SEE YOU AT THE GB BOOTH

Oregon OSHA 3350 Winter St. NE Salem, Oregon 97301 503-947-7425 • Fax: 503-947-7462 www.orosha.org Sponsors: Silver Tent Booth: 9 Pacific Forest Foundation PO Box 1281 Maple Valley, Washington 98038 www.pacificforestfoundaton.org Sponsors: Platinum Tent Booth: 3 Pacific Logging Congress P.O. Box 1281 Maple Valley, Washington 98038 425-413-2808 • Fax: 425-413-1359 www.pacificloggingcongress.com Sponsors: Platinum Tent Booth: 3 PITCH

ENT EXPO SEE YOU AT... & HEAVY EQUIPM G IN GG LO S KE OODS SHOW 2014 GREAT LA SS 7TH IN THE W RE NG CO G IN GG 2014 PACIFIC LO BIG SAVINGS ON...

PITCH

PIT CH

PITCH

PITCH PITCH

7/08/2014 2:52:54 PM

PITCH

At Papé Kenworth, we know Kenworth inside and out. We know what makes them tick and we know how to keep them rolling. PITCH PITCH

3/4

Pape’ Kenworth 550 NE Columbia Blvd Portland, Oregon 97211 www.papekenworth.com Sponsors: Bronze Static Site PITCH

.404

PITCH

30 TimberWest July/August 2014 www.forestnet.com timber_west_advert_3.indd 1

.404

PITCH

Circle Reader Service Card 120 PITCH

FREE CALL in USA 1-844-909-6164

thomas.beerens@gbbar.com.cn urban.fredriksson@gbbar.com.cn

PITCH

www.gbbar.com.au

GB Australian LLC

PITCH

HARVESTER

PITCH

• Replacement Nose Bars • Solid Sprocket Nose Bars • Extra Long Bars • Stump Treatment Bars • Double Ender Bars • Drive Sprockets • Sprocket Nose Kits • Special Bars Made to Order

The Pacific Logging Congress is the unified voice of the western forest industry. Founded in 1909, the PLC has sought to educate politicians, educators, their students as well as the general public about the need for sound responsible forestry.

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Pape’ Machinery, Inc 355 Good Pasture Island Rd Eugene, Oregon 97402 541-543-7426 www.papemachinery.com Active Site: Full Tree

Papé is your John Deere, Hitachi and Morbark dealer for Wash., Ore., Western Nevada and Northern Calif. Its exhibit in the full tree active area will feature Deere’s 2954D processor, 2454D, and a 959K leveling feller buncher at the active ground logging site, and a Deere 160GLC excavator and a 3800XL Wood Hog horizontal grinder on the wood grinder site. Personnel will provide expertise and answers.

715-369-4833 • Fax: 715-369-4838 www.ponsse.com Active Site: Cut to Length

Ponsse provides loggers with the best tools for all tree species and harvesting environments.

Port Blakely Tree Farms 8133 River Dr SE Tumwater, Washington 98501 www.portblakely.com Sponsors: Platinum Tent Booth: 7 & 8

Peterson Cat 4421 NE Columbia Blvd. Portland, Oregon 97218 503-280-1540 Fax: 503-280-1580 www.petersoncat.com Active Site: Full Tree Sponsors: Platinum

Peterson Cat is Northern California, Oregon, and southwest Washington’s authorized Caterpillar dealer. We’re your source for Caterpillar machinery, portable and stationary diesel-powered generators, natural gas turbines, agricultural equipment from AGCO and Claas, and equipment guidance systems from Trimble. Visit us online at petersoncat.com!

PetersoN Box 40490 Eugene, Oregon 97404 541-607-7911 www.petersoncorp.com Active Site: Grinding Sponsors: Gold

The Peterson 2710C provides plenty of power in a compact grinder with a 765 hp engine. At 59,000 pounds the 2710C was designed for operations requiring high production and frequent moves between jobs. With a feed opening of 60¾ x 32 inches combined with Peterson’s high lift feed roll for an optional opening of up to 44 inches high, the 2710C can readily reduce a wide range of material.

Pierce Pacific Mfg PO Box 30509 Portland, Oregon 97294 800-760-3270 Fax: 503-808-9111 www.piercepacific.com Active Site: Full Tree

Since 1931, Pierce Pacific Manufacturing, Inc. has been designing, engineering, manufacturing, delivering, and supporting customized products that meet the demands of heavy industry, and the needs of our customers. With expertise in scrap, refuse, and bulk material handling, as well as demolition, specialty excavation, forestry, and heavy-duty crane applications, our product knowledge is vast, comprehensive—and always growing.

Ponsse North America Inc. 4400 International Lane Rhinelander, Wisconsin 54501

Circle Reader Service Card 121

www.forestnet.com July/August 2014 TimberWest

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Prinoth Corp. 1001 J.-A.-Bombardier St Granby, Quebec J2J1E9 CAN 801-391-9197 www.prinoth.com Active Site: Grinding

Vegetation management equipment including forestry mulchers, biomass harvesting equipment, stump griders and excavator mulching attachments

Quadco USA 169 Industrial Dr Lexington, South Carolina 29072 803-951-1951 www.quadco.com Static Site

As a true visionary and pioneer in the forestry industry. Quadco embraces quality craftsmanship, business relationships plus loggers needs. We are recognized worldwide for revolutionizing the forestry industry through development of the Quad Tooth® System as well as other valuable products used by loggers every day. Our line – up includes forestry cutting tools, saw discs, and attachments.

TimberWest July/August 2014 www.forestnet.com

Rapid Span Structures Ltd. 1145 Industrial Drive Armstrong, British Columbia V0E 1B6 CAN 250-546-9676 • Fax: 250-546-9066 www.rapidspan.com Static Site

Rapid-Span is a leading manufacturer of permanent and portable bridge systems tailored for the forest industry. We offer custom engineered structures that install quickly and easily with standard logging or road building equipment. Fast delivery anywhere in North America.

Ritchie Bros. Auctioneers 3006 Aspinwall Rd NW Olympia, Washington 98512 800-663-8457 • Fax: 360-956-1508 www.ritchiebrosauctioneers.com Sponsors: Gold

For over 50 years we’ve been helping people buy and sell used heavy equipment. We provide services that make it easy – and the information you need to buy and sell heavy equipment with confidence.

Circle Reader Service Card 122

SATCO 100 SL White Blvd. LaGrange, Georgia 30241 309-636-1486 Static Site

Exclusively distributed through Caterpillar in North America, SATCO offers a line of 7 processing heads and 2 directional fellers. The processing heads range from a weight of 2,618 lb. with a maximum cutting diameter of 25 in. to 8,500 lb. with a cutting diameter of 32 in.

Southstar Equipment 728 Tagish St Kamloops, British Columbia V2H1B7 CAN 250-558-8674 • Fax: 250-828-7825 www.southstarequipment.com Static Site

Three sizes of high production processing heads. Southstar’s 4 roller head design allows operators to multi-stem small diameter stems or process larger trees up to 40” in diameter.

TimberWest Magazine Box 610, Edmonds, Washington 98020 425-778-3388 • Fax: 425-771-3623 www.forestnet.com Sponsors: Gold Static Site

2014 PACIFIC LOGGING CONGRESS • IN-THE-WOODS EQUIPMENT SHOW

Since 1975, each issue of TimberWest has been packed with valuable job stories about successful mechanized harvesting, wood processing techniques and equipment. Also inside you’ll find timely information on legislation, industry news, annual events, people profiles and products reviews.

Young Corporation Box 3522, Seattle, Washington 98134 PH: 800-321-9090 www.youngcorp.com Tent Booth: 12

Young Corporation will introduce their new D Series lYoung Corporation will introduce the

new “D” Series log grapple at the PLC. Young Corp manufactures a wide range of forestry and material handling equipment including swing boom grapples, log forks, blocks & rigging, scrap grapples, clam shell buckets long fronts and material handling machines.

T-Mech 33969 Hwy 99 E Tangent, Oregon 97389 541-248-3537 Active Site: Cable Logging Troy’s Diesel & Truck Repair 555 Shaver Ave, Molalla, OR 97038 (503) 829-9314 Sponsors: Bronze U.S. Pride Products 1516 110th Av Hammond, Wisconsin 54015 715-246-9237 Walsh Trucking Central Division Terminal 1650 NW Sundial Rd. Troutdale OR 97060 (503) 667-1912 Active Site: Grinding

Family owned and operated for over 50 years, Walsh Trucking is the wood residue transportation leader in the Pacific Northwest. Our specialized fleet provides high quality service to the wood residue and solid waste industries

Waratah Forestry Attachments 2401 Talley Way Kelso, Washington 98626 360-636-2950 • Fax: 360-636-2980 www.waratah.net Static Site

Waratah is the harvester processor head leader. Best known for the full line of HTH 600 Series heads ranging from 12” to 34” tree size, Waratah also manufactures biomass harvesting heads, directional fellers and measuring/ control systems.

