Fulham FC Stadium
Riverside Stand
The newly redeveloped Riverside Stand at Fulham FC represents a landmark in modern stadium design, blending luxury, heritage, and cutting-edge engineering. As part of this project, energystore played a critical role in delivering highperformance insulation that met stringent acoustic requirements without compromising on compliance.
TLA300 was expertly poured to provide exceptional thermal and acoustic performance throughout the stand. This solution ensured that the building’s interior spaces—ranging from hospitality areas to entertainment zones—maintained comfort and sound control to the highest standards.
Project Details
Project Size
8000+ seater stand with integrated hotel and conferencing facilities
Main Contractor Portview
Installer Progressive Group
Product Grade TLA300 Grade
Amount used 4000 m2
“High-strength insulation was a key requirement for the Riverside Stand project at Fulham FC, which is why we went chose energystore TLA300. It allowed us to reduce screed depths while achieving stringent acoustic targets.
TLA300 also provided an A2 fire rating and a seamless insulation layer, delivering both performance and compliance benefits".
Stuart Forbes Managing Director | Stuart Forbes Associates
A2 fire rated
Levelling properties
Thermal performance
Lightweight solution
Faster installation
*Compared to traditional methods
Technical Characteristics
Cement Dosage (kg/m3)
Density after 28 days (kg/m3)
Thermal Conductivity (W/mK)
Compressive Strength (kPa)
Flexural Strength (N/mm2)
Permeability to Water Vapour (μ)
Shrinkage (NBN) (mm/m) Fire
Faster installation compared to traditional methods A2 Fire Rated Insulation Solution energystore TLA® combines eps beads coated in a specially formulated additive with cement and water to create a pourable insulation. This poured insulation offers an A2 fire rated alternative for use in floor and roof construction as a high strength void former or insulation.
No on-site TLA storage or waste.
<0.5% drying shrinkage.
No gaps or breaks in insulation layer that may cause performance issues.
High strength poured insulation
Suitable for flat and sloping roofs
Suitable to apply underfloor heating systems (UFH) directly on top
Suitable for ground bearing and suspended floors