D6115FL - Fork Grabber Assembly
Torque Tube
Anti-Roll Back System
Canopy
ACCESSORIES & TOOLS
Ladder
Front Bumper Arm Pocket
Body Service Lift
Accessories & Tools
ELECTRICAL
Lights
Wire harnesses
Electrical Components
CYLINDERS
Cylinders
HYDRAULICS
Body Hydraulic
Oil Reservoir Filter
Battle Motor LET II Pump
Top Door Hydraulic Tubes
Packer Hydraulic Tubes
Fork Hydraulic Tubes
Hydraulic Clamps
Pressure & Return Tubes
Arm Hydraulic Tubes
Accessory Hydraulic Tubes
Tailgate Hydraulic Tubes
Main Hydraulic Valve
Packer Exhaust Manifold
PTO & Pump
Driveshaft
DECALS & PLACARDS
Safety Decal and Placement
Placards
RESOURCES
QR Code Quick Links
ABBREVIATIONS
TG
RETURN POLICY
You must contact your sales representative prior to obtaining a Return Authorization.
The Return Authorization (RA) will be valid for 45 days from the issue date. After 45 days Pac-Tech, A Division of Con-Tech Manufacturing, Inc. will close the RA and it will no longer be valid. Please mark the RA number clearly on all shipping cartons and paperwork. When requesting an RA number/form, please be prepared to provide the following information:
• Customer name
• Customer shipping address
• Customer billing address
• Customer phone number
• Customer contact
• Customer contact e-mail
• Equipment type and/ or serial number
• Original sales order or purchase order number
• Reason for return
Having this return policy in effect will ensure that all of our customers receive their parts credit(s) in an efficient and timely manner. Returns are subject to a 15% restocking fee.
REPLACEMENT PARTS WARRANTY
Pac-Tech, a division of Con-Tech Manufacturing, Inc., a Minnesota corporation, hereinafter referred to as Pac-Tech, warrants replacement parts sold by Pac-Tech to be free from defects in material and workmanship under normal use and service for a period up to one year. Pac-Tech’s obligation under this warranty is limited to repairing and replacing, at Pac-Tech’s opinion, any parts which are returned to Pac-Tech’s factory at 65740 Hwy 56, Dodge Center, MN 55927. Transportation charges must be prepaid by the customer. Parts must be returned within 30 days after date of delivery to customer. This warranty covers only parts which, upon examination by Pac-Tech, are found to be defective in material or workmanship. Such repair or replacement of parts under this warranty will be made by PacTech without charge for such parts. Under no circumstance will Pac-Tech be under any further liability with respect to such warranty. Replacement parts purchased by Pac-Tech from other manufacturers shall be covered by that manufacturer’s warranty.
Pac-Tech warranty shall not apply to parts that have been subject to misuse, negligence, accident, or which has been repaired or altered without Pac-Tech’s prior knowledge and consent.
IN NO CASE SHALL PAC-TECH BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, OR INDIRECT DAMAGES OF ANY KIND.
Pac-Tech makes no other expressed or implied warranties of fitness or merchantability or any other warranties, either expressed or implied. Any implied warranty of merchantability or fitness for a particular purpose which exceeds the forgoing warranty is hereby disclaimed by Pac-Tech. There are no warranties which extend beyond the description on the face hereof.
The Ultimate®, Mini Bandit®, Extreme Duty, The Bandit®, Pac-Tech®, and Con-Tech Manufacturing, Inc.® are trademarks that are property of Con-Tech Manufacturing, Inc., Dodge Center, Minnesota. This publication is copyrighted by Con-Tech Manufacturing, Inc. and should not be duplicated or used in any form electronically or otherwise .
COMPATIBILITY OF PARTS & USAGE
Items in this book are marked with PTM (Pac-Tech Manufacturing, Inc.), mtm (McNeilus Truck and Manufacturing, Inc.), or PTM/mtm, which indicates the compatibility and usage of the individual parts.
Pac-Tech manufactures OEM (Original Equipment Manufacturer) fabricated metal replacement parts only for PTM Packers. The fabricated metal replacement parts referred to with respect to mtm packers in this book are “Will Fit” parts for mtm packers manufactured by Pac-Tech. They are not OEM parts (i.e., parts manufactured and/or supplied by McNeilus Truck and Manufacturing, Inc.) for mtm packers. Pac-Tech makes no representation that any replacement parts referred to in this book are manufactured by McNeilus Truck and Manufacturing, Inc.
