Introduction. Federal Supply USA (FSUSA) was awarded the opportunity to offer Commercial kitchen Equipment, Furniture, and Supplies (Kitchen, Cafeteria, Institutional) in all California regions. Eligible purchasers, contact information, ordering instructions, and product and services are listed below and on the following pages.
Eligible Purchasers. This Master Contract may be utilized by any of the following types of entities:
California State Agencies. All state departments, offices, divisions, boards, and commissions
California Higher Education Institutions and School Districts. State Universities, Community, Technical colleges, and K-12 schools.
Local Governments. Any city, county, district, or other local governmental body or corporation.
FSUSA Ordering Instructions. Equipment and/or Service orders are initiated through the contacts or online as indicated below Online accounts will be created for each facility Once account is established, each customer can place orders, view invoices, and see tracking information as it becomes available.
Primary Contact: Meagan Larson
Phone: (888) 623-4499 ext 235
Fax: (847) 623-2425
Email: Meagan@federalsupply.com
Online Ordering: contact us to setup your online account
Invoicing/Payment. Invoices are emailed with typical 30-day net terms. Payment options include check, EFT payment, credit card payment, or other pre-arranged payment options.
Industry leader of food service equipment from pan racks to oven racks, keg racks and other shelving systems, carts and dollies, and a wide range of material handling equipment.
BUNPANRACK BUNPANRACK
FEATURES:
All welded aluminum
18" x 26" pan capacity
3" spacing
open top and sides
5" polyurethane swivel casters
NSF
Made in the USA
60 qt.
3 HP
Utilizes unique hybrid gear driven system
Change speeds on the fly
Two- piece, stainless steel, dishwasher
safe safety guard
Heavy-duty stainless steel bowl
Power bowl lift
FSUSA EXCLUSIVE PARTNERSHIP
The largest electric deck oven range in the world with over 80 different sizes available. The PizzaMaster electric pizza ovens are high temperature (932F) and deliver continuous high capacity.
2 DECK OVEN
3 DECK OVEN
GRIDDLE
PANINIGRILL PANINIGRILL FEATURES:
115V electrical
Stainless steel exterior
Heavy duty ceramic coated cast iron plates
Manual controls
Smooth cast iron plates
19.6" x 10" cooking surface
Adjustable temperature up to 572°F
Built-in timers
PANINI GRILL
& PPRESS1 5R
CONVECTIONOVEN CONVECTIONOVEN FEATURES:
Energy Star Compliant
Slide out control panel for full view servicing
Stainless Steel front, top, and sides
Dependent glass doors (Full 180° opening)
Stay cool heavy-duty door handle
Forced cool down fan mode
Interior oven lights
Ventless
THE GOLD THE GOLD STANDARD IN STANDARD IN ACCELERATED ACCELERATED COOKING! COOKING!
MICROWAVE RCS10TS
MICROWAVE MICROWAVE FEATURES:
Durable Design
Spacious Interior
Stainless steel interior and exterior
Versatile Controls
100 programmable menu items for consistency
Five power levels to ensure easy customization.
Braille touch pads
Sturdy Handle
See-Through Door
RANGE RANGE FEATURES:
Stainless steel front, sides, back riser, shelf and legs
MIG welded aluminized steel frame for added
durability
Six 9" round, 2 KW French plates with infinite heat control switches
Full width pull out stainless steel crumb tray
Thermostat adjusts from 200°F to 550°F
Cool to the touch control knobs and oven handles
5 KW oven with top browning control
Each oven has one oven rack and three rack positions
FEATURES:
45-quart bowl
5 HP motor
Clear Lexan® pour-through bowl cover lets you monitor as it’s processed
For over 80 years, Utility Refrigerator has endeavored to be a thoroughly reliable, uncompromisingly dependable source of quality refrigeration equipment.
