Issuu

NO. 32

SCHERER · KOEPFER · RICHARDON · ELDEC · LASER TEC · REINECKER · KARSTENS · KOPP · NAXOS-UNION · WEISS · SU · ECM

Brake disks

PLEASE VISIT US!

for the whole life of the car

EDNA IoT

Data-optimized production made easy

HALL 4 BOOTH A32/B17

VTC 200 CD

Highly productive 4-axis machining of shaft ends

Customers

A visit to Mack Rides GmbH & Co. KG

TECHNOLOGY CONNECTED: DIGITALIZATION AND ELECTROMOBILITY

Visit us at EMO 2021 in Milan!

t’s finally happening again! EMO 2021 is the first major industrial trade fair in Europe since the beginning of the pandemic and we look forward to finally having a personal conversation with you, our customers. See our latest developments in booth A32/B17. Even though there were no trade fairs last year, there have been a lot of new developments here in the EMAG Group that we want to present to you live in Milan. At the top of our list are the new digital expansion stages of the VL machines, which are now being delivered IoT-ready (more on the next page). In addition, speaking of hardware, we now offer exciting innovations with addition of machines from EMAG SU (more on page 8). In short, there are many good reasons to visit us at EMO in Milan. This edition of EMAG News provides a small glimpse, which we hope you enjoy reading. We look forward to welcoming you in Milan.

IoT

EDNA IOT-READY EX-WORKS:

VERTICAL PICK-UP TURNING MACHINES MAKE IT EASY TO GET STARTED WITH DATAOPTIMIZED PRODUCTION We are convinced that the future belongs to data-optimized production. Improving cycle times and reducing unit costs are important, but we go one step further and put the focus on overall equipment eﬀectiveness (OEE) and its optimization as a basis of manufacturing data.

WHAT DOES IOT-READY MEAN?

sing data analysis, unnecessary downtimes – due to component wear or, in the worst case, due to the failure of a machine – can be reduced or even avoided entirely. Productivity increases of over 10% are the rule here. To make entering the world of data-optimized production as easy as possible for our customers, all the machines of the VL Series now come standard in an IoT-ready state. This means that data analysis on the machines can be started virtually immediately. Find more information on data-optimized production on page 18 of this EMAG News.

By IoT-Ready, we mean that the machines are delivered ready to integrate directly into existing IoT networks without a lot of eﬀort. Speciﬁcally, this means that the machines are equipped with an EDNA IoT core (an IPC).

LIVE

This IPC is already installed and networked with the machine control. In addition, the machines are equipped with EDNA NEURON 3DG sensors, one or more acceleration sensors on the spindle and possibly the Y-axis, which enables regular automatic monitoring of the machine’s health. With this equipment, data-optimized production can begin immediately.

at the

TYPICAL WORKPIECES THAT ARE MACHINED ON MACHINES OF THE VL SERIES

54.6 SEC.

Sprocket

Machines: VL 2 Pre-forged part diameter: 50 mm Material: 16MnCr5 2 OPs

TECHNICAL DATA

Drive gear

Intermediate gear Machines: VL 2 Sawn part diameter: 60 mm Material: C45 2 OPs

154.8 SEC.

Machines: VL 6 Forged part diameter: 220 mm Material: 16MnCr5 2 OPs

Housing

VL SERIES Workpieces Line cycle time

35.4 sec.

198.6 SEC.

Machines: VL 6 Sawn part diameter: 220 mm Material: 42CrMo4 3 OPs

Spur gear

Piston

143.4 SEC.

212 SEC.

Machines: VL 8 External diameter: 320 mm Material: 16MnCr5 2 OPs

Further information on EDNA IoT solutions can be found at the link below.

VL 2

VL 4

VL 6

VL 8

Workpiece diameter, max.

100

200

300

400

Chuck diameter

160

260

400

500

Workpiece length, max.

