Issuu

Page 4 • Dairy Star • Saturday, September 22, 2012

TAILOR YOUR TRACTOR TO YOUR OPERATION New Holland T6 Series tractors are a natural fit wherever hard work is done. Every model features a clean-running engine with ECOBlue™ SCR technology that delivers a minimum 10% fuel savings*. And every model gives you the ultra-quiet comfort of the spacious Horizon™ cab to keep your productivity at maximum level all day. After that, you can specify your T6 tractor with the features you need to meet the exact requirements of your operation:

THERE’S A T7 TRACTOR JUST FOR YOU

New Holland T7 Series tractors deliver big productivity and top-ofthe-line comfort in tractors as low as 100 PTO horsepower. T7 tractors let you take control of your operating costs by improving your field performance and improving operator efficiency. There’s a model to match your specific needs: SELECT YOUR HP: EIGHT MODELS FROM 100 TO 195 PTO HP SELECT YOUR TRANSMISSION: CVT, SEMI OR FULL POWERSHIFT SELECT YOUR FRONT AXLE: STANDARD FWD, SUPERSTEER™ FWD OR TERRAGLIDE™ FWD SELECT YOUR OPTIONS: FRONT LOADER, FRONT 3-PT/PTO, FASTSTEER™, BLUETOOTH & MORE

CHOOSE YOUR ENGINE: 4-OR 6-CYLINDER, 90 TO 120 PTO HP CHOOSE YOUR TRANSMISSION: 16FX16R, 24FX24R, 17FX16R ECONOMY OR FAST MOVER CHOOSE YOUR HYDRAULIC SYSTEM: 18-GPM OPEN CENTER OR 26-GPM CCLS CHOOSE YOUR FRONT AXLE: STANDARD FWD, SHARP-TURNING SUPERSTEER™ FWD, OR ULTRA-SMOOTH TERRAGLIDE™ FWD CHOOSE YOUR REAR AXLE: 98” BAR AXLE OR HEAVY-DUTY FLANGE

IN STOCK:

T7.170 with auto command transmission T7.185

IN STOCK: T6.160, T6020

MODERN FARM EQUIPMENT

www.modernfarmequipment.com SAUK CENTRE, MN PIERZ, MN

FARM RAISED.

320-352-6543 • Hwy. 71 South

Store Hours: Monday-Friday 8-5, Saturday Seasonal

(formerly Morrison County Tractor & Equipment Inc.)

320-468-2161 • Hwy. 27 West

SKID LOADERS

USED EQUIPMENT SAUK CENTRE LOCATION

3) New L220, 2000# lift, cab, heat, AC, 12.00 tires ......................In Stock NH LX665, 1750# lift, new tires ................................$12,900

USED EQUIPMENT - PIERZ LOCATION

FORAGE New NH FR9050 ....................... In Stock Claas RU450, 15’ ....................... $27,500

TILLAGE

HAY

TRACTORS

NEW! T5070, Cab, FWA

IN NEW! T6020, Cab, FWA STOCK

NEW! NH T8.360,

front suspension, front duals, auto guidance

NEW! NH T9.560

NEW! NH TC35, FWA, Hydro, Loader- In Stock NEW! NH TC50, FWA, Shuttle F/R Trans, Loader- In Stock NH T8040, 305 HP, 1875 hrs., front susp., front duals, front/rear weights, all new rubber, auto guidance $164,500 Ford/Versatile 876, 4WD, Designation 6, 18.4x42/duals, 70% rubber, EZ-Steer 500, clean, consigned.............$41,500 CAT MT765B, EZ Guide 500 guidance, HID lights, front weights, 30” tracks................$134,900 IH 70 Hydro, wide front, excellent runner ........................$7,250

New Krone and New Holland hay tedders ..............................In Stock NH 1431 13’ discbine, drawbar swivel hitch ...............................$22,900 Bush Hog HM2408, 7’ 10” 3 pt. disc mower .................................$5,500 NH BR7090, net wrap, 5x6, rubber mounted pickup teeth, roller wind guard, 3000 bales, clean, 1 owner.......$27,900 NH 590 3x3, preser., consigned .................................$34,500 NH 565 small square baler, 72 belt thrower, NICE, low bales, consigned .................................$10,900 Massey Ferguson 124 small sq. baler, above avg. ..................$2,500 Sitrex RP2, 3 pt., 2 wheel windrow turner ................................$450 Pro Quality hay basket, 105 bales $2,650

New - Salford 31’ RTS HD Exteme .......................... In Stock New - Salford 6, 8, 12, 14 bottom plows .................. In Stock New - Salford 19’ HD disc ripper In Stock John Deere 3710, 8 bottom, clean ..................................... $29,500 Wilrich 2900 10 bottom. ex frame, coulters, good bottoms, paint faded, consigned .................... $13,900