Western Forest Products Inc 118 - 1334 Island Hwy Campbell River, British Columbia V9W 8C9 250-286-4134 • Fax: 250-286-3375 www.westernforest.com Sponsors: Silver Weyerhaeuser Co - Western 16821 SE McGillivray Blvd ste 210 Vancouver, Washington 98683 360-891-3385 • Fax: 360-891-3388 www.weyerhaeuser.com Sponsors: Platinum

Weyerhaeuser is inspired by trees. Their strength, vitality and unlimited potential to be transformed into useful products have guided its approach to business for more than a century. Trees and human ingenuity are equally precious, sustainable resources, and Weyerhaeuser is committed to growing both.

Circle Reader Service Card 123

www.forestnet.com July/August 2014 TimberWest

TimberWest July/August 2014 www.forestnet.com

ContractorProfile

Turning Challenge

into Opportunity

TimberLine Logging Inc.

Lindsay R. Mohlere

ot one to shy away from a challenge, Ted Hufford, owner of Timberline Logging Inc. of Sweet Home, Ore., always knew going in it wasn’t going to be easy.

The First Truck

“I started logging with my dad right out of high school, but didn’t stay in it,” Hufford says. “I drove log truck for a small operation and then I got hired on by a big fleet but they didn’t have a truck for me. They said the new rig wasn’t going to be in for two or three months.” Undeterred by the strange twist in circumstance, Hufford took a bold step toward the future. He bought his own truck. “I had to do something, so I created my own job,” he says. A few years later, Hufford bought another rig to keep up with increased production. “I 36

TimberWest July/August 2014 www.forestnet.com

even put my dad to work driving that truck. He worked for us until he was two weeks shy of his 88th birthday,” Hufford adds with a chuckle.

The Move to Logging

Hufford kept on trucking until he partnered with Butch Watkins to form Ridgetree Logging in 1988. “We used to meet at our son’s basketball games. He was logging; I was trucking. We decided to go together and buy a yarder. We ran a skid side and a tower side.” The partnership ended in 1995 and Hufford kept the tower side and founded TimberLine Logging Inc. Since then he’s bobbed, weaved and ducked nearly all the wild haymakers an entrepreneur and small businessman has to endure to survive in a rapidly changing economic environment.

Gearing Up for the Long Haul

Staying a contender in the rollercoaster timber industry means keeping equipment

in top form and on the job. It also means being adaptable to the work at hand. The company has invested in machinery to work skid sides as well as tower sides. “We do combination units where we run two sides but we’re beginning to run out of flat ground for our ground skid operations. I expect we’ll be tower logging from here on,” Hufford says. TimberLine runs two log loaders, an older Kobelco 290 and a 2013 Kobelco 350. A 2006 Pierce stroker on a 2006 Kobelco SK250 shares processing duties with a 2011 Log Max 12000 dangle head paired with a 2007 Kobelco 350. The workhorse of the crew is the 172 Madill yarder brought on board in 2007. Hufford said he opted for the 72-foot Madill tower because he needed something bigger and a little stronger to handle his production. A D7 CAT and three late model Kenworth 900L Long Hood log trucks fill out TimberLine’s iron roster. “When I started out, I had older machines. As we went along we got newer iron so they weren’t in repair all the time,” Hufford says. Then the recession hit. “Never kept a

ContractorProfile Left: Lucas and Ted Hufford of TimberLine Logging. Below: TimberLine runs two log loaders, an older Kobelco 290 and a 2013 Kobelco 350.

machine longer than 7000 hours. When the bottom dropped out I had to keep stuff around 10,000 to 12,000 hours. In 25 years I’d never kept equipment that long. We needed to hang on to it longer to bring the debt load down and survive. I always felt like you could pay for anything as long as you were working.

When you’re not working, all those payments and fixed expenses don’t go away.” At present, TimberLine Logging contracts out for cutting, however that may change in the coming future. “My contract cutter is 67 years old and when he decides to retire I told him I’d probably take over the

Circle Reader Service Card 124

cutting myself. This whole recession thing hit him pretty hard too, it was costing him money to keep his crew.”

Employees Keep It Rolling

Finding and keeping experienced employees on the job and recruiting new people

www.forestnet.com July/August 2014 TimberWest

ContractorProfile

When Hufford started out he had a number of older machines. “As we went along we got newer iron so they weren’t in repair all the time.” into the business is another challenge that must be met and overcome for success. “Good, experienced employees are rare,” Hufford says. “Not many younger people are coming into the business either. It’s tough to find qualified people.” Hufford fields a crew of ten, including truck drivers. They are considered TimberLine Logging’s most valuable asset. He also believes crew experience and adaptability are just as important as machine versatility. To make sure the operation keeps rolling, most of the crew has been crosstrained to operate different machines. “The shovel operator can run the Log Max or operate the stroker,” Hufford explains. Most of the crew has worked for the company over ten years or more. Benefits include health insurance and a 401K program.

It’s All About the Work

“The biggest hurdles we face are market variables that will keep us from being able to continue working,” Hufford says. When the housing bubble blew up in 2008/09, Hufford was affected like every other logging operation across the country. “When the crash hit and the housing market tanked we were told the market wasn’t strong enough. We ended up working about six months a year. It’s different now.” In 2013, Hufford logged over 9 million board feet and hopes to boost production to over 11 million this year. Whether that goal can or can’t be met depends on several outside factors. “We work on a sustained yield. If we get close to our quota we might have to back off and slow down,” Hufford says.

He’s relieved the recession is over, but he still sees market conditions as one of the biggest challenges his company will have to face, now and in the future. Last year was a good year for TimberLine and this year there’s a lot more work waiting out in front. Economic indicators point to a strong recovery of the U.S. timber market thanks to the increased construction and remodeling of single-family housing. Mills have reopened and are investing to improve efficiency to boost production to meet domestic demands as well as blossoming export orders. Industry confidence is gathering strength. Still, Hufford remains cautiously optimistic. “Business looks good down the road, but I don’t think we’re out of the woods yet,” he says. TW

Adding Family to the Crew

To ensure the company’s management keeps a keen edge and continues to push forward, Hufford brought in his son Lucas to help manage the business, with an eye on eventually taking over. Right after he’d graduated from high school, Lucas told his dad he wanted to come logging fulltime. “ I said that would be okay” Hufford says, “but he had to go to go to college first. At least a couple of years.” Lucas took a couple years off to go to college at Linn Benton C.C. while working part time for TimberLine. He came back to the business full time in 2001 and became a partner in 2012. Both men are on the job on a daily basis, with Ted operating one of the log loaders and Lucas multi-tasking where needed. “Lucas is our number one hook tender, but when I have to be gone, he does double duty. He can run dangle head, operate the stroker or run the yarder. He’s pretty much an all-around good hand. I call him my Vice President of Operations,” Hufford says with a slight smile. “He can pretty much do it all.” 38

TimberWest July/August 2014 www.forestnet.com

Hufford has a crew of 10, including truck drivers. Like almost all operations, Hufford says the crew is the company’s most valuable asset.

Circle Reader Service Card 125

ContractorProfile

Keep it Simple Barnes and Sons Logging has that “Go for It” spirit By Clayton Petree

or well over 150 years, the West

Coast forest industry has been, in good times and bad, an attraction to free enterprise entrepreneurs seeking opportunity. Even in times of economic stress,

like those faced in recent years, there are those willing to take a risk and approach a challenge in a new way. They “go for it” — establishing the new businesses needed to preserve the future of the industry. An example of optimism and entrepreneurial spirit in 2014 is Lewis County’s

Above: (LtoR) Mike and Don Barnes taking a quick lunch break. Below: At the landing Don operates the Doosan 225LL log loader with Mike bucking and prepping logs for the mill.

TimberWest July/August 2014 www.forestnet.com

Barnes and Sons Logging LLC, a newly formed company that logs tracts defined by the Forest Service as being at the urban public forest lands interface or “Forests at the Edge.”

Two-Man Team

Barnes and Sons Logging is a father and son team. Don Barnes, Mike says of his dad, logged from about the mid-1980s through the mid-90’s and enjoyed the experience. “I have always wanted to log. I have a small construction side, Barnes Trucking, and I thought the more diversified we could be, the better off we would be. My dad and I thought that if we could get into logging it would help fill the voids when construction gets slow.” According to Don, Mother Nature also played a hand in the decision to start a new business. Don and Mike co-own 25 acres of timber near Centralia; acres that had been hit by an ice storm a few years ago. “If you look around, you’ll see a lot of trees with the tops busted out of them, so we thought it would make sense to log the stand before the bugs and rot got to it,” Don says.