150

200

250

300

Travel distances, X/Y (optional)/Z

650/±50/375

760/±30/415

900/±30/495

1,110/±30/595

» Power rating, 40%/100% duty cycle

18/14

25/18

39/28

44/35

» Torque, 40%/100% duty cycle

ft-lb

77/59

280/202

460/340

775/600

» Speed, max.

rpm

6,000

4,500

3,100

2,850

Quantity

in in in in

4 6 6

26/±2/15

10 8

30/±1/16

35/±1/19

20 12

43/±1/23

Main spindle

Turret tool positions

Machines: VL 4 Sawn part diameter: 100 mm Material: 46S20 2 OPs

The VL 2 with the new EDNA HMI Lite control

Rapid-traverse rate, X/Y (optional)/Z

m/min

24/19

57/44

60/30/30

34/24

207/149

60/15/30

52/38

339/251

60/15/30

572/443

60/15/30

2,362/1,181/1,181

2,362/591/1,181

Revolutions of driven tools

rpm

6,000

Torque of driven tools, 30%/100% duty cycle

ft-lb

27/15

48/30

20/11

See the webinar on the topic of IoT @ EMAG here

59/47

ipm

20/11

EMAG MEDIA LIBRARY

35/22

WPG 7

EMAG WEISS

WPG 7:

COMPACT, UNIVERSAL, EXTERNAL CIRCULAR GRINDING MACHINE FOR WORKPIECES UP TO 250 MILLIMETERS IN LENGTH

TECHNICAL DATA

Highly productive, ﬂexible, and with an extremely small footprint – the WPG 7 CNC external circular grinding machine delivers signiﬁcantly increased performance for machining small and medium-sized workpieces.

WPG 7

Center height

100 (125)

Distance between centers

280

390

m/min

in in

4 (5)

Longitudinal axis (Z) » Longitudinal travel » Feed rate » Table adjustment

ipm

591

190

m/min

Lateral axis (X) » Lateral travel

se this solution to perfect your grinding processes. Machine workpieces up to 250 mm in length and with a maximum diameter of 200 mm extremely eﬃciently with the WPG 7 from EMAG Weiss.

» Feed rate

ipm

394

» Grinding wheel diameter

400 (500)

» Max. grinding wheel width

» Grinding wheel bore

127 (203)

» Grinding wheel peripheral surface speed

m/s

Grinding headstock

This is made possible by a rigid machine design, very dynamic axes, a powerful grinding wheel drive unit and an extremely small footprint. Overall, the WPG 7 only requires around four-square meters of space! Easily accessible, this robust machine can be retooled quickly for diﬀerent machining jobs.

in in in

ips

16 (20) 3

1,968

Workpiece headstock W20

» Mounting taper » Speed

(W25 or MK4, MK5)

m/s ips

0 to 2,000 0 to 78,740

LIVE at the

WPG 7 from EMAG Weiss

WORKPIECES

EMAG FILM See the WPG 7 here in the animation:

G 250

EMAG SU

EMAG SU G 250:

GEAR GRINDING: HIGHEST EFFICIENCY AT MAXIMUM PRECISION

BENEFITS

» Direct drives for tool spindles and workpiece spindles with independent cooling circuits

» Use of small generating grinding wheels with a usable

root diameter of at least 68 mm

he G 250 from EMAG SU is ideal for components up to modulus 7 and with an outer diameter of 250 millimeters. Axle drive wheels, gear wheels or shafts with a maximum length of up to 550 millimeters can be finished with this solution by using either generating grinding or profile grinding. The machine has two table spindles in order to minimize idle times during the manufacturing process. In addition, great emphasis was placed on flexibility. For example, the G 250 can also be equipped with very small grinding wheels and worm grinding wheels. In the G 250 HS variant, the machine is also equipped with a high-speed grinding head (max. 20,000 rpm) on the main grinding spindle for generating grinding as well as profile grinding with very small grinding wheels. For components with an interfering contour, generating grinding is often used rather than profile grinding, leading to significantly shorter grinding times.

» Grinding of workpieces sporting interfering contours

by using small proﬁle grinding wheels (30 mm) possible

LIVE at the

SU G 250 from EMAG SU

and workpiece clamping systems

250

Workpiece length, max.