AFTERMARKET PARTS TERMS AND CONDITIONS
Please review Pac-Tech Aftermarket Parts Terms of Sale. Please contact Pac-Tech, A Division of Con-Tech Manufacturing, Inc., hereinafter referred to as Pac-Tech, with questions or for further information.
1.1 PRICES
Every term and provision of prior parts quotations and of the pricing and delivery time above is subject to, and customer agrees to be bound by, changing conditions resulting from: prior sales, fluctuations in currency exchange rates, material surcharge assessments, fuel surcharge assessments, component pricing escalations, material pricing escalations, labor cost escalations, lack of timely component availability, shipper limitations, vendor limitations, ConTech factory capacity, and force majeure events.
• Prices do not include state sales tax, excise tax or any other government charge upon production, sale, or shipment of goods, now imposed or hereafter becoming effective, which shall be added when, as, and if applicable.
1.2 TERMS OF PAYMENT
Pac-Tech’s requested methods of payment are check and ACH. Credit cards are accepted as an alternative payment method but will be subject to a 3.3% convenience fee. Accepted credit cards are Visa, MasterCard, American Express, and Discover.
• Customer accounts are initially set up with PIA (Payment in Advance) terms. Pac-Tech’s PIA terms state the invoice will need to be paid before the order is shipped.
• Upon approval of credit application, customers’ accounts will have Net 30 terms. Please request a credit application from your sales representative or Pac-Tech’s main office.
• A 12% annual (1.0% per month) finance charge applies to all invoices past their due date. Customer accounts may be placed on purchasing hold if they have an overdue invoice.
• Overpaid invoices will be turned into credit memos and sent to the customer. Credit memos may be used in your future payments or paid back upon request. All credit memos over 90 days will be issued back to the customer.
• The customer authorizes Pac-Tech to exercise peaceful possession over such items that have not been paid for in full at Pac-Tech’s discretion.
1.3 TAX AND EXEMPTION CERTIFICATES
It is the customer’s responsibility to know if they are tax exempt based on their ship-to state’s laws.
• It is the customer’s responsibility to send Pac-Tech a complete, current, and correct copy of their tax exemption certificate or reseller’s permit (dependent on your state’s laws).
• If Pac-Tech does not receive a copy of the customer’s completed exemption by the first of the month following the date of the invoice, Pac-Tech will expect the tax to be paid by the customer.
1.4 LIMITED WARRANTY ON AFTERMARKET PART SALES
Equipment or accessories purchased by Con-Tech from other manufacturers shall be covered by that manufacturer’s warranty.
Pac-Tech’s obligation under warranty is limited to repairing or replacing, at Pac-Tech’s discretion, any parts which are returned to Pac-Tech’s factory at 65740 Hwy 56, Dodge Center, Minnesota 55927. Transportation charges must be prepaid by the customer. This warranty covers only parts which, upon examination by Pac-Tech, are found to be defective in material or workmanship. Such repair or replacement of parts under his warranty will be made by PacTech without charge for such parts. Under no circumstances will Con-Tech be under any further liability with respect to such warranty.
• In no case shall Con-Tech be liable for consequential, incidental, special, or indirect damages of any kind.
• Con-Tech warranty shall not apply to components that have been subject to misuse, negligence, accident, acid use, liquid nitrogen exposure, contamination or which has been repaired or altered without Pac-Tech’s prior knowledge and consent.
• Pac-Tech makes no other expressed or implied warranties of fitness or merchantability or any other warranties, either expressed or implied. Any implied warranty of merchantability or fitness for a particular purpose which exceeds the forgoing warranty is hereby disclaimed by Pac-Tech. There are no warranties which extend beyond the description on the face hereof.
• The customer’s exclusive remedy for breach of warranty as a result of defects in material and workmanship shall be as set forth herein. Any action for breach of warranty must be commenced within 30 days after the cause of action shall accrue, and no such action may be maintained which is not commenced within such period. Pac-Tech neither assumes nor authorizes any other persons to assume for it any liability in connection with its equipment.
• Used parts are not covered by any warranty terms continued herein.
TERMS FOR PARTS COVERED UNDER LIMITED WARRANTY
• Electrical components, including but not limited to, electrical controllers, cables, switches, solenoid valves, and lights are warranted 90 days against defects in materials and workmanship.
• Other aftermarket parts, excluding electrical components, including but not limited to, gauges, harnesses, hydraulic cylinders, air cylinders, hydraulic pump/motors, gearboxes, and hoses are warranted for one year against defects in materials and workmanship.
