ST24-007ER0
Reduction of Flow Rate and Uniform Coating for Chemical Application on Paper, Sheets, Aluminum Foil, etc. Pneumatic Nozzles: Ultra-Low Flow Rates Down to a Few mL/min, Large Flow Passages, and Wide Flat Fan Spray Challenges
・Desire to reduce the spray volume of chemical solutions or oils—a requirement that conventional nozzles cannot meet. ・Narrow spray angles of the nozzles cause noticeable non-uniform coating depending on the nozzle arrangement and spacing. ・Need to adjust the flow rate according to operating conditions—a highly time-consuming process.
Solution
・To prevent fine particles from adhering to thin-film products, an anti-adhesion agent is applied. However, the spray volume is excessive, and scattering is highly noticeable. Proposed a pneumatic nozzle that delivers ultra-low flow rates. It features a large flow passage to prevent clogging, as well as adjustable spray patterns and angles. By adjusting the flow and pattern, the optimal conditions were determined, successfully reducing the spray volume. Product
Mini Atomizing Nozzle (Adjustable Spray Type with ON/OFF Valve) Pattern air(PA) Liquid(L)
Pilot air
EVERLOY SHOJI CO., LTD.
Overseas Sales Department 4-2-24, Sagisu, Fukushima-ku, Osaka 553-0002, Japan
YouTube
WEB: https://www.everloy-spray-nozzles.com/en/ Email: overseas_sales@everloy.co.jp Copyright 2026 Everloy Shoji Co., Ltd.
Confidential