Renold ketting transmission chain by ERIKS Nederland

India Coimbatore

Tel: + 61 (0) 3 9262 3333 Fax: + 61 (0) 3 9561 8561 e-mail: melsmg@renold.com.au

Tel: +91 - 422 4226800 Fax: +91 - 422 2532358 e-mail: marketing@renold.in

also at: Sydney, Brisbane, Adelaide, Perth, Newcastle, Wollongong, Townsville

Austria Vienna Tel: + 43 (0) 1 330 3484 Fax: + 43 (0) 1 330 3484-5 e-mail: office@renold.at

Malaysia Selangor Darul Ehsan Tel: + 60 3-5122 7880 Fax: + 60 3-5122 7881 e-mail: malaysia@renold.com

Singapore Tel: + 65 6760 2422 Fax: + 65 6760 1507 e-mail: sales@renold.sg

South Africa Benoni (Johannesburg) Tel: + 27 11 747 9500 Fax: + 27 11 747 9505 e-mail: sales@renold.co.za

also at: Johor Bharu, Ipoh, Penang

also at: Richards Bay, Port Elizabeth, Cape Town

also at: Budapest (Hungary), Zlin (Czech Republic)

Netherlands Amsterdam

Spain Gavá (Barcelona)

Belgium Gent

Tel: + 31 (0) 20 6146661 Fax: + 31 (0) 20 6146391 e-mail: info@renold.nl

Tel: + 34 93 638 9641 Fax: + 34 93 638 0737 e-mail: spain@renold.com

Tel: + 32 (0) 9 242 95 50 Fax: + 32 (0) 9 242 95 59 e-mail: info@renold.be

New Zealand Auckland

Switzerland Dübendorf (Zürich)

Canada Montreal (Quebec)

Tel: + 64 9828 5018 Fax: + 64 9828 5019 e-mail: aksales@renold.co.nz

Tel: + 41 (0) 44 824 8484 Fax: + 41 (0) 44 824 8411 e-mail: duebendorf@renold.com

also at: Christchurch

also at: Crissier (Lausanne)

Philippines Paranaque City

UK Burton upon Trent

Tel: + 63 2 829 6086 Fax: + 63 2 826 5211

Tel: + 44 (0) 1283 512940 Fax: + 44 (0) 1283 512628 e-mail: ukchain@renold.com

Tel: + 1 514 367 1764 Fax: + 1 514 367 4993 e-mail: inquiry@renoldcanada.com

China Shanghai Tel: + 21 5046 2696 Fax: + 21 5046 2695 e-mail: sales@renold.cn

France Seclin Tel: + 33 (0) 320 16 29 29 Fax: + 33 (0) 320 16 29 00 e-mail: contact@brampton-renold.com

Germany Einbeck Tel: + 49 (0) 5562 810 Fax: + 49 (0) 5562 81130 e-mail: info@renold.de

Transmission Chain

Australia Melbourne (Victoria)

Transmission chain

Poland Tel: + 48 663 842 487 e-mail: info@renold.pl

Russia Moscow Tel: + 7 495 645 2250 Fax: + 7 495 645 2251 e-mail: info@renold.ru

USA Morristown TN Tel: + 1 800 251 9012 Fax: + 1 423 581 2399 e-mail: sales@renoldjeffrey.com

For other country distributors please consult www.renold.com.

Scandinavia Hvidovre (Copenhagen)

Whilst all reasonable care is taken in compiling the information contained in this brochure, no responsibility is accepted for printing errors.

Tel: + 45 43 45 26 11 Fax: + 45 43 45 65 92 e-mail: infor@renold.com

All information contained in this brochure is subject to change after the date of publication.

www.renold.com

I Renold Transmission Chain Catalogue

Renold Chain Product Range

Roller Chain • British, ANSI, API, DIN, ISO and Works Standard Chains • Adapted Chains • Extended Pitch Chains • Hollow Pin Chains • Made to Order, Special Chains • Mini Pitch Chains

• • • • • • •

Nickel Plated Chains Oilfield Chains Plastic Bush Chains Power and Free Chains Polymer Block Chains Side Bow Chains Stainless Steel Chains

Applications • Abattoirs • Air Conditioning • Aircraft - Civil & Military • Bakery Machines • Battery Manufacturing • Brewing • Canning • Carpet Machines • Chart Tables/Marine • Chocolate Manufacturing • Concrete Moulding Equipment • Copying Machines • Dairy Machinery • Drying Machinery • Earth Moving Equipment • Extrusion Machines • Filtration Plants • Food & Drink Manufacture • Glass Manufacture • Health Care Equipment • Hydraulic Components • Ice-Cream Manufacture • In-flight Refuelling • Ingot Casting & Scrap Metal Processing • Latex Machinery • Laundry Machinery • Lawnmower Manufacture • Mill Machinery • Mining • MOT Brake Testing Machinery • Nuclear Power • Off Road Vehicles • Oil Industry • Packaging Machines • Paper & Card Making • Paper Shredders • Plastic Machinery • Potato Grading Machinery • Power Generation • Printing Machines • Quarry Plant • Road Making & Plant Machinery • Robotic Systems • Roof Tile Manufacture • Ship's Engines • Silkscreen Machinery • Ski-Lifts • Soot Blowers • Steel Making • Straddle Carriers • Sugar Beet Machines • Sun-Blinds • Telecommunications • Textile Machinery • Timber and Woodworking Machines • Tin Printer Ovens • Tobacco/Cigarette Machinery • Tunnelling Machines • T.V. and Audio Equipment • Tyre Manufacture • Waste Handling • X-Ray Equipment

Conveyor Chain • British, ISO and Works Standard Chains • Adapted Chains • Agricultural Chains • Bakery Chains • Deep Link Chains

• • • • •

Escalator Chains Made to Order, Specials Stainless Steel Chains Sugar Cane Chains Zinc Plated Chains

Applications • Abattoirs • Agricultural Machines • Bakery Machines • Bottle Washing Plants • Brick & Tile Machinery OEM • Car Plants • Cement Plants • Chemical Plants • Chicken Process Equipment • Cigarette/Tobacco Machinery • Dust Filters • Egg Sorting Conveyors • Electrical Switchgears • Escalators • Extrusion Machines • Feed Mill Machines • Feed Silo Equipment • Fibreglass Industry • Filtration Plants • Fish Conveyor • Food Sterilisation • Food Processing • Freezing Equipment • Freezing Tunnels • Glass Manufacturing • Grain Conveyor • Harvesting Machines • Ice Cream Machines • Induction Furnaces • Ingot Casting & Scrap Metal Processing Mfr • Latex Machinery • Leisure Rides • Luggage & Parcel Handling • Machine Tools • Mail Sorting • Metal Casting • Mushroom Compost Machinery • Nuclear • Ovens/Provers • Potato Grading Machinery • Potting Machinery • Quarries • Radio Astronomy • Roof Tile Manufacture • Rope Machinery • Saw Mill Equipment • Sewage Plants • Shaker Conveyors • Ski-Lifts • Sluice Gates • Steel Making • Sugar Factories • Swarf Conveyors • Textile Machinery • Timber & Woodworking Machines • Tool Changer • Tunnelling Machines • Tyre Manufacture • Washing & Sterilising Machines • Water Treatment • Wire Belts

Lifting Chain • LH(BL), AL, LL and Works Standard Chains Applications • Bottle Washing Plants • Cement Plants • Chemical • Counterbalance Sets • Cranes • Dust/Swarf Conveyors • Elevators • Food Processing • Food Sterilisation • Fork Lift Trucks • Pipe Line Valves/Taps • Printing Machines • Rock Drilling • Straddle Carriers • Sun-Blinds • Tail Lifts

Renold Transmission Chain Catalogue

Table of Contents

Section 1 - BS and ANSI products and dimensions

Section 2 - Industry applications

Precision Roller Chain, Parts & Connecting Links

Solution chains from Renold

Renold Synergy roller chain

Renold Syno NP chain

Renold Syno PB chain

Renold Syno PC chain

Renold Hydro-Service chain

Renold Sovereign

Stainless Steel chain

Zinc Plated chain

Nickel Plated chain

Renold roller chain

Renold A&S roller chain

Renold SD roller chain

Renold ANSI Xtra roller chain

Renold Multiplex chain

Straight Side Plate chain

Cranked Link chain

Hollow Pin chain

Double Pitch chain

Sidebow chain

Standard BS attachments

Standard ANSI attachments

Renold Klik-Top chain

Renold Polymer Block chain

Renold Smartlink

Renold Roll-Ring

Sprockets

Transmission Counterweight Sets

Rack Sets

Roller Chain Guides

Pin Extractors and Spray Lubricant

Examples of Renold Chain in action

I Renold Transmission Chain Catalogue

Section 1 European (BS) & ANSI Products & Dimensions

Renold Transmission Chain Catalogue

The Renold precision steel roller chain is a highly efficient and versatile means of transmitting mechanical power, which, in the field of industrial applications, has almost completely superseded all other types of chain previously used.

Outer plate Bearing pin Inner plate

The illustration below shows component parts of the outer link and of the inner link of a Renold simple roller chain.

Bush

As illustrated, the Renold precision steel roller chain consists of a series of journal bearings held in precise relationship to each other by the constraining link plates. Each bearing consists of a bearing pin and bush on which the chain roller revolves. The bearing pin and bush are case hardened to allow articulation under high pressures, and to contend with the load carrying pressures and gearing action imparted via the chain rollers.

Roller

Inner plate

All chains are classified according to pitch (the distance between the centres of adjacent bearing pins), roller diameter and width between inner plates. Collectively, these dimensions are known as the gearing dimensions, as they determine the form and width of the sprocket teeth. Standard links The chain parts and connecting links illustrated are only indicative of the types available. Please refer to the appropriate product page for the parts relevant to individual chains. No. 4 Inner Link (BS/DIN) Roller Link (ANSI)

These are complete assemblies for use with all sizes and types of chain. The unit consists of two inner plates pressed on to the bushes which carry the rollers. (Inner links for use with bush chains have no rollers). No. 107 Outer Link - Press Fit (BS/DIN) Riveting Pin Link - Press Fit (ANSI)

For use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over after the plate is fitted. Press fit connecting links should only be used once; new links must be used to replace dismantled links. (See 'Riveting Chain Endless' for full instructions).

Section 1

Precision Roller Chain, Parts and Connecting Links

Outer plate

Cranked links No. 11 Connecting Link - Slip Fit (BS/DIN/ANSI)

A connecting link supplied with two connecting pins riveted into the outer plate. The outer plate is a clearance fit on the connecting pins and is secured in position by a split pin through the projecting end of each connecting pin. No. 26 Connecting Link - Slip Fit (BS/DIN/ANSI)

Used on short pitch chains only. Supplied with two connecting pins riveted into the outer plate, the clearance fit connecting plate being secured by means of a spring clip, No. 27, which snaps into the grooves in the pins. No. 58 Connecting Link - Press Fit (BS/DIN/ANSI)

The standard connecting link for ANSI series detachable chains, also used on riveted chains where high speeds or arduous conditions are encountered. Supplied with two connecting pins riveted into the outer plate, the other outer plate being a press fit onto the pins and secured by split pins after assembly. Press fit connecting links can only be used once; new links must always be used to replace dismantled links.

Apart from the specialised chains where the cranked link is an essential design feature, cranked links are used only where the chain length must be an odd number of pitches. This practice is not recommended; all drives should, wherever possible, be designed with sufficient overall adjustment to ensure the use of an even number of pitches throughout the chain. DO NOT USE CRANKED LINKS ON IMPULSIVE, HIGHLY LOADED OR HIGH SPEED DRIVES. No. 12 Cranked Link - Slip Fit (BS/DIN) Offset Link - Slip Fit (ANSI)

A single link with cranked plates pressed onto a bush and roller assemble at the narrow end. A clearance fit connecting pin (No. 128) is fitted at the wide end and is secured by a split pin. No. 30 Cranked Link Double (BS/DIN) Two Pitch Offset Link (ANSI)

Double cranked links are available for most sizes and types of chain. The unit consists of an inner link (No. 4), with cranked links retained permanently in position by a riveted bearing pin. Screw operated extractors break chain by forcing the Renold end softened bearing pins out of the outer link plates. For other brands of chain, the rivet swell must first be ground away.

I Renold Transmission Chain Catalogue

Section 1

Solution Chains from Renold Strong. Powerful. Even better performance. Synergy was created to meet a specific requirement of our customers: Improved chain performance resulting in better value. Synergy is the only true high-performance chain on the market. Engineers and maintenance professionals around the world endorse the wear resistance and exceptional working life of this remarkable chain technology.

And the best just got better… New specially formulated lubricant has improved initial wear life by up to 50%. Renold Synergy should be lubricated as normal when in operations.

Improved fatigue resistance Plate and connecting link design optimises stress distribution and fatigue performance. Synergy® performs, on average, 30 percent better than other brands under repeated shock loading and continual heavy loads. Better wear resistance Independent tests show Renold Synergy® performed up to six times better than the highest quality competitor’s chain. Built to perform Each component of Renold Synergy® is engineered to perfection using cutting-edge design tools such as Finite Element Analysis (FEA). It all adds up to chain performance that exceeds the sum of its parts. Plate Shape Wide waist profile for improved stress distribution; plate thickness maximised within the constraints of the Standard.

Bushes Solid extruded bush provides improved roundness and strength compared to curled bushes. Profiled ends improve bearing area and extend wear life. Hole Quality Triple punch holing ensures controlled positional location of pin and bushing for even wear. Interference Fits Optimised to ensure maximize fatigue life. Fatigue Resistance Pre-stressed surfaces increase fatigue resistance. Wear Resistance Profiled components and special pin surface coating enhance wear resistance. Connecting Link Unique in design, allowing for a chain system with no component weaker than another. Exclusive! Our unique end-softened pins cut to length quickly and cleanly using just one tool. Get up and running faster than ever before. Our platinum-coloured connecting links stand out against the black surface plates, so they’re easy to identify and remove. Synergy® lasts longer and resists greater shock loads, making it the most reliable chain on the market. Renold Synergy®

Performance and value redefined Renold Synergy® lasts up to six times longer than other brands.

Renold Brand

Best of the competition

Renold Transmission Chain Catalogue

The Renold Syno range sets a new benchmark for lube-free performance. Renold Syno NP chain

Renold Syno PC chain

Renold Syno PB chain

This dry-to-the-touch chain now includes more performance enhancing characteristics than ever before. Using the latest techniques, Renold have incorporated special surface treatment processes to improve the bonding of the nickel plating. This type of plating is not prone to chipping or peeling as some other plated chains are prone to doing.

Renold has added to its impressive Syno range of chain for applications where lubrication is either difficult or impractical. The latest element is the introduction of a poly-steel chain, Renold Syno PC chain, comprising a polymer inner link and stainless steel pins and outer plates.

For higher loads and more heavy-duty applications, the Renold Syno range takes on the serious business of wear and fatigue resistance through the addition of a polymer sleeve between the pin and bush.

The pin coating minimises friction, improving wear life and reducing vibration, while the FDA-approved coating on the roller and the USDA H1-approved lubricant within the chain make it ideal for food processing environments.

• • • • • •

Dry-to-the-touch chain Never needs relubrication FDA-approved coating on rollers Nickel-plating on plates won’t chip or peel Good resistance to corrosion

Food industry-approved lubricant inside chain when supplied

With no metal bush or roller there is no lubricant required to facilitate metal-on-metal movement. This opens up applications where the chain could even run submerged in water if required. This construction also means the chain is corrosion resistant, light weight and versatile. Attachments can be fitted to the outer plates if required.

• No lubrication required • Can operate in wet conditions, even submerged

• Lightweight construction • Attachments can be added

polymer bush – exclusive to Renold

• Polymer roller tested for impact resistance and load capabilities

• Can be operated without any lubrication • Available in 28B – 40B and ANSI 120 to 200 Ideal for applications where it is not possible or not advisable to lubricate a chain, Renold Syno Polymer Bush chain can be considered for:

• Outdoor or wash down environments • Car assembly plants or steel mills • Environments where lubrication may contaminate products

• • • •

• Standard chain dimensions so can be exchanged "like for like"

• Will run on standard sprockets • BS: ½" to 1½" simplex and duplex

(06B-1 to 24B-1 and 06B-2 to 24B-2)

• ANSI: ½" to 1¼" simplex and duplex (40-1 to 100-1 and 40-2 to 100-2)

Forestry; saw mills or paper mills Textile plants Mixers Environments where lubrication may cause contaminants to stick to the chain and possibly get into bearing areas, seizing up the chain.

With a corrosion resistant surface treatment adding to the variety of applications it can cope with, Renold Syno Polymer Bush chain is a truly versatile product.

Renold Syno Nickel Plated chain outlasts any comparable competitor product promoted as low-lube or non-lube.

Syno NP

• Absolutely no lubrication • Highly durable and wear resistant

Syno PC

Syno PB

Section 1

Solution Chains from Renold

I Renold Transmission Chain Catalogue

Section 1

Solution Chains from Renold Nickel Plated chain Renold Nickel Plated chain delivers excellent corrosion protection. Ideal for applications such as bottling where spillages can lead to corrosion the specification for this chain is designed to optimise its performance. Every modification is made to push the wear and fatigue resistance to the maximum as well as delivering corrosion resistance.

Features and benefits:

• Hexavalent chrome free • 400 hours corrosion protection during salt spray tests to DIN 50021

• Cold extruded, solid bush and roller delivering maximum Renold performance

• Plates and rollers shot peened to our exact specifications

• Wear and fatigue resistance that delivers maximum working life

• Lubrication that improves wear performance • Tensile strength is approximately 85% that of standard carbon steel chain

Stainless Steel chain Renold Stainless Steel chain is made from high grades of rust-proof steel. These perform extremely well in environments that are acidic, alkaline, where direct contact with food is a consideration, where the chain will be exposed to water, and for very high or very low temperature locations ( -40° to +400°C ) where resistance to corrosion is a requirement.

Features and benefits:

• All components made from rust-proof steel • All components receive surface finishing to remove stress raisers

• Lubrication that improves wear performance • Tensile strength is approximately 65% that of standard carbon steel chain

Renold Stainless Steel chain should be selected when resistance to chemical action is critical. It is manufactured using FDA approved material and is prelubricated with USDA H1 approved lubricant.

Zinc Plated chain This is a new zinc plating from Renold. Ideal for applications susceptible to light corrosion, the new plating has one consistent appearance, replacing the yellow and blue chromated versions previously available and delivering the same high levels of corrosion resistance. Every component is plated before assembly and the chain has improved wear resistance under normal loads due to the new surface treatment.

Features and benefits:

• Hexavalent chrome free • 250 hours corrosion protection during salt spray tests to DIN 50021

• Cold extruded, solid bush and roller delivering maximum Renold performance

• Plates and rollers shot peened to our exact specifications

• Wear and fatigue resistance that delivers maximum working life

• Lubrication that improves wear performance • Tensile strength is approximately 85% that of standard carbon steel chain

Renold Transmission Chain Catalogue

Renold Hydro-Service Renold Hydro-Service chain delivers superior corrosion resistance, lasting as much as 30 times longer than standard carbon steel in applications that have to deal with water or salt spray. It is ideal for wash-down environments. Hydro-Service chain is also more economical, and stronger, than stainless steel.

Features and benefits:

• Superior corrosion resistance • Last as much as 30 times longer than standard carbon steel

• Hexavalent chrome free • 350 hours corrosion protection during salt spray tests to DIN 50021

Each component is mechanically treated prior to assembly to ensure consistent, secure protection. The surface treatment is free of hexavalent chrome, complying with legislation relating to environmental and health & safety considerations.

• Cold extruded, solid bush and roller delivering maximum Renold performance

• Plates and rollers shot peened to our exact specifications

• Wear and fatigue resistance that delivers maximum working life

• Lubrication that improves wear performance

Renold Sovereign Some applications demand a specific solution. Trying to run a standard specification chain in a harsh environment will lead to dramatically reduced working life, possible chain failure and expensive downtime and all this can be avoided by specifying the chain that’s designed for the job. Abrasive environments such as brick and tile manufacture, which are characterised by dust and debris, are perfect examples of applications that demand the inclusion of Renold Sovereign chain. Renold Sovereign includes a particular surface treatment that ensures greatly increased wear resistance. The chain is able to withstand the effect of dust and debris infiltrating the bearing areas between pins, bushes and plates, an effect that would quickly grind away a standard specification chain.

Features and benefits:

• Resilient, durable components • Up to 3 times longer wear life than standard chain in harsh environments

• Up to 4 times longer wear life than low maintenance chain in harsh environments

• Reduced pin wear • Suitable for high speed or heavy load applications

• Excellent reliability giving reduced maintenance costs

• Ideal for situations of irregular or restricted maintenance

Renold Klik-Top™ Klik-Top™ polymer block chain is quick to install, strong, and will cut costly downtime experienced when using conventional polymer block chain.

Features and benefits:

• New synthetic clip with special profile • Protecting your goods from damage and the base chain from wear

Klik-Top™ chain ensures reliability, quality and great value for money.

• Rapidly exchangeable clip using Klip-Top™

Ideal for conveying delicate items such as glass, wood and packaging.

• Increase your productivity by reducing

You can have confidence in Klik-Top™ chain.

mechanism downtime

• 08B-1, 12B-1 and 16B-1 base chains available • Maintenance free and stainless base chains available

• Different coloured clip marks the position of a connecting link

Section 1

Solution Chains from Renold

I Renold Transmission Chain Catalogue

Renold Synergy速 Roller Chain Section 1

European (BS) Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

European (BS) Standard - Simplex GY06B1* GY08B1 111044 111046 110044 GY10B1 110054 GY12B1 GY16B1 GY20B1 GY24B1

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1

0.375 0.500 0.500 0.500 0.500 0.625 0.625 0.750 1.000 1.250 1.500

9.525 12.700 12.700 12.700 12.700 15.875 15.875 19.050 25.400 31.750 38.100

5.72 7.75 3.30 4.88 5.21 9.65 6.48 11.68 17.02 19.56 25.40

6.35 8.51 7.75 7.75 8.51 10.16 10.16 12.07 15.88 19.05 25.40

8.20 11.70 9.60 9.60 11.70 14.60 14.60 16.00 21.08 26.42 33.40

1.29 1.55 1.13 1.13 1.55 1.55 1.55 1.81 4.12 4.62 6.10

1.04 1.55 0.98 0.98 1.55 1.55 1.55 1.81 3.10 3.61 5.08

3.28 4.45 4.09 4.09 4.45 5.08 5.08 5.72 8.28 10.19 14.63

12.5 16.5 9.8 11.4 14.5 18.8 16.0 21.9 34.9 39.8 52.6

1.3 2.0 2.0 2.0 2.0 2.5 2.5 2.6 2.2 2.7 6.8

8900 17800 8900 8900 17800 22200 22200 28900 60000 95000 160000

0.39 0.70 0.30 0.35 0.70 0.96 0.81 1.22 2.80 3.85 7.45

16900 31100 44500 57800 106000 170000 280000

0.78 1.38 1.69 2.42 5.50 7.80 14.80

24900 44500 66700 86700 160000 250000 425000

1.11 2.06 2.54 3.59 8.15 11.65 22.25

European (BS) Standard - Duplex GY06B2* GY08B2 GY10B2 GY12B2 GY16B2 GY20B2 GY24B2

06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2

0.375 0.500 0.625 0.750 1.000 1.250 1.500

9.525 12.700 15.875 19.050 25.400 31.750 38.100

5.72 7.75 9.65 11.68 17.02 19.56 25.40

6.35 8.51 10.16 12.07 15.88 19.05 25.40

8.20 11.70 14.60 16.00 21.08 26.42 33.40

1.29 1.55 1.55 1.81 4.12 4.62 6.10

1.04 1.55 1.55 1.81 3.10 3.61 5.08

3.28 4.45 5.08 5.72 8.28 10.19 14.63

23.0 30.4 35.4 41.4 66.8 76.7 101.3

1.3 2.0 2.5 2.6 2.2 2.7 6.8

10.24 13.92 16.59 19.46 31.88 36.45 48.36

European (BS) Standard - Triplex GY06B3* GY08B3 GY10B3 GY12B3 GY16B3 GY20B3 GY24B3

06B-3 08B-3 10B-3 12B-3 16B-3 20B-3 24B-3

* Straight side plates

0.375 0.500 0.625 0.750 1.000 1.250 1.500

9.525 12.700 15.875 19.050 25.400 31.750 38.100

5.72 7.75 9.65 11.68 17.02 19.56 25.40

6.35 8.51 10.16 12.07 15.88 19.05 25.40

8.20 11.70 14.60 16.00 21.08 26.42 33.40

1.29 1.55 1.55 1.81 4.12 4.62 6.10

1.04 1.55 1.55 1.81 3.10 3.61 5.08

3.28 4.45 5.08 5.72 8.28 10.19 14.63

33.3 44.3 52.0 60.9 98.6 113.2 149.7

1.3 2.0 2.5 2.6 2.2 2.7 6.8

10.24 13.92 16.59 19.46 31.88 36.45 48.36

Renold Transmission Chain Catalogue

I 11

Renold Synergy® Roller Chain Section 1

ANSI Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse Extension Pitch

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

ANSI Standard - Simplex GY35A1◊ GY40A1 GY50A1 GY60A1 GY80A1 GY100A1 GY120A1 GY140A1 GY160A1

35-1 40-1 50-1 60-1 80-1 100-1 120-1 140-1 160-1

0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

4.68 7.85 9.40 12.57 15.75 18.90 25.23 25.23 31.55

5.08 7.92 10.16 11.91 15.88 19.05 22.23 25.40 28.58

8.60 11.20 14.60 17.50 24.13 30.17 36.20 42.23 48.26

1.29 1.55 2.04 2.45 3.25 4.06 4.80 5.61 6.35

3.59 3.97 5.08 5.94 7.94 9.54 11.11 12.71 14.29

12.0 16.4 20.4 25.3 32.7 39.7 49.3 52.9 63.1

1.7 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5

7900 13900 21800 31300 55600 87000 125000 170000 223000

0.35 0.60 1.00 1.47 2.80 4.20 5.70 7.80 10.40

15800 27800 43600 62600 111200 174000 250000 340000 446000

0.62 1.20 1.98 2.91 5.50 8.40 11.00 15.50 20.60

23700 41700 65400 93900 166800 261000 375000 510000 669000

0.93 1.80 2.96 4.38 8.30 12.60 16.70 23.10 31.00

ANSI Standard - Duplex GY35A2◊ GY40A2 GY50A2 GY60A2 GY80A2 GY100A2 GY120A2 GY140A2 GY160A2

35-2 40-2 50-2 60-2 80-2 100-2 120-2 140-2 160-2

0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

4.68 7.85 9.40 12.57 15.75 18.90 25.23 25.23 31.55

5.08 7.92 10.16 11.91 15.88 19.05 22.23 25.40 28.58

8.60 11.20 14.60 17.50 24.13 30.17 36.20 42.23 48.26

1.29 1.55 2.04 2.45 3.25 4.06 4.80 5.61 6.35

3.59 3.97 5.08 5.94 7.94 9.54 11.11 12.71 14.29

22.2 30.8 38.4 48.1 61.9 75.4 94.7 101.8 121.6

1.7 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5

10.13 14.38 18.11 22.78 29.29 35.76 45.44 48.87 58.55

0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

4.68 7.85 9.40 12.57 15.75 18.90 25.23 25.23 31.55

5.08 7.92 10.16 11.91 15.88 19.05 22.23 25.40 28.58

8.60 11.20 14.60 17.50 24.13 30.17 36.20 42.23 48.26

1.29 1.55 2.04 2.45 3.25 4.06 4.80 5.61 6.35

3.59 3.97 5.08 5.94 7.94 9.54 11.11 12.71 14.29

32.2 45.1 56.5 70.9 91.2 111.2 140.2 150.7 180.2

1.7 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5

10.13 14.38 18.11 22.78 29.29 35.76 45.44 48.87 58.55

ANSI Standard - Triplex GY35A3◊ GY40A3 GY50A3 GY60A3 GY80A3 GY100A3 GY120A3 GY140A3 GY160A3 ◊

Bush Chain

35-3 40-3 50-3 60-3 80-3 100-3 120-3 140-3 160-3

I Renold Transmission Chain Catalogue

Renold Syno速 Nickel Plated Section 1

European (BS) Standard / ISO 606

Chain Ref. Renold Chain No.

