Weber Technical Mortars for the Construction Industry
Weber Technical Mortars for the Construction Industry
Fire Stations Spalling concrete, vertical and soffit areas: weber.cem concrete repair system, a fully tested concrete repair and protection system which complies with EN 1504.
Sealing of facades: weber.tec aquapel WR, a high-performance, silane-based water repellent & weber.tec acrylic sealer a low-viscosity, penetrating sealer for concrete and masonry. Floor protection: Self-levelling cementitious floor screeds.
Car Parks Car parks are relatively flexible concrete structures and therefore require special materials for repairs and reinstatement.
For concrete repairs to structural elements: weber.cem concrete repair system, a complete scheme of primers, thixotropic repair mortars and anti-carbonation coatings. For floor repairs: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement.
Solutions for Airports
Saint-Gobain Weber Ltd.
Surface protection: weber.tec acrylic sealer, in-surface impregnating hardening and sealing solution.
For floor and column strengthening: weber.tec en-force composite reinforcement system, using carbon-fibre plate bonding and aramid sheet wrapping techniques.
Dickens House Enterprise Way Maulden Road Flitwick Bedford MK45 5BY UK
Runways, Taxiways & Aprons • Terminal Buildings • Aircraft Hangars • Fire Stations • Car Parks
Tel: +44 (0)8703 330 070 Fax: +44 (0)800 014 2995 www.netweber.co.uk
email: mail@netweber.co.uk @SGWeberUK
Over 2m : weber.cem pyratop, rapid strength-gaining thin bonded topping. 2
Weber Technical Mortars for the Construction Industry
weber.tec EP mortar, high strength epoxy resin mortar for small quick patch repairs.
www.netweber.co.uk
Rev: 11/2014
Technical • Engineered • Strength
A solution for every application
3
Weber Technical Mortars for the Construction Industry
Weber Technical Mortars for the Construction Industry
Installation of cable slots
Weber has a range of rapid solutions specially designed to assist the airport infrastructure managers in overcoming problems in many areas of airport maintenance.
The filling of cable slots with a suitable material is governed by the type of substrate, whether stiff concrete or more flexible asphalt. The cable grout is not intended as a joint sealant.
Runways, Taxiways And Parking Aprons The need to have runways and taxiways operational for the maximum period of time is of great importance to airport operators and airlines but the critical factor is safety. Every airport is responsible for keeping its runways and taxiways clear of foreign object damage (FOD), as well as clearing snow and ice from all surfaces on which aircraft move. The airport must also maintain runway and taxiway paving and is responsible for the upkeep of the special lighting and signs required for safe aircraft operation.
weber.tec cable grout Rapid setting resin-based pourable grout for cable slots in roads and runways. Available in standard and winter grades and 2 colours – grey for concrete and black for asphalt.
Installation of lighting systems
Concrete pavement repairs
weber.tec bedding mortar Rapid setting resin-based mortar for bedding light bases. Available in standard and winter grades.
Spalled concrete: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement.
The method of fixing and the products used in the installation of runway and taxiway lights are dependent on the type of lighting unit and on the substrate in which it is being grouted, normally concrete or asphalt. Ultra rapid setting products that can be mixed and cured at low temperatures are required.
weber.tec grout FG Rapid setting resin-based pourable grout for fixing light bases. Available in standard and winter grades and 2 colours: grey for concrete and black for asphalt.
Concrete paved runways, taxiways, hard standings and parking aprons are subject to damage by abrasion, impact, frost attack, subsidence and cracking. They need to be repaired speedily with special fast setting concretes and protected by a surface hardening impregnating agent.
Over 2m2: weber.cem pyratop, rapid strengthgaining thin bonded topping. Surface protection: weber.tec acrylic sealer, in-surface impregnating hardening and sealing solution.