ContractorProfile Staying Small

The Barnes’ approach to harvest is the opposite of the “Go big or go home” philosophy often prevalent in the latter years of the last century. “Our long-term plans are to keep it small; maybe eventually get a little bigger with a couple more guys but for now, the way we are doing it is working good,” Mike comments. “We do all the work ourselves but we will have subs come in if we need the help.” A second approach to keeping it simple is explained by Don. “Modern equipment is tremendously expensive. If you buy something like a feller buncher, you are looking at hundreds of thousands of dollars of investment, and that means you have to keep the machinery running all the time.” Pointing to a Komatsu XT445 L feller buncher equipped with a Quadco 22” hot saw that is owned by Don Fudge Contract Cutting, Don continues, “An experienced contract cutter can come in and get the job done quickly and well, and then they’re gone. Once we’ve paid them for the job, we’re done. No machine payments and no need to go out and make sure the machine is kept busy. They move on to the next job, and we get on with our job.” Mike adds, “It was really nice to have the

feller buncher on this job., He stacked all the butts so they’re pointing the right way; the smaller trees like what were on that job are easier for a buncher to control rather than having them hand felled.” Once trees are on the ground, the stems are shovel logged to landings and prepared for hauling. A Danzco pull-through delimber is used in tandem with a Doosan 225LL log loader to prep stems and load them onto trucks. “The trucking so far has been pretty easy to arrange,” Mike says. “Between the two of us we know of quite a few trucks around so finding trucks has not been an issue.”

Flexibility

The interaction between Mike’s construction company and the logging effort provides for a considerable amount of flexibility in prepping and accomplishing a harvest. A Caterpillar D5 dozer, a Kenworth T800 dump truck, and a Link-Belt 160 excavator are used for road building and other tasks. Even when Barnes and Sons has equipment available, Don and Mike stay open to opportunity. While harvesting their own 25-acre parcel, for example, the fir market began to soften so Horsley Timber and Construction was called in to process some

PREMIUM

The value of ‘tried and true’, is what you get with our strong range of professional sawbars. The competitive edge for the harvester operator, isn’t just our 30 years of design, manufacturing and global distribution, it’s the strength of Swedish steel and your know-how.

Unbeatable

Holes instead of slots for firm fastening without play, increasing the lifespan of the sawbar Special alloy in R-Series for exceptional strength Unique heat treatment makes sawbar extremely rigid and durable Nose sprocket has 12 teeth reducing its R.P.M. for less friction and wear Hardened shims guide and protect nose sprocket bearings

Get The Competitive EDGE with IGGESUND Sawbars – Contact:

Olofsfors Inc. Tel: (519) 754-2190 Fax: (519) 757-1100 Email: info@olofsfors.com Circle Reader Service Card 126

www.olofsfors.com |

www.forestnet.com July/August 2014 TimberWest

ContractorProfile

For felling, Barnes and Sons uses Don Fudge Contract Cutting Inc. seen here with a Komatsu XT445L equipped with a Quadco 22” felling head. Trees are positioned for easy skidding.

Circle Reader Service Card 127 42

TimberWest July/August 2014 www.forestnet.com

of the timber with a dangle head delimber owned by that company. “That was an advantage for us because we were able to process and ship the logs faster than we could on our own,” says Mike. Past investments in land with timber have allowed Don and Mike to shape their business for success on their own terms rather than forcing them to go in directions they prefer not to go. For the future, Mike says, “We plan on doing a lot of our own timber but will look at jobs that come our way. For now we just keep our heads down and keep moving forward. We are learning new things all of the time.” Mark Twain once responded to newspaper reports pertaining to his death claiming that, “The report of my death was an exaggeration.” In 2014 the forest products industry can say the same to those who believed the industry would roll over and die in the face of the on-going recession. The key to the future, as Barnes and Sons Logging demonstrates, is maintaining a flexible operation capable of adjusting to take advantage of opportunities. TW

Circle Reader Service Card 128

Circle Reader Service Card 129

Bobcat Central and Tigercat take over Northern California

Tigercat is very pleased to announce that Bobcat Central has taken over Northern California as a full-line authorized Tigercat distributor. Located in Stockton, Calif., Bobcat Central is a well-established dealer and represents several quality product lines including Bobcat, Doosan, and Kubota. For 38 years, Bobcat Central has been a familyowned and operated business. Owner Don Franzia has been with the company from the very beginning, when it was founded in 1976. “We are very excited about this formalized partnership with Tigercat,” says Don. “We know we complement each other very well to give the support loggers expect. We will be able to continue to give the customers the service that they deserve.” www.tigercat.com

John V. Faraci, CEO of International Paper, named RISI North American CEO of the Year

Mr. John V. Faraci, CEO of International Paper, has been named the 2014 North American CEO of the Year by RISI, the leading information provider for the global

forest products industry. The award will be presented to Mr. Faraci at the 29th Annual RISI North American Forest Products Outlook Conference. Faraci was nominated by a group of investment analysts and portfolio managers covering the European and global pulp and paper industry. The criteria for nomination include leadership, vision, and strategic accomplishment. IP’s growth under Faraci’s leadership has seen the company become a world leader in containerboard production as well as a major player in market pulp and coated paperboard. Leadership is also about making tough decisions. Faced with declining demand in the graphic paper market, IP shut down the 950,000-ton/yr white paper mill in Courtland, Ala. Labor peace in the U.S. has also been secured with a six-year master agreement with the United Steel Workers, which was signed in 2014 and covers 18 mills and more than 6,000 workers.

Forest2Market Expands Sales Team

Forest2Market has expanded its executive sales team to deliver consistent messaging and account management as it responds to U.S. and international growth.

Circle Reader Service Card 130

TimberWest July/August 2014 www.forestnet.com

Gordon Culbertson, who has served Forest2Market’s customers since 2007 as Pacific Northwest Region Manager, has been appointed Director of International Business, where he will work to establish relationships and identify new business partners across the globe. Culbertson will continue to provide service to Forest2Market’s Pacific Northwest

Circle Reader Service Card 131

customers until the Region Manager position is filled. Peter Coutu, current sales manager of Forest2Market’s Midwest and Northeast regions, has been promoted to Sales Director – North America. In his new role, Coutu is responsible for customer account management and sales of all subscription services in the U.S. and Canada. Forest2Market’s regional sales staff will report to him.

Cathy Mann, Terex® Fuchs Southwestern Regional Sales Manager

Quebec-based COMACT Huron Capital and Bandit Industries Sign Letter of Intent

Huron Capital Partners and Bandit Industries entered into a letter of intent to recapitalize Bandit as a private company and provide resources and capital to reinforce Bandit’s continued record growth while accelerating the company’s global growth strategy. Jerry Morey will continue to run the business as president and CEO. Upon

closing, a CEO succession plan will be initiated to recruit and train a top caliber executive to lead the business into its next phase of growth. Mike Morey Sr. and Dianne Morey will remain with the company in consulting roles. Bandit will be co-owned by Jerry Morey, Mike Morey, Dianne Morey, and Huron Capital. The investment is expected to close in early fall 2014. TW

Cathy Mann has been appointed as the new Terex® Fuchs equipment Southwestern regional sales manager for Terex Construction Americas. In a territory that includes Colorado, New Mexico, Arizona, Utah, Nevada, California, and Hawaii,

Mann now has sales and distributor development responsibilities for the complete line of Terex Fuchs material handlers, purposebuilt for the lifting and reach needs of the scrap, recycling, logging, and port markets. Mann has 16 years of equipment manufacturing experience in the industry.

COMACT Expands to Pacific Coast

COMACT, a subsidiary of the BID Group of Companies, announced that it will be establishing a new “COMACT USA” spare parts and service center in Washington State. This strategic location places Comact in the four quarters of North America. Ultimately, the new location will drastically decrease time-to-market and related costs of products that would otherwise be shipped from one of BID/COMACT’s Canadian locations. The new branch will be located in Woodland, Wash., about 30 miles north of Portland, Ore. The offices and warehouse will accommodate a service team and inventory of critical spare parts for customers in the region. www.comact.com

Circle Reader Service Card 132

www.forestnet.com July/August 2014 TimberWest

The College Crowd Takes on Woody Biomass By Barbara Coyner

f you are flying out of a Pacific Northwest airport, chances are that you might soon be seated in a jet powered by woody biomass. In fact, it might already be happening. The sophisticated woody biomass jet fuels of today – and tomorrow – are the product of years of testing and many trial runs. After the woody biomass is transformed from its crude beginnings to a highly refined biofuel, it is run through engines, and the engines are deconstructed and studied for corrosion, as well as overall performance.

Northwest Advanced Renewable Alliance

Behind some of these intense studies is a group known as NARA, or Northwest Advanced Renewables Alliance, which is composed of university scholars and scientists. The Department of Agriculture provided seed money of $40 million to Washington State University and another $40 million to the University of Washington in 2011, making it one of the largest USDA grants ever handed out. The grants cover a five-year period. For the logging contractors working in the remote western woods, such well-funded

academic research is a million miles away. Yet in reading the NARA publications online, it is clear that the link between academics and producers is vital. Moreover, researchers are challenging high school students to delve into woody biomass power too. Students are sinking their teeth into theories and scientific experiments, giving presentations at regional gatherings, vying for who can come up with the best ideas. This is just one way that young people can be invited to learn about forestry cycles and the contributions of loggers in producing alternative and renewable energy sources. (Read more about NARA’s Imagine Tomorrow Competition at http://nararenewables.org/ feature/newsletter-17.)