No.4

No. 26

No. 107

No. 12

No. 11

No. 30

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

European (BS) Standard - Simplex 06B1SN* 08B1SN 10B1SN 12B1SN 16B1SN 20B1SN 24B1SN

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1

0.375 0.500 0.625 0.750 1.000 1.250 1.500

9.525 12.700 15.875 19.050 25.400 31.750 38.100

5.72 7.75 9.65 11.68 17.02 19.56 25.40

6.35 8.51 10.16 12.07 15.88 19.05 25.40

8.20 11.70 14.60 16.00 20.20 25.30 33.40

1.29 1.81 2.04 2.42 3.76 4.46 6.08

1.04 1.55 1.55 1.81 3.06 4.16 4.88

3.28 4.45 5.08 5.72 8.27 10.17 14.63

12.5 17.0 19.6 23.6 35.0 41.4 52.6

1.1 2.0 1.4 2.5 3.0 2.1 5.1

8900 17800 22200 28900 60000 95000 160000

0.40 0.73 1.01 1.30 2.72 3.75 7.35

16900 31100 44500 57800 106000 170000 280000

0.76 1.40 1.93 2.47 5.40 7.06 14.70

European (BS) Standard - Duplex 06B2SN* 08B2SN 10B2SN 12B2SN 16B2SN 20B2SN 24B2SN

06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2

* Straight side plates

0.375 0.500 0.625 0.750 1.000 1.250 1.500

9.525 12.700 15.875 19.050 25.400 31.750 38.100

5.72 7.75 9.65 11.68 17.02 19.56 25.40

6.35 8.51 10.16 12.07 15.88 19.05 25.40

8.20 11.70 14.60 16.00 20.20 25.30 33.40

1.29 1.81 2.04 2.42 3.76 4.46 6.08

1.04 1.55 1.55 1.81 3.06 4.16 4.88

3.28 4.45 5.08 5.72 8.27 10.17 14.63

23.0 30.9 36.2 43.1 66.8 77.8 101.0

1.1 2.0 1.4 2.5 3.0 2.1 5.0

10.24 13.92 16.59 19.46 31.88 36.45 48.36

Renold Transmission Chain Catalogue

I 13

Renold Syno速 Nickel Plated Section 1

ISO 606 / ANSI Standard

Chain Ref. Renold Chain No.

No.4

No. 26

No. 107

No. 12

No. 11

No. 30

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

ANSI Standard - Simplex 40A1SN 50A1SN 60A1SN 80A1SN 100A1SN

40-1 50-1 60-1 80-1 100-1

0.500 0.625 0.750 1.000 1.250

12.700 15.875 19.050 25.400 31.750

7.85 9.40 12.57 15.75 18.90

7.92 10.16 11.91 15.88 19.05

11.70 14.60 17.50 23.00 25.30

1.76 2.42 3.23 4.06 4.46

1.55 2.04 2.45 3.06 4.16

3.97 5.08 5.95 7.92 9.53

16.9 21.1 27.0 33.7 40.6

2.0 2.5 2.5 3.1 3.5

0.500 0.625 0.750 1.000 1.250

12.700 15.875 19.050 25.400 31.750

7.85 9.40 12.57 15.75 18.90

7.92 10.16 11.91 15.88 19.05

11.70 14.60 17.50 23.00 25.30

1.76 2.42 3.23 4.06 4.46

1.55 2.04 2.45 3.06 4.16

3.97 5.08 5.95 7.92 9.53

31.3 39.2 49.8 63.0 76.4

2.0 2.5 2.5 3.1 3.5

14.38 18.11 22.78 29.29 35.76

13900 21800 31300 55600 87000

0.67 1.12 1.73 2.90 3.61

27800 43600 62600 111200 174000

1.30 2.11 3.46 5.60 6.95

ANSI Standard - Duplex 40A2SN 50A2SN 60A2SN 80A2SN 100A2SN

40-2 50-2 60-2 80-2 100-2

Syno Nickel Plated

I Renold Transmission Chain Catalogue

Renold Syno速 Polymer Bush Section 1

European (BS) Standard / ISO 606 / ANSI Standard

No. 107

No. 11/58

Chain Ref. Renold Chain No.

Technical Details (mm) ISO/ ANSI Ref.

Pitch (inch)

Pitch (mm)

Conn. Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 107

No. 11

No. 58

MIN

European (BS) Standard - Simplex

28B1SP 32B1SP 40B1SP

28B-1 32B-1 40B-1

1.75 2.00 2.25

44.45 50.80 63.50

30.99 30.99 39.30

27.94 29.21 39.37

37.08 42.29 52.96

7.62 7.11 8.13

6.35 6.35 8.13

12.71 14.29 19.85

64.2 63.4 78.2

6.8 8.0 9.5

200000 250000 355000

8.1 10.1 14.3

360000 450000 694000

15.9 17.1 27.1

125000 170000 223000 347000

5.2 6.8 8.9 14.6

250000 340000 446000 694000

10.3 13.9 17.6 28.9

European (BS) Standard - Duplex

28B2SP 32B2SP 40B2SP

28B-2 32B-2 40B-2

1.75 2.00 2.25

44.45 50.80 63.50

30.99 30.99 39.30

27.94 29.21 39.37

37.08 42.29 52.96

7.62 7.11 8.13

6.35 6.35 8.13

12.71 14.29 19.85

123.7 122.0 150.5

6.8 8.0 9.5

59.56 58.55 72.29

ANSI Standard - Simplex

120A1SP 140A1SP 160A1SP 200A1SP

120-1 140-1 160-1 200-1

1.50 1.75 2.00 2.50

38.10 44.45 50.80 63.50

25.50 25.73 31.55 38.00

22.23 25.40 28.58 39.67

36.20 42.23 48.26 60.33

4.80 5.61 6.35 8.13

11.11 12.71 14.29 19.85

49.3 52.9 63.1 76.9

5.3 5.2 6.5 9.0

1.50 1.75 2.00 2.50

38.10 44.45 50.80 63.50

25.23 25.23 31.55 37.85

22.23 25.40 28.58 39.67

36.20 42.23 48.26 60.33

4.80 5.61 6.35 8.13

11.11 12.71 14.29 19.85

94.7 101.8 121.6 148.5

5.3 5.2 6.5 9.0

45.44 48.87 58.55 71.55

ANSI Standard - Duplex

120A2SP 140A2SP 160A2SP 200A2SP

120-2 140-2 160-2 200-2

Renold Transmission Chain Catalogue

I 15

Renold Syno速 PC Section 1

European (BS) Standard / ISO 606

Chain Ref. Renold Chain No.

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

European (BS) Standard - Simplex 1215359 1215360

06B-1 08B-1

0.375 0.500

9.525 12.700

5.72 7.75

6.35 8.51

8.20 11.50

1.30 1.80

1.04 1.55

3.28 4.45

12.5 16.5

ANSI sizes available on request

Syno Polymer Bush

Syno PC

800 1600

0.22 0.38

I Renold Transmission Chain Catalogue

Renold Hydro-Service Section 1

European (BS) Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

European (BS) Standard - Simplex 06B1HS 08B1HS 10B1HS 12B1HS 16B1HS 20B1HS 24B1HS

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1

0.375 0.500 0.625 0.750 1.000 1.250 1.500

9.525 12.700 15.880 19.050 25.400 31.750 38.100

5.72 7.75 9.65 11.68 17.02 19.56 25.40

6.35 8.51 10.16 12.07 15.88 19.05 25.40

8.26 11.81 14.73 16.13 21.08 26.42 33.40

1.30 1.55 1.55 1.80 4.12 4.62 6.10

1.04 1.55 1.55 1.80 3.10 3.61 5.08

3.28 4.45 5.08 5.72 8.28 10.19 14.63

13.5 17.0 18.8 21.9 36.1 43.2 53.4

3.3 3.9 1.3 1.1 5.4 6.1 6.6

8900 17800 22200 28900 60000 95000 160000

0.39 0.70 0.92 1.20 2.80 3.85 7.45

16900 31100 44500 57800 106000 170000 280000

0.74 1.38 1.80 2.40 5.50 7.80 14.80

European (BS) Standard - Duplex 06B2HS 08B2HS 10B2HS 12B2HS 16B2HS 20B2HS 24B2HS

06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2

0.375 0.500 0.625 0.750 1.000 1.250 1.500

9.525 12.700 15.875 19.050 25.400 31.750 38.100

5.72 7.75 9.65 11.68 17.02 19.56 25.40

6.35 8.51 10.16 12.07 15.88 19.05 25.40

8.26 11.81 14.73 16.13 21.08 26.42 33.40

1.30 1.55 1.55 1.80 4.12 4.62 6.10

1.04 1.55 1.55 1.80 3.10 3.61 5.08

3.28 4.45 5.08 5.72 8.28 10.19 14.63

23.0 30.4 35.4 41.4 68.0 76.7 101.3

1.3 1.5 1.3 1.1 5.4 2.7 6.8

10.24 13.92 16.59 19.46 31.88 36.45 48.36

Renold Transmission Chain Catalogue

I 17

Renold Hydro-Service Section 1

ANSI Standard

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

ANSI Standard - Simplex 25A1HS 35A1HS 40A1HS 50A1HS 60A1HS 80A1HS 100A1HS 120A1HS

25-1 35-1 40-1 50-1 60-1 80-1 100-1 120-1

0.250 0.375 0.500 0.625 0.750 1.000 1.250 1.500

6.350 9.525 12.700 15.875 19.050 25.400 31.750 38.100

3.10 4.68 7.85 9.40 12.57 15.75 18.90 25.23

3.30 5.08 7.92 10.16 11.91 15.88 19.05 22.23

6.02 9.05 12.07 15.09 18.10 24.13 30.17 36.20

0.76 1.30 1.55 2.03 2.39 3.25 4.06 4.80

2.30 3.59 3.98 5.09 5.96 7.94 9.54 11.11

8.6 12.0 16.4 20.4 25.3 32.7 39.7 49.3

0.8 1.1 1.4 1.1 1.1 3.0 4.2 5.3

3500 7900 13900 21800 31300 55600 87000 125000

0.13 0.33 0.60 1.00 1.47 2.80 4.20 5.70

7000 15800 27800 43600 62600 111200 174000 250000

0.26 0.65 1.20 2.10 3.05 5.50 8.40 11.00

ANSI Standard - Duplex 25A2HS 35A2HS 40A2HS 50A2HS 60A2HS 80A2HS 100A2HS 120A2HS

25-2 35-2 40-2 50-2 60-2 80-2 100-2 120-2

0.250 0.375 0.500 0.625 0.750 1.000 1.250 1.500

6.350 9.525 12.700 15.875 19.050 25.400 31.750 38.100

3.10 4.68 7.85 9.40 12.57 15.75 18.90 25.23

3.30 5.08 7.92 10.16 11.91 15.88 19.05 22.23

6.02 9.05 12.07 15.09 18.10 24.13 30.17 36.20

0.76 1.30 1.55 2.03 2.39 3.25 4.06 4.80

2.30 3.59 3.98 5.09 5.96 7.94 9.54 11.11

15.5 22.2 30.8 38.4 48.1 61.9 75.4 94.7

0.8 1.1 1.4 1.1 1.1 3.0 4.2 5.3

6.40 10.13 14.38 18.11 22.78 29.29 35.76 45.44

I Renold Transmission Chain Catalogue

Renold Sovereign Section 1

European (BS) Standard / ISO 606 / ANSI Standard

Chain Ref. Renold Chain No.

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

European (BS) Standard - Simplex 08B1SO 10B1SO 12B1SO 16B1SO

08B-1 10B-1 12B-1 16B-1

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

7.75 9.65 11.68 17.02

8.51 10.16 12.07 15.88

11.70 14.60 16.00 21.08

1.55 1.55 1.81 4.12

1.55 1.55 1.81 3.10

4.45 5.08 5.72 8.28

16.5 18.8 21.9 34.9

2.0 2.5 2.6 2.2

17800 22200 28900 60000

0.70 0.96 1.22 2.80

31100 44500 57800 106000

1.38 1.69 2.42 5.50

European (BS) Standard - Duplex 08B2SO 10B2SO 12B2SO 16B2SO

08B-2 10B-2 12B-2 16B-2

Chain Ref. Renold Chain No.

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

7.75 9.65 11.68 17.02

8.51 10.16 12.07 15.88

11.70 14.60 16.00 21.08

1.55 1.55 1.81 4.12

1.55 1.55 1.81 3.10

4.45 5.08 5.72 8.28

30.4 35.4 41.4 66.8

2.0 2.5 2.6 2.2

13.92 16.59 19.46 31.88

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse Extension Pitch

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

ANSI Standard - Simplex 40A1SO 50A1SO 60A1SO 80A1SO

40-1 50-1 60-1 80-1

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

7.85 9.40 12.57 15.75

7.92 10.16 11.91 15.88

11.20 14.60 17.50 24.13

1.55 2.04 2.45 3.25

3.97 5.08 5.94 7.94

16.4 20.4 25.3 32.7

2.1 2.7 2.6 3.0

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

7.85 9.40 12.57 15.75

7.92 10.16 11.91 15.88

11.20 14.60 17.50 24.13

1.55 2.04 2.45 3.25

3.97 5.08 5.94 7.94

30.8 38.4 48.1 61.9

2.1 2.7 2.6 3.0

14.38 18.11 22.78 29.29

13900 21800 31300 55600

0.60 1.00 1.47 2.80

27800 43600 62600 111200

1.20 1.98 2.91 5.50

ANSI Standard - Duplex 40A2SO 50A2SO 60A2SO 80A2SO

40-2 50-2 60-2 80-2

Renold Transmission Chain Catalogue

I 19

Renold Stainless Steel Chain Section 1

European (BS) Standard / ISO 606 / ANSI Standard

Chain Ref. Renold Chain No.

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Technical Details (mm) ISO/ ANSI Ref.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

European (BS) Standard - Simplex 05B1SS 06B1SS 08B1SS 10B1SS 12B1SS 16B1SS

05B-1 06B-1 08B-1 10B-1 12B-1 16B-1

0.315 0.375 0.500 0.625 0.750 1.000

8.000 9.525 12.700 15.875 19.050 25.400

3.00 5.72 7.75 9.65 11.68 17.02

5.00 6.35 8.51 10.16 12.07 15.88

7.11 8.20 11.70 14.60 16.00 20.20

0.76 1.29 1.55 1.55 1.81 3.70

0.76 1.04 1.55 1.55 1.81 3.00

2.31 3.28 4.45 5.08 5.72 8.28

8.6 12.5 16.5 18.8 21.9 34.9

1.5 1.3 2.0 2.5 2.6 2.2

3200 6850 12000 14700 18640 43160

0.18 0.39 0.70 0.96 1.22 2.70

12150 23540 29400 37280 86320

0.78 1.38 1.69 2.42 5.40

2500 7600 10690 16810 30000 51000

0.12 0.35 0.60 1.00 1.47 2.60

15200 21380 33620 60000 101000

0.62 1.20 1.98 2.91 5.01

European (BS) Standard - Duplex 06B2SS 08B2SS 10B2SS 12B2SS 16B2SS

06B-2 08B-2 10B-2 12B-2 16B-2

0.375 0.500 0.625 0.750 1.000

9.525 12.700 15.875 19.050 25.400

5.72 7.75 9.65 11.68 17.02

6.35 8.51 10.16 12.07 15.88

8.20 11.70 14.60 16.00 21.08

1.29 1.55 1.55 1.81 3.70

1.04 1.55 1.55 1.81 3.00

3.28 4.45 5.08 5.72 8.28

23.0 30.4 35.4 41.4 66.8

1.3 2.0 2.5 2.6 2.2

10.24 13.92 16.59 19.46 31.88

0.250 0.375 0.500 0.625 0.750 1.000

6.350 9.525 12.700 15.875 19.050 25.400

3.10 4.68 7.85 9.40 12.57 15.75

3.30 5.08 7.92 10.16 11.91 15.88

5.90 8.60 11.20 14.60 17.50 23.00

0.76 1.29 1.55 2.04 2.45 3.00

2.30 3.59 3.97 5.08 5.94 7.94

7.9 12.0 16.4 20.4 25.3 32.7

1.2 1.7 2.1 2.7 2.6 3.0

0.375 0.500 0.625 0.750 1.000

9.525 12.700 15.875 19.050 25.400

4.68 7.85 9.40 12.57 15.75

5.08 7.92 10.16 11.91 15.88

8.60 11.20 14.60 17.50 24.13

1.29 1.55 2.04 2.45 3.00

3.59 3.97 5.08 5.94 7.93

22.2 30.8 38.4 48.1 62.7

1.7 2.1 2.7 2.6 5.4

10.13 14.38 18.11 22.78 29.29

ANSI Standard - Simplex 25A1SS 35A1SS 40A1SS 50A1SS 60A1SS 80A1SS

25-1 35-1 40-1 50-1 60-1 80-1

ANSI Standard - Duplex 35A2SS 40A2SS 50A2SS 60A2SS 80A2SS

35-2 40-2 50-2 60-2 80-2

I Renold Transmission Chain Catalogue

Zinc Plated Chain Section 1

European (BS) Standard / ISO 606 / ANSI Standard

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse Extension Pitch

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

European (BS) Standard - Simplex 581015 581803 583109 583620 584319 585187 585466

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1

0.375 0.500 0.625 0.750 1.000 1.250 1.500

9.525 12.700 15.875 19.050 25.400 31.750 38.100

5.72 7.75 9.65 11.68 17.02 19.56 25.40

6.35 8.51 10.16 12.07 15.88 19.05 25.40

8.20 11.70 14.60 16.00 21.08 26.42 33.40

1.29 1.55 1.55 1.81 4.12 4.62 6.10

1.04 1.55 1.55 1.81 3.10 3.61 5.08

3.28 4.45 5.08 5.72 8.28 10.19 14.63

12.5 16.5 18.8 21.9 34.9 39.8 52.6

1.3 2.0 2.5 2.6 2.2 2.7 6.8

ANSI sizes available on request

Stainless Steel Chain

Zinc Plated Chain

7565 15130 18870 24565 51000 80750 136000

0.39 0.70 0.96 1.22 2.80 3.85 7.45

Renold Transmission Chain Catalogue

I 21

Nickel Plated Chain Section 1

European (BS) Standard / ISO 606 / ANSI Standard

Chain Ref. Renold Chain No.

Technical Details (mm) ISO/ ANSI Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse Extension Pitch

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

European (BS) Standard - Simplex 550038 550046 550056 550066 550088 550127 550147 550166

06B-1 08B-1 10B-1 12B-1 16B-1 24B-1 28B-1 32B-1

0.375 0.500 0.625 0.750 1.000 1.500 1.750 2.000

9.525 12.700 15.875 19.050 25.400 38.100 44.450 50.800

5.72 7.75 9.65 11.68 17.02 25.40 30.99 30.99

6.35 8.51 10.16 12.07 15.88 25.40 27.94 29.21

8.20 11.70 14.60 16.00 21.08 33.40 37.08 42.29

1.29 1.55 1.55 1.81 4.12 6.10 7.62 7.11

1.04 1.55 1.55 1.81 3.10 5.08 6.35 6.35

3.28 4.45 5.08 5.72 8.28 14.63 15.90 17.81

12.5 16.5 18.8 21.9 34.9 52.6 64.2 63.4

1.3 2.0 2.5 2.6 2.2 6.8 6.8 8.0

0.500 0.625 0.750 1.000 1.250

12.700 15.875 19.050 25.400 31.750

7.85 9.40 12.57 15.75 18.90

7.92 10.16 11.91 15.88 19.05

11.20 14.60 17.50 24.13 30.17

1.55 2.04 2.45 3.25 4.06

3.97 5.08 5.94 7.94 9.54

16.4 20.4 25.3 32.7 39.7

2.1 2.7 2.6 3.0 4.2

7565 15130 18870 24565 51000 136000 170000 212500

0.39 0.70 0.96 1.22 2.80 7.45 9.35 10.10

11815 18530 26605 47260 73950

0.60 1.00 1.47 2.80 4.20

ANSI Standard - Simplex 559043 559053 559063 559083 559103

40-1 50-1 60-1 80-1 100-1

Nickel Plated Chain

I Renold Transmission Chain Catalogue

Renold Roller Chain Section 1

European (BS) Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse ISO606 Extension Pitch Tensile Strength (Newtons) MAX

NOM

Weight

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

No. 69

No. 87

No. 211

kg/m

MIN

European (BS) Standard - Simplex 1141 1151 1161 05B1 06B1* 08B1 111043 111041 110043 10B1 110053 12B1 16B1 20B1 24B1 28B1 32B1 40B1 180709 180781 110325

03 04 05B-1 06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1 28B-1 32B-1 40B-1 -

* Straight side plates

0.157 0.197 0.236 0.315 0.375 0.500 0.500 0.500 0.500 0.625 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.500 3.000 3.500 4.000

4.000 5.000 6.000 8.000 9.525 12.700 12.700 12.700 12.700 15.875 15.875 19.050 25.400 31.750 38.100 44.450 50.800 63.500 76.200 88.900 101.600

2.70 2.50 2.80 3.00 5.72 7.75 4.88 3.30 5.21 9.65 6.48 11.68 17.02 19.56 25.40 30.99 30.99 39.30 45.72 53.34 60.96

2.50 3.20 4.00 5.00 6.35 8.51 7.75 7.75 8.51 10.16 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37 48.26 53.98 63.50

4.10 4.10 5.00 7.11 8.20 11.70 9.60 9.60 11.70 14.60 14.60 16.00 21.08 26.42 33.40 37.08 42.29 52.96 66.04 80.52 90.17

0.57 0.60 0.60 0.76 1.29 1.55 1.13 1.13 1.55 1.55 1.55 1.81 4.12 4.62 6.10 7.62 7.11 8.13 12.19 13.72 15.24

0.57 0.60 0.60 0.76 1.04 1.55 0.98 0.98 1.55 1.55 1.55 1.81 3.10 3.61 5.08 6.35 6.35 8.13 10.16 12.70 13.72

1.65 1.49 1.85 2.31 3.28 4.45 4.09 4.09 4.45 5.08 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89 29.24 34.30 39.40

6.8 7.4 7.4 8.6 12.5 16.5 11.4 9.8 14.5 18.8 16.0 21.9 34.9 39.8 52.6 64.2 63.4 78.2 99.1 114.6 130.9

1.2 1.3 1.0 1.5 1.3 2.0 2.0 2.0 2.0 2.5 2.5 2.6 2.2 2.7 6.8 6.8 8.0 9.5 10.5 11.7 13.0

1800 2200 3000 4400 8900 17800 8900 8900 17800 22200 22200 28900 60000 95000 160000 200000 250000 355000 560000 778435 711800

0.07 0.08 0.12 0.18 0.39 0.70 0.35 0.30 0.70 0.96 0.81 1.22 2.80 3.85 7.45 9.35 10.10 16.50 25.80 35.20 49.30

Renold Transmission Chain Catalogue

I 23

Renold Roller Chain Section 1

European (BS) Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse ISO606 Extension Pitch Tensile Strength (Newtons) MAX

NOM

Weight

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

No. 69

No. 87

No. 211

kg/m

MIN

European (BS) Standard - Duplex 05B2 06B2* 08B2 10B2 12B2 16B2 20B2 24B2 28B2 32B2 40B2 180721 180760 114325

05B-2 06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2 28B-2 32B-2 40B-2 -

0.315 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.500 3.000 3.500 4.000

8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 63.500 76.200 88.900 101.600

3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99 39.30 45.72 53.34 60.96

5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37 48.26 53.98 63.50

7.11 8.20 11.70 14.60 16.00 21.08 26.42 33.40 37.08 42.29 52.96 66.04 80.52 90.17

0.76 1.29 1.55 1.55 1.81 4.12 4.62 6.10 7.62 7.11 8.13 12.19 12.45 15.24

0.76 1.04 1.55 1.55 1.81 3.10 3.61 5.08 6.35 6.35 8.13 10.16 13.72 13.72

2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89 29.24 34.30 39.40

14.3 23.0 30.4 35.4 41.4 66.8 76.7 101.3 123.7 122.0 150.5 190.4 221.2 250.8

1.5 1.3 2.0 2.5 2.6 2.2 2.7 6.8 6.8 8.0 9.5 10.5 11.7 13.0

5.64 10.24 13.92 16.59 19.46 31.88 36.45 48.36 59.56 58.55 72.29 91.21 106.60 119.90

7800 16900 31100 44500 57800 106000 170000 280000 360000 450000 630000 1000000 1557000 1423420

0.36 0.78 1.38 1.69 2.42 5.50 7.80 14.80 18.60 20.10 32.80 51.00 69.70 97.50

11100 24900 44500 66700 86700 160000 250000 425000 530000 670000 950000 1500000

0.54 1.11 2.06 2.54 3.59 8.15 11.65 22.25 28.00 30.00 48.90 76.20

European (BS) Standard - Triplex 05B3 06B3* 08B3 10B3 12B3 16B3 20B3 24B3 28B3 32B3 40B3 180739

05B-3 06B-3 08B-3 10B-3 12B-3 16B-3 20B-3 24B-3 28B-3 32B-3 40B-3 -

* Straight side plates

0.315 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.500 3.000

8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 63.500 76.200

3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99 39.30 45.72

5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37 48.26

7.11 8.20 11.70 14.60 16.00 21.08 26.42 33.40 37.08 42.29 52.96 66.04

0.76 1.29 1.55 1.55 1.81 4.12 4.62 6.10 7.62 7.11 8.13 12.19

0.76 1.04 1.55 1.55 1.81 3.10 3.61 5.08 6.35 6.35 8.13 10.16

2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89 29.24

19.9 33.3 44.3 52.0 60.9 98.6 113.2 149.7 183.3 180.5 222.8 281.6

1.5 1.3 2.0 2.5 2.6 2.2 2.7 6.8 6.8 8.0 9.5 10.5

5.64 10.24 13.92 16.59 19.46 31.88 36.45 48.36 59.56 58.55 72.29 91.21

I Renold Transmission Chain Catalogue

Renold Roller Chain Section 1

ANSI Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Transverse Extension Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