0.5 – 7.0 550

Tooth width, max.

380

Swivel angle Grinding wheel diameter, max./min.

° mm

±45 250/90

Grinding wheel width

180

Grinding speed, max.

m/s mm

Module

in in

Dressing tool diameter

of the workpiece

» Topological generating grinding featuring simple

operation through the visualization of the inputs in the dialog software

10/3 7

80 123 5

WORKPIECES

Sun gear shaft

» Optional automatic loading and unloading

G 250 mm

Workpiece diameter, max.

Planetary gear

» Large tool clamping capacity/standard tool the machining process

TECHNICAL DATA

Planetary gear

grinding wheels on the main spindle

» Loading and unloading of the workpiece in parallel to

Short chip-to-chip times, intelligent axis concepts, thermal stability (cast base) and ease-of-use – with these quality features, the machines from EMAG SU ensure boosts to performance.

» Generating grinding worm wheels and proﬁle

Gear wheel

The G 250 is equipped with a double workpiece spindle, which means that unproductive idle times are nearly eliminated.

ELC

450 LMD

LASER METAL DEPOSITION FROM EMAG LASERTEC:

BRAKE DISKS FOR THE WHOLE LIFE OF A CAR

articulate reduction and corrosion protection are big changes in brake disk technology. Manufacturers rely on carbide-coated brake disks that are practically wear-free. However, coating them with tungsten carbide is a particular challenge because the process must be reliable and eﬃcient.

Dr. Mootz, Managing Director at EMAG LaserTec

With the new ELC 450 LMD (“Laser Metal Deposition”) machine, the laser welding specialists from EMAG LaserTec now oﬀ er a practical alternative – apply the multi-layered, powdered metal to the brake disk using a laser welding process. The powder melts completely in the laser beam without wasting material.

How did this coating technology come about? Our expertise in laser technology provides an ideal basis for this application. We also have a lot of experience in the development of holistic processes. Both have been taken into account here. The machine guarantees perfect coating processes with weighing, laser cleaning and preheating as well as with sophisticated laser tool technology.

What role do upstream and downstream processes play? The disk blank is turned prior to coating, and after the coating process, a grinding process is necessary. Both processes can be implemented with EMAG technology. Our strengths – extensive process experience combined with holistic production solutions “from a single source.”

What is the status concerning the development of the ELC 450 LMC? The development of the machine has been completed. We are currently working with a customer to carry out coating tests. But, we already see that we will be able to oﬀer an extremely reliable and eﬃcient solution in the future.

LASER COATING PROCESS

THE PROCESS IN DETAIL: 1

WEIGHING: After loading, the component is initially weighed in an uncoated state. This value serves as a reference in order to be able to determine the “coating weight” later (during the second weighing after an initial pass).

LASER CLEANING:

PREHEAT:

Working materials and dirt are removed from the blank without leaving any residue.

Induction technology from EMAG eldec ensures an ideal processing temperature.

Laser beam

4 5

LASER CLADDING:

Powder

EMAG FILM

See the process in an animation here

Powder

One layer is applied per laser process – ﬁrst an adhesive layer, then the carbide coating.

Coating Melt pool

MEASURING/TURNING: Here, the component is measured and (after two coating passes) turned over to process the second side. The coating process then starts all over again. Finally (after a total of 4 passes), the component is unloaded.

Connection zone Heat inﬂuence zone

Brake disk

HIGHLY PRODUCTIVE SHAFT MANUFACTURING:

CENTER DRIVE MACHINES FOR HIGHLY PRODUCTIVE 4-AXIS MACHINING OF SHAFT ENDS

CLAMPING

When it comes to machining the ends of shafts, the machines of the VT Series with center drive are ideal manufacturing systems. On one hand,4-axis machining on the VT machines guarantees highly eﬃcient machining processes. On the other hand, the clamping of the shafts in the center drive enables optimal values in terms of positional tolerance and roundness.