AUGERS WE SELL WESTFIELD AUGERS! Westeld MK 12x111 w/”ex” hopper option, like new, consgined.... $28,500

MODERN FARM EQUIPMENT

320-352-6543 • Sauk Centre, MN

NEW DESIGN WITH FARM-PROVEN FEATURES

BALERS NH BR7090, net, twine, XS, 5x6 . $24,800 NH BR780A, AW, extra sweep pickup, 5x6 ........................................... $18,500 2) NH BR780, 5x6, auto. wrap, std. pickup ...............$14,900-$15,500 2) NH BR 740, 4x5, auto. wrap, wide pickup ..............$13,500-$14,000 NH BR740A, 4x5, net, twine, bale slice .................................. $18,500 NH 660, AW, crowder wheels, 5x6 $7,900 NH 565 Sq. baler, thrower ............ $7,800 AGCO NI 4855, net, twine, 5x5, consigned .................................. $8,300

HAY TOOLS NH HW345, S, P, discbine, 13’ head, 420 hrs........................................ $72,500 NH 1441 discbine, 15’, swivel .... $13,000 NH 1431, discbine, STD, 13’ ...... $13,600 NH 1475 haybine, 14’, 2300 HDR $10,500 NH 499 haybine, 12’, swing ......... $6,800 NH 1465 haybine, 9’ new cutterbar, nice ............................................ $8,500 NH 492 haybine, 9’, stub guards, good condition ........................... $5,700

NH 1038 bale wagon, 105 CAP .... $7,900

FORAGE JD 3975, 3RN, HH, Crop Pro ..... $29,600 Gehl 980 forage box, 16’ tnd. ....... $5,800

TRACTORS Ford 7740, FWA, cab, 90 hp, Allied 694 loader, 18.4x38, 380/28 fronts, all rubber 70% ........................ Call NH TC35DA, FWA, SS, hydro, cab, ldr., 35 HP .....................................$19,600 JD 2955, 2WD, open station, 18.4x38, 540/1000 pto, 2 remotes, clean .... $16,900

SPREADERS New NH M2080, 353cu. ft. ............In Stock New NH Hydra Box 550V, vert. beater, 442 cu. ft. ....................................In Stock

MODERN FARM EQUIPMENT

320-468-2161 • Pierz, MN

EXPERIENCE SALFORD DURABILITY In Stock! 14-Bottom 12-Bottom 8-Bottom 6-Bottom

Westeld Augers are available at

MODERN FARMq Ep QUIPMENT www.modernfarmequipment.com

SAUK CENTRE, ENTRE MN 320-352-6543 • Hwy. 71 South

PIERZ, MN

(formerly Morrison County Tractor & Equipment Inc.)

320-468-2161 • Hwy. 27 West

Every Salford plow uses durable frames with 8”x8” main beams that are built to last. The industry leading under frame and fore-aft clearance means your Salford plow is almost impossible to plug, keeping you in the drivers seat to cover more acres per hour.

MODERN FARM EQUIPMENT

www.modernfarmequipment.com Sauk Centre, MN - 320-352-6543 • Pierz, MN - 320-468-2161

Page 14 • Dairy Star • Saturday, September 22, 2012

Dairy Star • Saturday, September 22, 2012 • Page 19

“It gets them ready fast!” — Joe Engel

LUCK-E HOLSTEINS, Hampshire, Illinois THE ENGEL FAMILY: Dennis, Beth, Joe and Matt Milking 150 registered Holsteins Production: 24,192 m 4.3 1037 f 3.4 821 p 48 new EX & 57 new VG two-year-olds in past year Her udder on the day Luck-E Advent Asia went EX-91 at two weeks fresh in 2nd lactation. She was ready fast. Thanks Udder Comfort! Asia’s 2-04 365-day: 30,050 m 4.8 1436 f 3.3 994 p.

“Udder Comfort™ does an awesome job of softening udders, and it is gentle to the skin. That sets it apart. We use it on every fresh animal. It gets them ready fast,” says Joe Engel at Luck-E Holsteins, near Hampshire, Illinois. They had visitors from 17 countries during World Dairy Expo last year and have sold genetics to over 15 countries. Joe and Matt and parents Dennis and Beth are in partnership milking 150 registered Holsteins. They focus their genetics on balanced cows from consistent families in a freestall setup where good udders, strong front ends and high components are hallmarks.