ANSI Standard - Simplex 25A1◊ 35A1◊ 40A1 41A1 50A1 60A1 80A1 100A1 120A1 140A1 160A1 180A1 200A1 240A1 ◊

Bush Chain

25-1 35-1 40-1 41-1 50-1 60-1 80-1 100-1 120-1 140-1 160-1 180-1 200-1 240-1

0.250 0.375 0.500 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 3.000

6.350 9.525 12.700 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 57.150 63.500 76.200

3.10 4.68 7.85 6.35 9.40 12.57 15.75 18.90 25.23 25.23 31.55 35.48 37.85 47.35

3.30 5.08 7.92 7.77 10.16 11.91 15.88 19.05 22.23 25.40 28.58 35.71 39.67 47.62

5.90 8.60 11.20 9.91 14.60 17.50 24.13 30.17 36.20 42.23 48.26 54.30 60.33 72.39

0.76 1.29 1.55 1.30 2.04 2.45 3.25 4.06 4.80 5.61 6.35 7.11 8.13 9.80

2.30 3.59 3.97 3.59 5.08 5.94 7.94 9.54 11.11 12.71 14.29 17.46 19.85 23.80

7.9 12.0 16.4 14.5 20.4 25.3 32.7 39.7 49.3 52.9 63.1 70.6 76.9 94.4

1.2 1.7 2.1 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5 7.9 9.0 10.5

3500 7900 13900 6700 21800 31300 55600 87000 125000 170000 223000 281000 347000 500000

0.12 0.35 0.60 0.42 1.00 1.47 2.80 4.20 5.70 7.80 10.40 13.94 17.30 25.00

Renold Transmission Chain Catalogue

I 25

Renold Roller Chain Section 1

ANSI Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Transverse Extension Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

ANSI Standard - Duplex 25A2◊ 35A2◊ 40A2 50A2 60A2 80A2 100A2 120A2 140A2 160A2 180A2 200A2 240A2

25-2 35-2 40-2 50-2 60-2 80-2 100-2 120-2 140-2 160-2 180-2 200-2 240-2

0.250 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 3.000

6.350 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 57.150 63.500 76.200

3.10 4.68 7.85 9.40 12.57 15.75 18.90 25.23 25.23 31.55 35.48 37.85 47.35

3.30 5.08 7.92 10.16 11.91 15.88 19.05 22.23 25.40 28.58 35.71 39.67 47.62

5.90 8.60 11.20 14.60 17.50 24.13 30.17 36.20 42.23 48.26 54.30 60.33 72.39

0.76 1.29 1.55 2.04 2.45 3.25 4.06 4.80 5.61 6.35 7.11 8.13 9.80

2.30 3.59 3.97 5.08 5.94 7.94 9.54 11.11 12.71 14.29 17.46 19.85 23.80

14.2 22.2 30.8 38.4 48.1 61.9 75.4 94.7 101.8 121.6 136.5 148.5 182.2

1.2 1.7 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5 7.9 9.0 10.5

6.40 10.13 14.38 18.11 22.78 29.29 35.76 45.44 48.87 58.55 65.84 71.55 87.80

0.250 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.250 2.500 3.000

6.350 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 57.150 63.500 76.200

3.10 4.68 7.85 9.40 12.57 15.75 18.90 25.23 25.23 31.55 35.48 37.85 47.35

3.30 5.08 7.92 10.16 11.91 15.88 19.05 22.23 25.40 28.58 35.71 39.67 47.62

5.90 8.60 11.20 14.60 17.50 24.13 30.17 36.20 42.23 48.26 54.30 60.33 72.39

0.76 1.29 1.55 2.04 2.45 3.25 4.06 4.80 5.61 6.35 7.11 8.13 9.80

2.30 3.59 3.97 5.08 5.94 7.94 9.54 11.11 12.71 14.29 17.46 19.85 23.80

20.8 32.2 45.1 56.5 70.9 91.2 111.2 140.2 150.7 180.2 202.3 229.0 270.1

1.2 1.7 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5 7.9 9.0 10.5

6.40 10.13 14.38 18.11 22.78 29.29 35.76 45.44 48.87 58.55 65.84 71.55 87.80

7000 15800 27800 43600 62600 111200 174000 250000 340000 446000 562000 694000 1000000

0.26 0.62 1.20 1.98 2.91 5.50 8.40 11.00 15.50 20.60 27.72 34.40 50.00

10500 23700 41700 65400 93900 166800 261000 375000 510000 669000 843000 1041000 1500000

0.39 0.93 1.80 2.96 4.38 8.30 12.60 16.70 23.10 31.00 41.50 51.20 75.00

ANSI Standard - Triplex 25A3◊ 35A3◊ 40A3 50A3 60A3 80A3 100A3 120A3 140A3 160A3 180A3 200A3 240A3 ◊

Bush Chain

25-3 35-3 40-3 50-3 60-3 80-3 100-3 120-3 140-3 160-3 180-3 200-3 240-3

I Renold Transmission Chain Catalogue

Renold A&S Roller Chain Section 1

European (BS) Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

European (BS) Standard - Simplex 1000001 1000002 1000003 AR05B1 AR06B1* AR08B1** AR10B1** AR12B1** AR16B1** AR20B1** AR24B1** AR28B1 AR32B1 AR40B1

03 04 05B-1 06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1 28B-1 32B-1 40B-1

0.158 0.197 0.236 0.315 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.500

4.000 5.000 6.000 8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 63.500

2.70 2.50 2.80 3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99 39.30

2.50 3.20 4.00 5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37

4.10 4.10 5.00 7.11 8.20 11.70 14.60 16.00 21.08 26.42 33.40 37.08 42.29 52.96

0.57 0.60 0.60 0.76 1.29 1.55 1.55 1.81 4.12 4.62 6.10 7.62 7.11 8.13

0.57 0.60 0.60 0.76 1.04 1.55 1.55 1.81 3.10 3.61 5.08 6.35 6.35 8.13

1.65 1.49 1.85 2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89

6.8 7.4 7.4 8.6 12.5 16.5 18.8 21.9 34.9 39.8 52.6 64.2 63.4 78.2

1.2 1.3 1.0 1.5 1.3 2.0 2.5 2.6 2.2 2.7 6.8 6.8 8.0 9.5

1800 2200 3000 4400 8900 17800 22200 28900 60000 95000 160000 200000 250000 355000

0.07 0.08 0.12 0.18 0.39 0.70 0.96 1.22 2.80 3.85 7.45 9.35 10.10 16.50

6000 7800 16900 31100 44500 57800 106000 170000 280000 360000 450000 630000

0.24 0.36 0.78 1.38 1.69 2.42 5.50 7.80 14.80 18.60 20.10 32.80

11100 24900 44500 66700 86700 160000 250000 425000 530000 670000 950000

0.54 1.11 2.06 2.54 3.59 8.15 11.65 22.25 28.00 30.00 48.90

European (BS) Standard - Duplex 1000004 AR05B2 AR06B2* AR08B2** AR10B2** AR12B2** AR16B2** AR20B2 AR24B2 AR28B2 AR32B2 AR40B2

04 05B-2 06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2 28B-2 32B-2 40B-2

0.236 0.315 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.500

6.000 8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 63.500

2.80 3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99 39.30

4.00 5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37

5.00 7.11 8.20 11.70 14.60 16.00 21.08 26.42 33.40 37.08 42.29 52.96

0.60 0.76 1.29 1.55 1.55 1.81 4.12 4.62 6.10 7.62 7.11 8.13

0.60 0.76 1.04 1.55 1.55 1.81 3.10 3.61 5.08 6.35 6.35 8.13

1.85 2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89

7.4 14.3 23.0 30.4 35.4 41.4 66.8 76.7 101.3 123.7 122.0 150.5

1.0 1.5 1.3 2.0 2.5 2.6 2.2 2.7 6.8 6.8 8.0 9.5

5.50 5.64 10.24 13.92 16.59 19.46 31.88 36.45 48.36 59.56 58.55 72.29

European (BS) Standard - Triplex AR05B3 AR06B3* AR08B3 AR10B3 AR12B3 AR16B3 AR20B3 AR24B3 AR28B3 AR32B3 AR40B3

05B-3 06B-3 08B-3 10B-3 12B-3 16B-3 20B-3 24B-3 28B-3 32B-3 40B-3

0.315 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.500

8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 63.500

3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99 39.30

5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37

7.11 8.20 11.70 14.60 16.00 21.08 26.42 33.40 37.08 42.29 52.96

0.76 1.29 1.55 1.55 1.81 4.12 4.62 6.10 7.62 7.11 8.13

0.76 1.04 1.55 1.55 1.81 3.10 3.61 5.08 6.35 6.35 8.13

2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89

19.9 33.3 44.3 52.0 60.9 98.6 113.2 149.7 183.3 180.5 222.8

1.5 1.3 2.0 2.5 2.6 2.2 2.7 6.8 6.8 8.0 9.5

5.64 10.24 13.92 16.59 19.46 31.88 36.45 48.36 59.56 58.55 72.29

* Only with straight plates ** Straight side plates available

Renold Transmission Chain Catalogue

I 27

Renold A&S Roller Chain Section 1

ANSI Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse Extension Pitch

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

ANSI Standard - Simplex AR25A1◊ AR35A1◊ AR40A1 AR50A1** AR60A1** AR80A1 AR100A1 AR120A1 AR140A1 AR160A1 AR200A1

25-1 35-1 40-1 50-1 60-1 80-1 100-1 120-1 140-1 160-1 200-1

0.250 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000 2.500

6.350 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800 63.500

3.10 4.68 7.85 9.40 12.57 15.75 18.90 25.23 25.23 31.55 37.85

3.30 5.08 7.92 10.16 11.91 15.88 19.05 22.23 25.40 28.58 39.67

5.90 8.60 11.20 14.60 17.50 24.13 30.17 36.20 42.23 48.26 60.33

0.76 1.29 1.55 2.04 2.45 3.25 4.06 4.80 5.61 6.35 8.13

2.30 3.59 3.97 5.08 5.94 7.94 9.54 11.11 12.71 14.29 19.85

7.9 12.0 16.4 20.4 25.3 32.7 39.7 49.3 52.9 63.1 76.9

1.2 1.7 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5 9.0

3500 7900 13900 21800 31300 55600 87000 125000 170000 223000 347000

0.12 0.35 0.60 1.00 1.47 2.80 4.20 5.70 7.80 10.40 17.30

7000 15800 27800 43600 62600 111200 174000 250000 340000 446000

0.26 0.62 1.20 1.98 2.91 5.50 8.40 11.00 15.50 20.60

10500 23700 41700 65400 93900 166800 261000 375000 510000 669000

0.39 0.93 1.80 2.96 4.38 8.30 12.60 16.70 23.10 31.00

ANSI Standard - Duplex AR25A2◊ AR35A2◊ AR40A2 AR50A2 AR60A2 AR80A2 AR100A2 AR120A2 AR140A2 AR160A2

25-2 35-2 40-2 50-2 60-2 80-2 100-2 120-2 140-2 160-2

0.250 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

6.350 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

3.10 4.68 7.85 9.40 12.57 15.75 18.90 25.23 25.23 31.55

3.30 5.08 7.92 10.16 11.91 15.88 19.05 22.23 25.40 28.58

5.90 8.60 11.20 14.60 17.50 24.13 30.17 36.20 42.23 48.26

0.76 1.29 1.55 2.04 2.45 3.25 4.06 4.80 5.61 6.35

2.30 3.59 3.97 5.08 5.94 7.94 9.54 11.11 12.71 14.29

14.2 22.2 30.8 38.4 48.1 61.9 75.4 94.7 101.8 121.6

1.2 1.7 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5

6.40 10.13 14.38 18.11 22.78 29.29 35.76 45.44 48.87 58.55

ANSI Standard - Triplex AR25A3◊ AR35A3◊ AR40A3 AR50A3 AR60A3 AR80A3 AR100A3 AR120A3 AR140A3 AR160A3 ◊

25-3 35-3 40-3 50-3 60-3 80-3 100-3 120-3 140-3 160-3

0.250 0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

6.350 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

3.10 4.68 7.85 9.40 12.57 15.75 18.90 25.23 25.23 31.55

3.30 5.08 7.92 10.16 11.91 15.88 19.05 22.23 25.40 28.58

5.90 8.60 11.20 14.60 17.50 24.13 30.17 36.20 42.23 48.26

0.76 1.29 1.55 2.04 2.45 3.25 4.06 4.80 5.61 6.35

2.30 3.59 3.97 5.08 5.94 7.94 9.54 11.11 12.71 14.29

20.8 32.2 45.1 56.5 70.9 91.2 111.2 140.2 150.7 180.2

1.2 1.7 2.1 2.7 2.6 3.0 4.2 5.3 5.2 6.5

6.40 10.13 14.38 18.11 22.78 29.29 35.76 45.44 48.87 58.55

Bush Chain ** Straight side plates available

I Renold Transmission Chain Catalogue

Renold SD Roller Chain Abschnitt 1

European (BS) Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 12

No. 30

MIN

European (BS) Standard - Simplex SD05B-1 SD06B-1* SD08B-1 SD10B-1 SD12B-1 SD16B-1 SD20B-1 SD24B-1 SD28B-1 SD32B-1

05B-1 06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1 28B-1 32B-1

0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99

5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21

7.11 8.20 11.80 14.70 16.10 21.05 26.30 33.30 36.90 42.10

0.75 1.25 1.50 1.65 1.80 4.00 4.50 6.00 7.40 7.10

0.75 1.00 1.50 1.65 1.80 3.20 3.50 5.20 6.40 6.40

2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81

8.0 13.2 16.7 19.6 22.5 36.0 41.1 53.3 64.8 66.2

8.9 14.2 18.0 21.0 24.0 37.2 44.7 57.5 69.5 71.0

4400 8900 17800 22200 28900 60000 95000 160000 200000 250000

0.20 0.41 0.69 0.96 1.22 2.80 3.85 7.45 9.35 10.10

16900 31100 44500 57800 106000 170000 280000 360000 450000

0.77 1.34 1.84 2.31 5.42 7.20 13.40 16.60 21.00

24900 44500 66700 86700 160000 250000 425000 530000 670000

1.16 2.03 2.77 3.46 8.13 10.82 20.10 24.92 31.56

European (BS) Standard - Duplex SD06B-2* SD08B-2 SD10B-2 SD12B-2 SD16B-2 SD20B-2 SD24B-2 SD28B-2 SD32B-2

06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2 28B-2 32B-2

0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99

6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21

8.20 11.80 14.70 16.10 21.05 26.30 33.30 36.90 42.10

1.25 1.50 1.65 1.80 4.00 4.50 6.00 7.40 7.10

1.00 1.50 1.65 1.80 3.20 3.50 5.20 6.40 6.40

3.28 4.45 5.08 5.72 8.2 10.19 14.63 15.90 17.81

23.5 31.0 36.2 42.1 67.5 77.2 101.6 124.1 124.6

24.5 32.1 37.5 43.6 69.1 80.9 105.9 129.1 129.6

10.24 13.92 16.59 19.46 31.88 36.45 48.36 59.56 58.55

European (BS) Standard - Triplex SD06B-3* SD08B-3 SD10B-3 SD12B-3 SD16B-3 SD20B-3 SD24B-3 SD28B-3 SD32B-3

06B-3 08B-3 10B-3 12B-3 16B-3 20B-3 24B-3 28B-3 32B-3

* Only with straight plates

0.375 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

9.525 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99

6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21

8.20 11.80 14.70 16.10 21.05 26.30 33.30 36.90 42.10

1.25 1.50 1.65 1.80 4.00 4.50 6.00 7.40 7.10

1.04 1.50 1.65 1.80 3.20 3.50 5.20 6.40 6.40

3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81

33.80 44.90 52.80 61.65 99.40 114.20 105.10 184.20 183.20

33.90 46.05 54.10 63.20 101.00 117.90 154.60 188.70 188.20

10.24 13.92 16.59 19.46 31.88 36.45 48.36 59.56 58.55

Renold Transmission Chain Catalogue

I 29

Renold SD Roller Chain Section 1

ANSI Standard / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse Extension Pitch

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

ANSI Standard - Simplex SD25-1◊ SD35-1◊ SD41-1 SD40-1 SD50-1 SD60-1 SD80-1 SD100-1 SD120-1 SD140-1 SD160-1

25-1 35-1 41-1 40-1 50-1 60-1 80-1 100-1 120-1 140-1 160-1

0.250 0.375 0.500 0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

6.350 9.525 12.700 12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

3.18 4.77 6.25 7.85 9.40 12.57 15.75 18.90 25.22 25.22 31.55

3.30 5.08 7.77 7.95 10.16 11.91 15.88 19.05 22.23 25.40 28.58

5.90 8.95 9.90 11.90 15.09 18.00 24.10 30.10 36.10 42.00 48.00

0.75 1.20 1.20 1.50 2.00 2.40 3.10 3.90 4.70 5.60 6.40

2.31 3.58 3.58 3.96 5.08 5.94 7.92 9.53 11.10 12.70 14.20

7.80 12.15 13.75 16.60 20.90 25.90 32.80 40.00 50.45 54.20 64.30

8.45 13.10 15.40 17.75 22.20 27.50 34.90 43.20 53.40 59.00 69.90

3500 7900 6700 13900 21800 31300 55600 87000 125000 170000 223000

0.15 0.33 0.41 0.62 1.02 1.50 2.60 3.91 5.62 7.50 10.10

27800 43600 62600 111200 174000 250000 340000 446000

1.12 2.00 2.92 5.15 7.80 11.70 15.14 20.14

41700 65400 93900 166800 261000 375000 510000 669000

1.90 3.09 4.54 7.89 11.77 17.53 22.20 30.02

ANSI Standard - Duplex SD40-2 SD50-2 SD60-2 SD80-2 SD100-2 SD120-2 SD140-2 SD160-2

40-2 50-2 60-2 80-2 100-2 120-2 140-2 160-2

0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

7.85 9.40 12.57 15.75 18.90 25.22 25.22 31.55

7.95 10.16 11.91 15.88 19.05 22.23 25.40 28.58

11.90 15.09 18.00 24.10 30.10 36.10 42.00 48.00

1.50 2.00 2.40 3.10 3.90 4.70 5.60 6.40

3.96 5.08 5.94 7.92 9.53 11.10 12.70 14.27

31.1 39.0 48.8 61.9 76.2 95.4 103.1 122.9

32.25 40.30 50.30 64.20 80.50 99.70 107.90 128.10

14.38 18.11 22.78 29.29 35.76 45.44 48.87 58.55

ANSI Standard - Triplex SD40-3 SD50-3 SD60-3 SD80-3 SD100-3 SD120-3 SD140-3 SD160-3 ◊

Bush Chain

40-3 50-3 60-3 80-3 100-3 120-3 140-3 160-3

0.500 0.625 0.750 1.000 1.250 1.500 1.750 2.000

12.700 15.875 19.050 25.400 31.750 38.100 44.450 50.800

7.85 9.40 12.57 15.75 18.90 25.22 25.22 31.55

7.95 10.16 11.91 15.88 19.05 22.23 25.40 28.58

11.90 15.09 18.00 24.10 30.10 36.10 42.00 48.00

1.50 2.00 2.40 3.10 3.90 4.70 5.60 6.40

3.96 5.08 5.94 7.92 9.53 11.10 12.70 14.20

45.6 57.4 71.5 91.6 111.6 141.0 151.8 181.4

47.00 59.10 73.20 93.30 116.30 145.20 156.80 186.60

14.38 18.11 22.78 29.29 35.76 45.44 48.87 58.55

I Renold Transmission Chain Catalogue

Section 1

Renold ANSI Xtra Chain

RENOLD ANSI XTRA...

Xtra round components with seamless roller/bush

Xtra shock resistant pins

Shock resistant

Fatigue resistant

Xtra finish shot peening ball drifting Xtra security interference fits

High loads

Xtra thick plates resists heavy loads

... THE HEAVY DUTY CHAIN

Product description RENOLD ANSI XTRA chain incorporates the usual Renold performance enhancing features including seamless bushes, ball drifted plate holes, shot peening and optimum interference fits. The extra features incorporated into this range of chain is classified by:

â€˘ Thicker side plates denoted by 'H'. These plates are approximately 20% thicker than standard ANSI chain

â€˘ Through hardened pins, denoted by 'V' The gearing dimensions of ANSI XTRA chain are identical to our standard ANSI simplex

range and will therefore run on standard sprockets. The larger transverse pitch of duplex and triplex chains with heavy duty side plates (H or HV range) require special sprockets. The range can therefore be summarised as follows: H Range - Identical to standard ANSI chain with the exception of the overall width. Thicker plates give this chain excellent resistance to heavy loads and help absorb shock. Duplex and triplex chain must have sprockets with an increased transverse pitch of the teeth.

No.4

No. 11/58

No. 107

No. 26

V Range - Identical dimensions to standard ANSI chain but with a higher breaking load and excellent resistance to shock loads. HV Range - A combination of the 'H' and 'V' chain, giving excellent resistance to both heavy and shock loads. A further enhancement to the chain life can be achieved by hardening the sprocket teeth of the drive. 'H' and 'HV' chains are designed for improved fatigue life, therefore offset and slip fit joints which have a lower fatigue resistance are not recommended. Shown below is an easy to use features guide to help in selecting chain to suit its application.

Chain Type

Strength

Wear

Heavy Loads

Shock Loads

High Speeds

Standard ANSI XTRA H Range XTRA V Range XTRA HV Range

Good Good Excellent Excellent

Excellent Excellent Good Good

Good Excellent Good Excellent

Good Good Excellent Excellent

Excellent Not Suitable Good Not Suitable

Renold Transmission Chain Catalogue

I 31

ANSI XTRA roller chain is specifically designed and manufactured for arduous applications where frequent, impulsive or heavy loads are involved, or where operating conditions are Chain Ref. Renold Chain No.

severe as in the mining, quarrying, rock drilling, forestry and construction industries. This chain is interchangeable with our standard ANSI range and can be used to upgrade the

performance of existing applications subject to normal design and installation checks. Multiplex versions are also available on request.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 58

