West 21 2013 by Construction Equipment Guide

$3.00

Published Nationally

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

Western Edition

www.constructionequipmentguide.com

October 19, 2013 • Vol. IX • No. 21 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

Inside

Insolvency Crisis Looms as Map-21 Law Expires in 2014

ICUEE 2013 Attendance Impresses M any...10

daily flights, or Miley Memorial Field Airport located in Big Piney, Wyo., with its dozen landings and take-offs each day. New air runway surfaces must meet the same smoothness standards. The county-owned, Miley Memorial Field Airport recently received a muchneeded rebuild and widening of its lone

As the Highway Trust Fund (HTF) lurches toward its fifth insolvency crisis in seven years when the MAP-21 surface transportation law expires in September 2014, federal surface transportation investment to the states could be dealt a crippling blow unless Congress acts, the American Road & Transportation Builders Association (ARTBA) said at a Sept. 25 hearing on Capitol Hill. Testifying before the Environment & Public Works Committee, ARTBA President Pete Ruane told senators that federal highway funds account for nearly 52 percent of state roadway and bridge capital outlays annually. Eleven states rely on the program for 70 percent or more of their road and bridge capital improvements, and 20 states rely on federal reimbursements for 50 to 69 percent of their capital outlays. For the remaining 19 states, federal investment accounts for 35 to 49 percent of their highway construction activities. “Although the amount of reliance on federal funds for needed road and bridge improvements may vary state by state, it is clear that for the vast majority of states the effectiveness of their highway construction programs are heavily dependent on a strong and reliable federal partner,” Ruane said. According to a July Congressional Budget Office (CBO) report, the HTF would be unable to support any new highway and transit investments in fiscal year 2015. “We should be clear that the continuing saga with the Highway Trust Fund’s solvency is not the result of runaway spending,” Ruane said. “In fact, federal highway investment is less today than it was in 2011.” The root cause of this problem, he said, is not declin-

see AIRPORT page 56

see HTF page 55

The county-owned, Miley Memorial Field Airport recently received a much-needed rebuild and widening of its lone double-taxiway airstrip. PIRTEK Welcomes Guests to Open House...13

ConExpo Retro See page 14 for an ongoing series of highlights from past ConExpos as they were reported in the pages of CEG.

Table of Contents ................4

Paver Does Double Duty on Double-Taxiway Airstrip By Jeff Winke SPECIAL TO CEG

It makes no difference… the regulations are enforced regardless. The FAA expects new airstrips to meet its stringent standards whether it’s Hartsfield-Jackson Atlanta International Airport, the world’s busiest airport with approximately one million

Recycling Section ...... 17-27 Truck & Trailer Section ........ ......................................33-35 Attachment & Parts Section ......................................37-41 Business Calendar ............44 Auction Section ..........50-59 Advertisers Index ..............58

ASA’s Bigane Speaks Out Against Payment Abuses ASA Past President Anne Bigane Wilson made a radical statement about subcontractor payment abuses at the ENR Risk & Compliance Summit on Sept. 20 in New York City — the purpose of which was to discuss how contractors manage risk, including subcontractor default. “Construction subcontractors

and suppliers should get paid promptly and in-full for work properly performed,” she said. “While it may seem silly for that to be a radical statement, it is a sad fact that in our construction industry many subcontractors and suppliers do not routinely get paid promptly — and sometimes not at all — for their work.”

Richard Korman, Engineering News-Record’s managing senior editor of ENR.com, noted in his “Views Differ from Places on the Payment Flow-Chart” that Wilson’s “conversation seemed to have as much to do with morality and the public good as with management. The prompt payments that subs need to stay alive, she

implied, were just as important as the risks to the prime contractor of subs going belly up,” Korman wrote. Wilson, who is president of both Bigane Paving Co., a fourthgeneration family firm specializing in asphalt paving, and Ogden Avenue Materials Inc., an asphalt see ASA page 55

Page 2 â€˘ October 19, 2013 â€˘ www.constructionequipmentguide.com â€˘ CONSTRUCTION EQUIPMENT GUIDE

Contact

Komatsu Distributor

Allen Stokke, Used Equipment Manager 602-509-4031 astokke@roadmachinery.com New California Location 3539 San Gabriel River Pkwy Pico Rivera, CA 90660 562-699-6767

Remarketing Certified

www.roadmachinery.com/equipment

Wirtgen â€˘ Hamm â€˘ Vogele â€˘ Kleemann â€˘ Finn â€˘ Terex-Fuch Crawler Dozers 2012 KOMATSU D375A-6, EMD009839 ......................................................................$925,000 2012 KOMATSU D65EX-17, EMD009874 ....................................................................$225,000 2007 KOMATSU D65PX-15EO, EMD009563 ................................................................$100,000 2008 KOMATSU D85EX-15EO, EMD009092 ................................................................$140,000 2008 KOMATSU D51EX-22, EMD007022 ......................................................................$98,000 Hydraulic Excavators 2005 KOMATSU PC400 LC-7L, EMD000247 ..............................................................$100,000 2009 KOMATSU PC88MR-8, EMD009763 ......................................................................$90,000 2007 KOMATSU PC200LC-8, EMD004350 ..................................................................$110,000 2007 KOMATSU PC220LC-8, EMD009419 ..................................................................$120,000 2008 KOMATSU PC220LC-8, CONSIGNMENT............................................................$139,000 2010 KOMATSU PC200LC-8, EMD007124 ..................................................................$110,000 Wheel Loaders 2011 KOMATSU WA250PZ-6, EMD009749 ..................................................................$139,000 2007 KOMATSU WA320-5L, EMD009420 ....................................................................$120,000 2007 KOMATSU WA500-6, EMD007623 ..........................................................................$CALL

SAVE TIME â€˘ SAVE MONEY â€˘ SAVE LABOR â€˘ SAVE OIL â€˘ No tools required â€˘ No expensive hardware needed â€˘ No more rags stuffed into hoses â€˘ No more messy plastic caps â€˘ The ultimate contamination control tool â€˘ One hand installation â€˘ Eliminate hydraulic oil spills & clean up â€˘ Quick installation & ease of usage â€˘ Safe for personnel & environment â€˘ Industry acclaimed â€˘ 100% Made in USA For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

2011 KOMATSU WA320PZ-6, EMD009302 ..................................................................$125,000 2006 KOMATSU WA380-5, EMD008944 ......................................................................$105,000

Announcing the 2014 HCEA Calendars

Available

NOW! Maay Photo (Cat p

' 'FBUVSJOH GVMM QBHF CMBDL XIJUF QIPUPHSBQIT DBSFGVMMZ FBUVSJOH GVMM QBHF CMBDL XIJUF QIPUPHSBQIT DBSFGVMMZ scanned scanned and and restored restored from from rrare are o originals riginals depicting depicting construction construction FRVJQNFOU GSPN BMM FSBT FRVJQNFOU GSPN BMM FSBT The The o only nly ccalendar alendar o off this ttype y pe o oďŹ€ered! ďŹ€ered!

O Order rder yyour our 2014 H HCEA CE A C Calendar alendar ttoday! oday! Order online at www.hcea.net or order by phone at 419-352-5616 with your Visa, Discover, or MasterCard, or fill out the form below. 2014 HCEA Calendar Order Form (with HCEA imprint)

Dealers! Contractors! Producers!

Please send _____ copy(s) of the 2014 HCEA Calendar @ $10.00 each. $_________ Total Calendar Cost $________ 6.5% Sales Tax (Ohio residents only) $________ To Total Enclosed (shipping and handling is included)

1SPNPUF ZPVS CVTJOFTT ZFBS SPVOE XJUI ZPVS PXO DVTUPNJ[FE )$&" $BMFOEBS :PVS DPNQBOZ name and contact information imprinted PO PVS DBMFOEBS JT B VOJRVF BOE NFNPSBCMF BEWFSUJTFNFOU $VTUPN JNQSJOUT BWBJMBCMF JO quantities of fiffftty at discounted prices.

Ship To: Contact: Daytime Phone: Address: City/State/Zip: Send this form, along with check or money order (U.S. funds only), to: )$&" t -JCFSUZ )J 3PBE t #PXMJOH (SFFO 0)

Order your calendars with CUSTOMIZED IMPRINTS online at www.hcea.net or by phone at 419-352-5616 with your Visa, Discover, or MasterCard.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 3

2005 Ingersoll-Rand SD70D TF, Stk# 8580, OROPS, 66 Smooth Drum w/Pad Drum ShellKit, 1,544 hrs., 14.9x24 Tires, 4 Cyl. Cummins Eng. . ...............................................................$38,500

"In Business for over 31 Years" www.hendrixmachineryllc.com 1-936-327-5430 • Email: sales@hendrixmachineryllc.com

Se Habla Español 2008 Cat D4K XL, Stk#: 8387, OROPS, 6 Way

Blade, 2,081 hrs., 18" Pads, 9 Ft. Blade..$56,500

2006 Ingersoll-Rand SD116F, Stk# 8718, 84" Pad Drum, 892 hrs., 80% Tires, 23.1x24 Tires, 6 Cyl. Cummins Eng ................................$59,500

2011 John Deere 650J LT, Stk# HR-88, OROPS, Forestry Package, 6 Way Blade, 80% U/C, 1,908 hrs., Ripper Valve, 18" Pads, Height 9' 5", Width 8' 9', Width Track to Track 6' 7" ..........$79,500

2006 Ditch Witch HT25, Stk# 8544, OROPS, 2008 Komatsu PC200LC-8, Stk#: 8757, EROPS, 2011 Cat D6T XL, Stk#: 8939, EROPS, A/C & 2,927 hrs., 6" Trench, 12" Bucket, 36" Blade, 9" A/C, 6,591 hrs., 70% U/C, 47" Bucket, 32" Pads, Heat, Sweeps, Rear Screen, Semi U Tilt Blade, Rubber Tracks, 3 Cyl. Kubota Eng. ........$13,500 6 Cyl. Komatsu Eng., 10' 6" Wide ........$72,500 3,657 hrs., 85% U/C. 24" Pads, Ripper$225,000

2005 JLG G10-55A, Stk# 8912, 10,000 lbs., 55 ft., 4WD, 4WS, 5,412 hrs., 48" Forks, 50" Frame, Aux. Hyd., Outriggers, 14.00x24 Foam Filled Tires, 4 Cyl. JD Eng...............................$39,500

1998 Cat D5M XL, Stk#: #8948, EROPS, A/C, Sweeps, Eng. Encl., 6 Way Blade, 7,852 hrs., 60% U/C, 22" Pads, 10 ft. Blade ..........$38,500

2012 Cat 272C, Stk#: 8722, EROPS, A/C, 85 2005 John Deere 650J LT, Stk# 9006, OROPS, hrs., Aux. Hyd., 72" Bucket, 12x16.5 Tires, 4 Cyl. 6 Way Blade, (1,225 hrs. Old Meter) 2,560 hrs. Cat Eng ................................................$47,500 on New Meter, 18" Pads, 8' 9" Blade ....$38,500

2009 Komatsu PC78US-6, Stk# 8926, EROPS, 2006 Pioneer PP63C17L, Stk# 8774, Water A/C, FM Stereo, 2,887 hrs., 21" Bucket, Aux. Hyd., 91" Blade, 18" Rubber Tracks, 4 Cyl. Komatsu Eng 2008 EZ-GO 2WD, Stk#: 8778, Subaru Gas Eng., Pump, 728 hrs., 6 Cyl. Deutz Diesel Eng., ST ..................................................................$59,500 20x11.00x10 Tires..................................$3,500 7.00x15 Tires ........................................$13,500

2008 Cat D6T XW VP, Stk# 8943, EROPS, A/C, 6 2007 Cat D6K XL, Stk#: 8891, EROPS, A/C, FM Stereo, 6 Way Blade, 5,018 hrs., Rear Ripper s# Way Blade, 11,966 hrs., 28" Pads, D6H Ripper 4040311, 22" Pads, 10 ft. Blade ..........$96,500 s# 1EH04726, 13' 6" Blade ................$189,500

2007 Atlas Copco 185CFM, Stk#: 8434, 2,685 hrs., PSI 133, ST205x75Dx15 Tires, JD Eng., wt. 1,133 lbs ................................................$8,500

2008 Genie GTH844, Stk#: 8165, OROPS, 8,000 lbs., 44 ft., 4,653 hrs., 4WD, 4WS, 60" Forks, 52" Frame, 13.00x24 Hard Rubber Tires, 4 Cyl. JD Eng........................................$34,500

2006 Terex TH844C, Stk# 8561, 8,000 lbs., 44 ft., 4WD, 4WS, 1,978 hrs., Hyd. Self Leveing System, 14.00x24 Tires, 48" Forks, 74" Frame .....$31,500

1997 Cat 135H, Stk#: 8955, EROPS, A/C, FM 2005 JLG 600S, Stk#: 8028, OROPS, 60 ft., Stereo, 14,771 hrs., 14 ft. M/B, 14.00x24 Tires .. 2,917 hrs., 15x19x5 Foam Filled Tires, 4 Cyl. ............................................................$86,500 Deuzt Eng ............................................$32,500

2005 Ingersoll-Rand VR843C, Stk#: HR-93, 8,000 lbs., 43 ft., 2,261 hrs., 4WD, 4WS, 48" Forks, Hyd. Self Leveling System, 4 Cyl. Cummins Eng ......................................$29,500

2006 Sky Track 8042, Stk# 8235, 8,000 lbs., 42 ft., 4WD, 4 WS, 4,136 hrs., 13.00x24 @ 70% 2008 Broce KR350, Stk#: 8809, EROPS, A/C, Foam Filled Tires, Aux. Hyd., 48" Forks, 72" Frame, Hyd. Self Leveling System, 4 Cyl. 2005 Genie S40, Stk# 8532, 40 ft., 4 WD, 2,864 1,855 hrs., 8 ft. Broom, 90" Blade, Air Tires, 4 Cummins Eng ......................................$34,500 hrs., 12x16.5 Tires, 3 Cyl. Deutz Eng........$24,500 Cyl. Kubota Eng....................................$29,500

2012 Cat 320DL, Stk#: 8994, EROPS, A/C, FM 2002 Sterling Water Truck, Stk# 8721, A/C, Stereo, 2,199 hrs., 40" Bucket, Hyd. Quick 1,336,225 Miles, C-12 Cat Eng., 11Rx24.5 Tires, Coupler, 32" Single Grouser Pads, Aux. Hyd., 4,000 gal ..............................................$52,500 Hyd., 10' 5" Wide ..............................$146,500

2012 Cat D5K LGP, Stk#: 8920, EROPS, A/C, FM Stereo, Sweeps, Rear Screen, 6 Way Blade, 1,337 hrs., 26" Pads ............................$99,500

2012 Doosan DX225LC, Stk# 8667, New, EROPS, 2006 Genie S60, Stk: #HR-209, 60ft., 4WD, 209 2007 Cat D6T XL, Stk: #8738, EROPS, A/C, FM hrs. on New Meter (5/18/11 it had 2,670 hrs.), 3 Stero, S/U Tilt Blade, 5,477 hrs., Model D6H A/C, FM Stereo, 18 hrs., 45" Bucket, 32" Pads, 5 Cyl. Doosan Eng., 10' 6" Wide ................$129,500 Cyl. Deutz Eng., 355/55Dx725 Tires......$29,500 Ripper S# 1EH04502, 24" Pads ..........$179,500

2004 Skytrak 10054, Stk#: 8513, 10,000 lbs., 54 ft., 4WD, 4WS, 4,376 hrs., Aux. Hyd., 17.5x25 Foam Filled Tires, 60" Forks, 72" Frame, 4 Cyl. Cummins Eng ............................$49,500

2009 Cat 12M, Stk#: 8849, EROPS, A/C, Heat, Dresser TD7H, Stk#: 8841, OROPS, Sweeps, FM Stereo, 14 ft. M/B, Scarifier, Low Pro Cab, Rear Screen, 6 Way Blade, 1,719 hrs., 60% U/C, 80% Tires, 17.5x25 Tires, 11 ft. Height$147,500 24" Pads, 9' 3" Blade ............................$26,500

2009 Cat 324DL, Stk# 8668, EROPS, A/C, 2,816 hrs., 42" Bucket, 32" Pads ..................$129,500

2013 Cat 320E-LRR, Stk#: 8959, EROPS, A/C, FM Stereo, 935 hrs., 80% U/C, 21" Bucket, 31" Pads, 10' 5" Wide ..............................$169,500

2008 Cat D6T XW, Stk#: 8931, EROPS, A/C, Heat, Twin Tilt Angle Blade, 4,696 hrs., 30" Pads, Allid H6G Winch s# F1489071, 14' 8" Blade $189,500

Page 4 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WESTERN EDITION ®

Mobile

Facebook

Twitter

YouTube

IN THIS ISSUE

To read these stories and many more, visit w w w .constructionequipmentguide.com

SPECIAL SECTION…

RECYCLING, CRUSHING AND SCREENING Be sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.

FEATURES…

MORE THAN 17,500 ATTENDEES MAKE ICUEE 2013 HUGE SUCESS

The 2013 ICUEE, The Demo Expo, was by all measures a success and one of the largest and most comprehensive ever, with registered attendance of more than 17,500, surpassing the last show, held in 2011.

PIRTEK INLAND VALLEY HOSTS OPEN HOUSE IN ONTARIO

Those who attended had the opportunity to enter drawings to win prizes such as a Bass Pro Shop gift card, Angels baseball ticket package and a 39 in. HD television.

16 32

NCI SPONSORS 5TH ANNUAL WARRIOR SPORTING CLAYS TOURNAMENT IN HOUSTON The event raised nearly $210,000, surpassing its goal, for Team Red, White and Blue, a nonprofit organization whose mission is to enrich the lives of U.S. veterans by connecting them to their community through physical and social activity.

TEREX, VERMEER ENTER AGREEMENT

Terex Construction continues to develop alternative channels to market by entering into a private label agreement with Vermeer Corporation on Sept. 25.

KIRBY-SMITH DEMO DAY FEATURES WORLD’S FIRST AUTOMATED GRADE CONTROL DOZER

More than 80 people attended the event and were not only exposed to the attributes of new equipment, but also were treated to onsite grilled hamburgers and all the trimmings.

USDOT TO HELP N.M. WITH FLOOD ROAD REPAIRS

The U.S. Department of Transportation will make immediately available $2 million in emergency relief funds to help the state cover the costs of repairing roads and bridges damaged by severe storms in September.

44 BUSINESS CALENDAR 48 CLASSIFIEDS 54 COMING AUCTIONS 32

EQUIPMENT… 33 HENDERSON BlackBelt Maxx Work Truck Body 37 EZ SPOT UR Rotating Pole Setter

CORRECTION… In the Oct. 5 Western Edition, a source for the article titled, "ARB to Enforce InUse Off-Road Vehicle Regulation." inaccurately stated if "off-road vehicle owners have not registered equipment by the end of the year, they will never be able to register.” In fact, fleets can and should continue to register their equipment using ARB’s Diesel Off-Road On-Line Reporting System (DOORS), even if they have missed a deadline.

Circulated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Western Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr.

