Issuu

FIXMASTER BALEPACK

DEUTZ-FAHR FM 330 - FM 335 - FM 335 BP

DEUTZ-FAHR FIXED CHAMBER ROUND BALERS UNRIVALLED CAPACITY

TYPE

Straw

1 Hay

Haylage

Silage

Wet Silage

Moisture level

5 to 20%

5 to 18%

18 to 35%

35 to 70%

70 to 80%

TYPE

FM 330 OPTIFEED

● ●

FM 330 OPTICUT 14

●

FM 330 OPTIFEED

●

FM 330 OPTICUT 14

●

FM 335 OPTICUT 14

●

FM 335 OPTICUT 23

Crop

●

FM 335 BP OPTICUT 14

●

FM 335 BP OPTICUT 23

●

FM 330

●

OUR CORE VALUES: CAPACITY Our goal is to develop machines that will give a boost to the profitability of your company. High output is a key success factor for every baler. DEUTZ-FAHR round balers feature several unique points that will deliver this capacity to your company.

CONSISTENCY Perfect shaped, consistent round bales are the end-result which every customer is looking for. With over 30 years of experience in baling, our machines can produce exceptional high bale densities even in the most demanding conditions.

RELIABILITY To achieve maximum efficiency of your machine, an unmatched reliability is a must. DEUTZ-FAHR offers the most efficient and versatile range of balers available on the market designed with simple, but efficient techniques. This results in a minimum in down time and a machine that you can trust.

4-5 CROP INTAKE

CROP INTAKE DIFFERENT INTAKE SYSTEMS

CONSISTENT BALE SHAPE THE IMPORTANCE OF BALE SHAPE Consistent shaped bales bring more than just aesthetic appeal. A consistent filled bale represents quality in every form. Perfect firm round bales have less air in the bale, resulting in high quality feed!

OPTIMAL INTAKE PERFORMANCE Both OptiFeed and OptiCut models feature a cam-track pickup unit. The cam-track pick-up unit is designed to match the full capacity of the machine. The 230 cm wide pick-up delivers maximum ground adaption by its pendulum capabilities for optimal crop intake. The machine is capable of working in all swaths and will not let you down, even in the harshest conditions. The 5 tine rows and short crop roller ensure a fluent and clean raking job, even at high forward speed. To adapt the machine to your purposes, you have the choice between fixed and pivoting pick-up wheels.

INTEGRAL ROTOR - CROP CUTTING QUALITY The balers are equipped with the patented* Integral Rotor Technology with double tines made out of Hardox wear plates. Hardox combines extreme hardness and toughness with minimum wear of the rotor tines. The simple, maintenance free, short distance intake system guarantees an enormous throughput capacity at all times regardless of the various (crop) conditions. The short distance between rotor and pickup gives an outstanding crop flow. This force-fed intake makes higher forward speeds possible for outstanding productivity and reduced crop damage.

* Patent or patent pending in one or more countries

6-7 INTAKE SYSTEMS

When cutting the crop is not required, the OptiFeed intake system ensures a controlled and consistent crop flow to the bale chamber. (availability dependent on FM model)

OPTIFEED ROTOR The OPTIFEED rotor with double feeding tines, made out of Hardox wear plates, and integrated augers, provide a consistent flow of crop into the bale chamber. This rotor design helps even out windrows by moving them where needed for consistent bales every time.

CROP INTAKE NON-CUTTING VERSION

The DEUTZ-FAHR OC cutting systems are designed for unlimited intake capacity and excellent cutting quality. They are acknowledged by users as one of the best cutting systems on the market. The silage is guided and drawn to the knives in an early stage which improves flow and cutting performance and also prevents unwanted blockage. There are two different types of DEUTZ-FAHR OC cutting systems. (availability dependent on FM model)

CROP INTAKE CUTTING VERSION OPTICUT 14 The 14-knife OPTICUT cutting system provides a theoretical cutting length of 70 mm. Each single knife is spring protected against damage from foreign objects. The FM 335 & FM 335 BP offer group selection on the OptiCut 14, with the choice between 0, 4, 7, 7, or 14 knives in operation.

GROUP SELECTION

OPTICUT 23 (available for FM 335 & FM 335 BP) The Integral Rotor with the 23-knife OPTICUT system from DEUTZ-FAHR has the benefits of intensive cutting with a theoretical cutting length of 45 mm. Each single knife is spring protected against damage from foreign objects. With group selection the operator can choose to have 0, 7, 11, 12, or 23 knives in operation.

8-9 SECURITY SYSTEM

DOUBLE SECURITY SYSTEM

INTEGRAL ROTOR TYPE

FM 330

OPTIFEED WITHOUT CUTTING DEVICE

● (DropFloor)

OPTICUT 14 70 MM CUTTING LENGTH

● (DropFloor)

OPTICUT 23 45 MM CUTTING LENGTH

FM 335

FM 335 BP

● (DropFloor, Group Selection)

DROP-FLOOR The intake unit is protected by the main PTO clutch. In case of a rotor blockage, the floor and knives can be lowered hydraulically from the tractor cab. After the blockage is cleared, they can easily be brought back into work position.