» Depending on the workpiece, clamping occurs on one or

two clamping levels using collets inside the center drive. The tension is achieved mechanically by springs, opened by hydraulics.

egardless of which clamping concept is used, the large machining compartment of the VT machines and the generous travel path of the two vertically mounted tool turrets enable simultaneous machining of the two shaft ends at any time. For longer workpieces, it is also possible to use an additional steady rest without any problems.

Machine body made of Mineralit® Main spindle Tool turret 1 Tool turret 2 Control system (Fanuc 31i or Siemens 840D sl)

Automation

BENEFITS

HIGHLY PRODUCTIVE SHAFT MANUFACTURING

VTC 200 CD

» Short cycle times thanks to simultaneous 4-axis machining » High accuracy in run-out and positional tolerance » Short idle times due to simultaneous loading and unloading of the machines

» Automatic loading and unloading by workpiece grippers in the tool turrets

OPERATING PRINCIPLE USING THE EXAMPLE OF A ROTOR SHAFT The shafts are clamped and powered in the center drive. As a result, the two ends of the shaft are freely accessible for machining. Example: rotor shaft in hollow design. Both the external and internal machining of the shafts take place here simultaneously at both ends, which enables very short cycle times.

WORKPIECES

Transmission shaft

Axle shaft

Transmission shaft

Variator shaft

Transmission shaft

Camshaft

Transmission shaft

VSC 160

TWIN

VSC 160 TWIN:

HIGH-SPEED TURNING MACHINE FOR LARGE SERIES PRODUCTION The VSC Series is a mechanical engineering classic.

SIMULTANEOUS MACHINING

or many years, EMAG has developed vertical turning machines that load themselves by moving the main spindle and performing various operations in a single clamping operation. In addition, these machines have a consistently symmetrical slide and a machine structure for thermostable production. The overall approach ensures productive and highly accurate processes for many customers. The VSC 160 TWIN is one of the fastest turning machines on the market for components up to 130 mm in diameter.

» One machining compartment, two working spindles » Simultaneous processing of two workpieces with an identical workﬂow

» Diameter and length corrections individually for each working spindle

HIGHLY DYNAMIC, PRECISE AND RELIABLE – THE VSC 160 TWIN » The working spindle with hydrostatic bearings

in the Z-axis ensures outstanding component quality and a high tool service life for soft and hard machining operations

» Closed, thermosymmetrical structure with machine

base made of vibration-damping Mineralit® polymer concrete

» Good chip ﬂow thanks to the vertical design » Low-wear guiding elements » Cooling system for spindle motor, machine body, spindle, and turret

» Turret for 2 x 4 tools

25 µm

WORKING SPINDLE WITH HYDROSTATIC BEARINGS

» The thin oil ﬁlm oﬀers the best damping as a prerequisite for high surface quality and long tool service life – even with interrupted cutting

WORKPIECES The VSC 160 TWIN is mainly used for large-scale production. 14

INTEGRATED QUALITY CONTROL

» Time-saving measuring process for two workpieces at the same time. However, diameter and length corrections are made individually for each workpiece spindle (safety door between button and machining compartment open).

Peter Gröner Team Manager at EMAG Maschinenfabrik GmbH

» Which situations best suit the VSC 160 TWIN? The multi-spindle, vertical pick-up turning machines from EMAG are mainly used in the medium to large-scale manufacturing of precise workpieces. In other words, in situations requiring the production of large quantities of components with maximum precision at minimum cost. Machines in the TWIN design, like the VSC 160 TWIN here, process two workpieces at the same time with an identical workﬂow. This leads to an extremely high output. Of course, we can also implement double-sided processing of OP 10 / OP 20. Processing then takes place on a second VSC TWIN, which is linked to the ﬁrst machine via a turn-over station or a TrackMotion automation system. So, who should invest in a VSC 160 TWIN? In my opinion, it’s worth it for anyone who wants to manufacture high quantities with minimal cycle times in a cost-optimized manner.

TECHNICAL DATA

VSC 160 TWIN 130

Workpiece diameter, max.