Potential Sites

Map courtesy of N. Martinkus, W.P. Shi, N. Lovrich, J. Pierce, P. Smith, and M. Wolcott. 2014 - Integrating biogeophysical and social assets into biomass-tobiofuel supply chain siting decisions. 46

TimberWest July/August 2014 www.forestnet.com

Beyond the emerging educational opportunities, there is the woody biomass research itself. For example, the Western Montana Corridor study (http://nararenewables.org/feature/newsletter-17#story2) is an in-depth section on potential sites for the production and storage of woody biomass. As the study lays it out, biomass is brought to a conversion facility where residuals are converted into carbohydrates, which are then processed into isobutanol, or biojet fuel. The conversion process is similar to the long-practiced method of sulfite pulping, making an old pulp mill facility a perfect conversion site. So where are some good potential sites? Many might be right in your own backyard. In fact, a vacant millsite near my Princeton, Idaho, home turns out to be a feasible site, not because it’s a pulp mill, but rather because it has other attributes such as central location, railroad access, and several useable outbuildings. The study considers this site a

WoodyBiomassColumn possible feeder location that could serve a hub facility at the now defunct pulp mill in Frenchtown, Mont., 223 miles away.

Montana Corridor Study

The Montana Corridor study by NARA lists an industrial site at Libby as a potential conversion hub, with Idaho depot sites at Bonners Ferry, Priest River, and Athol, and Montana sites at Noxon, Fortine, and Thompson Falls. The study delves into the pros and cons of each site. For example, the Bonners Ferry site was previously a Louisiana Pacific mill site, with rail connections, sewer, water, outbuildings, and commercial zoning all working in its favor; not to mention abundant vacant land for biomass storage. Such a feeder system has to be part of the equation if costs are to be kept down, and Bonners Ferry fills the bill. By contrast, Noxon and Priest River are not conveniently located near rail lines, making the shipping of materials more costly. The old Smurfit-Stone pulp mill site at Frenchtown also comes under the microscope in the NARA Western Montana Corridor study. The mill closed in 2010, but the location remains prime, being at the junction of I-90 and highways 200 and 93. With 3,200 acres, wastewater ponds, and railroad spurs coming into the grounds, the site would make a feasible conversion hub. As for the feeder sites, the study lists the old Plum Creek sawmill grounds at Pablo, Mont., along with the Anaconda Smelter superfund site near Deer Lodge, the old mill grounds at Princeton, eight acres at Darby, Mont., spare land around a still-operating mill at Kamiah, Idaho, and the abandoned mill operation at Bonner, Mont. In each instance, researchers have evaluated these potential depot sites as possibly advantageous because of existing rail lines, good location, remaining outbuildings, or any number of other attributes. Such attributes have to be considered, given the low commercial value of woody biomass.

the research, there is likely a new awareness about woody biomass by a part of the public that might have had little knowledge of such wood products potential. A member of the NARA Outreach Team, Craig Rawlings of the Forest Business Network, sums up the in-depth studies this way: “Whether or not an ounce of jet fuel comes out of this project, this is very solid research that will benefit any industry that utilizes logging slash. No matter what you use this stuff for, the value is low, and the cost of collecting, processing, and transporting is

high. A major component of this project focuses on lowering these costs and improving efficiency.” As a postscript, an online report details the importance of biofuels to the military, as assessed by the Union of Concerned Scientists. Read more at http://biomassmagazine.com/articles/10634/new-videohighlights-the-importance-of-biofuels-to-themilitary. TW

Research Results

These are but some of the examples of research being churned out by NARA participants. No doubt pinpointing actual locations and the advantages of each processing site can help woody biomass processors get real about the end game. After all, biomass storage, convenience of location, connectivity to rail lines, and existing infrastructure are all vital components for turning wood waste into jet fuel. The steady stream of residuals has to be handled efficiently and economically in order to get investors and the public to buy into the plan. An added bonus is that with college students now doing some of

Circle Reader Service Card 133

www.forestnet.com July/August 2014 TimberWest

ContractorProfile

With the Right Equipment,

Any Job is Possible

Pulley Logging Corp., Sedro Woolley, Wash. By Andrea Watts

elicopter logging to thin-

ning in an ecological reserve—for Greg Pulley, owner and founder of Pulley Corp., the question isn’t what logging jobs has his company taken on, but rather, what jobs hasn’t he taken on. Pulley became a logger because, at 23, his father called him and said, “If you have a big tower, we have lots of old growth timber to log for Barbee Mill.” That decision more than 30 years ago created a company that has survived the timber industry’s booms and busts by adapting to changing silviculture prescription practices.

Busy Days

The day I tagged along with Pulley to visit his job sites, he had a full day planned after 48

TimberWest July/August 2014 www.forestnet.com

our 5:30 a.m. departure from Mountlake Terrace, a city 10 miles north of Seattle. First a visit to the city of Tacoma’s Green River Watershed where one crew was working on a Washington State Department of Natural Resources (DNR) thinning operation; over to Belfair to inspect another DNR thinning operation; and then to the coast to observe a tower logging clear-cut operation on the Quinault Indian Nation. For Pulley, this amount of traveling isn’t out of the ordinary; the previous day had him down in the Battle Ground area overseeing a helicopter logging operation. Running multiple jobs sites throughout western Washington is a business model that sets Pulley Corp. apart from other logging companies. Though potential jobs are a distance from the company’s base of operations in Sedro Woolley, if the calculations done by

ContractorProfile his timber manager, Don Anderson, demonstrate the jobs are profitable, Pulley won’t hesitate to bid. This means that his company has worked at sites that include Fort Lewis and the Cedar River Watershed but also over in Yakima (in eastern Washington) for an agricultural district’s thinning job, which Pulley described as being a blast.

A Forte for Thinning

Thinning operations are my company’s forte, and “the larger the project, the better it is for us,” he says. Sales can range up to eight million board feet. Pulley began thinning almost by accident. In the early 90s, when the spotted owl issue halted federal logging operations, Pulley was working at a site that was blocked during the controversy. He had to look elsewhere for work. “I kept seeing DNR putting up thinning sales, and they weren’t selling, so after acquiring a loan from Skagit Bank, I had the funds to bid on the jobs, and I have taken them on ever since. [These jobs are] a strong meal ticket for us to keep everyone employed.” Thinning operations can be challenging. They require good fallers (especially on tower sites) who can fall the trees in a way that not only minimizes damage to the surrounding trees but also makes it easier for crews to yard the trees. And while it is also challenging to work with the foresters assigned to oversee the operations, Pulley says, “At the end of the day, we’re here to make the prescription work.”

Flexibility

Pulley’s company purchases timber sales and contracts logs, and he says this flexibility works well for the crews. Purchasing the timber sales that can be logged over the course of several years allows him to schedule work to take advantage of the market when it is good, or in the case during the recession, keep his crews working. And his experience logging with various equipment setups, whether shovel, tower, or helicopter, means Pulley can adapt to any site condition. Helicopter logging came about on a job Pulley did with Brian Jorgenson’s Timberline Helicopter in Port Angeles in 2006. Due to the additional costs associated with using helicopters, Pulley only considers the jobs if there is a reasonable margin of profit. At the time of the article, he had a helicopter logging job down in Battle Ground and had recently done some work in the Gifford Pinchot National Forest near Yacolt.

Pictured is Pulley’s Cat 3200 and Doosan 225 at the Quinault reservation tower site. guy” with extensive timber knowledge and experience, to Duane Mefford, who is a “shovel logging machine.” Truman Santiago, a recent hire, has credentials that stretch back 30 years. Of Anderson, the company’s third timber manager and former faller, Pulley says, “I couldn’t function without him.” “My reason for treating my guys well is simple,” explains Pulley. “In this business, if you take the fun out of it, the guys will go away.” Pulley’s crew consists of 38 dependable employees, including Pulley’s wife Katie (the office accountant) and Melissa Anderson, who handles log and trucking accountability, L&I compliance, and assists Katie and Don

—the company couldn’t operate without her, according to Pulley. Pulley also relies on partnerships to complete jobs, and he enjoys this side of the business. “I meet the neatest people in this industry,” he says. His company doesn’t handle the hauling; instead that is contracted out to Bob Hillier, owner of Hire Trucking, whom Pulley has worked with for many years. Pulley Corp. runs 12-16 trucks on any given day throughout western Washington, and Pulley says Hillier always comes through. Terry Rabuzite, owner of Aloha Excavation and a long-time friend from Pulley’s school days, does road work as

Keeping It Fun

On the job sites, Pulley has praise for every crew member, from Aaron Parker, his woods supervisor who is said to be a “great

Circle Reader Service Card 134

www.forestnet.com July/August 2014 TimberWest

ContractorProfile needed, and Blair Stadin, owner of Precision Forestry, is someone Pulley has worked with and would like to continue working with in the future because their companies worked well together.