1.5 CANCELLATIONS
In the event of order cancellation, labor and materials costs allocated towards the agreed upon order shall be the sole responsibility of the customer and charged as such. This includes (but not limited to) raw materials, shop supplies, goods in the process of manufacture, any labor involved in the assembly of the order.
• Pac-Tech reserves the right to cancel the entirety of an order in the event of a partial cancellation by the customer.
1.6 RETURNS OF ORDER
You must contact your sales representative to obtain a Return Authorization. Parts must be returned within 30 days after date of delivery to customer. The Return Authorization (RA) will be valid for 45 days from the issue date of the invoice. After 45 days, Pac-Tech will close out the RA and it will no longer be valid. Please mark the RA number clearly on all shipping cartons and paperwork.
• Returns are subject to a 15% restocking fee.
1.7 FREIGHT CLAIMS/CHARGES & ASSESSMENTS
Pac-Tech is not responsible for freight rates charged by carriers. All parts sold by Pac-Tech are F.O.B. Origin and ships standard ground service unless otherwise specified by the customer.
• If a shipment arrives damaged in transit, the customer must note the damage on the Bill of Lading and contact Pac-Tech immediately.
• Pac-Tech is not responsible for delays resulting from strikes, accidents, negligence of carriers or other causes beyond our control.
• If Pac-Tech receives any additional fees or assessments for shipping, including but not limited to, expedited freight, guaranteed delivery, and liftgate usage, the customer will be responsible for those fees incurred. PacTech will send out a freight-only invoice for the assessed charges.
1.8 PRODUCT CHANGES
Pac-Tech reserves the right to make changes to patterns, design, or materials at any time without prior notification or obligation to make corresponding changes in previous models.
UPDATED AS OF 01/09/2026
Pennsylvania (Northeast) northeast@ptpackers.com
Texas (South Central) dallas@ptpackers.com 940-377-0603
CLEVELAND
Ohio (Northeast) northeast@ptpackers.com 440-946-3322
ATLANTA
Georgia (Southeast) southeast@ptpackers.com 770-229-1773
DODGE CENTER
Minnesota (Midwest) dcsales@ptpackers.com 507-374-2239
HOUSTON
Texas (South Central) houston@ptpackers.com 832-688-8449
SAN BERNARDINO
California (Western) west@ptpackers.com 909-478-0017
STREET SIDE
DAILY/WEEKY PREVENTATIVE MAINTENANCE
ADDITIONAL MAINTENANCE
5270784 Prop Stand Weldment
Prop Pin
5270930 7 Yd Tailgate Weldment
5271324
Light Box, 3 Hole with side marker LH
*Marker Light Out / Drain Holes Down to Determine Left Hand or Right Hand
5271325 Light Box, 3 hole with side marker RH
9650003 M-Style, Tailgate Seal, Hydraulic Lock
9250001
9250002
5270093
5271458
5270954
5271509
BUMPER
TOOLBOX BUMPER
TAILGATE LATCH
Tailgate Roller Latch Pin 5070788
Tailgate Roller Latch
Tailgate, Latch Post Rear 5070786
Tailgate Cylinder Pin Weldment GEN 1
5072411
Tailgate Cylinder Pin Weldment GEN 2
5072410 TG Cylinder Washer (9250002 Cylinder)
Tailgate Cylinder, 3” Bore 5270077
9250632 Washer - Hardened Flat 1” 14
5271444
Prop Pin 9250630 Bolt - GR 8 Hex Cap Screw 1-1/4 x 3-1/2 9250631 Lock Nut - Class C 1” 14
Tailgate, Locking Pin Roller Keeper
5271465
Tailgate, Latch Plate, Double Hook
Switch - Prox, 3 wire, Long Barrel, 18MM 5070787
Tailgate Cylinder, 2.5” Bore
5071583 Body, Tailgate, Prop Arm
TAILGATE SIDE LOCK
GEN 1. Round tooth; not as pointed at tip; has square bottom corner
GEN 2 Noticeably sharper tip; has round bottom corner
5270956
Tailgate, Slide Lock Plate GEN 1
5271347
Tailgate, Slide Lock Plate GEN 2
5270077
Tailgate Cylinder Pin Weldment GEN 1
5270958
Hydraulic Lock, Retainer Pin Weldment
5072411
Tailgate Cylinder Pin Weldment GEN 2
715008D
Switch - Overmolded Prox, CTM w/ Deutsch Connector
9150000
Switch - Prox, 3 wire, Long Barrel, 18MM
5072410
TG Cylinder Washer (9250002 Cylinder)
9250001
Tailgate Cylinder, 2.5” Bore
9250002
Tailgate Cylinder, 3” Bore