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Reckner Pete Sigmund John Pinkerton Tom Weinmann Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 Toll Free Fax Web site Editorial e-mail Advertising e-mail

215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com

editorial@cegltd.com production@cegltd.com

For advertising rates: Contact Edwin M. McKeon Jr. National Sales Manager 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 e-mail tmckeon@cegltd.com Contact Dale Agnew • Arizona • Colorado • New Mexico • Oklahoma • Texas • Wyoming

Toll Free 877/877-4997 Fax 972/695-6049 e-mail dagnew@cegltd.com Contact Frank Strazzulla • Alaska • California • Hawaii • Nevada • Oregon • Utah • Washington

949/459-1767 Fax 949/203-2859 e-mail fstrazzulla@cegltd.com Contact Patrick Kiel • Idaho • Montana

Toll Free 866/413-4265 Fax 952/353-2750 e-mail pkiel@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 5

Page 6 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

12:22 PM

1985! e c n i S

NEW, USED & REMAN PARTS 8 BOLTS PER DISK BLADE

BLADE CLEANER

HARDENED HUB COVER DUO-CONE™ SEAL GUARD

BLADES HALF CLAMP GUARD

TWO MODELS AVAILABLE: MT-11X32 & MT-13X38

• • • • • • • •

Undercarriage Arms & Booms Cylinders Valves Transmissions Pumps Engines and More!

BUILT EXCLUSIVELY for heavy duty construction LESS DOWNTIME 16 individually mounted disk blades MADE IN USA MTS manufactures disk blades out of steel REDUCED MAINTENANCE CAT® Duo-Cone™ seals and oil bathed bearings

9,6,7E W 285 N ,7( :(%6

www.RBusedParts.com CALL JENNIFER TODAY!

ELKADER, IOWA | 563-245-6871 | www.mobiletracksolutions.com

(888) 288-1052 jennifer@RBusedParts.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 7

REGISTER NOW TO SEE WHAT’S NEW Get the ultimate up-close look at the future of aggregates. Registration is now open for the show that offers an immense unveiling of all the newest equipment, technology and product breakthroughs in aggregates. Bringing you the latest in everything from recycling and reclaiming to expediting materials management, it’s the one show that breaks it all down, to help you work smarter.

MARCH 4-8, 2014 | LAS VEGAS CONVENTION CENTER | LAS VEGAS, USA

Co-located with 2 014 ®

Page 8 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Grove TM1500 Mobile Crane, 1:55 Scale ........$110

Caterpillar D8T Track-Type Tractor, 1:50 Scale ....$110

Komatsu WB146 Backhoe/Loader, 1:50 Scale ........$75

Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............$90

Komatsu D375 A Dozer, 1:50 Scale ..............................$125

Scale......................................................................................$80

Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110

Komatsu GD655 Motor Grader, 1:50 Scale ....................$90

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $80

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$105

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80

Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$80

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........$100

Komatsu HM250 Articulated Dump Truck, 1:50 Scale..$75

Bantam Truck Mounted Crane, 1:50 Scale ..................$115

Caterpillar 140M Motor Grader, 1:50 Scale ....................$85

Komatsu HM400-3 Articulated Truck, 1:50 Scale ........$100

Bantam Truck Mounted Shovel, 1:50 Scale ....................$60

Caterpillar M200 Cold Planer, 1:50 Scale ....................$110

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$45

Bobcat A300 Skid Steer Loader, Scale 1:25 ..................$40

Caterpillar 226B3 Skid Steer Loader, 1:32 Scale ..........$40

Komatsu PC200-8 Excavator, 1:50 Scale ....................$110

Bobcat E35 Compact Excavator, 1:25 Scale ................$50

Caterpillar 247B3 Multi-Terrain Track Loader, 1:32 Scale ..

Komatsu PC400 LC Excavator, 1:50 Scale ....................$95

Bobcat E55 Compact Excavator, 1:25 Scale ................$60

..........................................................................................$40

Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40

Bobcat 5600 Toolcat Utility Vehicle, 1:25 Scale ............$55

Caterpillar 336D L Excavator, 1:50 Scale ......................$95

Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40

Bobcat M200 Gold Skid Steer Loader, Scale 1:25 ......$30

Caterpillar 365B L Series II Excavator, 1:50 Scale ........$75

Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......$25

Caterpillar 374D L Excavator, 1:50 Scale ....................$150

Bobcat S185 Skid Steer Loader, 1:25 Scale ..................$50

Caterpillar 963D Track Loader, 1:50 Scale ....................$60

Bobcat S510 Skid Steer Loader, 1:25 Scale ..................$65

Caterpillar 977 Traxcavator, 1:50 Scale..........................$60

Bobcat S530 Skid Steer Loader, 1:25 Scale ..................$65

Doosan Moxy MT31 Articulated Truck ........................$100

Bobcat S550 Skid Steer Loader, 1:25 Scale ..................$65

Gehl 680 Compact Wheel Loader, 1:50 Scale ..............$45

Bobcat S570 Skid Steer Loader, 1:25 Scale ..................$65

Hamm 110 Asphalt Compactor w/ROPS, 1:50 Scale ....$70

Bobcat S590 Skid Steer Loader, 1:25 Scale ..................$65

Hamm 3307 Compact Roller, 1:34 Scale ........................$45

Bobcat T550 Compact Track Loader, 1:25 Scale ..........$65

Hamm GRW 280 Compactor w/Cabin, 1:50 Scale ........$85

Bobcat T590 Compact Track Loader, 1:25 Scale ..........$65

Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40

Bobcat T770 Compact Track Loader, 1:25 Scale ..........$45

International 175 Crawler Loader, 4in1, 1:50 Scale ......$65

Bobcat Versahandler Tool Carrier, 1:25 Scale ..............$50

International TD-15 Dozer, 1:50 Scale ............................$60

Komatsu WA500 Wheel Loader, 1:50 Scale ..................$80 Komatsu WA600 Wheel Loader, 1:50 Scale ..................$80 Komatsu WB146 Backhoe/Loader, 1:50 Scale ..............$75 Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale .. ..........................................................................................$90 Link-Belt 80100 RTC, 1:50 Scale ..................................$185 Link-Belt 250 X Excavator, 1:50 Scale..........................$140 Poclain 350 Front Shovel, 1:50 Scale ..........................$190 Terex AC100/4 All Terrain Crane, 1:50 Scale ..............$200 Terex TR60 Off-Highway Truck, 1:50 Scale..................$160 Vogele MT3000 Powerfeeder, 1:50 Scale ....................$140 Vogele 1900 Tracked Paver, 1:50 Scale........................$125

Bucyrus Erie 22B Cable Shovel, 1:50 Scale................$225

International TD-20E Dozer, 1:64 Scale..........................$24

Bucyrus Erie 22B Cable Backhoe, 1:50 Scale ............$225

International TD-25 Dozer, 1:50 Scale ............................$75

Vogele Super 700 Small Paver, 1:50 Scale ....................$75

Case 330 Articulated Dump Truck, 1:50 Scale ..............$35

JCB 3CX Backhoe/Loader, 1:50 Scale ..........................$85

Vogele Super 1803-2 Wheeled Paver, 1:50 Scale........$135

Case 420 Series 3 Uniloader, 1:50 Scale ......................$85

John Deere 315 SJ Backhoe/Loader, 1:50 Scale ..........$45

Vogele Super 3000-2 Tracked Paver, 1:50 Scale ........$140

Case 695 Super “R” Backhoe/Loader, 1:50 Scale ......$165

John Deere 400D Articulated Truck, 1:50 Scale............$45

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$115

Case CX130 Excavator w/Breaker, 1:50 scale ............$135

Komatsu CK25 Compact Track Loader, 1:50 Scale ......$45

Volvo EC280 Excavator, 1:50 Scale................................$50

Caterpillar AP655D Asphalt Paver, W/O Canopy, 1:50

Komatsu D51 PX Dozer, 1:50 Scale................................$85

Volvo L220G Wheel Loader, 1:50 Scale ......................$120

Scale..................................................................................$80

Komatsu D51 EX Dozer, 1:50 Scale................................$85

Volvo L250G Wheel Loader, 1:50 Scale ......................$120

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ..$65

Komatsu D65PX-17 Dozer, 1:50 Scale............................$80

Volvo SD-122 Soil Compactor, 1:72 Scale ....................$25

Caterpillar D6K Track-Type Tractor................................$60

Komatsu D155 AX Dozer, 1:50 Scale..............................$85

Wirtgen W210 Cold Milling Machine, 1:50 Scale ..........$80

Collections Wanted, I Buy Collections

CEG Scale Models 470 Maryland Drive Fort Washington, PA 19034

Shipping and Handling Included

Contact – Barry McKeon

800-523-2200

Ext. 197

• 610-506-5961 Cell

Email – bmckeon@cegltd.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 9

Page 10 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

More Than 17,500 Attendees Make ICUEE 2013 Huge Sucess

Case Product Specialist Michael Kaufmann (L) and Mike Grenz of Fort Collins, Colo., Power & Light.

he 2013 ICUEE, The Demo Expo, was by all measures a success and one of the largest and most comprehensive ever, with registered attendance of more than 17,500, surpassing the last show, held in 2011. The 2013 ICUEE — International Construction and Utility Equipment Exposition ran October 1 to 3 at the Kentucky Exposition Center in Louisville, Ky. There was plenty of enthusiasm and a positive buzz throughout ICUEE 2013. Attendees connected with exhibitors to do business and connected with industry experts in more than 90 education sessions to gain a clearer understanding

(L-R): Bandit Industries’ Ed Woods, Colleen Hall, Gene Bridges and Luke Grover brought their Model 90XP Bandit chipper along with several other machines to present to attendees at ICUEE.

of industry issues and challenges. “We hope the great turnout and participation at this year’s ICUEE points to more sustainable and broader industry growth. Attendees said ICUEE prepares them for what lies ahead and that the show is where they go to find new products and solutions, make buying decisions, and learn the latest industry best practices,” said Sara Truesdale Mooney, ICUEE show director. The final registration count made the 2013 show the second highest attended in ICUEE history; international attendance also was second-highest. Participants came from all 50 states, all 10 Canadian provinces and 50 other

(L-R): Rick Gramoll, MBW, joined Todd Jurjevic, Minnich Manufacturing, to discuss Minnich’s new A1-UTL utility drill with Orville Saylor of Northern Ohio Rural Water.

countries worldwide. ICUEE 2013 had a record 862 exhibitors, and the show floor hit a record 1.17 million net sq. ft., including co-located H20-XPO and iP Utility Safety Conference & Expo. The indoor and outdoor exhibits offered utilities and utility contractors the ultimate in comparison shopping for new products and equipment, with the hands-on product demonstrations that are a hallmark of ICUEE. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

(L-R): Fecon’s Courtney Shafer, Matt Warfel and Kate Heekin introduced the company’s new FTX 128L track mulcher at the show.

see ICUEE page 36

(L-R): Link-Belt Crane dealer representatives Eric Petersen of Atlantic & Southern Equipment, along with Randy Hoover, Mike Boyd, Jaime Audley and Rob Courville of Crane Sales & Service were on hand to discuss Link-Belt’s lineup of cranes on display at the show.

John Rabideaux, general manager of Trenchers Plus, Burnsville, Minn., and Toro Underground dealer likes the turnout at the ICUEE and the demo areas, a great place to showcase machines like this Toro Quad RT1200 with a new tier IV engine, optional vibratory plow and optional front mounted 762 backhoe.

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ October 19, 2013 â€˘ Page 11

ÂŠÂ•Â•Čą Â˜ÂžÂ? Call DougČąČŚ/Čą ÂŠÂ&#x;ÂŽÇąČąČą Sam: (866) 485-7180

2007 Komatsu PC78MR-6: #81694, Cab/AC, Rubber Tracks, Blade, Aux Hyd, QC, 3700 Hrs .. ..............................................................$54,500

2007 Komatsu PC138USLC-8: #81618, Cab/AC, 8â€™ Arm, 24â€? Tracks, Blade, 4400 Hrs ....$83,500

2004 Komatsu PC160LC-7: #81899, Cab/AC, Aux Hyd, 5100 Hrs................................$84,500

1987 Komatsu PC200LC-3: #91840, Cab, GP Bkt, 9400 Hrs ........................................$29,500

2011 Komatsu PC200LC-8: #81903, Cab/AC, 9â€™7â€? Arm, KOMTRAX, Rear Camera, Only 200 Hrs ......................................................$169,500

2001 Komatsu PC200LC-6LF: #80381, Cab/AC, 60â€™ Long Front, 60â€? Ditching Bkt, 5350 Hrs $139,500

2001 Komatsu PC228USLC-3: #80703, Cab/AC, 31.5â€? Tracks, 9â€™7â€? Arm, 5100 Hrs ........$89,500

1995 Komatsu PC250LC-6: #91777, Aux Hyd, 31.5â€? Tracks, 10,000 Hrs ......................$49,500

2005 Komatsu PC270LC-7: #81943, Cab/AC, 33.5â€? Tracks, Mech Thumb, 6350 Hrs $104,500

2008 Komatsu PC270LC-8: #91822, Cab/AC, 31.5â€? Tracks, 11â€™6â€? Arm, JRB QC, KOMTRAX, 9800 Hrs ..............................................$99,500

2006 Komatsu PC300LC-7EO: #81832, Cab/AC, 10â€™ Arm, 33.5â€? Tracks, KOMTRAX, 7150 Hrs...... ............................................................$119,500

2005 Komatsu PC400LC-7: #91871, Cab/AC, 35.5â€? Tracks, 13â€™ Arm, JRB QC, Aux Hyd, 13,300 Hrs ..........................................$118,500

Page 12 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 13

PIRTEK Inland Valley, a provider of onsite hose replacement, held an open house on Sept. 27 at its facility in Ontario, Calif.

PIRTEK Inland Valley Hosts Open House in Ontario PIRTEK Inland Valley, a provider of onsite hose replacement, held an open house on Sept. 27 at its facility in Ontario, Calif. Customers of PIRTEK Inland Valley were invited to attend the open house and enjoy lunch and other refreshments. Those who attended had the opportunity to enter drawings to win Dozens of customers prizes such as a Bass Pro showed up to support the Shop gift card, Angels base- open house. ball ticket package and a 39 in. HD television. Dozens of customers showed up to support the open house. “All of us at PIRTEK Inland Valley wanted to show our appreciation to our local customers and we are thrilled to have so many customers attend the event,” said Gil Moyers, Customers of PIRTEK Inland Valley were invited general manager. attend the open house Serving as home base to to and enjoy lunch and other its mobile fleet that provides refreshments. onsite hose replacement, PIRTEK Inland Valley Hose Service Center is stocked with a wide variety of hoses, fittings and adapters for made-toorder hose assemblies. The Hose Service Center is located at 909 S. Cucamonga Ave., Ste 101, Ontario, Calif. 91761. Mobile service is available around the clock by calling 909/773-1700. The Hose Service Center is open Monday through Friday from 8:00 a.m. to 5:00 p.m. and Saturday from 8:00 a.m. to noon. For more information, visit www.pirtekusa.com (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The SEAL SAVER* WILL: • Eliminate rod scoring • Extend the life of cylinder seals • Protect cylinders from the elements • Prevent pitting due to chemical washes • Reduce particle contamination of hydraulic systems • Minimize dings and dents associated with falling debris *Patented

SEAL SAVER has proven effective in Recycling, Construction, Mining, Rock Quarries, Waste Management, Refineries, Wood Products Processing, Steel Mills and Hot Slag Industries. Exclusively manufactured by:

Fluid Control Services, Inc. Made in the USA

1155 Allgood Road • Suite 15 Marietta, GA 30062

1-800-683-5189 Fax: 770-509-5832

Visit

www.sealsaver.com for more information or contact us at 1-800-683-5189

Page 14 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ConExpo 1987 ConExpo ’87 Wows ’Em in Vegas!

This ConExpo article was published in Construction Equipment Guide (CEG) on March 4, 1987. This and other ConExpo articles to follow will be part of a continuing series that take a look back at ConExpos past through the reporting of CEG. We hope you enjoy these retros as much as we did searching for them deep in our archives.

ConExpo ’87 set new world records in Las Vegas, Nev., Feb. 21-26! The largest international construction equipment exposition in history not only boasted a huge attendance (130,000 people), but also a record 900,000 square feet of exhibit space, with 30,000 tons of equipment, valued at over a half billion dollars, shown by 280 exhibitors. The city of Las Vegas handled the crowds with great skill and professional courtesy. Everyone was taken care of, except in the casinos, where they were on their own! Exhibitors at the show said reaction to their displays was unprecedented. Manufacturers interviewed by Construction Equipment Guide said qualified leads were “beyond our wildest dreams.” One trailer company executive brought a large box chockfull of qualified leads per day back to his office. The box held a treasure trove of 500 to 600 names and companies. A person represented a manufacturer of heavy-duty quarry equipment said he was “flabbergasted,” not only at the number of inquiries, but also by the fact that his company had sold over $2 million in equipment during the first three

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 15

Las Vegas, Nevada

days of the show. Others interviewed by CEG generally expressed the same enthusiasm. One of the largest manufacturers of dozers, loaders, trucks, and all-around earthmoving equipment reported that the number of qualified leads was far beyond expectations. The show, it was agreed, was “fantastic,” the location was terrific, and the crowds were taken care of very nicely despite the fact that ConExpo ’87 was the largest convention ever held in Las Vegas. Check-in lines at hotels were minimal, and express check-outs proved a great convenience. The only long lines were to get into the various hit shows of the week. These included Siegfried & Roy’s “Beyond Belief” show at the Frontier, Bill Cosby at the Las Vegas Hilton, and Tom Jones at the Bally’s Grand (wowing all the gals who showed up). All these shows were sellouts every night and tickets were rather difficult to come by. Action Helicopters did a thriving business taking interested daredevils over Hoover Dam and Lake Mead and down into the Grand Canyon for some magnificent scenery and experiences. Besides showcasing the colossal display, ConExpo featured numerous educational seminars on timely subjects. Sponsored by the Construction Industry Manufacturers Association (CIMA), assisted by 26 allied industry groups, ConExpo ’87 was well worth waiting six years for. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG see CONEXPO page 44

Did You Know? The population in Las Vegas between 1980 and 1990 grew from 164,674 to 258,285. Today, Las Vegas’s population is nearly 600,000.

Page 16 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

NCI Sponsors 5th Annual Warrior Terex Names Pratt Sporting Clays Tournament in Houston Sales Manager Houston-based NCI Building Systems served as the Medal of Honor sponsor for ConocoPhillips’ 5th Annual Warrior Sporting Clays Tournament Sept. 28 at the American Shooting Center in Houston, Texas. The event raised nearly $210,000, surpassing its goal, for Team Red, White and Blue, a nonprofit organization whose mission is to enrich the lives of U.S. veterans by connecting them to their community through physical and social activity. NCI’s contribution comprised of volunteer time, help with fundraising efforts for Team Red, White and Blue, and sponsoring five veterans to join NCI employee teams at the clay shoot.