Chuck diameter, max.

130/160

Swing diameter

180

Travel distances, X/Z

850/160

» Power rating, 40%/100% duty cycle

23/17

» Torque, 40%/100% duty cycle

71/53

1/min

6,000

m/min

45/30

in in in in

5/6 7

33/6

Main spindle

» Speed, max. Rapid-traverse rate, X/Z

ft-lb rpm ipm

31/23

52/39

6,000

1,772/1,181

HEALTH CHECK

EDNA

HEALTH CHECK + NEURON 3DG

AUTOMATED CONDITION MONITORING AND PREDICTIVE MAINTENANCE FOR YOUR MACHINES Nothing is more expensive than unplanned machine downtime. Expensive staﬀ are idle, production is disrupted and customers are dissatisﬁed with the inability to deliver. In short, no one wants that! This is exactly why we developed the EDNA HealthCheck here at EMAG. Using advanced sensors and data analysis, this system enables regular status analyses of the machines in your production department. If the “health values” of one of your machines deteriorate, this is shown in the results of the analysis. In the full-blown version, you can see the results within minutes and are even proactively informed by our service team if there are critical changes. In this way, you can reschedule maintenance work or production early on.

OPERATING PRINCIPLE The EDNA HealthCheck regularly (either automatically scheduled or triggered manually) carries out a measurement run on all axes of the working spindle. The data determined by NEURON 3DG acceleration sensors are recorded. They are then evaluated using algorithms and examined for anomalies. In the event of a severe decline in health or unusual behavior, the results are always analyzed by an experienced employee. Using the vibration data, the algorithm calculates a health value that enables conclusions to be drawn about the condition of the machine components. On the basis of the tests that are carried out regularly, trend analyses can then be completed in order to make any wear and tear in the components visible. In this way, a service appointment can be arranged in a timely manner and unplanned downtime in production can be avoided.

LIFE CYCLE COSTS OF A MACHINE TOOL

MAINTENANCE STRATEGY IS THE KEY TO A PROFITABLE MANUFACTURING OPERATION 5%

Machine procurement

Planned maintenance 34%

Unplanned maintenance

HEALTH CHECK PROCEDURE

Energy costs

17%

Compressed air costs

NEURON 3DG powered by Montronix y

Regular and automated measurements

STATUS

Facilities costs 15% 20%

The costs for planned and unplanned maintenance, using current maintenance strategies, make up over a third of the life cycle costs of a machine tool. 16

Status check

Capital commitment costs

» Machine learning-based

analysis and evaluation of machine wear and tear

Results of the status check

» Graphical representation of the

health status of the machine components

OUTPUT OF HEALTH DATA IN THE DASHBOARD The health data of the machines are clearly displayed in the EDNA dashboard. This enables discrepancies to be recognized quickly. Here in the example, you can clearly see the drop in the health value of an axis, shown in blue. If the negative trend continues, action should be taken here without delay, as the component quality suﬀers – or in the worst case, it can lead to unplanned downtime. 17

COOPERATION PARTNER ANACISION – SPECIALIST FOR AI & DATA ANALYSIS IN PRODUCTION:

THE EASY WAY TO GET STARTED IN DATAOPTIMIZED PRODUCTION “Industry 4.0” has become a reality. Production processes can be speciﬁcally optimized based on existing data, like a view to product quality and set-up times, for example. And the way to get there is much easier than many think. EMAG partner anacision oﬀ ers a compact Industry 4.0 workshop as well as a data analysis package in order to exploit the potential in a quick and targeted manner.

WORKSHOP: DETERMINING POTENTIAL

DATA ANALYSIS PACKAGE: INCREASE PRODUCTION OUTPUT EMAG EDNA AS THE BASIS

In the second step, the experts from anacision use AI technologies to analyze the existing machine and process data, for example from the EDNA IoT system from EMAG, and thus identify the triggers for downtimes, production errors or ineﬃcient processes. The customer then receives speciﬁc recommendations for action on how to reduce downtimes or increase output in practice.

