GS 400 Tool resharpening machine
GS 400 top efficiency and versatility
EMAG SU began producing gear cutting tools in 1949. The need to constantly improve the quality of the produced gears has spurred the development of tool resharpening technology. To fulfil these production needs, from the 60's on EMAG SU has started to design and produce resharpening machines for shaving cutters currently known for their reliability, efficiency and accuracy. The new GS 400 is the 4th generation of this type of machine, setting new standards in accuracy, productivity, reliability, versatility and ease of operation. 2 GS 400
The profile to be ground is calculated by EMAG SU interpolation software which coordinates the linear movement of the workpiece slide with the rotation of its spindle. The rotational-translational movement generated is fully adjustable via software. It allows to obtain the requested involute with any pressure angle placed on the grinding wheel. Rolling and indexing of the workpiece are numerically controlled and both generated by the same axis. Linear motors drive all axes involved in the generation of the profile.
Fully NC controlled process with additional X11 axis An additional NC-controlled axis has been integrated on the work spindle group to move workpieces axially in relation to their own bores. n
Grinding of workpieces with large face widths up to 70 mm, obtaining a correct profile in all points and also along the helix thanks to the sliding X11
axis n Accurate planar positioning of the workpiece by avoiding accumulated errors caused by mechanical spacers n Minimum set-up times thanks to the HMI n Precise location of the exact centre of the workpiece tooth, the point over which the maximum outside diameter of the grinding wheel has to pass n Higher accuracy on both the helix and involute profile n Reduction of runout errors (Fr) n Automatic balancing system (Marposs), with integrated touch sensor for a better management of the dressing and grinding process n Ergonomic cabin ensuring the operator complete safety n Electrowelded, heavily ribbed machine bed filled with polymeric cement for vibration-free operation even at highest stock removal rates n Transducer with 0.1 micron resolution n Low centre of gravity for extreme stability and easier tool handling n Easy and fast workpiece change with quick-change mechanism n Integrated checking unit
A:
Work spindle rotation/indexing
B:
Horizontal work slide movement
X:
Dresser radial stroke
Z:
Dresser axial stroke
Y:
Vertical work slide movement
U:
Pressure angle adjustment
V:
Helix angle adjustment
S:
Grinding spindle rotation
X11: Work spindle feed axis
GS 400 3
Integrated checking Integrated measuring unit with electronic probe for on-themachine checking of profile, lead and pitch errors. The CNC provides automatic feedback if corrections are required. During the grinding process the checking unit is stored away safely, protected from heat and grinding dust.
precision
4 GS 400
Easy and intuitive operator guidance n EMAG SU Dialogue Software for full operator guidance including plausibility checks, management of grinding/dressing processes and storage of process and profile data. n Siemens 840 D Solution line CNC with high-level geometric programming for simplified profile and helix angle generation. n “Autotuning” function during the grinding process. n Profile, lead and topological modifications are freely programmable.
n Twisted flanks (BIAS) are generated by simple data input for electronic profile generation. n Remote diagnostics system for software upgrades and troubleshooting. n Interface between the machine control programme and the resharpening programme for automatic correction of some geometric parameters (For example: fHĐ, cĐ, fHĐ, cĐ)
Resharpening diagrams
User-friendly input screens (shown: twisting profile correction)
Input drawing
GS 400 5
Flexibility at your service The GS 400 is extremely flexible and user-friendly, and this allows meeting a wide range of requirements with simple options. The module for grinding the shaving cutter external diameter is available upon request to fulfil any production request of the customer. Furthermore, this machine ensures incomparable results also in particular applications like, for example, the grinding of master gears for which EMAG SU is recognised and known all over the world.
Dressing for fast and reliable profile correction The new concept of the dressing unit with its high-speed dressing axis significantly cuts down dressing time while assuring maximum accuracy. The active profile is defined by an unlimited number of points of the theoretical involute form (TIF). Five different wheel dressing operations are managed entirely by the CNC, employing special software cycles for: active profile, undercut, outside diameter, reduction of wheel tip and wheel back thickness. The control of the grinding wheel correct position and geometry is detected without sensors.
Dressing unit with diamond for rough and finish dressing
Optional dressing unit 6 GS 400
Dressing unit for grinding wheel back
Technical data Workpiece diameter
mm
68 - 400
Module
mm
0.5 - 15
Face width, max.
mm
70
No. of teeth
unlimited
Speed of work spindle slide, max.
m/min
18
Stroke rate of work spindle slide, max.
stroke/min
80
Diameter of grinding wheel
mm
630 - 760
Speed of grinding wheel
rpm
0 - 900
Stroke of vertical slide, max.
mm
215
Swivel range of grinding spindle
degrees
RH 38 / LH 60
Pressure angle range
degrees
-5 / +30
Dresser speed
mm/min
0 - 500
Stroke of dresser, max.: Z-axis (parallel to grinding spindle)
mm
50
X-axis (perpend. to grinding spindle)
mm
140
Maximum absorbed power
kW
<12
Machine weight, approx.