MIN

ANSI Xtra - simple and multiplex A

60HR 60H-2R 60H-3R 60HVR 60HV-2R 60HV-3R

60H-1 60H-2 60H-3 60HV-1 60HV-2 60HV-3

0.750 0.750 0.750 0.750 0.750 0.750

19.050 19.050 19.050 19.050 19.050 19.050

12.570 12.570 12.570 12.570 12.570 12.570

11.910 11.910 11.910 11.910 11.910 11.910

17.500 17.500 17.500 17.500 17.500 17.500

3.170 3.170 3.170 3.170 3.170 3.170

5.940 5.940 5.940 5.940 5.940 5.940

28.600 57.000 83.100 28.600 57.000 83.100

4.600 4.600 4.600 4.600 4.600 4.600

26.110 26.110 26.110 26.110

31300 62600 93900 55000 110000 165000

1.800 3.600 5.400 1.800 3.550 5.300

80HR 80H-2R 80H-3R 80VR 80V-2R 80V-3R 80HVR 80HV-2R 80HV-3R

80H-1 80H-2 80H-3 80V-1 80V-2 80V-3 80HV-1 80HV-2 80HV-3

1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000

25.400 25.400 25.400 25.400 25.400 25.400 25.400 25.400 25.400

15.750 15.750 15.750 15.750 15.750 15.750 15.750 15.750 15.750

15.880 15.880 15.880 15.880 15.880 15.880 15.880 15.880 15.880

24.050 24.050 24.050 24.050 24.050 24.050 24.050 24.050 24.050

4.060 4.060 4.060 3.250 3.250 3.250 4.060 4.060 4.060

7.940 7.940 7.940 7.940 7.940 7.940 7.940 7.940 7.940

37.000 68.700 101.300 33.500 62.700 91.900 37.000 69.000 102.000

5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400 5.400

32.590 32.590 29.290 29.290 32.590 32.590

55600 112200 166800 75000 150000 225000 87000 174000 261000

3.300 6.600 9.900 2.800 5.500 8.300 3.300 6.600 9.900

100HR 100H-2R 100H-3R 100VR 100HVR 100HV-2R 100HV-3R

100H-1 100H-2 100H-3 100V-1 100HV-1 100HV-2 100HV-3

1.250 1.250 1.250 1.250 1.250 1.250 1.250

31.750 31.750 31.750 31.750 31.750 31.750 31.750

18.900 18.900 18.900 18.900 18.900 18.900 18.900

19.050 19.050 19.050 19.050 19.050 19.050 19.050

29.970 29.970 29.970 29.970 29.970 29.970 29.970

4.800 4.800 4.800 4.060 4.800 4.800 4.800

9.540 9.540 9.540 9.540 9.540 9.540 9.540

44.100 83.200 122.300 41.100 44.100 83.200 122.300

6.100 6.100 6.100 6.100 6.100 6.100 6.100

39.090 39.090 39.090 39.090

87000 174000 261000 122000 133450 266900 400350

4.800 10.300 15.500 4.200 4.800 10.300 15.450

120HR 120H-2R 120H-3R 120VR 120V-2R 120V-3R 120HVR 120HV-2R 120HV-3R

120H-1 120H-2 120H-3 120V-1 120V-2 120V-3 120HV-1 120HV-2 120HV-3

1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500

38.100 38.100 38.100 38.100 38.100 38.100 38.100 38.100 38.100

25.230 25.230 25.230 25.230 25.230 25.230 25.230 25.230 25.230

22.230 22.230 22.230 22.230 22.230 22.230 22.230 22.230 22.230

35.890 35.890 35.890 35.890 35.890 35.890 35.890 35.890 35.890

5.610 5.610 5.610 4.800 4.800 4.800 5.610 5.610 5.610

11.110 11.110 11.110 11.110 11.110 11.110 11.110 11.110 11.110

52.5300 105.000 158.00 50.800 96.300 141.700 52.500 52.500 158.000

6.600 6.600 6.600 6.600 6.600 6.600 6.600 6.600 6.600

48.870 48.870 45.440 45.440 48.870 48.870

125000 250000 375000 169000 338000 507000 182400 364800 400350

6.300 12.600 18.800 5.700 11.000 16.700 6.300 6.300 18.800

140HR 140H-2R 140H-3R 140VR 140V-2R 140V-3R 140HVR 140HV-2R 140HV-3R

140H-1 140H-2 140H-3 140V-1 140V-2 140V-3 140HV-1 140HV-2 140HV-3

1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750

44.450 44.450 44.450 44.450 44.450 44.450 44.450 44.450 44.450

25.230 25.230 25.230 25.230 25.230 25.230 25.230 25.230 25.230

25.400 25.400 25.400 25.400 25.400 25.400 25.400 25.400 25.400

41.810 41.810 41.810 41.810 41.810 41.810 41.810 41.810 41.810

6.350 6.350 6.350 5.610 5.610 5.610 6.350 6.350 6.350

12.710 12.710 12.710 12.710 12.710 12.710 12.710 12.710 12.710

57.900 106.900 160.400 54.900 103.600 152.400 57.900 106.900 160.400

7.400 7.400 7.400 7.400 7.400 7.400 7.400 7.400 7.400

52.200 52.200 48.870 48.870 52.200 52.200

170000 340000 510000 235000 470000 705000 258000 516000 774000

8.600 16.700 25.100 7.800 15.500 23.100 8.600 16.740 25.100

160HR 160H-2R 160H-3R 160VR 160HVR 160HV-2R 160HV-3R

160H-1 160H-2 160H-3 160V-1 160HV-1 160HV-2 160HV-3

2.000 2.000 2.000 2.000 2.000 2.000 2.000

50.800 50.800 50.800 50.800 50.800 50.800 50.800

31.550 31.550 31.550 31.550 31.550 31.550 31.550

28.580 28.580 28.580 28.580 28.580 28.580 28.580

47.730 47.730 47.730 47.730 47.730 47.730 47.730

7.110 7.110 6.350 6.350 7.110 7.110 6.350

14.290 14.290 14.290 14.290 14.290 14.290 14.290

68.500 130.400 182.900 65.500 68.500 130.400 182.900

7.900 7.900 7.900 7.900 7.900 7.900 7.900

61.900 61.900 61.900 61.900

223000 446000 669000 289000 311400 622800 934250

11.200 23.500 35.200 10.400 11.200 23.500 35.200

180HR 180H-2R 180H-3R 180VR 180HVR 180HV-2R 180HV-3R

180H-1 180H-2 180H-3 180V-1 180HV-1 180HV-2 180HV-3

2.250 2.250 2.250 2.250 2.250 2.250 2.250

57.150 57.150 57.150 57.150 57.150 57.150 57.150

35.480 35.480 35.480 35.480 35.480 35.480 35.480

35.710 35.710 35.710 35.710 35.710 35.710 35.710

53.510 53.510 53.510 53.510 53.510 53.510 53.510

8.130 8.130 8.130 7.110 8.130 8.130 8.130

17.460 17.460 17.460 17.460 17.460 17.460 17.460

73.900 140.800 206.00 73.900 73.900 140.800 206.000

9.100 9.100 9.100 9.100 9.100 9.100 9.100

65.840 65.840 65.840 65.840

281000 562000 843000 382500 422500 845000 1267500

15.200 30.400 45.600 13.940 15.200 30.400 45.600

200HR 200H-2R 200H-3R 200VR 200HVR 200HV-2R 200HV-3R

200H-1 200H-2 200H-3 200V-1 200HV-1 200HV-2 200HV-3

2.500 2.500 2.500 2.500 2.500 2.500 2.500

63.500 63.500 63.500 63.500 63.500 63.500 63.500

37.850 37.850 37.850 37.850 37.850 37.850 37.850

39.670 39.670 39.670 39.670 39.670 39.670 39.670

59.560 59.560 59.560 59.560 59.560 59.560 59.560

9.650 9.650 9.650 8.130 9.650 9.650 9.650

19.850 19.850 19.850 19.850 19.850 19.850 19.850

86.400 164.700 243.00 80.300 86.400 164.700 243.000

10.200 10.200 10.200 10.200 10.200 10.200 10.200

78.310 78.310 78.310 78.310

347000 694000 1041000 445000 600500 1201000 1801500

19.500 39.000 57.700 17.300 19.500 39.000 57.700

240HR 240H-2R 240H-3R 240HVR 240HV-2R 240HV-3R

240H-1 240H-2 240H-3 240HV-1 240HV-2 240HV-3

3.000 3.000 3.000 3.000 3.000 3.000

76.200 76.200 76.200 76.200 76.200 76.200

47.350 47.350 47.350 47.350 47.350 47.350

47.630 47.630 47.630 47.630 47.630 47.630

71.300 71.300 71.300 71.300 71.300 71.300

13.200 13.200 13.200 13.200 13.200 13.200

23.800 23.800 23.800 23.800 23.800 23.800

106.900 208.00 309.200 106.900 208.000 312.000

10.500 10.500 10.500 10.500 10.500 10.500

101.22 101.22 101.22 101.22

500000 1000000 1500000 845160 1690320 2535480

30.500 61.000 91.500 30.500 61.000 91.500

NB: Both Split and roll pin options are available on all sizes, although we would recommend roll pin on quadruplex and above. Before specifying / using crank links or other connecting links please consult Renold.

Section 1

Renold ANSI Xtra Chain

I Renold Transmission Chain Catalogue

Renold Multiplex Section 1

ANSI Standard

Chain Ref. Renold Chain No.

No.4

No. 26

No. 107

No. 11/58

Technical Details (mm) ISO Ref.

ANSI No.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height Inner

Plate Width Outer

Plate Width

Pin Diam.

Pin Length

Conn. Link Transverse Extension Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11/58

No. 26

MIN

ANSI Standard - Multiplex A

40-4R

08A-4

40-4

0.500

12.700

7.85

7.92

11.15

1.55

3.98

59.7

3.9

14.38

67600

2.50

50-4R 50-5R 50-6R

10A-4 10A-5 10A-6

50-4 50-5 50-6

0.625 0.625 0.625

15.875 15.875 15.875

9.40 9.40 9.40

10.16 10.16 10.16

14.55 14.55 14.55

2.03 2.03 2.03

5.07 5.07 5.07

75.2 93.3 111.3

4.1 4.1 4.1

18.11 18.11 18.11

111200 139000 166800

4.20 5.25 6.30

60-4R 60-5R 60-6R

12A-4 12A-5 12A-6

60-4 60-5 60-6

0.750 0.750 0.750

19.050 19.050 19.050

12.57 12.57 12.57

11.91 11.91 11.91

17.45 17.45 17.45

2.39 2.39 2.39

5.96 5.96 5.96

94.3 116.9 139.7

4.6 4.6 4.6

22.78 22.78 22.78

151250 190000 226800

6.20 7.75 9.30

80-4R 80-5R 80-6R 80-8R

16A-4 16A-5 16A-6 16A-8

80-4 80-5 80-6 80-8

1.000 1.000 1.000 1.000

25.400 25.400 25.400 25.400

15.38 15.38 15.38 15.38

15.75 15.75 15.75 15.75

24.05 24.05 24.05 24.05

3.25 3.25 3.25 3.25

7.93 7.93 7.93 7.93

120.7 149.9 179.4 237.8

5.4 5.4 5.4 5.4

29.29 29.29 29.29 29.29

258000 322500 387000 516000

11.20 14.00 16.80 22.40

100-4R 100-5R 100-6R

20A-4 20A-5 20A-6

100-4 100-5 100-6

1.250 1.250 1.250

31.750 31.750 31.750

19.05 19.05 19.05

29.97 29.97 29.97

4.06 4.06 4.06

9.54 9.54 9.54

147.1 182.9 218.7

6.1 6.1 6.1

35.76 35.76 35.76

418150 522600 627200

16.80 21.00 25.20

120-4R 120-5R 120-6R 120-8R

24A-4 24A-5 24A-6 24A-8

120-4 120-5 120-6 120-8

1.500 1.500 1.500 1.500

38.100 38.100 38.100 38.100

25.68 25.68 25.68 25.68

22.23 22.23 22.23 22.23

35.89 35.89 35.89 35.89

4.80 4.80 4.80 4.80

11.11 11.11 11.11 11.11

185.7 231.2 276.6 367.6

6.6 6.6 6.6 6.6

45.44 45.44 45.44 45.44

570000 711700 854000 1138000

22.92 27.96 33.50 44.65

140-4R 140-5R 140-6R

28A-4 28A-5 28A-6

140-4 140-5 140-6

1.750 1.750 1.750

44.450 44.450 44.450

25.73 25.73 25.73

25.40 25.40 25.40

41.81 41.81 41.81

5.61 5.61 5.61

12.64 12.64 12.64

199.7 248.4 297.5

7.4 7.4 7.4

48.87 48.87 48.87

765000 956400 1147680

30.21 37.72 45.24

160-4R

32A-4

160-4

2.000

50.800

32.13

28.58

47.73

6.35

14.29

238.8

7.9

58.55

978600

38.90

200-4R

40A-4

200-4

2.500

63.500

38.15

39.67

59.56

8.13

19.81

291.6

10.2

71.55

1690000

68.24

Connecting links Note: No.12 Crank links - please consult Renold.

Renold Transmission Chain Catalogue

I 33

Straight Side Plate Section 1

ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

No.4

No. 26

No. 107

No. 12

No. 11/58

No. 30

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

MIN

MAX

Conn. Link Transverse Extension Pitch

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 26

No. 58

No. 12

No. 30

MIN

Simplex 110047 110057 110067 110080 110120 110140 110160

0.500 0.625 0.750 1.000 1.500 1.750 2.000

12.70 15.88 19.05 25.40 38.10 44.45 50.80

7.75 9.65 11.68 17.02 25.40 30.99 30.99

8.51 10.16 12.07 15.88 25.40 27.94 29.21

11.81 14.70 15.93 24.06 35.75 41.68 47.60

1.55 1.55 1.80 4.12 6.10 7.62 7.11

1.55 1.55 1.80 3.10 5.08 6.35 6.35

4.45 5.08 5.72 8.28 14.63 15.90 17.81

17.0 19.6 22.7 36.1 53.4 65.1 67.4

3.9 4.1 4.6 5.4 6.6 7.4 7.9

08B-2 10B-2 12B-2 16B-2 24B-2

0.500 0.625 0.750 1.000 1.500

12.70 15.88 19.05 25.40 38.10

7.75 9.65 11.68 17.02 25.40

8.51 10.16 12.07 15.88 25.40

11.81 14.70 15.93 21.08 35.75

1.55 1.55 1.80 4.12 6.10

1.55 1.55 1.80 3.10 5.08

4.45 5.08 5.72 8.28 14.63

31.0 36.2 42.2 68.0 101.8

3.9 4.1 4.6 5.4 6.6

13.92 16.59 19.46 31.88 48.36

08B-3 16B-3

0.500 1.000

12.70 25.40

7.75 17.02

8.51 15.88

11.81 24.06

1.55 4.12

1.55 3.10

4.45 8.28

44.9 99.9

3.9 5.4

13.92 31.88

08B-1 10B-1 12B-1 16B-1 24B-1 28B-1 32B-1

17800 22200 28900 60000 160000 200000 250000

0.70 0.92 1.20 3.45 7.45 9.35 10.10

31000 44500 57800 106000 280000

1.38 1.80 2.40 5.50 14.80

445000 160000

2.06 10.12

Duplex 114047 114057 114067 114080 114120

Triplex 116048 116080

I Renold Transmission Chain Catalogue

Cranked Link Chain Section 1

European (BS) Standard

No. 59

Chain Ref.

Technical Details (mm)

Renold Chain No.

API No.

Pitch (inch)

Pitch (mm)

Conn Link Inside Width

Roller Diam.

Plate Height

Plate Width

Pin Diam.

Pin Length

MIN

MAX

Tensile Strength

Weight

(Newtons)

kg/m

No.

MIN

Cranked Link Chain 181046 187050 184051 180847

API3 API4 -

Chain Ref. Renold Chain No.

3.067 3.075 4.063 5.000

77.900 78.100 103.200 127.000

39.850 38.280 49.380 70.030

41.400 31.800 44.500 63.500

46.630 40.160 58.290 88.900

10.920 9.780 12.950 16.130

18.550 16.540 22.340 31.760

104.390 96.770 127.510 161.290

409000 320285 667260 1380000

18.300 12.500 23.900 52.000

Technical Details (mm) Pitch (inch)

Pitch (mm)

Roller Diam.

Plate Width

Plate Height

Pin Diam.

Pin Length

MAX

Tensile Strength

Weight

(Newtons)

kg/m

MIN

Cranked Link Chain IS2065 JS882 JS1031 JS3075 JS3011 JS3514 JS4014 JS4106 JS1245A IS4121 IS4522 JS5031 1605AAA JS6042

2.000 2.609 3.075 3.075 3.067 3.500 4.063 4.063 4.073 4.090 4.500 5.000 5.000 6.000

50.800 52.553 78.105 78.105 77.902 88.900 103.200 103.200 103.454 103.886 114.300 127.000 127.000 152.400

C 28.575 22.225 31.750 31.750 41.275 44.450 44.450 44.450 45.244 47.625 57.150 63.500 63.500 76.200

F 7.938 6.350 7.938 9.525 9.525 12.700 12.700 12.700 14.288 14.288 14.288 15.875 19.050 19.050

39.243 28.575 38.100 42.863 57.150 57.150 57.150 57.150 60.325 69.850 76.200 88.900 88.900 101.600

15.062 11.113 15.875 16.434 19.050 22.250 22.250 22.250 23.800 25.349 27.915 31.750 34.925 38.100

73.819 62.706 83.344 89.694 89.694 102.394 111.919 111.919 121.444 118.269 125.413 146.844 161.925 174.625

14,612 5,845 10,790 16,860 24,728 31,472 31,472 15,736 38,216 47,208 49,456 62,944 78,680 94,416

11.307 5.356 10.861 13.390 19.490 25.739 22.912 23.207 27.822 35.707 37.195 53.561 64.720 69.034

Renold Transmission Chain Catalogue

I 35

Hollow Pin Chain Section 1

European (BS) Standard / ANSI Standard

No. 4

Chain Ref. Renold Chain No.

No. 26

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Conn Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Bore

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 26

MIN

European (BS) Standard - Simplex Bush Chain 1204387 1204989 1203629 1000947 1000884 1000948

0.500 1.000 1.000 1.968 2.000 3.937

12.70 25.40 25.40 50.00 50.80 100.00

7.75 12.70 12.70 10.00 10.00 10.00

8.51 15.88 15.88 30.00 30.00 30.00

12.1 23.0 23.0 27.5 25.5 25.5

1.51 3.00 3.00 3.00 3.00 3.00

4.50 6.00 7.05 8.20 8.20 8.20

16.5 30.8 30.8 26.0 26.0 26.0

1.1 1.3 1.3 4.0 4.0 4.0

12000 70000 40000 60000 60000 60000

0.66 2.22 2.20 2.20 2.10 1.50

10500

0.61

18000 28500 60000

1.05 1.39 2.20

European (BS) Standard - Simplex Stainless Steel Chain 1206742

0.500

12.70

7.75

8.51

12.5

1.51

4.58

16.5

1.1

ANSI Standard - Simplex Bush Chain 50HP-1 60HP-1 80HP-1

0.625 0.750 1.000

15.88 19.05 25.40

9.40 12.70 15.88

10.16 11.91 15.88

15.1 17.5 25.0

2.00 2.40 2.70

2.00 2.40 3.70

5.10 6.00 9.50

20.4 25.3 34.0

1.0 1.3 5.1

I Renold Transmission Chain Catalogue

Double Pitch Chain Section 1

ISO 1275 / ANSI B29.00

No.4

Chain Ref. Renold Chain No.

No.11/58

No.107

No.12

No.30

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Connecting Links

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

Transverse Pitch

MIN

MAX

NOM

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

No. 4

No. 107

No. 11

No. 58

No. 12

No. 30

MIN

ISO 1275 - Simplex A

113083* 113103* 113123*

208B 210B 212B

1.00 1.25 1.50

25.40 31.75 38.10

7.75 9.65 11.68

8.51 10.16 12.07

11.43 13.72 15.88

1.55 1.55 1.80

4.45 5.08 5.72

16.6 19.6 22.7

3.9 4.1 4.6

19000 23000 30500

0.53 0.66 0.90

113168 113203 113243

216B 220B 224B

2.00 2.50 3.00

50.80 63.50 76.20

17.02 19.56 25.40

15.88 19.05 25.40

20.83 24.64 33.53

4.12 4.12 6.10

3.10 3.61 5.08

8.28 10.19 14.63

36.1 43.2 53.4

5.4 6.1 6.6

67000 98070 166700

1.80 2.45 4.80

113323

232B

4.00

101.60

30.99

29.21

40.13

7.11

6.35

17.81

67.4

7.9

255000

5.95

14100 22200 38000 65000 137000 185900 305500

0.50 0.84 1.44 2.42 3.47 4.93 8.00

14100 22200 38000 65000 137000 185900 305500

0.82 1.26 2.03 3.36 5.65 7.90 12.80

14100 22200 31800 56700

0.40 0.70 1.05 1.76

ANSI Standard - Conveyor Small Roller C2040R* C2050R* C2060R* C2080R* C2100H* C2120H* C2160H*

1.00 1.25 1.50 2.00 2.50 3.00 4.00

25.40 31.75 38.10 50.80 63.50 76.20 101.60

7.85 9.40 12.57 15.75 19.00 25.40 31.50

7.92 10.16 11.91 15.88 19.05 22.23 28.58

11.80 15.00 17.80 24.10 28.80 35.10 47.90

1.50 2.00 3.17 4.00 4.75 5.61 7.30

3.97 5.09 5.95 7.92 9.54 11.11 14.29

17.8 21.8 28.6 35.8 42.4 52.4 65.6

3.9 4.1 4.6 5.4 4.3 5.3 6.7

ANSI Standard - Conveyor Large Roller C2042R* C2052R* C2062R* C2082R* C2102H* C2122H* C2162H*

1.00 1.25 1.50 2.00 2.50 3.00 4.00

25.40 31.75 38.10 50.80 63.50 76.20 101.60

7.85 9.40 12.57 15.75 19.00 25.40 31.50

15.88 19.05 22.23 28.58 39.67 44.45 57.15

11.80 15.00 17.80 24.10 28.80 35.10 47.90

1.50 2.00 3.17 4.00 4.75 5.61 7.30

3.97 5.09 5.95 7.92 9.54 11.11 14.29

17.8 21.8 28.6 35.8 42.4 5.4 65.6

3.9 4.1 4.6 5.4 4.3 5.3 6.7

ANSI Standard - Drive Chain A2040 A2050 A2060 A2080

* Straight side plate

1.00 1.25 1.50 2.00

25.40 31.75 38.10 50.80

7.85 9.40 12.57 15.75

7.92 10.16 11.91 15.88

11.80 15.00 17.80 24.10

1.50 2.00 2.40 3.00

3.97 5.09 5.95 7.92

17.8 21.8 26.9 33.5

3.9 4.1 4.6 5.4

Renold Transmission Chain Catalogue

I 37

Sidebow Roller Chain Section 1

European (BS) Standard

Chain Ref. Renold Chain No.

No.4

No. 26

No. 107

No. 12

No. 11

No. 30

Technical Details (mm) Pitch (inch)

Pitch (mm)

Inside Width

Roller Diam.

MIN

MAX

Conn. Links Plate Height

MAX

Plate Width

MAX

Plate Width Inner MAX

Pin Diam. Outer MAX

Pin Length

MAX

Conn. Link Extension

Bow Radius

MAX

ISO606 Tensile

Weight Strength

No. 4

(Newtons)

kg/m

0.39 0.58 0.69 0.85 1.18 2.50 0.69

No. 11

No. 26

MIN

Simplex

1202219 1206046# 1205319 1200180 1201871 1205954 1202031†

0.375 0.500 0.500 0.625 0.750 1.000 1.250

9.520 12.700 12.700 15.875 19.050 25.400 31.750

5.72 7.85 7.75 9.65 11.68 17.02 9.53

6.35 7.95 8.51 10.16 12.07 15.88 10.16

8.26 11.89 11.89 13.72 15.93 20.57 15.00

1.30 1.55 1.55 1.55 1.80 4.12 2.00

1.30 1.55 1.55 1.55 1.80 3.10 2.00

3.28 3.42 4.45 4.70 5.72 8.27 4.45

13.5 17.0 17.0 18.7 22.7 36.1 21.8

3.3 3.9 3.9 4.1 4.6 5.4 4.1

195 350 400 450 650 750 650

9000 13000 19000 22400 29000 65000 222000

#Based on ANSI 40 chain. †Based on ANSI 2050 extended pitch chain. Sidebow chain, unlike standard chain, is manufactured with larger clearances between the pin and bush diameters. Therefore, the tolerance over a length of chain is +0.3% and not +0.15% as for standard chain.

Renold sidebow chain

Product description

Application: Renold sidebow chain is used on curved track conveyors in the bottling, packaging, canning and textile industries. Some typical applications for this chain are:

Renold sidebow chain is based on the ANSI and British Standard chain of its respective pitch size. The design of the chain requires a special pin diameter resulting in greater clearance between the pin and bush, allowing the chain to bow.

• To operate a live-roll conveyor on a power curve

• To carry materials around a curve by use of attachments or slats

• To transmit power where abnormal chain twist may be encountered

Attachments can be supplied for this chain, but are made to order. Selection of the chain is not covered in our selection procedures and we advise you to consult our technical staff with the details of your application.

Chain should be protected against dirt/ moisture and be lubricated with good quality non-detergent petroleum based oil. Renold Sidebow Chain is pre-lubricated before despatch, but like all chain it needs regular re-lubrication during its working life. For the majority of applications between -5°C and 60°C, a range of multigrade SAE 20/50 oil would be suitable. Special lubrication or coatings can be provided to match your applicational needs.

I Renold Transmission Chain Catalogue

Section 1

Standard Attachments

Clockwise from top K2 attachment, M1 attachment, extended bearing pin & K1 attachment

Renold Transmission Chain Catalogue

I 39

Standard Attachments

Note:

Renold standard power transmission chain can be adapted for conveying duties by the fitment of attachments shown on these pages. The attachments can be assembled on one or both sides of the chain at any desired pitch spacing.

1. K2 attachments cannot be assembled on adjacent inner and outer links on the same side of the chain. 2. M1 attachments cannot be assembled next to a No. 30 Cranked link double joint.

Bearing pins with an extension on one side of the chain can be built into chain at any desired pitch spacing and afford a simple means by which attachments or tubular staybars may be secured to chain. The pins for BS/DIN series chain are grooved for standard external type circlips to BS 3673 Part 2 (not supplied) so that, if required, attachments may be retained endwise or can be supplied as a standard straight extended pin.

No.4 Inner link

No.26 Connecting link-spring clip

No.107 Outer link

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

MIN

MAX

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

MIN

European (BS) Standard - Simplex 08B1 10B1 12B1 16B1 20B1 24B1

08B-1 10B-1 12B-1 16B-1 20B-1 24B-1

0.500 0.625 0.750 1.000 1.250 1.500

12.700 15.875 19.050 25.400 31.750 38.100

7.75 9.65 11.68 17.02 19.56 25.40

8.51 10.16 12.07 15.88 19.05 25.40

11.81 14.73 16.13 21.08 26.42 33.40

1.55 1.55 1.80 4.12 4.62 6.10

1.55 1.55 1.80 3.10 3.61 5.08

4.45 5.08 5.72 8.28 10.19 14.63

17.0 19.6 22.7 36.1 43.2 53.4

3.9 4.1 4.6 5.4 6.1 6.6

17800 22200 28900 60000 95000 160000

0.70 0.92 1.20 2.80 3.85 7.45

Section 1

European (BS) Standard / ISO 606

I Renold Transmission Chain Catalogue

K1 Attachments Section 1

Renold & ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

08B 10B 12B 16B 20B

0.500 0.625 0.750 1.000 1.250

12.700 15.875 19.050 25.400 31.750

1.57 1.57 1.83 4.06 4.62

1.57 1.57 1.83 3.10 3.61

11.56 12.83 16.64 24.32 25.59

8.89 10.16 13.49 15.24 19.84

4.19 4.98 7.14 6.68 8.08

6.80 6.80 8.02 10.27 12.58

23.80 31.75 38.10 47.63 63.50

37.92 44.45 59.66 74.45 93.62

0.236 0.315 0.375 0.500 0.625 0.750 1.000 1.250 1.500

6.000 8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100

0.57 0.73 1.25 1.51 1.51 1.76 3.70 4.40 5.40

0.57 0.73 1.00 1.51 1.51 1.76 3.00 3.50 5.00

5.8 7.8 8.0 11.0 14.0 18.0 24.0 30.0 36.0

4.5 5.3 6.7 8.9 10.3 13.5 15.9 19.9 28.0

2.3 2.3 3.3 4.3 5.3 6.6 6.6 8.4 10.5

2.5 3.4 4.1 5.9 6.8 8.1 10.5 13.2 16.7

11.2 13.5 19.6 25.4 31.8 38.1 50.8 63.5 88.0

17.6 21.5 28.5 41.7 49.0 52.7 85.6 101.0 124.7

Renold Standard 08B1 10B1 12B1 16B1 20B1

ISO Standard 1161 05B1 06B1* 08B1 10B1 12B1 16B1 20B1 24B1 * Straight plate

04 05B 06B 08B 10B 12B 16B 20B 24B

I 41

Renold Transmission Chain Catalogue

K2 Attachments Section 1

Renold & ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

08B 10B 12B 16B 20B

0.500 0.625 0.750 1.000 1.250

12.700 15.875 19.050 25.400 31.720

1.57 1.57 1.83 4.06 4.62

1.57 1.57 1.83 3.10 3.61

8.890 10.160 11.430 15.875 19.840

4.85 4.98 5.54 8.08 8.08

6.80 6.80 8.02 10.27 12.58

24.50 29.97 35.48 45.91 58.10

12.700 15.875 19.050 25.400 31.750

25.40 31.75 34.93 57.15 63.50

40.46 45.57 51.13 78.26 93.62

0.375 0.500 0.625 0.750 1.000 1.250 1.500

6.000 8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100

0.57 0.73 1.25 1.51 1.51 1.76 3.70 4.40 5.40

0.57 0.73 1.00 1.51 1.51 1.76 3.00 3.50 5.00

4.5 5.3 6.7 8.9 10.3 13.5 15.9 19.9 28.0

2.3 2.3 3.3 4.3 5.3 6.6 6.6 8.4 10.5

2.5 3.4 4.1 5.9 6.8 8.1 10.5 13.2 16.7

11.1 14.8 19.6 24.4 29.9 35.4 46.2 57.0 71.5

6.0 8.0 9.5 12.7 15.9 19.0 26.4 31.7 38.1

11.2 13.5 19.6 25.4 31.8 38.1 50.8 63.5 88.0

17.6 21.5 28.5 41.7 49.6 48.8 85.6 101.0 124.7

Renold Standard 08B1 10B1 12B1 16B1 20B1

ISO Standard 1161 05B1 06B1* 08B1 10B1 12B1 16B1 20B1 24B1 * Straight plate

04 05B 06B 08B 10B 12B 16B 20B 24B

I Renold Transmission Chain Catalogue

M1 Attachments Section 1

Renold & ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

08B 10B 12B 16B 20B

0.500 0.625 0.750 1.000 1.250

12.700 15.875 19.050 25.400 31.750

1.57 1.57 1.83 4.06 4.62

1.57 1.57 1.83 3.10 3.61

11.56 12.83 16.64 24.32 25.59

19.00 22.54 31.98 34.13 46.02

12.700 15.875 22.230 23.800 31.750

4.19 4.98 7.14 6.73 8.20

6.80 6.80 8.02 10.27 12.58

04 05B 06B 08B 10B 12B 16B 20B 24B

0.375 0.500 0.625 0.750 1.000 1.250 1.500

6.000 8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100

0.57 0.73 1.25 1.51 1.51 1.76 3.70 4.40 5.40

0.57 0.73 1.00 1.51 1.51 1.76 3.00 3.50 5.00

5.80 7.80 8.00 11.00 14.00 18.00 24.00 30.00 36.00

10.0 11.9 14.5 20.8 24.9 28.2 39.7 47.5 61.5

6.8 8.6 10.1 13.0 16.5 21.0 23.0 30.5 42.7

2.3 2.3 3.3 4.3 5.3 6.6 6.6 8.4 10.5

2.5 3.4 4.1 5.9 6.8 8.1 10.5 13.2 16.7

Renold Standard 08B1 10B1 12B1 16B1 20B1

ISO Standard 1161 05B1 06B1* 08B1 10B1 12B1 16B1 20B1 24B1 * Straight plate

I 43

Renold Transmission Chain Catalogue

M2 Attachments Section 1

ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

ISO Standard 1161 05B1 06B1* 08B1 10B1 12B1 16B1 20B1 24B1 * Straight plate

04 05B 06B 08B 10B 12B 16B 20B 24B

0.375 0.500 0.625 0.750 1.000 1.250 1.500

6.000 8.000 9.525 12.700 15.875 19.050 25.400 31.750 38.100

0.57 0.73 1.25 1.51 1.51 1.76 3.70 4.40 5.40

0.57 0.73 1.00 1.51 1.51 1.76 3.00 3.50 5.00

10.0 11.9 14.5 20.8 24.9 28.2 39.7 47.5 61.5

6.8 8.6 10.1 13.0 16.5 21.0 23.0 30.5 42.7

2.3 2.3 3.3 4.3 5.3 6.6 6.6 8.4 10.5

2.5 3.4 4.1 5.9 6.8 8.1 10.5 13.2 16.7

11.1 14.8 17.6 24.4 29.9 35.4 46.2 57.0 71.5

6.0 8.0 9.5 12.7 15.9 19.0 25.4 31.7 38.1

I Renold Transmission Chain Catalogue

Section 1

Double Pitch K1/K2 Attachments

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

1.00 1.25 1.50 2.00 2.50 3.00

25.40 31.75 38.10 50.80 63.50 76.20

1.51 1.51 1.76 3.70 4.40 5.40

1.51 1.51 1.76 3.00 4.10 5.00

23.8 25.4 20.0 40.0 40.0 70.0

8.5 10.5 12.2 17.0 21.0 28.0

4.3 5.3 6.4 8.4 10.5 10.5

5.8 7.4 8.2 10.3 11.3 16.7

27.6 31.6 35.2 58.0 69.0 88.0

42.5 48.5 54.8 83.8 98.7 124.7

Renold BS K1 Attachments 113083* 113103* 113123* 113168 113203 113243

208B 210B 212B 216B 220B 224B

* Straight plate

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Renold BS K2 Attachments A 113083* 113103* 113123* 113168 113203 * Straight plate