“We like to be proactive, which is good for the cows and for high quality milk. We apply Udder Comfort twice every day for the first week after calving to soften and soothe and to keep the udders silky.” Quality Udders Make Quality Milk

Keep the milk in the system 1.888.773.7153 1.613.652.9086 uddercomfort.com Call to locate a distributor near you. For external application to the udder only after milking, as an essential component of udder management. Always wash and dry teats thoroughly before milking.

Dairy Star • Saturday, September 22, 2012 • Page 21

1.9% FOR 6 YEARS ON USED COMBINES 1.9% FOR 6 YEARS ON USED HAY EQUIPMENT

00 hrs 4 1 , 0 0 4 7 2004 JD ,000

$178 ,0

(1) = GLENCOE 320-864-5571 800-558-3759 4561 HWY 212, GLENCOE, MN 55336

(2) = HOWARD LAKE 320-543-2170 866-875-5093 5845 KEATS AVE. SW, HOWARD LAKE, MN 55349

(3) = STEWART 320-562-2630 800-827-7933 78412 CO RD 20, STEWART, MN 55385

(4) = ST. CLOUD 320-252-2010 800-645-5531 1035 35TH AVE. NE, SAUK RAPIDS, MN 56379

(5) = GLENWOOD 320-634-5151 888-799-1495 1710 N FRANKLIN GLENWOOD, MN 56334

(6) = SAUK CENTRE 320-352-6511 888-320-2936 1140 CENTRE ST, SAUK CENTRE, MN 56378

(7) = ALEXANDRIA 320-763-4220 888-799-1490 5005 STATE HWY 27 E, ALEXANDRIA, MN 56308

(8) = PAYNESVILLE 320-243-7474 866-784-5535 725 LAKE AVE. S, PAYNESVILLE, MN 56362

(9) = PRINCETON 763-389-3453 800-570-3453 3708 BAPTIST CHURCH RD, PRINCETON, MN 55371

81068

980 hrs 1 , 0 7 8 s a 2001 Cla 9,000

$14 9

84224

S, 642 hrs T S 0 7 7 9 2010 JD 57,500

$2 5

88806

Over 600 items with pictures updated daily • Go to www.midwestmachineryco.com UTILITY TRACTORS 9 - IH 84, 2wd, 2,971 hrs, ‘81...............................$11,750 2 - JD 5300, 2wd, w/ 510 ldr, 2,310 hrs, ‘93........$14,900 7 - JD 2030, 2wd, w/ 145 ldr, 5,200 hrs...............$10,900 9 - JD 2640, 2wd, w/ 146 ldr................................$16,900 5 - JD 5085M, MFWD, w/ 563 ldr, 2,100 hrs, ‘11.$40,500 9 - JD 5085M, MFWD, w/ 563 ldr, 500 hrs, ‘09....$45,000 5 - JD 5603, MFWD, w/ 542 ldr, 2,320 hrs, ‘08....$42,500 4 - JD 6320, MFWD, w/ 640 ldr, 6,296 hrs, ‘05....$45,000 6 - JD 6603, 2wd, 4,200 hrs, ‘04..........................$22,500 6 - JD 6603, MFWD, 6,000 hrs, ‘07......................$42,500 8 - JD 6430, MFWD, 560 hrs, ‘07.........................$68,000 COMBINES 6 - JD 9500, 3046 sep hrs, ‘89...........................$37,000 5 - JD 9500, 3064 sep hrs, ‘95...........................$37,500 9 - JD 9500, 2956 sep hrs, ‘94...........................$40,000 4 - JD 9510, 2631 sep hrs, ‘97...........................$59,000 2 - JD 9510, 3525 sep hrs, ‘98...........................$55,000 5 - JD 9550, 1675 sep hrs, ‘02...........................$89,000 1 - JD 9600, 3186 sep hrs, ‘90 ..........................$37,000 5 - JD 9600, 3481 sep hrs, ‘94...........................$39,500 6 - JD 9610, 2029 sep hrs, ‘98 ..........................$49,000 2 - JD 9610, 2000 sep hrs, ‘99...........................$59,500 4 - JD 9610, 2010 sep hrs, CM, ‘98 ...................$57,500 5 - JD 9650, 1609 sep hrs, ‘01.........................$105,000 5 - Case 2388, RWA, 1455 sep hrs, ‘06...........$142,000 5 - Case 2388, RWA, 917 sep hrs, ‘06.............$152,000 2 - Case 2588, 1112 sep hrs, ‘08.....................$190,000 3 - JD 9560STS, 1065 sep hrs, ‘05..................$155,000 2 - JD 9650STS, 1707 sep hrs, LL, ‘00..............$92,500 9 - JD 9650STS, 1595 sep hrs, RWA, ‘03........$127,000 1 - JD 9660STS, 1125 sep hrs, ‘05..................$149,500 6 - Gleaner A66, 516 sep hrs. ‘09....................$169,000 4 - JD 9670STS, 245 sep hrs, ‘11....................$245,000 5 - JD 9750STS, 3250 sep hrs, ‘01....................$79,000 5 - JD 9750STS, 2350 sep hrs, ‘00....................$89,000 3 - JD 9750STS, 1945 sep hrs, ‘01..................$109,000 2 - JD 9750STS, RWA, 1508 sep hrs, LL, ‘01 . $119,900 5 - JD 9760STS, RWA, 2447 sep hrs, ‘06 .......$145,000 3 - JD 9760STS, 1366 sep hrs, ‘08..................$155,000 7 - JD 9760STS, 2065 sep hrs, ‘05..................$137,500 8 - JD 9760STS, RWA, 1362 sep hrs, ‘04 ......$165,000 6 - JD 9760STS, RWA, 1145 sep hrs, ‘05........$169,500 3 - JD 9770STS, RWA, 1072 sep hrs, ‘08........$207,000 8 - JD 9770STS, 422 sep hrs, ‘10....................$232,000 2 - JD 9770STS, RWA, 642 sep hrs, ‘10..........$257,500 9 - JD 9770STS, RWA, 200 sep hrs, ‘11..........$290,000 6 - JD 9770STS, RWA, 112 sep hrs, ‘11..........$299,000 6 - JD 9770STS, RWA, 145 sep hrs, ‘11..........$299,000 6 - JD 9770STS, RWA, 86 sep hrs, ‘11............$299,000