Keeping Up with Equipment

These much-needed partnerships are also found in the financing side of the business. “When we started the business, it was with a few old pieces of equipment, and we grew very slow, saving up a bit as we went along,” Katie says. Pulley Corp.’s first piece was a Skagit Tower, and the equipment portfolio has expanded substantially over the years. As my dad said, “‘If you have the gear, you have the job,’’ Pulley says. To pull him through the recession, Pulley relied on the 071 Madill Yarder, 830L Tigercat with a Waratah processing head, and a 320 CAT log loader and D5H grapple CAT with a swing boom. Pulley’s current equipment is primarily CAT because of a rent-to-purchase program offered through NC Machinery. He praises the branch manager for giving his company a “great [financing] tool” that allows him to invest in new, efficient equipment. He

TimberWest July/August 2014 www.forestnet.com

also credits Skagit Bank, especially Kirk Hereford, his banker, as “always be[ing] right beside me” when it comes to lines of credit. Out on the Green River Watershed job site we visited, Parker was running a CAT 320D, and Scott Radder was operating a Tigercat with the Waratah 622B head. In Belfair, Mefford was on a new 568 LL CAT while Sean operated a CAT 325D with a 623C Waratah head. The two tower

Circle Reader Service Card 135

logging sites had a 255 Thunderbird and a 071 Madill Tower, which were paired with a 225LL Doosan and CAT 320D.

Ever Evolving

Throughout his 30-year career, Pulley has witnessed many changes, including the end of logging operations in the city of Seattle’s Cedar River Watershed. Pulley worked there during his company’s first nine

ContractorProfile years, contributing to the 200 loads a day that came out of the watershed. But logging operations ceased after the public voted to place the entire area into a habitat conservation plan. Pulley remembers the watershed’s director vowing logging would never happen again. Twenty years later, logging did happen again, albeit as thinning operations, and Pulley found himself back working in the watershed. Because the Cedar River Municipal Watershed is considered an ecological reserve with the goal of creating an old growth forest, silviculturist Rolf Gersonde‘s prescription called for selective thinning. Pulley’s crew had to work slower and adapt their traditional yarding techniques to minimize the damage to the surrounding trees. As an example, instead of yarding trees uphill, they were yarded downhill. In reflecting on the job, Pulley said the relationship with Gersonde and his company worked really well, and he is proud of the work they accomplished. With the Cedar River Municipal Watershed also being FSC certified, Gersonde asked if Pulley would be interested in obtaining FSC certification

Circle Reader Service Card 136

to keep the chain of custody intact. Though earning FSC certification wasn’t a requirement of being awarded the job, Anderson said becoming certified made sense, and Pulley Corp. is the only logging company they know of that has this certification. He worked with Sustainable Northwest to earn the certification and described the process as pretty straight forward. “Although the certification doesn’t necessarily always yield a higher price at the mill, it just gives us an upper hand on certain sales,” says Anderson.

Looking Ahead

Pulley is optimistic about the future, yet he also sees the reality of fewer younger people entering the workforce, the high L&I rates, increasing operating costs, and a public that doesn’t fully understand the complexities of logging or realize that loggers are conservationists at heart. “The people I know, we want to protect the resource the best we can,” Pulley says. “We need to protect what we do…so it can continue in the future.” TW

Circle Reader Service Card 137

www.forestnet.com July/August 2014 TimberWest

SafetySpotlight

Safety at Tight Landings Travis Naillon, DOSH Safety Consultation

ftentimes, loggers are

challenged with tight landings. This creates several hazardous conditions: losing logs out the chute, having machines hold logs in place, logs sliding while chokers are being un-belled, and limited decking room. Over the past few years,

there have been hospitalizations of chasers and rigging crews from logs being lost out of the chute in tight landings. In some instances, landings cannot be made large enough and other mitigations need to occur, such as machine assist, but that should be a last resort.

Tips for small landings:

• Look at each job before moving in and have a plan. • If the landing is going to be too small, work with the landowner. • Have a jump-up landing, work with landowner or increase size, or change landing if possible. • Do not place yarder at edge of landing (if avoidable) to give more room. • Go over the landing at the pre-job safety meeting. • If the landing is too small and a machine must be used to hold logs in place, be cautious and: - Do not allow rigging crew to set chokers until there is no danger of logs being lost. - Ensure crew clears out far enough that if a log is lost they won’t be struck. - Keep good communication with the chaser and operator and do not allow them in until all logs are secured. - Keep turns smaller so the machine can grab all logs. - Processors and strokers can secure logs, but they are not designed to and logs can be lost easier. TW

TimberWest 2014 5252 TimberWest | July/August2014 | www.forestnet.com | July/August | www.forestnet.com

Circle Reader Service Card 138

Portable Grinders Bandit Industries

The Model 2600 and Model 2700 towable stump grinders combine aggressive horsepower in compact, lightweight designs that make stump grinding as easy as driving to the jobsite. Available with numerous options and reliable, beltless hydrostatic drive, the Model 2600 and 2700 are exceptional performers for rental companies, municipalities, and stump grinding professionals. variable infeed speed that automatically adjusts to engine load and an optional modem communications system that provides real-time system diagnostics. www.CBI-INC.com

Diamond Z

The hydrostatic direct-drive has no belts, jackshafts, bearings, or associated parts to maintain, making the operation and maintenance of these machines extremely simple and cost-effective. Power application with hydrostatic direct-drive is typically much smoother than traditional belt driven stump grinders, making these models a breeze to operate from swing-out control panels or optional radio remotes. The Model 2600 features a 61hp diesel engine, and the Model 2700 features a 97- or 115-hp diesel engine. Both models have a wide swing arc and adjustable tongues to help these machines grind even large stumps without needing to reposition the whole unit. Both machines ride on a rugged Torflex axle and go after stumps with swing arcs greater than five feet. Both come standard with the Revolution cutter wheel featuring telescoping tongues to help finetune their position at the stump. www.banditchippers.com

Continental Biomass Industries

CBI created their Magnum Force 5800 Grinder, applying the same principles to a machine designed for contractors dealing with lower production needs or transportation restrictions. The 5800 is a mid-sized upswing grinder built without compromising strength or performance. One of the primary design goals of the 5800 was to decrease the headaches caused by load restrictions and permitting. The offset helix rotor, anvil, and screen designs and dimensions remain similar to the 6800, while the rotor width has been decreased to less than 8’6”. The end result is a high volume grinder weighing 64,850 lbs with the capability of producing up to 100 tons per hour. The Magnum Force 5800 grinder is engineered for land clearing and logging companies as well as yard waste and demolition wood processors, and mulch yards who demand high-volume throughput and maximum reliability. The 5800 features a high lift upper roll for ease of maintenance; high torque, hydrostatic feed system; PT Tech hydraulic PTO; and a Caterpillar engine. The high strength drum rotor and screen system are shear pin protected. The entire system is controlled by CBI’s IntelliGrind logic incorporating a 54

TimberWest July/August 2014 www.forestnet.com

Diamond Z provides recycling firms worldwide with horizontal track grinders, featuring a tri-axle transporter option to meet the increased mobility requirements of today’s waste contracting firms. The DZH4000TKT is capable of processing in excess of 500 cubic yards of construction/green waste per hour. This midsize waste grinder with tri-axle transporter has a total transport weight of 98,000 lbs, with a fuel efficient Caterpillar C18 ACERT diesel available in all Tier II thru Tier IV Interim and Final versions. The key benefit of utilizing a Fluid Coupler transmission drive unit is that it produces a long-term service factor compared to competitive clutch options.

The DZ4000TK features a feed opening (54”x52”) and mill swing diameter (42”) that allow for oversized grinding requirements. The dual screen area is 3,800 square inches total, with screen changeout timeframes of twenty minutes or less. www.diamondz.com

Doppstadt

Doppstadt’s DW-Series Slow Speed Shredders shred various materials such as biowaste, C&D, waste wood, tree stumps, MSW, commercial and industry waste, and aggregates. The company uses a single-shaft roller and a nitrogen accumulator, which allows the comb to break away and reposition during operation, preventing uncrushables from damaging the machine and teeth. The DW shredders feature a hydraulic cooling system and fluid coupling power transfer. Options include Bio-Power, a tougher drive unit, higher throughput capacity, and an aggressive shredding roller offering 42 teeth (twice the standard 21 teeth). Other available options include a powerful Neodym Magnet for iron separation and a remote control for all main functions making it easy for one-man operation. (continued on page 56)

Circle Reader Service Card 139

TechReview (continued from page 54) These machines are powered by fuel efficient Mercedes Benz diesel engines that provide up to 610hp. Fuel consumption is as low as 11gph depending on the machine and material being fed.