208B 210B 212B 216B 220B

1.00 1.25 1.50 2.00 2.50

25.40 31.75 38.10 50.80 63.50

1.51 1.51 1.76 3.70 4.40

1.51 1.51 1.76 3.00 4.10

8.5 10.5 12.2 17.0 21.0

4.3 5.3 6.4 8.4 10.5

5.8 7.4 8.2 10.3 11.3

37.1 46.7 54.4 71.3 86.5

12.7 15.8 19.0 25.4 31.7

27.6 31.6 35.2 58.0 69.0

42.5 48.5 54.8 83.8 98.7

I 45

Renold Transmission Chain Catalogue

Section 1

Double Pitch M1/M2 Attachments

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

1.00 1.25 1.50 2.00 2.50 3.00

25.40 31.85 38.10 50.80 63.50 76.20

1.51 1.51 1.73 3.70 4.40 5.40

1.51 1.51 1.73 3.00 4.10 5.00

23.8 25.4 20.0 40.0 40.0 70.0

20.8 24.9 28.3 40.0 48.7 61.5

13.7 16.5 18.5 27.4 33.0 42.7

4.3 5.3 6.4 8.4 10.5 10.5

5.8 7.4 8.2 10.3 11.3 16.7

Renold BS M1 Attachments 113083* 113103* 113123* 113168 113203 113243

208B 210B 212B 216B 220B 224B

* Straight plate

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

1.00 1.25 1.50 2.00 2.50 3.00

25.40 31.75 38.10 50.80 63.50 76.20

1.51 1.51 1.76 3.70 4.40 5.40

1.51 1.51 1.76 3.00 4.10 5.00

20.8 24.9 28.3 40.0 48.7 61.5

13.7 16.5 18.5 27.4 33.0 42.7

4.3 5.3 6.4 8.4 10.5 10.5

5.8 7.4 8.2 10.3 11.3 16.7

37.1 46.7 54.4 71.3 86.5 -

12.7 15.8 19.0 25.4 31.7 38.1

Renold BS M2 Attachments 113083* 113103* 113123* 113168 113203 113243 * Straight plate

208B 210B 212B 216B 220B 224B

I Renold Transmission Chain Catalogue

Extended Bearing Pins Section 1

European (BS) Standard / ISO 606

Extended pin + circlip groove (type C) to suit standard external circlips to BS3673 Part 2

Chain Ref. Renold Chain No.

Unit assemblies

No 163 Outer link

No 165 Connecting link - spring clip

No 164 Outer link

No 166 Connecting link - spring clip

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

Pin Diam.

Extension Length to Circlip Groove

Circlip Groove Width

Circlip Groove Diam.

Chain track from chain Centre line

MAX

MIN

MAX

Extended pins with circlip groove (clip not supplied unless specifically requested)

Type C 08B1 10B1 12B1 16B1

08B-1 10B-1 12B-1 16B-1

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

4.45 5.08 5.72 8.28

7.19 9.45 11.81 15.75

0.58 0.71 0.71 1.02

3.18 3.73 4.78 6.93

17.78 21.34 25.15 36.58

Extended pin (type D)

Chain Ref. Renold Chain No.

Unit assemblies

ISO Ref.

Pitch (inch)

Pitch (mm)

Pin Diam.

Extension Length

±0.01

±0.25

Pin Length

Type D - ISO 606

* Straight side plate

No 565 Connecting link - spring clip

No 564 Outer link

No 566 Connecting link - spring clip

Technical Details (mm)

MAX

06B1* 08B1 10B1 12B1 16B1 20B1 24B1

No 563 Outer link

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1 24B-1

0.375 0.500 0.625 0.750 1.000 1.250 1.500

9.525 12.700 15.875 19.050 25.400 31.750 38.100

3.28 4.45 5.08 5.72 8.28 10.19 14.63

11.3 14.8 17.6 20.7 33.3 38.3 50.3

23.8 31.0 36.2 42.4 68.0 79.7 101.8

Straight extended pin

Renold Transmission Chain Catalogue

I 47

Attachment Chain Connecting Links Section 1

European (BS) Standard / ISO 606

No240

No 272

No 140

No 172

No144

No 175

No242

No 276

No 142

No 176

No145

No 180

No270

No 278

No 170

No 178

No 174

No 181

No 163

No 165

No 563 Outerlink

No 565 Connecting link- spring clip

No 164

No 166

No 564 Outerlink

No 566 Connecting link- spring clip

Special or adapted roller chain In addition to our ranges of standard series chain we can also offer:

• Roller Chain up to 300mm pitch and 450 tonnes breaking load

• Standard Series Chain adapted to your unique needs with special attachments

• Special Chain designed with integral attachments to meet individual requirements Renold adapted chain can be in the form of special plates, pin rollers, or blocks which can be designed, manufactured and assembled into chain of all pitch sizes. Attachments can be made from normal materials, stainless steel or plastics. We will be pleased to receive details of your requirements and evaluate them for strength, durability, price and despatch. They can be manufactured from your own designs or adapted from existing drawings. The illustrations show only a small selection of the wide range of variants and these chains have been used successfully in many branches of industry for the feeding, conveying and discharge of a variety of products.

I Renold Transmission Chain Catalogue

Standard Attachments Section 1

ANSI standard Note:

1. K2 attachments cannot be assembled on adjacent inner and outer links on the same side of the chain. 2. M1 attachments cannot be assembled next to a No. 30 (Cranked link double) joint.

No.4 Inner link

No.107 Riveting pin link

Chain Ref.

No.26 Connecting link-spring clip (for chains up to .75” pitch)

No.58 Connecting link-press fit (for chains of 1” pitch)

Technical Details (mm)

Renold Chain No.

ANSI Ref.

Pitch (inch)

Pitch (mm)

Inside Width

Roller Diam.

Plate Height

Plate Width Inner

Plate Width Outer

Pin Diam.

Pin Length

Conn. Link Extension

MIN

MAX

ISO606 Tensile Strength

Weight

(Newtons)

kg/m

MIN

ANSI Standard - Simplex 35A1◊ 40A1 50A1 60A1 80A1 ◊ Bush chain

35 40 50 60 80 ◊◊

Bush diameter.

0.375 0.500 0.625 0.750 1.000

9.525 12.700 15.875 19.050 25.400

4.68 7.85 9.40 12.58 15.75

5.080◊◊ 7.920 10.160 11.910 15.880

8.66 11.15 14.55 17.45 24.05

1.30 1.55 2.03 2.39 3.25

3.59 3.98 5.07 5.96 7.93

15.5 17.8 21.8 26.9 33.5

3.3 3.9 4.1 4.6 5.4

7900 13900 21800 31300 55600

0.33 0.63 1.05 1.55 2.80

I 49

Renold Transmission Chain Catalogue

K1 Attachments Section 1

ANSI B29.100 / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

40 50 60 80

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

1.52 2.03 2.39 3.15

9.50 12.70 15.90 19.05

7.900 10.300 12.140 15.875

3.20 5.20 5.20 6.73

6.01 7.54 9.04 11.43

25.3 31.8 38.1 50.8

35.30 46.02 54.23 70.08

ANSI Standard 40A1 50A1 60A1 80A1

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

1.51 2.00 2.40 3.00

9.5 12.7 15.9 24.0

7.9 10.3 11.9 15.9

3.3 5.3 5.3 6.6

5.5 7.2 8.6 12.1

25.4 31.8 38.2 50.8

35.8 49.8 58.0 82.6

ANSI Standard 40A1 50A1 60A1 80A1

40 50 60 80

I Renold Transmission Chain Catalogue

K2 Attachments Section 1

ANSI B29.100 / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

1.51 2.00 2.40 3.00

7.9 10.3 11.9 15.9

3.3 5.3 5.3 6.6

5.5 7.2 8.6 12.1

24.0 29.9 35.6 46.2

12.7 15.8 19.0 25.4

25.4 31.8 38.2 50.8

35.8 49.8 58.0 82.6

ISO/ANSI Standard 40A1 50A1 60A1 80A1

40 50 60 80

K1 attachment

M1 attachment

K2 attachment

M2 attachment

Renold Transmission Chain Catalogue

I 51

M1 Attachments Section 1

ANSI B29.100 / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

1.52 2.03 2.39 3.15

9.50 12.70 15.90 19.05

17.40 22.73 26.36 34.29

12.42 15.70 18.19 24.59

3.20 5.20 5.20 6.73

6.01 7.54 9.04 11.43

ANSI Standard 40A1 50A1 60A1 80A1

40 50 60 80

Chain Ref. Renold Chain No.

Technical Details (mm) ISO Ref.

Pitch (inch)

Pitch (mm)

40 50 60 80

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

1.51 2.00 2.40 3.00

9.5 12.7 15.9 24.0

17.5 24.6 27.4 39.7

12.7 15.9 18.3 24.6

3.3 5.3 5.3 6.6

5.5 7.2 8.6 12.1

ISO/ANSI Standard 40A1 50A1 60A1 80A1

I Renold Transmission Chain Catalogue

M2 Attachments Section 1

ANSI B29.100 / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

40 50 60 80

0.500 0.625 0.750 1.000

12.700 15.875 19.050 25.400

1.51 2.00 2.40 3.00

17.5 24.6 27.4 39.7

12.7 15.9 18.3 24.6

3.3 5.3 5.3 6.6

5.5 7.2 8.6 12.1

24.0 29.9 35.6 46.2

12.7 15.8 19.0 25.4

ISO/ANSI Standard 40A1 50A1 60A1 80A1

Extended Bearing Pins ANSI B29.100 / ISO 606 Extended pin (type D)

Chain Ref. Renold Chain No.

Unit assemblies

No 463 Outer link

No 465 Connecting link-spring clip

No 467

No 464 Outer link

No 466 Connecting link-spring clip

No 468

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

Pin Diam.

Extension Length

±0.01

±0.25

Chain track from chain Centre line MAX

ANSI Standard 35A1◊ 40A1 50A1 60A1 80A1 ◊ Bush chain

35 40 50 60 80

0.375 0.500 0.625 0.750 1.000

9.525 12.700 15.875 19.050 25.400

3.58 3.96 5.08 5.94 7.92

9.53 9.73 11.89 14.27 19.05

15.5 18.0 22.4 27.2 35.7

Extended pin

I 53

Renold Transmission Chain Catalogue

Double Pitch K1/M2 Attachments Section 1

ANSI B29.100 / ISO 606

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

2040 2050 2060 C2060

1.00 1.25 1.50 1.50

25.40 31.75 38.10 38.10

1.51 2.00 2.40 3.17

23.8 25.4 28.6 28.6

9.1 11.1 14.7 14.7

3.3 5.3 5.3 5.3

5.7 7.4 8.8 8.8

25.4 31.8 42.8 42.8

40.6 48.9 58.0 61.6

ANSI Standard K1 113040 113050 113060 113560*

Chain Ref. Renold Chain No.

Technical Details (mm) ANSI Ref.

Pitch (inch)

Pitch (mm)

2040 2050 2060 C2060

1.00 1.75 1.50 1.50

25.40 31.75 38.10 38.10

1.51 2.00 2.40 3.17

23.8 25.4 28.6 28.6

20.9 24.9 30.2 30.2

11.1 14.3 19.0 19.0

3.3 5.3 5.3 5.3

5.7 7.4 8.8 8.8

ANSI Standard M1 113040 113050 113060 113560* * Straight Plate

I Renold Transmission Chain Catalogue

Attachment Chain Connecting Links Section 1

ANSI standard

No240

No272

No140

No172

No144

No175

No242

No276

No142

No176

No145

No180

No270

No278

No170

No178

No174

No181

No163*

No167*

No463

No465

No164*

No168*

No464

No466

Special or Adapted Roller Chain In addition to our ranges of standard series chain we can also offer:

• Roller Chain up to 300mm pitch and 450 tonnes breaking load

• Standard Series Chain adapted to your unique needs with special attachments

* Ansi 80

Renold Transmission Chain Catalogue

I 55

Renold Klik-Top™ Section 1

Polymer Block Chain

Klik-Top™ polymer block chain is quick to install, strong, suitable for use in hygienesensitive areas if required and will cut costly downtime experienced when using conventional polymer block chain. Klik-Top™ chain ensures reliability, quality and great value for money. Ideal for conveying delicate items such as glass, wood and packaging. You can have confidence in Klik-Top™ chain. • Short downtimes increased productivity • Durable polymer clip • Easily replaced in moments • Food industry approved • Base chain available in stainless steel

Conventional repair • • • • • • •

Remove chain Grind heads of bearing pins Push out bearing pins Dismantle damaged parts Assemble new spare parts Test flexibility Reinstall chain

It’s easy with Klik-Top™ • Remove damaged clip • Install new clip

I Renold Transmission Chain Catalogue

Renold Klik-Topâ„˘ Section 1

Polymer Block Chain

Renold No.

Part No. Chain

Part No. Conn. link

Part No. Clip

08B-1 08B-1

1603 1603 RF**

1215255 1210314

1323961 1317973

1323959 1317979

Similar DIN/ISO

Renold No.

Part No. Chain

Part No. Conn. link

Part No. Clip

12B-1 12B-1

1642 1642 RF**

1215541 1210318

1324233 1317977

1324100 1317981

Similar DIN/ISO

Renold No.

Part No. Chain

Part No. Conn. link

Part No. Clip

16B-1 16B-1

1666 1666 RF**

1215390 1210319

1324123 1317978

1324068 1317164

Similar DIN/ISO

** RF = The chain is made of rustproof and acid-resistant materials.

Renold Klik-Top Polymer Block Chain

Renold Transmission Chain Catalogue

I 57

Section 1

Polymer Block Chain

Example of Renold Rubber Block Chain

Renold Sextuplex Block Chain

Polymer block chain Renold Polymer Block Chain (Rubber Block Chain) has been specifically designed for use in the feed, conveying and on work discharge types of applications, where an undamaged surface finish is an essential requirement for your finished product. Renold Chain has been running successfully in all types of machinery and sectors of industry. Examples being:

• • • • • • • •

Woodworking Furniture Industry Profile Grinding Book Binding Conveying Plastic Tubes Glass Handling Cable Management Conveying of Fragile Components

The chain is based on ISO, DIN and ANSI standard, both Simplex and Duplex, the only difference being the overall pin length. Polymer block chain can be used in many different environments by simply changing the block material. The most popular chain in this catalogue being available from stock. The polymer block vulcanised onto the U-plate is wear resistant and has a shore hardness of 50 to 60. It is suitable for working temperatures up to a maximum of 80°C (176°F).

• Polymer block chain is only supplied in even

Other sizes of chain and block materials can be supplied, apart from the popular and made to order chain detailed in this catalogue. For special applications Renold multiplex chain, up to sextuplex, have been supplied and used successfully where a wider polymer block platform is required.

Popular range Iso No.

ANSI No.

Pitch (inch)

Type

08B-1 08B-2 12B-1 12B-2 24B-1

80 80-2 -

0.50 0.50 0.75 0.75 0.50 1.00 1.50

Simplex Duplex Simplex Duplex Simplex Duplex Simplex

pitch lengths, including a connecting link

• Chain can be supplied without polymer blocks, with the standard U-plates fitted to the outer links

• For a small extra charge chain can be zinc plated, but this will reduce the minimum breaking load of the chain by 10%

• The gearing dimensions of polymer block chain allows them to run on standard sprockets

Made to order sizes Iso No.

ANSI No.

Pitch (inch)

Type

04 06B-1 08B-3 10B-2 20B-1

6mm 0.375 0.500 0.625 1.250

Simplex Simplex Triplex Duplex Simplex

The block material specifications available are shown on page 56. For assistance with selecting the correct chain size, block type or profile for your application, contact our Technical Sales Department.

I Renold Transmission Chain Catalogue

Section 1

Polymer Block

Material code and details Code

Material Type

Shore Hardness

Wear Value DIN 53516 mm3

Colour

NR IR SBR BR EPDM NBR CR AU SI FSI FPM PUR PTFE

Natural Rubber Isoprene Rubber (Synth. polyisoprene) Styrene-Butadiene Rubber Butadiene Rubber (Polybutadiene) Ethylene-Propylene-Diene Polymer Acronitrille Butadiene Rubber Chloroprene Rubber (Polychloroprene) Polyester Urethane Rubber Silicone Resins Fluoric Silicone Resins Fluoropolymers Polyurethane Polytetrafluoroethylene

65 + / – 5 75 + / – 5 65 + / – 5 70 + / – 5 75 + / – 5 85 + / – 5 -

160 160 160 160* 160* 80 -

RAL1014 RAL7034 RAL1021 RAL3012 RAL8008 RAL1007 -

Ivory Yellow-Grey Cadmium-Yellow Beige-Red Olive-Brown Chrome-Yellow Transparent -

- Details available on request. * Renold design.

RAL 1007

RAL 1014

A customer specific design, hardness and wear specification of block is possible, but may be subject to minimum order quantities.

RAL 1021

RAL 3012

RAL 7034

RAL 8008

Polymer Block material colour may vary from the represented colours shown above.

Material mechanical values/resistance Type

Material

Tensile Strength Elongation at Fracture Rebond Resilience Wear Resistance Tear Strength Current Flow Resistance Temperature Hot -Air Degrees C Minimum Temperature Degrees C Age Resistance Ozone Resistance Benzine Resistance Oil and Grease Resistance Acid Resistance Alkali Resistance Resistance to Hot Water 1 = Excellent

2 = Very Good

3 = Good

SBR

IIR

EPDM

NBR

FSI

FPM

PUR

PTFE

1 1 2 2 2 1 +90 -50 3 4 6 6 3 3 3

2 1 2 2 3 1 +90 -40 3 4 6 6 3 3 3

5 2 3 2 3 2 +100 -40 3 4 4 5 3 3 2

6 3 1 1 5 2 +100 -60 3 3 5 6 3 3 3

4 2 6 3 4 2 +140 -40 2 2 6 6 2 2 1

5 3 3 3 4 2 +150 -40 1 1 5 4 1 2 2

5 2 3 2 4 4 +130 -40 3 3 1 1 4 3 3

3 2 3 2 3 3 +120 -30 2 2 2 2 2 2 3

2 2 3 1 4 3 +120 -20 2 2 1 1 5 5 5

6 4 3 5 6 1 +200 -80 1 1 5 1 5 5 5

6 4 3 5 6 1 +200 -80 1 1 1 1 4 4 4

5 3 5 4 3 4 +220 -25 1 1 1 1 1 1 2

1 2 2 1 1 2 +80 -35 1 1 2 2 6 6 6

1 3 NA 3 2 1 +260 -190 1 1 1 1 1 1 1

4 = Moderate

When choosing the material for your application, the table above can be used to select the material with the most appropriate properties.

5 = Poor

6 = Insufficient

For example, where an application has oil and grease present, NBR, AU, SI, FSI FPM and PTFE materials are suitable.

Contact our technical staff for more advice on the suitability of the materials shown.

Renold Transmission Chain Catalogue

I 59

Section 1

Polymer Block Chain Types Simplex roller chain Type Number

Profile without Blocks

Chain No.

Chain Fitted with Material Type

NBR

PUR

FPM

Based on 08B-1 0.500" Pitch 1870 2720 2750 4740 5800

1850 0520 -

1208770 MIN MIN MIN MIN MIN

MIN MIN MIN 1208782 1208783 1208784

1208781 MIN TR MIN TR TR

MIN ENQ ENQ ENQ ENQ ENQ

ENQ ENQ ENQ ENQ ENQ ENQ

MIN

Based on 12B-1 0.750" Pitch 5350

5130 4680 -

1208775 MIN

MIN MIN

1208788 TR

TR ENQ

ENQ ENQ

ENQ

Based on ANSI 80 1.000" Pitch 1120 1300 1310

0641 0570 -

1208779 MIN MIN TR

MIN MIN 1208793 TR

1208792 TR TR MIN

TR ENQ ENQ TR

ENQ ENQ ENQ TR

ENQ

Based on 24B-1 1.500" Pitch

0839 0830

12058788 -

MIN

ENQ

NBR

PUR

FPM

Duplex roller chain Type Number

Profile without Blocks

Chain No.

Chain Fitted with Material Type SI

Based on 08B-2 0.500" Pitch 0540 0560 0590 0610 0660 0810 0820 0910 1360 1760 2020 2520

0800 0530 -

1208771 MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN

MIN MIN MIN MIN MIN 1208786 MIN MIN MIN MIN MIN MIN 1208787

1208785 TR TR TR TR MIN TR TR TR TR MIN TR TR

MIN ENQ ENQ ENQ ENQ ENQ ENQ ENQ ENQ ENQ ENQ ENQ ENQ

MIN

Based on 12B-2 0.750" Pitch 0760 1480

0639 0630 -

1208776 MIN MIN

MIN 1208790 MIN

1208789 MIN TR

TR ENQ ENQ

ENQ MIN ENQ

ENQ

Based on ANSI 80-2 1.000" Pitch 1120 1300 1310

0510 0570 -

1208780 TR TR TR

MIN TR TR TR

TR TR TR TR

MIN = Made to order only. Minimum order quantity of 100M. TR = A tooling charge would be applied. Minimum order quantity of 100M. ENQ = Made to order only. Enquire for minimum order quantity Profile Drawings and dimensions are shown on pages 60 and 61.

I Renold Transmission Chain Catalogue

Section 1

Polymer Block Chain 0.500" pitch simple chain profiles

Profile No. 0520

Profile No. 2750

Profile No. 1870

Profile No. 2770

Profile No. 4740

Profile No. 5800

0.750" pitch simple chain profiles

Profile No. 4680

Profile No. 5350

1.000" pitch simple chain profiles

Profile No. 0570

Profile No. 1120

Profile No. 1300

Profile No. 1310

1.500" pitch simple chain profiles

Profile No. 0830

Renold Transmission Chain Catalogue

I 61

Polymer Block Chain Section 1

0.500" pitch duplex chain profiles

Profile No. 0530

Profile No. 0590

Profile No. 0910

Profile No. 0610

Profile No. 1360

Profile No. 0660

Profile No. 0540

Profile No. 0810

Profile No. 0560

Profile No. 0820

Profile No. 1760

Profile No. 2020

Profile No. 0630

Profile No. 0760

Profile No. 2520

0.750" pitch duplex chain profiles

1.000" pitch duplex chain profiles

Profile No. 0570

Profile No. 1120

Profile No. 1300

Profile No. 1310

Profile No. 1480

I Renold Transmission Chain Catalogue

Section 1

Renold Smartlink

Take advantage of Renold’s unique diagnostics technology to deliver maximum performance. • Ensure the smooth running of your chain drive

• Understand loadings applied to the chain • Diagnose problems with alignment • Pin point potential causes of reduced chain life

• Increase your production efficiency Is Smartlink™ suitable for my application? Is your problem caused by load? Then yes, Smartlink™ is for you! Is your problem caused by wear? Talk to Renold about our market-leading chain range

Smartlink: The world’s smallest data logger, unique to Renold

Renold Transmission Chain Catalogue

I 63

Level 1

Level 2

Level 3

Smartlink™ can help you in different ways. With a tiny microprocessor attached to the side plate, the unit can detect the stresses experienced by the chain as it travels through your machine.

To understand more about the working loads being applied to the chain drive there is a second level of diagnostics that Smartlink™ can provide using the same microprocessor unit on the chain but a higher level of sophistication in the remote handheld receiver. Using this receiver, more detailed information about the actual value of the load can be downloaded and transferred to a Windows-based PC. This data can be analysed to determine the exact location of the load peaks in the drive system.

Renold also has a much more sophisticated microprocessor available but this unit needs expert support, normally requiring the service of a Renold engineer. This solution would be used in situations where there are unresolved issues or in safety critical applications where an exact prediction of fatigue life is important.

Acting as an overload detector and controlled with a small infra-red remote control unit, the system can indicate when your chain exceeds a pre-determined load. This gives you the warning you need to inspect the system and ensure that it is safe to continue running the machine. Smartlink™ gives you the ability to reset the alarm condition using the remote control.