6 - JD 9860STS, 1556 sep hrs, AutoTrac, ‘04. .$144,000 6 - JD 9860STS, RWA, 1585 sep hrs, ‘06........$174,000 6 - JD 9870STS, RWA, 1101 sep hrs, ‘09........$249,000 7 - JD 9870STS, RWA, 673 sep hrs, ‘08..........$249,000 3 - JD 9870STS, RWA, 720 sep hrs, ‘09..........$260,000 1 - JD 9870STS, RWA, 347 sep hrs, ‘11..........$309,000 2 - JD 9870STS, RWA, 184 sep hrs, ‘11..........$319,000 FORAGE EQUIPMENT 6 - JD 7250, RWA, 100 hrs, ‘12..............................Coming In! 6 - JD 6850, RWA, 2943 hrs, ‘98.....................$110,000 6 - JD 6850, RWA, 1650 hrs, ‘00.....................$137,500 6 - JD 7400, RWA, 1338 hrs, ‘04.....................$178,000 6 - JD 7800, RWA, 1358 hrs, ‘06.....................$195,000 6 - Claas 870, RWA, 1980 hrs, ‘01...................$149,000 9 - JD 3975, ‘06 .................................................$19,000 6 - JD 3975, ‘04, KP...........................................$24,500 6 - JD 645A, forage hay head, ‘03......................$17,500 6 - JD 645B, forage hay head, ‘07......................$21,850 6 - JD 645B, forage hay head, ‘05......................$22,850 6 - JD 6 Row, forage corn head..........................$22,500 6 - Kemper 6008, forage corn head...................$42,500 6 - JD 686, forage corn head, ‘00.......................$39,500 6 - JD 686, forage corn head, ‘06.......................$48,000 6 - JD 770, forage corn head, ‘11.......................$89,500 HAY EQUIPMENT 7 - MF 1745, rd baler, ‘08...................................$13,900 8 - NH BR780, rd baler, ‘05.................................$19,900 8 - Vermeer 605M, rd baler, ‘08.........................$18,000 8 - Vermeer 605M, rd baler, ‘08.........................$20,000 4 - JD 458S, rd baler, ‘07....................................$23,900 6 - JD 458S, rd baler, ‘11....................................$28,500 2 - JD 467, rd baler, ‘05......................................$19,900 4 - JD 467, rd baler, ‘05......................................$19,900 5 - JD 467, rd baler, ‘06......................................$22,900 7 - JD 468S, rd baler, ‘10....................................$26,500 6 - JD 468S, rd baler, ‘11....................................$28,500 5 - JD 468S, rd baler, ‘11....................................$28,500 4 - JD 468S, rd baler, ‘11....................................$29,900 8 - JD 468, rd baler, ‘10......................................$28,500 5 - JD 567, rd baler, ‘04......................................$19,000 6 - JD 567, rd baler, ‘03......................................$19,750 2 - JD 567, rd baler, ‘04......................................$20,000 6 - JD 568, rd baler, ‘11......................................$35,900 2 - JD 568, rd baler, ‘08 .....................................$36,500 7 - JD 568, rd baler, ‘11......................................$37,500 6 - JD 568, rd baler, ‘10......................................$37,500 7 - JD 568, rd baler, ‘12......................................$41,900 8 - JD 854, rd baler, ‘10......................................$28,500 8 - JD 4995, windrower, ‘03, 14.5’ hd................$75,000 6 - JD 4995, windrower, ‘05, 14.5’ hd................$72,500