ROTOR DISENGAGEMENT In extreme circumstances double security is provided by a standard hydraulic rotor disengagement clutch. The rotor drive can be hydraulically disengaged from the bale chamber drive, enabling the binding and discharge of the bale from the chamber. ROTOR DISENGAGEMENT

10-11 BALE CHAMBER

PERFECT BALE FORMATION

Producing many silage, hay and straw bales each season requires expert engineering of the machine. To compress the crop into bales with a consistent size and density, the baling process has to be as effective as possible while being gentle on the crop.

BALE CHAMBER The redesigned heart of the FM 330/335 balers consists of 18 PowerTrack rollers. The 18 renewed power track rollers have symmetrical profiles which generate exceptionally high density and reliable bale rotation in all crop conditions. All rollers are made of 3,2 mm thick high-strength steel which are roll-formed and laser-welded on one side for optimal durability. In addition, a minimum of space between the rollers reduces crop loss.

FAST TAILGATE DETECTION Strong tail-gate hydraulic cylinders in combination with a hydraulic lock ensures consistently sized bales with maximum bale density (Power Lock). A highly accurate tailgate sensor monitors the bale growth as from 80% to allow the driver to optimize the bale shape and density. The tailgate of FM 330/335 opens and closes in up to 4,5 seconds for maximum output, thanks to its stable design with torsion pipes.

POWERTRACK ROLLER

BUILT TO LAST HIGHEST DENSITY AND IMPROVED LIFETIME The rugged driveline with new gearbox design consists of a split driveline. The bale chamber drive on one side and rotor plus pick-up drive on the other ensuring a smooth operation and an even power transfer. The main drive and bale roller chains are made up of high-strength 100H (1Âź) chains which contribute to an improved life time. In addition to the 50 mm double raced bearings on the drive side main load points, trouble free baling in heavy conditions is guaranteed. All bearings have central greasing, a Beka Max automatic bearing greasing system is optional. The rollers have built in scrapers to push the material out and away from the bearings. BUILT IN SCRAPERS

All models are equipped as standard with a Beka Max continuous chain oiling system with sturdy and wide oil brushes on the chains to ensure perfect lubrication.

STURDY AND WIDE OIL BRUSHES

12-13 BALE SHAPE

FIRM BALE SHAPE OPTIMUM TYING PERFORMANCE

NET BINDING The net binder with active stretch technology assures a firm bale shape with constant high net tension throughout the entire binding cycle. The net is fed into the front of the bale chamber to secure an even and direct start. A second net roll storage guarantees sufficient net supply for a long working day. Changing the net roll can easily be done standing safely on the large platform.

DEUTZ-FAHRâ€™s innovative design allows constant tension to the net during the binding process. The net wrap system runs at 90% of the baleâ€™s rotational speed, to be able to stretch the net instead of braking. This provides an exact net tension in all crop and weather conditions. After leaving the bale chamber the bale will not expand and therefore holds its density. The net binding system provides excellent net spreading, even beyond the bale shoulders to prevent air pockets and improve the silage quality. The net stretch can simply be adjusted via the variable pulley and the number of net wraps can be adjusted from the terminal.

TWINE BINDING By use of the double twine binding system the binding cycle time is reduced to a minimum. In the twine binding cycle both of the twines start at the bale edge and overlap itself before moving to the centre of the bale. In the centre of the bale they overlap again, this ensures the twines are fixed and there are no loose ends. When required, the FM and FM BP can be equipped with an optional twine binding device.

TWIN TUBES FEED TWINE SIMULTANEOUSLY

CENTER TWINES OVERLAPPED

NO LOOSE ENDS AT EDGE OF BALE

14-15 BALING AND WRAPPING

BALING AND WRAPPING

A ONE-MAN OPERATION Two technologies from DEUTZ-FAHR combined in one machine, the FM BalePack. This easy to use machine is capable of working on even the steepest slopes and in all crop conditions. The DEUTZ-FAHR FM BalePack has a high capacity due to a fast and reliable bale transfer, high-speed twin-satellite wrapping unit and IntelliWrap.

FAST AND RELIABLE BALE TRANSFER To minimize idle time and maximize output, a rapid bale transfer is required. The side guide protection plates on the FM 335 BalePack ensure a rapid and secure bale transfer even when working in steep or sloping fields. The 4-belt wrapping table with 2 large rollers and 4 side cones provide maximum bale traction, even bale rotation and proper film overlap, regardless of the bale shape. The improved â€œtwin loading forkâ€? system offers faster bale transfer of up to 30%.