EDNA from EMAG is a modular Industry 4.0 ecosystem made up of interconnected software and machine components. Large quantities of production data are recorded in the process and prepared for data analysis, which is basis for anacision’s advantages as described here:

If you want to start data-optimized production now, simply contact your designated sales representative at EMAG. They will take care of everything else – it really couldn't be easier.

» In preparation, production experts from anacision hold an initial meeting

with the customer about the current challenges in production. “We familiarize ourselves with manufacturing processes, key service commitments such as adherence to delivery dates, undesired downtimes and much more. We prepare the workshop with this foremost in our minds,” explains Daniel Poodratchi from anacision.

What can be optimized using AI analysis?

» Real-time forecasts of quality:

Reduce time-consuming manual quality assurance processes and reduce the wasting of parts. Detect endangered shift targets and take countermeasures.

After an introduction to the topic of “Artificial Intelligence and Data Analysis,” it comes straight to the point. Along with production managers, factory employees and maintenance staff, the experts define central production challenges that can be optimized using AI data analysis. “This results in one or two recommendations for measurable action steps, which we will clearly state at the end of the workshop. We also quantify the potential for savings and performance improvements,” says Poodratchi.

Systematically reduce brief downtimes

The use of AI technologies in data analysis opens up new potential in production. This includes the following goals, for example:

» Shift targets: » The Workshop is divided into several sections:

Live forecast of shift targets

CONTACT Please contact the EMAG Group with any inquiries or comments.

» Reduce brief downtimes:

Find the causes of systematic downtimes and avoid cost drivers.

» Optimize set-up times:

Increase output with the intelligent planning algorithms from anacision. These minimize set-up changes and delays.

Real-time product quality forecast (NOK)

Causal relationships between process chain & product quality

Health monitoring of critical machine parts 19

EMAG ELDEC GENERATOR TECHNOLOGY AT MACK RIDES:

FOR THE RIGHT MOMENTUM ON A ROLLER COASTER More than a million people ride on roller coasters, water rides or themed rides from Mack Rides every day – all over the world. Every solution is developed and produced at the location in Waldkirch near Freiburg – including rails, vehicles, decorations, animations and much more. On board for rail production: induction technology from EMAG eldec. It ensures precise heat treatment before the ﬁnal straightening of the components.

he development and production of roller coasters is a task for specialists because, despite their enormous size, precision is key. Dimensional deviations outside of narrow tolerances are taboo. Mack Rides brings a wealth of experience to the table. More than 155 roller coasters made in Waldkirch are in operation worldwide. “Each model is a one-off production, since we respond intensively to customer requests. The quantities of the associated components are, therefore, rather small. At the same time, the technical demands are very high,” explains Marcel Martinetz, Head of Equipment Design. “Against this backdrop, we rely on a high level of vertical integration with which we ensure the perfection of the technical details on the one hand, and eﬃciently implement customer requests on the other.”

MACK

RIDES

QUICK AND STABLE PROCESS The solution: including a hand ring inductor and a PICO-SC generator with an output of 15 kilowatts along with a cooling system. In use at Mack Rides for around a year, it has convinced users. It is no longer a problem if the ring inductor loses contact with the rail and Mack Rides also beneﬁts from a very quick process. Operators start the appropriate program via the touchpad surface of the generator and guide the inductor to the component. After a rigidly deﬁned period of time, the desired temperature is reached and the straightening phase can begin.

A current example from rail production makes it clear what that means in concrete terms. It is important to know that these components are up to twelve meters long, but their curved course can only deviate by a maximum of 3 millimeters in length and a maximum of 2 millimeters in track width. This precision is ensured in two steps. After being bent, the rail is inserted into a device and measured by a laser. “We then immediately identify every deviation, which we correct with the help of this special robot clamping solution. To do this, however, the rails must be heated at defined points,” explains Martinetz. In the past, specialists used an acetylene flame for heating, which led to increased workload and risk. In addition, the heat was only applied superficially. Against this backdrop, inductive heating became an alternative. Initial tests showed that a processreliable implementation is not easy because the operator has to position, by hand, a ring inductor so that it makes contact with the pipe. A little inattention is enough to cause it to lose contact. The technology that was first tested led to overload damage. “We then approached EMAG eldec with the task of developing a significantly more robust solution,” explains Martinetz.