(L-R): NCI Building Systems employee and retired Army Sergeant Lanny Nicks joins his wife, Tanya, and colleagues Danielle Martens and Jessica Stavinoha at the 2013 ConocoPhillips Warrior Sporting Clays Tournament.

these give veterans a NCI was also a presenting sponsor for unique opportunity to learn the SEAL Legacy Foundation Golf a new sport or activity that Classic Tournament earlier this year, they can take home to their which raised more than $600,000 for local chapter, and are built the organization. The SEAL Legacy to inspire participants to Foundation’s mission is to support the NCI Building Systems employee Delvin Warner commit to their own health U.S Navy SEAL community by raising funds for scholarships and financial (far R) joins Dennis Maale and Danny Huey and fitness. Support of the Warrior needs of SEALs and their families. for a break from shooting. Sporting Clays (This story also can be found on This is a meaningful opportunity for Tournament is part of an overall effort Construction Equipment Guide’s Web the employees and their customers to by NCI to focus on helping members of site at www.constructionequipmentspend time with veterans and express the armed forces and their families. guide.com.) gratitude for their service, according to the company. This was NCI’s third time sponsoring the event. More than 50 volunteers were on hand. “NCI leadership has long been passionate supporters of the armed forces, and we have enthusiastically participated in similar opportunities, in recent years, to sponsor military-focused fundraising events as a company,” said Delvin Warner, president of corporate accounts at NCI Building Systems. “We encourage our employees to get involved in events like this along with their colleagues and families, and we’re excited to join ConocoPhillips and Team Red, White and Blue in their mission to honor and support our military and their loved ones.” The funds collected at the tournament will be used to fund Team Red, White and Blue’s Veterans Triathlon NCI Building Systems employees Gerry King (L) and Don Riggs support the Camp in spring 2014. Programs like ConocoPhillips’ 5th Annual Warrior Sporting Clays Tournament at the American Shooting Centers.

Terex Utilities has appointed Casey Pratt to the role of sales account manager, covering North Texas and Oklahoma. In his new sales territory, Pratt will sell all Terex Utilities products and services to a wide-range of customers, including investor-owned utilities, electric cooperatives, municipalities and utility contractors. As a sales account manager, Pratt will focus on new customer opportunities, as well as working with existing customers to meet their specific equipment needs. “I am pleased to welcome Casey to the sales team,” said Terex Utilities Regional Sales Manager Gary Rice. “With his Terex Utilities has appointbackground, Casey has ed Casey Pratt to the role of the product knowledge sales account manager, covand experience to help ering North Texas and customers understand the Oklahoma. different utility equipment options available from Terex and counsel them on matching the right equipment to the job.” Prior to taking on the sales account manager role, Pratt held the role of marketing projects coordinator of Terex Utilities. He also has held several different positions within various Terex business segments. Pratt will be based in the Dallas-Ft. Worth, Texas, area and can be reached at casey.pratt@terex.com. For more information, visit www.terexutilities.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Terex, Vermeer Enter Agreement Terex Construction continues to develop alternative channels to market by entering into a private label agreement with Vermeer Corporation on Sept. 25. Terex will provide Vermeer Corporation with a forestry compact track loader specifically designed to work in Vermeer’s applications. “This agreement represents a good opportunity for incremental volume to better leverage our manufacturing operations in Grand Rapids, Minn., and drive additional operational efficiencies through our production and supply chain,” said Dean Barley, vice president and general manager, Terex Construction Americas and Global Aftermarket. “We’re proud to be recognized for our quality and support and are pleased to assist in meeting the equipment needs of others in our industry,” added Barley. l The Terex Grand Rapids facility manufactures a full line of Terex compact track loaders and skid steer loaders. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Pages 17-27

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Peterson Holds Demo Day

rewer Farms, Inc. invited Peterson Pacific personnel and guests to its 40acre facility for the first ever Peterson demo day. Tom Brewer, owner of Brewer Farms, is a long-time Peterson customer and has owned Peterson equipment and is well respected in his industry for creating mulch, poultry bedding, landclearing, and biomass production. The event was held in Evansville, Ind., on Sept. 27. More than 300 people from seven different countries, and 27 states attended the event. The demo day featured stations showcasing the 16 pieces of equipment on display. Guests started at different sections and had a set time to view the machinery, assisted by at least two members of Peterson’s personnel. The types of equipment on display included 5710C, 2710C, 4700B, horizontal grinders; 4300B, 4310B drum chippers; 4800F, 5900E disc chippers/flail; BTR70 blower trailer; DS6162 screens; and the new Terra Select S6-E star screen. “We had our good friends at Terra Select at the show with four different kinds of trommel and star screens, and we were able to show the advantages of different kinds of screens and how they perform in a variety of material from compost to wood grindings,” said Michael Spreadbury, marketing manager of Peterson Pacific. To end the event Peterson offered guests a

catered barbecue dinner. “We really felt that this event was a success as it allowed our customers to network with one another on best practices, and operations setup — and we had a lot of feedback from those who attended the event that this was time well spent,” said Spreadbury. “Likewise, we showed that Peterson is not just about horizontal grinders or chippers, but we have the full complement of stacking conveyors, blower trucks, and screens to help our customers get the most from the fiber that they process.” (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

(L-R): Donald Kaiser of Donald Kaiser Jr. Trucking; and Sam and Bob DeLullo of Woodbed Corp in St. Marys, Pa., stand on top of the Peterson 2710c grinder.

CEG

see PETERSON page 18

(L-R): Billy Hogan of T H Blue, Rodney Winders of Pioneer Machiner, and Tommy Blue, owner of T.H. Blue, look forward to the demo day.

(L-R): Joe Aumiller and Max Peachey of Metzler Forest Products; Neil Peterson, founder of Peterson; and Allen Metzler, owner of Metzler Forest Products, get ready to check out the DS6162 screen.

Larry Cumming, president of Peterson Pacific, welcomes everyone to the demo day.

(L-R): Bob Taormina of Trico Equipment, Bill Jaworski of County Conservation, and Rob Devenezia of Trico Equipment enjoy the demo day.

(L-R): Larry Thomas of KPI-JCI; Jackie and Tim Curran, Seaway Timber & Harvesting; Larry Cumming, president of Peterson; and Ernst Herrmann, president of Terra Select in Sassenberg, Germany, take a tour of the demo area.

Page 18 • October 19, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Ind.’s Brewer Farms Hosts Peterson Pacific Demo Day PETERSON from page 17

Don Muta of Peterson CAT shows the Cat C 9.3 Tier IVi engine to Raul Bezanilla. Terry Manway (L) and Jeffrey Hickey, both of Kennamet al, answer questions about Kennamet al products.

Tom Brewer, owner of Brewer Farms in Evansville, Ind., speaks at the event. (L-R): David Bagshaw of Koetter & Smith, Randy Wyrick of Peterson, and Tom Schilmiller of Koetter & Smith look at the Peterson DS6162 screen.

A John Deere loader loads up the Peterson 2710c grinder.

(L-R): Warren Garner and Matt Allen, both of Ground Up Recycling, and Claude McNight of Peterson stand on the hopper deck of the Peterson 4700ASG asphalt grinder.

(L-R): Todd Gustafson of FABCO Equipment; Dan Szotkowski and Barry Christian of Payne & Dolan; Steve Berg of FABCO Equipment; and Todd Buta of Payne & Dolan look at the Terra Select screens.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 19, 2013 • Page 19

Solid choice for your productivity.

COMPASS EQUIPMENT 4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 • Fax: 530-533-7657 www.compassequip.com

CRISP INDUSTRIES, INC. 323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 South Texas 78155 830-625-6822 Sequin, Texas 78155 830-372-1110

Optimal screening results Lokotrack ST3.8 mobile screen The Lokotrack ST3.8 is a heavy-duty two-deck mobile screen offering optimal mobility, productivity and flexibility in high production jobs. On-board stockpiling and folding side conveyors enable quick and easy set up. The ST3.8 is capable of producing two sized end products, and an optional two-deck vibrating grid can be added to yield three sizes. Learn more by contacting your local Metso distributor today.

www.metso.com

CONTRACTOR PREFERRED 70% of all HydroSeeders® purchased by contractors today are

For Reliable Equipment to Get the Job Done, Call One of These Fine Dealers and Request Austin 512-388-2529

Dallas 214-819-4100 Fort Worth 817-626-2288

www.romco.com

Houston 713-937-3005

San Antonio 210-648-4600

Longview 903-758-5576

Mercedes 956-565-0100

Both are Full Service Dealers for the Entire Finn Product Line, Including HydroSeeders® Straw Blowers Bark Blowers

Farmington, NM 505-324-8601

Perris, CA 909-355-3600

Albuquerque, NM Prescott, AZ 928-778-5621 www.roadmachinery.com 505-345-8383 Gilbert, AZ 480-545-2400

Tucson, AZ 520-623-8681

El Paso, TX 915-872-1001

Page 20 • October 19, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

www.petersoncat.com Northern California 888-738-3776 Oregon/Southern Washington 800-452-7676

IS HE HERE! ERE!

www.wagnerequipment.com Albuquerque, NM 505-345-8411 Aurora, CO 303-739-3000 Burlington, CO 719-346-7880 Colorado Springs, CO 719-635-1669 Durango, CO 970-259-2001 El Paso, TX 915-821-7651 Farmington, NM 505-327-5331 Grand Junction, CO 970-242-2834 Hayden, CO 970-276-3781 Hobbs, NM 575-393-2148 Pueblo, CO 719-544-4433 Windsor, CO 970-278-1750

Now Produced On The West Coast!

What this means for you…

As Always, Delivering…

Chico, CA Redding, CA Fortuna, CA Willows, CA Willits, CA Santa Rosa, CA San Martin, CA San Leandro, CA Eugene, OR North Bend, OR Klamath Falls, OR Redmond, OR Medford, OR Albany, OR Portland, OR Salem, OR The Dalles, OR Longview, WA

www.majorwire.cc

www.tractorandequipment.com Billings, MT 406-656-0202 Billings-Southgate, MT 406-245-4426 Bozeman, MT 406-585-5800 Great Falls, MT 406-761-7900 Helena, MT 406-442-2990 Williston, ND 701-572-8377 Worland, WY 307-347-4747

www.mustangcat.com Houston, TX 713-460-2000 Beaumont, TX 409-892-8412 Bryan, TX 979-775-7368 Bryan, TX 979-775-0639 Channelview, TX 281-452-7368 Conroe, TX 936-756-1110 El Campo, TX 979-543-3389 Freeport, TX 979-233-7368 Houston, TX 713-462-9993 Houston, TX 713-228-7368 LaMarque, TX 409-935-7000 Lufkin, TX 936-639-5551 Lufkin, TX 936-632-6775 Nederland, TX 409-722-7368

www.ncmachinery.com Seattle, WA 425-251-5800 Chehalis, WA 360-748-8845 Fife, WA 253-896-0878 Monroe, WA 360-805-6000 Mount Vernon, WA 360-424-4292 Port Angeles, WA 360-452-9222 Wenatchee, WA 509-886-5561 Yakima, WA 509-248-2371 Anchorage, AK 907-786-7500 Dutch Harbor, AK 907-581-1367 Fairbanks, AK 907-452-7251 Juneau, AK 907-789-0181 Prudhoe Bay, AK 907-659-9600 Wasilla, AK 907-352-3400

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 19, 2013 • Page 21

www.holtcat.com 800-275-4658 Austin, TX • Bridgeport, TX • Corpus Christi, TX Fort Worth, TX • Irving, TX • Laredo, TX Lewisville, TX • Longview, TX • North Dallas, TX Pflugerville, TX • San Antionio, TX • Sonora, TX Texarkana, TX • Tyler, TX • Victoria, TX Waco, TX • Weslaco, TX

www.johnson-machinery.com Riverside, CA 951-686-4560 Fontana, CA 909-574-6601 Indio, CA 760-342-1597

Murrieta, CA 951-696-1063 Hesperia, CA 760-947-0967

www.hawthornecat.com 800-437-4228 Lakeside, CA • San Diego, CA • San Marcos, CA Hilo, HI • Lihue, HI • Kailua Kona, HI Kahului, HI • Waipahu, HI

Page 22 • October 19, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Some Hammers Are Just Too

Big For Their Ads! MIDCO Demolition Tool Company Performs a Complete Teardown & Complete Rebuild Including: 1 - Remove the head. 2 - Pull the cylinder. 3 - Hot pressure wash the entire unit. 4 - Polish piston & check tolerances. 5 - Rebuild & charge accumulator. 6 - Install all new seals. 7 - Repaint to spec. 8 - Install new chisel & bushing. 9 - All hammers include new hoses, seals, chisel or moil points, paint, OEM decals and final hammer testing.

Midco Offers the Finest in New Hydraulic Hammer and the Highest Quality in Rebuilds!

L L I H E H T F O G N I K

MIDCO Demolition Tool Company... Your “One-stop Shop” for New, Used and Rebuilt Hydraulic Hammers Plus Over 1,300 Hammer Tools and Parts for Sale!

SALES • SERVICE • PARTS

www.superior-ind.com

At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determination and energized by progress. How can we help you?

Official dealer partner in Texas, Louisiana and Mississippi.

Official dealer partner in Northern California.

McCOURT & SONS EQUIPMENT, INC.

COMPASS EQUIPMENT INC.

5141 Hwy 71 West LaGrange, TX 78945 979-242-5298 888-838-9252 www.portablescreen.com

4688 Pacific Heights Road Oroville, CA 95695 530-533-7284 530-533-8610 www.compassequip.com

OEM REPAIR FACILITY - DALLAS, TX Call David Spainhour in Dallas,TX 214-688-0444 • Fax 214-630-5419 Email: dspainhour@midcosling.com

POWER EQUIPMENT CO. 500 E. 62nd Ave. Denver, CO 80216 800-883-9284 www.power-equip.com Locations: Denver, CO Colorado Springs, CO Grand Junction, CO Casper, WY Albuquerque, NM

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 19, 2013 • Page 23

NEW

Unrivalled flexibility with the CI411 primary or secondary impact crusher

Sandvik QI341 PrisecTM Impactor Primary or Secondary The QI341 has been designed with productivity, mobility, minimal environmental impact and user friendliness at its core. The QI341 is tangible representation of Sandvik’s commitment to servicing the growing market for the recycling of construction materials and the production of high quality aggregates from materials previously seen as waste.

Please contact us for details of your nearest dealers Sandvik Construction 1- 8 0 0 - 826 -762 5 i n fo. s m c- u s @ s a n d v i k .co m w w w.co n s t r u c t i o n . s a n d v i k .co m

Visit us at: C3 50309 Platinum 9310

Page 24 • October 19, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

4428 E. Trent Ave. Spokane, WA 99212 800-541-0754 www.modernmachinery.com 22431 83rd Ave. S. Kent, WA 98032 800-669-2425 19444 Ivan Street SW Rochester, WA 98579 800-304-4421 5241 N. E. 82nd Ave. Portland, OR 97220 800-950-7779

4610 Cloudburst Way Eugene, OR 97402 800-826-9811 101 International Dr. Missoula, MT 29808 800-332-1617 3155 Highway 93 S. Kalispell, MT 59901 800-434-4190 7850 S. Frontage Rd. Billings, MT 59101 800-735-2589

Now Serving Idaho 390 N. 2000 Lindon, UT 84042 801-796-6126 801-796-6128 www.goodfellowcrushers.com Boulder City, Nevada 702-293-7504 F: 702-293-0529

San Bernardino, CA 908-887-9800 F: 909-887-9888

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 19, 2013 • Page 25

102x152 Track Mounted Impact Plant

6x16 2 Deck Screen-It

Rock-It Static Grizzly

Picking Station with Screen-It

Separate-It RWS 2000 Rock/Wood Separator

Page 26 • October 19, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

High Productivity – Low Operating Costs SENNEBOGEN green line material handling machines make your competitors “green with envy” Waukesha-Pearce Industries, Inc. Corporate Office: 12320 So. Main Houston, TX 77035 713/723-1050 • Fax: 713/551-0798 www.wpi.com

Tomball, TX 281/351-9016

Edinburg, TX 956/386-0107

Kilgore, TX 903/984-2011

San Antonio, TX 210/648-4444

Port Arthur, TX 409/721-5305

Pflugerville, TX 512/251-0013

Corpus Christi, TX 361/884-8275

Buffalo, TX 903/322-7150

Bane Machinery Inc.

Modern Machinery

Titan Machinery

www.banemachinery.com

www.modernmachinery.com

www.titanmachinery.com

Dallas, TX 214/352-2468

Fort Worth, TX 817/847-5894

Spokane, WA 800-541-0754

Boise, ID 800-221-5211

Denver, CO 303-286-7000

Omaha, NE 402-733-3700

Kent, WA 800-669-2425

Pocatello, ID 800-829-4450

Fargo, ND 701-237-3333

Sioux Falls, SD 605-336-3434

Rochester, WA 800-304-4421

Missoula, MT 800-332-1617

Portland, OR 800-950-7779

Kalispell, MT 800-434-4190

Eugene, OR 800-826-9811

Billings, MT 800-735-2589

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • October 19, 2013 • Page 27

LLokotrack okotrack LLT1213 T1213

More versatility, more opportunities for you.

Top T op capacit cap capacity y impac impactor tor plan plantt If you’re looking ffor or a combination of increased crushing capacity and uniffor orm end products, take a look at the Lokotrackk LT1213 LT1213 primary impactor plant from Metso. The LLT1213 T1213 offfers ers a more productive impact crushing method that also increases your business opportunities. With a single ngle LLT1213, T1213, you can crush both rock and any mineral-based demolition debris, all while maintaining top per for o mance and end product quality. To learn more about the versatile LT1213, LT1213, contact your local Metso distributor today. E-mail: minerals.nam@metso.com www.metso.com

Lokotrack LT1213 impactor plant

CRISP INDUSTRIES, INC.

WESTATE

323 Energy Way • Bridgeport, TX 76426 940-683-4070 • 800-315-0871 • Fax: 940-683-2181 www.crispindustries.com info@crispindustries.com South Texas 78155 830-625-6822 Seguin, TX 78155 830-372-1110

P.O. Box 50370 • Billings, MT 59105 800-999-6676 • Fax: 406-373-6553 www.westate.com

COMPASS EQUIPMENT

WHEELER CRUSHING SYSTEMS

4688 Pacific Heights Rd. • Oroville, CA 95695 530-533-7284 • 530-533-8610 • Fax: 530-533-7657 www.compassequip.com

Salt Lake City, UT • Hurricane, UT Ogden, UT • Vernal, UT 800-779-4450 www.wheelercat.com/crushing

Page 28 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Tiltable cab

Superior boom design

Removable outrigger boxes

RT9150E rough-terrain crane At Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With  rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite. Featured is the RTE – its  USt capacity and  ft. boom combination provide the best capacity and longest boom in its class.

LEADERS IN LIFTING For more information, visit www.manitowoccranes.com

H&E Equipment Services

Kirby-Smith Machinery, Inc.

Western Pacific Crane & Equipment

www.HE-equipment.com

www.kirby-smith.com

www.wpcrane.com

St. George, UT 435-674-2994 Las Vegas, NV 702-320-6500 Phoenix, AZ 602-232-0600 Tucson, AZ 520-770-1120

Oklahoma City, OK 800-375-3339 Tulsa, OK 800-375-3733 Kansas City, KS 877-851-5729 St. Louis, MO 866-279-1392

Belgrade, MT 406-388-2308 Billings, MT 406-259-9720 Boise, ID 208-388-3323 Salt Lake City, UT 801-974-0388

Albuquerque, NM 505-764-8100 Dallas, TX 972-986-0910 Houston, TX 713-433-6411

8600 Calabash Ave. Fontana, CA 92335 562-286-6618 Fax: 909-356-1340 275 W. Larch Road Tracy, CA 95304 209-597-3824

5909 12th Street East Fife, WA 98424 253-254-7950 91-210 Kalaeloa Blve. Kapolei, HI 96707 808-682-7263

5801 Silverado Way Anchorage, AK 99518 855-342-7263 3521 Alken Street Bakersfield, CA 93308 855-927-2637

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 29

Which compact grader has a 60+ year USA Heritage?