Doppstadt West USA is the new, exclusive master distributor of high-quality Doppstadt machines and spare parts for the west coast: Washington, Oregon, Idaho, Nevada, California, Arizona, and Hawaii. www.doppstadtwestusa.com

Duratech

The 9564 Horizontal Grinder is equipped with a 48” wide oscillating stacking conveyor swings 40° from side to side and allows the operator to load material into a truck or onto an existing pile. An optional aluminum chute removes ferrous material from the finished product. The 9564 is powered by a 1050hp Caterpillar

electronic diesel engine, housed in an enclosed engine compartment to protect the engine and reduce noise. The 9564 horizontal grinder comes equipped with a 64”, 12,100pound hammer mill with 24 hammers, which is fed by a self governing floor apron and feed roller though a 60”x40” feed opening. The high capacity 315 cu. ft. hopper will handle the largest trees and stumps. A rotary self-cleaning screen provides constant air to the engine and radiator while reducing maintenance and providing easy access to the radiator for service. Four hydraulic stabilizer legs provide a steady platform while grinding.

The 9564 horizontal grinder also comes with a PT Tech HPTO15 self adjusting wet clutch which is controlled by a microprocessor with a built in torque limiter and brake that provide protection for the engine and drive line. The wet clutch is connected to the hammer mill by a 10-groove belt drive. In addition to the 9564 horizontal grinder Duratech also offers a complete line of tub grinders. www.duratechindustries.net

Morbark

The Morbark 6600 Wood Hog is an aggressive, productive grinder ideal for processing clearing debris, yard waste, storm debris and other mixed woody feedstocks into saleable products. With engine options up to 1,125hp, the 6600 has a 66” infeed opening for processing bulky material with ease. Like all Morbark Wood Hogs, the 6600 comes standard with the Morbark Integrated Control System to maximize production and engine efficiency; a laser-cut, factory-balanced rotor for durability; and an aggressive feed wheel with an internal Poclain drive that has no chains or sprockets for more torque and reduced maintenance.

The proven breakaway torque limiter driveline protection system protects against catastrophic damage from contaminants. With the optional Morbark Quick Switch Grinder-to-Chipper Conversion Kit, you can use the Morbark Wood Hog to produce high-quality biomass fuel chips or sawdust. Include the popular track option with 330L or 330EL Caterpillar undercarriage for the flexibility to easily bring the machine to the material. www.morbark.com

Peterson

Circle Reader Service Card 140

TimberWest July/August 2014 www.forestnet.com

Peterson’s largest horizontal grinder, the 6710D, is designed for operations that require a durable, high-output machine. It’s powered by a 1125hp Tier II Caterpillar C32 engine (or an optional Tier IVi Caterpillar C32 engine). With a feed opening of 50” x 66”,

TechReview the 6710D can process large stumps that were formerly reserved for tub grinders. It is particularly suited for land clearing operations or other applications where mobility is desired. With the R+ package, the 6710D can be configured as a midspeed grinder to handle heavily contaminated piles or a high speed grinder for typical land clearing operations. A three-stage grinding process with an up turning rotor and large grate area enables the 6710D to produce materials to exact specifications. The quick-change multiple grate system makes it easy to customize grate configurations to produce a wide variety of finished materials.

release system, which minimizes damage from contaminants. The anvil and first grate open on a severe impact, allowing the contaminant to be ejected, and then re-latch to permit continuous grinding. www.petersoncorp.com

Rawlings

The Rawlings Patented Super Hi-Inertia Hog is designed to run 24/7, 365 days a year. Its rotor is equipped with high mass moment of inertia and the operating costs per ton of material processed are low. Operating at low RPMs, the Super Hi-Inertia Hog still provides the crushing and shearing power needed to handle really tough jobs, like green waste, cypress, redwood, cedar, poplar, and a wide range of other stringy and fibrous materials while cutting processing time dramatically. The Rawlings Super Hi-Inertia Rotor was designed to maximize inertia while minimizing its weight and the Rocwear striker system have less down time and easier maintenance. This grinder is protected by an Anvil Safety Shear Swing Away that allows metal and other damaging objects to drop through to

The 6710D features Peterson’s Adaptive Control System, which monitors the grinding load and varies the speed of the feed system, accelerating when the engine load is light, slowing when the load is high, and reversing if the engine speed drops. It even monitors the engine temperature and varies the cooling fan speed to minimize power usage fuel consumption. Unique to Peterson Grinders is the innovative latching Impact

Circle Reader Service Card 141

www.forestnet.com July/August 2014 TimberWest

TechReview the out-feed conveyor. When the pins are sheared, a protection circuit shuts down the hog and conveyor. These wood waste recovery systems are available in stationary, portable, and skid-mounted systems; both vertical and horizontal models are available. Rawlings’ wood hogs come in all shapes and sizes, from simple stand-alone vertical hogs for saw mills, pulp, paper, power, and pellet plants to complete custom horizontal hog systems that can process material of any length such a logs, forest debris, and urban waste. www.wastewoodhogs.com

Rayco

The RH1754 Track Horizontal Grinder is now available in a self-propelled version that rides on a heavy-duty, steel track undercarriage. This adds another element of versatility to the 240hp RH1754, making it easier to move the machine around job sites and perform tasks like windrowing material or sorting material into different piles.

Rotochopper offers a variety of portable horizontal grinders from the 41’, 700-950 hp B-66 that produces high volumes of engineered fiber commodities by matching rugged reliability to precision grinding technology to the 35’, 275-350 hp MP-2 with its infeed design and patented colorizer system, that can convert a wide range of raw materials—wood chips, pallets, sorted C & D, slabwood—into premium colored landscape mulch. Rotochopper also manufactures specialized grinding systems, such as the CP-118 Wood Chip Processor. The CP-118 is designed exclusively to regrind and color wood chips to produce premium landscape mulch in a single pass. Rotochopper prides itself on customer support. Throughout North America, Rotochopper customers, Rotochopper equipment is sold and supported by factory-direct representatives, rather than dealerships. www.rotochopper.com

Vermeer

With low operating costs and versatility to process a wide range of materials, the RH1754 is the economical solution for reducing green waste, pallets, and lumber scraps while making high quality mulch. A variety of tooth and screen options allow operators to tailor the end product. Despite its compact size, the RH1754 has a wide infeed opening that accepts pallets and bulky material. Easily removable debris screens and reversing fans keep the radiator clear and extend service intervals. A magnetic head pulley on the discharge conveyor sorts out nails and light metals, and the screens can be changed in minutes to minimize set-up time. The towable version is light enough to be easily transported from one job to the next. On tracks it weighs just 20,500 lbs and is just under eight feet wide, to avoid the need for trailering permits. A wireless radio remote operates each track independently to provide precise control, and two- speed final drives allow for creep speed or high speed travel. www.raycomfg.com

Suitable for everything from large land-clearing jobs to greenwaste recycling, the Vermeer Tier 4i (Stage IIIB) HG4000, HG6000, and HG6000TX horizontal grinders have a number of features that make them ideal for a wide array of operators including the all-new chip drum, which allows the grinder to produce a consistent sized chip necessary for many applications such as biofuel chip production. The chip drum is a more robust, fully dedicated drum with knives, so there’s no switching back and forth as you would with a fuel chip attachment. One of the premier enhancements is the ability to modify chip size. Operators can add or remove spacers to achieve the desired chip size. The chip drum can produce chip sizes ranging from 0.125 to 1.50 inches with 0.125-inch increment adjustments.

Rotochopper

Rotochopper, Inc. manufactures an extensive lineup of wood grinding equipment. Rotochopper grinding equipment ranges from 127 to 950 hp. The grinders have superior particle size control and are popular in engineered fiber markets like colored landscape mulch, animal bedding, and fuel pellets. For mobile-grinding applications, Rotochopper offers four diesel powered grinders. For companies that do not require mobility, Rotochopper electric-powered grinders offer the same “Perfect In One Pass” technology with enhanced efficiency and less maintenance downtime. 58

TimberWest July/August 2014 www.forestnet.com

Another advantage of the new chipper drum is serviceability. A number of the high wear areas of the drum are protected by hardened steel parts providing longer life. These hardened steel parts are also replaceable via threaded fasteners to reduce labor costs and minimize downtime. Helping to minimize operator cost, screws have replaced the need for Babbitt on the knives. A user can now simply adjust the knife via thread fasteners quickly and safely rather than melting Babbitt. www.vermeer.com TW

Circle Reader Service Card 142

Idaho Adopts Montana Signs

The Idaho Logger reported that they are using helicopter signs much like their Montana Logging Association friends. “We now have on hand a supply of these bright yellow, heavy-duty signs that can help mark the spot for a helicopter landing on your logging site.” Using your GPS, you can determine the latitude and longitude, which is written on the sign. The Associated Logging Contractors (ALC) is selling the signs for $12.50 plus $1.00 for the stickers that go on

the sign. (Shipping is included in the price.) For more information, call 1-800-632-8743.