6 - JD 4995, windrower, ‘07, 16’ hd...................$89,800 6 - Gehl 2412, MoCo, ‘04, 12’............................$11,000 7 - JD 735, MoCo, ‘07.........................................$19,900 2 - JD 735, MoCo, rolls, ‘05................................$19,950 2 - JD 735, MoCo, imp, ‘05................................$20,350 6 - JD 835, MoCo, ‘08, 11’ 6”.............................$23,000 6 - JD 945, MoCo, ‘99.........................................$12,500 9 - JD 946, MoCo, ‘00.........................................$16,900 5 - JD 946, MoCo, rolls, ‘11................................$29,800 SKID STEERS 2 - Bobcat S250, 1808 hrs, ‘09..........................$27,900 8 - Bobcat S650, 2200 hrs, ‘10..........................$29,000 6 - NH LX565, 2300 hrs, ‘95...............................$12,500 8 - Mustang 2054, 1460 hrs, ‘05........................$17,500 5 - Gehl 4240E, 36 hrs, ‘11................................$22,500 2 - JD 250, 692 hrs, ‘01......................................$15,500 6 - JD 260, 2360 hrs, ‘03....................................$18,500 6 - JD 317, 1700 hrs, ‘07....................................$17,500 1 - JD 320, 1208 hrs, ‘07....................................$19,900 4 - JD 325, 2447 hrs, ‘08....................................$23,700 8 - JD 325, 1400 hrs, ‘09....................................$27,500 3 - JD 318D, 79 hrs, ‘11.....................................$31,900 6 - JD 318D, 74 hrs, ‘12.....................................$32,900 7 - JD 318D, 251 hrs, ‘11...................................$29,900 6 - JD 320D, 454 hrs, ‘10...................................$26,900 4 - JD 320D, 675 hrs, ‘10...................................$29,500 2 - JD 320D, 320 hrs, ‘11...................................$32,900 6 - JD 320D, 34 hrs, ‘11.....................................$34,900 7 - JD 320D, 37 hrs, ‘12.....................................$35,900 4 - JD 320D, 21 hrs, ‘12.....................................$36,500 4 - JD 326D, 250 hrs, ‘11...................................$33,900 6 - JD 326D, 563 hrs, ‘10...................................$33,900 5 - JD 326D, 905 hrs, ‘11...................................$33,900 7 - JD 326D, 173 hrs, ‘10...................................$36,500 4 - JD 326D, 100 hrs, ‘11...................................$37,000 2 - JD 326D, 221 hrs, ‘11...................................$38,500 9 - JD 326D, 200 hrs, ‘11...................................$38,500 1 - JD 326D, 92 hrs, ‘12.....................................$39,200 4 - JD 326D, 35 hrs, ‘12.....................................$40,900 5 - JD 328D, 1635 hrs, ‘11.................................$31,500 1 - JD 328D, 515 hrs, ‘10...................................$35,900 4 - JD 328D, 628 hrs, ‘11...................................$36,900 8 - JD 328D, 450 hrs, ‘11...................................$38,900 8 - JD 332D, 150 hrs, ‘12...................................$44,500 6 - JD 332D, 20 hrs, ‘11.....................................$46,900 4 - JD 332D, 40 hrs, ‘12.....................................$46,900 4 - JD CT332, track loader, 2605 hrs, ‘05...........$28,000 4 - JD 319D, track loader, 180 hrs, ‘11...............$41,000 5 - JD 319D, track loader, 30 hrs, ‘11.................$41,500 5 - JD 323D, track loader, 225 hrs, ‘10...............$44,900 4 - JD 323D, track loader, 10 hrs, ‘12.................$49,500

(1) = GLENCOE (2) =HOWARD LAKE (3) = STEWART (4) = ST. CLOUD (5) = GLENWOOD (6) = SAUK CENTRE (7) = ALEXANDRIA (8) = PAYNESVILLE (9) = PRINCETON

D, 720 hrs 0 2 3 D J 0 1 20 00

$29,5 0

87064

8 2012 JD 56

$41,900

93607

s 5M, 515 hr 8 0 5 D J 9 0 20 00

$45,0 0

91560

347 Sep , S T S 0 7 8 9 2011 JD 9,000

$30 9

84434

Page 24 • Dairy Star • Saturday, September 22, 2012

The World’s Best TMR Supported by the World’s Best Dealer Network. Locate a dealer near you: www.supremeinternational.com

The NEW Supreme Triple Auger Mixer

The NEW Supreme Delivery Box The NEW Segue Range of Mixers

Drop by Booths EH 3007 - 3309 at the World Dairy Expo to see the new Triple Screw and the rest of our new product lines.