ARIZONA

NEW MEXICO

NEVADA

COLORADO

EARHART EQUIPMENT www.earhartequipment.com Tucson 520-889-6396

WAGNER EQUIPMENT CO. www.wagnerequipment.com Flora Vista 505-334-5522 (Rental) La Cruces 575-647-9700 Albuquerque 505-938-2000 (Rental) 505-345-8411 Hobbs 575-393-2148 (Rental) 575-393-3665 Clovis 505-235-3294 (Rental) Farmington 505-327-5331

CASHMAN EQUIPMENT www.cashmanequipment.com 3300 St. Rose Parkway Henderson, NV 89052 702-649-8777 Fax: 702-633-4699 Elko 775-738-9871 Reno/Sparks 775-358-5111

WAGNER EQUIPMENT CO. www.wagnerequipment.com Aurora 303-739-3000 Denver 303-433-2727 (Rental) Carbondale 970-963-7368 (Rental) Commerce City 303-286-2300 (Rental) Colorado Springs 719-390-7316 (Rental) 719-635-1669 Granby 970-328-2080 (Rental) Gypsum 970-328-2080 (Rental) Hayden 970-276-3781

HAWAII HAWTHORNE CAT www.pacific.hawthornecat.com Hilo 808-961-3437 Kauai 808-245-4058 Kona 808-329-4521 Oahu 808-677-9111 Oahu 808-676-0227 (Rental) Maui 808-877-6538

OKLAHOMA OCT EQUIPMENT www.octequipment.com Clinton 580-323-3422 Oklahoma City 405-789-6812 Tulsa 918-437-5085

Silverthorne 970-262-3788 (Rental) Fort Collins 970-493-5005 (Rental) Grand Junction 970-245-6546 (Rental) 970-242-2834 Pueblo 719-544-0088 (Rental) 719-544-4433 Steamboat Springs 970-871-1990 (Rental) Windsor 970-278-1750 (Rental) Burlington 719-346-7880 (Rental) (719) 346-5132 Durango 970-259-2001 (Rental) 970-259-2001 Windsor 970-278-1750

TEXAS ANDERSON MACHINERY CO. www.andersonmachinery texas.com Corpus Christi 361-289-6043 Manor 512-272-8133 Pharr 956-781-5995 San Antonio 210-661-2366 Victoria 361-575-8111 HOLT CAT www.holtcat.com Dallas 214-342-6700 Ft. Worth 817-847-8880 Irving 214-342-6700 Waco 254-662-7377

GEORGE P. BANE, INC. www.banemachinery.com Tyler 903-597-6641 YELLOWHOUSE MACHINERY CO. www.yellowhouse.us Abilene 800-592-4468 Amarillo 800-658-9868 Lubbock 800-658-9878 Odessa 800-658-9888 San Angelo 800-658-9130 Wichita Falls 877-658-9877 MUSTANG CAT www.mustangcat.com Houston 713-460-2000 Beaumont 409-892-8412

Bryan 979-775-7368 Bryan 979-775-0639 Channelview 281-452-7368 Conroe 936-756-1110 El Campo 979-543-3389 Freeport 979-233-7368 Houston 713-462-9993 Houston 713-228-7368 LaMarque 409-935-7000 Lufkin 936-639-5551 Lufkin 936-632-6775 Nederland 409-722-7368

WAGNER EQUIPMENT CO. www.wagnerequipment.com El Paso 915-493-5005 (Rental) 915-821-7651

CALIFORNIA HAWTHORNE CAT www.hawthornecat.com San Diego 800-437-4228 Lakeside/San Marcos (Rental) 800-750-4228 HOLT CALIFORNIA www.holtca.com Pleasant Grove 916-921-8969

Built from a lineage of market leaders for over 60+ years

QUINN CAT www.quinncompany.com 10006 Rose Hills Road City of Industry, CA 90601 888-842-2155 Fax: 562-692-1843 Bakersfield Corcoran Firebaugh Foothill Ranch Fresno Lancaster Los Angeles Oxnard Salinas Santa Maria Sylmar

Page 30 â€¢ October 19, 2013 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ October 19, 2013 â€¢ Page 31

The new LBX Link-Belt X3 series of excavators offer a variety of features that combine to make WKLV WKH PRVW IXHO HIÂ¿FLHQW DQG HQYLURQPHQWDOO\ IULHQGO\ /LQN %HOW VHULHV HYHU Â‡ (QKDQFHG K\GUDXOLFV LQFUHDVH VSHHG DQG HIÂ¿FLHQF\ Â‡ 7KUHH LGOH PRGHV KHOS WR HOLPLQDWH IXHO ZDVWH Â‡ (3$ FHUWLÂ¿HG 7LHU $ FRPSOLDQW ,VX]X HQJLQHV Â‡ (DV\ PDLQWHQDQFH ZLWK JURXQG OHYHO DFFHVV WR DOO Â¿OWHUV Â‡ 6HWXS DQG WUDFN VHUYLFH LQWHUYDO WLPHV RQ GLIIHUHQW LWHPV ZLWK RXU QHZ +' Â´ /(' PRQLWRU Â‡ 6HW DX[LOLDU\ K\GUDXOLF Ã€RZV DQG SUHVVXUHV IURP LQVLGH WKH FDE PRQLWRU IXHO XVDJH DQG REVHUYH WKH QHZ UHDU YLHZ FDPHUD RQ WKH FRORU /(' PRQLWRU Â‡ 2QH SLHFH UHLQIRUFHG WXUQWDEOH EHDULQJ WXE ZHOGHG RQ WKH WRS DQG ERWWRP IRU LQFUHDVHG VWUHQJWK Â‡ 1HZ ODUJHU UHLQIRUFHG 5236 FHUWLÂ¿HG FDE ,Q DGGLWLRQ WR WKHVH LPSURYHPHQWV DOO ; H[FDYDWRUV FRPH ZLWK WKH EHVW VWDQGDUG ZDUUDQW\ LQ WKH LQGXVWU\

Visit your Link-Belt excavator dealer today and experience the X Factor for yourself. ; 0DFKLQH 6SHFLÂ¿FDWLRQV 210 X3

250 X3

250 X3 LF

300 X3

350 X3

470 X3

47,840 lbs

55,336 lbs

61,950 lbs

65,918 lbs

80,028 lbs

111,554 lbs

Arm:

9 ft 8 in

9 ft 10 in

26 ft 3 in

10 ft 5 in

10 ft 8 in

11 ft 1 in

Bucket Weight:

1,440 lbs

1,790 lbs

750 lbs

1,940 lbs

2,580 lbs

3,350 lbs

160 hp

177 hp

207 hp

266 hp

362 hp

Max. Dig Depth:

21 ft 10 in

22 ft 8 in

47 ft 9 in

23 ft 4 in

24 ft 1 in

24 ft 10 in

ISO Breakout Force:

24,730 lbf

29,000 lbf

9,060 lbf

34,400 lbf

40,020 lbf

46,310 lbf

Bucket Digging Force:

34,170 lbf

39,120 lbf

18,570 lbf

42,760 lbf

55,750 lbf

60,700 lbf

Weight:

Horsepower:

Swing Torque:

47,204 lbf-ft

55,243 lbf-ft

51,482 lbf-ft

68,151 lbf-ft

Bucket Range:

.61 - 1.75 yd

.76 - 2.43 yd

.50 - .86 yd

.76 - 2.43 yd 1.08 - 2.93 yd3 1.58 - 4.05 yd3

82,607 lbf-ft 110,634 lbf-ft

Page 30 â€¢ October 19, 2013 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ October 19, 2013 â€¢ Page 31

Visit your Link-Belt excavator dealer today and experience the X Factor for yourself. ; 0DFKLQH 6SHFLÂ¿FDWLRQV 210 X3

250 X3

250 X3 LF

300 X3

350 X3

470 X3

47,840 lbs

55,336 lbs

61,950 lbs

65,918 lbs

80,028 lbs

111,554 lbs

Arm:

9 ft 8 in

9 ft 10 in

26 ft 3 in

10 ft 5 in

10 ft 8 in

11 ft 1 in

Bucket Weight:

1,440 lbs

1,790 lbs

750 lbs

1,940 lbs

2,580 lbs

3,350 lbs

160 hp

177 hp

207 hp

266 hp

362 hp

Max. Dig Depth:

21 ft 10 in

22 ft 8 in

47 ft 9 in

23 ft 4 in

24 ft 1 in

24 ft 10 in

ISO Breakout Force:

24,730 lbf

29,000 lbf

9,060 lbf

34,400 lbf

40,020 lbf

46,310 lbf

Bucket Digging Force:

34,170 lbf

39,120 lbf

18,570 lbf

42,760 lbf

55,750 lbf

60,700 lbf

Weight:

Horsepower:

Swing Torque:

47,204 lbf-ft

55,243 lbf-ft

51,482 lbf-ft

68,151 lbf-ft

Bucket Range:

.61 - 1.75 yd

.76 - 2.43 yd

.50 - .86 yd

.76 - 2.43 yd 1.08 - 2.93 yd3 1.58 - 4.05 yd3

82,607 lbf-ft 110,634 lbf-ft

Page 32 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Emergency Relief....

Kirby-Smith Demo Day Features World’s USDOT to Help First Automated Grade Control Dozer N.M. With Flood Road Repairs

The Odessa, Texas, branch of KirbySmith Machinery Inc. sponsored a demo day on Oct. 8, featuring the world’s first automated grade control dozer, the Komatsu D61i-23 and the world’s largest variable reach forklift, the 49,600 lb. (22,498 kg) capacity Manitou MHT 10225 rough terrain forklift. Branch Manager George Denny and his crew orchestrated the event and made sure that all participants had a hands-on trial of the new Komatsu dozer and an up close in-depth view of the new Manitou variable reach forklift. More than 80 people attended the event and were not only exposed to the attributes of new equipment, but also were treated to onsite grilled hamburgers and all the trimmings. Along with the knowledgeable Kirby-Smith Machinery staff demonstrating the D61i-23 dozer, all Manitou related questions were fielded by Fabien Ledebt, America’s market and sales support manager; Kevin Jessica Buchanon of Midland Caldwell, district development manag- County Road Department has just er; and Heavy Equipment Specialist finished operating the D61 EXi with Chris Shoots at the controls of the Kirby-Smith’s James McDonnell. MHT 10225 forklift. As a demonstration of the lifting capacity of the MHT 10225, Kirby-Smith lifted a 20,000 lb. (9,072 kg) forklift 32 ft. (9.8 m) high and extended the reach 8 ft. (2.4 m). The new D61i-23 is the first automated grade control dozer in the world. “It is so simple to operate that it takes a novice dozer operator to a seasoned grade control operator in just a few hours,” said Denny.” The D61i-23 is a dream to operate and meets all the requirements of the Tier IV standards and Manitou’s Chris Shoots (L) and Fabien Ledebt Eamonn Young (L) of Shell Exploration & includes the factory tell Production Company in Houston, Texas, all installed Intelligent about the MHT 10225. Machine Control for finished grade accuracy, Denny contin- keep our customers totally appraised of ued. “With its power and safety fea- all our new products and technologies tures, the 24.8 ton Manitou rough ter- as they come on line,” The D61i-23 dozer is Tier IV comrain forklift is suited perfectly for the harsh oilfield work environment. We at pliant, boasts the factory installed Kirby-Smith were most pleased with Intelligent Machine Control system for the turn-out and plan to have periodic automatic control finished grade accuDemo Days in the future in order to racy, is equipped with a 168 hp (125

ALBUQUERQUE, N.M. (AP) Storm-weary New Mexico is getting some help from the federal government on flood cleanup. The U.S. Department of Transportation will make immediately available $2 million in emergency relief funds to help the state cover the costs of repairing roads and bridges damaged by severe storms in September. The storms overflowed rivers, sparking massive flooding, forced evacuations and damaged roads. Officials say roads and bridges in counties and tribal areas in the state were washed out or severely damaged, including a section of I-40 about 30 mi. west of Albuquerque, where a sinkhole formed. In addition, Los Alamos National Laboratory on Sept. 20 reported millions of dollars in damages to environmental monitoring stations around the property due to heavy rain and flooding.

“Communities across our state are cleaning up from devastating floods, and many are facing expensive repairs to roads and bridges and other public infrastructure that is critically important in their daily lives.’’ Tom Udall U.S. Senator

The 24.8 ton (22.5 t) Manitou 10225 rough terrain forklift can extend to 32 ft. (9.8 m) in height and has a reach of more than 19 ft. (5.8 m) from the ground.

kw) engine and has the power angle tilt 4.5 or 5.0 cu. yd. (3.4 or 3.8 cu m) blade. The 24.8 ton (22.5 t) Manitou 10225 rough terrain forklift can extend to 32 ft. (9.8 m) in height and has a reach of more than 19 ft. (5.8 m) from the ground. With a 58 degree tilt, it is equipped with a safety system (LMI) shut down when the boom and load and are too high and placed at more than 58 degrees. For more information, call George Denny at 877/794-1800. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

According to the federal DOT, repairs from the September storms in New Mexico are so far estimated to be at least $9 million. The number is expected to increase as officials continue to assess the damages. The initial $2 million will be provided through the Federal Highway Administration’s Emergency Relief Program. It will be used to reimburse the state for emergency work. U.S. Sen. Tom Udall, D-N.M., praised the move by the department. “Communities across our state are cleaning up from devastating floods, and many are facing expensive repairs to roads and bridges and other public infrastructure that is critically important in their daily lives,’’ Udall said in a statement. A spokesman of Gov. Susana Martinez said the governor’s office was pleased with the federal help, especially after witnessing the damage herself. “The governor has traveled around the state, from Las Vegas to Mogollon to Cloudcroft, and saw firsthand the devastation these rains have caused,’’ Martinez spokesman Enrique C. Knell said (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

SECTION

Trucks & Trailers Pages 33-35

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Rogers Offers Multiple Configurations for Specialized Hauler Anchor36 Trucking LLC, located in Kenner, La., specializes in transporting oversize, overweight and difficult loads. In order to maximize their ability to haul a wide variety of specialized loads, Courtney Brauninger, president and co-founder of the company, approached Rogers Brothers Corporation with a request for a design that would allow them to reconfigure a single trailer for multiple purposes. Rogers manufactured a trailer

with interchangeable platform and I-beam decks. A drop-side deck can be added at a later date. Because Anchor36 focuses on the construction industry, a “bucket pocket” and “boom trough” were built into the platform deck to nestle excavator’s booms and buckets for increased overhead clearance. Rogers new CobraNeck, multiple ride height gooseneck is enhanced by a 72 in. (183 cm) gooseneck extender for a 3-axle

jeep dolly. The rear frame has removable/flip 4th and 5th axles with air lift on the 3rd axle and a self-equalizing “nitro” spreader. Depending on the configuration, the trailer is rated at either 90 or 70-ton (82 or 63 t) capacity. For more information, call 800/441-9880 or visit www.rogerstrailers.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Henderson’s New BlackBelt Maxx Ideal for Municipalities Municipalities utilize a number of truck body styles and equipment for material hauling and snow and ice control duties. Combination bodies have come closest to delivering a single body style capable of doing it all and being relied upon as an all-season body. Yet, all of these body styles (including combination bodies) encounter limitations of some sort. Henderson Products Inc.’s BlackBelt Maxx is a new class of work truck body, the first true “Universal Body,” according to the manufacturer.

The BlackBelt Maxx’s capabilities include: antiice applications, deicing applications, pre-wet applications, salt slurry generation, material hauling and high volume material conveying.

The BlackBelt Maxx’s capabilities include: antiice applications, deicing applications, pre-wet applications, salt slurry generation, material hauling and high volume material conveying, perfect for feeding asphalt pavers or for shouldering projects. The unit handles salt, sand, gravel, medium sized rock, asphalt, snow, leaves, dirt, ash, mulch and much more. The BlackBelt Maxx’s features include: load sense belt tensioning, 54 in. (137 cm) wide pure belt design (no chain maintenance), planetary drive system (providing 75 percent roller-to-belt engagement), low working center of gravity (no hoist, avoiding interference with all overhead obstacles), steep 71 degree sloped side walls (material rests on the floor, not on the side walls), high capacity hopper, high capacity anti-ice liquid tanks, high volume material output, controlled load management and the system is available in 10 to 18 ft. (3 and 5.5 m) body lengths. And finally, the BlackBelt Maxx expands Henderson’s growing lineup of green products with its anti-ice applications, deicing applications, prewet applications, salt slurry generation, precision material placement and multi-tasking capabilities. For more information, call 563/927-2828 or visit www.hendersonproducts.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) Rogers modular trailer meets the needs of specialized haulers.

Page 34 • October 19, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • October 19, 2013 • Page 35

Saving the Planet One Gallon at a Time...

Mack Teams Up With Shell to Encourage Use of LNG Mack Trucks announced a collaboration with Shell to coordinate efforts and support activities that encourage the use of liquefied natural gas (LNG) as a fuel for commercial vehicles. “Mack has had natural gaspowered vehicles in customer service since 2009, and we look forward to working with Shell and other fuel providers to further support the burgeoning natural gas truck market here in North America,” said Kevin Flaherty, president of Mack Trucks North American Sales & Marketing. The agreement will foster collaboration on multiple issues, including emissions and fuel specification, as well as increased knowledge sharing. This agreement is not exclusive and does not prevent Mack from working with other partThe natural gas-powered Mack TerraPro model is ideal for refuse applications. ners.

Trail Ox Family Well-Suited for Range of Applications Ox Bodies is formally introducing its new Trail Ox series of steel end dump trailers. The Trail Ox family of trailers is well-suited for a range of applications from sand-to-large aggregates, to riprap and asphalt, according to the manufacturer. Designed for long-term reliability and profitability, the product line comes in full and quarter-frame versions with three body styles in square bottom “L”, elliptical “U” and a “J” body, which is a cross between the “U” and “L”. Trailers feature widths of 96 and 102 in. (244 and 259 cm), side heights of 36 to 66 in. (91 to 167 cm), lengths of 22 to 36 ft. (6.7 to 11 m) and capacities from 11.4 to 51.2 cu. yds. (8.7 to

The Trail Ox family of trailers is well-suited for a range of applications. (This story also can be 39 cu m). All trailers have a found on Construction continuous seam-welded design that reduces debris Equipment Guide’s Web site collection and water-related at www.constructionequipbody and chassis corrosion. mentguide.com.)

Mack has long been a leader in alternative driveline solutions, and began offering a natural gaspowered Mack TerraPro refuse vehicle when it became clear that natural gas was a viable heavy-duty truck fuel for closedloop applications. The company also recently delivered its first natural gaspowered Mack Pinnacle model, offering an LNG solution for onhighway applications. Mack also announced plans to launch a natural gas-powered Mack Granite for the construction segment in 2013. Both models will be equipped with the Cummins Westport ISX12G spark-ignited engine, which can run on LNG as well as compressed natural gas (CNG). For more information, visit www.macktrucks.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Page 36 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Expo Features Record 1.17M Net Sq. Ft. Show Floor, 862 Exhibitors ICUEE from page 10

Felling Trailers liked the ICUEE outdoor area and were happy the rain held off. (L-R) are Daniel “Boone” Larson and Gary Knudsen, trailer sales; Marketing Dierctor Rebecca Gerads, and Patrick Jennissen, vice president of sales, with their FT-10CL 14 ft. (4.27 m) trailer with equipment, courtesy of Vermeer, Pella, Iowa. Cat Representative Kevin Coleman discusses features offered with the new Cat 299D compact track loader.