Montana Forest Products Week

The Montana Logger reported that Montana’s Legislature established the third week in October as Montana Forest Products Week, appreciating the locallymade wood products, forest stewardship, employment in the forest products industry, and access to public and private forests. This year’s events will run October 17-25. The kickoff event will be a three-day Habitat

for Humanity Blitz Build in Stevensville organized by the Society of American Foresters (SAF). The SAF is currently looking for volunteers to work the event — from swinging hammers to donating logs. There will be mill tours and open houses in St. Regis, Seeley Lake, Clancy, Deer Lodge, Missoula, Reid Point, Ashland, and Stevensville. There will be also be Chamber of Commerce Timber Tours in Kalispell and Missoula. Other events include a Walk in the Forest in Anaconda with the Deer Lodge High School and Walk in the Woods for 4th-8th graders from Ashland School.

Donate Your Used Equipment to Help Forest Operations Program

If you would like foresters graduating from the University of Idaho to be more familiar with logging, you can help out by donating your used equipment. All donations are tax deductible. The wish list for the forest operations program and Student Logging Crew includes: shop tools; medium to large excavator; self-loading truck; feller buncher; stroke or danglehead processor; rubber-tired grapple skidder; tracked skidder; swing yarder or yoder; and more. If you’re interested in donating, please contact Rob Keefe at (208) 310-2069 (robk@uidaho.edu) or Steve Hacker at (208) 885-7400 (shacker@uidaho.edu).

OSHA Regulation Goes Into Effect July 2014

Circle Reader Service Card 143

TimberWest July/August 2014 www.forestnet.com

In 2003, Oregon OSHA adopted Division 7 safety and health rules for forest activities, which included new requirements for all operator protective structures (cabs) on machines manufactured on or after July 1, 2004. The requirements incorporated ISO and SAE standards to help ensure operator protection from materials handled and rollover/tip-over hazards. Oregon OSHA later extended the 2009 compliance deadline to July 1, 2014 to give companies more time to cycle out their older machines. As of July 1, 2014, machines with 360degree, upper-structure rotation manufactured before July 2004 must have the same level of protection that 437-007-0775 requires for newer machines or they must be limited to: • Surfaces that are prepared, excavated, or constructed of solid materials with a slope less than 20 percent when handling logs or other materials • Use as an anchor for a cable-yarding system where there is a clear path of travel and slopes are 40 percent or less. www. orosha.org TW

Circle Reader Service Card 144

John Deere Brings Eight-Wheeled Harvester to North America

John Deere debuted an eight-wheeled version of the 1270E Interim Tier 4 (IT4)/Stage IIIB cut-to-length Harvester at Elmia Wood 2013. The stability and climbing ability of the eight-wheeled harvester has been praised by customers in Europe and is now available as an option on all of John Deere’s 1270E Harvesters in North America.

“The 1270E is our most powerful and productive harvester yet for steep ground,” said Pekka Leppanen, product marketing manager for John Deere. “With the addition of the eight-wheeled option, this machine is now more versatile than ever before, offering the best possible performance for our customers who work on demanding terrain.” The eight-wheeled option for the 1270E was specifically designed for steep slope and soft soil conditions. The eight-wheel drive provides superior traction and stability even in the most difficult of conditions. It also offers more power, higher ground clearance, a large approach angle, and strong Duraxle™ bogie axles with customized balancing gear units. These features allow the 1270E to perform well on steep slopes. www.JohnDeere.com

Like other Fecon tractors, the FTX290 features a spacious cab, operator comfort, and ergonomic control layout as well as maintenance friendly service access. Powered by a Cummins QSC8.3 290 hp diesel, the hydraulic flow to the mulching head peaks at 100 gpm. The FTX290 features the Fecon BH120 Forestry Mulcher with variable speed motors and three optional rotor systems including Fecon’s new Depth Controls Rotor (DCR) technology. Fecon DCR rotors feature the reversible Samurai Knife. The Samurai is incorporated into a depth control design that provides fast cutting in all materials and the most efficient use of horsepower. www.fecon.com

Cat® D Series Wheel Skidder

The new Cat® D Series Wheel Skidder increases productivity while reducing operating costs. Major improvements from the C Series include a six-speed transmission with more gears in the working zone; lock-up torque converter; independent front and

Fecon Introduces Mid-Sized Mulching Tractor

Fecon has added the FTX290 mulching tractor — a low ground pressure (3.4 psi) tractor with an oscillating steel track undercarriage, providing balanced traction for rough or soft conditions.

TimberWest July/August 2014 www.forestnet.com

Circle Reader Service Card 145

rear differentials for more pulling power and control; high capacity cooling system and reversing fan; a roomy, quiet, and cool operator station; and a tilting cab for servicing. “The D Series out pulls other skidders. It is also more stable and agile and gives the operator a smoother ride because we optimized the wheelbases and the component layout,” said Matt McDonald, product specialist for Caterpillar Forest Products. “The customer has a more versatile machine that is highly effective in sensitive applications such as first thinnings while maintaining the stability for working in tough conditions.” The line has four models to provide loggers with options to match their application and business needs: 203 hp Cat 525D, 225 hp Cat 535D, 250 hp Cat 545D, and the 275 hp Cat 555D. www.cat.com

“CHECKFIRE 110 provides a singlezone detection and actuation system for customers that want highly customizable fire suppression solutions that are easy to install and service and integrate seamlessly with their mobile equipment,” said Mark Neumann, director Pre-Engineered Systems, Tyco Fire Protection Products. “With this product, our customers can reduce costly downtime and repairs and instead focus on successful and safe operations.” www.tycofsbp.com

Lock-N-Lube

The Lock-N-Lube grease coupler has new and unique features: a set of clamping steel jaws, operated by a thumb lever and a spring-powered sliding sleeve, which prevents leaking and pop-offs, frees up both hands and puts the grease into the machine where it is needed. The thumb lever also prevents binding, allowing easy release, even

Super Grip Wheel Track 28MM Side-Link System SuperGrip Single Wheel Tracks are an alternative to wheel chains on 6 wheel drive harvesters, forwarders, and skidders. Once fitted, wheel tracks are designed to improve productivity through minimal maintenance and allow access to steeper, more demanding sites. The Single is supplied as standard with 3-2-3 Multi Studs.

under high pressure. Lock-N-Lube fits all Zerk types, both SAE and metric, fits into most recessed fittings and works with all grease gun types (1/8” NTP hose connection). A replaceable seal kit extends the life of this heavy duty grease coupler. www. locknlube.com.

Call today for the dealer nearest you.

Tyco Fire Protection Products launches ANSUL CHECKFIRE 110

Tyco Fire Protection Products (TFPP) introduced the ANSUL brand CHECKFIRE 110 Electronic Detection and Actuation System. Designed for mobile equipment that operates in harsh environments, the CHECKFIRE 110 system keeps operators informed of potential fire hazards and enables advanced fire suppression if flames occur, helping protect vital assets, such as personnel, property, and productivity for industries, including forestry and waste management/recycling.

8 0 0 . 3 2 3 . 3 7 0 8 | w w w. c l a r k t r a c k s u s a . c o m Clark Tracks are offered in the U.S. exclusively through Wallingford’s Inc.

www.wallingfords.com 207.465.9575 info@wallingfords.com

Circle Reader Service Card 146

www.forestnet.com July/August 2014 TimberWest

Komatsu Launches New PC240LL-10 Log Loader

Komatsu America Corp.’s PC240LL-10 Log Loader is the newest addition to its dash-10 series of log loaders. With a flywheel horsepower of 177 hp, the PC240LL-10 is powered by a Komatsu SAA6D107E-2 engine and is certified to EPA Tier 4 Interim and EU Stage 3B emissions standards. Built upon a proven Tier 3 engine platform, Komatsu has leveraged its leadership in technology and innovation to design a more environmentally-friendly engine that increases power while decreasing fuel consumption. This new EPA Tier 4 Interim-certified Log Loader replaces the former Tier 3 PC220LL-8 model. Weighing in at 83,985 pounds in log loader configuration, the PC240LL-10 has improved efficiency, 5% greater HP, lower fuel consumption, a new Oregon OSHA ROPS/OPS/FOPS/TOPS/WBC-certified forestry cab for

improved operator comfort, and enhanced serviceability to maximize productivity while lowering operating costs when compared to the previous model. The PC240LL-10 is available in log loader, processor head carrier, and road builder configurations. It’s equipped with the KOMTRAX® technology, which is fully integrated with Komatsu’s Tier 4 technology and sends machine operating information to a secure website utilizing wireless technology. www.komatsuforest.us

Tigercat D-series Loaders

Tigercat released its next generation 250D and T250D loaders this spring. The D-series loaders are powered by the Tigercat FPT N67 Tier 4i engine delivering 160 hp. The high horsepower Tigercat engine is extremely fuel-efficient and positions the 250D/T250D at the top end of its size class. The 250B and T250B loaders will remain available to markets outside of North America and Europe, where Tier 4 is not required. www.tigercat.com TW

Industry news At your FIngertIps There is a lot happening in the news today, and it’s hard to keep abreast of it all. TimberWest magazine has taken steps help readers stay current on breaking industry. We offer: daily stories

Each day industry news stories from around the region are posted on our website — www.forestnet.com. Just click and read. But if your time is in short supply, you may want to sign up for the… Forestnet newsletter

Every other week, you’ll receive new stories covering everything from harvesting to biomass to carbon credits. You can subscribe to the free online newsletter, just visit

www.forestnet.com Start receiving your news now!