LEVEL 1 Chain size

LEVEL 3

1’’, 1.25’’, 1.5’’ ANSI & BS

From 1’’ to above

2Hz

4sec @ 4kHz

Sampling Rate Recording Time

LEVEL 2

N/A

Days

1hour @ 1.3Hz

Resolution

40 points of a third of the breaking load

200 points of a third of the breaking load

Battery life

Approximately 1 year*

5-10 hours

IP66

Depends on the installation

IP Protection (ability to resist ingress of liquid/debris) Type of information

Temperature Range

Visual Alarm

Visual Alarm Time at Level Level Crossing

Renold can work in partnership with you to resolve these sorts of issues. Having already helped major companies around the world including manufacturers of earth moving equipment, agricultural machinery, materials handling at ports and leisure rides at theme parks, Renold Smartlink™ represents a groundbreaking opportunity to fully understand system loads which may be detrimental to the perfect performance of your product.

Waveform Data Time at Level Level Crossing Rainflow Counting

0-60ºC**

By demonstrating actual system loads Smartlink™ technology will help you to optimise your products at an early stage. When your new product is being used for field trials, make sure Smartlink™ is present, detecting performance, giving you the full picture. Smartlink™ is even small enough to fit on 1" pitch roller chain. Light conveying applications such as those at chocolate manufacturers in the UK have benefited from trials that have given a better understanding of loads in the whole system. Improvements to drive layout and optimum chain selection have all been made possible by the step change in understanding which has resulted.

*Battery life depends on the time the unit remains switch on, amount of transmitted information and environment conditions. **Please contact Renold if your application doesn’t meet the temperature requirements.

Dimensions for the different units. A Smartlink 16B

52.00 20.42 13.00 17.73

Smartlink 80

52.00 20.42 13.00 17.73

Smartlink 20B

63.37 25.78 13.30 18.86

Smartlink 100

63.37 25.78 13.30 18.86

Smartlink 24B

78.79 30.89 13.30 19.88

Smartlink 120

78.79 30.89 13.30 19.88

Section 1

Renold Smartlink

I Renold Transmission Chain Catalogue

Roll-Ring® Section 1

Self Adjusting Chain Tensioner Roll-Ring® is a simple yet innovative chain tensioner made from a specially formulated polymer. The unique design is based upon a simple toothed ring that can be fitted to horizontal, vertical or diagonal drives in a matter of seconds, simply by placing it in-between the two strands of chain. When the drive is in use, the Roll-Ring® deforms to an elliptical shape, due to compression between the strands and completely asborbs any slack in the system. Roll-Ring® performs the job of a tensioner and a damper in one, and is ideally suited to applications where maintenance is difficult or impossible. Technical details Roll-Ring® chain tensioners provide tensioning using:

• Static tensioning force from the elastic ring • Dynamic tensioning force from the damping

Benefits

• It can be used in dusty and dirty

The Roll-Ring® chain tensioner provides cost effective, time saving installation and maintenance.

• The Roll-Ring® is a tensioner and damper

The advantages over other types of chain tensioners are:

• Free standing - no sprockets, bolts, plates, drilling or costly installation required

environments in one, thus reducing noise levels

• Roll-Ring® also works in reverse mode Roll-Ring® chain tensioners reduce chain wear and improve the quality and efficiency of the complete chain drive.

• The Roll-Ring® is easily installed where space limitations prohibit the use of conventional chain tensioners

• The Roll-Ring® is fitted in a matter of seconds • It is ready for use without any tools, tensioning equipment or any further alignment or adjustment

• It is fully effective in vertical and diagonal drives

• The Roll-Ring® works automatically, is maintenance free and self lubricating

of the working material

The innovative tensioner The Roll-Ring® chain tensioner is an elementary mechanism based on new principles and represents a major advance in technology:

• Roll-Ring® requires minimal technical effort • Its operation is astonishingly simple • All functions are integrated into a single component

• Roll-Ring® utilises the hollow space of the associated chain drive system giving greater flexibility to designers and specifiers

• Automatic positioning and self lubricating

Bottom: Snap-in installation

Top: Vibrations in an untensioned chain drive

Bottom: The Roll-Ring® chain tensioner tensions and dampens

Renold Transmission Chain Catalogue

I 65

Roll-Ring®

Case study: chocolate production A major chocolate manufacturer was experiencing serious problems with short chain life on a main production line and also had chain tensioning problems, due to the inaccessibility of the chain drives. Firstly, the short chain life (4-5 weeks) was overcome when the Renold Engineer recommended a change to nickel plated chains, which led to a new chain life of more than twelve months. Secondly, regular downtime due to the failure of the previous chains was extended through the fitting of chain tensioners and their ongoing adjustments over time. With a time sensitive maintenance policy, the chocolate manufacturer looked for a solution to speed up the tensioning of the replacement chain and Roll-Ring® provided that simple solution. The new Renold chain had to be adjusted to be near their ideal centres when fitted, and when the maximum compression was reached the Roll-Ring® was fitted by hand within seconds. No further adjustments had to be carried out due to the flexibility of the Roll-Ring® design and all future chain extension is automatically taken up during the chain’s life. With a large reduction in equipment downtime for tensioning adjustment, the chocolate manufacturer now enjoys significant time savings, cost savings and peace of mind.

Roll-Ring® chain tensioners in one of our test rigs

• Saving of maintenance time for tension adjustments

• Simple installation • Effective dampening • Unique solution The new principle The principle of the Roll-Ring® chain tensioner is based on two simple phenomena:

• The elastic ring engages with the chain drive strands and rolls between them in a pre-stressed condition taking up the shape of an ellipse

that there is at least one chain pitch between the Roll-Ring® and the smallest sprocket. The Roll-Ring® can also be positioned just as effectively outside this recommended area, as long as it is sufficiently prestressed. In this case, practical trial and error are recommended. Roll-Ring® chain tensioners can be used in line within the same chain strand, or parallel with each other in multi-strand chain drives. Please note that triplex chain drives only require two Roll-Rings® positioned on the outer strands.

• The constantly opposing movements of the load and slack strands cancel each other out, thereby holding the Roll-Ring® in position Installation and maintenance Roll-Ring® chain tensioners are maintenance free and can be fitted to a wide variety of chain drives with no installation down time. The requirement is that:

• There is a working space with a gap between the chain strands which is smaller than the reference diameter of the chain tensioner

• There is a sufficient gap between the chain drive sprockets We recommend that the chain tensioner is positioned between two chain strands such

Roll-Ring® chain tensioners are re-cyclable

Roll-Ring® installation and final dimensions Part No.

10503001

76.5

65.0

20.0

104.0

10603001 10603601

91.1 109.0

73.0 89.5

25.0 25.0

122.0 143.0

10802601 10803001 10803401

102.1 121.5 137.5

84.5 98.0 115.4

24.0 28.0 30.0

135.8 161.6 165.0

11002601 11003001 11003401

128.4 148.0 170.0

105.0 124.6 141.0

28.0 33.0 38.0

153.0 177.0 217.0

11202601 11203001 11203401

155.0 182.2 207.5

127.6 145.0 169.5

35.0 40.0 45.0

209.5 241.7 265.0

11602601 11603001

207.0 245.8

167.0 202.0

45.0 50.0

269.0 306.0

12003001

303.7

244.0

60.0

390.0

Value A includes a safety distance to the sprockets

Key A = Deflected PCD do = PCD

S = Max deflection di Inside Diameter

Section 1

Self Adjusting Chain Tensioner

I Renold Transmission Chain Catalogue

Roll-Ring® Section 1

Chain Tensioners Standard Product Range

Part No.

No. of teeth

ISO reference

10503001 10603001 10603601 10802601 10803001 10803401 10843001 11002601 11003001 11003401 11202601 11203001 11203401 11602601 11603001 12003001

30 30 36 26 30 34 30 26 30 34 26 30 34 26 30 30

05B 06B 06B 08B 08B 08B 081 \ 083 * 10B 10B 10B 12B 12B 12B 16B 16B 20B

10603001 10802601 10803001 10843001 11002601 11003001 11003401 11202601 11203001 11602601 11603001 12003001

30 26 30 30 26 30 34 26 30 26 30 30

35 40 40 41 50 50 50 60 60 80 80 100

20802601 20803001 20843001 21003001 21202601 21203001 21603001 22003001

26 30 30 30 26 30 30 30

08B 08B 081 \ 083 * 10B 12B 12B 16B 20B

Ultra Violet resistant Roll-Rings® for use in equipment where the Roll-Ring® is exposed to Ultra Violet Light ie. agricultural machinery, community service equipment, building machines etc.

For special operational temperatures lower or higher than those listed please consult Renold.

To fit all roller chain widths from 1/8 to 5/16".

At 20°C maximum adjustment, without dynamic expansive force proportional to chain speed.

NB Ultra Violet resistant Roll-Rings® have different mechanical properties to the standard Roll-Ring® which could result in a lower service life.

The above information is based on current knowledge and experience, we reserve the right to make modifications as part of our technical product improvement programme. Registered trademark 641 683 from Ebert Kettenspanick GmbH. The range of ROLL-RING® products continues to increase. Please consult Renold to discuss your particular requirements.

Renold chain reference

Maximum static expansive force ** (Newtons)

Maximum chain speed

Maximum ambient temperature ~ (°C)

Resistant to ultra violet light

(M/S)

Minimum ambient temperature ~ (°C)

110500 110038 110038 110046 110046 110046 111044 \ 6 110056 110056 110056 110066 110066 110066 110088 110088 110106

2.900 15.200 28.500 15.700 22.000 22.000 16.800 28.200 23.000 45.100 39.200 65.000 70.500 95.700 108.500 194.000

5.000 5.200 5.200 7.500 8.600 8.800 7.500 4.200 8.800 8.800 5.400 6.200 6.400 5.700 6.200 7.000

-20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20

70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 60

Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal

129033 119043 119043 119040 119053 119053 119053 119063 119063 119083 119083 119103

5.700 15.200 22.000 16.800 28.200 23.000 45.100 39.200 65.000 95.700 103.000 194.000

5.200 7.500 8.600 7.500 4.200 8.800 8.800 5.400 6.200 5.700 6.600 7.000

-20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20

70 70 70 70 70 70 70 70 70 70 70 60

Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal Normal

110046 110046 111044 \ 6 110056 110066 110066 110088 110106

13.500 20.400 15.400 20.000 37.000 52.000 100.600 165.800

7.100 7.400 6.800 7.800 5.000 5.600 5.800 6.300

-20 -20 -20 -20 -20 -20 -20 -15

70 70 70 70 70 70 70 60

High # High # High # High # High # High # High # High #

Industries Typical applications:

• • • • • • • •

Agricultural machinery Baggage handling Cardboard manufacture Chocolate manufacture Ground compression machines Kiln conveyors Manufacture of drive systems Manufacture of pressing plants

• • • • • • • •

Paper cutting machines Printing machines Road building machines Robotics Roller drive systems Tile manufacture Transport systems Wood chip conveying

Renold Transmission Chain Catalogue

I 67

Transmission Sprocket Details

Sprocket Split Sprocket

Up to 29T

Necklace Sprocket

Renold manufacture a comprehensive range of stock sprockets for British Standard chain up to two inch pitch. Other sizes of sprocket, including those to American Standard dimensions, are available on request. Special sprockets are also manufactured on request, in special materials or formats, normally to suit a specific application in harsh or difficult drive situations, examples being:

• • • •

Sprockets incorporating shafts Welded or detachable hubs Shear pin devices fitted Necklace sprockets made up of chain plates and individual tooth sections for turning large drums or tables

• Combination sprockets (two or more sprockets combined having different pitch sizes and numbers of teeth)

• Sprockets in two or more sections, i.e. split sprockets or segmental sprockets

30T and Over

Smooth Running

EN8 or EN9

Cast Iron

Moderate Shocks

Heavy Shocks

EN8 or EN9 Hardened & Tempered or Case Hardened Mild Steel

Mild Steel or Meehanite

Minimum six teeth

EN8 or EN9 Hardened & Tempered or Case Hardened Mild Steel

Selection of sprocket materials Choice of material and heat treatment will depend upon shape, diameter and mass of the sprocket. The table above can be used as a simple guide on the correct selection of sprocket material.

It is good practice to have the sum of teeth not less than 50 where both the driver and driven sprockets are operated by the same chain, e.g. on a 1:1 ratio drive, both sprockets should have 25 teeth each. Centre distance

Sprocket and chain compatibility Most drives have an even number of pitches in the chain and by using a driver sprocket with an odd number of teeth, uniform wear distribution over both chain and sprocket teeth is ensured. Even numbers of teeth for both the driver and driven sprockets can be used, but wear distribution on both the sprocket teeth and chain is poor. Number of teeth The maximum number of teeth in any driven sprocket should not exceed 114. This limitation is due to the fact that for a given elongation of chain due to wear, the working pitch diameter of the chain on the sprocket increases in relation to the nominal pitch diameter, i.e. the chain assumes a higher position on the sprocket tooth. The allowable safe chain wear is considered to be in the order of 2% elongation over nominal length. A simple formula for determining how much chain elongation a sprocket can accommodate is 200 N expressed as a percentage where N is the number of teeth on the largest sprocket in the drive system.

For optimum wear life, centre distance between two sprockets should normally be within the range 30 to 50 times the chain pitch. On drive proposals with centre distances below 30 pitches or greater than 2m, we would recommend that the drive details are discussed with our technical staff. The minimum centre distance is sometimes governed by the amount of chain lap on the driver sprocket, our normal recommendation in this circumstance being not less than six teeth in engagement with the chain. The centre distance is also governed by the desirability of using a chain with an even number of pitches to avoid the use of a cranked link, a practice that is not recommended except in special circumstances. For a drive in the horizontal plane, the shortest centre distance possible should be used consistent with recommended chain lap (minimum six teeth) on the driver sprocket.

Section 1

Sprockets for Roller Chain

I Renold Transmission Chain Catalogue

Transmission Sprockets Section 1

ISO 606 [9.525mm/0.375â€? Pitch] Tooth Width SIMPLEX Tooth Width Tooth Width DUPLEX Tooth Width TRIPLEX

B1 - 5.3mm b1 - 5.2mm B2 - 15.4mm B3 - 25.6mm

Key Steel Cast Iron

Technical Details (mm) No. of Teeth

PCD

Top Diam.

Simplex Part No.

Duplex Bore

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0

14.0 16.0 16.0 20.0 22.0 22.0 25.0 25.0 28.0 30.0 32.0 32.0 38.0 38.0 38.0 38.0 38.0 35.0 42.0

22.0 25.0 28.0 31.0 34.0 37.0 40.0 43.0 45.0 46.0 48.0 50.0 52.0 54.0 57.0 60.0 60.0 60.0 70.0

25.0 25.0 25.0 25.0 25.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 30.0

19.0 19.0 24.0 24.0 24.0

45.0 45.0 50.0 50.0 50.0

80.0 80.0 90.0 90.0 90.0

25.0 25.0 25.0 38.0 45.0

Part No.

Triplex Bore

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0

14.0 16.0 16.0 20.0 22.0 25.0 28.0 30.0 35.0 42.0 42.0 42.0 40.0 50.0

22.0 25.0 28.0 31.0 34.0 40.0 46.0 49.0 52.0 58.0 64.0 70.0 79.0 90.0

30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0

24.0 24.0 28.0 28.0 35.0

50.0 50.0 55.0 55.0 65.0

90.0 90.0 95.0 95.0 110.0

25.0 25.0 38.0 38.0 52.0

Part No.

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0

14.0 16.0 16.0 22.0 22.0 25.0 28.0 30.0 35.0 42.0 42.0 42.0 45.0 55.0

22.0 25.0 28.0 31.0 34.0 40.0 46.0 49.0 52.0 58.0 64.0 70.0 79.0 90.0

35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 40.0 40.0 40.0 40.0 40.0

28.0 28.0 28.0 28.0 -

55.0 65.0 65.0 65.0 -

95.0 110.0 110.0 110.0 -

38.0 45.0 45.0 52.0 -

Plain Bore - steel C

A 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 30 38

33.80 36.80 39.80 42.80 45.81 48.82 51.83 54.85 57.87 60.89 63.91 66.93 69.95 72.97 76.00 79.02 82.04 91.12 115.34

37.5 40.5 43.5 46.5 49.5 52.5 55.5 58.6 61.6 64.6 67.6 70.6 73.7 76.7 79.7 82.7 85.7 94.8 119.0

06B1/11T 06B1/12T 06B1/13T 06B1/14T 06B1/15T 06B1/16T 06B1/17T 06B1/18T 06B1/19T 06B1/20T 06B1/21T 06B1/22T 06B1/23T 06B1/24T 06B1/25T 06B1/26T 06B1/27T 06B1/30T 06B1/38T

06B2/11T 06B2/12T 06B2/13T 06B2/14T 06B2/15T 06B2/17T 06B2/19T 06B2/20T 06B2/21T 06B2/23T 06B2/25T 06B2/27T 06B2/30T 06B2/38T

06B3/11T 06B3/12T 06B3/13T 06B3/14T 06B3/15T 06B3/17T 06B3/19T 06B3/20T 06B3/21T 06B3/23T 06B3/25T 06B3/27T 06B3/30T 06B3/38T

Plain bore - heavy duty cast iron 57 76 95 114 150

172.94 230.49 288.08 345.68 454.81

177.5 235.1 292.7 350.3 461.2

Technical Details (mm) No. of Teeth

PCD

Top Diam.

06B1/57T 06B1/76T 06B1/95T 06B1/114T 06B1/150T Simplex Part No.

06B2/57T 06B2/76T 06B2/95T 06B2/114T 06B2/150T Duplex

Taper Bush

Boss Diam.

Dist. Thro.

MIN

MAX

Part No.

06B3/57T 06B3/76T 06B3/95T 06B3/114T Triplex

Taper Bush

Boss Diam.

Dist. Thro.

MIN

MAX

Part No.

Taper Bush

Boss Diam.

Dist. Thro.

MIN

MAX

Taper bore - steel A 17 19 21 23 25 38

51.83 57.87 63.91 69.95 76.00 115.34

C 55.5 61.6 67.6 73.7 79.7 119.0

T06B1/17T T06B1/19T T06B1/21T T06B1/23T T06B1/25T T06B1/38T

TB1008 TB1008 TB1008 TB1210 TB1210 TB1210

45.0 45.0 46.0 63.0 63.0 70.0

22.0 22.0 22.0 25.0 25.0 25.0

80.0 80.0 90.0 90.0

25.0 25.0 25.0 38.0

T06B2/17T T06B2/19T T06B2/21T T06B2/23T T06B2/25T T06B2/38T

TB1008 TB1008 TB1008 TB1210 TB1210 TB1610

41.0 46.0 49.0 59.0 64.0 80.0

22.0 22.0 22.0 25.0 25.0 25.0

90.0 90.0 95.0 95.0

25.0 25.0 38.0 38.0

T06B3/17T T06B3/19T T06B3/21T T06B3/23T T06B3/25T T06B3/38T

TB1008 TB1008 TB1008 TB1210 TB1210 TB1615

90.0

25.6 25.6 25.6 25.6 25.6 38.0

95.0 110.0 -

38.0 45.0 -

Taper bore - heavy duty cast iron

57 76 95 114

172.94 230.49 288.08 345.68

177.5 235.1 292.7 350.3

T06B1/57T T06B1/76T T06B1/95T T06B1/114T

TB1210 TB1210 TB1210 TB1615

Rebore, keyway and setscrew modification service available - see page 75

T06B2/57T T06B2/76T T06B2/95T T06B2/114T

TB1610 TB1610 TB1615 TB1615

T06B3/57T T06B3/76T -

TB1615 TB2017

Renold Transmission Chain Catalogue

I 69

Transmission Sprockets

Tooth Width SIMPLEX Tooth Width Tooth Width DUPLEX Tooth Width TRIPLEX

Section 1

ISO 606 [12.7mm/0.500â€? Pitch] B1 - 7.2mm b1 - 7.1mm B2 - 21.0mm B3 - 34.9mm

Key Steel Cast Iron

Technical Details (mm) No. of Teeth

PCD

Top Diam.

Duplex

Simplex Part No.

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

Part No.

Triplex Bore

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

Part No.

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

Plain Bore - steel A 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 30 38

45.07 49.07 53.07 57.07 61.09 65.10 69.11 73.14 77.16 81.18 85.22 89.24 93.27 97.29 101.33 105.36 109.40 121.50 153.80

C 49.9 53.9 57.9 61.9 65.9 69.9 74.0 78.0 82.0 86.0 90.1 94.1 98.1 102.1 106.2 110.2 114.2 126.3 158.6

08B1/11T 08B1/12T 08B1/13T 08B1/14T 08B1/15T 08B1/16T 08B1/17T 08B1/18T 08B1/19T 08B1/20T 08B1/21T 08B1/22T 08B1/23T 08B1/24T 08B1/25T 08B1/26T 08B1/27T 08B1/30T 08B1/38T

10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0

19.0 22.0 25.0 25.0 32.0 33.0 35.0 35.0 40.0 42.0 45.0 45.0 45.0 45.0 45.0 45.0 45.0 48.0 60.0

29.0 33.0 37.0 41.0 45.0 50.0 52.0 56.0 60.0 64.0 68.0 70.0 70.0 70.0 70.0 70.0 70.0 80.0 90.0

25.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 30.0 30.0 30.0 35.0

19.0 19.0 24.0 34.0

60.0 60.0 50.0 50.0

110.0 110.0 90.0 90.0

32.0 32.0 45.0 45.0

08B2/11T 08B2/12T 08B2/13T 08B2/14T 08B2/15T 08B2/17T 08B2/19T 08B2/20T 08B2/21T 08B2/23T 08B2/25T 08B2/27T 08B2/30T 08B2/38T

12.0 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 20.0

20.0 22.0 25.0 28.0 32.0 38.0 42.0 42.0 45.0 45.0 48.0 58.0 60.0 60.0

32.0 35.0 38.0 42.0 46.0 54.0 62.0 66.0 70.0 70.0 80.0 85.0 100.0 100.0

35.0 35.0 35.0 35.0 35.0 38.0 38.0 38.0 40.0 40.0 40.0 40.0 40.0 40.0

28.0 38.0 38.0 38.0

65.0 65.0 65.0 65.0

110.0 110.0 110.0 110.0

32.0 45.0 52.0 58.0

08B3/11T 08B3/12T 08B3/13T 08B3/14T 08B3/15T 08B3/17T 08B3/19T 08B3/20T 08B3/21T 08B3/23T 08B3/25T 08B3/27T 08B3/30T 08B3/38T

16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 20.0 20.0 25.0

20.0 22.0 25.0 28.0 32.0 38.0 42.0 42.0 45.0 45.0 48.0 58.0 60.0 72.0

32.0 35.0 38.0 42.0 46.0 54.0 62.0 66.0 70.0 70.0 80.0 85.0 100.0 120.0

50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 55.0 55.0 55.0 55.0 55.0 55.0

28.0 38.0 38.0 38.0

65.0 75.0 75.0 75.0

110.0 130.0 130.0 130.0

45.0 64.0 64.0 72.0

Plain bore - heavy duty cast iron 57 76 95 114

230.54 307.33 384.11 460.90

237.1 313.9 390.7 467.4

Technical Details (mm) No. of Teeth

PCD

Top Diam.

08B1/57T 08B1/76T 08B1/95T 08B1/114T Simplex Part No.

08B2/57T 08B2/76T 08B2/95T 08B2/114T Duplex

Taper Bush

Boss Diam.

Dist. Thro.

MIN

MAX

Part No.

08B3/57T 08B3/76T 08B3/95T 08B3/114T Triplex

Taper Bush

Boss Diam.

Dist. Thro.

MIN

MAX

Part No.

Taper Bush

Boss Diam.

Dist. Thro.

MIN

MAX

Taper bore - steel A 15 17 19 21 23 25

61.08 69.12 77.16 85.21 93.27 101.33

C 65.9 74.0 82.0 90.1 98.1 106.2

T08B1/15T T08B1/17T T08B1/19T T08B1/21T T08B1/23T T08B1/25T

TB1008 TB1210 TB1210 TB1610 TB1610 TB1610

45.0 60.0 63.0 71.0 76.0 76.0

22.0 25.0 25.0 25.0 25.0 25.0

90.0 110.0 110.0 110.0 110.0

32.0 32.0 32.0 32.0 32.0

T08B2/15T T08B2/17T T08B2/19T T08B2/21T T08B2/23T T08B2/25T

TB1008 TB1210 TB1210 TB1610 TB1610 TB2012

48.0 56.0 64.0 71.0 79.0 87.0

22.0 25.0 25.0 25.0 25.0 32.0

100.0 110.0 110.0 110.0 125.0

32.0 32.0 32.0 32.0 45.0

T08B3/19T T08B3/21T T08B3/23T T08B3/25T

TB1215 TB1615 TB1615 TB2017

62.0 70.0 70.0 -

38.0 38.0 38.0 34.9

110.0 130.0 -

34.9 45.0 64.0 -

Taper bore - heavy duty cast iron

38 57 76 95 114

153.79 230.54 307.33 384.11 460.90

158.6 237.1 313.9 390.7 467.4

T08B1/38T T08B1/57T T08B1/76T T08B1/95T T08B1/114T

TB2012 TB2012 TB2012 TB2012 TB2017

Rebore, keyway and setscrew modification service available - see page 75

T08B2/38T T08B2/57T T08B2/76T T08B2/95T T08B2/114T

TB2012 TB2012 TB2012 TB2012 TB2517

T08B3/38T T08B3/57T T08B3/76T -

TB2017 TB2017 TB2525 -

I Renold Transmission Chain Catalogue

Transmission Sprockets Section 1

ISO 606 [15.875mm/0.625â€? Pitch] Tooth Width SIMPLEX Tooth Width Tooth Width DUPLEX Tooth Width TRIPLEX

B1 - 9.2mm b1 - 9.0mm B2 - 25.6mm B3 - 42.2mm

Key Steel Cast Iron

Technical Details (mm) No. of Teeth

PCD

Top Diam.

Simplex Part No.

Duplex Bore

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

12.0 12.0 12.0 12.0 12.0 12.0 12.0 14.0 14.0 14.0 16.0 16.0 16.0 16.0 16.0 20.0 20.0 20.0 20.0

25.0 28.0 30.0 32.0 32.0 36.0 36.0 42.0 42.0 45.0 45.0 48.0 48.0 48.0 48.0 50.0 50.0 55.0 60.0

37.0 42.0 47.0 52.0 57.0 60.0 60.0 70.0 70.0 75.0 75.0 80.0 80.0 80.0 80.0 85.0 85.0 90.0 100.0

30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 35.0 35.0 35.0 35.0

24.0 28.0 28.0 38.0

50.0 50.0 50.0 75.0

90.0 90.0 90.0 130.0

45.0 52.0 58.0 58.0

Part No.

Triplex Bore

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 20.0 -

25.0 28.0 30.0 30.0 36.0 42.0 48.0 50.0 50.0 60.0 65.0 72.0 -

39.0 44.0 49.0 54.0 59.0 69.0 79.0 84.0 85.0 95.0 105.0 120.0 -

40.0 40.0 40.0 40.0 40.0 45.0 45.0 45.0 45.0 45.0 45.0 45.0 -

Part No.