Service access and duct cover frame bedding There are many services such as water mains, lighting, power, drainage etc located under runways that require access hatches. These have to be fixed with quick-setting durable bedding mortars. Bedding of manhole frames: weber.tec bedding mortar, rapid setting resin-based thixotropic mortar for heavy duty applications.
Bedding of drainage ducts and grills: weber.cem pyrabed, cement-based rapid setting mortar for bedding of lighter duty fixtures.
Terminal Buildings Spalling concrete vertical and soffit areas: weber.cem concrete repair system, a fully tested concrete repair and protection system which complies with EN 1504. Installation of barriers: weber.tec anchor grout, a fast-set polyester resin compound for anchoring and fixing.
Facades renovation: Refurbish with EWI, renders or seal with weber.tec aquapel WR, a high-performance, silane-based water repellent or weber.cote smooth or EC, protective and anti-carbonation coatings.
Aircraft Hangars Hangars provide covered floor space to accommodate aircraft for scheduled inspections and services and maintenance. Pavements for hangar floors must be designed to support aircraft loads.
Floor repairs: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement. Over 2m2: weber.cem pyratop, rapid strength-gaining thin bonded topping.
General use: weber.tec EP mortar, high strength epoxy resin mortar for small quick patch repairs. Floor protection: Self-levelling cementitious floor screeds.
Solutions for Airports
www.netweber.co.uk
Weber Technical Mortars for the Construction Industry
Weber Technical Mortars for the Construction Industry
Fire Stations Spalling concrete, vertical and soffit areas: weber.cem concrete repair system, a fully tested concrete repair and protection system which complies with EN 1504.
Sealing of facades: weber.tec aquapel WR, a high-performance, silane-based water repellent & weber.tec acrylic sealer a low-viscosity, penetrating sealer for concrete and masonry. Floor protection: Self-levelling cementitious floor screeds.
Car Parks Car parks are relatively flexible concrete structures and therefore require special materials for repairs and reinstatement.
For concrete repairs to structural elements: weber.cem concrete repair system, a complete scheme of primers, thixotropic repair mortars and anti-carbonation coatings. For floor repairs: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement.
Solutions for Airports
Saint-Gobain Weber Ltd.
Surface protection: weber.tec acrylic sealer, in-surface impregnating hardening and sealing solution.
For floor and column strengthening: weber.tec en-force composite reinforcement system, using carbon-fibre plate bonding and aramid sheet wrapping techniques.
Dickens House Enterprise Way Maulden Road Flitwick Bedford MK45 5BY UK
Runways, Taxiways & Aprons • Terminal Buildings • Aircraft Hangars • Fire Stations • Car Parks
Tel: +44 (0)8703 330 070 Fax: +44 (0)800 014 2995 www.netweber.co.uk
email: mail@netweber.co.uk @SGWeberUK
Over 2m : weber.cem pyratop, rapid strength-gaining thin bonded topping. 2
Weber Technical Mortars for the Construction Industry
weber.tec EP mortar, high strength epoxy resin mortar for small quick patch repairs.
www.netweber.co.uk
Rev: 11/2014
Technical • Engineered • Strength
A solution for every application
3
Weber Technical Mortars for the Construction Industry
Weber Technical Mortars for the Construction Industry
Installation of cable slots
Weber has a range of rapid solutions specially designed to assist the airport infrastructure managers in overcoming problems in many areas of airport maintenance.
The filling of cable slots with a suitable material is governed by the type of substrate, whether stiff concrete or more flexible asphalt. The cable grout is not intended as a joint sealant.
Runways, Taxiways And Parking Aprons The need to have runways and taxiways operational for the maximum period of time is of great importance to airport operators and airlines but the critical factor is safety. Every airport is responsible for keeping its runways and taxiways clear of foreign object damage (FOD), as well as clearing snow and ice from all surfaces on which aircraft move. The airport must also maintain runway and taxiway paving and is responsible for the upkeep of the special lighting and signs required for safe aircraft operation.
weber.tec cable grout Rapid setting resin-based pourable grout for cable slots in roads and runways. Available in standard and winter grades and 2 colours – grey for concrete and black for asphalt.