EMAG BLOG Read the full interview with Marcel Martinetz, Head of Equipment Design at Mack Rides. He reports on his company’s special expertise and the associated production solutions.

“The main task was to develop a robust solution.” Marcel Martinetz, Head of Equipment Design at Mack Rides

ECM

EMAG ECM

CONTRIBUTION OF MICROSTRUCTURES WITH THE PECM TECHNOLOGY With PECM (Precision Electrochemical Machining), components can be precisely machined within a short time, regardless of their hardness, with high component quality.

ith the PECM technology, a reproduction accuracy of <20 μm and a surface quality of Ra <0.1 μm can be achieved. A fact that has been capitalized on when machining surgical staplers. Here over 40 microstructures, called “pockets," are introduced into a device where ten staplers can be clamped simultaneously. This is done at high precision and to a depth of 0.5 mm. When using conventional methods, the production of these pockets has proven to be challenging as it requires great eﬀort. With this arrangement, cycle times of <1 minute per component can be achieved.

PROCESS DEVELOPMENT FOR FUEL CELLS

PECM technology can show its full strength in the production of such microstructures. PECM is a contact-free process without thermal or mechanical inﬂuences on the components, which oﬀers great advantages, especially with delicate workpieces. The hardness of the material is also irrelevant, since it is eroded at the molecular level. Only electrical conductivity is required.

Fundamentally, fuel cells have a very simple structure. A cell consists of three layers on top of each other: two gas-carrying plates and an electrolyte in between. This simplest form of fuel cell has of course very little power on its own, which is why many fuel cells in series become interconnected to whole fuel cell stacks. These packages are then installed depending on the required performance. However, it is precisely this ﬂat design of the individual fuel cells that poses a manufacturing challenge, as very delicate structures have to be produced in very thinwalled components. Here, PECM technology oﬀers promising machining options that are currently being researched.

Loading is done manually or automatically. The process data can optionally be recorded via an IoT core and visualized and analyzed with diﬀerent IoT modules.

PTS 2500 for processing sophisticated 2D and 3D geometries THE STAPLER

» A stapler is a surgical instrument used to set staples when closing wounds.

The EMAG PTS 2500 enables the highly precise introduction of sophisticated geometries. The ECM or PECM technology from EMAG used for this is an outstanding option, even if many developers and designers are not yet familiar with it.

TECHNICAL DATA

1,070 x 700 x 515

Clamping surface

800 x 550

Generator capacity

A (DC)

2,500 – 5,000

Generator capacity

A (pulse)

6,000 – 12,000

inch

EMAG LINKEDIN If you would like to learn more about the topic, then follow us on LinkedIn, or subscribe to our newsletter on emag.com, where we will keep you informed about the possibilities of PECM technology in the coming months.

PTS 2500

Machining compartment

inch

IoTready

42 x 27.5 x 20

31.5 x 21.5

Salach Austraße 24 73084 Salach Germany Phone: +49 7162 17–0 Fax: +49 7162 17-4027 E-mail: info@salach.emag.com

Austria Glaneckerweg 1 5400 Hallein Austria Phone: +43 6245 76023–0 Fax: +43 6245 76023-20 E-mail: info@austria.emag.com

Frankfurt Martin-Behaim-Strasse 12 63263 Neu-Isenburg Germany Phone: +49 6102 88245–0 Fax: +49 6102 88245-412 E-mail: info@frankfurt.emag.com

Sweden Glasgatan 19B 73130 Köping Sweden Phone: +46 221 40305 E-mail: info@sweden.emag.com

Hungary Gerenda 10 1163 Budapest Hungary Phone: +36 30 9362-416 E-mail: lbujaki@emag.com