Circle Reader Service Card 147

TimberWest July/August 2014 www.forestnet.com

A D IN D E X PG COMPANY RS# 49............ AGRI-TOOL & Supply..................................134 51............ ALLIANCE TIRE............................................137 57............ AMERICAN INTERNATIONAL.........................141 17............ BANDIT INDUSTRIES/BEJAC........................111 42............ BPT COMPONENTS & PARTS.......................128 13............ BRAKE SYSTEMS INC..................................108 12............ CARCO INDUSTRIES....................................107 7.............. CASCADE TRADER / DOOSAN......................103 19............ CATERPILLAR..............................................112 5.............. CATERPILLAR PRODUCT SUPPLIES..............102 44............ CLEANFIX NA..............................................131 13............ DUNLAP ENTERPRISES................................109 33............ FEENAUGHTY MACHINERY / DOOSAN..........123 30............ GB HARVESTER...........................................120 51............ GEM CHAIN.................................................136 37............ HAMILTON ENGINE......................................124 47............ HANGZHO QIRUI TOOLS...............................133 64............ JAMES G MURPHY CO.................................147 32............ JEWELL ATTACHMENTS..............................122 24-25....... JOHN DEERE...............................................116 44............ JORAL.........................................................130 28............ KOLLER NA / T-MECH..................................118 43............ KOMATSU AMERICA....................................129 55............ LBX/BEJAC CORP / TRIAD MACHINERY........139 39............ LOG MAX....................................................125 8.............. MCCOY FREIGHTLINER................................104 21............ MORBARK...................................................113 41............ OLOSFORS..................................................126 59............ OREGON LOGGING CONFERENCE................142 9.............. PETERSON..................................................105 31............ PETERSON CAT...........................................121 23............ PIERCE PACIFIC MFG...................................115 29............ PONSSE......................................................119 68............ QUADCO.....................................................149 22............ RAPID SPAN STRUCTURES..........................114 67............ ROTOCHOPPER...........................................148 56............ RYAN’S EQUIPMENT....................................140 62............ SELECT SAWMILL CO..................................145 11............ SOUTHSTAR EQUIPMENT.............................106 2.............. SUMMIT ATTACHMENTS..............................101 60............ T-MAR INDUSTRIES.....................................143 53............ TIGERCAT / TRIAD MACHINERY....................138 61............ TIMBER PROCESSING EXPO........................144 50............ VULCAN ON-BOARD SCALES.......................135 63............ WALLINGFORDS..........................................146 15............ WARATAH....................................................110 42............ WELDCO-BEALES MFG................................127 45............ WHITE MOUNTAIN CHAIN.............................132 27............ YOUNG CORP..............................................117

C LA S S I F I E D C AL E N D A R September 5-6 69th Annual Lake States Logging Congress, Oshkosh, WI 715-282-5828, www.timberpa.com September 11-14 Orofino Lumberjack Days, Orofino, ID 208-476-3412 www.orofinolumberjackdays.org September 25-27 Pacific Logging Congress 7th In The Woods Show, Molalla, OR 425-413-2808, www.pacificloggingcongress.org

End Greasing Frustration

Grease goes in, not on, the machine!

September 25-27 American Loggers Council Annual Meeting, Escanaba, MI 409- 625-0206, www.americanloggers.org October 5-11 Society of American Foresters National Conv. Salt Lake City UT 301-897-8720, www.safnet.org October 5-11 XXIV IUFRO World Congress, Salt Lake City, UT 301-897-8720, iufro2014.com

Lock and Lube 343 Dorchester Road Lyme, NH 03768

ORDER 24/7

LockNLube.com (603) 795-2298

October 8-10 National Hardwood Lumber Assoc. Annual Convention, Los Vegas, NV 901-377-1818, www.nhla.com

100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116

117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133

134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150

151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167

July/August 2014

www.forestnet.com July/August 2014 TimberWest

guest columnist

Time for Congress to Improve the Health of Forests, Rural Communities By Nick Smith

or too long, our elected officials in Washington, D.C., have avoided finding real solutions to the growing problems in our federal forests and local communities. As federal timber harvests have declined more than 75 percent since the 1990s, our forests have become more vulnerable to wildfire, insects, and disease. As logging and mill companies have closed, many of our communities have suffered from high unemployment and poverty. Fortunately, more of our elected officials are getting the message and are supporting permanent and comprehensive solutions for our federal forestlands. The increasing intensity of catastrophic wildfires has brought national attention to current federal land management policies. While we’ve seen some positive legislation pass in the current Congress, we have more work to do to increase timber harvests, increase the pace and scale of critical forest restoration projects, and put more people back to work.

Farm Bill

Bipartisan passage of the 2014 Farm Bill represents a positive step toward improving the health of our federal forests and rural communities. Among several provisions, the Farm Bill requires the Department of Agriculture to designate treatment areas on at least one national forest in each state (if requested by the Governor) that the department determines are experiencing declining forest health due to insect or disease infestation. If certain conditions are met, projects would be eligible for a 3,000-acre categorical exclusion for qualifying projects. Thirty-six states have requested designations thus far, totaling 45 million acres of at-risk federal forest lands. Though the Farm Bill offers many benefits for our forests and rural communities, it does not make significant changes to a system that promotes obstruction, delay, and constant litigation in federal timber sales and other forest health projects. Many in Congress recognize the need for solutions that ease the “analysis paralysis” and endless environmental lawsuits that prevent the active management of federal lands. 66

TimberWest July/August 2014 www.forestnet.com

Nick Smith

Reforming Federal Forest Management

In the current Congress, two bills have been introduced to reform federal forest management on a national level. H.R. 1526, known as the “Restoring Healthy Forests for Healthy Communities Act,” re-establishes the priority of actively managing our forests and promotes timber production on Forest Service commercial timber lands – areas that were specifically identified by the Forest Service for timber harvests. It requires the Forest Service to produce at least half of the sustainable yield of timber each year and, as required by law since 1908, share 25% of receipts with the counties to help fund schools and infrastructure projects. H.R. 1526 also includes provisions to restore management to much of western Oregon’s “O&C” lands administered by the Bureau of Land Management. The bipartisan provision would increase timber harvests while offering legal certainty against lawsuits. H.R. 1526 was approved by the U.S. House of Representatives on a bipartisan vote in September, 2013. National forestry legislation has also been introduced in the Senate. Wyoming Sen. John Barrasso introduced the National Forest Jobs and Management Act (S. 1966), which requires the U.S. Forest Service to implement commercial timber harvest projects on 7.5 million acres already deemed suitable for timber management over 15 years. It also tries to prevent delays due to litigation by requiring that lawsuits be resolved

through arbitration. Though it has received a hearing, S. 1966 is pending further action in the Senate Energy and Natural Resources Committee. No effective measure to restore management on O&C lands (including H.R. 1526 and S. 1966) has advanced through the Senate Energy and Natural Resources Committee in the current Congress. There appears to be little momentum in the Senate to address comprehensive federal forest reforms. Since Louisiana Sen. Mary Landrieu took control over the committee, it has taken no action on any measures that would meaningfully reform the management of federal forests.

Getting Legislation through Congress

Passing effective national forestry legislation through the U.S. Congress is difficult. Extreme environmentalists are well-funded, well-organized, and well-represented on Capitol Hill. To match the environmental lobby’s influence on our elected officials, it is important for everyone who supports active management of our federal forests to get involved. To express your support to your senators, call their offices, send them an e-mail, or attend a town hall. With the 2014 midterm election coming up, ask candidates at all levels of government where they stand on public land management and whether they’re willing to vote for the meaningful reforms we need to improve the health of our forests and rural communities. Healthy Forests, Healthy Communities was established in 2013 to give more citizens a voice in the management of federal forestlands. Our website’s Action Center makes it easy to send your elected officials an e-mail expressing your support for national forestry legislation. You can also sign up to receive our e-mail newsletter and learn about opportunities to get involved in your community. Please get involved. Together, we can make a difference for our forests and rural communities. Nick Smith is the Executive Director of Healthy Forests, Healthy Communities. You can find more on www.HealthyForests.org and follow Nick on Twitter and Facebook. TW

The proof is in the product Nothing opens more opportunities for your wood waste than a Rotochopper grinder. Whether you need to turn forestry slash to fuel, pallets to animal bedding, or slabwood to colored mulch, nothing offers a lower cost per ton or cubic yard.

Follow Rotochopper on

320-548-3586 www.rotochopper.com

• Unmatched versatility

• Minimal downtime

• Superior particle size control

• Electric or diesel

• Portable, stationary, or track

• 250 - 950 Horsepower

How can a Rotochopper grinder maximize the value of your wood waste? Contact us today to learn more.

Circle Reader Service Card 148

Circle Reader Service Card 149