Installation of lighting systems
Concrete pavement repairs
weber.tec bedding mortar Rapid setting resin-based mortar for bedding light bases. Available in standard and winter grades.
Spalled concrete: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement.
The method of fixing and the products used in the installation of runway and taxiway lights are dependent on the type of lighting unit and on the substrate in which it is being grouted, normally concrete or asphalt. Ultra rapid setting products that can be mixed and cured at low temperatures are required.
weber.tec grout FG Rapid setting resin-based pourable grout for fixing light bases. Available in standard and winter grades and 2 colours: grey for concrete and black for asphalt.
Concrete paved runways, taxiways, hard standings and parking aprons are subject to damage by abrasion, impact, frost attack, subsidence and cracking. They need to be repaired speedily with special fast setting concretes and protected by a surface hardening impregnating agent.
Over 2m2: weber.cem pyratop, rapid strengthgaining thin bonded topping. Surface protection: weber.tec acrylic sealer, in-surface impregnating hardening and sealing solution.
Service access and duct cover frame bedding There are many services such as water mains, lighting, power, drainage etc located under runways that require access hatches. These have to be fixed with quick-setting durable bedding mortars. Bedding of manhole frames: weber.tec bedding mortar, rapid setting resin-based thixotropic mortar for heavy duty applications.
Bedding of drainage ducts and grills: weber.cem pyrabed, cement-based rapid setting mortar for bedding of lighter duty fixtures.
Terminal Buildings Spalling concrete vertical and soffit areas: weber.cem concrete repair system, a fully tested concrete repair and protection system which complies with EN 1504. Installation of barriers: weber.tec anchor grout, a fast-set polyester resin compound for anchoring and fixing.
Facades renovation: Refurbish with EWI, renders or seal with weber.tec aquapel WR, a high-performance, silane-based water repellent or weber.cote smooth or EC, protective and anti-carbonation coatings.
Aircraft Hangars Hangars provide covered floor space to accommodate aircraft for scheduled inspections and services and maintenance. Pavements for hangar floors must be designed to support aircraft loads.
Floor repairs: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement. Over 2m2: weber.cem pyratop, rapid strength-gaining thin bonded topping.
General use: weber.tec EP mortar, high strength epoxy resin mortar for small quick patch repairs. Floor protection: Self-levelling cementitious floor screeds.
Solutions for Airports
www.netweber.co.uk
Weber Technical Mortars for the Construction Industry
Weber Technical Mortars for the Construction Industry
Installation of cable slots
Weber has a range of rapid solutions specially designed to assist the airport infrastructure managers in overcoming problems in many areas of airport maintenance.
The filling of cable slots with a suitable material is governed by the type of substrate, whether stiff concrete or more flexible asphalt. The cable grout is not intended as a joint sealant.
Runways, Taxiways And Parking Aprons The need to have runways and taxiways operational for the maximum period of time is of great importance to airport operators and airlines but the critical factor is safety. Every airport is responsible for keeping its runways and taxiways clear of foreign object damage (FOD), as well as clearing snow and ice from all surfaces on which aircraft move. The airport must also maintain runway and taxiway paving and is responsible for the upkeep of the special lighting and signs required for safe aircraft operation.
weber.tec cable grout Rapid setting resin-based pourable grout for cable slots in roads and runways. Available in standard and winter grades and 2 colours – grey for concrete and black for asphalt.
Installation of lighting systems
Concrete pavement repairs
weber.tec bedding mortar Rapid setting resin-based mortar for bedding light bases. Available in standard and winter grades.
Spalled concrete: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement.