The first loading fork (in red) collects the bale as it leaves the bale chamber. The wrapping table is tilted forward; ready to receive the bale. Advantage: There is no possibility for the bale to roll off the rear of the wrapping table when facing up a steep slope. The second loading fork (in blue) transfers the bale onto the wrapping table. The tailgate shuts automatically, with the second loading fork still in raised position. Advantage: This saves time and also prevents any chance off the bale rolling forward into the tailgate when facing downhill. The wrapping table returns to its horizontal position and the second loading fork is lowered. The bale lies on the wrapping table supported by four wide belts and four lateral guide rollers. Advantage: Regardless of the bale shape, the table offers good support and allows perfect wrapping. The IntelliWrap wrapping system with closely mounted pre-stretchers rapidly wraps the bale, either in conventional or (optional) 3D mode. Advantage: Vertically mounted pre-stretch units ensure no grass is sprinkled between the layers of film during the wrapping process. This results in effective sealing between film layers and the highest possible silage quality. The low mounted table allows the wrapped bale to be gently discharged while driving, either automatically or manually.

16-17 INTELLIWRAP

INTELLIWRAP EXCELLENT WRAPPING

Greater management and control of the wrapping process is achieved by our unique IntelliWrap system. IntelliWrap uses sophisticated electronics and hydraulics to monitor the wrapping process and continuously controls the film overlap, allowing total flexibility. Depending on local circumstances, crop conditions and storage periods the amount of film layers (4, 5, 6, 7, 8, 9...) can simply be adjusted.

SELECTION OF 5 FILM LAYERS

THE BALE IS COVERED WITH 3 LAYERS INCREASING OF THE BALE ROTATION AND 67% OVERLAP SPEED

FINAL 2 LAYERS WITH 50% OVERLAP

Another feature of IntelliWrap is 3D wrapping. 3D wrapping is an intelligent and innovative way of applying stretch film to round bales. Key to the 3D wrapping process is its ability to distribute the total film quantity more uniformly and efficiently across the entire surface of the bale. By wrapping the cylindrical surface of the bale first more air is excluded and the bale shape maintained, even after long storage periods. The vulnerable bale shoulders are better protected compared to conventional wrapped bales. IntelliWrap provides well-shaped, tightly sealed bales and therefore higher quality silage.

ELECTRONICS ALWAYS IN CONTROL The DEUTZ-FAHR FM 330 is controlled by the AT 10 control box which provides clear and easy to read information. The DEUTZ-FAHR FM 335 and FM 335 BP offer additional comfort with ISOBUS compatibility. ISOBUS compatible tractors will not require a separate control box for these balers. Alternatively, the VT50 or CCI 200 monitor can be used with tractors that are not ISOBUS compatible. All balers offer clear operator settings, such as amount of net layers, automatic/manual binding start and selectable wrapping programs*. Operator information, such as fast bale growth detection (as from 80%) and bale counters (cut/uncut/ meters of net used) are also provided. The ISOBUS controlled FM 335 and FM 335 BP provide additional driver comfort such as adjusting the bale density from the comfort of the cab. The knives can independently be controlled from the dropfloor. *only FM 335 BP

AT 10 - FM 330

VT 50 - FM 335 & FM 335 BP

The in-cab control box provides clear and easy to read information and gives full command of the baling and binding process.

The DEUTZ-FAHR ISOBUS VT 50 terminal has a 14.5 cm (5.7â€™) color screen with outstanding clarity. Adjustments can easily be done by the touch screen and the large soft-touch keys on the sides. The VT 50 terminal can be used exclusively with the DEUTZ-FAHR ISOBUS machines.

CCI 200 - FM 335 & FM 335 BP The ISOBUS compatible CCI 200 terminal has a large 21.6 cm (8.5â€™) color screen with outstanding clarity. Baling adjustments can be easily made via the touch screen or by use of the intuitive, large, soft-touch keys. The CCI 200 terminal can also be used with other ISOBUS compatible machines on the market.

FULL VISIBILITY To provide optimal visibility and safety around the machine, the FM / FM BP can be equipped with a DEUTZ-FAHR group camera system. There are 2 versions available, one version is compatible with the CCI terminal, the other one consist of a separate monitor and a camera.

