Let’s Build!
Create an alarm system for your ‘safe’.
Instructions
Workspace
Instructions
Turn on and pair: ● 1 Light Sensor block ● 1 RGB LED block and drag onto the workspace. Also drag on: ● 2 Compare blocks ● 2 Colour blocks. In the settings of the Compare blocks, set as follows: ● 1st: ‘≥ 30’ ● 2nd: ‘≤ 29’.
Workspace
Connect the blocks as shown.
In the settings of the Colour blocks, set as follows: ● 1st: red ● 2nd: yellow.
Ⓒ 2019 SAM Labs
1