The method of fixing and the products used in the installation of runway and taxiway lights are dependent on the type of lighting unit and on the substrate in which it is being grouted, normally concrete or asphalt. Ultra rapid setting products that can be mixed and cured at low temperatures are required.
weber.tec grout FG Rapid setting resin-based pourable grout for fixing light bases. Available in standard and winter grades and 2 colours: grey for concrete and black for asphalt.
Concrete paved runways, taxiways, hard standings and parking aprons are subject to damage by abrasion, impact, frost attack, subsidence and cracking. They need to be repaired speedily with special fast setting concretes and protected by a surface hardening impregnating agent.
Over 2m2: weber.cem pyratop, rapid strengthgaining thin bonded topping. Surface protection: weber.tec acrylic sealer, in-surface impregnating hardening and sealing solution.
Service access and duct cover frame bedding There are many services such as water mains, lighting, power, drainage etc located under runways that require access hatches. These have to be fixed with quick-setting durable bedding mortars. Bedding of manhole frames: weber.tec bedding mortar, rapid setting resin-based thixotropic mortar for heavy duty applications.
Bedding of drainage ducts and grills: weber.cem pyrabed, cement-based rapid setting mortar for bedding of lighter duty fixtures.
Terminal Buildings Spalling concrete vertical and soffit areas: weber.cem concrete repair system, a fully tested concrete repair and protection system which complies with EN 1504. Installation of barriers: weber.tec anchor grout, a fast-set polyester resin compound for anchoring and fixing.
Facades renovation: Refurbish with EWI, renders or seal with weber.tec aquapel WR, a high-performance, silane-based water repellent or weber.cote smooth or EC, protective and anti-carbonation coatings.
Aircraft Hangars Hangars provide covered floor space to accommodate aircraft for scheduled inspections and services and maintenance. Pavements for hangar floors must be designed to support aircraft loads.
Floor repairs: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement. Over 2m2: weber.cem pyratop, rapid strength-gaining thin bonded topping.
General use: weber.tec EP mortar, high strength epoxy resin mortar for small quick patch repairs. Floor protection: Self-levelling cementitious floor screeds.
Solutions for Airports
www.netweber.co.uk
Weber Technical Mortars for the Construction Industry
Weber Technical Mortars for the Construction Industry
Fire Stations Spalling concrete, vertical and soffit areas: weber.cem concrete repair system, a fully tested concrete repair and protection system which complies with EN 1504.
Sealing of facades: weber.tec aquapel WR, a high-performance, silane-based water repellent & weber.tec acrylic sealer a low-viscosity, penetrating sealer for concrete and masonry. Floor protection: Self-levelling cementitious floor screeds.
Car Parks Car parks are relatively flexible concrete structures and therefore require special materials for repairs and reinstatement.
For concrete repairs to structural elements: weber.cem concrete repair system, a complete scheme of primers, thixotropic repair mortars and anti-carbonation coatings. For floor repairs: Up to 2m2: weber.cem pyrapatch, fast setting repair concrete for thin bonded repairs or full depth concrete reinstatement.
Solutions for Airports
Saint-Gobain Weber Ltd.
Surface protection: weber.tec acrylic sealer, in-surface impregnating hardening and sealing solution.
For floor and column strengthening: weber.tec en-force composite reinforcement system, using carbon-fibre plate bonding and aramid sheet wrapping techniques.
Dickens House Enterprise Way Maulden Road Flitwick Bedford MK45 5BY UK
Runways, Taxiways & Aprons • Terminal Buildings • Aircraft Hangars • Fire Stations • Car Parks
Tel: +44 (0)8703 330 070 Fax: +44 (0)800 014 2995 www.netweber.co.uk
email: mail@netweber.co.uk @SGWeberUK
Over 2m : weber.cem pyratop, rapid strength-gaining thin bonded topping. 2
Weber Technical Mortars for the Construction Industry
weber.tec EP mortar, high strength epoxy resin mortar for small quick patch repairs.
www.netweber.co.uk
Rev: 11/2014
Technical • Engineered • Strength
A solution for every application
3