REFRIGERATOR
R-25-SS-1S-D
REFRIGERATOR REFRIGERATOR FEATURES:
Stainless steel front, door, rails and top-mount
Self-closing door hinges with stay-open feature at 120 degrees
Heavy-duty, built-in security cylinder door lock
Automatic interior LED lighting
Four adjustable chrome plated wire shelves
Adjustable 6" heavy-duty legs or 6" casters in lieu of legs
Top-mounted compressor
Expansion valve refrigeration system
One 10 foot electrical cord with 3-prong grounded plug
Master power switch
HEATEDCABINET HEATEDCABINET FEATURES:
Top-Mounted Heat System
Flexible and Adjustable Tray Slides
Accommodate various tray and pan sizes, including 12" x
20" pans, 18" x 26" sheet trays
User-Friendly Controls
The temperature range of 90°F to 190°F offers precise control
Slim Design for Tight Spaces
Built for Transport
Energy-Efficient and Eco-Friendly
Reinforced handles
Heavy-duty casters
Full-perimeter bumper provide added durability and ease of movement
REFRIGERATOR REFRIGERATOR FEATURES:
Integrated ICELINQ App ®
Upgraded Sensors
Preservation Mode maximizes uptime and notifies users of potential issues.
Designed, Engineered, Assembled in USA
Removable, External Air Filter
WaterSense Adaptive Purge optimizes water consumption
Antimicrobial Protection
Unit Specific QR Code provides quick access to service manuals
External bin full indicator light
SCOTSMAN IS DEDICATED TO SCOTSMAN IS DEDICATED TO DEVELOPING NEXT-GENERATION DEVELOPING NEXT-GENERATION TECHNOLOGIES THAT MAKE ICE TECHNOLOGIES THAT MAKE ICE PRODUCTION MORE PRODUCTION MORE CONVENIENT, EFFICIENT AND CONVENIENT, EFFICIENT AND RELIABLE. RELIABLE.
ICE MAKER/BIN MC0322MA-1
B530P
FSUSA EXCLUSIVE PARTNERSHIP
Steril-Sil was one of the first manufacturers to introduce the use of nylon plastic to the food service equipment industry. Heavy-duty, injection-molded nylon cylinders soon became the industry standard.
REFRIGERATOR REFRIGERATOR FEATURES:
Stainless steel
Enclosed base
Hinged & locking door
Corner bumpers
Integrated handles (4) locking casters
Non-marking casters
Made in USA
ROCKING CHAIR
146484BG
SABRE CHAIR
96484BG
FEATURES:
Durable, one piece, rotationally molded design for increased strength. Constructed of high impact "no break" polyethylene. No steel or wood components (Excluding the Endurance Locker)
Bolt to floor or wall with optional Bolt Down Kit.
Stain resistant. Easily sanitized. Easy to clean & maintain.
Flame Retardant (passes Cal 133) Test reports available upon request.
THESTACKERTRAY THESTACKERTRAY
FEATURES:
5 compartment Stacker Tray, co-polymer.
Flatware slot separates hot and cold food to help keep temperature.
Stackable, no lid required (but available). Domed underside
Small size fits cell door slots.
Dishwasher safe.
12 trays per case
Made in the USA.
3Year Warranty
THECHUCKWAGON
FEATURES:
Food delivery cart is a one piece, insulated food tray delivery cart
Designed for continuous, intensive use in the toughest environments.
Insulated walls provide maximum heat retention.
Two sliding doors are insulated and easy to remove for cleaning
o Locking hasp is available.
Holds 60 X-Trays and 80 Rock Trays
Specially formulated with high impact polyethylene for maximum strength
Chemically resistant to blood, vinegar, chlorine, and other hazardous fluids
10Year Warranty
THEROCKFEATURES:
Available Colors for Trays and Lids: Brown, Dark Gray, Orange, Terra Cotta
One piece insulated food tray, that has no seams or internal insulation; will not absorb liquids.
Radius corners and beveled edges make it easier to eat from, and easier to clean.