1.800.563.2038

www.supremeinternational.com | www.seguetmr.com

Dairy Star • Saturday, September 22, 2012 • Page 31

FARM INFORMATION STATION Joe Gill • Farm Director

SERVING CENTRAL MINNESOTA FOR OVER 50 YEARS Catch the Dairy Star’s Mark Klaphake with Joe Gill at 6:45 a.m. the 2nd & 4th Fridays of the month on KASM!

PO Box 160, Albany, MN • (320) 845-2184 • Fax (320) 845-2187

tfn

P BARN PEO O O H PL DAIRY, E H MACHINERY & HAY STORAGE

Even though it was a few years ago, A Little Bit of Sunshine I still remember the name of the cow that knocked me to the ground. Tinkerbell was given her nickname, Tinker Stinker, for a reason. At the time, she stood in the rst stall in the barn, which was good for her. Whenever we stood next to her, she reminded us she was there with a headbutt, then with the rough lick of her tongue. If we hadn’t noticed her by that time, she would start to eat our sweatshirt until we gave her a pat on head or a rub on the side. She was always looking By Krista M. Sheehan for attention. She loved it when visitors Assistant Editor came. It meant more people to pet her. While milking her, she always had to turn around to rst look at us. Then I needed to get up before she stepped she needed to lick the unit. When the on me. I have never felt so scared. She DHIA milk tester came around each was nearly standing over me and if she month, she was one of the cows we came any closer, it wouldn’t have been needed to check more often so she good. I shouted for two reasons – to try to prevent her from coming closer and wouldn’t knock the meter off. Even outside, she was a cow that to alert my dad of the situation if he easily stood out because of her demean- hadn’t already been aware. As I shoutor. When someone would walk through ed, I rolled to my side and hastily got the cow yard, Tinkerbell was usually back on my feet. My dad then chased one of the rst ones to realize it. After- Tinkerbell away and checked to make all, she needed a head rub. She would sure I was OK. Although the happening follow the person around even after only took seconds, it felt much longer given attention. Sometimes we needed to me. I was shaking and a little emoto shoo her away in order to get work tionally shook up, but I was physically done. She had never been a show cow; ne aside from the scrapes on my hands and large bruises on my knees. she was just naturally obnoxious. I had never had an experience like One afternoon, I was helping my dad lock the dry cows in the pasture so that even after growing up on a farm. we could let the milking herd out to the Sure, I’ve had times when I needed to bunk to eat. It’s a very routine chore and one I’ve done many Wh When someone would ld walk lk times. And I’ve been around cows since I can remember – through the cow yard, milking them, showing them or Tinkerbell was usually one of sorting them out in the pasture. I stood in one spot to guide the first ones to realize it. the cows around the corner while my dad followed them to ddart out off the h way in i the h pasture or keep them moving. Of course, Tinker- when my untrained cow or calf became bell was one of the last ones. The cows a little unruly, but I had never been as before her had no trouble turning the scared as I had been that day when Tincorner when I put up my hands to show kerbell nearly stepped on me. them they needed to go to the pasture. After the incident, I became a little Tinkerbell, however, had other plans. more cautious around the cows. I tried She saw me, but my upheld hands to always have someone with me out in didn’t help guide her in the right direc- the cow yard or pasture. When I had to tion. She wasn’t even looking to follow venture out myself, I made sure I had the others out to the green grass. She a sorting stick to lengthen the distance just kept speeding towards me. Realiz- between me and the cows. It didn’t ing her head was coming right for my last long for my slight anxiety to go chest, I knew I couldn’t stop her deter- away, but it did make me realize I need mined upcoming push. I turned around to remember that although cows are to escape over the fence, but tripped friendly, they’re still animals. For all over my feet. Then I felt her nose from people working with cows, we can’t let behind. our guard down and must be attentive As I fell to the ground, panic set while working with them. It’s important in. I just kept thinking, “Oh no, I might for people who work around animals to get hurt. This could be bad.” I stumbled remember that. I just hope others don’t to the ground, hitting my knees and have to be knocked down to realize it. hands hard on the concrete. Adrena- Stay safe! line immediately rushed through me and one thought popped into my head.

