PRINTER SETUP
PRINTER & SCANNER SET UP & INSTALLATION INSTRUCTIONS VISIT DECOPAC.COM FOR PHOTOCAKE PRINTER MAINTENANCE VIDEOS!
NOTE: DO NOT CONNECT TO WI-FI DO NOT UPDATE FIRMWARE
CONTENTS
LIVE & IV
Shown: Epson XP-3200 for example only.
• • • • •
Printer Power Cable USB Cable Removable Output Tray Sample Pack of Ink Cartridges
* Remove all clear plastic protective wrap, foam and blue tape from the Printer.
Printer set up
1. Unpack the Printer completely. Remove all tape and Styrofoam inserts. 2. Extend the Input Tray on the back of the Printer. 3. Adjust the gray paper feed guides to their furthest position. 4. Extend the Printer’s Output Tray, then lift the tab up on the end of the extension. 5. Slide the removable Output Tray onto the Printer’s Output Tray extension ensuring the extension tab slides through the slot on the removable tray. 6. Connect the Power Cable into the back of the Printer. Note: It is key to plug into the surge protector. 7. Press and hold the Power button for 3 seconds to power on the Printer.