Poland ul. Krzycka 71A/6 53-020 Wrocław Poland Phone: +48 728 389 989 E-mail: info@poland.emag.com

Czech Republic Lolkova 766 103 00 Praha 10 – Kolovraty Czech Republic Phone: +420 731 476070 E-mail: mdelis@emag.com

Turkey Sanayi Cad. No.: 44 Nish İstanbul Sitesi D Blok D: 155 Yenibosna – Istanbul Turkey Phone: +90 532 694 54 44 E-mail: ckoc@emag.com

EMAG Salach GmbH

Marketing companies EUROPE

AMERICA

ASIA

EMAG MILANO S.r.l. Via dei Mille 31 20098 San Giuliano Milanese (Mi) Italy Phone: +39 02 905942-1 Fax: +39 02 905942-24 E-mail: info.milano@emag.com

EMAG L.L.C. USA 38800 Grand River Avenue Farmington Hills, MI 48335 USA Phone: +1 248 477-7440 Fax: +1 248 477-7784 E-mail: info@usa.emag.com

EMAG MILANO S.r.l. Succursale en France 5 Avenue de l’Europe 18150 La Guerche sur l’Aubois France Phone: +33 02 48 7711-00 Fax: +33 02 48 7111-29 E-mail: info.france@emag.com

EMAG MEXICO Maquinaria EMAG Mexico S de RL de CV Av. Hercules 301 Nave 1 Poligono Empresarial Santa Rosa 76220 Santa Rosa Jauregui, Querétaro Mexico Phone: +52 442 291 1552 E-mail: info.mexico@emag.com

EMAG (China) Machinery Co., Ltd. Sino-German Advanced Manufacturing Technology International Innovation park Building 2, No. 101, Chen Men Jing Road 215400 Taicang Jiangsu, China Phone: +86 512 5357-4098 Fax: +86 512 5357-5399 E-mail: info@emag-china.com

EMAG MILANO S.r.l. Sucursal en España Pasaje Arrahona, n° 18 Polígono Industrial Santiga 08210 Barberà del Vallès (Barcelona) Spain Phone: +34 93 7195080 Fax: +34 93 7297107 E-mail: info.spain@emag.com

EMAG DO BRASIL Edifício Neo Corporate Oﬃces, CJ 1503 Rua Enxovia, 472 04711-030 São Paulo SP Brazil Phone: +55 11 38370145 Fax: +55 11 38370145 E-mail: info@brasil.emag.com

EMAG (Chongqing) Intelligent Technical Co., Ltd Building 7, No. 24 Fangzheng Avenue Beibei District Chongqing 400714 China Phone: +86 23 49783399 Fax: +86 23 49783388 E-mail: info@emag-china.com

Subject to technical changes. Illustration of all machines in trade show versions, may diﬀer from the standard.

EMAG UK Ltd. Newport Road (Newport House) ST16 1DA Staﬀord Great Britain Phone: +44 1902 37609–0 E-mail: info@uk.emag.com

EMAG KOREA Ltd. Rm204, Biz center, SKn Technopark 124 Sagimakgol-ro, Sangdaewon-dong, Jungwon-gu, Seongnam City, Gyeonggi-do, 462-721 South Korea Phone: +82 31 776-4415 Fax: +82 31 776-4419 E-mail: info@korea.emag.com

TAKAMAZ EMAG Ltd. 1-8 Asahigaoka Hakusan-City Ishikawa Japan, 924-0004 Japan Phone: +81 76 274-1409 Fax: +81 76 274-8530 E-mail: info@takamaz.emag.com EMAG INDIA Pvt. Ltd. Technology Centre No. 17/G/46-3, Industrial Suburb 2nd Stage, Yeshwantpur Bengaluru – 560 022 India Phone: +91 80 50050163 E-mail: info@india.emag.com

EMAG OOO ul. Akademika Chelomeya 3/2 117630 Moscow Russia Phone: +7 495 287 0960 Fax: +7 495 287 0962 E-mail: info@russia.emag.com

RICHARDON

ECM