18-19 FEATURES AND OPTIONS

OVERVIEW MACHINE HIGHLIGHTS AND OPTIONS

ISOBUS GIVES OPTIMUM CONTROL IN COMFORT (FM 335 & FM 335 BP)

EASY STORAGE OF HOSES

3D WRAPPING FOR WELL-SHAPED, TIGHTLY SEALED BALES (OPTIONAL)

THE BALE RAMP ROLLS THE BALE AWAY FROM THE BALER ALLOWING FAST CLOSING OF THE TAILGATE AND INCREASED OVERALL CAPACITY (OPTIONAL)

LED WORK LIGHT (OPTIONAL)

CLOSED FILM ROLL CONTAINERS FOR 10 ROLLS

SPECIFICATIONS

FM 330 OPTIFEED

FM 335

FM 335 BP

OPTICUT 14 OPTICUT 14 OPTICUT 23 OPTICUT 14 OPTICUT 23

MACHINE DIMENSIONS Length

4.13 m

6.25 m

Height

2.46 m

Width

≥ 2.50 m

≥ 2.79 m

Weight

≥ 3300 kg

≥ 5400 kg

2.30 m

61 mm

Short crop pick-up roller

As standard

Pneumatic gauge wheels

As standard

Optional

PICK-UP Pick-Up width Number of tine rows Tine spacing

Pivoting guide wheels INTAKE Intake unit Rotor tines made out of Hardox wear plates Theoretical cutting length

Rotor with double tines

Cutting Rotor with double tines

As standard

≥ 70 mm

≥ 45 mm

≥ 70 mm

≥ 45 mm

Knife protection

Individual spring protected

Group selection knives

0-4-7-7-14

0-7-11-12-23

0-4-7-7-14

0-7-11-12-23

Hydraulic rotor disengagement

As standard

Drop floor

As standard

18 PowerTrack rollers

Diameter

1.25 m

Width

1.22 m

AT 10

ISOBUS

On baler density valve

Terminal

On baler valve

Terminal

As standard

Additional option

3D wrapping system

○

Film break sensor

●

400/60-22.5

●

500/45-22.5

○

560/45-22.5

○

600/40-22.5

○

BALE CHAMBER No. of rollers

OPERATION Control system Density adjustment Independent knife/ drop floor selection BINDING Net binding Twine binding WRAPPING UNIT FM 235 BP

TYRES

● = standard equipment ○ = optional equipment - = not available

Printed in the Netherlands - Order no.: ZPDJ07GB - 10-15

Dealer

The use of original lubricants and coolants is recommended. DEUTZ-FAHR LUBRICANTS

DEUTZ-FAHR is a brand of deutz-fahr.com

VARIMASTER

DEUTZ-FAHR 600 series

DEUTZ-FAHR VARIABLE ROUND BALERS CONSISTENT BALING AT ALL TIMES

TYPE

Crop

Straw

Hay

Haylage

Silage

Wet Silage

Moisture level

5 to 20%

5 to 18%

18 to 35%

35 to 70%

70 to 80%

TYPE

● ● ● ● ● ●

● ●

VM 665/695 OPTIFEED

●

VM 665/695 OPTICUT 14 OR 23

●

VM 665/695 BP OPTIFEED VM 665/695 BP OPTICUT 14 OR 23

VM 655/685 OPTIFLOW VM 655/685 OPTIFEED VM 655/685 OPTICUT 14 VM 660/690 OPTIFLOW VM 660/690 OPTIFEED VM 660/690 OPTICUT 14

●

● ● ● ● ● ● ●

● ●

●

● ● ● ● ●

● ● ● ●

OUR CORE VALUES: CAPACITY Our goal is to develop machines that will give a boost to the profitability of your company. High output is a key success factor for every baler. DEUTZ-FAHR balers feature several unique points that will deliver this capacity to your company.

ROUND BALES Perfect shaped, consistent round bales are the end-result which every customer is looking for. With over 30 years of experience in baling, our machines can produce these rock-hard bales.

RELIABILITY To achieve maximum efficiency of your machine, an unmatched reliability is a must. The DEUTZ-FAHR round balers are designed with simple, but efficient techniques. This results in a minimum in down time and a machine that you can trust.

4-5 PROGRESSIVE DENSITY

THE IMPORTANCE OF BALE SHAPE Consistent shaped bales bring more than just aesthetic appeal. A consistent filled bale represents quality in every form. Perfect firm round bales have less air in the bale, resulting in high quality feed!

PROGRESSIVE DENSITY –THE DEUTZ-FAHR SOLUTION The PROGRESSIVE DENSITY system has proven its value on all DEUTZ-FAHR VM balers. The system increases tension as the bale grows providing a firm bale with a tough outer shell.

HOW DOES IT WORK? As the bale grows within the bale chamber, the belt tensioning arm is subjected to steadily increasing resistance from two hydraulic cylinders and a spring tensioner. So as the diameter increases, the bale’s density does too. The result is a very firm bale with a moderate core – not too soft, not too hard. With a tougher outer layer, straw bales will be more tolerant to bad weather conditions, while silage bales will maintain their shape for improved stacking and easier handling.

CONSISTENT BALE SHAPE

CROP INTAKE DIFFERENT INTAKE SYSTEMS OPTIMAL CROP INTAKE All VM 600 models feature a cam-track pick-up unit. The camtrack pick-up unit is designed to match the full capacity of the machine. With an intake width of 230 cm, the machine is capable of working in all swaths and will not let you down, even in the harshest conditions. The new OptiFlow open throat models are equipped with an unrestricted 210 cm wide intake unit. The driven bottom and top roller combination brings maximum thrust to the crop flow for full capacity. To adapt the machine to your purposes, you have the choice between fixed and pivoting pick-up wheels.