Tinker Stinker

Commercial Agri Buildings

Single and Truss Arch available from 20’-120’ wide 8-14 Gauge Gatorshield® in our buildings

ASK US ABOUT GOVERNMENT FU NDING FOR HAY STORAG E

Heaviest gauge steel in the industry Pre-engineered truss buildings

WE ALSO T SELL REPLACEMEN TARPS!

NELSON’S AGRI STRUCTURES

Dean Nelson • Grove City, MN • 320-857-2633, Cell 320-699-3297 Craig Moline • Harris, MN • 651-248-6302

RIVERSIDE HOOP BARNS, INC. US Hwy. 75 At IA/MN Stateline • Steen, MN 507-392-2870 • Fred A. Tilstra & Sons

LANGE CONSTRUCTION & CONCRETE Duke Lange • Swanville, MN • 320-290-0859

www.winklercanvasbldg.com

Dairy Star • Saturday, September 22, 2012 • Page 39

Pricing cornstalks

With a short hay crop in some parts of the country, corn stalks might nd more use as a feed resource as well as for bedding this year. I don’t know if that will make a higher price for corn stalks because there are probably a lot of corn stalks in elds across the country relative to the potential use. If it costs more to do the work, that probably means prices go up accordingly. We’ll see what happens in the market place. If you have use for corn stalks beyond what you bale on your own land, it’s better to talk with other corn growers now rather than waiting to see what happens to show up in the market later. We have pretty good eld drying conditions now. We should consider moisture variations across elds and be careful to wait for moisture in stalks to dry down to a safe level for baling. By Dan Martens Pricing corn stalks might be based on bedding value comU of M Extension pared to other options. Corn stalks are usually not as good at absorbing moisture and making a good bedding pack compared to good small grain straw. The price might be based on comparing feed value where they are used for feed. This might be done by comparing ration costs when using corn stalks with other ingredients to balance the ration – compared to the cost of rations using hay or other roughage feed material. Landowners who consider selling corn stalks off the farm are sometimes thinking about the value of nutrients like nitrogen (N), phosphorus (P) and potassium (K) that are being taken off the farm. Sometimes they work out agreements to bring the same amounts of N-P-K or dollar value back to the farm in the form of manure. It’s not easy to put a value on the organic matter component. One of the nutrient management charts I use says a ton of corn stover, on a dry matter basis, might have 22 pounds of nitrogen, 8 pounds of P2-O5 phosphorus, and 32 pounds of K2-O potassium. We can check N, P and K prices at a local fertilizer store and estimate a value. Phosphorus fertilizer has a nitrogen component as with an18-46-0. I deduct the value of the nitrogen from the phosphorus product based the nitrogen product I use – to get the value of the phosphorus in the fertilizer. There are some variables to consider. The N, P, K content can vary with growing conditions. If I’m pricing based on N-P-K content, I might have the material tested for nutrients and moisture. How much of the N, P and K in the crop residue will be available to the crop? I don’t have very good answer for that. If I were buying corn stalks or soybean straw, I might back off some on an N-P-K value because of this uncertainty. How much of the N, P, K is needed on the eld the crop residue is coming from or going to? A soil test helps to answer that. If phosphorus soil tests are very high, I wouldn’t be buying much phosphorus fertilizer, and the phosphorus in crop residue might have less value to me accordingly. I might look at the value of corn stalks in the market place. If someone is baling corn stalks and selling them, and I could buy them already baled for $15 or $20 or $25 per bale – then I might subtract what I think it costs me to bale them and what makes it worth my time to bale them at the neighbors, and what’s left is what I might be willing to pay the neighbor. Hauling costs might be a factor too. The same general concepts apply as we think about soybean straw, small grain straw and other crop residue material taken off elds. This process might involve weighing some bales, along with testing for nutrients and moisture if these factors are part of calculations. I think a value per bale or a value per acre ultimately is based on thinking about weight and quality factors. I might buy butter by the case or by the box, but it’s probably based on what I assume or know about the weight and quality. Sometimes I like to look at a couple of different approaches to looking at the value; and if I see some numbers in a similar kind of range, I’m more condent about how things are turning out. When you’re using thumbrules and general guidelines, it’s always good to make practical use of your own common sense and observation skills and to keep your own brain plugged in. With any estimates, measurements or testing that’s done, what counts at the end of the day is a price that a buyer and seller agree on - based on what makes sense to them in meeting their needs and goals. Please encourage family and neighbors to have a SAFE fall harvest season.

54” Panel Fans Now Available!