(L-R): Stahl Commercial Truck Equipment’s Hanna Sanford, Todd Hughes, Craig Aszkeler and John Henley were on hand to talk about the SCX/HDX heavy duty crane body equipped with an 8,000 lb. (3,629 kg) crane.

(L-R): Brian Heffron, Jim Brown and Tony Gentile of Palfinger talked with attendees about their Pal Pro 43 mechanic truck equipped with the PSC 6025 crane.

(L-R): On hand at ICUEE is the Polaris team of Kaitlin Corner, public relations and marketing; Jamie Juliano, national accounts manager; Jim Blaze, also national accounts manager; and Aaron Stegemann, business development manager.

James Perschke, vice president of global sales, Vanair, addresses the media during the press conference for Vanair.

Kevin Yu, Link-Belt Cranes engineer, stopped by the Volvo exhibit to try his hand at a L35B pro wheel loader.

Representatives of Ultra-Shore Products were in agreement that this was a productive show. (L to R) are Vince Compos, Denver, Colo.; Gary Hooks, Atlanta, Ga.; Bob Hackworth, Salt Lake City, Utah.; Grant Lamberson, Atlanta, Ga; and Keith Lamberson, Atlanta, Ga.

SECTION

Attachments Pages 37-41

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

EZ SPOT UR Rotating Pole Setter Rotates 127 Degrees

Two different Pro Series hydraulic thumbs are available to match the requirements of the job — whether it’s land clearing, site preparation and clean-up, forestry or residential demolition.

Cat Pro Series Hydraulic Thumbs Expand Versatility Cat Pro Series hydraulic thumbs expand the versatility of Cat hydraulic excavators in the 311 through 329 model range and deliver high performance and compatibility with today's Cat excavators, buckets and couplers. Pro Series thumbs mount on the bucket pin and move along the same arc as the bucket edge, providing solid grip and precision as the bucket curls. The operator controls the thumb independently of the bucket to position it as needed for precise picking, sorting and material placement. Two different Pro Series hydraulic thumbs are available to match the requirements of the job — whether it’s land clearing, site preparation and clean-up, forestry or residential demolition. Pro Plus thumbs cover the bucket through 100 percent of its rotation, and Pro thumbs cover as much as 70 percent of bucket rotation. The Pro Plus thumbs add load control at the extremes of the machine and bucket working ranges, which can be needed for tasks such as building high rock walls or loading high-sided

trucks, or when working below grade close to the excavator. All Pro Series hydraulic thumbs enable the thumb teeth to move with the bucket edge, which enhances operator control. Additionally, the thumb frame spans the width of the bucket for good control of longer, wider loads — such as limbs or poles. The inner curve of the thumb frame naturally cradles material, and serrations help hold material firmly. Thumb frames are field proven to last in a wide range of demanding applications. Cat buckets, quick couplers and thumbs form an integrated system. Cat Pro Series hydraulic thumbs extend Cat excavators beyond their primary applications as digging machines, which can help contractors increase machine utilization and income, according to the manufacturer. For more information, visit www.cat.com/attachments/thumbs (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The EZ SPOT UR rotating pole setter attaches to any machine and handles poles of all shapes up to 32 ft. (9.7 m) in length. The EZ SPOT UR pole setter can be attached to a rotating base that allows the attachment to rotate 127 degrees and it also can be attached to a fixed non-rotating base if rotation is not necessary. The oneman operation of the Rotating Pole Setter decreases the time it takes to place poles and reduces the manpower needed to complete a job, according to the manufacturer. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.

The EZ SPOT UR rotating pole setter handles poles of all shapes up to 32 ft. (9.7 m) in length.

Side Shooter Ideal Cutter for Side Profiling Attachments International’s asphalt cutter, the “side shooter,” is an ideal cutter for side profiling and cutting shoulders. It is double the strength of previous AI bucket mount cutters, according to the manufacturer. Features include quick disconnect — less than 1 minute; flush mount external or internal on bucket, blades or moldboards; AI-X400 alloy; and chromed induction hardened axles.

Page 38 • October 19, 2013 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Montabert New CPA 225E Drilling Attachment Delivers Optimal Power Designed for use on excavators ranging in size from 15 to 25 tons (13.6 to 22.6 t), the Montabert CPA 225E drilling attachment enables operators to transition from digging to drilling in a matter of minutes. The CPA 225E drilling attachment is easily transported between job sites, delivering optimal drilling power in the blast hole, slide stabilization, tunneling, anchor bolting and other long-reach applications. The 3,197-lb. (1,450 kg) CPA 225E drills holes measuring 1-1/2 to 3 in. (3.8 to 7.6 cm) in diameter and up to 14 ft. (4.3 m) deep. The addition of an optional 12-ft. (3.6 m) rod adder enables the CPA 225ER to reach a drill depth of 26 ft. (7.9 m). Standard features on the single-pass CPA 225E drilling attachment include an aluminum feed — providing 47 degrees of drill rotation — as well as a high performance Montabert HC50 drifter. The HC50 is equipped with a proactive hydraulic dampener and an energy recovery system to ensure a long life span for the striking bar and provide high efficiency drilling performance. In addition to ensuring

straight hole drilling, the HC50 drifter delivers progressive blows while absorbing and recovering reflected energy — safeguarding various components of the drilling attachment from damage. The Intelsense system is essential to the CPA 225E drilling attachment’s overall performance. This radio-controlled performance-managing feature automatically analyzes drilling conditions and adjusts factors such as feed pressure, feed speed, anti-jamming controls and percussion pressure. The radio remote control capabilities of the CPA 225E allow the drilling attachment to be operated from outside the excavator’s cab, eliminating difficult and expensive excavator customization. A hydraulic dust collector is standard on the CPA 225E, offering high suction capacity or the use of a water injection system. For more information, visit www.montabert.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

The 3,197-lb. (1,450 kg) CPA 225E drills holes measuring 1-1/2 to 3 in. (3.8 to 7.6 cm) in diameter and up to 14 ft. (4.3 m) deep.

Roadrunner C Series Evolves With Bolster Wheels Addition The Roadrunner C series grader-spreader-maintainer has evolved to become the Super “C” with the addition of bolster wheels. It retains its ability to grade packed gravel, especially with the serrated cutting edge and it continues with independent adjustment to each side to create and maintain a crown and controls depth of cut. The long skid bars prevent dipping and gouging, and the side panels eliminate windrows and retain the material within the area being graded. Angled dual blades prevent washboards. For more information, call 410/420-1777 or visit www.roadrunnerblade.co m.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • October 19, 2013 • Page 39

Page 40 • October 19, 2013 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Construction Equipment Guide â€¢ Attachments & Parts Section â€¢ www.constructionequipmentguide.com â€¢ October 19, 2013 â€¢ Page 41

PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!

Â® Position your bucket, not your machine.

Perform work faster, safer and easier with your excavator or backhoe. * Use offer code CEG013. Expires 12-31-13

'3&& 4)*11*/( wit

h your ne xt PowerTiilt order*

XXX IFMBD DPN t 183 5*-5

Page 42 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 43

Powering Your Productivity ...For Over A Century

Portable Power

Air Compressor Solutions, Inc.

Ditch Witch of Arizona

Volvo Construction Equipment & Services

Pape Material Handling Inc. / Bobcat West

TEXAS

ARIZONA

CALIFORNIA

Odessa (432) 335-5900

Phoenix (602) 437-0351

Bakersfield (661) 387-6090

Air Compressors & Light Towers: New, Rental, Rental Sales, Generators: Rental Only

Ditch Witch of Southern Arizona ARIZONA Tucson (520) 579-0261

Fresno (559) 834-4420 San Leandro (510) 357-9131 Sacramento (916) 388-2244 San Diego/Lakeside (619) 441-3690

www.papemh.com

www.bobcatwest.com

OREGON

WASHINGTON

7000 SW Sandburg Rd. Portland (503) 639-8910 7909 N. Upland Dr Portland (503) 286-6400 29550 Airport Road Eugene (541) 689-7407 Medford (541) 779-3444

Seattle (206) 722-5800 Arlington (360) 474-8461 Fife (253) 926-4386 Bellingham (360) 756-6572 Yakima (509) 248-5636 Pasco (509) 545-1959 Wenatchee (509) 884-2934 Spokane (509) 536-7300

NEVADA Sparks (775) 356-9333

Corona (951) 277-7620

Pacific Power Products www.pac-power.com Generators: Rental & New Sales

WASHINGTON 6100 So. 6th Way Ridgefield (800) 882-3860 (360) 887-5900 7215 So. 228th Street Kent (800) 882-3860 (253) 854-0505 6615 East Mallon Ave. Spokane

OREGON

TEXAS

2343 Biddle Rd. Medford

Arlington (817) 633-1010

1203 SW Lake Rd. Redmond

Houston (713) 681-9221

Find Us on

DoosanPortablePower.com

(800) 633-5206

Page 44 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ConExpo 1987 Las Vegas, Nevada CONEXPO from page 15

Coming next issue: Everything stays in Vegas — including ConExpo 1993.

BusinessCalendar To view our Business Calendar online, go to www.constructionequipmentguide.com.

AGC ST. LOUIS IF IT’S NEW, IT’S HERE! CONEXPO-CON/AGG will represent an immense unveiling of all the newest equipment, technology and product breakthrough in construction. From earthshaking big iron to groundbreaking innovations, it’s all assembled in one place to help you work smarter. CONEXPO-CON/AGG 2014 – If it’s new, it’s here! CONEXPO – CON/AGG 2014 – if it’s new, it’s here! MARCH 4 thru 8, 2014 LAS VEGAS, NEVADA USA LAS VEGAS CONVENTION CENTER CONEXPO-CON/AGG 2014 WILL FEATURE: . 2,400 exhibitors showcasing new products and technologies from for every major construction industry including asphalt, aggregates, concrete, earthmoving, lifting, mining, utilities and more. . Over 130,000 attendees that range from contractors, to dealers & distributors, to service providers, engineers, producers, municipalities, and more. . A comprehensive education program during the five-day exposition with sessions emphasizing industry issues and trends, management and applied technology. For more information, please contact AGC of St. Louis, 6330 Knox Industrial Drive, Suite 200, St. Louis, MO - Phone: 314/781-2356; Fax: 314/781-2874. Ohio Aggregates & Industrial Minerals Association November 14 – 15, 2013…Annual Meeting & Trade Show 2013 Columbus Hilton at Easton, Columbus, OH The OAIMA 2013 Annual Meeting offers a lot of useful information! We have many interesting and entertaining speakers this year! Economics – Negotiations – Media Sense – State and National Information and Entertainment at its best! Registration and Sponsor Information is available on the OAIMA website: www.oaima.org.

Minnesota Nursery & Landscape Association (MNLA) Super Tuesday: Landscape Lighting Design & Technology (PLT Relicensure) Date: January 7, 2014 Time: 8:00 AM CST to 5:00 PM CST Location: Minneapolis Convention Center, 1301 2nd Avenue S., Minneapolis, MN SAVE THE DATES!!! Please note: Advance Registration is required for Super Tuesday proAGC of MINNESOTA: grams. No onsite registration will be taken for Super Tuesday. Class Mark your Calendar for these Fall Events: # 20130421…this class provides a total of eight hours of continuing ANNUAL MEETING – NOVEMBER 20th, at the Radisson Blu education credits for the Power Limited technician license, with mateMall of America. Attend for the education and networking, stay rial orientated specifically towards the landscape lighting specialist. for the shopping and to experience this beautiful new property. You may contact the MNLA at 651/633-4987 for more information. Sleeping room registrations must be made no later than October 28th, by calling 800/333-3333, thru the hotel’s website Minnesota Nursery & Landscape Association (MNLA) MNLA CEO Symposium – Workforce 2020: Preparing for What (and (www.radissonblumoa.com). Who) the Future will Bring Date: January 7, 2014 AGC of Minnesota Supervisory Training Program – September to October 2013 Classes Time: 4:00 PM CST to 8:30 PM CST Four of Ten Supervisory Training Program (STP) courses from AGC of Location: Hyatt Regency Hotel, 1300 Nicollet Mall, Minneapolis, MN In order to position your organization to attract top talent, drive breakAmerica are being offered in the evenings, from 5:00 to 8:00 PM, at throughs, and serve customers better, employers need to understand the AGC of Minnesota office at 525 Park Street, Suite 110, Capitol and prepare for the evolution of the workforce. In this presentation, Office Building, St. Paul. These courses typically run 5 to 7 weeks CEO’s will learn about the chief workforce indicators of change, how (one day a week). Free parking is available adjacent to the building. to position their companies to be innovative and responsive to these For more information on the AGC of Minnesota Supervisory Training changes to attract top talent and win in the marketplace. Presented Program, please contact Pat Lynch at 651/796-2181 or 800/552- by Sarah Sladek, Founder and CEO of XYZ University and a renowned 7670, ext. 201. Email: plynch@agcmn.org. speaker who delivers clear value to audiences committed to bridging the generational gap and creating sustainable organizations. For more information on this Symposium, you may contact the MNLA at Mark your calendar!!! 651/633-4987. November 22, 2013 - Diamond Annual Open House, Evansville, IN OOGA Oilfield Expo 2013 www.diamondequipment.com...More information to follow! 2013 Oilfield Expo and Safety Congress Minnesota Nursery & Landscape Association Date: December 3 – 5, 2013 2013 Irrigation Show & Education Conference – Austin, Texas International Exhibition (IX) Center November 4, 2013 to November 7, 2013 Cleveland, Ohio Time: All Day The 2012 Oilfield Expo was a success! We’ve listened, and are Location: Austin Convention Center, Austin, Texas preparing to assure that 2013 will be better than ever. The Where Irrigation Meets Innovation What better place to think about changing things up than in Austin, OOGA Oilfield Expo is the largest event of its kind in the eastern Texas? A place to be different and stand out from the crowd. A place United States. The I-X Center is an impressive facility, uniquely where energy and creativity run high and diverse ideas come togeth- capable of housing the wide array of equipment and services er. This year’s show is the place to uncover opportunity, launch new deployed in the oilfield. Exhibit space has been expanded and ideas, up your game and have fun! For more information, please con- refined, a Safety Congress component has been added, industact the MNLA office phone at 651/633-4987; Toll Free: 888/886- try-specific training are being offered, and completed with the 6652 or email mnla@mnla.biz; Fax: 651/633-4986; Toll Free Fax: Fall Technical Conference and Oilfield Symposium – bringing the decision makers, industry professionals, and suppliers together 888/266-4986. Hotel information – Hilton Columbus, 3900 Chagrin Drive, Columbus, OH – for reservations call: (614) 414-5000. For more information on this meeting, please call toll free: 800/OHROCKS (647-6257) Phone: 614/428-7954 Fax: 614/428-7919 Email: rocks@oaima.org.

at one very impressive venue. The 2013 Oilfield Expo and Safety Congress will kick off with the Oilfield Expo Welcome Reception at the Rock & Roll Hall of Fame 1100 Rock and Roll Blvd., Cleveland, OH 44114 (East Ninth Street at Lake Erie) from 7:00 to 11:00 PM on Tuesday, December 3rd. For more information on this event, you may call the OOGA office at 614/824-3901. 19th Annual New York State Highway and Public Works Expo will be held on October 16, 2013 in the Americraft Center of Progress at the New York State Fairgrounds in Syracuse, NY. Free admission tickets are sent to every village, city, town, county and state highway and public works professional in New York State. Exhibitors from around the state and the nation will gather in Syracuse for the annual Expo that puts them face to face with municipal budget decision makers. Superintendents, Board Members, Engineers, Municipal Contractors…they’re all at the Expo! The Expo is held at the peak of the annual budget decision making process in municipalities across the state…A great time to showcase what you sell, make new contacts, introduce new products and strengthen relationships with your existing municipal customers! GIE+EXPO – The Green Industry & Equipment Expo Dealer Day: October 23, 2013 All Attendees: October 24 and 25, 2013 Kentucky Expo Center Louisville, Kentucky Two Tradeshows – GIE+EXPO and Hardscape North America – colocated in one central location, provide your No. 1 opportunity to see what your industry is buzzing about. The 29-acre Outdoor Demonstration Area, within easy walking distance of the indoor exhibits, and the New Products Showcase make these prestigious shows an exceptionally efficient, productive marketplace. The 2012 GIE+EXPO runs October 24 & 25 in Louisville, KY. Colocated again this year with Hardscape North America, the industry’s largest trade show will host more than 15,000 attendees. For details on education sessions, produce demonstration schedules and to register, visit www.gie-expo.com or www.HardscapeNA.com. Future Show Dates: October 22-24, 2014; October 12-23, 2015; October 19-21, 2016 Info@gie-expo.com/phone 800/558-8767, 812/949-9200; Fax: 812/949-9600

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ October 19, 2013 â€¢ Page 45

ASCO SUPPLY CO., INC. Austin, TX San Angelo, TX San Antonio, TX Wichita Falls, TX www.ascoeq.com

512/272-8922 325/655-5666 210/333-8000 940/687-2726

ABILENE NEW HOLLAND, LTD. Abilene, TX www.anhltd.com

800/382-9271

DEALER IMPRINT AREA

AMARILLO MACHINERY CO. Amarillo, TX www.amarillomachinery.com

888/309-7800

BANE MACHINERY INC. Dallas, TX Ft. Worth, TX Tyler, TX www.banemachinery.com

800/594-2263 800/601-2263 800/594-2200

AN E.P.I.C. GENERATION

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT Oklahoma City, OK 405/917-9191 Tulsa, OK 918/835-7200 www.oklahomaterritoryequipment.com

EFFICIENT

APCO EQUIPMENT

POWERFUL

North Las Vegas, NV www.apcoequipment.com

800/574-4089

INTELLIGENT

TRI-WEST TRACTOR, INC. Livermore, CA www.tri-westtractor.com

925/455-8200

)HYYL[[ 7HYR +YP]L Â‹ :\P[L )HYYL[[ 7HY Kennesaw, Georgia 30144 eo www.kawasakiloaders.com kilo

RASMUSSEN EQUIPMENT CO. West Valley City, UT 800/453-8032 www.rasmussenequipment.com

CLM EQUIPMENT CO. INC. Lafayette, LA Prairieville, LA Sulphur, LA Houston, TX www.clmequipment.com

225/677-7838 337/625-5942 281/598-2500

> > > COMFORTABLE

Page 46 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

POWER MOTIVE CORPORATION 5000 Vasquez Blvd. Denver, CO 80216 303-355-5900 Fax: 303-388-9328 Colorado Springs, CO 719-576-5541 Grand Junction, CO 970-241-1550 Milliken, CO 970-339-4098

As lo w as $ on a NEW /mon OR D DX225LC th L250 Ask y -3 Wh 3 Excavat our D o oosa e r el Loa n dea der. ler ab out T

2,199

Durango, CO 970-259-0455 Cheyenne, WY 307-752-0273 www.powermotivecorp.com

arget ed Po werLe ase.