INTEGRAL ROTOR - CROP FLOW CONTROL All VM balers, except balers with OptiFlow, are equipped with the patented* Integral Rotor Technology. With the exception of the VM 655-685, all Integral Rotor units are provided with tines made out of Hardox wear plates. Hardox combines extreme hardness and toughness with minimum wear of rotor tines. The simple, maintenance free, short distance intake system ensures even feeding regardless of the various (crop) conditions. The short distance between rotor and pick-up yields an outstanding crop flow. This force-fed intake makes higher forward speeds possible for outstanding productivity and reduced crop damage. *Patent or patent pending in one or more countries

6-7 CUTTING VERSIONS

NON CUTTING VERSIONS When cutting the crop is not required, the OptiFlow and OptiFeed intake systems ensure a controlled and consistent crop flow to the bale chamber. (availability dependent on VM model)

OPTIFLOW â€“ OPEN THROAT The OptiFlow open throat intake has an unrestricted intake unit for maximum capacity in all crop conditions. In heavier conditions, like big wide straw or silage windrows, the top roller is acting like a pre compactor which is powered by the primary driveline of the baler. There are no stuffer fingers or rotor tines which can disturb the flow and therefore limit the intake capacity. This generates a huge input potential and prevents blockages of the unit resulting in a high output and a minimum of downtime.

OPTIFEED ROTOR The OPTIFEED rotor with single feeding tines and integrated augers, provide a consistent flow of crop into the bale chamber. This rotor design helps even out windrows by moving them where needed for consistent bales every time.

CUTTING VERSIONS The OC cutting systems are designed for unlimited intake capacity and excellent cutting quality. There are two different types of DEUTZ-FAHR OC cutting system on the VM 600 series. (availability dependent on VM model)

OPTICUT 14 The Integral Rotor with the 14-knife OPTICUT system is designed to even out the swath and force-feed the crop into the baler for maximum throughput. The 14-knife OPTICUT cutting system provides a theoretical cutting length of 70 mm. Each single knife is spring protected against damage from foreign objects. With group selection the operator can choose to have 0, 4, 7, 7, or 14 knives in operation.

OPTICUT 23 The Integral Rotor with the 23-knife OPTICUT system from DEUTZ-FAHR has the benefits of intensive cutting and mechanical protection. The 23-knife OPTICUT system provides a theoretical cutting length of 45 mm. Each single knife is spring protected against damage from foreign objects. With group selection the operator can choose to have 0, 7, 11, 12, or 23 knives in operation. Mechanical group selection is available on VM 665-695 & BalePack models. Easy knife changing will provide you with true driver comfort INTEGRAL ROTOR TYPE

VM 655

VM 685

OPTIFLOW WITHOUT CUTTING DEVICE

VM 660

VM 690

VM 665

VM 695

VM 665 BP

VM 695 BP

●

OPTIFEED WITHOUT CUTTING DEVICE

●

● (Optional DropFloor)

● (DropFloor)

OPTICUT 14 70 MM CUTTING LENGTH

●

● (DropFloor)

● (DropFloor, Group Selection)

OPTICUT 23 45 MM CUTTING LENGTH

GROUP SELECTION

● (DropFloor, Group Selection)

The OPTICUT systems from DEUTZ-FAHR are acknowledged by users as one of the best cutting systems on the market

The silage is guided and drawn to the knives in an early stage which improves flow and cutting performance and also prevents unwanted blockage. As a result of the redesigned intake unit the power requirement of the round balers is decreased.

In case of a rotor blockage, the floor and knives can be lowered hydraulically from the tractor cab. After the blockage is cleared, they can easily be brought back into work position.

ROTOR DISENGAGEMENT When dropping of the floor is not sufficient, the rotor drive can manually be disengaged from the bale chamber drive, enabling the binding and discharge of the bale from the chamber. The rotor disengagement and drop floor technology ensure a quick clearance in case of a blockage.

8-9 BALE FORMATION

BALE FORMATION The bale chamber on the VM 600 series exists of 3 bale chamber rollers and 5 belts. The belts and rollers in the bale chamber provide fast, consistent core formation. In this pre-chamber, moderate or soft-cores can be chosen to meet the need of any operation. The redesigned bale chamber is equipped with a new heavier top chamber roller with aggressive profile resulting in less pollution to the front of the machine. The VM 600 series also has a reinforced tail gate bottom roller and top belt guide roller. A large smooth roller with driven cleaning roller in the front segment of the baler prevents crop build up and pollution of the machine. The VM 655 & 685 are provided with a large profiled roller and scraper combination.

