System Solutions for Substations (EN)

SYSTEM SOLUTIONS FOR SUBSTATIONS

CONNECTION MATERIAL

Compression cable lugs acc. to DIN, Cu

6 - 1000 mm2

•For round conductors, e.g. acc. to EN 60228 Cl. 1, 2, 5 and 6

•For non-tension copper cables, e.g. to DIN 48201-1

•For pre-rounded multi-stranded sector shaped conductors

•With code number for clear tool assignment

•Acc. to DIN 46235

Compression cable lugs, special type, Cu with 1 slot, double crimping

2 x 50 - 2 x 120 mm2

•Special design for mounting of 2 multi-stranded cables, e.g. to EN 60228 Cl. 2

•Easy to process due to crimp markings

Compression cable lugs, special type, Cu with 2 slots, double crimping

2 x 50 - 2 x 120 mm2

•Special design for mounting of 2 multi-stranded cables, e.g. acc. to EN 60228 Cl. 2

•Easy to process due to crimp markings

C-type branch clamps, Cu, multi-purpose clamps

• For non-tension copper cables, e.g. acc. to DIN 48201-1

• Ideal for clamping different conductor cross-sections e.g. acc. to EN 60228 Cl. 1 and 2

• No need to cut the main conductor

• Optimum conducting characteristics in combination with grease

C-type branch clamps, Cu

• For non-tension copper cables, e.g. to DIN 48201-1

• Ideal for clamping identical conductor cross-sections e.g. to DIN EN 60228 Cl. 1 and 2

• No need to cut the main conductor

Branch clamps in H-type, Cu

• For non-tension copper cables, e.g. acc. to DIN 48201-1

• Ideal for clamping identical conductor cross-sections e.g. acc. to EN 60228 Cl. 1 and 2

• Lightning protection tested to EN 50164-1

• No need to cut the main conductor

CRIMPING & CUTTING

EKM 60/22

Battery powered hydraulic crimping tool 6 - 300 mm²

• Large crimping range up to 300 mm²

• 22-series interchangeable crimping dies, narrow crimping

ESM 50

Battery powered hydraulic cutting tool 50 mm dia. for copper and aluminium cable

• For cutting copper and aluminium cables (fine-stranded also)

• Saves time with multiple cuts thanks to innovative opening mechanism

• Very low weight (3 kg)

• Optimum center of gravity

ESGM 452

Battery powered hydraulic cutting 45 mm dia.

• For cutting Al/St cables (ACSR), round materials (Cu, Al, St) as well as armoured cables and mass construction steel

• Cutting blades can be replaced without special tools by using a snap lock

• Optimised cutting head

EKM 120/42

Battery powered hydraulic crimping tool 16 - 400 mm²

• C-head with very wide crimping range to 400 mm²

• Up to 60 % fewer crimps thanks to wide crimping in comparison to 6 t tools

• Easy handling by optimum weight distribution

ESG 25

Battery powered hydraulic crimping tool Ø 25 mm

• For cutting Al/St cables (ACSR), round materials (Cu, Al, St) as well as armoured cables, solid structural steel and fine-stranded copper cables

• High-performance cutting characteristics for highly-flexible conductors and wire cables

• Extremely robust design and lightweight

ESM 25

Battery powered hydraulic crimping tool Ø 25 mm

• For cutting Al/St wires (ACSR), round materials (Cu, Al) as well as armoured cables, and stay wires

• Protected cutting mechanism through plastic housing

• Quick-change cutting blades