WAUKESHA-PEARCE INDUSTRIES, INC. 12320 S. Main Houston, TX 77035 713-723-1050 Fax: 713-551-0798 Tomball, TX 281-351-9016 Kilgore, TX 903-984-2011 Port Arthur, TX 409-721-5305 Corpus Christi, TX 361-884-8275

Not well-known, just really, really

Edinburg, TX 956-386-0107 San Antonio, TX 210-648-4444 Pflugerville, TX 512-251-0013

There are many brands of equipment out there, but only one that’s built its entire brand on delivering the best to operators, again and again. Like you, Doosan excavators are ready to keep at it until the job is finished. They’re protected with solid construction and heavy-duty features that keep you running longer—so you can make more money working and spend less of it in the shop. You might not know us as well as some of the other brands, but we’ll keep delivering long after you do.

A ARIZONA RIZONA D Ditch itch W Witch itch o off A Arizona rizona Ph Phoenix oenix

FFontana ontana 909-822-2200 909-822-2200

TEXAS TE X AS T Texas exas Timberjack, Timberjack, IInc. nc. 936-634-3365 936-634-3365

TTucson ucson

O OKLAHOMA KLAHOMA

Ja Jasper sp e r

doosan.ditchwitchaz.com doosan.ditchwitchaz.com

C CALIFORNIA ALIFORNIA M Mega ega Machinery Machiner y C Co., o., Inc. Inc. Lakeside Lakeside 61 619-561-7832 9-561-7832 • 8 855-872-3497 55-872-3497 www.megamachineryco.com w w w.meg amachiner yco.com

R RGW GW E Equipment quipment S Sales, ales, LLLC LC LLivermore ivermore 925-606-2456 925-606-2456 doosan.rgwequipment.com doosan.rg wequipment.com

H&EE Equipment quipment S Services, er vices, Inc. Inc. O Oklahoma klahoma Ci City ty 4 405-789-7368 05-789-7368

TTulsa ulsa 918-445-2666 918-445-2666 w www.he-equipment.com w w.he -equipment.com

ORE OREGON GON Feenaughty Feenaughty Machinery Machiner y C Co. o. Portland Por tland 503-282-2566 503-282-2566 www.feenaughty.com www.feenaught y.com

4460 Pioneer Way Elko, NV 89801 775-753-7557

LLufkin ufkin

602-437-0351 602-437-0351 • 8 888-316-3242 88-316-3242

w www.scottequip.com w w.scot tequip.com

5520-579-0261 20-579-0261 • 8 888-316-3242 88-316-3242

KOMATSU EQUIPMENT COMPANY 1486 South Distribution Drive Salt Lake City, UT 84104 801-972-3660

Authorized Authorized Doosan Doos an Dealers Dealer s

S Scott cott Equipment, Equipment, Inc. Inc.

Buffalo, TX 903-322-7150 www.wpi.com

4 409-384-4611 09-384-4611 w www.texastimberjack.com w w.texastimber jack .com

WASHINGTON W ASHINGTON C Cascade ascade T Trader, rader, Inc. Inc. Chehalis Chehalis 3 360-748-1182 60-748-1182 doosan.cascadetrader.net doosan.cascadetr ader.net

FFarmers armers Equipment Equipment Company Company Burlington Burling ton 3 360-757-6081 60-757-6081 • 888-855-4982 888-855-4982

3825 Losee Road North Las Vegas, NV 89030 702-399-1004 900 Marietta Way Sparks, NV 89431 775-356-1334 6253 West Gilbert Industrial Court Hurricane, UT 84737 435-986-1000 10790 South Highway 59 Gillette, WY 82718 307-682-1445

w www.farmersequip.com w w.f ar mersequip.com

Doosan Delivers * Limited time offer. Available at eligible and participating dealers only. Some restrictions apply. Please see participating dealer for details. Financing subject to credit approval of qualified buyers by authorized Doosan Infracore Construction Equipment America finance providers. Doosan reserves the right to discontinue this program at any time without prior notice. Price includes the machine and a standard bucket (quick coupler is optional). Lease amount is in U.S. dollars. Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2013 Doosan Infracore Construction Equipment America. All rights reserved. | 0913917

405 Jonah Drive Rock Springs, WY 82901 307-686-1300

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 47

KIRBY-SMITH MACHINERY INC. 6715 W Reno Oklahoma City, OK 73137 800-375-3339 405-495-7820 Fax: 405-787-5973 12321 E. Pine Street Tulsa, OK 74116 800-375-3733 918-438-1700 Fax: 918-437-7065 Abilene, TX 877-577-5729 325-692-6334

PC490LC-10 From Komatsu - The Excavator Experts

Amarillo, TX 800-283-1247 806-373-2826 Dallas, TX 800-753-1247 214-371-7777 Ft. Worth, TX 877-851-9977 817-378-0600 Lubbock, TX 866-289-6087 806-745-2112 Odessa, TX 877-794-1800 432-333-7000 www.kirby-smith.com

ROAD MACHINERY LLC 4710A E. Elwood • Suite 6-7 Phoenix, AZ 85040 602-252-7121 Fax: 602-253-9690 Gilbert, AZ 480-545-2400 Tucson, AZ 520-623-8681 Prescott, AZ 928-778-5621 Albuquerque, NM 505-345-8383 Farmington, NM 505-324-8601 El Paso, TX 915-872-1001 Bakersfield, CA 661-695-4830 Freemont, CA 510-659-1903 Perris, CA 909-355-3600 Redding, CA 530-229-3822 Sacramento, CA 916-375-3540 Cananea, Sonora, Mexico 011-52-6453328300 www.roadmachinery.com

The Komatsu PC490LC-10 provides more power, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs. t Efficient Komatsu Tier 4 Interim engine and advanced hydraulic system maximize productivity while providing up to 5% lower fuel consumption. t Increased lift capacity with a larger machine design and a reinforced undercarriage t Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

www.komatsuamerica.com www .komatsuamerica.com

Page 48 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Simplified profitability The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

SEE YOUR BARGAIN AD IN COLOR.

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-Quality Rubber Tracks to fit over 3000 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states...........................................................................................Call

Summit Supply LLC 888-888-1248 • sales@summittracks.us 21-22 TM

Dynapac’s complete line of rollers and pavers combine years of experience with innovative thinking to make the job as fast, simple, and profitable as possible, from beginning to end. F1000 series pavers: t Cummins QSB 6.7 liter interim Tier 4 engine t North American styling featuring the lowest deck height in the industry at 63 inches t Easy to use control panel with one touch auto fill and cleaning modes CA2500-CA4000 single-drum vibratory rollers: t Static linear loads of 140-252 pli t Active bouncing control t Cummins or Deutz interim Tier 4 engine

• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $95 per ad, $50 additional for color. • Your ad will run for two consecutive issues in 1 region. Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

for maximum performance, ease of maintenance and lower total cost of ownership, Built Dynapac’s rollers and pavers will provide you with more Uptime by Design.

www.dynapac.us

FOR 2 INSERTIONS

Here's how the BARGAIN ADS Work:

CP224, CP224W and CP274 pneumatic tired rollers: t Smooth start-stop system for directional changes t Wide-base tires t Air-on-the-run

C. L. BOYD CO., INC. BANE MACHINERY, INC. 4 RIVERS EQUIPMENT 4220 West Reno Ave. Colorado Springs, CO 2449 Manana Rd. Oklahoma City, OK 73107 Dallas, TX 1100 E. Cheyene Rd. 75220 800/OKC-BOYD 214/352-2468 719/475-1100 405/942-8000 Fax: 214/353-2460 www.4riversequipment.com Fax: 405/945-8569 Albuquerque Tyler 505/884-2900 Ardmore, OK 903-597-6641 866/720-2693 El Paso Ft. Worth 580/224-2693 915/598-1133 817/847-5894 Lawton, OK Farmington 800/633-2693 505/326-1101 580/355-6667 Fort Collins 970/482-7154 Frederick 303/833-5900 Hobbs 575/392-6923 BEE EQUIPMENT SALES Pueblo West www.dynapac.us LTD. 719/547-3505 2506 E. Slaton Rd. Lubbock, TX 79404 806/745-1511 Fax: 806/455-0593

ONLY $50 EXTRA

MODERN MACHINERY 4428 E. Trent Ave. Spokane, WA 99212 800/541-0754 22431 83rd Ave. S. Kent, WA 98032 800/669-2425 19444 Ivan Street SW Rochester, WA 98579 800/304-4421 5241 N.E. 82nd Ave. Portland, OR 97220 800/950-7779 4610 Cloudburst Way Eugene, OR 97402 800/826-9811 1257 West Amity Boise, ID 83705 800/221-5211 2666 Garrett Way Pocatello, ID 83201 800/829-4450 101 International Drive Missoula, MT 59808 800/332-1617 3155 Highway 93 S Kalispell, MT 59901 800-434-4190 7850 S. Frontage Rd. Billings, MT 59101 800/735-2589

CLASSIFIEDS Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200 ASPHALT EQUIPMENT

CRAWLER TRACTORS

Asphalt Cutters

Crawler Tractors 1977 Catapillar D6D, OROPS, Sweeps, Ripper, average condition...................................$37,500.

SEVERE SERVICE CUTTERS

913-915-1607

Was $3,425 ** SALE $2,579 **

EXCAVATORS Hydraulic Excavators

775-751-3849 218-863-6444

2006 Hyundai R500LC7A, Good condition, Call for hours...............................................$135,000.

attintl@loretel.net www.attachmentsintl.com www.attachmentsusa.co m

Liebherr R954 S/N 18170, Good condition, 4909 hours.....................................................$310,000. 440-439-4000

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 49

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. CAT140H MOTOR GRADER MODEL 2008 & ABOVE CONTACT: GETAHUNE JEMBERE PHONE: +251911739474 EMAIL: GECH@YAHOO.COM –––––––––––––––––––––––––––––––– CAT 345 WITH LESS THAN 5000 IN GOOD RUNNING CONDITION NEAR MICHIGAN. CONTACT: GREG PHONE: 313 410 3883 FAX: 866 809 9431 EMAIL:GREG.SCHNEIDER@MICHIGANCAT.COM –––––––––––––––––––––––––––––––– WE WANT TO KNOW WHO OWNS MARSH USE MARSH BUGGIES AND WE PAY SEVERAL $1, 000 FINDERS FEES IF THEIR INFO HELPS US FIND UNITS TO RENT BUY OR SELL. PLEASE SEND WHAT YOU HAVE, THANKS CONTACT: TYLER PALUMBO EMAIL: PALUMBO519@HOTMAIL.COM –––––––––––––––––––––––––––––––– INTERESTED IN A MOTOR GRADER 180 CONTACT: MRS KOSGEI PHONE: +254722790980 EMAIL: LILLYJAN2002@YAHOO.COM –––––––––––––––––––––––––––––––– LOADER | LOOKING FOR A LOADER TO FIX TS110 4X4. 645TL NH OR WOODS LU215 OR 7511 NH (OLDER UNIT) OR GB 660 LOADER CONTACT: RICHARD HEARRING PHONE: 615-394-1214 FAX: 615-941-8675 EMAIL:RHEARRING@COMCAST.NET –––––––––––––––––––––––––––––––– FORKLIFT | 5, 000 POUND CAPACITY, DOUBLE STAGE , PROPANE , SIDESHIFT CONTACT: FRANK PHONE: 253-475-4405 EMAIL: ELKLOVER9@CENTURYLINK.NET –––––––––––––––––––––––––––––––– LOOKING TO PURCHASE 1 - CATERPILLAR 140G MOTOR GRADER WITH ENCLOSED CAB AND RIPPER ASSY. CONTACT: GLENN RUSSELL PHONE: 360.314.7413 FAX: 360.727.3222 EMAIL:GLENN@VISTAEQUIPMENT.NET –––––––––––––––––––––––––––––––– TRI AXLE PETERBILT TRACTOR | PETERBILT TRI AXLE TRACTOR WITH 36" SLEEPER ALSO LOOKING FOR 4 AXLE RGN WITH A MINIMUM OF 24 IN THE WELL. CONTACT: WILLIE KIRCH PHONE: 201-444-6340 EMAIL: WILLIEKIRCH@GMAIL.COM –––––––––––––––––––––––––––––––– JD OR TAKEUCHI SKID STEER | 323 SIZE TRACK SKID STEER CONTACT: REED HOLLOWAY PHONE: 850-260-4536 EMAIL:RHOLLOWAY05240@YAHOO.COM ––––––––––––––––––––––––––––––––

CAT D5B LGP PYRAMID PADS NEEDED IMMEDIATELY. PLEASE CONTACT. CONTACT: RICH PHONE: 847-830-8398 EMAIL: GENYOSHA123@YAHOO.COM –––––––––––––––––––––––––––––––– WE BUY EQUIPMENT MANUALS| WE ARE LOOKING TO PURCHASE NEW OR USED SERVICE, SHOP, PARTS, OPERATOR’S OR OTHER MANUALS FOR EQUIPMENT, TRUCKS AND VEHICLES OF ALL SORTS. WE PREFER IN BULK, PERHAPS YOU HAVE COMPUTERIZED YOUR SERVICE OR PARTS OPERATION AND YOU HAVE BOOKS OR MANUALS YOU NO LONGER NEED, OR INVENTORIES YOU HAVE NOT SOLD. PERHAPS AS A DISCONTINUED PRODUCT LINE. WE WILL PURCHASE IN ANY USEABLE CONDITION IN ANY AMOUNT YOU HAVE. PLEASE FEEL FREE TO CALL US AT 270-849-2270 OR EMAIL US. CONTACT: GRACE FRANCES PHONE: 2708492270 EMAIL: TRITOWN1@MSN.COM –––––––––––––––––––––––––––––––– FINLAY 683 SUPERTRAK CONTACT: JUAN RAMON PHONE: 956-727-9100 FAX: 956-727-9102 EMAIL:JUANRAMONLARENA@HOTMAIL.COM –––––––––––––––––––––––––––––––– BULLDOZER CATERPILLAR | FROM ONLY USA D3AT D10 2003 AND UP ONLY CONTACT: JEAN MAURICE BOUTIN PHONE: 1 450 346 8975 OR MOB 1 514 386 8975 EMAIL:JEANMAURICEBOUTIN@VIDEOT RON.CA –––––––––––––––––––––––––––––––– LOOKING FOR AN UNMOUNTED KNUCKLE BOOM CRANE FROM 35 - 60 TON. PLEASE SEND ME INFORMATION CONTACT: FRANCISCO PHONE: 7865186885 EMAIL: NAVARRO.FRANCISCO@AOL.COM –––––––––––––––––––––––––––––––– USED 23 5 25 16 PLY GENERAL TIRES CONTACT: ELMER COX PHONE: 302-539-7200 FAX: 302-539-7251 EMAIL:ELMERMCOX@YAHOO.COM –––––––––––––––––––––––––––––––– TELEHANDLER 10, 000 LB AND UP, 42 FT AND UP, 4WD | PLEASE EMAIL ME, MODEL 2004 AND UP, USE HR, YEAR, PICTURES, LOCATION, ENGINE TYPE AND BRAND , GENERAL CONDITION (MOTOR, TRANSMISIÓN, HIDRÁULIC AND TIRES), MY BUDGET $50, 000. SEND PICTURES PLEASE. CONTACT: J.MAZARIEGOS EMAIL: JMAZARIEGOS@SANDIEGO.COM.GT ––––––––––––––––––––––––––––––––

NEED TO BUY USED CAT 14G MOTOR GRADERS, YEAR MODEL 79 - 95. PLEASE EMAIL ME WITH PICTURES, SERIAL NUMBER, MACHINE LOCATION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:INFO@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– TRACK SKID STEER AND 12000LB EXCAVATOR | WE ARE GOING TO HAVE TO REPLACE POSSIBLE TWO PIECES BEFORE JAN 1ST REPLACING A MTL25 MUSTANG AND OUR CAT 305 EXCAVATOR FOR TAX AS WELL AS THE CARB PROBLEMS CONTACT: JOE LUNNY PHONE: 1-415-254-5301 FAX: 1-267-630-6587 EMAIL: LUNNYENGINEERING@GMAIL.COM –––––––––––––––––––––––––––––––– CASE 336 BD ENGINE, USED OR SHORT BLOCK CONTACT: WORTHEN PHONE: 801-448-8954 EMAIL: JOHNNYEASI@GMAIL.COM –––––––––––––––––––––––––––––––– KOMATSU PC300 LC7/8 EXCAVATOR | NORTHEAST LOCATION, MAX 5000 HOURS, WORK READY CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– 2010 TEREX TX760B | TX760B - ONLY 806 HOURS - LIKE NEW. CONTACT ME FOR MORE INFORMATION CONTACT: HOPE PATTERSON PHONE: 800-369-4817 EMAIL: HOPE@BULLDIG.COM –––––––––––––––––––––––––––––––– MINE SKID STEER | WITH TRAILER AND ATTACHMENTS CONTACT: CARL JOHANSEN EMAIL: TERRI.CARL@GMAIL.COM –––––––––––––––––––––––––––––––– D7R SU BLADE | WANT TO TRADE, OR BUY SEMI U BLADE IN GOOD CONDITION FOR A D-7R CAT DOZER, HAVE A LOW HOUR 7A ANGLE BLADE TO TRADE. CONTACT: RON CHAMBERS PHONE: 801-430-2773 EMAIL: CATSKINNER8R@YAHOO.COM –––––––––––––––––––––––––––––––– MCELROY 1236 FUSION MACHINE CONTACT: JOHN GUSTAFSON PHONE: 206-396-4558 FAX: 360-474-0195 EMAIL: JG@TRENCHLESSCONSTRUCTION.COM –––––––––––––––––––––––––––––––– CAT D6K OR D5K LGP DOZER | CAB OR OPEN. LESS THAN 3000 HOURS. MID TO EAST USA LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD1@COMCAST.NET ––––––––––––––––––––––––––––––––

WANT TO BUY FRONT END LOADER DRESSER FORKS FOR 510 LOADER OR TRADE 4-IN-1 BUCKET FOR DRESSER 510 WITH ACS HOOK-UP. CONTACT: CHUCK COHEN PHONE: 630-816-8344 EMAIL: CCOHEN@TIRESNTRACKS.COM –––––––––––––––––––––––––––––––– MIXER DRIVE | WE ARE LOOKING FOR ALL KIND ZF MIXER DRIVE TO PURCHASE IMMEDIATELY STRAIGHT ( P SERIES ) P 5300 , P 6500 , P 7500 OR WITH ANGLE ( PK SERIES ) PK 5300 , PK 6500 < PK 7500 & ETC ALSO WE ARE INTERESTED IN SUNDSTRAND HYDRAULIC PUMPS & MOTOR FIT IN ZF GEAR BOXES (NEW , REBUILD, TAKEOUT & CORE) CONTACT: MAHMOOD ASKARI PHONE: 819-2050972 FAX: 819-2050972 EMAIL:INFO@PFCDIESEL.CA –––––––––––––––––––––––––––––––– WINCH FOR CAT 525 SKIDDER | WINCH FOR CATERPILLAR LUFKIN 525 YEARS 1996 CONTACT: VARAN FLAVIUS EMAIL: DUOVARANFOREST@YAHOO.COM –––––––––––––––––––––––––––––––– FRONT END LOADER DRESSER FORKS FOR 510 LOADER OR TRADE 4-IN-1 BUCKET FOR DRESSER 510 WITH ACS HOOK-UP CONTACT: CHUCK COHEN PHONE: 630-816-8344 EMAIL: CCOHEN@TIRESNTRACKS.COM –––––––––––––––––––––––––––––––– EXCAVATOR WEIGHING AROUND 35000LBS. WITH AUX. HYDRAULICS CONTACT: JAY ROSKAMP PHONE: 1-217-242-0638 EMAIL:JAY.KAYLA.ROSKAMP13@ GMAIL.COM –––––––––––––––––––––––––––––––– PICKUP TRUCK CONTACT: SERAFIN ABALOS PHONE: 8637814351 EMAIL: ABALOSMARY@YAHOO.COM ––––––––––––––––––––––––––––––––