VM 655 - VM 685

VM 660 - VM 690

VM 665 - VM 695 VM BALEPACK

Laced or endless

Endless + Second drive roller standard

The VM 665-695 balers can run on a higher baling density with up to 10% increase of bale weight in dry crops. The bale chamber is provided with a second belt drive to keep the belt turning in the heavy silage conditions. In addition, all new belt guide rollers in the bale chamber of the machine carry heavier bearings and BALE CHAMBER improved seals to VM 665 & VM 695 meet the highest VM 655 & VM 685 VM 660 & VM 690 VM 665 BP & VM 695 BP demands.

HEAVY BEARINGS AND SEALS

BUILT TO LAST VM 665-VM 695 & BALEPACK

DURABILITY All VM 665-695 models have increased overall driveline quality. The integration of cardan yokes in the drive axles, higher quality drive chains and belt track rollers contribute to an improved life time of the machine. The second belt drive roller guarantees a secure belt drive in all crop conditions.

HEAVY DUTY DRIVE CHAINS

CARDAN YOKES/CROSS JOINTS IN THE DRIVE AXLES SEPARATE KNIFE / DROP FLOOR CONTROL STEERED FROM THE TRACTOR SEAT

BEKA MAX CONTINUOUS CHAIN OILING SYSTEM

STURDY AND WIDE OIL BRUSHES

In addition, all VM 665 â€“ VM 695 (BalePack) models are equipped as standard with Beka Max continuous chain oiling system. The sturdy and wide oil brushes on the chains ensure perfect lubrication.

HIGH DENSITY HYDRAULIC SYSTEM SET-UP

10-11 BALE SHAPE

FIRM BALE SHAPE STRETCH TYPE NET BINDING SYSTEM

The binding cycle is crucial during baling. Less time required for binding means a higher output. On the DEUTZ-FAHR Balers the binding is placed at the front of the machine, resulting in a perfect view on the binding process from the tractor seat. To optimize this process, main adjustments can be done via the terminal. DEUTZ-FAHRâ€™s innovative design allows constant tension to the net during the binding process. The net wrap system runs at 90% of the baleâ€™s rotational speed, to be able to stretch the net instead of braking. This provides a constant net tension in all crop and weather conditions. After leaving the bale chamber the bale will not expand and therefore holds its density.

TWINE BINDING By use of the double twine binding system the binding cycle time is reduced to a minimum. In the twine binding cycle both of the twines start at the bale edge and overlap itself before moving to the centre of the bale. In the centre of the bale they overlap again, this ensures the twines are fixed and there are no loose ends. When required, the VM and VM BP also can be equipped with a combination of twine- and net binding.

TWIN TUBES FEED TWINE SIMULTANEOUSLY

CENTER TWINES OVERLAPPED

NO LOOSE ENDS AT EDGE OF BALE

12-13 BALING AND WRAPPING

A ONE-MAN OPERATION

FAST AND RELIABLE BALE TRANSFER To minimize idle time and maximize output, a rapid bale transfer is required. The side guide protection plates on the VM 665-695 BalePack ensure a rapid and secure bale transfer even when working in steep or sloping fields. The 4-belt wrapping table with 2 large rollers and 4 side cones provide maximum bale traction, even bale rotation and proper film overlap, regardless of the bale shape. The improved â€œtwin loading forkâ€? system offers faster bale transfer up to 40%. The first loading fork (in red) collects the bale as it leaves the bale chamber. The wrapping table is tilted forward; ready to receive the bale. Advantage: There is no possibility for the bale to roll off the rear of the wrapping table when facing up a steep slope. The second loading fork (in blue) transfers the bale onto the wrapping table. The tailgate shuts automatically, with the second loading fork still in raised position. Advantage: This saves time and also prevents any chance off the bale rolling forward into the tailgate when facing downhill. The wrapping table returns to its horizontal position and the second loading fork is lowered. The bale lies on the wrapping table supported by four wide belts and four lateral guide rollers. Advantage: Regardless of the bale shape, the table offers good support and allows perfect wrapping. The INTELLIWRAP wrapping system with closely mounted pre-stretchers rapidly wraps the bale, either in conventional or (optional) 3D mode. Advantage: Vertically mounted pre-stretch units ensure no grass is sprinkled between the layers of film during the wrapping process. This results in effective sealing between film layers and the highest possible silage quality. The low mounted table allows the wrapped bale to be gently discharged while driving, either automatically or manually. Advantage: When working on sloping grounds, the wrapped bale can be discharged while the net or twine is being applied on the following bale, saving time and increasing output potential.

14-15 INTELLIWRAP

BALING AND WRAPPING

Two technologies from DEUTZ-FAHR combined in one machine, the VM BalePack. This easy to use machine is capable of working on even the steepest slopes and in all crop conditions. The DEUTZ-FAHR VM BalePack has a high capacity due to fast and reliable bale transfer, high-speed twin-satellite wrapping unit and IntelliWrap.