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

Plain Bore - steel C

A 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 30 38

56.34 61.34 66.32 71.34 76.36 81.37 86.39 91.42 96.45 101.49 106.52 111.55 116.58 121.62 126.66 131.70 136.75 151.87 192.24

63.2 68.2 73.2 78.2 83.2 88.3 93.3 98.3 103.3 108.4 113.4 118.4 123.5 128.5 133.6 138.6 143.6 158.8 199.1

10B1/11T 10B1/12T 10B1/13T 10B1/14T 10B1/15T 10B1/16T 10B1/17T 10B1/18T 10B1/19T 10B1/20T 10B1/21T 10B1/22T 10B1/23T 10B1/24T 10B1/25T 10B1/26T 10B1/27T 10B1/30T 10B1/38T

10B2/11T 10B2/12T 10B2/13T 10B2/14T 10B2/15T 10B2/17T 10B2/19T 10B2/20T 10B2/21T 10B2/23T 10B2/25T 10B2/30T -

Plain bore - heavy duty cast iron 57 76 95 114

288.18 384.15 480.14 576.13

296.6 392.5 488.5 584.5

Technical Details (mm) No. of Teeth

PCD

Top Diam.

10B1/57T 10B1/76T 10B1/95T 10B1/114T Simplex Part No.

Duplex

Taper Bush

Boss Diam.

Dist. Thro.

MIN

Part No.

Triplex

Taper Bush

Boss Diam.

Dist. Thro.

MAX

MIN

60.0 71.0 75.0 76.0 76.0 90.0

25.0 25.0 25.0 25.0 25.0 32.0

90.0 110.0 115.0 115.0

32.0 32.0 32.0 45.0

Part No.

Taper Bush

Boss Diam.

Dist. Thro.

MAX

MIN

MAX

Taper bore - steel A 15 17 19 21 23 25

76.36 86.40 96.45 106.51 116.59 126.66

C 83.2 93.3 103.3 113.4 123.5 133.6

T10B1/15T T10B1/17T T10B1/19T T10B1/21T T10B1/23T T10B1/25T

TB1210 TB1610 TB1610 TB1610 TB1610 TB2012

Taper bore - heavy duty cast iron

38 57 76 95

151.87 288.18 384.15 480.14

158.8 296.6 392.5 488.5

T10B1/38T T10B1/57T T10B1/76T T10B1/95T

TB2012 TB2012 TB2012 TB2012

Rebore, keyway and setscrew modification service available - see page 75

Renold Transmission Chain Catalogue

I 71

Transmission Sprockets

Tooth Width SIMPLEX Tooth Width Tooth Width DUPLEX Tooth Width TRIPLEX

Section 1

ISO 606 [19.05mm/0.750â€? Pitch] B1 - 11.1mm b1 - 10.9mm B2 - 30.4mm B3 - 49.8mm

* Welded Hub

Key Steel Cast Iron

Technical Details (mm) No. of Teeth

PCD

Top Diam.

Simplex Part No.

Duplex Bore

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 25.0

30.0 32.0 38.0 42.0 48.0 50.0 53.0 53.0 53.0 53.0 55.0 55.0 55.0 55.0 55.0 55.0 55.0 55.0 60.0

46.0 52.0 58.0 64.0 70.0 75.0 80.0 80.0 80.0 80.0 90.0 90.0 90.0 90.0 90.0 95.0 95.0 95.0 100.0

35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 35.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0

28.0 35.0 38.0

55.0 55.0 65.0

110.0 110.0 110.0

52.0 58.0 64.0

Part No.

Triplex Bore

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

16.0 16.0 16.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 25.0

30.0 32.0 38.0 42.0 48.0 50.0 55.0 60.0 60.0 66.0 72.0 72.0 72.0 72.0

47.0 53.0 59.0 65.0 71.0 83.0 95.0 100.0 100.0 110.0 120.0 120.0 120.0 120.0

50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0

38.0 48.0 55.0

65.0 90.0 90.0

115.0 155.0 155.0

64.0 76.0 76.0

Part No.

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 25.0 25.0 25.0 25.0 25.0 25.0

30.0 32.0 38.0 42.0 48.0 50.0 55.0 60.0 60.0 66.0 72.0 72.0 72.0 78.0

47.0 53.0 59.0 65.0 71.0 83.0 95.0 100.0 100.0 110.0 120.0 120.0 120.0 130.0

70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0

48.0 55.0 38.0

90.0 90.0 100.0

160.0 165.0 172.0

76.0 76.0 76.0

Plain Bore - steel C

A 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 30 38

67.62 73.60 79.59 85.61 91.63 97.65 103.67 109.71 115.74 121.78 127.82 133.86 139.90 145.94 152.00 158.04 164.09 182.25 230.69

75.8 81.8 87.8 93.8 99.8 105.8 111.9 117.9 123.9 130.0 136.1 142.1 148.1 154.1 160.2 166.2 172.3 190.4 238.9

12B1/11T 12B1/12T 12B1/13T 12B1/14T 12B1/15T 12B1/16T 12B1/17T 12B1/18T 12B1/19T 12B1/20T 12B1/21T 12B1/22T 12B1/23T 12B1/24T 12B1/25T 12B1/26T 12B1/27T 12B1/30T 12B1/38T

12B2/11T 12B2/12T 12B2/13T 12B2/14T 12B2/15T 12B2/17T 12B2/19T 12B2/20T 12B2/21T 12B2/23T 12B2/25T 12B2/27T 12B2/30T 12B2/38T*

12B3/11T 12B3/12T 12B3/13T 12B3/14T 12B3/15T 12B3/17T 12B3/19T 12B3/20T 12B3/21T 12B3/23T 12B3/25T 12B3/27T 12B3/30T 12B3/38T*

Plain bore - heavy duty cast iron 57 76 95

345.81 460.98 576.17

355.9 471.1 586.2

Technical Details (mm) No. of Teeth

PCD

Top Diam.

12B1/57T 12B1/76T 12B1/95T Simplex Part No.

12B2/57T 12B2/76T 12B2/95T Duplex

Taper Bush

Boss Diam.

Dist. Thro.

MIN

Part No.

12B3/57T 12B3/76T 12B3/95T Triplex

Taper Bush

Boss Diam.

Dist. Thro.

MAX

MIN

71.0 76.0 90.0 102.0 108.0 108.0

25.0 25.0 32.0 44.0 44.0 44.0

108.0 125.0 130.0

44.0 45.0 45.0

Part No.

Taper Bush

Boss Diam.

Dist. Thro.

MAX

MIN

MAX

72.0 80.0 90.0 107.0 108.0 108.0

38.0 38.0 32.0 44.0 44.0 44.0

140.0 155.0 155.0

51.0 51.0 51.0

Taper bore - steel A 15 17 19 21 23 25

91.63 103.67 115.74 127.82 139.90 152.00

C 99.8 111.9 123.9 136.0 148.1 160.2

12B1/15T 12B1/17T 12B1/19T 12B1/21T 12B1/23T 12B1/25T

TB1610 TB1610 TB2012 TB2517 TB2517 TB2517

12B2/15T 12B2/17T 12B2/19T 12B2/21T 12B2/23T 12B2/25T

TB1615 TB1615 TB2012 TB2517 TB2517 TB2517

12B3/15T 12B3/17T 12B3/19T 12B3/21T 12B3/23T T2B3/25T

TB1615 TB2012 TB2012 TB2517 TB2517 TB2517

49.8 49.8 49.8 49.8 49.8 49.8

140.0 160.0 172.0

51.0 51.0 76.0

Taper bore - heavy duty cast iron

38 76 95

230.69 460.98 576.17

238.9 471.1 586.2

T12B1/38T T12B1/76T T12B1/95T

TB2517 TB2517 TB2517

Rebore, keyway and setscrew modification service available - see page 75

T12B2/38T T12B2/76T T12B2/95T

TB3020 TB3020 TB3020

T12B3/38T T12B3/76T T12B3/95T

TB3020 TB3020 TB3030

I Renold Transmission Chain Catalogue

Transmission Sprockets Section 1

ISO 606 [25.4mm/1.000â€? Pitch] Tooth Width SIMPLEX Tooth Width Tooth Width DUPLEX Tooth Width TRIPLEX

B1 - 16.2mm b1 - 15.8mm B2 - 47.7mm B3 - 79.6mm

* Welded Hub

Key Steel Cast Iron

Technical Details (mm) No. of Teeth

PCD

Top Diam.

Simplex Part No.

Duplex Bore

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

16.0 16.0 16.0 16.0 16.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 25.0

40.0 45.0 50.0 55.0 60.0 60.0 60.0 6000 60.0 60.0 70.0 70.0 70.0 70.0 70.0 75.0 75.0 75.0 75.0

61.0 69.0 78.0 84.0 92.0 100.0 100.0 100.0 100.0 100.0 110.0 110.0 110.0 110.0 110.0 120.0 120.0 120.0 120.0

40.0 40.0 40.0 40.0 40.0 45.0 45.0 45.0 45.0 45.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0

35.0 35.0 48.0 38.0

75.0 75.0 75.0 100.0

130.0 135.0 135.0 172.0

76.0 76.0 90.0 98.0

Part No.

Triplex Bore

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

20.0 20.0 20.0 20.0 20.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

44.0 45.0 50.0 55.0 60.0 72.0 82.0 85.0 85.0 85.0 85.0 85.0 85.0 90.0

64.0 72.0 80.0 88.0 96.0 112.0 128.0 130.0 130.0 130.0 130.0 130.0 130.0 140.0

70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0 70.0

38.0 48.0 48.0 48.0

100.0 100.0 110.0 110.0

178.0 178.0 216.0 203.0

89.0 89.0 102.0 114.0

Part No.

Bore

Boss Diam.

Dist. Thro.

MIN

MAX

25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 30.0 30.0 30.0

44.0 45.0 50.0 55.0 60.0 72.0 82.0 85.0 85.0 85.0 85.0 85.0 85.0 90.0

64.0 72.0 80.0 88.0 96.0 112.0 128.0 130.0 130.0 130.0 130.0 130.0 130.0 140.0

100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0

48.0 55.0 55.0 55.0

110.0 110.0 110.0 125.0

216.0 216.0 216.0 222.0

102.0 102.0 102.0 127.0

Plain Bore - steel C

A 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 30 38

90.14 98.14 106.12 114.15 122.17 130.20 138.22 146.28 154.33 162.38 170.43 178.48 186.53 194.59 202.66 210.72 218.79 243.00 307.59

101.7 109.7 117.7 125.7 133.7 141.8 149.8 157.8 165.9 173.9 182.0 190.1 198.1 206.2 214.2 222.3 230.4 254.6 319.2

16B1/11T 16B1/12T 16B1/13T 16B1/14T 16B1/15T 16B1/16T 16B1/17T 16B1/18T 16B1/19T 16B1/20T 16B1/21T 16B1/22T 16B1/23T 16B1/24T 16B1/25T 16B1/26T 16B1/27T 16B1/30T 16B1/38T*

16B2/11T 16B2/12T 16B2/13T 16B2/14T 16B2/15T 16B2/17T 16B2/19T 16B2/20T 16B2/21T 16B2/23T* 16B2/25T* 16B2/27T* 16B2/30T* 16B2/38T*

16B3/11T 16B3/12T 16B3/13T 16B3/14T 16B3/15T 16B3/17T 16B3/19T 16B3/20T 16B3/21T* 16B3/23T* 16B3/25T* 16B3/27T* 16B3/30T* 16B3/38T*

Plain bore - heavy duty cast iron 57 76 95 114

461.08 614.64 768.22 921.82

474.9 628.4 782.0 935.6

Technical Details (mm) No. of Teeth

PCD

Top Diam.

16B1/57T 16B1/76T 16B1/95T 16B1/114T

Simplex Part No.

16B2/57T 16B2/76T 16B2/95T 16B2/114T

Duplex Taper Bush

Boss Diam.

Dist. Thro.

MIN

Part No.

16B3/57T 16B3/76T 16B3/95T 16B3/114T

Triplex Taper Bush

Boss Diam.

Dist. Thro.

MAX

MIN

76.0 90.0 108.0 110.0 110.0 110.0

38.0 32.0 44.0 44.0 44.0 44.0

155.0 155.0 160.0 160.0

51.0 51.0 51.0 51.0

Part No.

Taper Bush

Boss Diam.

Dist. Thro.

MAX

MIN

MAX

140.0 140.0 140.0

47.7 47.7 47.7 51.0 51.0 51.0

159.0 175.0

79.6 79.6 79.6 89.0 89.0

159.0 178.0 178.0 216.0

76.0 89.0 89.0 102.0

178.0 216.0 216.0 216.0

89.0 102.0 102.0 102.0

Taper bore - steel A 15 17 19 21 23 25

122.17 138.23 154.32 170.42 186.54 202.66

C 133.7 149.8 165.9 182.0 198.1 214.2

T16B1/15T T16B1/17T T16B1/19T T16B1/21T T16B1/23T T16B1/25T

TB1615 TB2012 TB2517 TB2517 TB2517 TB2517

T16B2/15T T16B2/17T T16B2/19T T16B2/21T T16B2/23T T16B2/25T

TB2012 TB2517 TB2517 TB3020 TB3020 TB3020

T16B3/17T T16B3/19T T16B3/21T T16B3/23T T16B3/25T

TB2525 TB3030 TB3030 TB3535 TB3535

Taper bore - heavy duty cast iron

38 57 76 95

307.58 461.08 614.64 768.22

319.2 474.9 628.4 782.0

T16B1/38T T16B1/57T T16B1/76T T16B1/95T

TB3020 TB3020 TB3020 TB3020

Rebore, keyway and setscrew modification service available - see page 75

T16B2/38T T16B2/57T T16B2/76T T16B2/95T

TB3030 TB3535 TB3535 TB4040

T16B3/38T T16B3/57T T16B3/76T T16B3/95T

TB3535 TB4040 TB4040 TB4040

Renold Transmission Chain Catalogue

I 73

Transmission Sprockets

Tooth Width SIMPLEX Tooth Width Tooth Width DUPLEX Tooth Width TRIPLEX

Section 1

ISO606 [31.75mm to 38.10mm/1.25” to 1.5” Pitch] Sprocket Size 1.5” pitch 1.25” pitch B1 - 18.5mm 24.1mm b1 - 18.2mm 23.6mm B2 - 54.6mm 72.0mm B3 - 91.0mm 120.3mm

* Welded Hub

Key Steel Cast Iron

Technical Details (mm) No. of Teeth

PCD

Top Diam.

Duplex

Simplex Part No.

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

Part No.

Triplex Bore

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

Part No.

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

1.25” Plain Bore - steel A 17 19 21 23 25

172.80 192.89 213.03 233.17 253.31

C 190.75 210.26 232.41 252.22 272.03

20B1/17T 20B1/19T 20B1/21T 20B1/23T 20B1/25T

25.0 25.0 30.0 30.0 30.0

85.0 85.0 100.0 100.0 100.0

120.0 120.0 140.0 140.0 140.0

50.0 50.0 55.0 55.0 55.0

20B2/17T 20B2/19T 20B2/21T 20B2/23T 20B2/25T

30.0 30.0 30.0 30.0 30.0

85.0 85.0 100.0 100.0 100.0

120.0 120.0 140.0 140.0 140.0

80.0 80.0 80.0 80.0 80.0

20B2/38T 20B2/57T 20B2/76T

30.0 65.0 70.0

105.0 110.0 125.0

150.0 206.0 224.0

80.0 127.0 140.0

24B2/17T 24B2/19T 24B2/21T 24B2/23T 24B2/25T

30.0 30.0 30.0 30.0 30.0

95.0 95.0 114.0 114.0 114.0

136.0 160.0 160.0 160.0 160.0

100.0 100.0 100.0 100.0 100.0

40.0 80.0 85.0

114.0 140.0 150.0

160.0 254.0 267.0

100.0 152.0 168.0

20B3/17T 20B3/19T 20B3/21T 20B3/23T 20B3/25T

30.0 30.0 30.0 30.0 30.0

85.0 85.0 100.0 100.0 100.0

120.0 120.0 140.0 140.0 140.0

115.0 115.0 115.0 115.0 115.0

20B3/38T 20B3/57T 20B3/76T

30.0 70.0 85.0

105.0 125.0 140.0

150.0 222.0 254.0

115.0 147.0 163.0

24B3/17T 24B3/19T 24B3/21T 24B3/23T 24B3/25T

30.0 30.0 40.0 40.0 40.0

95.0 114.0 114.0 114.0 114.0

136.0 160.0 160.0 160.0 160.0

150.0 150.0 150.0 150.0 150.0

40.0 90.0 100.0

114.0 150.0 170.0

160.0 267.0 297.0

150.0 175.0 193.0

1.25” Plain Bore - heavy duty cast iron A 38 57 76

384.48 576.35 768.30

C 402.08 593.34 784.86

20B1/38T 20B1/57T 20B1/76T

30.0 48.0 55.0

105.0 95.0 100.0

150.0 170.0 178.0

55.0 81.0 89.0

24B1/17T 24B1/19T 24B1/21T 24B1/23T 24B1/25T

25.0 25.0 30.0 30.0 30.0

95.0 95.0 105.0 105.0 105.0

136.0 136.0 150.0 150.0 150.0

55.0 55.0 60.0 60.0 60.0

30.0 60.0 65.0

105.0 110.0 125.0

150.0 196.0 216.0

60.0 122.0 135.0

1.5” Plain Bore - steel A 17 19 21 23 25

207.34 231.47 255.63 279.81 303.99

C 225.55 248.67 276.61 300.23 324.10

1.5” Plain Bore - heavy duty cast iron A 38 57 76

461.37 691.62 921.97

C 479.81 708.91 938.78

24B1/38T 24B1/57T 24B1/76T

Rebore, keyway and setscrew modification service available - see page 75

24B2/38T 24B2/57T 24B2/76T

24B3/38T 24B3/57T 24B3/76T

I Renold Transmission Chain Catalogue

Transmission Sprockets Section 1

ISO606 [44.45mm to 50.8mm/1.75” to 2.0” Pitch]

Tooth Width SIMPLEX Tooth Width Tooth Width DUPLEX Tooth Width TRIPLEX

Sprocket Size 2.0” pitch 1.75” pitch B1 - 29.4 mm 29.4 mm b1 - 28.8 mm 28.8 mm B2 - 88.4 mm 87.4 mm B3 - 148.0 mm 146.0 mm

* Welded Hub

Key Steel Cast Iron

Technical Details (mm) No. of Teeth

PCD

Top Diam.

Duplex

Simplex Part No.

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

Part No.

Triplex Bore

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

Part No.

Bore

MIN

MAX

Boss Diam.

Dist. Thro.

1.75” Plain Bore - steel A 19 21 23 25

270.05 298.25 326.44 354.66

C 292.61 324.36 352.04 379.98

28B1/19T 28B1/21T 28B1/23T 28B1/25T

30.0 30.0 30.0 30.0

114.0 114.0 114.0 114.0

160.0 160.0 160.0 160.0

75.0 75.0 75.0 75.0

28B2/19T 28B2/21T 28B2/23T 28B2/25T

30.0 30.0 30.0 30.0

128.0 128.0 128.0 128.0

180.0 180.0 180.0 180.0

120.0 120.0 120.0 120.0

28B2/38T 28B2/57T 28B2/76T

40.0 100.0 100.0

142.0 150.0 150.0

200.0 267.0 267.0

120.0 165.0 165.0

32B2/19T 32B2/21T 32B2/23T 32B2/25T

40.0 40.0 40.0 40.0

142.0 142.0 142.0 142.0

200.0 200.0 200.0 200.0

120.0 120.0 120.0 120.0

32B2/38T 32B2/57T 32B2/76T

100.0 105.0 120.0

174.0 188.0 202.0

244.0 264.0 284.0

165.0 165.0 178.0

28B3/19T 28B3/21T 28B3/23T 28B3/25T

30.0 40.0 40.0 40.0

128.0 128.0 128.0 128.0

180.0 180.0 180.0 180.0

28B3/38T 28B3/57T 28B3/76T

40.0 105.0 120.0

142.0 188.0 202.0

200.0 264.0 284.0

180.0 165.0 178.0

32B3/19T 32B3/21T 32B3/23T 32B3/25T

40.0 40.0 40.0 40.0

142.0 142.0 142.0 142.0

200.0 200.0 200.0 200.0

180.0 180.0 180.0 180.0

32B3/38T 32B3/57T 32B3/76T

105.0 120.0 130.0

188.0 202.0 232.0

264.0 284.0 325.0

165.0 178.0 191.0

1.75” Plain Bore - heavy duty cast iron A 38 57 76

538.28 806.88 1075.61

C 538.28 829.31 1097.53

28B1/38T 28B1/57T 28B1/76T

30.0 70.0 85.0

128.0 125.0 140.0

180.0 224.0 244.0

75.0 147.0 165.0

32B1/19T 32B1/21T 32B1/23T 32B1/25T

30.0 40.0 40.0 40.0

114.0 128.0 128.0 128.0

160.0 180.0 180.0 180.0

90.0 90.0 90.0 90.0

2.0” Plain Bore - steel A 19 21 23 25

308.64 340.84 373.08 405.31

C 337.82 372.66 404.37 436.12

2.0” Plain Bore - heavy duty cast iron A 38 57 76

615.16 922.17 1229.28

C 644.40 950.47 1275.05

32B1/38T 32B1/57T 32B1/76T

40.0 85.0 100.0

142.0 174.0 190.0

200.0 244.0 267.0

90.0 165.0 165.0

Rebore, keyway and setscrew modification service available - see page 75

Renold Transmission Chain Catalogue

I 75

Transmission Sprockets

Renold large pitch sprockets

Rebore, Keyway and Setscrew modification service

Detailed in this catalogue are SIMPLE, DUPLEX and TRIPLEX sprockets for British Standard Roller Chain up to 1.00" pitch. 1.25" to 2.00" pitch sprockets are available to Renold specifications from stock. For more details contact Renold Chain. Renold also manufacture sprockets of intermediate numbers of teeth to suit single or multi-strand chains.

Catalogued stock sprockets are supplied either taper bored or pilot bored. This pilot bore allows a larger finished bore to standard H8 tolerances to be machined. A bore to H7 tolerance can also be supplied on request. Keyways to imperial or metric specifications and setscrews can also be machined. A rebore, keyway and setscrew modification service is available and further details can be obtained on request.

Special sprockets In addition to this stock range, special design sprockets in normal or special materials can be manufactured to specific requirements.

Taper bushes Taper bushes provide the quickest and simplest means of securing sprockets to a range of both imperial and metric shafts and are designed to give maximum grip.

American (ANSI) standard sprockets Sprockets to suit chain manufactured to ANSI specification B 29.1 are made to order.

Bush No.

Available Bore Sizes - Metric mm

TB1008 TB1210 TB1215 TB1610 TB1615 TB2012 TB2017 TB2517 TB2525 TB3020 TB3030 TB3535 TB4040

9 11 11 14 14 14 18 16 19 25 35 35 40

Bush No.

Available Bore Sizes - Imperial Inch

TB1008 TB1210 TB1215 TB1610 TB1615 TB2012 TB2017 TB2517 TB2525 TB3020 TB3030 TB3535 TB4040

0.375 0.50 0.50 0.50 0.50 0.50 0.75 0.75 1.00 1.250 1.375 1.625 2.00

10 12 12 16 16 16 19 18 20 28 38 38 42

0.437 0.625 0.562 0.625 0.625 0.625 0.812 0.875 1.125 1.375 1.500 1.750 2.125

12 14 14 18 18 18 20 19 22 30 40 40 45

0.50 0.750 0.625 0.750 0.750 0.750 0.875 1.00 1.250 1.50 1.625 1.875 2.250

14 16 16 19 19 19 22 20 24 32 42 42 48

0.625 1.00 0.750 0.875 0.875 0.975 0.937 1.125 1.375 1.625 1.750 2.00 2.375

16 18 18 20 20 20 24 22 25 35 45 45 50

0.750 1.125 0.875 1.00 1.00 1.00 1.00 1.250 1.50 1.750 1.875 2.125 2.50

Section 1

Modifications and Specials

The taper surface to both the bush and sprocket combine to provide a load bearing connection by the lock action of the hardened high tensile screws.

18 19 19 22 22 22 25 24 28 38 48 48 55

19 20 20 24 24 24 28 25 30 40 50 50 60

20 22 22 25 25 25 30 28 32 42 55 55 65

22 24 24 28 28 28 32 30 35 45 60 60 70

24 25 25 30 30 30 35 32 38 48 65 65 75

25 28 28 32 32 32 38 35 40 50 70 70 80

30 30 35 35 35 40 38 42 55 75 75 85

32 32 38 38 38 42 40 45 60

40 40 40 45 42 48 65

42 42 42 48 45 50 70

80 90

85 95

90 100

1.000 1.250 1.00 1.125 1.125 1.125 1.125 1.375 1.625 1.875 2.00 2.250 2.625

1.125 1.250 1.250 1.250 1.250 1.437 1.750 2.00 2.125 2.375 2.750

1.250 1.50 1.375 1.375 1.375 1.50 1.875 2.125 2.250 2.50 2.875

1.625 1.437 1.50 1.437 1.625 2.00 2.250 2.375 2.625 3.00

1.50 1.625 1.50 1.750 2.125 2.375 2.50 2.750 3.125

1.625 1.750 1.625 1.875 2.250 2.50 2.625 2.875 3.250

1.875 1.750 2.00 2.375 2.625 2.750 3.00 3.375

2.00 1.875 2.125 2.500 2.750 2.875 3.125 3.50

When ordering specify both the bush number and bore size required.

44 50 48 55 75

2.00 2.250 2.375 2.500 2.875 3.00 3.00 3.250 3.375 3.50 3.625 3.750 4.00

Our range of taper bushes are fully interchangeable with most other makes of taper bush.

50 60

I Renold Transmission Chain Catalogue

Section 1

Transmission Counterweight Sets

Key 1. 2. 3. 4.

Chain Guide pulley Anchor stud End attachment link

Unlike link chains, roller chains are exempt from annual annealing requirements for this type of application.

Guide pulleys Dimensions (mm) Part No.

Renold Chain No.

Stock Bore

Max Bore

Width Over Flanges

Distance Through Boss

Chain Pitch Diam

Outside Dia

661200 661201* 661202* 661203* 661204*

12.000 12.000 14.000 19.000 30.000

25.000 25.000 32.000 35.000 50.000

23.000 28.000 31.000 38.000 54.000

25.000 32.000 38.000 45.000 64.000

80.140 85.980 105.410 126.370 171.580

89.000 95.000 114.000 140.000 191.000

661201 661202 661203 661204

12.000 14.000 19.000 30.000

25.000 32.000 35.000 50.000

28.000 31.000 38.000 54.000

32.000 38.000 45.000 64.000

85.980 105.410 126.370 171.580

95.000 114.000 140.000 191.000

Standard roller chains 111046 110046 110056 110066 110088 Extended pitch roller chains 113083 113103 113123 113168

* Sprockets can be supplied for use with these chains.

Anchor studs Dimensions (mm) Renold Chain No.

Part No.