MIXER TRUCK | 2001 TO 2003 VOLVO VHD WITH MCNELIUS MIXER BODY, AND CUMMINS ENGINE CONTACT: TRENT BERGSTROM PHONE: 763-271-1972 FAX: 763-295-0441 EMAIL:SHOPMANAGER@ JMECOMPANIES.COM –––––––––––––––––––––––––––––––– FIAT ALLIS BAFFLER 73118063 | ESTA PIESA ES DEL CONVERTIDOR DE UNA MOTONIVELADORA FIAT ALLIS 65B.UBICADA EN LIMA PERU CONTACT: ALFREDO MAYURI PHONE: 996737282 EMAIL: ALFMJ_8@HOTMAIL.COM –––––––––––––––––––––––––––––––– CONCRETE FORMS | SYMONS STEEL PLY CONCRETE FORMS. WALL FORMS. C.O.N.C.R.E.T.E. F.O.R.M.S. USED CONCRETE FORMS. CONTACT: ROBBIE PHONE: 630.231.6900 FAX: 630.231.0266 EMAIL:SALES@FORMINGAMERICA.COM –––––––––––––––––––––––––––––––– CUMMINS M 11 C ENGINE | USED OR REBUILT CUMMINS M11C ENGINE #34875520, FAMILY D35, SO# 75684 HP 270 FOR DDT HAUL TRUCK CONTACT: BEAUFORD MULLINS PHONE: 260 497 0500 FAX: 260 490 8217 EMAIL:BEAUFORD@KORTEBROS.COM –––––––––––––––––––––––––––––––– LEEBOY 100F PAVER | LATE MODEL LOW HOUR, NORTHEAST LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMIEQUIP@YAHOO.COM –––––––––––––––––––––––––––––––– CONSTRUCTION | WANTED ANY EXCAVATOR MARSH BUGGIES USED/NEW FOR SALE OR RENT. NEED NOW. PLEASE SEND PRICE, PICS, AND LOCATION TO MY EMAIL THANKS CONTACT: TYLER PALUMBO EMAIL: PALUMBO519@HOTMAIL.COM –––––––––––––––––––––––––––––––– LOG SKIDDER | 540G2. JOHN DEERE SKIDDER WITH CABLE AND A JOHN DEERE DOZER 650 CONTACT: BILLY HEDRICK PHONE: 304-637-8216 | EMAIL:TAMMY_JARED_2006@YAHOO.COM –––––––––––––––––––––––––––––––– 14G MOTOR GRADERS | NEED TO BUY USED CAT 14G MOTOR GRADERS, YEAR MODEL 79 - 95. IF YOU HAVE ANY, PLEASE EMAIL ME WITH PICTURES, SERIAL NUMBER, MACHINE LOCATION AND FINAL OFFER PRICE. CONTACT: AIMN BLBOL PHONE: +971504814823 FAX: +97165355291 EMAIL:INFO@ALWAFAEQUIPMENT.COM –––––––––––––––––––––––––––––––– ZERO TURN LAWN MOWER | WALK BEHIND, RIDER ZERO TURN CONTACT: JAMES PHONE: 601-527-4005 EMAIL: PALHEARN@AOL.COM ––––––––––––––––––––––––––––––––

SUPER COMOSCT DOZER | SUPER COMPACT DOZER CONTACT: MARK EMAIL: MARKPACELLA@MSN.COM –––––––––––––––––––––––––––––––– EXCAVATOR 345 FROM 2000 TO 2005 CONTACT: ALYAZEDY PHONE: 00966549222206 EMAIL: DEERAH2EST@HOTMAIL.COM –––––––––––––––––––––––––––––––– READ RD 90 SCREEN ALL | GOOD CONDITION , WORK READY, NEW ENGLAND LOCATION CONTACT: RICHARD PHONE: 603 828-6100 EMAIL: CMISOLD1@COMCAST.NET –––––––––––––––––––––––––––––––– USED 36" BACKHOE BUCKET EQW TEETH ONE IN NOT TOO BAD SHAPE THAT I CAN MODIFY TO FIT MY MACHINE CONTACT: RICH BROWN PHONE: 312 735 3565 EMAIL: RB1418@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– AC HD5 STEERING CLUTCH YEARS: 1947 49 (BOTH SIDES) | STEERING CLUTCH, BOTH SIDES FOR LATE 1940S ALLIS HD5 CONTACT: HERB PHONE: 301-277-7129 MAIL: HILLE.HERB@GMAIL.COM –––––––––––––––––––––––––––––––– DYNAPAC CC142 | DYNAPAC ROLLER 52" DRUM CONTACT: PAUL PHONE: 5167902272 EMAIL: PCONDOS@CONDOSBROTHERS.COM –––––––––––––––––––––––––––––––– LOADERS, EXCAVATORS CONTACT: IRFAN SIDDIQUI PHONE: 09822566205 EMAIL:IRFAN.SB.ENTERPRISES@ GMAIL.COM –––––––––––––––––––––––––––––––– CAT 920, 930, 950 , 950B, 950D HITACHI EX400-1, 200-1, UH83, UH07-7 CONTACT: MUHAMMAD DAWOOD PHONE: 3013388999 FAX: 3016326405 EMAIL:SALES@SPECIALVEHICLES.US –––––––––––––––––––––––––––––––– RUBBER-TIRED BACKHOE W/4N1 FRONT BUCKET, REAR BUCKET W/THUMB CONTACT: WILLIAM CARTER PHONE: 910 7139072 EMAIL: WILLIAMCARTER40@YAHOO.COM –––––––––––––––––––––––––––––––– JCB3 CX OR 4 CX .2000 HOURS IN EUROPE, GOOD SHAPE. CONTACT: LUBEN RABCHEV PHONE: 359 899 76 70 50 FAX: 702 616 8374 | EMAIL:LUBEN@RABCHEV.COM ––––––––––––––––––––––––––––––––

Page 50 â€¢ October 19, 2013 â€¢ www.constructionequipmentguide.com â€¢ CONSTRUCTION EQUIPMENT GUIDE

Buy. Sell. Fast. Easy. Where online buyers & sellers find the best deals t 5IPVTBOET PG JUFNT GPS TBMF Â‰ USBDUPST USVDLT BOE NPSF t % FUBJMFE HVBSBOUFFE JOTQFDUJPO SFQPSUT Â‰ CVZ XJUI DPOGJEFODF t 4 FMM FRVJQNFOU GBTU Â‰ XF MM JOTQFDU JU MJTU JU BOE TFMM JU JO EBZT

Buy +PJO '3&& UPEBZ BOE TUBSU CJEEJOH (P UP XXX JSPOQMBOFU DPN BOE DMJDL PO i4JHO 6Qw

Sell 8F MM JOTQFDU JU MJTU JU BOE TFMM JU GPS B GBJS QSJDF JO EBZT $BMM ZPVS MPDBM SFQSFTFOUBUJWF BU

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 51

FOLLOW FOLLOW THE THE NE NEW W LLEADER EADER TO TO O OUR UR

UPCOMING

AUCTIONS

2011 JOHN DEERE 872G (DENVER, CO)

UNRESERVED UNRESERVED PUBLIC PUBLIC A AUCTIONS UCTIONS

DENVER, CO OCTOBER DENVER, C O O CTOBER 24 24 LAS VEGAS, NV LAS V EGAS, N V NOVEMBER NOVEMBER 8 PITTSBURGH, PA PITTSBURGH, P A NOVEMBER NOVEMBER 12 12 ONLINE ONLINE ONLY ONLY TTIMED IMED AUCTION AUCTION

2007 CAT D8T (DENVER, CO)

2012 CAT 329EL (PITTSBURGH, PA)

EQU EQUIPMENT IPMENT YARD YA Y ARD N NOVEMBER OVEMBER 20 20 10 10 AM AM C Central entral Time Time Pre-Bidding Pre-Bidding N Nov. ov. 1 13 3 Live Live Bidding Bidding Nov. Nov. 19 19

Our auctions offer a wide variety of equipment makes and models, as well as premium services from the Cat name you already know and trust. Search the full equipment listing and register to bid online at:

www www.catauctions.com .catauctions.com ©2013 Caterpillar Caterpillar.. All Rights Reserved. CA CAT, T, CA CCATERPILLAR, TERPILLAR, T their respective logos and “Caterpillar Yellow,” Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Follow the new leader leader..® www.catauctions.com www .catauctions.com

ONLINE BIDDING AVAILABLE! A VAILABLE!

CAT CA AT AUCTION SERVICES 860 Blue Gentian Road, Suite 100 Eagan, MN 55121 866.984.8782 info@catauctions.com

2004 CAT 938G II (PITTSBURGH, PA)

Equipment subject to change. View updated equipment lists at www www.catauctions.com .catauctions.com

Page 52 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

175 W Central Ave, San Bernardino, CA, 92408

YOUR PREMIER SOURCE FOR MONTHLY PUBLIC AUCTIONS

Saturday

Inspection: Oct 24th & 25th 8am-5pm

Still Accepting Quality Consignments! (866) 372-1700

Oct

26 8:30am

Heavy Equipment & Commercial Truck Auction

San Bernardino, CA featured inventory

1991 Grove RT528C Rough Terrain Crane

2008 Caterpillar 320D LRR Excavator

2007 Caterpiller 320D L Excavator

2011 Caterpillar 950H Wheel Loader

1998 Caterpillar 980G Wheel Loader

2002 AZ-360 Asphalt Zipper

1994 Caterpillar 836S Landfill Compactor

1997 Royer 466 Towable Shredder-Mixer-Separator

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~

! ' 2PcTa_X[[Pa "! 3 ;AA 4gRPePcâ ! & 2PcTa_X[[Pa "! 3 ; 4gRPePcâ ! 2PcTa_X[[Pa ($ 7 FWTT[ ;^PSTa ((' 2PcTa_X[[Pa (' 6 FWTT[ ;^PSTa ! ! 0I "% 0b_WP[c IX__Ta ((# 2PcTa_X[[Pa '"%B ;P]S [[ 2^\_PRcâ ((& A^hTa #%% C^fPQ[T BWaTSSTa <XgTa BT_PaPcâ ('" 2PcTa_X[[Pa '!%2 ;P]S [[ 2^\_PRcâ (( 6^\PR 6C"% B[X_ 5â\ ?PeX]V <PRWX]T ! ' 2PcTa_X[[Pa "! 3 ;AA 4gRPePcâ ! & 2PcTa_X[[Pa "! 3 ; 4gRPePcâ ! 2PcTa_X[[Pa ($ 7 FWTT[ ;^PSTa ((' 2PcTa_X[[Pa (' 6 FWTT[ ;^PSTa ! ! 0I "% 0b_WP[c IX__Ta ((# 2PcTa_X[[Pa '"%B ;P]S [[ 2^\_PRcâ ((& A^hTa #%% C^fPQ[T BWaTSSTa <XgTa BT_PaPcâ ('" 2PcTa_X[[Pa '!%2 ;P]S [[ 2^\_PRcâ (( 6^\PR 6C"% B[X_ 5â\ ?PeX]V <PRWX]T

BID LIVE ONSITE OR ONLINE AT BARNONEAUCTION.COM

Find us online 1983 Caterpillar 826C Landfill Compactor

1991 Gomac GT3600 Slip Form Paving Machine

2006 GMC C8500 Water Truck

1998 International 4700 Water Truck

Barnoneauction123

barnoneauction

bar-none-auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 53

Get your gear, keep your cash to run your business. Buying equipment and trucks at Ritchie Bros. unreserved auctions has always been fair and easy. And now it’s even easier. Until December 31, 2013, you can finance your purchases at any Ritchie Bros. auction in the USA and Canada and enjoy: ▸ 90 days with no payments* ▸ Up to 100% financing with $0 down

▸ Fast pre-approvals, good for up to 90 days ▸ Easy, convenient cross-border financing

Thousands of equipment items and trucks. Hundreds of auctions. No minimum bids. Don’t miss out – apply online or call toll free today.

rbauction.com/90dayspromo | 1.855.331.7237 * No payments for 90 days is a limited time offer from Ritchie Bros. Financial Services. Financing is subject to credit approval and qualified equipment or assets. Minimum contract term of 24 months and qualifying assets valued at $10,000 or higher. Offer is available for deals booked and funded by December 31, 2013, and for items purchased by US or Canadian businesses or sole proprietors at Ritchie Bros. auctions occurring from September 1, 2013 to December 31, 2013 only. First payment will be reflective of date of invoice and at the sole discretion of Ritchie Bros. Financial Services. Additional terms and conditions apply. Contact Ritchie Bros. Financial Services for more information.

Page 54 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Las Vegas, NV Sat., October 19, 2013 For: Late Model Rental Fleet Equipment, Booms, Scissors, Telescopic & Warehouse Forklifts • Orlando, FL Wed., October 23, 2013 For: Very Late Model Construction Equipment • Lima, Peru Sat., October 26, 2013 For: Late Model Earthmoving Construction Equipment, Support & Attachments • Agawam, MA Thurs., October 31, 2013 For: Complete Liquidation, One Owner Construction Equipment • Buffalo, NY Fri., November 1, 2013 For: Late Model Construction & Boring Equipment, Trucks & Trailers • Franklin, NH Sat., November 2, 2013 For: Complete Liquidation of Construction & Rigging Equipment • Pittsburgh, PA Fri., November 8, 2013 For: Very Large Job Completion • Delaware, NJ Sat., November 9, 2013 For: Very Large Contract Completion Auction

• Parkersburg, WV Thurs., December 12, 2013 For: Acquisition Auction • Philadelphia, PA Fri., December 13, 2013 For: Late Model Rental Return Construction Equipment • Atlantic City, NJ Sat., December 14, 2013 For: Very Large Rental Returns of Late Model Construction Equipment • Albany (Greenwich), NY Sat., December 28, 2013 For: Late Model Construction Equipment • Kissimmee, FL February 1-9, 2014 For: 21st Annual Construction Equipment Auction RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631 • El Paso, TX October 22, 2013 • Chehalis, WA October 23, 2013 • Shreveport (Sibley), LA October 24, 2013 • Cincinnati, OH October 25, 2013 • Edmonton, AB October 29-30, 2013 • Bozeman, MT October 31, 2013 • Williston, ND November 7, 2013

• Atlanta, GA Thurs., November 14, 2013 For: Rental Fleet Construction Equipment

• Twin Falls, ID November 8, 2013

• Canton, OH Fri., November 15, 2013 For: John Deere & Cat Construction Equipment

• Farmington, NM November 13, 2013

• Canastota (Syracuse), NY Sat., November 16, 2013 For: Rental Returns of Late Model Construction Equipment • Houston, TX Tues., November 19, 2013 For: Late Model Construction Equipment • Barranquilla, Colombia Sat., November 23, 2013 For: Late Model Construction Equipment – Primarily Rentals

• Detroit, MI November 12, 2013

• Lincoln, NE November 13, 2013 • Indianapolis, IN November 15, 2013 • Tri-Cities, WA November 15, 2013 • Houston, TX November 20-21, 2013 • Chicago, IL December 13, 2013 • St. Louis, MO December 19, 2013 • Orlando, FL February 17-22, 2014

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • San Bernardino, CA Sat., October 26, 2013 For: Heavy Equipment & Commercial Truck BIG IRON www.bigiron.com 800-937-3558 • ONLINE ONLY Wed., October 23, 2013 • ONLINE ONLY Wed., October 30, 2013 • ONLINE ONLY Wed., November 6, 2013 • ONLINE ONLY Wed., November 13, 2013 • ONLINE ONLY Wed., November 20, 2013 • ONLINE ONLY Wed., November 27, 2013 • ONLINE ONLY Wed., December 4, 2013 • ONLINE ONLY Wed., December 11, 2013 • ONLINE ONLY Wed., December 18, 2013 CAT AUCTION SERVICES www.catauctions.com 866-750-9432 • Denver, CO Thurs., October 24, 2013 For: Construction Equipment • Las Vegas, NV Fri., November 8, 2013 For: Construction Equipment • Pittsburgh, PA Tues., November 12, 2013 For: Construction Equipment • Equipment Yard – Online Only Wed., November 20, 2013 For: Construction Equipment DEANCO AUCTIONS www.deancoauction.com 601-656-9768 • Philadelphia, MS November 20-21, 2013 For: Construction Equipment

DON SMOCK AUCTION CO., INC. www.dsaauctions.com 765-778-9277 • Pendleton, IN Fri., December 13, 2013 For: Construction Equipment HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898 • Blairsville, PA Thurs., October 31, 2013 For: Surplus Liquidation Ligonier Construction Co. IRAY AUCTIONS www.iraymn.com 320-968-7230 • Foley, MN Fri., December 6, 2013 For: Heavy Construction Equipment IRON PLANET AUCTIONS www.ironplanet.com 888-433-5426 ONLINE AUCTIONS Go to www.ironplanet.com to view the complete auction schedules, inspection reports and to place your bid! • ONLINE ONLY Thurs., October 24, 2013 JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 800-426-3008 • Kenmore (Seattle), WA Sat., October 26, 2013 For: Rental Yard & Contractor Equipment J.M. WOOD AUCTION COMPANY www.jmwood.com 800-447-7085 • Montgomery, AL Fri., October 25, 2013 For: State of Alabama Dept. of Transportation

• Montgomery, AL December 4-5, 2013 For: Construction Equipment, Trucks & Forestry Equipment KEENAN AUCTION COMPANY www.keenanauction.com 207-885-5100 • Auburn, ME Thurs., October 24, 2013 For: Construction & Road Maintenance Equipment MARTIN & MARTIN AUCTIONEERS, INC. www.mmaauction.com 800-763-2728 • Stoney Fork, KY Tues., November 5, 2013 For: Trucks, Trailers & Related Items • North Charleston, SC Tues., November 12, 2013 For: Construction Equipment • Pelzer, SC Tues., November 19, 2013 For: Construction Equipment MEEKINS AUCTION COMPANY www.meekinsauction.com 800-499-6560 • Fairmont, NC Thurs., November 7, 2013 For: Ronald M. Nye Construction Equipment

PETROWSKY AUCTIONEERS INC. www.petrowskyauctioneers.com

860-642-4200

• Ponce, Puerto Rico Thurs., November 14, 2013 For: Major Job Completion Equipment • Fitchburg, MA Fri., December 6, 2013 For: Excavation & Construction Equipment RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • ONLINE ONLY October 24-29, 2013 STEFFES AUCTIONEERS INC. www.steffesauctioneers.com 701-237-9173 • West Fargo, ND Wed., December 4, 2013 For: Construction Equipment • Litchfield, MN Thurs., December 19, 2013 For: Construction Equipment UTILITY AUCTIONS www.utilityauctions.net 302-530-9103 • Wilmington, DE Fri., October 25, 2013 For: Construction, Utility & Forestry Equipment

• Lumberton, NC Fri., December 27, 2013 For: 19th Annual Contractors VAUGHAN AUCTION GROUP www.vaughanauctiongroup.com Auction 903-873-6777 MYRON BOWLING AUCTIONEERS, INC. www.myronbowling.com 513-738-3311

• Wills Point, TX Thurs., November 7, 2013 For: Fall Contractor’s Public Auction

• Bessemer, AL Thurs., November 14, 2013 For: General Construction/Closing Operations

WAYNE PIKE AUCTION COMPANY www.waynepikeauction.com 763-389-2700

NITKE AUCTIONS www.nitkeauctions.com 715-693-4447

• Princeton, MN Sat., December 7, 2013 For: Construction Equipment

• Wausau, WI October 25-26, 2013 For: Heavy Construction, Truck & Trailer Auctions

WOLFE INDUSTRIAL AUCTIONS, INC. www.wolfeauctions.com 800-443-9580

• Oshkosh, WI Fri., November 1, 2013 For: Online Only Auction Crushing Spread

• York Springs, PA Fri., November 1, 2013 For: Southern PA Contractors

CONSTRUCTION EQUIPMENT GUIDE â€˘ www.constructionequipmentguide.com â€˘ October 19, 2013 â€˘ Page 55

Wilson Proposes Legislation to Solve Predatory Practices ASA from page 1

manufacturing plant, explained that payment has always been a problem in the construction industry. â€œThatâ€™s why the American Subcontractors Association for which I served as national president in 2002-03 was founded in 1966,â€? she noted. â€œWhile a lot has changed about the industry in the last five decades, industry surveys indicate that serious payment problems persist.â€? The ENR summit brought construction industry leaders together to assess various new and changing risks, discuss how to measure and control them and explain how the risks may change in the years ahead. Wilson turned the focus around and back onto contractors. She explained that some payment challenges can be attributed to operational mistakes, which may be quickly rectified, or institutional delays, which can be attributed to standard operating procedures and may be more difficult to overcome.