EXCELLENT WRAPPING Greater management and control of the wrapping process can be achieved by our unique IntelliWrap. IntelliWrap uses sophisticated electronics and hydraulics to monitor the wrapping process and continuously control the film overlap, allowing total flexibility. Depending on local circumstances, crop conditions and storage periods the amount of film layers (4, 5, 6, 7, 8, 9...) can simply be adjusted.

1 1. SELECTION OF 5 FILM LAYERS 2. THE BALE IS COVERED WITH 3 LAYERS AND 67% OVERLAP 3. INCREASING OF THE BALE ROTATION SPEED 4. FINAL 2 LAYERS WITH 50% OVERLAP.

Another feature of INTELLIWRAP is 3D wrapping. 3D wrapping is an intelligent and innovative way of applying stretch film to round bales. Key to the 3D wrapping process is its ability to distribute the total film quantity more uniformly and efficiently across the entire surface of the bale. By wrapping the cylindrical surface of the bale first more air is excluded and the baleshape maintains, even after long storage periods. IntelliWrap provides well-shaped, tightly sealed bales and therefore higher quality silage.

16-17 ELECTRONICS

ELECTRONICS

All DEUTZ-FAHR VM 660-690 and VM 665-695 BP balers are ISOBUS compatible. ISOBUS compatible tractors will therefore not require a separate control box for the baler. Alternatively, the VT 50 or CCI 200 monitor can be used with tractors that are not ISOBUS compatible. Operator settings, such as bale diameter and knife activation, are accessed via the monitor. Operator warnings, such as left – right indicator, max bale size and operator information, including number of bales, are also provided.

AT 10 - NON ISOBUS COMPATIBLE* The in-cab control box provides clear and easy to read information and gives full command of the baling and binding process. An audible and visual alarm signals when the bale is ready. A choice of automatic or manual start of the tying process can be preselected. Adjustments like the number of netwraps are easily controlled from the tractor seat. AT 10 also provides a daily and total bale counter. * Standard on VM 655-685

VT 50** The DEUTZ-FAHR ISOBUS VT 50 terminal has a 14.5 cm (5.7”) color screen with outstanding clarity. Adjustments can easily be done by the touch screen and the large soft-touch keys on the sides. The VT 50 terminal can be used exclusively with the DEUTZ-FAHR ISOBUS machines.

CCI 200** The ISOBUS compatible CCI 200 terminal has a large 21.6 cm (8.5”) color screen with outstanding clarity. Baling adjustments can be easily made via the touch screen or by use of the intuitive, large, soft-touch keys. The CCI 200 terminal can also be used with many other ISOBUS compatible machines on the market. ** Compulsory choice

FULL VISIBILITY To provide optimal visibility and safety around the machine, the VM / VM BP can be equipped with a DEUTZ-FAHR camera system. There are 2 versions available, one version is compatible with the CCI terminal, the other one consist of a separate monitor and a camera.

FEATURES AND OPTIONS

STURDY AND WIDE OIL BRUSHES (VM 665 - 695)

SECOND BELT DRIVE

PENDULUM PICK-UP

DRIVELINE

BALE KICKER

PICK-UP WHEELS IN TRANSPORT POSITION

DIVERSE TIRE OPTIONS

18-19

SPECIFICATIONS VM 655

VM 685

VM 660

VM 690

OPTIFLOW OPTIFEED OPTICUT 14 OPTIFLOW OPTIFEED OPTICUT 14 OPTIFLOW OPTIFEED OPTICUT 14 OPTIFLOW OPTIFEED OPTICUT 14 BALE DIMENSIONS Diameter

80 cm - 160 cm

80 cm - 185 cm

80 cm - 160 cm

80 cm - 185 cm

120 cm

Width PICK-UP Pick-up width

210 cm

230 cm

210 cm

230 cm

210 cm

230 cm

210 cm

230 cm

4 rows

5 rows

4 rows

5 rows

Number of tine rows

4 rows

Tine spacing

61 mm

●

5 belts + 3 rollers

215 mm

Laced or Endless

Short crop pick-up roller Pneumatic gauge wheels BALE CHAMBER Bale formation Belt width Belts INTAKE

Intake unit

Rotor disengagement Theoretical cutting length Knife protection

Open Throat

Rotor

Cutting Rotor

Manual -

70 mm

Individual spring

Open Throat

Rotor

Cutting Rotor

Manual -

70 mm

Individual spring

Open Throat

Rotor with Cutting Hardox Rotor with tines and Hardox optional tines and drop ﬂ oor drop ﬂ oor

Open Throat

Manual

70 mm

Individual spring

Rotor with Cutting Hardox Rotor with Hardox tines and optional tines and drop ﬂ oor drop ﬂ oor Manual -