MIDWEST

MACHINERY CO.

www.midwestmachineryco.com

SAUK CENTRE, MN

Phone 320-352-6511 Toll Free 1-888-918-5053

SPECIAL

CLAAS 870, RWA 0% Financing for 5 Years PRICE

$149,000 Credit Approval Required

Your Forage Harvester Headquarters

Specializing in Self Propelled Forage Harvesters JD 7250, RWA, 2012, 100 hrs. .........Coming In JD 7800, RWA, 2006, 1358 hrs. .......... $195,000 JD 7500, RWA, 2005, 1400 hrs. .......... $197,500 JD 7400, RWA, 2004, 1400 hrs. .......... $178,000 JD 6850, RWA, 2000, 1650 hrs. .......... $137,500 JD 6850, RWA, 1998, 2943 hrs. .......... $110,000 JD 5460, RWA. ...................................... $28,500 Claas 870, RWA................................... $149,000

1.9%

Low Rate Financing

Easy-Rake Free Stall Groomer Easy-Clean • Improves animal Material used on comfort washed lime, • Reduces labor sawdust, manual sand and others • Reduces stall maintenance Unit foldsfree forward for narrow passage time Over 50onadjustable scraper • Works washed lime, settings sawdust, sand and others Multiple blade options • Unit foldscutting forward for narrow Multiple lengths available passages Improves animal comfort • Over 50 adjustable scraper Reduces manual labor settings Reduces free stall maintenance • Multiple cutting blade options time Short payback period • Multiple lengths available Patentpayback pendingperiod • Short • Patent pending

TESTIMONIAL TESTIMONIAL After using it the ﬁrst time we

Come see us at World Dairy on Oct. 4 for our

“What’s New in Cow Cooling” Seminar Guest Speaker: John

F. Smith, Ph.D

Space is limited, call now to RSVP! Also see us at booth #4201 www.schaeferfan.com Quality Since 1951 1.800.779.3267

couldn’t believe the cows “We love thehow scraper. It used the stalls. at It was unbelievable! saves least 2 hours ofAll the others we looked at are ﬁxed. This labor perhydraulics scraping. new one has andThis is very easy Free Stall Scraper paid It’s to maneuver around has the barn. very heavy duty.only There8 ismonths!” nothing we for itself after would change about it. We love it! John, Gary, Corey Hoffman Raliegh Mehrkens North-Creek, cows Mehrkens250 Dairy Chatﬁeld, MN

35591 Cty Rd 78 - Lake City, MN 55041 Ph: 651-345-3836 Fax: 651-345-0152 Email: metalsftp@earthlink.net Web Site: www.mftp.net

Page 40 • Dairy Star • Saturday, September 22, 2012

ORDER NOW. BUY EARLY. SAVE BIG.

MORE PRODUCTIVITY, DECREASED COSTS.

BRAINS AND BRAWN

NEW T8 SERIES TRACTORS GIVE YOU BOTH.

New T9 Series 4WD tractors give you the power you need and the advanced performance you want. High-capacity axles, industry-leading hydraulics, advanced transmission control and ultra-effi cient engines with EcoBlue™ technology are housed in a chassis size to match your needs. Brains and brawn. New Holland knows it takes both to get the job done right.

Cursor 9L engines feature New Holland EcoBlue™ technology using SCR to meet stringent Tier 4A emissions compliance. These engines feature ultimate “breathability.” They breathe clean, fresh air for optimal combustion and signifi cant performance advantages. Compared to previous models, T8 tractor operating costs are 10% lower—even when the cost of AdBlue® Diesel Exhaust Fluid (DEF) is taken into account.

UP TO 670 MAX ENGINE HP HEAVY-DUTY FRAME AND AXLES

INCREASED FUEL EFFICIENCY EXTENDED SERVICE INTERVALS ENGINE SPEED MANAGEMENT LOWER EMISSIONS

SIDEWINDER™ II ARMREST CONTROLS NEW INTELLIVIEW™ III TOUCH-SCREEN DISPLAY FULLY INTEGRATED INTELLISTEER™ GUIDANCE OPTION

Stop By One Of These New Holland Dealers For Details... TJOSVOLD EQUIPMENT

A & C FARM SERVICE INC.

ARNOLD’S EQUIPMENT INC.

MELROSE IMPLEMENT INC.

SCHLAUDERAFF IMPLEMENT LITCHFIELD, MN

GRANITE FALLS, MN

ADKINS EQUIPMENT INC.

FRANZEN SALES & SERVICE

MODERN FARM EQUIPMENT

TITAN MACHINERY

TRUEMAN-WELTERS INC.

PAYNESVILLE, MN

DETROIT LAKES, MN

ST. CLOUD, MN

FORT ATKINSON, IA

MELROSE, MN

SAUK CENTRE, MN PIERZ, MN

ALBERT LEA, MN THIEF RIVER FALLS, MN WINGER, MN

BUFFALO, MN

WERNER IMPLEMENT

VERMILLION, MN