kg
6,000
Technical data is subject to change, maximum values depending on application
GS 400 7
EMAG Salach GmbH Austria Glaneckerweg 1 5400 Hallein Austria Phone: +43 6245 76023-0 Fax: +43 6245 76023-20 E-Mail: info@austria.emag.com
Frankfurt Martin-Behaim-Strasse 12 63263 Neu-Isenburg Germany Phone: +49 6102 88245-0 Fax: +49 6102 88245-412 E-Mail: info@frankfurt.emag.com
Denmark Horsvangen 31 7120 Vejle Ø Denmark Phone: +45 75 854854 Fax: +45 75 816276 E-Mail: info@daenemark.emag.com
Market Companies EUROPE EMAG MILANO S.r.l. Via dei Mille 31 20098 San Giuliano Milanese (Mi) Italy Phone: +39 02 905942-1 Fax: +39 02 905942-24 E-mail: info.emagsu@emag.com EMAG MILANO S.r.l. Succursale en France 5 Avenue de l'Europe 18150 La Guerche sur l'Aubois France Phone: +33 02 48 7711-00 Fax: +33 02 48 7111-29 E-Mail: info.france@emag.com EMAG MILANO S.r.l. Sucursal en España Pasaje Arrahona, n° 18 Polígono Industrial Santiga 08210 Barberà del Vallès (Barcelona) Spain Phone: +34 93 7195080 Fax: +34 93 7297107 E-mail: info.spain@emag.com
EMAG UK Ltd. Newport Road (Newport House) ST16 1DA Stafford United Kingdom Phone: +44 1902 37609-0 E-mail: info@uk.emag.com EMAG OOO ul. Akademika Chelomeya 3/2 117630 Moscow Russia Phone: +7 495 287 0960 Fax: +7 495 287 0962 E-mail: info@russia.emag.com AMERICA EMAG L.L.C. USA 38800 Grand River Avenue Farmington Hills, MI 48335 USA Phone: +1 248 477-7440 Fax: +1 248 477-7784 E-mail: info@usa.emag.com EMAG MEXICO Maquinaria EMAG Mexico S de RL de CV Av. Hercules 301 Nave 1 Poligono Empresarial Santa Rosa 76220 Santa Rosa Jauregui, Querétaro Mexico Phone: +52 442 291 1552 E-mail: info.mexico@emag.com
Sweden Glasgatan 19B 73130 Köping Sweden Phone: +46 221 40305 E-Mail: info@sweden.emag.com
Poland ul. Krzycka 71A / 6 53-020 Wrocław Poland Phone: +48 728 389 989 E-Mail: info@poland.emag.com
Hungary Gerenda 10 1163 Budapest Hungary Phone: +36 30 9362-416 E-Mail: lbujaki@emag.com
Turkey Sanayi Cad. No.: 44 Nish İstanbul Sitesi D Blok D: 155 Yenibosna – Istanbul Turkey Phone: +90 532 694 54 44 E-Mail: ckoc@emag.com
Czech Republic Lolkova 766 103 00 Praha 10 – Kolovraty Tschechien Phone: +420 731 476070 E-Mail: mdelis@emag.com EMAG DO BRASIL Edifício Neo Corporate Offices, CJ 1503 Rua Enxovia, 472 04711-030 São Paulo SP Brazil Phone: +55 11 38370145 Fax: +55 11 38370145 E-mail: info@brasil.emag.com ASIA EMAG (China) Machinery Co., Ltd. Sino-German Advanced Manufacturing Technology International Innovation park Building 2, No. 101, Chen Men Jing Road 215400 Taicang Jiangsu, China Phone: +86 512 5357-4098 Fax: +86 512 5357-5399 E-mail: info@emag-china.com EMAG (Chongqing) Intelligent Technical Co., Ltd No.506, No.117 Yunhan Avenue Beibei District 400711 Chongqing China E-Mail: info@emag-china.com
TAKAMAZ EMAG Ltd. 1-8 Asahigaoka Hakusan-City Ishikawa Japan, 924-0004 Japan Phone: +81 76 274-1409 Fax: +81 76 274-8530 E-mail: info@takamaz.emag.com EMAG INDIA Pvt. Ltd. Technology Centre No. 17/G/46-3, Industrial Suburb, 2nd Stage, Yeshwantpur, Bengaluru – 560 022 India Phone: +91 80 50050163 E-mail: info@india.emag.com
EMAG KOREA Ltd. Rm204, Biz center, SKn Technopark, 124 Sagimakgol-ro, Sangdaewon-dong, Jungwon-gu, Seongnam City, Gyeonggi-do, 462-721 South Korea Phone: +82 31 776-4415 Fax: +82 31 776-4419 E-mail: info@korea.emag.com
GS400_en_v005
Salach Austrasse 24 73084 Salach Germany Phone: +49 7162 17-0 Fax: +49 7162 17-4027 E-Mail: info@salach.emag.com