10-year manufacturer's warranty against breakage, cracking, or leakage 5 compartments and will stack with or without lids
Fits 132 trays in the Chuckwagon, 80 trays in the Chuckwagon Jr., and 156 trays in the tray
C1717 Matching Lids
CHUCK WAGON
ADDITIONAL INFORMATION / SERVICES
Customer Service/Sales Support
Available Monday–Friday, 8am–5pm CST by phone or email. Fully trained to support sales (product knowledge), accounting (ERP systems), warehouse (tracking), and marketing.
Sales Support contacts manufacturers every 72 hours for order updates. Updates are entered into the system and notification sent to the sales team so they can inform customers.
Response time goal is within 24 hours of initial customer contact
Immediate response required during or after hours may be sent to info@federalsupply com
Installation. Please reach out to your sales representative to discuss costs involved with the following services:
Equipment Installation
New equipment assembly and final connections to existing utility. Existing equipment disconnection and relocation to existing utility. Turnkey offerings for all kitchen and laundry equipment.
Inside Delivery
To a specific location inside the facility or on the property by a service agent for installation.
To a specific location inside the facility or on the property off LTL shipment.
Equipment Removal / Disposal. A network of CFESA and OSHA compliant service agent is used for removal and installation services, including but not limited to:
Equipment removal to a specific location on the property. Properly recycle/dispose of equipment off property
Equipment pickup for return to manufacturer
Equipment transfers from one location to another
Important note regarding disposal – Strict code requirements through local jurisdictions must be followed for all kitchen equipment disposal or recycling (when available).
Order Exchange / Modification. Instructions will be sent to the customer by email and will include:
Shipment labels
Contact information for the transportation company ETA on the replacement item
Extended Lead Times. Prior to submitting the order to a manufacturer on behalf of the State of Washington, lead times will be communicated immediately to ensure needs are met. If lead times do not fall within these, Federal Supply USA will consult and advise on other options available.
Order Cancellation / Return Policy. Please contact your sales representative to discuss the cancellation or return of any order. While it is always the goal to ensure there are no fees in these circumstances, due to the current supply chain, this must be discussed with the Manufacturer before doing so.
Extended Warranty. Although options might be limited with some manufacturers, most offer additional one- or two-year warranty on their products. Please reach out to your sales representative for current manufacturer extended warranty options and pricing
Travel Costs. Travel costs may be incurred for the following services Please reach out to your sales representatives to discuss costs associated with the following:
Site Visits. Site visits may include the following services:
Kitchen consultation for remodel or new construction, dish rooms, exhaust hoods, walk-in coolers/freezers
Equipment Substitution. If a manufacturer can no longer provide a product, FSUSA will consult with customer to find a suitable replacement at no additional charge.
Additional Discounts. Individual purchase orders issued in the amounts below will qualify for an additional discount that will be shown as a line item on the facility’s invoice.
$100,000 – $199,000 = 1% discount off entire order
$100,000 – $299,000 = 2% discount off entire order
$300,000 or more = 3% discount off entire order
Energy Star Rebates. A spreadsheet will be provided to the operator with the list of utility companies in the State of Nebraska that offer rebates for the specific pieces of equipment that qualify Rebates are typically issued directly from the utility company to account holder
Delivery. Orders up to $5,000.00. All orders less than $5,000 00 may be shipped prepaid and allowed (with freight included in the price), to the ordering entity’s receiving dock or warehouse, or as otherwise instructed on the purchase order by the ordering entity. In those situations, in which the “deliver-to” address has no receiving dock or agents, the Contractor must be able to deliver to the person specified on the purchase order. The ordering entity may use the Contractor for delivery, may pick up the equipment, or may contract with another entity for delivery. Orders over $5,000.00. All orders that are $5,000.00 or more must be shipped freight prepaid and added (with freight allowed as a separate line item), to the ordering entity’s receiving dock or warehouse, or as otherwise instructed on the purchase order by the ordering entity. In those situations, in which the “deliver-to” address has no receiving dock or agents, the Contractor must be able to deliver to the person specified on the purchase order.