Overall Length Max

Thread Length Max

Metric Thread Size

Pin to Shoulder Max

661031 661032 661033 661034 661035

27.000 32.000 41.000 44.000 62.000

16.400 20.000 26.000 26.000 39.000

M8-1.25 M10-1.50 M12-1.75 M16-2.00 M20-2.50

5.720 6.860 7.820 9.140 11.810

661032 661033 661034 661035

32.000 41.000 44.000 62.000

20.000 26.000 26.000 39.000

M10-1.50 M12-1.75 M16-2.00 M20-2.50

6.860 7.820 9.140 11.810

Standard roller chains 111046 110046 110056 110066 110088 Extended pitch roller chains 113083 113103 113123 113168

* Sprockets can be supplied for use with these chains.

End attachment links Dimensions (mm) Renold Chain No.

111046 110046 110056 110066 110088

Part No.

111046/230 110046/230* 111056/230* 111066/230* 111088/230*

Inside Width Min

Pitch Nom

Stud Diam Max

Inner Link Head

Plate Head Max

Clearance

7.600 11.400 13.400 15.700 25.600

19.050 19.050 25.400 31.750 38.100

8.000 8.000 10.000 11.000 16.000

5.800 5.800 6.700 7.800 10.300

17.000 18.300 21.000 26.000 35.400

19.000 24.000 27.000 30.000 42.500

Part No. 230 comprises end attachment link riveted to an inner link (No.4) and is supplied complete. It is secured to chain by means of an outer link (No. 107).

Renold Transmission Chain Catalogue

I 77

Section 1

Transmission Rack Sets

Key 1. 2. 3. 4.

Chain Draw bolt and block Anchor plate Sprocket

Draw bolt and block Dimensions (mm) Renold Chain No

Part No

Metric Thread Size

Overall Length Max

Length Under Head Max

Head Width Max

Base to Chain Centre

Block Thread Length

Metric Thread Size

110046 110056 110066 110088

661410 661411 661412 661413

M08-1.25 M10-1.50 M12-1.75 M16-2.00

63.000 78.000 90.000 126.000

51.000 64.000 73.000 104.000

11.200 13.100 15.500 25.200

5.080 7.100 8.600 11.170

19.600 26.000 26.000 39.000

M12-1.75 M16-2.00 M16-2.00 M20-2.50

Renold Chain No

Part No

Bolt Hole to Chain Pin Nom

Bolt Hole Pitch Nom

Hole Dia Min

Block Depth

Overall Length Max

Block Width

Chain Width Max

110046 110056 110066 110088

661310 661311 661312 661313

12.700 15.900 15.900 25.400

12.700 20.300 20.300 28.000

5.300 8.400 8.400 10.500

12.700 15.900 17.500 22.200

40.000 55.000 58.000 84.000

15.900 22.300 22.300 31.800

11.200 13.100 15.500 25.200

Part No

No. of Teeth

PCD

Top Dia

Bore Min

Bore Max

Boss Dia

Dist' Thro'

77.160 96.450 115.740 154.330

82.000 103.300 123.900 165.900

12 42 16 20

40.000 70.000 53.000 60.000

60.000 70.000 80.000 100.000

28.000 30.000 35.000 45.000

Anchor plate Dimensions (mm)

Sprockets Dimensions (mm) Renold Chain No

110046 110056 110066 110088

212461 213011 213461 214011

See pages 68 - 74 for dimension B1

19 19 19 19

I Renold Transmission Chain Catalogue

Section 1

Roller Chain Guides

Plastic guide rails horizontal Dimensions (mm) Chain ISO No.

Part No.

06B-1 08B-1 08B-1 10B-1 10B-1 12B-1 12B-1 16B-1 16B-1 20B-1 24B-1

T1 021 510 T1 052 010 T1 052 015 T1 072 010 T1 072 015 T1 082 515 T1 082 520 T1 094 015 T1 094 020 T1 104 515 T1 116 015

15.000 20.000 20.000 20.000 20.000 25.000 25.000 40.000 40.000 45.000 60.000

10.000 10.000 15.000 10.000 15.000 15.000 20.000 15.000 20.000 15.000 15.000

5.500 7.500 7.500 9.300 9.300 11.300 11.300 16.500 16.500 19.000 24.700

1.500 2.200 2.200 2.600 2.600 2.400 2.400 3.500 3.500 4.200 5.500

Plastic Guide Rails Horizontal - T-Profile

Plastic guide rails steel reinforced horizontal Dimensions (mm) Chain ISO No.

Part No.

08B-1 08B-1 10B-1 12B-1 12B-1 16B-1 20B-1 24B-1

CT 4/1 CT 6/2 CT 8/2 CT 9/2 CT 10/3 CT 11/3 CT 12/3 CT 13/5

20.000 17.000 17.000 20.000 23.500 23.500 28.000 33.000

9.000 12.000 12.000 12.000 12.000 12.000 12.000 25.000

7.500 7.500 9.300 11.300 11.300 16.500 19.000 24.700

2.200 2.200 2.600 2.400 2.400 3.500 4.300 5.500

11.000 17.000 17.000 17.000 18.000 18.000 18.000 30.000

Plastic Guide Rails Steel Reinforced Horizontal

Plastic guide rails steel reinforced vertical Dimensions (mm) Chain ISO No.

06B-1 08B-1 10B-1 12B-1 16B-1 20B-1

Part No.

CGK 1/6 CGK 5/6 CGK 7/6 CGK 8/6 CGK 9/9 CGK 10/9

24.000 24.000 24.000 24.000 40.000 40.000

30.000 30.000 30.000 30.000 45.000 45.000

8.700 11.500 13.500 15.900 25.000 28.000

6.600 8.700 10.400 12.300 16.100 19.300

Plastic Guide Rails Steel Reinforced Vertical

Renold Transmission Chain Catalogue

I 79

Section 1

Rivet Extractors and Chain Lubricant

For chain breaking Screw operated extractors break chain by forcing the Renold end softened bearing pins out of the outer link plates. For other brands of chain the rivet swell must first be ground away.

Part No. 10101 For use with chains: 9.525 mm/0.375" to 15.875 mm/0.625". BS and ANSI Series.

Part No. 10102 For use with chains: 19.05 mm/0.75" to 31.75 mm/1.25" BS Series. 19.05 mm/0.75" to 25.4 mm/1" ANSI Series.

Chain lubricant Renold Chain Lubricant has been specially formulated to ensure positive lubrication and protection to all working surfaces of the chain drive. It is fast penetrating, does not drip or fling, and is ideal for quick and easy application, particularly on open chain drives where normal lubrication is not possible.

• Fast positive penetration • Does not drip or drain away • Resists centrifugal flinging • Longer chain life Part No. 611124 For use on 'open' chain drives.

I Renold Transmission Chain Catalogue

Section 2 Industry Applications

Renold Transmission Chain Catalogue

I 81

Special Engineered Chain

NO RE

Aircraft chain

Can manufacture

Escalator drive chain

• 8mm to 12.7mm pitch • Conforms to BAe spec.

• 9.05mm and 25.4mm pitch chain.

• 584107 • 25.4mm pitch • Breaking load 129.4 kN.

Renold aircraft chain provides a flexible connection for use in control systems and other operating gear, including the transmission of power, where a positive tension is required.

Standard and hollow bearing pin transmission chain fitted with plastic tipped, extended bearing pins used for transporting freshly painted cans through drying ovens. Special high temperature lubricant available on this product.

Two strands of matched chain connected by extended bearing pins and fitted with plastic rollers for silent drives in escalators.

Marine diesel chain

Pipe wrench chain - oil industry

Polythene film production

• 110245, 110281, 110325 and 110366.

• 586 927 • 31.75mm pitch.

• 6.35mm to 38.1mm pitch.

The oil industry use a pipe wrench chain system to assemble 'Down Hole Pipes'.

Sharpened spiked shaped attachments pierce the polythene and pulls it through various production processes.

Quarry chain - for rock drilling

Sheet metal handling

Small component manufacture

• ANSI HV series 50.8mm pitch.

• 19.05mm pitch and 25.4mm pitch chain.

• 8mm, 12.7mm and 15.8mm pitch chain.

Face rock drilling machines with six chain driven heads are used to drill holes for explosive charges.

'Bent-claw' attachments hold square rods which support steel sheets through printing and drying processes.

A typical V-shaped attachment plate used to locate small electrical components such as resistors and capacitors, through various production processes. The chains generally run in pairs with plates formed to suit specific products.

Matched in sets of two or three strands acting as timing chains within large marine diesel engines.

Section 2

I Renold Transmission Chain Catalogue

Section 2

Aircraft Chain

Quality

Operating gear

Durability and strength

Renold has manufactured and supplied chain for all types of aircraft for about 100 years and the company has been able to issue inspection certificates since 1927. Renold is an approved supplier to British Aerospace (Approval No. BAe/AG/3049/CHD).

• Cowl gill

Our specification of specially selected steels enhanced by our own heat treatment, apart from providing the highest load/weight ratio, ensures minimum chain wear in service and the ability to withstand the most arduous flying conditions.

The technical guidance notes detailed in this catalogue should be read in conjunction with the current requirements of the above mentioned and other similar authorities.

• Cockpit hood • Door operation • Fire interrupter • Fuel valve • Flight refuelling systems • Engine nozzle rotation • Landing flaps • Loading hoists

Function Chain provides a flexible connection for use in control systems or other applications, including the transmission of power, where positive tension is required. Correct and economical application of chain is, however, largely dependent upon an appreciation of the methods available for effecting connection of the chain to other parts of the system. When standard Renold chain and non-reversible chain are used in conjunction with the appropriate sprockets, guards and connectors, they make incorrect assembly impossible. With the development of new aircraft, applications for chain are continuously increasing. Our technical staff are at the disposal of design engineers and manufacturers for collaboration in the application of chain for aircraft use. Typical applications within the industry are: Controls • Ailerons • Aileron trimming tabs • Control columns • Elevators • Elevator trimming tabs • Engine • Propeller pitch • Rudder • Rudder trimming tabs

Precision manufacturing techniques, coupled with our proven chain specification, provides a positive, smooth and uniform action. The resilience of chain is also a safeguard against shock loading.

• Radiator shutter

Benefits

• Seat adjustment

• Quality/certification • BAe Approved

Specification

• Reliability

Adaptability

• Durability

The adaptability of chain makes it ideal for control runs. Changes in directions are readily made by the use of guide pulleys or sprockets. By the inclusion of bi-planar blocks, changes in the plane of motion through 90 degrees can be made.

• Safety • Flexibility • A Proven Track Record • Experience

Renold Transmission Chain Catalogue

I 83

Aircraft Chain

Gearing dimensions

Section 2

A simple roller chain has three principal dimensions (detailed in diagram one) by which it can be identified. These dimensions, referred to as the gearing dimensions, since they are related to the sizes of the sprockets on which the chain will run, are the PITCH, the WIDTH BETWEEN THE INNER PLATES and the ROLLER DIAMETER.

Component parts The component parts of an outer link and an inner link of a simple roller chain are illustrated in diagram two to demonstrate the method of chain construction.

Attachment links The various types of attachment link used for attaching components to an aircraft chain are shown in diagram three. Attachments, customer free issue or Renold supplied, should be assembled into the chain by Renold before proof loading takes place. Outer link Assembled and riveted into the chain when connecting an attachment. Never dismantle and re-assemble. End connecting link Assembled into the chain by Renold. Bolt only may be disconnected. Non-reversible chain The component parts of non-reversible chain shown in diagram four are similar to simple chain with the exception of the special outer plates assembled into the chain at four pitch spacing.

I Renold Transmission Chain Catalogue

Chocolate Industry Chain

Section 2

Renold supplies a comprehensive range of chain to meet the demands of manufacturing confectionary products. Environmental requirements such as hygiene are catered for as well as considerations such as corrosion and wear resistance.

We donâ€™t just provide products that make a difference; you get the best services from Renold too!

At every stage of the process Renold provides exactly what you need. Precision in our chain ensures accurate indexing of moulds along a production line, minimising waste chocolate.

Mould heater

Section 4

Standard and non-standard attachments are available to suit your needs. Renold has the experience to provide products and support to keep your high volume production lines operational.

Mould shaker

Chocolate depositor

Cooler

Mould inversion

Demoulder

Backing depositor

Packaging

Renold Transmission Chain Catalogue

I 85

Food Industry Chain

Renold offers the most comprehensive range of chain products designed for the food industry and works with many of the leading international brand names that we encounter every day. Chain aimed at reducing maintenance, delivering high levels of resistance to wear, fatigue and corrosion and keeping your production levels at their highest; that’s our speciality!

Section 2

One of the largest and most diverse industries imaginable, the processing, manufacturing and packaging of the world’s food products delivers challenges to engineers looking to meet tough productivity targets. This requires first class technical support and the right product for the job.

Renold has options, whatever your application environment!

Conditions

The Chain Solution

Washdown

Syno PB Stainless steel chain

Hydro-Service chain Nickel plated chain Polymer bushed conveyor chain

Corrosive conditions - Mild (pH between 5 and 7)

Syno NP 3 4 Stainless Steel 1 3 4 5 Steriliser chain 1 3 4 5

Polymer bushed conveyor chain 3 4 Hydro-Service chain 3 Nickel Plated 3 4

Corrosive conditions - High (pH below 5 and above 7; temperatures above 60°c)

Nickel Plated

Stainless Steel 2

Cannot lubricate

Syno NP

Syno PB

Direct contact with food

Stainless steel

High shock loads

Standard roller chain Standard conveyor chain

Engineering class chain

Heavy loads

Standard conveyor chain

Renold Synergy

Temperature: Hot or Cold (Between -40°C and 180°C. Above 180°C special lubrication would be required)

Stainless steel Steriliser chain

Standard conveyor chain Engineering class chain

High humidity

Stainless steel Hydro-Service

Steriliser chain

High speed

Standard roller chain Double Pitch roller chain

Can feeder chain

Vertical system

Standard roller chain

Engineering class chain

Indexing / moulding applications

Standard roller chain

Apron chain

High Abrasion

Sovereign

1 = Suitable for temperatures over 60oC (stainless steel and steriliser chain) 2 = Suitable for highly corrosive conditions of more than 60oC (stainless steel) 3 = Suitable for environments associated with general corrosion

4 = Suitable for environments associated with pitting or crevice corrosion such as salt water, moderately high temperatures or a pH of 3 - 5 5 = Suitable for environments associated with galvanic corrosion

I Renold Transmission Chain Catalogue

Section 2

Marine Diesel Chain

In one of the toughest and potentially most remote applications there is, chain is required to keep a ship's engine operational with a high resistance to wear and fatigue, which is where the expertise and design specification of a Renold chain comes into play.

Renold manufactures chain not only for large vessels but also engines for small and medium sized engines too.

Running at high speeds and with safety factors in mind, Renold manufactures chain specifically for marine diesel engines. The large pitch sizes, listed below, are matched prior to despatch to ensure optimum performance.

â€˘ Wear and fatigue resistance is a Renold strength

Renold design experience â€˘ Specification makes safety a priority

â€˘ Chain manufactured specifically for the application

Renold Transmission Chain Catalogue

I 87

Ports & Container Handling Chain

Factors of safety are critical when large payloads are being transported and Renold understands the importance of ensuring long working life based on product integrity. • ANSI standard large pitch roller chain • Differing specifications to suit application • Wide range of leaf chain sizes • Galle chain also available

Section 2

Renold supplies a wide range of chain for lifting applications at ports around the world. With a comprehensive range of both roller and leaf chain for lifting machinery running on either wheels or rails, the Renold specification of designing chain to be highly resistant to wear and fatigue delivers lasting performance.

I Renold Transmission Chain Catalogue

Renold Oilfield chain is best because... Renold Oilfield Chain

• Renold's special holing processes for oilfield chain were specifically developed to give improved fatigue resistance while minimising susceptibility to stress corrosion cracking

• Manufactured to API specification 7F-0008 • Proven longer life in offshore environments

Section 2

• Supreme performance at high speed and shock loads

7F-0008

• Bearing pins undergo customised heat treatment and surface finish operations to ensure unsurpassed toughness and wear life

• Excellent return on investment

• Closely controlled tolerances ensure smooth robust running even at high speeds.

Function

• Specially formulated factory lubrication gives substantially better initial wear performance and enhanced corrosion resistance.

Renold oilfield chains are used on: • Mud pump drives • Engine compounds • Tubular and casing draw works input • Transmission drives • Catshafts

Chain types

Duplex chain Standard ANSI B29.1 ISO 606 A

• Detachable chains for ease of fitting and replacement. • All chains are proof loaded before packing in durable containers. • Roll pins optional for extra security.

Quadruplex chain Standard ANSI B29.1 ISO 606 A

• Low and high drum • Rotary countershafts • Rotary tables In fact wherever chains are required in oilfields because reliability is paramount.

Section 4

Key Features • Close control of material specifications to ensure consistent response to heat treatment • Renold's plate profile ensures optimum stress distribution for greater reliability • Fatigue life is enhanced by shot peening and other pre-stressing processes on plates, bushes and rollers

Product Description As standard Renold offer chain: • To API specification 7f-0008 • Fully detachable along its length • Both Split and roll pin options are available on all sizes, although roll pin recommended on quadruplex and above • With slip fit intermediate plates Options available on request include:

Sextuplex chain Standard ANSI B29.1 ISO 606 A

• Split pins/roll pins • Press fit intermediate plates • Special lubrication • Renold ANSI Xtra for particularly arduous conditions • Pipe wrench chain Many common oilfield chains are held in stock at our factories and many outlets worldwide. Octuplex chain Standard ANSI B29.1 ISO 606 A

Pipe wrench chain Special

Renold Transmission Chain Catalogue

I 89

Oilfield Chain Rotary Table Drawworks Catshaft Rotary Countershaft Transmission

Section 2

Mud Pumps

Renold ultimate performance

Renold ultimate reliability

• The performance of our chain is ensured by a programme of continuous testing and quality audits

• The key to the reliability of Renold chain is consistency in design and manufacture

• Breaking loads exceed the minimum international standards

• Renold’s sophisticated quality assurance systems continually monitor and improve our output

• Our specially formulated lubricants reduce initial wear, give corrosion protection and ensure long storage life • Renold chain is highly fatigue resistant giving up to four times the life of other brands • Fatigue life is enhanced by shot peening and other pre-stressing techniques

• For more than 100 years Renold has had a proven track record in demanding, arduous industries

I Renold Transmission Chain Catalogue

Steel Industry Chain

Section 2

Wherever arduous conditions, corrosion and wear occur . . . steelmakers demand Renold Chain

The steel industry covers many varied activities, from raw material processing to finished product handling, each stage having its own particular needs from the power transmission and mechanical handling equipment used.

Cold Reduction Mill

When corrosion, slipping or excessive wear occur on transmission or mechanical handling equipment used on steel processing lines the equipment can quickly take a turn for the worse, resulting in damaged product, expensive maintenance and replacement costs. That's why more and more steelmakers rely on Renold Chain to help their equipment last longer and operate more efficiently. Renold are helping to improve equipment performance and are reducing maintenance requirements right down the line. Wherever the destructive forces of high speed operation exist, from cold reduction mills to hot dip coating lines, steelmakers around the world insist on Renold Chain.

Temper Mill

Slitter Lane

Renold Transmission Chain Catalogue

I 91

Steel Industry Chain

Key Applicational Areas

Accumulator Chain

• Casting • Coil handling • Coil treatment • Sheet handling

Section 2

• Raw material processing • Slab handling • Steel section manufacture/handling • Tube manufacture

Hot Dip Coating Line

Transmission chain for accumulators used on steel works processing lines.

When coils of thin steel plate have been produced it is sometimes required to be coated - painted, galvanised or plastic coated. Obviously, the coating process, whichever type it is, necessitates numerous operations and tight control - especially the speed at which the steel passes through the process area. It is, therefore, necessary that the steel plate being coated passes through the process section at a constant speed and is continuous and uninterrupted.

For this reason it is necessary to accumulate the steel plate before the process area to allow time, say 2 to 3 minutes, so that when the end of the coil is reached a new coil can be positioned and the beginning of the new one welded to the end of the previous one.

I Renold Transmission Chain Catalogue

Skid Steer Vehicle Chain

Section 2

Operating in tough conditions, chain for skid steer vehicles has to be designed to exceed the demands placed upon it. Renold has a wealth of experience supplying chain to manufacturers of these specialist vehicles. The drive systems deliver high loads and stress which means the chain must be able to withstand wear and fatigue for as long as possible, something that has always been at the very heart of Renold chain design. The

sudden shocks caused by rapid changes of direction will soon expose any chain that isn't up to the job. Using simplex chain from the Renold ANSI Xtra range, with thicker side plates and a through-hardened pin, vehicle manufacturers can be sure that they are specifying a product that meets their own high standards. The chain can also be supplied as endless loops so that sprocket centre distance can be adjusted to accommodate the chain.

• Demanding application requires Renold fatigue resistance • Plate and pin specification ideal for shock loadings • Endless loops available • Tough chain for a tough job

Paver Safetymachine warningchain

Health and Safety at work

Guidance notes

Outer Link: for high speed drives or drives operating in arduous conditions a properly riveted outer link (No 107) must always be used for optimum security, in preference to any other form of chain joint. The use of other connectors and cranked links (No 12 and No 30) must always be restricted to light duty, noncritical applications, in drives where an odd number of pitches is absolutely unavoidable. Wherever possible, drives should have sufficient overall adjustment to ensure the use of an even number of pitches throughout the useful life of the chain. A cranked link joint should only be used as a last resort.

In the interests of safety, customers are reminded that when purchasing any technical product for use at work (or otherwise), any additional or up-to-date information and guidance, which it has not been possible to include in the publication, should be obtained by you from your local sales office in relation to the suitability and the safe and proper use of the product. All relevant information and guidance must be passed on by you to the person engaged in, or likely to be affected by or responsible for the use of the product.

Whilst all reasonable care in compiling the information contained in this catalogue is taken, no responsibility is accepted for errors. All information contained in this catalogue is subject to change without notice.

Chain performance The performance levels and tolerances of our product stated in this catalogue (including without limitation, serviceability, wear life, resistance to fatigue, corrosion protection) have been verified in a programme of testing and quality control in accordance with Renold, independent and/or international standard recommendations. No representations or warranties are given that our product shall meet the stated performance levels or tolerances for any given application outside the performance levels and tolerances for the productâ€™s own specific application and environment.

Illustrations - The illustrations used in this catalogue represent the type of product described but the goods supplied may vary in some detail from those illustrated. Specifications - The right is reserved to make modifications to the product to meet manufacturing conditions and/or developments (for example in design or materials). Renold - Product can be supplied by Renold companies or representatives around the world on the standard terms and conditions of sale of the company or representative from which the product is purchased. Copyright - Copyright Renold Power Transmission Limited 2010. All rights reserved. Nothing contained in this publication shall constitute a part of any contract, express or implied.

ERIKS vestigingen Aandrijftechniek

ERIKS Servicecenters

Dordrecht Keerweer 41 3316 KA Dordrecht T (078) 652 21 21 F (078) 652 21 29 E info.dordrecht@eriks.nl

Alkmaar Saffierstraat 3 1812 RM Alkmaar T (072) 514 17 17 F (072) 514 16 25 E esc.alkmaar@eriks.nl

Ede Galvanistraat 34 6716 AE Ede T (0318) 43 96 14 F (0318) 64 01 04 E ede@eriks.nl

Leeuwarden James Wattstraat 19 8912 AS Leeuwarden T (058) 215 05 87 F (058) 215 85 16 E leeuwarden@eriks.nl

Groningen Rouaanstraat 8 9723 CD Groningen T (050) 368 49 49 F (050) 314 62 57 E info.groningen@eriks.nl

Almelo Plesmanweg 12 7602 PE Almelo T (0546) 87 30 70 F (0546) 87 32 68 E almelo@eriks.nl

Eerbeek Loubergweg 19 6961 EJ Eerbeek T (0313) 67 95 00 F (0313) 65 47 68 E eerbeek@eriks.nl

Maastricht Amerikalaan 28 6199 AE Maastricht-Airport T (043) 604 91 80 F (043) 363 87 28 E maastricht@eriks.nl

Leeuwarden James Wattstraat 19 8912 AS Leeuwarden T (058) 294 50 50 F (058) 213 24 71 E info.leeuwarden@eriks.nl

Amsterdam Dynamostraat 46-48 1014 BK Amsterdam-Westpoort T (020) 448 96 10 F (020) 613 77 65 E amsterdam@eriks.nl

Eindhoven De Witbogt 22 a 5652 AG Eindhoven T (040) 291 19 00 F (040) 291 19 09 E eindhoven@eriks.nl

Rijnmond Shannonweg 33, Haven 5079 3197 LG Rotterdam-Botlek T (010) 231 34 00 F (010) 296 96 18 E rijnmond@eriks.nl

Roermond Albert Einsteinweg 8 6045 GX Roermond T (0475) 37 22 33 F (0475) 32 75 40 E info.roermond@eriks.nl

Arnhem Pieter Calandweg 46 6827 BK Arnhem T (026) 362 92 44 F (026) 361 00 63 E arnhem@eriks.nl

Emmen Willem Schoutenstraat 11 b 7825 VV Emmen T (0591) 66 80 00 F (0591) 66 80 06 E emmen@eriks.nl

Roermond Ada Byronweg 11 6045 GM Roermond T (0475) 37 22 70 F (0475) 37 23 05 E roermond@eriks.nl

Rotterdam Sevillaweg 75 3047 AL Rotterdam T (010) 245 50 00 F (010) 262 06 22 E info.rotterdam@eriks.nl

Bergen op Zoom Van Konijnenburgweg 44 b 4612 PL Bergen op Zoom T (0164) 27 55 44 F (0164) 27 55 49 E bergenopzoom@eriks.nl

Hengelo Hassinkweg 16 7556 BV Hengelo T (074) 291 57 57 F (074) 291 59 39 E hengelo@eriks.nl

Tilburg Ellen Pankhurststraat 9 5032 MD Tilburg T (013) 571 45 61 F (013) 570 06 42 E tilburg@eriks.nl

Schoonhoven Broeikweg 25 2871 RM Schoonhoven T (0182) 30 34 56 F (0182) 38 69 20 E info.schoonhoven@eriks.nl

Delfzijl Deltaweg 30 9936 HK Farmsum T (0596) 63 38 20 F (0596) 63 38 29 E delfzijl@eriks.nl

Hoorn De Factorij 35 d 1689 AK Zwaag T (0229) 21 28 82 F (0229) 21 93 74 E hoorn@eriks.nl

Zwolle AmpĂ¨restraat 27 8013 PT Zwolle T (038) 467 29 20 F (038) 467 29 29 E zwolle@eriks.nl

Den Haag / Marofra Neckar 2 2491 BD Den Haag T (070) 381 84 84 F (070) 381 84 36 E denhaag@eriks.nl

Gouda Marconistraat 117 2809 PG Gouda T (0182) 33 11 60 F (0182) 37 82 02 E gouda@eriks.nl

Doetinchem Havenstraat 55 7005 AG Doetinchem T (0314) 34 37 20 F (0314) 34 37 41 E doetinchem@eriks.nl

Groningen Rouaanstraat 8 9723 CD Groningen T (050) 368 49 99 F (050) 368 49 98 E groningen@eriks.nl