Decline Could Be Dire, Says Ruane HTF from page 1

ing HTF revenues, either. Revenues from the federal gasoline tax, diesel and truck taxes have returned to their prerecession levels and the CBO projects continued moderate growth in trust fund revenues over the next 10 years. â€œThe simple fact is the user fees that generate the Highway Trust Fundâ€™s revenue stream have not been adjusted for 20 years,â€? according to Ruane. â€œAs a result, the trust fund has limped along from insolvency crisis to insolvency crisis since 2008.â€? He warned that if federal highway and transit investments fall off the cliff, state governments would likely slash their highway construction programs, allowing roads and bridges to deteriorate. Tens of thousands of jobs would be eliminated in the construction and supplier industries, further weakening a U.S. economy that is being kept afloat by the Federal Reserve. Given the current situation for highway and bridge contractors, further decline in the market would have dire consequences, Ruane told the panel. He pointed to ARTBA economic data showing the amount of real pavement work is on pace to decline eight percent in 2013, and the real value of work on highways and bridges has dropped 30 percent since 2009. Average employment by highway and bridge contractors through July 2013 also is down 16 percent compared to pre-recession levels. Ruane noted that if Congress continues the recent practice of transferring resources from other parts of the budget to the HTF, it will have to add $135 billion to the federal deficit over the next 10 years or shift $135 billion from other governmental activities to the trust fund. â€œNeither of these approaches are sound fiscal or economic policy,â€? Ruane said. He called on Congress to finish the job started with MAP21â€™s policy and program reforms by generating new revenue streams to bolster the HTF. â€œThe lone remaining impediment to delivering the national transportation network the American people and the U.S. economy need is a long-term stabilization of the Highway Trust Fundâ€™s revenue foundation.â€? For more information, visit www.artba.org. (This story also can be found on Construction Equipment Guideâ€™s Web site at www.constructionequipmentguide.com.)

â€œBut they donâ€™t have to be and shouldnâ€™t be SOP,â€? she said. â€œIndeed, standard industry documents, including ConsensusDocs â€Ś have addressed these issues with more reasonable payment terms.â€? Wilson urged those in the audience to examine their own companiesâ€™ contract documents and consider modifying some of the provisions so theyâ€™re in the best interest of the project. Many payment problems, however, are the result of predatory practices by bad business operations, she continued. â€œThese firms prey on subcontractors and suppliers that are small, inexperienced, naive or just too hungry,â€? Wilson said. â€œThey use strategies and tactics that delay and even deny

payment to those that can least afford it, with the goal of lining their own pockets.â€? Wilson proposed several legislative solutions for predatory practices, including legislation making pay-if-paid clauses void and unenforceable and legislation allowing contractors and subcontractors to stop work for nonpayment. â€œThe time has long since come when contractors but, particularly subcontractors, canâ€™t continue to have the life squeezed out of us by operational, institutional and predatory slow pay. We must lead the industry â€” kicking and screaming if need be â€” down the road to payment reform. (This story also can be found on Construction Equipment Guideâ€™s Web site at www.constructionequipmentguide.com.)

NO MINIMUMS - NO RESERVES

PUBLIC PU UBL UBLIC UB LIIC CA AUC AUCTI AUCTION UCTI UC C ON CTIO 4'06#. ;#4& '37+2/'06 %1064#%6145 '37+2/'06 4'06#. ;#4& '37+2/'06 %1064#%6145 '37+2/'06 611.5 *'#8; 647%-5 64#+.'45 8'*+%.'5 611.5 *'#8; 647%-5 64#+.'45 8'*+%.'5

9AM - SATURDAY 9AM SATURD SA AT A TUR TUR URD RDAY AY - O OCTOBE OCTOBER CTOBE CT OBER ER 26 26 Preview Preview 8-5p 8-5pm, m, F Friday, riday, O October ctober 25

18226 68th 18226 68th 8th Av A Ave ve NE, NE, Kenmore Kenmo ore (Seattle), ((S Seattl tle), e), WA WA

2#46+#. .+56 1( '37+2/'06

Ĺ– %CUG %: 'ZECXCVQT Ĺ– -WDQVC /KPK 'ZECXCVQTU Ĺ– %CUG ) &Q\GTU Ĺ– %CUG 6CMGWEJK 5MKFUVGGT .QCFGTU Ĺ– ,QJP &GGTG $CEMJQG Ĺ– $QOCI 4QNNGTU

Ĺ– -WDQVC 6TCEVQTU Ĺ– 0GY *QNNCPF 5NQRG /QYGT Ĺ– )GJN 6GNGUEQRKE (QTMNKHVU Ĺ– (QTMNKHVU Ĺ– 5EKUUQTNKHVU Ĺ– )GPKG $QQONKHVU

Ĺ– %JCKP 6TGPEJGTU Ĺ– 6TCKNGT /QWPVGF %JKRRGTU Ĺ– 6TCKNGT /QWPVGF %QORTGUUQTU Ĺ– 6TCEVQT &WOR 4QNNDCEM 6TWEMU Ĺ– 7VKNKV[ 8CP (NCVDGF 6TWEMU Ĺ– %CTU 2KEMWRU 578Ĺ?U

Bid B iid d lli live ive or iv or b bid id o onl online nline line w with iitth th M urp ur ph hyLIVE! hyLIVE! yLIV yL LIVE L LIVE! E! MurphyLIVE!

JJames ames me s G G.. M Murphy urph ur hyy Co. Co o.. &RPPHUFLDO ,QGXVWULDO $XFWLRQHHUV &RPPHUFLDO & RPPHUFLDO ,,QGXVWULDO QGXVWULDO $ $XFWLRQHHUV XFWLRQHHUV

1.800.426.3008 1 .800.426.3008 - 4 425.486.1246 25.486.1246 - murphyauction.com murp rphyaucti tioon.com

Page 56 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

3D Control on Paver Allows for Accurate, Quick Surface Build AIRPORT from page 1 tem and HK Contractors acquired a Trimble double-taxiway airstrip. Serving the regional SPS930 universal total station to provide oil and natural gas exploration markets, the high accuracy 3D machine guidance, requirairfield is essential for transporting supplies ing only one-person operation. The practice and personnel. The $3 million contract to of using a paver to lay a base course is more widen the single 6,800-ft. (2,073 m) runway common in other parts of the world, but is an additional 5 ft. (1.5 m) was let to HK still novel to most American paving contracContractors Inc. in Idaho Falls, Idaho. tors. Started by George Hartwell in 1950 with a “Using 3D control on the paver we were backhoe and a dump truck, HK Contractors able to accurately lay the aggregate base is now one of the largest construction com- course to grade,” Harrigfeld said. “We went panies in eastern Idaho. up from the borrow and did not have to hub “The existing airstrip has been in service the P209 gravel, which would have taken the for 30 years or longer, so it was time for a surveyors at least four days to complete. It rebuild,” said David Harrigfeld, GPS techni- would have taken them as long to hub it as it cian of HK Contractors. “About two or three took us to lay it with the Trimble-equipped years ago, we rebuilt much of the apron paver. Plus, we would have had to finish to Started by George Hartwell in 1950 with a backhoe and a dump truck, HK Contractors is now one of the largest construction companies in eastern Idaho. which had turned to alligator skin.” those hubs.” Harrigfeld received paper plans and elecThe $3 million contract to widen the tronic files for the project from the engineersingle 6,800-ft. (2,073 m) runway an ing firm. additional 5 ft. (1.5 m) was let to “For our construction and paving purposHK Contractors Inc. in Idaho es, we needed to build a 3D digital model Falls, Idaho. from the various materials provided to us,” Harrigfeld said. Harrigfeld used Trimble Business Center — HCE software, which he said is “an invaluable tool that let me build the surface quickly and accurately.” The software is designed to manage, analyze and process site construction data. “Our Trimble machine control systems were all on other time-sensitive sites. The company did not wish to rent another blade with GPS brackets and system but because of the airport completion deadline and knowing when the first “The existing airstrip has been in service snow of the season will for 30 years or longer, so it was time for a likely come we had to rebuild,” said David Harrigfeld, GPS techget creative to finish on nician of HK Contractors. “About two or time,” continued three years ago, we rebuilt much of the Harrigfeld. apron which had turned to alligator skin.” When Harrigfeld arrived on site, they Harrigfeld esti- firm that variance is no were preparing to lay mated that in time greater than a quarter of an inch when meas- have taken without 3D paving technology. Harrigfeld concluded, “The Trimble techthe P209 crushed aggresavings, the tech- uring either laterally or transversely the nology on the paver helped us in the race to gate base course, which nology saved the entire length of the runway. “The 3D paver placed the P209 crushed not only meet the county’s deadline for comaccording to Harrigfeld company seven can be a major chaldays of aggregate aggregate base course, paved the airstrip, pleting the Miley Memorial Field Airport lenge. “If you lay it too base course place- and passed the straight-edge test without any airstrip rehab, but also beat the weather comdeep, you have to use a Serving the regional oil and natural gas ment on this very remedial work required,” Harrigfeld said. ing in for the season. Two or three days after box scraper to avoid exploration markets, the airfield is tight time sched- “It’s not a common practice to lay gravel we completed the job, we had an eight to ten segregation. Or if you essential for transporting supplies and ule job. He also with a paver because it’s extremely abrasive inch snowfall that would have shut that job lay it too thin and need personnel. cites better effi- and I had never done it before so I was wor- down for the year. During our crunch to get to add to it, you have to first scarify the sur- ciency and increased productivity in the ried about the amount of wear we would everything completed we had tremendous have on the paver. As it turns out, the amount support from our local Trimble dealer who face, then re-water the aggregate before lay- asphalt paving. ing it back to grade.” “The Trimble technology allowed us to of wear was minimal compared to the helped get everything set up on the paver To maintain the necessary control and easily and accurately place the 12,600 ton of amount of time we saved and still met the and was on site monitoring the progress. I’m ensure accurate results with the placement of asphalt to the FAA required tolerances which critical tolerances that the system allowed us happy with the work our crew did and the cooperation we received from our dealer. the 6,600 cu. yds. (5,046 cu m) of P209 are plus or minus half an inch to design to have.” In addition to meeting tight tolerances, I’m proud of the results and would have no crushed aggregate base course, Harrigfeld grade,” said Harrigfeld. “Additionally, it opted to use a track asphalt paver equipped helped us achieve the smoothness tolerance using the Trimble PCS900 allowed hesitation ever flying into that airport.” (This story also can be found on Harrigfeld to complete paving operations in with a Trimble PCS900 paving control sys- of plus or minus half an inch to design.” Construction Equipment Guide’s Web site at a shorter time frame — in 17 days instead of tem. With 225 hp (168 kW) gross power, the The FAA requires that paving contractors paver was upgraded to the Trimble 3D sys- use the 16-ft. (4.9 m) straight-edge to con- the at least 25 days he estimates it would www.constructionequipmentguide.com.)

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 57

Experience a sec Experience secure ure on online line or y our indu stry marketplace—just m arketplace—just ffor your industry Buy B uy on online line and get ge ett wh what at yyou ou p paid aid ffor for. or. Sel Sell, l, kno knowing wing yyou’ll ou’ll be p paid. aid. Ex Experience perience pri private vate ssale ale m made ade ffair fair, air, easy easyy and ssafe. affe. Introducing Rit chie Br ro os. EquipmentOne—a EquipmentOne—a sec ure online online marketplace marketplace Introducing Ritchie Bros. secure th att deli vers: that delivers: › Ac quipmentOne sellers, sellers, Access most online—from EquipmentOne cess tto o the mo st equipment equip pmentt lilistings sting gs on line—from E ites Ritchie Bros. unreserved hundreds Rit chie Br os. u nrreserrved auctions and hu ndreds off other ssites Ritchie Bros. Orange Book › Rit chie Br ro os. Or rang ang ge Boo k™ pricing pricing guidance guidance › Open, transparent transparent negotiations negoti ot ations o ›E EquipmentOne quipmentOne T Total otal Buyer Buyer Pr Protection rot otection › Self-serve Selff-serve convenience—easy convenience—easyy to to search, search, list, list, make make offers, offfer errss, negotiate negotiate and ccomplete omplete ttransactions ransactions › A massive massive audience audience off qualified qu buyers buyerrs

Search Se arcch 4+ million million listings listing gs at E EquipmentOne.com quipmentOne.com

Page 58 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com

ACCRUIT LLC .......................................................................13 ALLU GROUP .......................................................................40 BAR NONE AUCTION SAN BERNARDINO CA................................................52 BARGAINS ............................................................................48 CASE CONSTRUCTION.........................................................6 CAT AUCTION SERVICES DENVER CO .................................................................51 CATERPILLAR INC..........................................................20,21 CEG SCALE MODELS............................................................8 CLASSIFIEDS .......................................................................48 CONEXPO...............................................................................7 CONSTRUCTION EQUIPMENT COMPANY .......................25 CONSTRUCTION EQUIPMENT GUIDE WANTED .......................................................................49 WHEEL LOADER PROMO...........................................12 NEWSLETTERS ...........................................................34 CONEX/CONAGG.........................................................42 DOOSAN INFRACORE AMERICA CORP ...........................46 DOOSAN PORTABLE POWER............................................43 DYNAPAC..............................................................................48 EQUIPMENT ONE ................................................................57 FELLING TRAILERS .............................................................35 FINN.......................................................................................19 FLANGE LOCK .......................................................................2 FLECO ATTACHMENTS .......................................................38 FLUID CONTROL SERVICES ..............................................13 GRINDERCRUSHERSCREEN.COM ...................................18 GROVE CRANE ....................................................................28 HELAC CORPORATION.......................................................41 HENDRIX MACHINERY LLC..................................................3 HISTORICAL CONST EQUIPMENT ASSN............................2 HYDRAULICIRCUIT TECHNOLOGY ...................................41

INDEXATOR ..........................................................................39 IROCK CRUSHERS..............................................................24 IRON PLANET.......................................................................50 JAMES G MURPHY CO KENMORE WA..............................................................55 KAWASAKI CONSTRUCTION MACHINERY ......................45 KOBELCO CONST MACH AMER LLC ..................................5 KOMATSU AMERICA CORP ...........................................46,47 KPI-JCI...................................................................................24 LBX ..................................................................................30,31 LIUGONG CONSTRUCTION MACHINERY ..........................9 MAJOR WIRE SCREEN MEDIA LTD...................................20 METSO MINERAL SCREENING..........................................19 METSO MINERALS CRUSHING..........................................27 MIDCO DEMOLITION TOOL CO..........................................22 MOBILE TRACK SOLUTIONS................................................6 NATIONAL ATTACHMENTS .................................................38 NORAM..................................................................................29 PROXIBID..............................................................................52 RANSOME EQUIPMENT SALES LLC.................................49 RECS .....................................................................................41 RITCHIE BROS. AUCTIONEERS.........................................53 RITCHIE BROS. AUCTIONEERS EDMONTON AB............................................................59 ROAD BUILDERS MACHINERY .......................................6,11 ROAD MACHINERY CO .........................................................2 SANDVIK MINING & CONSTRUCTION ..............................23 SCHAEFER ENTERPRISES ................................................38 SENNEBOGEN .....................................................................26 SUPERIOR INDUSTRIES.....................................................22 UNITED RENTALS................................................................60 VAUGHAN AUCTION GROUP LLC .....................................57 YOUNG CORPORATION......................................................40

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 19, 2013 • Page 59

Unreserved public auction

Edmonton, AB October 29–30 (Tue–Wed) | 8 am

2– 2010 HITACHI ZX240LC-3

2007 & 2– 2003 CATERPILLAR 24H

2008 CATERPILLAR D11T

1 OF 8– CATERPILLAR 583R

1 OF 5– 2009 KOMATSU HD605-7E0

Location

Bid with confidence

1500 Sparrow Drive, Nisku, AB T9E 8H6

▸ No minimum bids ▸ Financing available ▸ Inspect and bid on site

Featured items Crawler tractors Wheel loaders Motor graders Excavators Articulated dump trucks Loader backhoes and much more.....

Sell your equipment Call today.

More items added daily Visit rbauction.com for full listings.

2012 CATERPILLAR 966H

rbauction.com | 780.955.2486 Auction Company License #303043 *No payments for 90 days is a limited time offer from Ritchie Bros. Financial Services. Financing is subject to credit approval and qualified equipment or assets. Minimum contract term of 24 months and qualifying assets valued at $10,000 or higher. Offer is available for deals booked and funded by December 31, 2013, and for items purchased by US or Canadian businesses or sole proprietors at Ritchie Bros. auctions occurring September 1, 2013 until December 31, 2013 only. First payment will be reflective of date of invoice and at the sole discretion of Ritchie Bros. Financial Services. Additional terms and conditions apply. Contact Ritchie Bros. Financial Services for more information.

Page 60 • October 19, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Doing whatever it takes to help you get the job done.

We are relentlessly focused on helping you build a safer, better, stronger future, and we have your back

UnitedRentals.com | 800.UR.RENTS

Aerial | Earthmoving | Trench Safety Power & HVAC | Tool Solutions | Technology