70 mm

Individual spring

Group selection BINDING

TWINE, NET, TWINE & NET

Double twine wrap/ capacity Net binding/capacity

●/8

Net and twine/capacity

●/8

○ /1+2

○ /1+1/8

OPERATION Control system

AT 10

ISOBUS

Density adjustment

On baler density valve

Independent knife/ drop ﬂ oor selection

On baler valve

WRAPPING UNIT 3D wrapping

Film end/break sensor

Single axle 11.5/80-15.3*

●

Single axle 15.0/55-17

○

●

Single axle 19.0/45-17

○

○/○

WHEELS AND AXLES

Single axle 500/45-22.5 Tandem axle 400/60-22.5 Tandem axle 500/45-22.5 Hydraulic/pneumatic brakes

○/○

DIMENSIONS Length

4.02 m

Width

2.46 m

Height

2.67 / 2.87 m

Weight Minimum tractor requirement**

2,500 kg

2,900 kg

3,050 kg

2,500 kg

2,900 kg

3,050 kg

2.550 kg

2,950 kg

3,100 kg

2,550 kg

2,950 kg

3,100 kg

45 kW (62 hp)

50 kW (67 hp)

60 kW (80 hp)

45 kW (62 hp)

50 kW (67 hp)

60 kW (80 hp)

45 kW (62 hp)

50 kW (67 hp)

60 kW (80 hp)

45 kW (62 hp)

50 kW (67 hp)

60 kW (80 hp)

● = standard equipment ○ = optional equipment - = not available * = AutoPLus ** = 185 with wrapper disconnected *** = Horsepower requirement may vary with different crops, conditions, and options used. Consult operators manual for proper tractor sizing.

SPECIFICATIONS VM 665

VM 695

VM 665 BP

VM 695 BP

OPTIFEED OPTICUT 14 OPTICUT 23 OPTIFEED OPTICUT 14 OPTICUT 23 OPTIFEED OPTICUT 14 OPTICUT 23 OPTIFEED OPTICUT 14 OPTICUT 23 BALE DIMENSIONS Diameter

80 cm - 160 cm

80 cm - 185 cm

80 cm - 160 cm

80 cm - 185 cm

120 cm

Pick-Up width

230 cm

Number of tine rows

5 rows

Tine spacing

61 mm

Short crop Pick-up roller

●

Pneumatic gauge wheels

●

5 belts + 3 rollers

215 mm

Width PICK - UP

BALE CHAMBER Bale formation Belt width Belts

Endless belts and second drive roller standard

215 mm

Endless belts and second drive Endless belts and second drive roller standard roller standard

Endless belts and second drive roller standard

INTAKE

Intake unit

Rotor disengagement Theoretical cutting length Knife protection

Rotor Cutting Rotor with Rotor with Cutting Rotor with Rotor with Cutting Rotor with Rotor with Cutting Rotor with with Hardox tines and Hardox Hardox tines and Hardox Hardox tines and Hardox tines and Hardox Hardox drop fl oor and group tines and drop fl oor and group tines and drop fl oor and group tines and drop fl oor and group tines and selection drop fl oor selection drop fl oor selection selection drop fl oor drop fl oor Manual -

Manual 70 mm

Individual Individual spring spring ●

Group selection

Manual

45 mm

●

Manual 70 mm

Manual

45 mm

Individual Individual spring spring ●

Manual

70 mm

Individual Individual spring spring

●

BINDING

Manual

45 mm

●

Manual 70 mm

45 mm

Individual Individual spring spring ●

●

TWINE, NET, TWINE & NET

Double twine wrap/ capacity Net binding/capacity

Net and twine/capacity

● /1+2

○ /1+1/8

OPERATION Control system Density adjustment Independent knife/ drop ﬂ oor selection

ISOBUS

Terminal

WRAPPING UNIT 3D wrapping

○

Film end/break sensor

●

WHEELS AND AXLES Single axle 11.5/80-15.3* Single axle 15.0/55-17 Single axle 19.0/45-17 Single axle 500/45-22.5 Tandem axle 400/60-22.5

●

Tandem axle 500/45-22.5

○

●/○

Hydraulic/pneumatic brakes

○/○

DIMENSIONS Length

4.02 m

6.50 m

Width

2.46 m

2.98 m

Height

2.67 / 2.87 m

Weight Minimum tractor requirement**

3,200 kg

3,250 kg

3,300 kg

3,200 kg

3,250 kg

3,300 kg

45 kW (62 hp)

50 kW (67 hp)

60 kW (80 hp)

45 kW (62 hp)

50 kW (67 hp)

60 kW (80 hp)

5,650 kg

5,700 kg

5,750 kg

68 kW (90 hp)

5.650 kg

5,700 kg 68 kW (90 hp)

5,750 kg

Printed in the Netherlands - Order no.: ZPDG07GB A 10-15

Dealer

The use of original lubricants and coolants is recommended. DEUTZ-FAHR LUBRICANTS

DEUTZ-FAHR is a brand of deutz-fahr.com