Doosan P222FE P222FEII V222TIH V222TIM V222TIL 4V222I 4V222TI 4V222TIH 4V222TIM 4V222TIL Valve adjusting procedure Page 1 of 3 z After letting the #1 cylinder's piston come at the compression top dead center by turning the crankshaft, adjust the valve clearances.
z Loosen the lock nuts of rocker arm adjusting screws and push the feeler gauge of specified value between a rocker arm and a caliper, and then adjust the clearance with adjusting screw respectively and tighten with the lock nut.
z As for the valve clearance, adjust it when in cold, as follows. Intake valve Lash Specifications Exhaust valve Lash Specifications
Model Doosan P222FE P222FEII V222TIH V222TIM V222TIL 4V222I 4V222TI 4V222TIH 4V222TIM 4V222TIL
0.4 mm
0.5 mm
Rocker arm Valve adjusting nut
A Push rod Caliper Cylinder head
Valve spring
Valve
Valve seat
Intake & exhaust valve adjusting
EF8OM020
Doosan Generator Engine Parts contact: Email: EngineParts@HeavyEquipmentRestorationParts.com alternate email: EngineParts2@gmail.com Heavy Equipment Restoration Parts LLC 4730 118th Ave Fennville Michigan 49408 USA Phone: 269 673 1638 Text: 269 760 8652 Website: www.HeavyEquipmentRestorationParts.com